Mercurial > hg > graal-compiler
annotate src/share/vm/opto/reg_split.cpp @ 584:49a36a80b0c7
6802499: EA: assert(false,"unknown node on this path")
Summary: Add missing checks for SCMemProj node in Escape analysis code.
Reviewed-by: never
author | kvn |
---|---|
date | Thu, 19 Feb 2009 17:38:53 -0800 |
parents | 91263420e1c6 |
children | 0fbdb4381b99 98cb887364d3 |
rev | line source |
---|---|
0 | 1 /* |
337 | 2 * Copyright 2000-2008 Sun Microsystems, Inc. All Rights Reserved. |
0 | 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
4 * | |
5 * This code is free software; you can redistribute it and/or modify it | |
6 * under the terms of the GNU General Public License version 2 only, as | |
7 * published by the Free Software Foundation. | |
8 * | |
9 * This code is distributed in the hope that it will be useful, but WITHOUT | |
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 * version 2 for more details (a copy is included in the LICENSE file that | |
13 * accompanied this code). | |
14 * | |
15 * You should have received a copy of the GNU General Public License version | |
16 * 2 along with this work; if not, write to the Free Software Foundation, | |
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
18 * | |
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, | |
20 * CA 95054 USA or visit www.sun.com if you need additional information or | |
21 * have any questions. | |
22 * | |
23 */ | |
24 | |
25 #include "incls/_precompiled.incl" | |
26 #include "incls/_reg_split.cpp.incl" | |
27 | |
28 //------------------------------Split-------------------------------------- | |
29 // Walk the graph in RPO and for each lrg which spills, propogate reaching | |
30 // definitions. During propogation, split the live range around regions of | |
31 // High Register Pressure (HRP). If a Def is in a region of Low Register | |
32 // Pressure (LRP), it will not get spilled until we encounter a region of | |
33 // HRP between it and one of its uses. We will spill at the transition | |
34 // point between LRP and HRP. Uses in the HRP region will use the spilled | |
35 // Def. The first Use outside the HRP region will generate a SpillCopy to | |
36 // hoist the live range back up into a register, and all subsequent uses | |
37 // will use that new Def until another HRP region is encountered. Defs in | |
38 // HRP regions will get trailing SpillCopies to push the LRG down into the | |
39 // stack immediately. | |
40 // | |
41 // As a side effect, unlink from (hence make dead) coalesced copies. | |
42 // | |
43 | |
44 static const char out_of_nodes[] = "out of nodes during split"; | |
45 | |
46 //------------------------------get_spillcopy_wide----------------------------- | |
47 // Get a SpillCopy node with wide-enough masks. Use the 'wide-mask', the | |
48 // wide ideal-register spill-mask if possible. If the 'wide-mask' does | |
49 // not cover the input (or output), use the input (or output) mask instead. | |
50 Node *PhaseChaitin::get_spillcopy_wide( Node *def, Node *use, uint uidx ) { | |
51 // If ideal reg doesn't exist we've got a bad schedule happening | |
52 // that is forcing us to spill something that isn't spillable. | |
53 // Bail rather than abort | |
54 int ireg = def->ideal_reg(); | |
55 if( ireg == 0 || ireg == Op_RegFlags ) { | |
415
4d9884b01ba6
6754519: don't emit flag fixup for NaN when condition being tested doesn't need it
never
parents:
337
diff
changeset
|
56 assert(false, "attempted to spill a non-spillable item"); |
0 | 57 C->record_method_not_compilable("attempted to spill a non-spillable item"); |
58 return NULL; | |
59 } | |
60 if (C->check_node_count(NodeLimitFudgeFactor, out_of_nodes)) { | |
61 return NULL; | |
62 } | |
63 const RegMask *i_mask = &def->out_RegMask(); | |
64 const RegMask *w_mask = C->matcher()->idealreg2spillmask[ireg]; | |
65 const RegMask *o_mask = use ? &use->in_RegMask(uidx) : w_mask; | |
66 const RegMask *w_i_mask = w_mask->overlap( *i_mask ) ? w_mask : i_mask; | |
67 const RegMask *w_o_mask; | |
68 | |
69 if( w_mask->overlap( *o_mask ) && // Overlap AND | |
70 ((ireg != Op_RegL && ireg != Op_RegD // Single use or aligned | |
71 #ifdef _LP64 | |
72 && ireg != Op_RegP | |
73 #endif | |
74 ) || o_mask->is_aligned_Pairs()) ) { | |
75 // Don't come here for mis-aligned doubles | |
76 w_o_mask = w_mask; | |
77 } else { // wide ideal mask does not overlap with o_mask | |
78 // Mis-aligned doubles come here and XMM->FPR moves on x86. | |
79 w_o_mask = o_mask; // Must target desired registers | |
80 // Does the ideal-reg-mask overlap with o_mask? I.e., can I use | |
81 // a reg-reg move or do I need a trip across register classes | |
82 // (and thus through memory)? | |
83 if( !C->matcher()->idealreg2regmask[ireg]->overlap( *o_mask) && o_mask->is_UP() ) | |
84 // Here we assume a trip through memory is required. | |
85 w_i_mask = &C->FIRST_STACK_mask(); | |
86 } | |
87 return new (C) MachSpillCopyNode( def, *w_i_mask, *w_o_mask ); | |
88 } | |
89 | |
90 //------------------------------insert_proj------------------------------------ | |
91 // Insert the spill at chosen location. Skip over any interveneing Proj's or | |
92 // Phis. Skip over a CatchNode and projs, inserting in the fall-through block | |
93 // instead. Update high-pressure indices. Create a new live range. | |
94 void PhaseChaitin::insert_proj( Block *b, uint i, Node *spill, uint maxlrg ) { | |
95 // Skip intervening ProjNodes. Do not insert between a ProjNode and | |
96 // its definer. | |
97 while( i < b->_nodes.size() && | |
98 (b->_nodes[i]->is_Proj() || | |
566
91263420e1c6
6791852: assert(b->_nodes[insidx] == n,"got insidx set incorrectly")
kvn
parents:
550
diff
changeset
|
99 b->_nodes[i]->is_Phi() ) ) |
0 | 100 i++; |
101 | |
102 // Do not insert between a call and his Catch | |
103 if( b->_nodes[i]->is_Catch() ) { | |
104 // Put the instruction at the top of the fall-thru block. | |
105 // Find the fall-thru projection | |
106 while( 1 ) { | |
107 const CatchProjNode *cp = b->_nodes[++i]->as_CatchProj(); | |
108 if( cp->_con == CatchProjNode::fall_through_index ) | |
109 break; | |
110 } | |
111 int sidx = i - b->end_idx()-1; | |
112 b = b->_succs[sidx]; // Switch to successor block | |
113 i = 1; // Right at start of block | |
114 } | |
115 | |
116 b->_nodes.insert(i,spill); // Insert node in block | |
117 _cfg._bbs.map(spill->_idx,b); // Update node->block mapping to reflect | |
118 // Adjust the point where we go hi-pressure | |
119 if( i <= b->_ihrp_index ) b->_ihrp_index++; | |
120 if( i <= b->_fhrp_index ) b->_fhrp_index++; | |
121 | |
122 // Assign a new Live Range Number to the SpillCopy and grow | |
123 // the node->live range mapping. | |
124 new_lrg(spill,maxlrg); | |
125 } | |
126 | |
127 //------------------------------split_DEF-------------------------------------- | |
128 // There are four catagories of Split; UP/DOWN x DEF/USE | |
129 // Only three of these really occur as DOWN/USE will always color | |
130 // Any Split with a DEF cannot CISC-Spill now. Thus we need | |
131 // two helper routines, one for Split DEFS (insert after instruction), | |
132 // one for Split USES (insert before instruction). DEF insertion | |
133 // happens inside Split, where the Leaveblock array is updated. | |
134 uint PhaseChaitin::split_DEF( Node *def, Block *b, int loc, uint maxlrg, Node **Reachblock, Node **debug_defs, GrowableArray<uint> splits, int slidx ) { | |
135 #ifdef ASSERT | |
136 // Increment the counter for this lrg | |
137 splits.at_put(slidx, splits.at(slidx)+1); | |
138 #endif | |
139 // If we are spilling the memory op for an implicit null check, at the | |
140 // null check location (ie - null check is in HRP block) we need to do | |
141 // the null-check first, then spill-down in the following block. | |
142 // (The implicit_null_check function ensures the use is also dominated | |
143 // by the branch-not-taken block.) | |
144 Node *be = b->end(); | |
145 if( be->is_MachNullCheck() && be->in(1) == def && def == b->_nodes[loc] ) { | |
146 // Spill goes in the branch-not-taken block | |
147 b = b->_succs[b->_nodes[b->end_idx()+1]->Opcode() == Op_IfTrue]; | |
148 loc = 0; // Just past the Region | |
149 } | |
150 assert( loc >= 0, "must insert past block head" ); | |
151 | |
152 // Get a def-side SpillCopy | |
153 Node *spill = get_spillcopy_wide(def,NULL,0); | |
154 // Did we fail to split?, then bail | |
155 if (!spill) { | |
156 return 0; | |
157 } | |
158 | |
159 // Insert the spill at chosen location | |
160 insert_proj( b, loc+1, spill, maxlrg++); | |
161 | |
162 // Insert new node into Reaches array | |
163 Reachblock[slidx] = spill; | |
164 // Update debug list of reaching down definitions by adding this one | |
165 debug_defs[slidx] = spill; | |
166 | |
167 // return updated count of live ranges | |
168 return maxlrg; | |
169 } | |
170 | |
171 //------------------------------split_USE-------------------------------------- | |
172 // Splits at uses can involve redeffing the LRG, so no CISC Spilling there. | |
173 // Debug uses want to know if def is already stack enabled. | |
174 uint PhaseChaitin::split_USE( Node *def, Block *b, Node *use, uint useidx, uint maxlrg, bool def_down, bool cisc_sp, GrowableArray<uint> splits, int slidx ) { | |
175 #ifdef ASSERT | |
176 // Increment the counter for this lrg | |
177 splits.at_put(slidx, splits.at(slidx)+1); | |
178 #endif | |
179 | |
180 // Some setup stuff for handling debug node uses | |
181 JVMState* jvms = use->jvms(); | |
182 uint debug_start = jvms ? jvms->debug_start() : 999999; | |
183 uint debug_end = jvms ? jvms->debug_end() : 999999; | |
184 | |
185 //------------------------------------------- | |
186 // Check for use of debug info | |
187 if (useidx >= debug_start && useidx < debug_end) { | |
188 // Actually it's perfectly legal for constant debug info to appear | |
189 // just unlikely. In this case the optimizer left a ConI of a 4 | |
190 // as both inputs to a Phi with only a debug use. It's a single-def | |
191 // live range of a rematerializable value. The live range spills, | |
192 // rematerializes and now the ConI directly feeds into the debug info. | |
193 // assert(!def->is_Con(), "constant debug info already constructed directly"); | |
194 | |
195 // Special split handling for Debug Info | |
196 // If DEF is DOWN, just hook the edge and return | |
197 // If DEF is UP, Split it DOWN for this USE. | |
198 if( def->is_Mach() ) { | |
199 if( def_down ) { | |
200 // DEF is DOWN, so connect USE directly to the DEF | |
201 use->set_req(useidx, def); | |
202 } else { | |
203 // Block and index where the use occurs. | |
204 Block *b = _cfg._bbs[use->_idx]; | |
205 // Put the clone just prior to use | |
206 int bindex = b->find_node(use); | |
207 // DEF is UP, so must copy it DOWN and hook in USE | |
208 // Insert SpillCopy before the USE, which uses DEF as its input, | |
209 // and defs a new live range, which is used by this node. | |
210 Node *spill = get_spillcopy_wide(def,use,useidx); | |
211 // did we fail to split? | |
212 if (!spill) { | |
213 // Bail | |
214 return 0; | |
215 } | |
216 // insert into basic block | |
217 insert_proj( b, bindex, spill, maxlrg++ ); | |
218 // Use the new split | |
219 use->set_req(useidx,spill); | |
220 } | |
221 // No further split handling needed for this use | |
222 return maxlrg; | |
223 } // End special splitting for debug info live range | |
224 } // If debug info | |
225 | |
226 // CISC-SPILLING | |
227 // Finally, check to see if USE is CISC-Spillable, and if so, | |
228 // gather_lrg_masks will add the flags bit to its mask, and | |
229 // no use side copy is needed. This frees up the live range | |
230 // register choices without causing copy coalescing, etc. | |
231 if( UseCISCSpill && cisc_sp ) { | |
232 int inp = use->cisc_operand(); | |
233 if( inp != AdlcVMDeps::Not_cisc_spillable ) | |
234 // Convert operand number to edge index number | |
235 inp = use->as_Mach()->operand_index(inp); | |
236 if( inp == (int)useidx ) { | |
237 use->set_req(useidx, def); | |
238 #ifndef PRODUCT | |
239 if( TraceCISCSpill ) { | |
240 tty->print(" set_split: "); | |
241 use->dump(); | |
242 } | |
243 #endif | |
244 return maxlrg; | |
245 } | |
246 } | |
247 | |
248 //------------------------------------------- | |
249 // Insert a Copy before the use | |
250 | |
251 // Block and index where the use occurs. | |
252 int bindex; | |
253 // Phi input spill-copys belong at the end of the prior block | |
254 if( use->is_Phi() ) { | |
255 b = _cfg._bbs[b->pred(useidx)->_idx]; | |
256 bindex = b->end_idx(); | |
257 } else { | |
258 // Put the clone just prior to use | |
259 bindex = b->find_node(use); | |
260 } | |
261 | |
262 Node *spill = get_spillcopy_wide( def, use, useidx ); | |
263 if( !spill ) return 0; // Bailed out | |
264 // Insert SpillCopy before the USE, which uses the reaching DEF as | |
265 // its input, and defs a new live range, which is used by this node. | |
266 insert_proj( b, bindex, spill, maxlrg++ ); | |
267 // Use the spill/clone | |
268 use->set_req(useidx,spill); | |
269 | |
270 // return updated live range count | |
271 return maxlrg; | |
272 } | |
273 | |
274 //------------------------------split_Rematerialize---------------------------- | |
275 // Clone a local copy of the def. | |
276 Node *PhaseChaitin::split_Rematerialize( Node *def, Block *b, uint insidx, uint &maxlrg, GrowableArray<uint> splits, int slidx, uint *lrg2reach, Node **Reachblock, bool walkThru ) { | |
277 // The input live ranges will be stretched to the site of the new | |
278 // instruction. They might be stretched past a def and will thus | |
279 // have the old and new values of the same live range alive at the | |
280 // same time - a definite no-no. Split out private copies of | |
281 // the inputs. | |
282 if( def->req() > 1 ) { | |
283 for( uint i = 1; i < def->req(); i++ ) { | |
284 Node *in = def->in(i); | |
285 // Check for single-def (LRG cannot redefined) | |
286 uint lidx = n2lidx(in); | |
287 if( lidx >= _maxlrg ) continue; // Value is a recent spill-copy | |
295
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
288 if (lrgs(lidx).is_singledef()) continue; |
0 | 289 |
290 Block *b_def = _cfg._bbs[def->_idx]; | |
291 int idx_def = b_def->find_node(def); | |
292 Node *in_spill = get_spillcopy_wide( in, def, i ); | |
293 if( !in_spill ) return 0; // Bailed out | |
294 insert_proj(b_def,idx_def,in_spill,maxlrg++); | |
295 if( b_def == b ) | |
296 insidx++; | |
297 def->set_req(i,in_spill); | |
298 } | |
299 } | |
300 | |
301 Node *spill = def->clone(); | |
302 if (C->check_node_count(NodeLimitFudgeFactor, out_of_nodes)) { | |
303 // Check when generating nodes | |
304 return 0; | |
305 } | |
306 | |
307 // See if any inputs are currently being spilled, and take the | |
308 // latest copy of spilled inputs. | |
309 if( spill->req() > 1 ) { | |
310 for( uint i = 1; i < spill->req(); i++ ) { | |
311 Node *in = spill->in(i); | |
312 uint lidx = Find_id(in); | |
313 | |
314 // Walk backwards thru spill copy node intermediates | |
295
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
315 if (walkThru) { |
0 | 316 while ( in->is_SpillCopy() && lidx >= _maxlrg ) { |
317 in = in->in(1); | |
318 lidx = Find_id(in); | |
319 } | |
320 | |
295
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
321 if (lidx < _maxlrg && lrgs(lidx).is_multidef()) { |
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
322 // walkThru found a multidef LRG, which is unsafe to use, so |
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
323 // just keep the original def used in the clone. |
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
324 in = spill->in(i); |
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
325 lidx = Find_id(in); |
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
326 } |
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
327 } |
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
328 |
0 | 329 if( lidx < _maxlrg && lrgs(lidx).reg() >= LRG::SPILL_REG ) { |
330 Node *rdef = Reachblock[lrg2reach[lidx]]; | |
331 if( rdef ) spill->set_req(i,rdef); | |
332 } | |
333 } | |
334 } | |
335 | |
336 | |
337 assert( spill->out_RegMask().is_UP(), "rematerialize to a reg" ); | |
338 // Rematerialized op is def->spilled+1 | |
339 set_was_spilled(spill); | |
340 if( _spilled_once.test(def->_idx) ) | |
341 set_was_spilled(spill); | |
342 | |
343 insert_proj( b, insidx, spill, maxlrg++ ); | |
344 #ifdef ASSERT | |
345 // Increment the counter for this lrg | |
346 splits.at_put(slidx, splits.at(slidx)+1); | |
347 #endif | |
348 // See if the cloned def kills any flags, and copy those kills as well | |
349 uint i = insidx+1; | |
350 if( clone_projs( b, i, def, spill, maxlrg ) ) { | |
351 // Adjust the point where we go hi-pressure | |
352 if( i <= b->_ihrp_index ) b->_ihrp_index++; | |
353 if( i <= b->_fhrp_index ) b->_fhrp_index++; | |
354 } | |
355 | |
356 return spill; | |
357 } | |
358 | |
359 //------------------------------is_high_pressure------------------------------- | |
360 // Function to compute whether or not this live range is "high pressure" | |
361 // in this block - whether it spills eagerly or not. | |
362 bool PhaseChaitin::is_high_pressure( Block *b, LRG *lrg, uint insidx ) { | |
363 if( lrg->_was_spilled1 ) return true; | |
364 // Forced spilling due to conflict? Then split only at binding uses | |
365 // or defs, not for supposed capacity problems. | |
366 // CNC - Turned off 7/8/99, causes too much spilling | |
367 // if( lrg->_is_bound ) return false; | |
368 | |
369 // Not yet reached the high-pressure cutoff point, so low pressure | |
370 uint hrp_idx = lrg->_is_float ? b->_fhrp_index : b->_ihrp_index; | |
371 if( insidx < hrp_idx ) return false; | |
372 // Register pressure for the block as a whole depends on reg class | |
373 int block_pres = lrg->_is_float ? b->_freg_pressure : b->_reg_pressure; | |
374 // Bound live ranges will split at the binding points first; | |
375 // Intermediate splits should assume the live range's register set | |
376 // got "freed up" and that num_regs will become INT_PRESSURE. | |
377 int bound_pres = lrg->_is_float ? FLOATPRESSURE : INTPRESSURE; | |
378 // Effective register pressure limit. | |
379 int lrg_pres = (lrg->get_invalid_mask_size() > lrg->num_regs()) | |
380 ? (lrg->get_invalid_mask_size() >> (lrg->num_regs()-1)) : bound_pres; | |
381 // High pressure if block pressure requires more register freedom | |
382 // than live range has. | |
383 return block_pres >= lrg_pres; | |
384 } | |
385 | |
386 | |
387 //------------------------------prompt_use--------------------------------- | |
388 // True if lidx is used before any real register is def'd in the block | |
389 bool PhaseChaitin::prompt_use( Block *b, uint lidx ) { | |
390 if( lrgs(lidx)._was_spilled2 ) return false; | |
391 | |
392 // Scan block for 1st use. | |
393 for( uint i = 1; i <= b->end_idx(); i++ ) { | |
394 Node *n = b->_nodes[i]; | |
395 // Ignore PHI use, these can be up or down | |
396 if( n->is_Phi() ) continue; | |
397 for( uint j = 1; j < n->req(); j++ ) | |
398 if( Find_id(n->in(j)) == lidx ) | |
399 return true; // Found 1st use! | |
400 if( n->out_RegMask().is_NotEmpty() ) return false; | |
401 } | |
402 return false; | |
403 } | |
404 | |
405 //------------------------------Split-------------------------------------- | |
406 //----------Split Routine---------- | |
407 // ***** NEW SPLITTING HEURISTIC ***** | |
408 // DEFS: If the DEF is in a High Register Pressure(HRP) Block, split there. | |
409 // Else, no split unless there is a HRP block between a DEF and | |
410 // one of its uses, and then split at the HRP block. | |
411 // | |
412 // USES: If USE is in HRP, split at use to leave main LRG on stack. | |
413 // Else, hoist LRG back up to register only (ie - split is also DEF) | |
414 // We will compute a new maxlrg as we go | |
415 uint PhaseChaitin::Split( uint maxlrg ) { | |
416 NOT_PRODUCT( Compile::TracePhase t3("regAllocSplit", &_t_regAllocSplit, TimeCompiler); ) | |
417 | |
418 uint bidx, pidx, slidx, insidx, inpidx, twoidx; | |
419 uint non_phi = 1, spill_cnt = 0; | |
420 Node **Reachblock; | |
421 Node *n1, *n2, *n3; | |
422 Node_List *defs,*phis; | |
423 bool *UPblock; | |
424 bool u1, u2, u3; | |
425 Block *b, *pred; | |
426 PhiNode *phi; | |
427 GrowableArray<uint> lidxs; | |
428 | |
429 // Array of counters to count splits per live range | |
430 GrowableArray<uint> splits; | |
431 | |
432 //----------Setup Code---------- | |
433 // Create a convenient mapping from lrg numbers to reaches/leaves indices | |
434 uint *lrg2reach = NEW_RESOURCE_ARRAY( uint, _maxlrg ); | |
435 // Keep track of DEFS & Phis for later passes | |
436 defs = new Node_List(); | |
437 phis = new Node_List(); | |
438 // Gather info on which LRG's are spilling, and build maps | |
439 for( bidx = 1; bidx < _maxlrg; bidx++ ) { | |
440 if( lrgs(bidx).alive() && lrgs(bidx).reg() >= LRG::SPILL_REG ) { | |
441 assert(!lrgs(bidx).mask().is_AllStack(),"AllStack should color"); | |
442 lrg2reach[bidx] = spill_cnt; | |
443 spill_cnt++; | |
444 lidxs.append(bidx); | |
445 #ifdef ASSERT | |
446 // Initialize the split counts to zero | |
447 splits.append(0); | |
448 #endif | |
449 #ifndef PRODUCT | |
450 if( PrintOpto && WizardMode && lrgs(bidx)._was_spilled1 ) | |
451 tty->print_cr("Warning, 2nd spill of L%d",bidx); | |
452 #endif | |
453 } | |
454 } | |
455 | |
456 // Create side arrays for propagating reaching defs info. | |
457 // Each block needs a node pointer for each spilling live range for the | |
458 // Def which is live into the block. Phi nodes handle multiple input | |
459 // Defs by querying the output of their predecessor blocks and resolving | |
460 // them to a single Def at the phi. The pointer is updated for each | |
461 // Def in the block, and then becomes the output for the block when | |
462 // processing of the block is complete. We also need to track whether | |
463 // a Def is UP or DOWN. UP means that it should get a register (ie - | |
464 // it is always in LRP regions), and DOWN means that it is probably | |
465 // on the stack (ie - it crosses HRP regions). | |
466 Node ***Reaches = NEW_RESOURCE_ARRAY( Node**, _cfg._num_blocks+1 ); | |
467 bool **UP = NEW_RESOURCE_ARRAY( bool*, _cfg._num_blocks+1 ); | |
468 Node **debug_defs = NEW_RESOURCE_ARRAY( Node*, spill_cnt ); | |
469 VectorSet **UP_entry= NEW_RESOURCE_ARRAY( VectorSet*, spill_cnt ); | |
470 | |
471 // Initialize Reaches & UP | |
472 for( bidx = 0; bidx < _cfg._num_blocks+1; bidx++ ) { | |
473 Reaches[bidx] = NEW_RESOURCE_ARRAY( Node*, spill_cnt ); | |
474 UP[bidx] = NEW_RESOURCE_ARRAY( bool, spill_cnt ); | |
475 Node **Reachblock = Reaches[bidx]; | |
476 bool *UPblock = UP[bidx]; | |
477 for( slidx = 0; slidx < spill_cnt; slidx++ ) { | |
478 UPblock[slidx] = true; // Assume they start in registers | |
479 Reachblock[slidx] = NULL; // Assume that no def is present | |
480 } | |
481 } | |
482 | |
483 // Initialize to array of empty vectorsets | |
484 for( slidx = 0; slidx < spill_cnt; slidx++ ) | |
485 UP_entry[slidx] = new VectorSet(Thread::current()->resource_area()); | |
486 | |
487 //----------PASS 1---------- | |
488 //----------Propagation & Node Insertion Code---------- | |
489 // Walk the Blocks in RPO for DEF & USE info | |
490 for( bidx = 0; bidx < _cfg._num_blocks; bidx++ ) { | |
491 | |
492 if (C->check_node_count(spill_cnt, out_of_nodes)) { | |
493 return 0; | |
494 } | |
495 | |
496 b = _cfg._blocks[bidx]; | |
497 // Reaches & UP arrays for this block | |
498 Reachblock = Reaches[b->_pre_order]; | |
499 UPblock = UP[b->_pre_order]; | |
500 // Reset counter of start of non-Phi nodes in block | |
501 non_phi = 1; | |
502 //----------Block Entry Handling---------- | |
503 // Check for need to insert a new phi | |
504 // Cycle through this block's predecessors, collecting Reaches | |
505 // info for each spilled LRG. If they are identical, no phi is | |
506 // needed. If they differ, check for a phi, and insert if missing, | |
507 // or update edges if present. Set current block's Reaches set to | |
508 // be either the phi's or the reaching def, as appropriate. | |
509 // If no Phi is needed, check if the LRG needs to spill on entry | |
510 // to the block due to HRP. | |
511 for( slidx = 0; slidx < spill_cnt; slidx++ ) { | |
512 // Grab the live range number | |
513 uint lidx = lidxs.at(slidx); | |
514 // Do not bother splitting or putting in Phis for single-def | |
515 // rematerialized live ranges. This happens alot to constants | |
516 // with long live ranges. | |
295
ea18057223c4
6732194: Data corruption dependent on -server/-client/-Xbatch
never
parents:
0
diff
changeset
|
517 if( lrgs(lidx).is_singledef() && |
0 | 518 lrgs(lidx)._def->rematerialize() ) { |
519 // reset the Reaches & UP entries | |
520 Reachblock[slidx] = lrgs(lidx)._def; | |
521 UPblock[slidx] = true; | |
522 // Record following instruction in case 'n' rematerializes and | |
523 // kills flags | |
524 Block *pred1 = _cfg._bbs[b->pred(1)->_idx]; | |
525 continue; | |
526 } | |
527 | |
528 // Initialize needs_phi and needs_split | |
529 bool needs_phi = false; | |
530 bool needs_split = false; | |
330
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
531 bool has_phi = false; |
0 | 532 // Walk the predecessor blocks to check inputs for that live range |
533 // Grab predecessor block header | |
534 n1 = b->pred(1); | |
535 // Grab the appropriate reaching def info for inpidx | |
536 pred = _cfg._bbs[n1->_idx]; | |
537 pidx = pred->_pre_order; | |
538 Node **Ltmp = Reaches[pidx]; | |
539 bool *Utmp = UP[pidx]; | |
540 n1 = Ltmp[slidx]; | |
541 u1 = Utmp[slidx]; | |
542 // Initialize node for saving type info | |
543 n3 = n1; | |
544 u3 = u1; | |
545 | |
546 // Compare inputs to see if a Phi is needed | |
547 for( inpidx = 2; inpidx < b->num_preds(); inpidx++ ) { | |
548 // Grab predecessor block headers | |
549 n2 = b->pred(inpidx); | |
550 // Grab the appropriate reaching def info for inpidx | |
551 pred = _cfg._bbs[n2->_idx]; | |
552 pidx = pred->_pre_order; | |
553 Ltmp = Reaches[pidx]; | |
554 Utmp = UP[pidx]; | |
555 n2 = Ltmp[slidx]; | |
556 u2 = Utmp[slidx]; | |
557 // For each LRG, decide if a phi is necessary | |
558 if( n1 != n2 ) { | |
559 needs_phi = true; | |
560 } | |
561 // See if the phi has mismatched inputs, UP vs. DOWN | |
562 if( n1 && n2 && (u1 != u2) ) { | |
563 needs_split = true; | |
564 } | |
565 // Move n2/u2 to n1/u1 for next iteration | |
566 n1 = n2; | |
567 u1 = u2; | |
568 // Preserve a non-NULL predecessor for later type referencing | |
569 if( (n3 == NULL) && (n2 != NULL) ){ | |
570 n3 = n2; | |
571 u3 = u2; | |
572 } | |
573 } // End for all potential Phi inputs | |
574 | |
330
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
575 // check block for appropriate phinode & update edges |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
576 for( insidx = 1; insidx <= b->end_idx(); insidx++ ) { |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
577 n1 = b->_nodes[insidx]; |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
578 // bail if this is not a phi |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
579 phi = n1->is_Phi() ? n1->as_Phi() : NULL; |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
580 if( phi == NULL ) { |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
581 // Keep track of index of first non-PhiNode instruction in block |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
582 non_phi = insidx; |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
583 // break out of the for loop as we have handled all phi nodes |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
584 break; |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
585 } |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
586 // must be looking at a phi |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
587 if( Find_id(n1) == lidxs.at(slidx) ) { |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
588 // found the necessary phi |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
589 needs_phi = false; |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
590 has_phi = true; |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
591 // initialize the Reaches entry for this LRG |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
592 Reachblock[slidx] = phi; |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
593 break; |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
594 } // end if found correct phi |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
595 } // end for all phi's |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
596 |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
597 // If a phi is needed or exist, check for it |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
598 if( needs_phi || has_phi ) { |
0 | 599 // add new phinode if one not already found |
600 if( needs_phi ) { | |
601 // create a new phi node and insert it into the block | |
602 // type is taken from left over pointer to a predecessor | |
603 assert(n3,"No non-NULL reaching DEF for a Phi"); | |
604 phi = new (C, b->num_preds()) PhiNode(b->head(), n3->bottom_type()); | |
605 // initialize the Reaches entry for this LRG | |
606 Reachblock[slidx] = phi; | |
607 | |
608 // add node to block & node_to_block mapping | |
609 insert_proj( b, insidx++, phi, maxlrg++ ); | |
610 non_phi++; | |
611 // Reset new phi's mapping to be the spilling live range | |
612 _names.map(phi->_idx, lidx); | |
613 assert(Find_id(phi) == lidx,"Bad update on Union-Find mapping"); | |
614 } // end if not found correct phi | |
615 // Here you have either found or created the Phi, so record it | |
616 assert(phi != NULL,"Must have a Phi Node here"); | |
617 phis->push(phi); | |
618 // PhiNodes should either force the LRG UP or DOWN depending | |
619 // on its inputs and the register pressure in the Phi's block. | |
620 UPblock[slidx] = true; // Assume new DEF is UP | |
621 // If entering a high-pressure area with no immediate use, | |
622 // assume Phi is DOWN | |
623 if( is_high_pressure( b, &lrgs(lidx), b->end_idx()) && !prompt_use(b,lidx) ) | |
624 UPblock[slidx] = false; | |
625 // If we are not split up/down and all inputs are down, then we | |
626 // are down | |
627 if( !needs_split && !u3 ) | |
628 UPblock[slidx] = false; | |
629 } // end if phi is needed | |
630 | |
631 // Do not need a phi, so grab the reaching DEF | |
632 else { | |
633 // Grab predecessor block header | |
634 n1 = b->pred(1); | |
635 // Grab the appropriate reaching def info for k | |
636 pred = _cfg._bbs[n1->_idx]; | |
637 pidx = pred->_pre_order; | |
638 Node **Ltmp = Reaches[pidx]; | |
639 bool *Utmp = UP[pidx]; | |
640 // reset the Reaches & UP entries | |
641 Reachblock[slidx] = Ltmp[slidx]; | |
642 UPblock[slidx] = Utmp[slidx]; | |
643 } // end else no Phi is needed | |
644 } // end for all spilling live ranges | |
645 // DEBUG | |
646 #ifndef PRODUCT | |
647 if(trace_spilling()) { | |
648 tty->print("/`\nBlock %d: ", b->_pre_order); | |
649 tty->print("Reaching Definitions after Phi handling\n"); | |
650 for( uint x = 0; x < spill_cnt; x++ ) { | |
651 tty->print("Spill Idx %d: UP %d: Node\n",x,UPblock[x]); | |
652 if( Reachblock[x] ) | |
653 Reachblock[x]->dump(); | |
654 else | |
655 tty->print("Undefined\n"); | |
656 } | |
657 } | |
658 #endif | |
659 | |
660 //----------Non-Phi Node Splitting---------- | |
661 // Since phi-nodes have now been handled, the Reachblock array for this | |
662 // block is initialized with the correct starting value for the defs which | |
663 // reach non-phi instructions in this block. Thus, process non-phi | |
664 // instructions normally, inserting SpillCopy nodes for all spill | |
665 // locations. | |
666 | |
667 // Memoize any DOWN reaching definitions for use as DEBUG info | |
668 for( insidx = 0; insidx < spill_cnt; insidx++ ) { | |
669 debug_defs[insidx] = (UPblock[insidx]) ? NULL : Reachblock[insidx]; | |
670 if( UPblock[insidx] ) // Memoize UP decision at block start | |
671 UP_entry[insidx]->set( b->_pre_order ); | |
672 } | |
673 | |
674 //----------Walk Instructions in the Block and Split---------- | |
675 // For all non-phi instructions in the block | |
676 for( insidx = 1; insidx <= b->end_idx(); insidx++ ) { | |
677 Node *n = b->_nodes[insidx]; | |
678 // Find the defining Node's live range index | |
679 uint defidx = Find_id(n); | |
680 uint cnt = n->req(); | |
681 | |
682 if( n->is_Phi() ) { | |
683 // Skip phi nodes after removing dead copies. | |
684 if( defidx < _maxlrg ) { | |
685 // Check for useless Phis. These appear if we spill, then | |
686 // coalesce away copies. Dont touch Phis in spilling live | |
687 // ranges; they are busy getting modifed in this pass. | |
688 if( lrgs(defidx).reg() < LRG::SPILL_REG ) { | |
689 uint i; | |
690 Node *u = NULL; | |
691 // Look for the Phi merging 2 unique inputs | |
692 for( i = 1; i < cnt; i++ ) { | |
693 // Ignore repeats and self | |
694 if( n->in(i) != u && n->in(i) != n ) { | |
695 // Found a unique input | |
696 if( u != NULL ) // If it's the 2nd, bail out | |
697 break; | |
698 u = n->in(i); // Else record it | |
699 } | |
700 } | |
701 assert( u, "at least 1 valid input expected" ); | |
330
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
702 if( i >= cnt ) { // Found one unique input |
1c6e3bfb543a
6746892: Register Allocator does not process a data phi with one unique input correctly
kvn
parents:
295
diff
changeset
|
703 assert(Find_id(n) == Find_id(u), "should be the same lrg"); |
0 | 704 n->replace_by(u); // Then replace with unique input |
705 n->disconnect_inputs(NULL); | |
706 b->_nodes.remove(insidx); | |
707 insidx--; | |
708 b->_ihrp_index--; | |
709 b->_fhrp_index--; | |
710 } | |
711 } | |
712 } | |
713 continue; | |
714 } | |
715 assert( insidx > b->_ihrp_index || | |
716 (b->_reg_pressure < (uint)INTPRESSURE) || | |
717 b->_ihrp_index > 4000000 || | |
718 b->_ihrp_index >= b->end_idx() || | |
719 !b->_nodes[b->_ihrp_index]->is_Proj(), "" ); | |
720 assert( insidx > b->_fhrp_index || | |
721 (b->_freg_pressure < (uint)FLOATPRESSURE) || | |
722 b->_fhrp_index > 4000000 || | |
723 b->_fhrp_index >= b->end_idx() || | |
724 !b->_nodes[b->_fhrp_index]->is_Proj(), "" ); | |
725 | |
726 // ********** Handle Crossing HRP Boundry ********** | |
727 if( (insidx == b->_ihrp_index) || (insidx == b->_fhrp_index) ) { | |
728 for( slidx = 0; slidx < spill_cnt; slidx++ ) { | |
729 // Check for need to split at HRP boundry - split if UP | |
730 n1 = Reachblock[slidx]; | |
731 // bail out if no reaching DEF | |
732 if( n1 == NULL ) continue; | |
733 // bail out if live range is 'isolated' around inner loop | |
734 uint lidx = lidxs.at(slidx); | |
735 // If live range is currently UP | |
736 if( UPblock[slidx] ) { | |
737 // set location to insert spills at | |
738 // SPLIT DOWN HERE - NO CISC SPILL | |
739 if( is_high_pressure( b, &lrgs(lidx), insidx ) && | |
740 !n1->rematerialize() ) { | |
741 // If there is already a valid stack definition available, use it | |
742 if( debug_defs[slidx] != NULL ) { | |
743 Reachblock[slidx] = debug_defs[slidx]; | |
744 } | |
745 else { | |
746 // Insert point is just past last use or def in the block | |
747 int insert_point = insidx-1; | |
748 while( insert_point > 0 ) { | |
749 Node *n = b->_nodes[insert_point]; | |
750 // Hit top of block? Quit going backwards | |
751 if( n->is_Phi() ) break; | |
752 // Found a def? Better split after it. | |
753 if( n2lidx(n) == lidx ) break; | |
754 // Look for a use | |
755 uint i; | |
756 for( i = 1; i < n->req(); i++ ) | |
757 if( n2lidx(n->in(i)) == lidx ) | |
758 break; | |
759 // Found a use? Better split after it. | |
760 if( i < n->req() ) break; | |
761 insert_point--; | |
762 } | |
763 maxlrg = split_DEF( n1, b, insert_point, maxlrg, Reachblock, debug_defs, splits, slidx); | |
764 // If it wasn't split bail | |
765 if (!maxlrg) { | |
766 return 0; | |
767 } | |
768 insidx++; | |
769 } | |
770 // This is a new DEF, so update UP | |
771 UPblock[slidx] = false; | |
772 #ifndef PRODUCT | |
773 // DEBUG | |
774 if( trace_spilling() ) { | |
775 tty->print("\nNew Split DOWN DEF of Spill Idx "); | |
776 tty->print("%d, UP %d:\n",slidx,false); | |
777 n1->dump(); | |
778 } | |
779 #endif | |
780 } | |
781 } // end if LRG is UP | |
782 } // end for all spilling live ranges | |
783 assert( b->_nodes[insidx] == n, "got insidx set incorrectly" ); | |
784 } // end if crossing HRP Boundry | |
785 | |
786 // If the LRG index is oob, then this is a new spillcopy, skip it. | |
787 if( defidx >= _maxlrg ) { | |
788 continue; | |
789 } | |
790 LRG &deflrg = lrgs(defidx); | |
791 uint copyidx = n->is_Copy(); | |
792 // Remove coalesced copy from CFG | |
793 if( copyidx && defidx == n2lidx(n->in(copyidx)) ) { | |
794 n->replace_by( n->in(copyidx) ); | |
795 n->set_req( copyidx, NULL ); | |
796 b->_nodes.remove(insidx--); | |
797 b->_ihrp_index--; // Adjust the point where we go hi-pressure | |
798 b->_fhrp_index--; | |
799 continue; | |
800 } | |
801 | |
802 #define DERIVED 0 | |
803 | |
804 // ********** Handle USES ********** | |
805 bool nullcheck = false; | |
806 // Implicit null checks never use the spilled value | |
807 if( n->is_MachNullCheck() ) | |
808 nullcheck = true; | |
809 if( !nullcheck ) { | |
810 // Search all inputs for a Spill-USE | |
811 JVMState* jvms = n->jvms(); | |
812 uint oopoff = jvms ? jvms->oopoff() : cnt; | |
813 uint old_last = cnt - 1; | |
814 for( inpidx = 1; inpidx < cnt; inpidx++ ) { | |
815 // Derived/base pairs may be added to our inputs during this loop. | |
816 // If inpidx > old_last, then one of these new inputs is being | |
817 // handled. Skip the derived part of the pair, but process | |
818 // the base like any other input. | |
819 if( inpidx > old_last && ((inpidx - oopoff) & 1) == DERIVED ) { | |
820 continue; // skip derived_debug added below | |
821 } | |
822 // Get lidx of input | |
823 uint useidx = Find_id(n->in(inpidx)); | |
824 // Not a brand-new split, and it is a spill use | |
825 if( useidx < _maxlrg && lrgs(useidx).reg() >= LRG::SPILL_REG ) { | |
826 // Check for valid reaching DEF | |
827 slidx = lrg2reach[useidx]; | |
828 Node *def = Reachblock[slidx]; | |
829 assert( def != NULL, "Using Undefined Value in Split()\n"); | |
830 | |
831 // (+++) %%%% remove this in favor of pre-pass in matcher.cpp | |
832 // monitor references do not care where they live, so just hook | |
833 if ( jvms && jvms->is_monitor_use(inpidx) ) { | |
834 // The effect of this clone is to drop the node out of the block, | |
835 // so that the allocator does not see it anymore, and therefore | |
836 // does not attempt to assign it a register. | |
837 def = def->clone(); | |
838 _names.extend(def->_idx,0); | |
839 _cfg._bbs.map(def->_idx,b); | |
840 n->set_req(inpidx, def); | |
841 if (C->check_node_count(NodeLimitFudgeFactor, out_of_nodes)) { | |
842 return 0; | |
843 } | |
844 continue; | |
845 } | |
846 | |
847 // Rematerializable? Then clone def at use site instead | |
848 // of store/load | |
849 if( def->rematerialize() ) { | |
850 int old_size = b->_nodes.size(); | |
851 def = split_Rematerialize( def, b, insidx, maxlrg, splits, slidx, lrg2reach, Reachblock, true ); | |
852 if( !def ) return 0; // Bail out | |
853 insidx += b->_nodes.size()-old_size; | |
854 } | |
855 | |
856 MachNode *mach = n->is_Mach() ? n->as_Mach() : NULL; | |
857 // Base pointers and oopmap references do not care where they live. | |
858 if ((inpidx >= oopoff) || | |
859 (mach && mach->ideal_Opcode() == Op_AddP && inpidx == AddPNode::Base)) { | |
860 if (def->rematerialize() && lrgs(useidx)._was_spilled2) { | |
861 // This def has been rematerialized a couple of times without | |
862 // progress. It doesn't care if it lives UP or DOWN, so | |
863 // spill it down now. | |
864 maxlrg = split_USE(def,b,n,inpidx,maxlrg,false,false,splits,slidx); | |
865 // If it wasn't split bail | |
866 if (!maxlrg) { | |
867 return 0; | |
868 } | |
869 insidx++; // Reset iterator to skip USE side split | |
870 } else { | |
871 // Just hook the def edge | |
872 n->set_req(inpidx, def); | |
873 } | |
874 | |
875 if (inpidx >= oopoff) { | |
876 // After oopoff, we have derived/base pairs. We must mention all | |
877 // derived pointers here as derived/base pairs for GC. If the | |
878 // derived value is spilling and we have a copy both in Reachblock | |
879 // (called here 'def') and debug_defs[slidx] we need to mention | |
880 // both in derived/base pairs or kill one. | |
881 Node *derived_debug = debug_defs[slidx]; | |
882 if( ((inpidx - oopoff) & 1) == DERIVED && // derived vs base? | |
883 mach && mach->ideal_Opcode() != Op_Halt && | |
884 derived_debug != NULL && | |
885 derived_debug != def ) { // Actual 2nd value appears | |
886 // We have already set 'def' as a derived value. | |
887 // Also set debug_defs[slidx] as a derived value. | |
888 uint k; | |
889 for( k = oopoff; k < cnt; k += 2 ) | |
890 if( n->in(k) == derived_debug ) | |
891 break; // Found an instance of debug derived | |
892 if( k == cnt ) {// No instance of debug_defs[slidx] | |
893 // Add a derived/base pair to cover the debug info. | |
894 // We have to process the added base later since it is not | |
895 // handled yet at this point but skip derived part. | |
896 assert(((n->req() - oopoff) & 1) == DERIVED, | |
897 "must match skip condition above"); | |
898 n->add_req( derived_debug ); // this will be skipped above | |
899 n->add_req( n->in(inpidx+1) ); // this will be processed | |
900 // Increment cnt to handle added input edges on | |
901 // subsequent iterations. | |
902 cnt += 2; | |
903 } | |
904 } | |
905 } | |
906 continue; | |
907 } | |
908 // Special logic for DEBUG info | |
909 if( jvms && b->_freq > BLOCK_FREQUENCY(0.5) ) { | |
910 uint debug_start = jvms->debug_start(); | |
911 // If this is debug info use & there is a reaching DOWN def | |
912 if ((debug_start <= inpidx) && (debug_defs[slidx] != NULL)) { | |
913 assert(inpidx < oopoff, "handle only debug info here"); | |
914 // Just hook it in & move on | |
915 n->set_req(inpidx, debug_defs[slidx]); | |
916 // (Note that this can make two sides of a split live at the | |
917 // same time: The debug def on stack, and another def in a | |
918 // register. The GC needs to know about both of them, but any | |
919 // derived pointers after oopoff will refer to only one of the | |
920 // two defs and the GC would therefore miss the other. Thus | |
921 // this hack is only allowed for debug info which is Java state | |
922 // and therefore never a derived pointer.) | |
923 continue; | |
924 } | |
925 } | |
926 // Grab register mask info | |
927 const RegMask &dmask = def->out_RegMask(); | |
928 const RegMask &umask = n->in_RegMask(inpidx); | |
929 | |
930 assert(inpidx < oopoff, "cannot use-split oop map info"); | |
931 | |
932 bool dup = UPblock[slidx]; | |
933 bool uup = umask.is_UP(); | |
934 | |
935 // Need special logic to handle bound USES. Insert a split at this | |
936 // bound use if we can't rematerialize the def, or if we need the | |
937 // split to form a misaligned pair. | |
938 if( !umask.is_AllStack() && | |
939 (int)umask.Size() <= lrgs(useidx).num_regs() && | |
940 (!def->rematerialize() || | |
941 umask.is_misaligned_Pair())) { | |
942 // These need a Split regardless of overlap or pressure | |
943 // SPLIT - NO DEF - NO CISC SPILL | |
944 maxlrg = split_USE(def,b,n,inpidx,maxlrg,dup,false, splits,slidx); | |
945 // If it wasn't split bail | |
946 if (!maxlrg) { | |
947 return 0; | |
948 } | |
949 insidx++; // Reset iterator to skip USE side split | |
950 continue; | |
951 } | |
952 // Here is the logic chart which describes USE Splitting: | |
953 // 0 = false or DOWN, 1 = true or UP | |
954 // | |
955 // Overlap | DEF | USE | Action | |
956 //------------------------------------------------------- | |
957 // 0 | 0 | 0 | Copy - mem -> mem | |
958 // 0 | 0 | 1 | Split-UP - Check HRP | |
959 // 0 | 1 | 0 | Split-DOWN - Debug Info? | |
960 // 0 | 1 | 1 | Copy - reg -> reg | |
961 // 1 | 0 | 0 | Reset Input Edge (no Split) | |
962 // 1 | 0 | 1 | Split-UP - Check HRP | |
963 // 1 | 1 | 0 | Split-DOWN - Debug Info? | |
964 // 1 | 1 | 1 | Reset Input Edge (no Split) | |
965 // | |
966 // So, if (dup == uup), then overlap test determines action, | |
967 // with true being no split, and false being copy. Else, | |
968 // if DEF is DOWN, Split-UP, and check HRP to decide on | |
969 // resetting DEF. Finally if DEF is UP, Split-DOWN, with | |
970 // special handling for Debug Info. | |
971 if( dup == uup ) { | |
972 if( dmask.overlap(umask) ) { | |
973 // Both are either up or down, and there is overlap, No Split | |
974 n->set_req(inpidx, def); | |
975 } | |
976 else { // Both are either up or down, and there is no overlap | |
977 if( dup ) { // If UP, reg->reg copy | |
978 // COPY ACROSS HERE - NO DEF - NO CISC SPILL | |
979 maxlrg = split_USE(def,b,n,inpidx,maxlrg,false,false, splits,slidx); | |
980 // If it wasn't split bail | |
981 if (!maxlrg) { | |
982 return 0; | |
983 } | |
984 insidx++; // Reset iterator to skip USE side split | |
985 } | |
986 else { // DOWN, mem->mem copy | |
987 // COPY UP & DOWN HERE - NO DEF - NO CISC SPILL | |
988 // First Split-UP to move value into Register | |
989 uint def_ideal = def->ideal_reg(); | |
990 const RegMask* tmp_rm = Matcher::idealreg2regmask[def_ideal]; | |
991 Node *spill = new (C) MachSpillCopyNode(def, dmask, *tmp_rm); | |
992 insert_proj( b, insidx, spill, maxlrg ); | |
993 // Then Split-DOWN as if previous Split was DEF | |
994 maxlrg = split_USE(spill,b,n,inpidx,maxlrg,false,false, splits,slidx); | |
995 // If it wasn't split bail | |
996 if (!maxlrg) { | |
997 return 0; | |
998 } | |
999 insidx += 2; // Reset iterator to skip USE side splits | |
1000 } | |
1001 } // End else no overlap | |
1002 } // End if dup == uup | |
1003 // dup != uup, so check dup for direction of Split | |
1004 else { | |
1005 if( dup ) { // If UP, Split-DOWN and check Debug Info | |
1006 // If this node is already a SpillCopy, just patch the edge | |
1007 // except the case of spilling to stack. | |
1008 if( n->is_SpillCopy() ) { | |
1009 RegMask tmp_rm(umask); | |
1010 tmp_rm.SUBTRACT(Matcher::STACK_ONLY_mask); | |
1011 if( dmask.overlap(tmp_rm) ) { | |
1012 if( def != n->in(inpidx) ) { | |
1013 n->set_req(inpidx, def); | |
1014 } | |
1015 continue; | |
1016 } | |
1017 } | |
1018 // COPY DOWN HERE - NO DEF - NO CISC SPILL | |
1019 maxlrg = split_USE(def,b,n,inpidx,maxlrg,false,false, splits,slidx); | |
1020 // If it wasn't split bail | |
1021 if (!maxlrg) { | |
1022 return 0; | |
1023 } | |
1024 insidx++; // Reset iterator to skip USE side split | |
1025 // Check for debug-info split. Capture it for later | |
1026 // debug splits of the same value | |
1027 if (jvms && jvms->debug_start() <= inpidx && inpidx < oopoff) | |
1028 debug_defs[slidx] = n->in(inpidx); | |
1029 | |
1030 } | |
1031 else { // DOWN, Split-UP and check register pressure | |
1032 if( is_high_pressure( b, &lrgs(useidx), insidx ) ) { | |
1033 // COPY UP HERE - NO DEF - CISC SPILL | |
1034 maxlrg = split_USE(def,b,n,inpidx,maxlrg,true,true, splits,slidx); | |
1035 // If it wasn't split bail | |
1036 if (!maxlrg) { | |
1037 return 0; | |
1038 } | |
1039 insidx++; // Reset iterator to skip USE side split | |
1040 } else { // LRP | |
1041 // COPY UP HERE - WITH DEF - NO CISC SPILL | |
1042 maxlrg = split_USE(def,b,n,inpidx,maxlrg,true,false, splits,slidx); | |
1043 // If it wasn't split bail | |
1044 if (!maxlrg) { | |
1045 return 0; | |
1046 } | |
1047 // Flag this lift-up in a low-pressure block as | |
1048 // already-spilled, so if it spills again it will | |
1049 // spill hard (instead of not spilling hard and | |
1050 // coalescing away). | |
1051 set_was_spilled(n->in(inpidx)); | |
1052 // Since this is a new DEF, update Reachblock & UP | |
1053 Reachblock[slidx] = n->in(inpidx); | |
1054 UPblock[slidx] = true; | |
1055 insidx++; // Reset iterator to skip USE side split | |
1056 } | |
1057 } // End else DOWN | |
1058 } // End dup != uup | |
1059 } // End if Spill USE | |
1060 } // End For All Inputs | |
1061 } // End If not nullcheck | |
1062 | |
1063 // ********** Handle DEFS ********** | |
1064 // DEFS either Split DOWN in HRP regions or when the LRG is bound, or | |
1065 // just reset the Reaches info in LRP regions. DEFS must always update | |
1066 // UP info. | |
1067 if( deflrg.reg() >= LRG::SPILL_REG ) { // Spilled? | |
1068 uint slidx = lrg2reach[defidx]; | |
1069 // Add to defs list for later assignment of new live range number | |
1070 defs->push(n); | |
1071 // Set a flag on the Node indicating it has already spilled. | |
1072 // Only do it for capacity spills not conflict spills. | |
1073 if( !deflrg._direct_conflict ) | |
1074 set_was_spilled(n); | |
1075 assert(!n->is_Phi(),"Cannot insert Phi into DEFS list"); | |
1076 // Grab UP info for DEF | |
1077 const RegMask &dmask = n->out_RegMask(); | |
1078 bool defup = dmask.is_UP(); | |
1079 // Only split at Def if this is a HRP block or bound (and spilled once) | |
1080 if( !n->rematerialize() && | |
1081 (((dmask.is_bound1() || dmask.is_bound2() || dmask.is_misaligned_Pair()) && | |
1082 (deflrg._direct_conflict || deflrg._must_spill)) || | |
1083 // Check for LRG being up in a register and we are inside a high | |
1084 // pressure area. Spill it down immediately. | |
1085 (defup && is_high_pressure(b,&deflrg,insidx))) ) { | |
1086 assert( !n->rematerialize(), "" ); | |
1087 assert( !n->is_SpillCopy(), "" ); | |
1088 // Do a split at the def site. | |
1089 maxlrg = split_DEF( n, b, insidx, maxlrg, Reachblock, debug_defs, splits, slidx ); | |
1090 // If it wasn't split bail | |
1091 if (!maxlrg) { | |
1092 return 0; | |
1093 } | |
1094 // Split DEF's Down | |
1095 UPblock[slidx] = 0; | |
1096 #ifndef PRODUCT | |
1097 // DEBUG | |
1098 if( trace_spilling() ) { | |
1099 tty->print("\nNew Split DOWN DEF of Spill Idx "); | |
1100 tty->print("%d, UP %d:\n",slidx,false); | |
1101 n->dump(); | |
1102 } | |
1103 #endif | |
1104 } | |
1105 else { // Neither bound nor HRP, must be LRP | |
1106 // otherwise, just record the def | |
1107 Reachblock[slidx] = n; | |
1108 // UP should come from the outRegmask() of the DEF | |
1109 UPblock[slidx] = defup; | |
1110 // Update debug list of reaching down definitions, kill if DEF is UP | |
1111 debug_defs[slidx] = defup ? NULL : n; | |
1112 #ifndef PRODUCT | |
1113 // DEBUG | |
1114 if( trace_spilling() ) { | |
1115 tty->print("\nNew DEF of Spill Idx "); | |
1116 tty->print("%d, UP %d:\n",slidx,defup); | |
1117 n->dump(); | |
1118 } | |
1119 #endif | |
1120 } // End else LRP | |
1121 } // End if spill def | |
1122 | |
1123 // ********** Split Left Over Mem-Mem Moves ********** | |
1124 // Check for mem-mem copies and split them now. Do not do this | |
1125 // to copies about to be spilled; they will be Split shortly. | |
1126 if( copyidx ) { | |
1127 Node *use = n->in(copyidx); | |
1128 uint useidx = Find_id(use); | |
1129 if( useidx < _maxlrg && // This is not a new split | |
1130 OptoReg::is_stack(deflrg.reg()) && | |
1131 deflrg.reg() < LRG::SPILL_REG ) { // And DEF is from stack | |
1132 LRG &uselrg = lrgs(useidx); | |
1133 if( OptoReg::is_stack(uselrg.reg()) && | |
1134 uselrg.reg() < LRG::SPILL_REG && // USE is from stack | |
1135 deflrg.reg() != uselrg.reg() ) { // Not trivially removed | |
1136 uint def_ideal_reg = Matcher::base2reg[n->bottom_type()->base()]; | |
1137 const RegMask &def_rm = *Matcher::idealreg2regmask[def_ideal_reg]; | |
1138 const RegMask &use_rm = n->in_RegMask(copyidx); | |
1139 if( def_rm.overlap(use_rm) && n->is_SpillCopy() ) { // Bug 4707800, 'n' may be a storeSSL | |
1140 if (C->check_node_count(NodeLimitFudgeFactor, out_of_nodes)) { // Check when generating nodes | |
1141 return 0; | |
1142 } | |
1143 Node *spill = new (C) MachSpillCopyNode(use,use_rm,def_rm); | |
1144 n->set_req(copyidx,spill); | |
1145 n->as_MachSpillCopy()->set_in_RegMask(def_rm); | |
1146 // Put the spill just before the copy | |
1147 insert_proj( b, insidx++, spill, maxlrg++ ); | |
1148 } | |
1149 } | |
1150 } | |
1151 } | |
1152 } // End For All Instructions in Block - Non-PHI Pass | |
1153 | |
1154 // Check if each LRG is live out of this block so as not to propagate | |
1155 // beyond the last use of a LRG. | |
1156 for( slidx = 0; slidx < spill_cnt; slidx++ ) { | |
1157 uint defidx = lidxs.at(slidx); | |
1158 IndexSet *liveout = _live->live(b); | |
1159 if( !liveout->member(defidx) ) { | |
1160 #ifdef ASSERT | |
1161 // The index defidx is not live. Check the liveout array to ensure that | |
1162 // it contains no members which compress to defidx. Finding such an | |
1163 // instance may be a case to add liveout adjustment in compress_uf_map(). | |
1164 // See 5063219. | |
1165 uint member; | |
1166 IndexSetIterator isi(liveout); | |
1167 while ((member = isi.next()) != 0) { | |
1168 assert(defidx != Find_const(member), "Live out member has not been compressed"); | |
1169 } | |
1170 #endif | |
1171 Reachblock[slidx] = NULL; | |
1172 } else { | |
1173 assert(Reachblock[slidx] != NULL,"No reaching definition for liveout value"); | |
1174 } | |
1175 } | |
1176 #ifndef PRODUCT | |
1177 if( trace_spilling() ) | |
1178 b->dump(); | |
1179 #endif | |
1180 } // End For All Blocks | |
1181 | |
1182 //----------PASS 2---------- | |
1183 // Reset all DEF live range numbers here | |
1184 for( insidx = 0; insidx < defs->size(); insidx++ ) { | |
1185 // Grab the def | |
1186 n1 = defs->at(insidx); | |
1187 // Set new lidx for DEF | |
1188 new_lrg(n1, maxlrg++); | |
1189 } | |
1190 //----------Phi Node Splitting---------- | |
1191 // Clean up a phi here, and assign a new live range number | |
1192 // Cycle through this block's predecessors, collecting Reaches | |
1193 // info for each spilled LRG and update edges. | |
1194 // Walk the phis list to patch inputs, split phis, and name phis | |
1195 for( insidx = 0; insidx < phis->size(); insidx++ ) { | |
1196 Node *phi = phis->at(insidx); | |
1197 assert(phi->is_Phi(),"This list must only contain Phi Nodes"); | |
1198 Block *b = _cfg._bbs[phi->_idx]; | |
1199 // Grab the live range number | |
1200 uint lidx = Find_id(phi); | |
1201 uint slidx = lrg2reach[lidx]; | |
1202 // Update node to lidx map | |
1203 new_lrg(phi, maxlrg++); | |
1204 // Get PASS1's up/down decision for the block. | |
1205 int phi_up = !!UP_entry[slidx]->test(b->_pre_order); | |
1206 | |
1207 // Force down if double-spilling live range | |
1208 if( lrgs(lidx)._was_spilled1 ) | |
1209 phi_up = false; | |
1210 | |
1211 // When splitting a Phi we an split it normal or "inverted". | |
1212 // An inverted split makes the splits target the Phi's UP/DOWN | |
1213 // sense inverted; then the Phi is followed by a final def-side | |
1214 // split to invert back. It changes which blocks the spill code | |
1215 // goes in. | |
1216 | |
1217 // Walk the predecessor blocks and assign the reaching def to the Phi. | |
1218 // Split Phi nodes by placing USE side splits wherever the reaching | |
1219 // DEF has the wrong UP/DOWN value. | |
1220 for( uint i = 1; i < b->num_preds(); i++ ) { | |
1221 // Get predecessor block pre-order number | |
1222 Block *pred = _cfg._bbs[b->pred(i)->_idx]; | |
1223 pidx = pred->_pre_order; | |
1224 // Grab reaching def | |
1225 Node *def = Reaches[pidx][slidx]; | |
1226 assert( def, "must have reaching def" ); | |
1227 // If input up/down sense and reg-pressure DISagree | |
1228 if( def->rematerialize() ) { | |
1229 def = split_Rematerialize( def, pred, pred->end_idx(), maxlrg, splits, slidx, lrg2reach, Reachblock, false ); | |
1230 if( !def ) return 0; // Bail out | |
1231 } | |
1232 // Update the Phi's input edge array | |
1233 phi->set_req(i,def); | |
1234 // Grab the UP/DOWN sense for the input | |
1235 u1 = UP[pidx][slidx]; | |
1236 if( u1 != (phi_up != 0)) { | |
1237 maxlrg = split_USE(def, b, phi, i, maxlrg, !u1, false, splits,slidx); | |
1238 // If it wasn't split bail | |
1239 if (!maxlrg) { | |
1240 return 0; | |
1241 } | |
1242 } | |
1243 } // End for all inputs to the Phi | |
1244 } // End for all Phi Nodes | |
1245 // Update _maxlrg to save Union asserts | |
1246 _maxlrg = maxlrg; | |
1247 | |
1248 | |
1249 //----------PASS 3---------- | |
1250 // Pass over all Phi's to union the live ranges | |
1251 for( insidx = 0; insidx < phis->size(); insidx++ ) { | |
1252 Node *phi = phis->at(insidx); | |
1253 assert(phi->is_Phi(),"This list must only contain Phi Nodes"); | |
1254 // Walk all inputs to Phi and Union input live range with Phi live range | |
1255 for( uint i = 1; i < phi->req(); i++ ) { | |
1256 // Grab the input node | |
1257 Node *n = phi->in(i); | |
1258 assert( n, "" ); | |
1259 uint lidx = Find(n); | |
1260 uint pidx = Find(phi); | |
1261 if( lidx < pidx ) | |
1262 Union(n, phi); | |
1263 else if( lidx > pidx ) | |
1264 Union(phi, n); | |
1265 } // End for all inputs to the Phi Node | |
1266 } // End for all Phi Nodes | |
1267 // Now union all two address instructions | |
1268 for( insidx = 0; insidx < defs->size(); insidx++ ) { | |
1269 // Grab the def | |
1270 n1 = defs->at(insidx); | |
1271 // Set new lidx for DEF & handle 2-addr instructions | |
1272 if( n1->is_Mach() && ((twoidx = n1->as_Mach()->two_adr()) != 0) ) { | |
1273 assert( Find(n1->in(twoidx)) < maxlrg,"Assigning bad live range index"); | |
1274 // Union the input and output live ranges | |
1275 uint lr1 = Find(n1); | |
1276 uint lr2 = Find(n1->in(twoidx)); | |
1277 if( lr1 < lr2 ) | |
1278 Union(n1, n1->in(twoidx)); | |
1279 else if( lr1 > lr2 ) | |
1280 Union(n1->in(twoidx), n1); | |
1281 } // End if two address | |
1282 } // End for all defs | |
1283 // DEBUG | |
1284 #ifdef ASSERT | |
1285 // Validate all live range index assignments | |
1286 for( bidx = 0; bidx < _cfg._num_blocks; bidx++ ) { | |
1287 b = _cfg._blocks[bidx]; | |
1288 for( insidx = 0; insidx <= b->end_idx(); insidx++ ) { | |
1289 Node *n = b->_nodes[insidx]; | |
1290 uint defidx = Find(n); | |
1291 assert(defidx < _maxlrg,"Bad live range index in Split"); | |
1292 assert(defidx < maxlrg,"Bad live range index in Split"); | |
1293 } | |
1294 } | |
1295 // Issue a warning if splitting made no progress | |
1296 int noprogress = 0; | |
1297 for( slidx = 0; slidx < spill_cnt; slidx++ ) { | |
1298 if( PrintOpto && WizardMode && splits.at(slidx) == 0 ) { | |
1299 tty->print_cr("Failed to split live range %d", lidxs.at(slidx)); | |
1300 //BREAKPOINT; | |
1301 } | |
1302 else { | |
1303 noprogress++; | |
1304 } | |
1305 } | |
1306 if(!noprogress) { | |
1307 tty->print_cr("Failed to make progress in Split"); | |
1308 //BREAKPOINT; | |
1309 } | |
1310 #endif | |
1311 // Return updated count of live ranges | |
1312 return maxlrg; | |
1313 } |