Mercurial > hg > graal-compiler
annotate src/cpu/x86/vm/assembler_x86.hpp @ 420:a1980da045cc
6462850: generate biased locking code in C2 ideal graph
Summary: Inline biased locking code in C2 ideal graph during macro nodes expansion
Reviewed-by: never
author | kvn |
---|---|
date | Fri, 07 Nov 2008 09:29:38 -0800 |
parents | 2649e5276dd7 |
children | 56aae7be60d4 |
rev | line source |
---|---|
0 | 1 /* |
196 | 2 * Copyright 1997-2008 Sun Microsystems, Inc. All Rights Reserved. |
0 | 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
4 * | |
5 * This code is free software; you can redistribute it and/or modify it | |
6 * under the terms of the GNU General Public License version 2 only, as | |
7 * published by the Free Software Foundation. | |
8 * | |
9 * This code is distributed in the hope that it will be useful, but WITHOUT | |
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 * version 2 for more details (a copy is included in the LICENSE file that | |
13 * accompanied this code). | |
14 * | |
15 * You should have received a copy of the GNU General Public License version | |
16 * 2 along with this work; if not, write to the Free Software Foundation, | |
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
18 * | |
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, | |
20 * CA 95054 USA or visit www.sun.com if you need additional information or | |
21 * have any questions. | |
22 * | |
23 */ | |
24 | |
25 class BiasedLockingCounters; | |
26 | |
27 // Contains all the definitions needed for x86 assembly code generation. | |
28 | |
29 // Calling convention | |
30 class Argument VALUE_OBJ_CLASS_SPEC { | |
31 public: | |
32 enum { | |
33 #ifdef _LP64 | |
34 #ifdef _WIN64 | |
35 n_int_register_parameters_c = 4, // rcx, rdx, r8, r9 (c_rarg0, c_rarg1, ...) | |
36 n_float_register_parameters_c = 4, // xmm0 - xmm3 (c_farg0, c_farg1, ... ) | |
37 #else | |
38 n_int_register_parameters_c = 6, // rdi, rsi, rdx, rcx, r8, r9 (c_rarg0, c_rarg1, ...) | |
39 n_float_register_parameters_c = 8, // xmm0 - xmm7 (c_farg0, c_farg1, ... ) | |
40 #endif // _WIN64 | |
41 n_int_register_parameters_j = 6, // j_rarg0, j_rarg1, ... | |
42 n_float_register_parameters_j = 8 // j_farg0, j_farg1, ... | |
43 #else | |
44 n_register_parameters = 0 // 0 registers used to pass arguments | |
45 #endif // _LP64 | |
46 }; | |
47 }; | |
48 | |
49 | |
50 #ifdef _LP64 | |
51 // Symbolically name the register arguments used by the c calling convention. | |
52 // Windows is different from linux/solaris. So much for standards... | |
53 | |
54 #ifdef _WIN64 | |
55 | |
56 REGISTER_DECLARATION(Register, c_rarg0, rcx); | |
57 REGISTER_DECLARATION(Register, c_rarg1, rdx); | |
58 REGISTER_DECLARATION(Register, c_rarg2, r8); | |
59 REGISTER_DECLARATION(Register, c_rarg3, r9); | |
60 | |
304 | 61 REGISTER_DECLARATION(XMMRegister, c_farg0, xmm0); |
62 REGISTER_DECLARATION(XMMRegister, c_farg1, xmm1); | |
63 REGISTER_DECLARATION(XMMRegister, c_farg2, xmm2); | |
64 REGISTER_DECLARATION(XMMRegister, c_farg3, xmm3); | |
0 | 65 |
66 #else | |
67 | |
68 REGISTER_DECLARATION(Register, c_rarg0, rdi); | |
69 REGISTER_DECLARATION(Register, c_rarg1, rsi); | |
70 REGISTER_DECLARATION(Register, c_rarg2, rdx); | |
71 REGISTER_DECLARATION(Register, c_rarg3, rcx); | |
72 REGISTER_DECLARATION(Register, c_rarg4, r8); | |
73 REGISTER_DECLARATION(Register, c_rarg5, r9); | |
74 | |
304 | 75 REGISTER_DECLARATION(XMMRegister, c_farg0, xmm0); |
76 REGISTER_DECLARATION(XMMRegister, c_farg1, xmm1); | |
77 REGISTER_DECLARATION(XMMRegister, c_farg2, xmm2); | |
78 REGISTER_DECLARATION(XMMRegister, c_farg3, xmm3); | |
79 REGISTER_DECLARATION(XMMRegister, c_farg4, xmm4); | |
80 REGISTER_DECLARATION(XMMRegister, c_farg5, xmm5); | |
81 REGISTER_DECLARATION(XMMRegister, c_farg6, xmm6); | |
82 REGISTER_DECLARATION(XMMRegister, c_farg7, xmm7); | |
0 | 83 |
84 #endif // _WIN64 | |
85 | |
86 // Symbolically name the register arguments used by the Java calling convention. | |
87 // We have control over the convention for java so we can do what we please. | |
88 // What pleases us is to offset the java calling convention so that when | |
89 // we call a suitable jni method the arguments are lined up and we don't | |
90 // have to do little shuffling. A suitable jni method is non-static and a | |
91 // small number of arguments (two fewer args on windows) | |
92 // | |
93 // |-------------------------------------------------------| | |
94 // | c_rarg0 c_rarg1 c_rarg2 c_rarg3 c_rarg4 c_rarg5 | | |
95 // |-------------------------------------------------------| | |
96 // | rcx rdx r8 r9 rdi* rsi* | windows (* not a c_rarg) | |
97 // | rdi rsi rdx rcx r8 r9 | solaris/linux | |
98 // |-------------------------------------------------------| | |
99 // | j_rarg5 j_rarg0 j_rarg1 j_rarg2 j_rarg3 j_rarg4 | | |
100 // |-------------------------------------------------------| | |
101 | |
102 REGISTER_DECLARATION(Register, j_rarg0, c_rarg1); | |
103 REGISTER_DECLARATION(Register, j_rarg1, c_rarg2); | |
104 REGISTER_DECLARATION(Register, j_rarg2, c_rarg3); | |
105 // Windows runs out of register args here | |
106 #ifdef _WIN64 | |
107 REGISTER_DECLARATION(Register, j_rarg3, rdi); | |
108 REGISTER_DECLARATION(Register, j_rarg4, rsi); | |
109 #else | |
110 REGISTER_DECLARATION(Register, j_rarg3, c_rarg4); | |
111 REGISTER_DECLARATION(Register, j_rarg4, c_rarg5); | |
112 #endif /* _WIN64 */ | |
113 REGISTER_DECLARATION(Register, j_rarg5, c_rarg0); | |
114 | |
304 | 115 REGISTER_DECLARATION(XMMRegister, j_farg0, xmm0); |
116 REGISTER_DECLARATION(XMMRegister, j_farg1, xmm1); | |
117 REGISTER_DECLARATION(XMMRegister, j_farg2, xmm2); | |
118 REGISTER_DECLARATION(XMMRegister, j_farg3, xmm3); | |
119 REGISTER_DECLARATION(XMMRegister, j_farg4, xmm4); | |
120 REGISTER_DECLARATION(XMMRegister, j_farg5, xmm5); | |
121 REGISTER_DECLARATION(XMMRegister, j_farg6, xmm6); | |
122 REGISTER_DECLARATION(XMMRegister, j_farg7, xmm7); | |
0 | 123 |
124 REGISTER_DECLARATION(Register, rscratch1, r10); // volatile | |
125 REGISTER_DECLARATION(Register, rscratch2, r11); // volatile | |
126 | |
304 | 127 REGISTER_DECLARATION(Register, r12_heapbase, r12); // callee-saved |
0 | 128 REGISTER_DECLARATION(Register, r15_thread, r15); // callee-saved |
129 | |
304 | 130 #else |
131 // rscratch1 will apear in 32bit code that is dead but of course must compile | |
132 // Using noreg ensures if the dead code is incorrectly live and executed it | |
133 // will cause an assertion failure | |
134 #define rscratch1 noreg | |
135 | |
0 | 136 #endif // _LP64 |
137 | |
138 // Address is an abstraction used to represent a memory location | |
139 // using any of the amd64 addressing modes with one object. | |
140 // | |
141 // Note: A register location is represented via a Register, not | |
142 // via an address for efficiency & simplicity reasons. | |
143 | |
144 class ArrayAddress; | |
145 | |
146 class Address VALUE_OBJ_CLASS_SPEC { | |
147 public: | |
148 enum ScaleFactor { | |
149 no_scale = -1, | |
150 times_1 = 0, | |
151 times_2 = 1, | |
152 times_4 = 2, | |
304 | 153 times_8 = 3, |
154 times_ptr = LP64_ONLY(times_8) NOT_LP64(times_4) | |
0 | 155 }; |
156 | |
157 private: | |
158 Register _base; | |
159 Register _index; | |
160 ScaleFactor _scale; | |
161 int _disp; | |
162 RelocationHolder _rspec; | |
163 | |
304 | 164 // Easily misused constructors make them private |
165 // %%% can we make these go away? | |
166 NOT_LP64(Address(address loc, RelocationHolder spec);) | |
167 Address(int disp, address loc, relocInfo::relocType rtype); | |
168 Address(int disp, address loc, RelocationHolder spec); | |
0 | 169 |
170 public: | |
304 | 171 |
172 int disp() { return _disp; } | |
0 | 173 // creation |
174 Address() | |
175 : _base(noreg), | |
176 _index(noreg), | |
177 _scale(no_scale), | |
178 _disp(0) { | |
179 } | |
180 | |
181 // No default displacement otherwise Register can be implicitly | |
182 // converted to 0(Register) which is quite a different animal. | |
183 | |
184 Address(Register base, int disp) | |
185 : _base(base), | |
186 _index(noreg), | |
187 _scale(no_scale), | |
188 _disp(disp) { | |
189 } | |
190 | |
191 Address(Register base, Register index, ScaleFactor scale, int disp = 0) | |
192 : _base (base), | |
193 _index(index), | |
194 _scale(scale), | |
195 _disp (disp) { | |
196 assert(!index->is_valid() == (scale == Address::no_scale), | |
197 "inconsistent address"); | |
198 } | |
199 | |
200 // The following two overloads are used in connection with the | |
201 // ByteSize type (see sizes.hpp). They simplify the use of | |
202 // ByteSize'd arguments in assembly code. Note that their equivalent | |
203 // for the optimized build are the member functions with int disp | |
204 // argument since ByteSize is mapped to an int type in that case. | |
205 // | |
206 // Note: DO NOT introduce similar overloaded functions for WordSize | |
207 // arguments as in the optimized mode, both ByteSize and WordSize | |
208 // are mapped to the same type and thus the compiler cannot make a | |
209 // distinction anymore (=> compiler errors). | |
210 | |
211 #ifdef ASSERT | |
212 Address(Register base, ByteSize disp) | |
213 : _base(base), | |
214 _index(noreg), | |
215 _scale(no_scale), | |
216 _disp(in_bytes(disp)) { | |
217 } | |
218 | |
219 Address(Register base, Register index, ScaleFactor scale, ByteSize disp) | |
220 : _base(base), | |
221 _index(index), | |
222 _scale(scale), | |
223 _disp(in_bytes(disp)) { | |
224 assert(!index->is_valid() == (scale == Address::no_scale), | |
225 "inconsistent address"); | |
226 } | |
227 #endif // ASSERT | |
228 | |
229 // accessors | |
342
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
230 bool uses(Register reg) const { return _base == reg || _index == reg; } |
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
231 Register base() const { return _base; } |
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
232 Register index() const { return _index; } |
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
233 ScaleFactor scale() const { return _scale; } |
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
234 int disp() const { return _disp; } |
0 | 235 |
236 // Convert the raw encoding form into the form expected by the constructor for | |
237 // Address. An index of 4 (rsp) corresponds to having no index, so convert | |
238 // that to noreg for the Address constructor. | |
239 static Address make_raw(int base, int index, int scale, int disp); | |
240 | |
241 static Address make_array(ArrayAddress); | |
242 | |
243 | |
244 private: | |
245 bool base_needs_rex() const { | |
246 return _base != noreg && _base->encoding() >= 8; | |
247 } | |
248 | |
249 bool index_needs_rex() const { | |
250 return _index != noreg &&_index->encoding() >= 8; | |
251 } | |
252 | |
253 relocInfo::relocType reloc() const { return _rspec.type(); } | |
254 | |
255 friend class Assembler; | |
256 friend class MacroAssembler; | |
257 friend class LIR_Assembler; // base/index/scale/disp | |
258 }; | |
259 | |
260 // | |
261 // AddressLiteral has been split out from Address because operands of this type | |
262 // need to be treated specially on 32bit vs. 64bit platforms. By splitting it out | |
263 // the few instructions that need to deal with address literals are unique and the | |
264 // MacroAssembler does not have to implement every instruction in the Assembler | |
265 // in order to search for address literals that may need special handling depending | |
266 // on the instruction and the platform. As small step on the way to merging i486/amd64 | |
267 // directories. | |
268 // | |
269 class AddressLiteral VALUE_OBJ_CLASS_SPEC { | |
270 friend class ArrayAddress; | |
271 RelocationHolder _rspec; | |
272 // Typically we use AddressLiterals we want to use their rval | |
273 // However in some situations we want the lval (effect address) of the item. | |
274 // We provide a special factory for making those lvals. | |
275 bool _is_lval; | |
276 | |
277 // If the target is far we'll need to load the ea of this to | |
278 // a register to reach it. Otherwise if near we can do rip | |
279 // relative addressing. | |
280 | |
281 address _target; | |
282 | |
283 protected: | |
284 // creation | |
285 AddressLiteral() | |
286 : _is_lval(false), | |
287 _target(NULL) | |
288 {} | |
289 | |
290 public: | |
291 | |
292 | |
293 AddressLiteral(address target, relocInfo::relocType rtype); | |
294 | |
295 AddressLiteral(address target, RelocationHolder const& rspec) | |
296 : _rspec(rspec), | |
297 _is_lval(false), | |
298 _target(target) | |
299 {} | |
300 | |
301 AddressLiteral addr() { | |
302 AddressLiteral ret = *this; | |
303 ret._is_lval = true; | |
304 return ret; | |
305 } | |
306 | |
307 | |
308 private: | |
309 | |
310 address target() { return _target; } | |
311 bool is_lval() { return _is_lval; } | |
312 | |
313 relocInfo::relocType reloc() const { return _rspec.type(); } | |
314 const RelocationHolder& rspec() const { return _rspec; } | |
315 | |
316 friend class Assembler; | |
317 friend class MacroAssembler; | |
318 friend class Address; | |
319 friend class LIR_Assembler; | |
320 }; | |
321 | |
322 // Convience classes | |
323 class RuntimeAddress: public AddressLiteral { | |
324 | |
325 public: | |
326 | |
327 RuntimeAddress(address target) : AddressLiteral(target, relocInfo::runtime_call_type) {} | |
328 | |
329 }; | |
330 | |
331 class OopAddress: public AddressLiteral { | |
332 | |
333 public: | |
334 | |
335 OopAddress(address target) : AddressLiteral(target, relocInfo::oop_type){} | |
336 | |
337 }; | |
338 | |
339 class ExternalAddress: public AddressLiteral { | |
340 | |
341 public: | |
342 | |
343 ExternalAddress(address target) : AddressLiteral(target, relocInfo::external_word_type){} | |
344 | |
345 }; | |
346 | |
347 class InternalAddress: public AddressLiteral { | |
348 | |
349 public: | |
350 | |
351 InternalAddress(address target) : AddressLiteral(target, relocInfo::internal_word_type) {} | |
352 | |
353 }; | |
354 | |
355 // x86 can do array addressing as a single operation since disp can be an absolute | |
356 // address amd64 can't. We create a class that expresses the concept but does extra | |
357 // magic on amd64 to get the final result | |
358 | |
359 class ArrayAddress VALUE_OBJ_CLASS_SPEC { | |
360 private: | |
361 | |
362 AddressLiteral _base; | |
363 Address _index; | |
364 | |
365 public: | |
366 | |
367 ArrayAddress() {}; | |
368 ArrayAddress(AddressLiteral base, Address index): _base(base), _index(index) {}; | |
369 AddressLiteral base() { return _base; } | |
370 Address index() { return _index; } | |
371 | |
372 }; | |
373 | |
304 | 374 const int FPUStateSizeInWords = NOT_LP64(27) LP64_ONLY( 512 / wordSize); |
0 | 375 |
376 // The Intel x86/Amd64 Assembler: Pure assembler doing NO optimizations on the instruction | |
377 // level (e.g. mov rax, 0 is not translated into xor rax, rax!); i.e., what you write | |
378 // is what you get. The Assembler is generating code into a CodeBuffer. | |
379 | |
380 class Assembler : public AbstractAssembler { | |
381 friend class AbstractAssembler; // for the non-virtual hack | |
382 friend class LIR_Assembler; // as_Address() | |
304 | 383 friend class StubGenerator; |
0 | 384 |
385 public: | |
386 enum Condition { // The x86 condition codes used for conditional jumps/moves. | |
387 zero = 0x4, | |
388 notZero = 0x5, | |
389 equal = 0x4, | |
390 notEqual = 0x5, | |
391 less = 0xc, | |
392 lessEqual = 0xe, | |
393 greater = 0xf, | |
394 greaterEqual = 0xd, | |
395 below = 0x2, | |
396 belowEqual = 0x6, | |
397 above = 0x7, | |
398 aboveEqual = 0x3, | |
399 overflow = 0x0, | |
400 noOverflow = 0x1, | |
401 carrySet = 0x2, | |
402 carryClear = 0x3, | |
403 negative = 0x8, | |
404 positive = 0x9, | |
405 parity = 0xa, | |
406 noParity = 0xb | |
407 }; | |
408 | |
409 enum Prefix { | |
410 // segment overrides | |
411 CS_segment = 0x2e, | |
412 SS_segment = 0x36, | |
413 DS_segment = 0x3e, | |
414 ES_segment = 0x26, | |
415 FS_segment = 0x64, | |
416 GS_segment = 0x65, | |
417 | |
418 REX = 0x40, | |
419 | |
420 REX_B = 0x41, | |
421 REX_X = 0x42, | |
422 REX_XB = 0x43, | |
423 REX_R = 0x44, | |
424 REX_RB = 0x45, | |
425 REX_RX = 0x46, | |
426 REX_RXB = 0x47, | |
427 | |
428 REX_W = 0x48, | |
429 | |
430 REX_WB = 0x49, | |
431 REX_WX = 0x4A, | |
432 REX_WXB = 0x4B, | |
433 REX_WR = 0x4C, | |
434 REX_WRB = 0x4D, | |
435 REX_WRX = 0x4E, | |
436 REX_WRXB = 0x4F | |
437 }; | |
438 | |
439 enum WhichOperand { | |
440 // input to locate_operand, and format code for relocations | |
304 | 441 imm_operand = 0, // embedded 32-bit|64-bit immediate operand |
0 | 442 disp32_operand = 1, // embedded 32-bit displacement or address |
443 call32_operand = 2, // embedded 32-bit self-relative displacement | |
304 | 444 #ifndef _LP64 |
0 | 445 _WhichOperand_limit = 3 |
304 | 446 #else |
447 narrow_oop_operand = 3, // embedded 32-bit immediate narrow oop | |
448 _WhichOperand_limit = 4 | |
449 #endif | |
0 | 450 }; |
451 | |
304 | 452 |
453 | |
454 // NOTE: The general philopsophy of the declarations here is that 64bit versions | |
455 // of instructions are freely declared without the need for wrapping them an ifdef. | |
456 // (Some dangerous instructions are ifdef's out of inappropriate jvm's.) | |
457 // In the .cpp file the implementations are wrapped so that they are dropped out | |
458 // of the resulting jvm. This is done mostly to keep the footprint of KERNEL | |
459 // to the size it was prior to merging up the 32bit and 64bit assemblers. | |
460 // | |
461 // This does mean you'll get a linker/runtime error if you use a 64bit only instruction | |
462 // in a 32bit vm. This is somewhat unfortunate but keeps the ifdef noise down. | |
463 | |
464 private: | |
465 | |
466 | |
467 // 64bit prefixes | |
468 int prefix_and_encode(int reg_enc, bool byteinst = false); | |
469 int prefixq_and_encode(int reg_enc); | |
470 | |
471 int prefix_and_encode(int dst_enc, int src_enc, bool byteinst = false); | |
472 int prefixq_and_encode(int dst_enc, int src_enc); | |
473 | |
474 void prefix(Register reg); | |
475 void prefix(Address adr); | |
476 void prefixq(Address adr); | |
477 | |
478 void prefix(Address adr, Register reg, bool byteinst = false); | |
479 void prefixq(Address adr, Register reg); | |
480 | |
481 void prefix(Address adr, XMMRegister reg); | |
482 | |
483 void prefetch_prefix(Address src); | |
484 | |
485 // Helper functions for groups of instructions | |
486 void emit_arith_b(int op1, int op2, Register dst, int imm8); | |
487 | |
488 void emit_arith(int op1, int op2, Register dst, int32_t imm32); | |
489 // only 32bit?? | |
490 void emit_arith(int op1, int op2, Register dst, jobject obj); | |
491 void emit_arith(int op1, int op2, Register dst, Register src); | |
492 | |
493 void emit_operand(Register reg, | |
494 Register base, Register index, Address::ScaleFactor scale, | |
495 int disp, | |
496 RelocationHolder const& rspec, | |
497 int rip_relative_correction = 0); | |
498 | |
499 void emit_operand(Register reg, Address adr, int rip_relative_correction = 0); | |
500 | |
501 // operands that only take the original 32bit registers | |
502 void emit_operand32(Register reg, Address adr); | |
503 | |
504 void emit_operand(XMMRegister reg, | |
505 Register base, Register index, Address::ScaleFactor scale, | |
506 int disp, | |
507 RelocationHolder const& rspec); | |
508 | |
509 void emit_operand(XMMRegister reg, Address adr); | |
510 | |
511 void emit_operand(MMXRegister reg, Address adr); | |
512 | |
513 // workaround gcc (3.2.1-7) bug | |
514 void emit_operand(Address adr, MMXRegister reg); | |
515 | |
516 | |
517 // Immediate-to-memory forms | |
518 void emit_arith_operand(int op1, Register rm, Address adr, int32_t imm32); | |
519 | |
520 void emit_farith(int b1, int b2, int i); | |
521 | |
522 | |
523 protected: | |
524 #ifdef ASSERT | |
525 void check_relocation(RelocationHolder const& rspec, int format); | |
526 #endif | |
527 | |
528 inline void emit_long64(jlong x); | |
529 | |
530 void emit_data(jint data, relocInfo::relocType rtype, int format); | |
531 void emit_data(jint data, RelocationHolder const& rspec, int format); | |
532 void emit_data64(jlong data, relocInfo::relocType rtype, int format = 0); | |
533 void emit_data64(jlong data, RelocationHolder const& rspec, int format = 0); | |
534 | |
535 | |
536 bool reachable(AddressLiteral adr) NOT_LP64({ return true;}); | |
537 | |
538 // These are all easily abused and hence protected | |
539 | |
540 void mov_literal32(Register dst, int32_t imm32, RelocationHolder const& rspec, int format = 0); | |
541 | |
542 // 32BIT ONLY SECTION | |
543 #ifndef _LP64 | |
544 // Make these disappear in 64bit mode since they would never be correct | |
545 void cmp_literal32(Register src1, int32_t imm32, RelocationHolder const& rspec); // 32BIT ONLY | |
546 void cmp_literal32(Address src1, int32_t imm32, RelocationHolder const& rspec); // 32BIT ONLY | |
547 | |
548 void mov_literal32(Address dst, int32_t imm32, RelocationHolder const& rspec); // 32BIT ONLY | |
549 | |
550 void push_literal32(int32_t imm32, RelocationHolder const& rspec); // 32BIT ONLY | |
551 #else | |
552 // 64BIT ONLY SECTION | |
553 void mov_literal64(Register dst, intptr_t imm64, RelocationHolder const& rspec); // 64BIT ONLY | |
554 #endif // _LP64 | |
555 | |
556 // These are unique in that we are ensured by the caller that the 32bit | |
557 // relative in these instructions will always be able to reach the potentially | |
558 // 64bit address described by entry. Since they can take a 64bit address they | |
559 // don't have the 32 suffix like the other instructions in this class. | |
560 | |
561 void call_literal(address entry, RelocationHolder const& rspec); | |
562 void jmp_literal(address entry, RelocationHolder const& rspec); | |
563 | |
564 // Avoid using directly section | |
565 // Instructions in this section are actually usable by anyone without danger | |
566 // of failure but have performance issues that are addressed my enhanced | |
567 // instructions which will do the proper thing base on the particular cpu. | |
568 // We protect them because we don't trust you... | |
569 | |
570 // Don't use next inc() and dec() methods directly. INC & DEC instructions | |
571 // could cause a partial flag stall since they don't set CF flag. | |
572 // Use MacroAssembler::decrement() & MacroAssembler::increment() methods | |
573 // which call inc() & dec() or add() & sub() in accordance with | |
574 // the product flag UseIncDec value. | |
575 | |
576 void decl(Register dst); | |
577 void decl(Address dst); | |
578 void decq(Register dst); | |
579 void decq(Address dst); | |
580 | |
581 void incl(Register dst); | |
582 void incl(Address dst); | |
583 void incq(Register dst); | |
584 void incq(Address dst); | |
585 | |
586 // New cpus require use of movsd and movss to avoid partial register stall | |
587 // when loading from memory. But for old Opteron use movlpd instead of movsd. | |
588 // The selection is done in MacroAssembler::movdbl() and movflt(). | |
589 | |
590 // Move Scalar Single-Precision Floating-Point Values | |
591 void movss(XMMRegister dst, Address src); | |
592 void movss(XMMRegister dst, XMMRegister src); | |
593 void movss(Address dst, XMMRegister src); | |
594 | |
595 // Move Scalar Double-Precision Floating-Point Values | |
596 void movsd(XMMRegister dst, Address src); | |
597 void movsd(XMMRegister dst, XMMRegister src); | |
598 void movsd(Address dst, XMMRegister src); | |
599 void movlpd(XMMRegister dst, Address src); | |
600 | |
601 // New cpus require use of movaps and movapd to avoid partial register stall | |
602 // when moving between registers. | |
603 void movaps(XMMRegister dst, XMMRegister src); | |
604 void movapd(XMMRegister dst, XMMRegister src); | |
605 | |
606 // End avoid using directly | |
607 | |
608 | |
609 // Instruction prefixes | |
610 void prefix(Prefix p); | |
611 | |
0 | 612 public: |
613 | |
614 // Creation | |
615 Assembler(CodeBuffer* code) : AbstractAssembler(code) {} | |
616 | |
617 // Decoding | |
618 static address locate_operand(address inst, WhichOperand which); | |
619 static address locate_next_instruction(address inst); | |
620 | |
304 | 621 // Utilities |
622 | |
623 #ifdef _LP64 | |
624 static bool is_simm(int64_t x, int nbits) { return -( CONST64(1) << (nbits-1) ) <= x && x < ( CONST64(1) << (nbits-1) ); } | |
625 static bool is_simm32(int64_t x) { return x == (int64_t)(int32_t)x; } | |
626 #else | |
627 static bool is_simm(int32_t x, int nbits) { return -( 1 << (nbits-1) ) <= x && x < ( 1 << (nbits-1) ); } | |
628 static bool is_simm32(int32_t x) { return true; } | |
629 #endif // LP64 | |
630 | |
631 // Generic instructions | |
632 // Does 32bit or 64bit as needed for the platform. In some sense these | |
633 // belong in macro assembler but there is no need for both varieties to exist | |
634 | |
635 void lea(Register dst, Address src); | |
636 | |
637 void mov(Register dst, Register src); | |
638 | |
639 void pusha(); | |
640 void popa(); | |
641 | |
642 void pushf(); | |
643 void popf(); | |
644 | |
645 void push(int32_t imm32); | |
646 | |
647 void push(Register src); | |
648 | |
649 void pop(Register dst); | |
650 | |
651 // These are dummies to prevent surprise implicit conversions to Register | |
652 void push(void* v); | |
653 void pop(void* v); | |
654 | |
655 | |
656 // These do register sized moves/scans | |
657 void rep_mov(); | |
658 void rep_set(); | |
659 void repne_scan(); | |
660 #ifdef _LP64 | |
661 void repne_scanl(); | |
662 #endif | |
663 | |
664 // Vanilla instructions in lexical order | |
665 | |
666 void adcl(Register dst, int32_t imm32); | |
0 | 667 void adcl(Register dst, Address src); |
668 void adcl(Register dst, Register src); | |
669 | |
304 | 670 void adcq(Register dst, int32_t imm32); |
671 void adcq(Register dst, Address src); | |
672 void adcq(Register dst, Register src); | |
673 | |
674 | |
675 void addl(Address dst, int32_t imm32); | |
0 | 676 void addl(Address dst, Register src); |
304 | 677 void addl(Register dst, int32_t imm32); |
0 | 678 void addl(Register dst, Address src); |
679 void addl(Register dst, Register src); | |
680 | |
304 | 681 void addq(Address dst, int32_t imm32); |
682 void addq(Address dst, Register src); | |
683 void addq(Register dst, int32_t imm32); | |
684 void addq(Register dst, Address src); | |
685 void addq(Register dst, Register src); | |
686 | |
687 | |
0 | 688 void addr_nop_4(); |
689 void addr_nop_5(); | |
690 void addr_nop_7(); | |
691 void addr_nop_8(); | |
692 | |
304 | 693 // Add Scalar Double-Precision Floating-Point Values |
694 void addsd(XMMRegister dst, Address src); | |
695 void addsd(XMMRegister dst, XMMRegister src); | |
696 | |
697 // Add Scalar Single-Precision Floating-Point Values | |
698 void addss(XMMRegister dst, Address src); | |
699 void addss(XMMRegister dst, XMMRegister src); | |
700 | |
701 void andl(Register dst, int32_t imm32); | |
702 void andl(Register dst, Address src); | |
703 void andl(Register dst, Register src); | |
704 | |
705 void andq(Register dst, int32_t imm32); | |
706 void andq(Register dst, Address src); | |
707 void andq(Register dst, Register src); | |
708 | |
709 | |
710 // Bitwise Logical AND of Packed Double-Precision Floating-Point Values | |
711 void andpd(XMMRegister dst, Address src); | |
712 void andpd(XMMRegister dst, XMMRegister src); | |
713 | |
714 void bswapl(Register reg); | |
715 | |
716 void bswapq(Register reg); | |
717 | |
0 | 718 void call(Label& L, relocInfo::relocType rtype); |
719 void call(Register reg); // push pc; pc <- reg | |
720 void call(Address adr); // push pc; pc <- adr | |
721 | |
304 | 722 void cdql(); |
723 | |
724 void cdqq(); | |
725 | |
726 void cld() { emit_byte(0xfc); } | |
727 | |
728 void clflush(Address adr); | |
729 | |
730 void cmovl(Condition cc, Register dst, Register src); | |
731 void cmovl(Condition cc, Register dst, Address src); | |
732 | |
733 void cmovq(Condition cc, Register dst, Register src); | |
734 void cmovq(Condition cc, Register dst, Address src); | |
735 | |
736 | |
737 void cmpb(Address dst, int imm8); | |
738 | |
739 void cmpl(Address dst, int32_t imm32); | |
740 | |
741 void cmpl(Register dst, int32_t imm32); | |
742 void cmpl(Register dst, Register src); | |
743 void cmpl(Register dst, Address src); | |
744 | |
745 void cmpq(Address dst, int32_t imm32); | |
746 void cmpq(Address dst, Register src); | |
747 | |
748 void cmpq(Register dst, int32_t imm32); | |
749 void cmpq(Register dst, Register src); | |
750 void cmpq(Register dst, Address src); | |
751 | |
752 // these are dummies used to catch attempting to convert NULL to Register | |
753 void cmpl(Register dst, void* junk); // dummy | |
754 void cmpq(Register dst, void* junk); // dummy | |
755 | |
756 void cmpw(Address dst, int imm16); | |
757 | |
758 void cmpxchg8 (Address adr); | |
759 | |
760 void cmpxchgl(Register reg, Address adr); | |
761 | |
762 void cmpxchgq(Register reg, Address adr); | |
763 | |
764 // Ordered Compare Scalar Double-Precision Floating-Point Values and set EFLAGS | |
765 void comisd(XMMRegister dst, Address src); | |
766 | |
767 // Ordered Compare Scalar Single-Precision Floating-Point Values and set EFLAGS | |
768 void comiss(XMMRegister dst, Address src); | |
769 | |
770 // Identify processor type and features | |
771 void cpuid() { | |
772 emit_byte(0x0F); | |
773 emit_byte(0xA2); | |
774 } | |
775 | |
776 // Convert Scalar Double-Precision Floating-Point Value to Scalar Single-Precision Floating-Point Value | |
777 void cvtsd2ss(XMMRegister dst, XMMRegister src); | |
778 | |
779 // Convert Doubleword Integer to Scalar Double-Precision Floating-Point Value | |
780 void cvtsi2sdl(XMMRegister dst, Register src); | |
781 void cvtsi2sdq(XMMRegister dst, Register src); | |
782 | |
783 // Convert Doubleword Integer to Scalar Single-Precision Floating-Point Value | |
784 void cvtsi2ssl(XMMRegister dst, Register src); | |
785 void cvtsi2ssq(XMMRegister dst, Register src); | |
786 | |
787 // Convert Packed Signed Doubleword Integers to Packed Double-Precision Floating-Point Value | |
788 void cvtdq2pd(XMMRegister dst, XMMRegister src); | |
789 | |
790 // Convert Packed Signed Doubleword Integers to Packed Single-Precision Floating-Point Value | |
791 void cvtdq2ps(XMMRegister dst, XMMRegister src); | |
792 | |
793 // Convert Scalar Single-Precision Floating-Point Value to Scalar Double-Precision Floating-Point Value | |
794 void cvtss2sd(XMMRegister dst, XMMRegister src); | |
795 | |
796 // Convert with Truncation Scalar Double-Precision Floating-Point Value to Doubleword Integer | |
797 void cvttsd2sil(Register dst, Address src); | |
798 void cvttsd2sil(Register dst, XMMRegister src); | |
799 void cvttsd2siq(Register dst, XMMRegister src); | |
800 | |
801 // Convert with Truncation Scalar Single-Precision Floating-Point Value to Doubleword Integer | |
802 void cvttss2sil(Register dst, XMMRegister src); | |
803 void cvttss2siq(Register dst, XMMRegister src); | |
804 | |
805 // Divide Scalar Double-Precision Floating-Point Values | |
806 void divsd(XMMRegister dst, Address src); | |
807 void divsd(XMMRegister dst, XMMRegister src); | |
808 | |
809 // Divide Scalar Single-Precision Floating-Point Values | |
810 void divss(XMMRegister dst, Address src); | |
811 void divss(XMMRegister dst, XMMRegister src); | |
812 | |
813 void emms(); | |
814 | |
815 void fabs(); | |
816 | |
817 void fadd(int i); | |
818 | |
819 void fadd_d(Address src); | |
820 void fadd_s(Address src); | |
821 | |
822 // "Alternate" versions of x87 instructions place result down in FPU | |
823 // stack instead of on TOS | |
824 | |
825 void fadda(int i); // "alternate" fadd | |
826 void faddp(int i = 1); | |
827 | |
828 void fchs(); | |
829 | |
830 void fcom(int i); | |
831 | |
832 void fcomp(int i = 1); | |
833 void fcomp_d(Address src); | |
834 void fcomp_s(Address src); | |
835 | |
836 void fcompp(); | |
837 | |
838 void fcos(); | |
839 | |
840 void fdecstp(); | |
841 | |
842 void fdiv(int i); | |
843 void fdiv_d(Address src); | |
844 void fdivr_s(Address src); | |
845 void fdiva(int i); // "alternate" fdiv | |
846 void fdivp(int i = 1); | |
847 | |
848 void fdivr(int i); | |
849 void fdivr_d(Address src); | |
850 void fdiv_s(Address src); | |
851 | |
852 void fdivra(int i); // "alternate" reversed fdiv | |
853 | |
854 void fdivrp(int i = 1); | |
855 | |
856 void ffree(int i = 0); | |
857 | |
858 void fild_d(Address adr); | |
859 void fild_s(Address adr); | |
860 | |
861 void fincstp(); | |
862 | |
863 void finit(); | |
864 | |
865 void fist_s (Address adr); | |
866 void fistp_d(Address adr); | |
867 void fistp_s(Address adr); | |
868 | |
869 void fld1(); | |
870 | |
871 void fld_d(Address adr); | |
872 void fld_s(Address adr); | |
873 void fld_s(int index); | |
874 void fld_x(Address adr); // extended-precision (80-bit) format | |
875 | |
876 void fldcw(Address src); | |
877 | |
878 void fldenv(Address src); | |
879 | |
880 void fldlg2(); | |
881 | |
882 void fldln2(); | |
883 | |
884 void fldz(); | |
885 | |
886 void flog(); | |
887 void flog10(); | |
888 | |
889 void fmul(int i); | |
890 | |
891 void fmul_d(Address src); | |
892 void fmul_s(Address src); | |
893 | |
894 void fmula(int i); // "alternate" fmul | |
895 | |
896 void fmulp(int i = 1); | |
897 | |
898 void fnsave(Address dst); | |
899 | |
900 void fnstcw(Address src); | |
901 | |
902 void fnstsw_ax(); | |
903 | |
904 void fprem(); | |
905 void fprem1(); | |
906 | |
907 void frstor(Address src); | |
908 | |
909 void fsin(); | |
910 | |
911 void fsqrt(); | |
912 | |
913 void fst_d(Address adr); | |
914 void fst_s(Address adr); | |
915 | |
916 void fstp_d(Address adr); | |
917 void fstp_d(int index); | |
918 void fstp_s(Address adr); | |
919 void fstp_x(Address adr); // extended-precision (80-bit) format | |
920 | |
921 void fsub(int i); | |
922 void fsub_d(Address src); | |
923 void fsub_s(Address src); | |
924 | |
925 void fsuba(int i); // "alternate" fsub | |
926 | |
927 void fsubp(int i = 1); | |
928 | |
929 void fsubr(int i); | |
930 void fsubr_d(Address src); | |
931 void fsubr_s(Address src); | |
932 | |
933 void fsubra(int i); // "alternate" reversed fsub | |
934 | |
935 void fsubrp(int i = 1); | |
936 | |
937 void ftan(); | |
938 | |
939 void ftst(); | |
940 | |
941 void fucomi(int i = 1); | |
942 void fucomip(int i = 1); | |
943 | |
944 void fwait(); | |
945 | |
946 void fxch(int i = 1); | |
947 | |
948 void fxrstor(Address src); | |
949 | |
950 void fxsave(Address dst); | |
951 | |
952 void fyl2x(); | |
953 | |
954 void hlt(); | |
955 | |
956 void idivl(Register src); | |
957 | |
958 void idivq(Register src); | |
959 | |
960 void imull(Register dst, Register src); | |
961 void imull(Register dst, Register src, int value); | |
962 | |
963 void imulq(Register dst, Register src); | |
964 void imulq(Register dst, Register src, int value); | |
965 | |
0 | 966 |
967 // jcc is the generic conditional branch generator to run- | |
968 // time routines, jcc is used for branches to labels. jcc | |
969 // takes a branch opcode (cc) and a label (L) and generates | |
970 // either a backward branch or a forward branch and links it | |
971 // to the label fixup chain. Usage: | |
972 // | |
973 // Label L; // unbound label | |
974 // jcc(cc, L); // forward branch to unbound label | |
975 // bind(L); // bind label to the current pc | |
976 // jcc(cc, L); // backward branch to bound label | |
977 // bind(L); // illegal: a label may be bound only once | |
978 // | |
979 // Note: The same Label can be used for forward and backward branches | |
980 // but it may be bound only once. | |
981 | |
982 void jcc(Condition cc, Label& L, | |
983 relocInfo::relocType rtype = relocInfo::none); | |
984 | |
985 // Conditional jump to a 8-bit offset to L. | |
986 // WARNING: be very careful using this for forward jumps. If the label is | |
987 // not bound within an 8-bit offset of this instruction, a run-time error | |
988 // will occur. | |
989 void jccb(Condition cc, Label& L); | |
990 | |
304 | 991 void jmp(Address entry); // pc <- entry |
992 | |
993 // Label operations & relative jumps (PPUM Appendix D) | |
994 void jmp(Label& L, relocInfo::relocType rtype = relocInfo::none); // unconditional jump to L | |
995 | |
996 void jmp(Register entry); // pc <- entry | |
997 | |
998 // Unconditional 8-bit offset jump to L. | |
999 // WARNING: be very careful using this for forward jumps. If the label is | |
1000 // not bound within an 8-bit offset of this instruction, a run-time error | |
1001 // will occur. | |
1002 void jmpb(Label& L); | |
1003 | |
1004 void ldmxcsr( Address src ); | |
1005 | |
1006 void leal(Register dst, Address src); | |
1007 | |
1008 void leaq(Register dst, Address src); | |
1009 | |
1010 void lfence() { | |
1011 emit_byte(0x0F); | |
1012 emit_byte(0xAE); | |
1013 emit_byte(0xE8); | |
1014 } | |
1015 | |
1016 void lock(); | |
1017 | |
1018 enum Membar_mask_bits { | |
1019 StoreStore = 1 << 3, | |
1020 LoadStore = 1 << 2, | |
1021 StoreLoad = 1 << 1, | |
1022 LoadLoad = 1 << 0 | |
1023 }; | |
1024 | |
1025 // Serializes memory. | |
1026 void membar(Membar_mask_bits order_constraint) { | |
1027 // We only have to handle StoreLoad and LoadLoad | |
1028 if (order_constraint & StoreLoad) { | |
1029 // MFENCE subsumes LFENCE | |
1030 mfence(); | |
1031 } /* [jk] not needed currently: else if (order_constraint & LoadLoad) { | |
1032 lfence(); | |
1033 } */ | |
1034 } | |
1035 | |
1036 void mfence(); | |
1037 | |
1038 // Moves | |
1039 | |
1040 void mov64(Register dst, int64_t imm64); | |
1041 | |
1042 void movb(Address dst, Register src); | |
1043 void movb(Address dst, int imm8); | |
1044 void movb(Register dst, Address src); | |
1045 | |
1046 void movdl(XMMRegister dst, Register src); | |
1047 void movdl(Register dst, XMMRegister src); | |
1048 | |
1049 // Move Double Quadword | |
1050 void movdq(XMMRegister dst, Register src); | |
1051 void movdq(Register dst, XMMRegister src); | |
1052 | |
1053 // Move Aligned Double Quadword | |
1054 void movdqa(Address dst, XMMRegister src); | |
1055 void movdqa(XMMRegister dst, Address src); | |
1056 void movdqa(XMMRegister dst, XMMRegister src); | |
1057 | |
405 | 1058 // Move Unaligned Double Quadword |
1059 void movdqu(Address dst, XMMRegister src); | |
1060 void movdqu(XMMRegister dst, Address src); | |
1061 void movdqu(XMMRegister dst, XMMRegister src); | |
1062 | |
304 | 1063 void movl(Register dst, int32_t imm32); |
1064 void movl(Address dst, int32_t imm32); | |
1065 void movl(Register dst, Register src); | |
1066 void movl(Register dst, Address src); | |
1067 void movl(Address dst, Register src); | |
1068 | |
1069 // These dummies prevent using movl from converting a zero (like NULL) into Register | |
1070 // by giving the compiler two choices it can't resolve | |
1071 | |
1072 void movl(Address dst, void* junk); | |
1073 void movl(Register dst, void* junk); | |
1074 | |
1075 #ifdef _LP64 | |
1076 void movq(Register dst, Register src); | |
1077 void movq(Register dst, Address src); | |
1078 void movq(Address dst, Register src); | |
1079 #endif | |
1080 | |
1081 void movq(Address dst, MMXRegister src ); | |
1082 void movq(MMXRegister dst, Address src ); | |
1083 | |
1084 #ifdef _LP64 | |
1085 // These dummies prevent using movq from converting a zero (like NULL) into Register | |
1086 // by giving the compiler two choices it can't resolve | |
1087 | |
1088 void movq(Address dst, void* dummy); | |
1089 void movq(Register dst, void* dummy); | |
1090 #endif | |
1091 | |
1092 // Move Quadword | |
1093 void movq(Address dst, XMMRegister src); | |
1094 void movq(XMMRegister dst, Address src); | |
1095 | |
1096 void movsbl(Register dst, Address src); | |
1097 void movsbl(Register dst, Register src); | |
1098 | |
1099 #ifdef _LP64 | |
1100 // Move signed 32bit immediate to 64bit extending sign | |
1101 void movslq(Address dst, int32_t imm64); | |
1102 void movslq(Register dst, int32_t imm64); | |
1103 | |
1104 void movslq(Register dst, Address src); | |
1105 void movslq(Register dst, Register src); | |
1106 void movslq(Register dst, void* src); // Dummy declaration to cause NULL to be ambiguous | |
1107 #endif | |
1108 | |
1109 void movswl(Register dst, Address src); | |
1110 void movswl(Register dst, Register src); | |
1111 | |
1112 void movw(Address dst, int imm16); | |
1113 void movw(Register dst, Address src); | |
1114 void movw(Address dst, Register src); | |
1115 | |
1116 void movzbl(Register dst, Address src); | |
1117 void movzbl(Register dst, Register src); | |
1118 | |
1119 void movzwl(Register dst, Address src); | |
1120 void movzwl(Register dst, Register src); | |
1121 | |
1122 void mull(Address src); | |
1123 void mull(Register src); | |
1124 | |
1125 // Multiply Scalar Double-Precision Floating-Point Values | |
1126 void mulsd(XMMRegister dst, Address src); | |
1127 void mulsd(XMMRegister dst, XMMRegister src); | |
1128 | |
1129 // Multiply Scalar Single-Precision Floating-Point Values | |
1130 void mulss(XMMRegister dst, Address src); | |
1131 void mulss(XMMRegister dst, XMMRegister src); | |
1132 | |
1133 void negl(Register dst); | |
1134 | |
1135 #ifdef _LP64 | |
1136 void negq(Register dst); | |
1137 #endif | |
1138 | |
1139 void nop(int i = 1); | |
1140 | |
1141 void notl(Register dst); | |
1142 | |
1143 #ifdef _LP64 | |
1144 void notq(Register dst); | |
1145 #endif | |
1146 | |
1147 void orl(Address dst, int32_t imm32); | |
1148 void orl(Register dst, int32_t imm32); | |
1149 void orl(Register dst, Address src); | |
1150 void orl(Register dst, Register src); | |
1151 | |
1152 void orq(Address dst, int32_t imm32); | |
1153 void orq(Register dst, int32_t imm32); | |
1154 void orq(Register dst, Address src); | |
1155 void orq(Register dst, Register src); | |
1156 | |
1157 void popl(Address dst); | |
1158 | |
1159 #ifdef _LP64 | |
1160 void popq(Address dst); | |
1161 #endif | |
1162 | |
1163 // Prefetches (SSE, SSE2, 3DNOW only) | |
1164 | |
1165 void prefetchnta(Address src); | |
1166 void prefetchr(Address src); | |
1167 void prefetcht0(Address src); | |
1168 void prefetcht1(Address src); | |
1169 void prefetcht2(Address src); | |
1170 void prefetchw(Address src); | |
1171 | |
1172 // Shuffle Packed Doublewords | |
1173 void pshufd(XMMRegister dst, XMMRegister src, int mode); | |
1174 void pshufd(XMMRegister dst, Address src, int mode); | |
1175 | |
1176 // Shuffle Packed Low Words | |
1177 void pshuflw(XMMRegister dst, XMMRegister src, int mode); | |
1178 void pshuflw(XMMRegister dst, Address src, int mode); | |
1179 | |
1180 // Shift Right Logical Quadword Immediate | |
1181 void psrlq(XMMRegister dst, int shift); | |
1182 | |
1183 // Interleave Low Bytes | |
1184 void punpcklbw(XMMRegister dst, XMMRegister src); | |
1185 | |
1186 void pushl(Address src); | |
1187 | |
1188 void pushq(Address src); | |
1189 | |
1190 // Xor Packed Byte Integer Values | |
1191 void pxor(XMMRegister dst, Address src); | |
1192 void pxor(XMMRegister dst, XMMRegister src); | |
1193 | |
1194 void rcll(Register dst, int imm8); | |
1195 | |
1196 void rclq(Register dst, int imm8); | |
1197 | |
1198 void ret(int imm16); | |
0 | 1199 |
1200 void sahf(); | |
1201 | |
304 | 1202 void sarl(Register dst, int imm8); |
1203 void sarl(Register dst); | |
1204 | |
1205 void sarq(Register dst, int imm8); | |
1206 void sarq(Register dst); | |
1207 | |
1208 void sbbl(Address dst, int32_t imm32); | |
1209 void sbbl(Register dst, int32_t imm32); | |
1210 void sbbl(Register dst, Address src); | |
1211 void sbbl(Register dst, Register src); | |
1212 | |
1213 void sbbq(Address dst, int32_t imm32); | |
1214 void sbbq(Register dst, int32_t imm32); | |
1215 void sbbq(Register dst, Address src); | |
1216 void sbbq(Register dst, Register src); | |
1217 | |
1218 void setb(Condition cc, Register dst); | |
1219 | |
1220 void shldl(Register dst, Register src); | |
1221 | |
1222 void shll(Register dst, int imm8); | |
1223 void shll(Register dst); | |
1224 | |
1225 void shlq(Register dst, int imm8); | |
1226 void shlq(Register dst); | |
1227 | |
1228 void shrdl(Register dst, Register src); | |
1229 | |
1230 void shrl(Register dst, int imm8); | |
1231 void shrl(Register dst); | |
1232 | |
1233 void shrq(Register dst, int imm8); | |
1234 void shrq(Register dst); | |
1235 | |
1236 void smovl(); // QQQ generic? | |
1237 | |
1238 // Compute Square Root of Scalar Double-Precision Floating-Point Value | |
1239 void sqrtsd(XMMRegister dst, Address src); | |
1240 void sqrtsd(XMMRegister dst, XMMRegister src); | |
1241 | |
1242 void std() { emit_byte(0xfd); } | |
1243 | |
1244 void stmxcsr( Address dst ); | |
1245 | |
1246 void subl(Address dst, int32_t imm32); | |
1247 void subl(Address dst, Register src); | |
1248 void subl(Register dst, int32_t imm32); | |
1249 void subl(Register dst, Address src); | |
1250 void subl(Register dst, Register src); | |
1251 | |
1252 void subq(Address dst, int32_t imm32); | |
1253 void subq(Address dst, Register src); | |
1254 void subq(Register dst, int32_t imm32); | |
1255 void subq(Register dst, Address src); | |
1256 void subq(Register dst, Register src); | |
1257 | |
1258 | |
1259 // Subtract Scalar Double-Precision Floating-Point Values | |
1260 void subsd(XMMRegister dst, Address src); | |
0 | 1261 void subsd(XMMRegister dst, XMMRegister src); |
1262 | |
304 | 1263 // Subtract Scalar Single-Precision Floating-Point Values |
1264 void subss(XMMRegister dst, Address src); | |
1265 void subss(XMMRegister dst, XMMRegister src); | |
1266 | |
1267 void testb(Register dst, int imm8); | |
1268 | |
1269 void testl(Register dst, int32_t imm32); | |
1270 void testl(Register dst, Register src); | |
1271 void testl(Register dst, Address src); | |
1272 | |
1273 void testq(Register dst, int32_t imm32); | |
1274 void testq(Register dst, Register src); | |
1275 | |
1276 | |
1277 // Unordered Compare Scalar Double-Precision Floating-Point Values and set EFLAGS | |
1278 void ucomisd(XMMRegister dst, Address src); | |
0 | 1279 void ucomisd(XMMRegister dst, XMMRegister src); |
1280 | |
304 | 1281 // Unordered Compare Scalar Single-Precision Floating-Point Values and set EFLAGS |
1282 void ucomiss(XMMRegister dst, Address src); | |
1283 void ucomiss(XMMRegister dst, XMMRegister src); | |
1284 | |
1285 void xaddl(Address dst, Register src); | |
1286 | |
1287 void xaddq(Address dst, Register src); | |
1288 | |
1289 void xchgl(Register reg, Address adr); | |
1290 void xchgl(Register dst, Register src); | |
1291 | |
1292 void xchgq(Register reg, Address adr); | |
1293 void xchgq(Register dst, Register src); | |
1294 | |
1295 void xorl(Register dst, int32_t imm32); | |
1296 void xorl(Register dst, Address src); | |
1297 void xorl(Register dst, Register src); | |
1298 | |
1299 void xorq(Register dst, Address src); | |
1300 void xorq(Register dst, Register src); | |
1301 | |
1302 // Bitwise Logical XOR of Packed Double-Precision Floating-Point Values | |
1303 void xorpd(XMMRegister dst, Address src); | |
1304 void xorpd(XMMRegister dst, XMMRegister src); | |
1305 | |
1306 // Bitwise Logical XOR of Packed Single-Precision Floating-Point Values | |
1307 void xorps(XMMRegister dst, Address src); | |
0 | 1308 void xorps(XMMRegister dst, XMMRegister src); |
304 | 1309 |
1310 void set_byte_if_not_zero(Register dst); // sets reg to 1 if not zero, otherwise 0 | |
0 | 1311 }; |
1312 | |
1313 | |
1314 // MacroAssembler extends Assembler by frequently used macros. | |
1315 // | |
1316 // Instructions for which a 'better' code sequence exists depending | |
1317 // on arguments should also go in here. | |
1318 | |
1319 class MacroAssembler: public Assembler { | |
342
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
1320 friend class LIR_Assembler; |
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
1321 friend class Runtime1; // as_Address() |
0 | 1322 protected: |
1323 | |
1324 Address as_Address(AddressLiteral adr); | |
1325 Address as_Address(ArrayAddress adr); | |
1326 | |
1327 // Support for VM calls | |
1328 // | |
1329 // This is the base routine called by the different versions of call_VM_leaf. The interpreter | |
1330 // may customize this version by overriding it for its purposes (e.g., to save/restore | |
1331 // additional registers when doing a VM call). | |
1332 #ifdef CC_INTERP | |
1333 // c++ interpreter never wants to use interp_masm version of call_VM | |
1334 #define VIRTUAL | |
1335 #else | |
1336 #define VIRTUAL virtual | |
1337 #endif | |
1338 | |
1339 VIRTUAL void call_VM_leaf_base( | |
1340 address entry_point, // the entry point | |
1341 int number_of_arguments // the number of arguments to pop after the call | |
1342 ); | |
1343 | |
1344 // This is the base routine called by the different versions of call_VM. The interpreter | |
1345 // may customize this version by overriding it for its purposes (e.g., to save/restore | |
1346 // additional registers when doing a VM call). | |
1347 // | |
1348 // If no java_thread register is specified (noreg) than rdi will be used instead. call_VM_base | |
1349 // returns the register which contains the thread upon return. If a thread register has been | |
1350 // specified, the return value will correspond to that register. If no last_java_sp is specified | |
1351 // (noreg) than rsp will be used instead. | |
1352 VIRTUAL void call_VM_base( // returns the register containing the thread upon return | |
1353 Register oop_result, // where an oop-result ends up if any; use noreg otherwise | |
1354 Register java_thread, // the thread if computed before ; use noreg otherwise | |
1355 Register last_java_sp, // to set up last_Java_frame in stubs; use noreg otherwise | |
1356 address entry_point, // the entry point | |
1357 int number_of_arguments, // the number of arguments (w/o thread) to pop after the call | |
1358 bool check_exceptions // whether to check for pending exceptions after return | |
1359 ); | |
1360 | |
1361 // These routines should emit JVMTI PopFrame and ForceEarlyReturn handling code. | |
1362 // The implementation is only non-empty for the InterpreterMacroAssembler, | |
1363 // as only the interpreter handles PopFrame and ForceEarlyReturn requests. | |
1364 virtual void check_and_handle_popframe(Register java_thread); | |
1365 virtual void check_and_handle_earlyret(Register java_thread); | |
1366 | |
1367 void call_VM_helper(Register oop_result, address entry_point, int number_of_arguments, bool check_exceptions = true); | |
1368 | |
1369 // helpers for FPU flag access | |
1370 // tmp is a temporary register, if none is available use noreg | |
1371 void save_rax (Register tmp); | |
1372 void restore_rax(Register tmp); | |
1373 | |
1374 public: | |
1375 MacroAssembler(CodeBuffer* code) : Assembler(code) {} | |
1376 | |
1377 // Support for NULL-checks | |
1378 // | |
1379 // Generates code that causes a NULL OS exception if the content of reg is NULL. | |
1380 // If the accessed location is M[reg + offset] and the offset is known, provide the | |
1381 // offset. No explicit code generation is needed if the offset is within a certain | |
1382 // range (0 <= offset <= page_size). | |
1383 | |
1384 void null_check(Register reg, int offset = -1); | |
168
7793bd37a336
6705887: Compressed Oops: generate x64 addressing and implicit null checks with narrow oops
kvn
parents:
71
diff
changeset
|
1385 static bool needs_explicit_null_check(intptr_t offset); |
0 | 1386 |
1387 // Required platform-specific helpers for Label::patch_instructions. | |
1388 // They _shadow_ the declarations in AbstractAssembler, which are undefined. | |
1389 void pd_patch_instruction(address branch, address target); | |
1390 #ifndef PRODUCT | |
1391 static void pd_print_patched_instruction(address branch); | |
1392 #endif | |
1393 | |
1394 // The following 4 methods return the offset of the appropriate move instruction | |
1395 | |
1396 // Support for fast byte/word loading with zero extension (depending on particular CPU) | |
1397 int load_unsigned_byte(Register dst, Address src); | |
1398 int load_unsigned_word(Register dst, Address src); | |
1399 | |
1400 // Support for fast byte/word loading with sign extension (depending on particular CPU) | |
1401 int load_signed_byte(Register dst, Address src); | |
1402 int load_signed_word(Register dst, Address src); | |
1403 | |
1404 // Support for sign-extension (hi:lo = extend_sign(lo)) | |
1405 void extend_sign(Register hi, Register lo); | |
1406 | |
1407 // Support for inc/dec with optimal instruction selection depending on value | |
304 | 1408 |
1409 void increment(Register reg, int value = 1) { LP64_ONLY(incrementq(reg, value)) NOT_LP64(incrementl(reg, value)) ; } | |
1410 void decrement(Register reg, int value = 1) { LP64_ONLY(decrementq(reg, value)) NOT_LP64(decrementl(reg, value)) ; } | |
1411 | |
1412 void decrementl(Address dst, int value = 1); | |
1413 void decrementl(Register reg, int value = 1); | |
1414 | |
1415 void decrementq(Register reg, int value = 1); | |
1416 void decrementq(Address dst, int value = 1); | |
1417 | |
1418 void incrementl(Address dst, int value = 1); | |
1419 void incrementl(Register reg, int value = 1); | |
1420 | |
1421 void incrementq(Register reg, int value = 1); | |
1422 void incrementq(Address dst, int value = 1); | |
1423 | |
0 | 1424 |
1425 // Support optimal SSE move instructions. | |
1426 void movflt(XMMRegister dst, XMMRegister src) { | |
1427 if (UseXmmRegToRegMoveAll) { movaps(dst, src); return; } | |
1428 else { movss (dst, src); return; } | |
1429 } | |
1430 void movflt(XMMRegister dst, Address src) { movss(dst, src); } | |
1431 void movflt(XMMRegister dst, AddressLiteral src); | |
1432 void movflt(Address dst, XMMRegister src) { movss(dst, src); } | |
1433 | |
1434 void movdbl(XMMRegister dst, XMMRegister src) { | |
1435 if (UseXmmRegToRegMoveAll) { movapd(dst, src); return; } | |
1436 else { movsd (dst, src); return; } | |
1437 } | |
1438 | |
1439 void movdbl(XMMRegister dst, AddressLiteral src); | |
1440 | |
1441 void movdbl(XMMRegister dst, Address src) { | |
1442 if (UseXmmLoadAndClearUpper) { movsd (dst, src); return; } | |
1443 else { movlpd(dst, src); return; } | |
1444 } | |
1445 void movdbl(Address dst, XMMRegister src) { movsd(dst, src); } | |
1446 | |
304 | 1447 void incrementl(AddressLiteral dst); |
1448 void incrementl(ArrayAddress dst); | |
0 | 1449 |
1450 // Alignment | |
1451 void align(int modulus); | |
1452 | |
1453 // Misc | |
1454 void fat_nop(); // 5 byte nop | |
1455 | |
1456 // Stack frame creation/removal | |
1457 void enter(); | |
1458 void leave(); | |
1459 | |
1460 // Support for getting the JavaThread pointer (i.e.; a reference to thread-local information) | |
1461 // The pointer will be loaded into the thread register. | |
1462 void get_thread(Register thread); | |
1463 | |
362 | 1464 |
0 | 1465 // Support for VM calls |
1466 // | |
1467 // It is imperative that all calls into the VM are handled via the call_VM macros. | |
1468 // They make sure that the stack linkage is setup correctly. call_VM's correspond | |
1469 // to ENTRY/ENTRY_X entry points while call_VM_leaf's correspond to LEAF entry points. | |
1470 | |
304 | 1471 |
1472 void call_VM(Register oop_result, | |
1473 address entry_point, | |
1474 bool check_exceptions = true); | |
1475 void call_VM(Register oop_result, | |
1476 address entry_point, | |
1477 Register arg_1, | |
1478 bool check_exceptions = true); | |
1479 void call_VM(Register oop_result, | |
1480 address entry_point, | |
1481 Register arg_1, Register arg_2, | |
1482 bool check_exceptions = true); | |
1483 void call_VM(Register oop_result, | |
1484 address entry_point, | |
1485 Register arg_1, Register arg_2, Register arg_3, | |
1486 bool check_exceptions = true); | |
1487 | |
1488 // Overloadings with last_Java_sp | |
1489 void call_VM(Register oop_result, | |
1490 Register last_java_sp, | |
1491 address entry_point, | |
1492 int number_of_arguments = 0, | |
1493 bool check_exceptions = true); | |
1494 void call_VM(Register oop_result, | |
1495 Register last_java_sp, | |
1496 address entry_point, | |
1497 Register arg_1, bool | |
1498 check_exceptions = true); | |
1499 void call_VM(Register oop_result, | |
1500 Register last_java_sp, | |
1501 address entry_point, | |
1502 Register arg_1, Register arg_2, | |
1503 bool check_exceptions = true); | |
1504 void call_VM(Register oop_result, | |
1505 Register last_java_sp, | |
1506 address entry_point, | |
1507 Register arg_1, Register arg_2, Register arg_3, | |
1508 bool check_exceptions = true); | |
1509 | |
1510 void call_VM_leaf(address entry_point, | |
1511 int number_of_arguments = 0); | |
1512 void call_VM_leaf(address entry_point, | |
1513 Register arg_1); | |
1514 void call_VM_leaf(address entry_point, | |
1515 Register arg_1, Register arg_2); | |
1516 void call_VM_leaf(address entry_point, | |
1517 Register arg_1, Register arg_2, Register arg_3); | |
0 | 1518 |
1519 // last Java Frame (fills frame anchor) | |
304 | 1520 void set_last_Java_frame(Register thread, |
1521 Register last_java_sp, | |
1522 Register last_java_fp, | |
1523 address last_java_pc); | |
1524 | |
1525 // thread in the default location (r15_thread on 64bit) | |
1526 void set_last_Java_frame(Register last_java_sp, | |
1527 Register last_java_fp, | |
1528 address last_java_pc); | |
1529 | |
0 | 1530 void reset_last_Java_frame(Register thread, bool clear_fp, bool clear_pc); |
1531 | |
304 | 1532 // thread in the default location (r15_thread on 64bit) |
1533 void reset_last_Java_frame(bool clear_fp, bool clear_pc); | |
1534 | |
0 | 1535 // Stores |
1536 void store_check(Register obj); // store check for obj - register is destroyed afterwards | |
1537 void store_check(Register obj, Address dst); // same as above, dst is exact store location (reg. is destroyed) | |
1538 | |
362 | 1539 void g1_write_barrier_pre(Register obj, |
1540 #ifndef _LP64 | |
1541 Register thread, | |
1542 #endif | |
1543 Register tmp, | |
1544 Register tmp2, | |
1545 bool tosca_live); | |
1546 void g1_write_barrier_post(Register store_addr, | |
1547 Register new_val, | |
1548 #ifndef _LP64 | |
1549 Register thread, | |
1550 #endif | |
1551 Register tmp, | |
1552 Register tmp2); | |
342
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
1553 |
37f87013dfd8
6711316: Open source the Garbage-First garbage collector
ysr
parents:
71
diff
changeset
|
1554 |
0 | 1555 // split store_check(Register obj) to enhance instruction interleaving |
1556 void store_check_part_1(Register obj); | |
1557 void store_check_part_2(Register obj); | |
1558 | |
1559 // C 'boolean' to Java boolean: x == 0 ? 0 : 1 | |
1560 void c2bool(Register x); | |
1561 | |
1562 // C++ bool manipulation | |
1563 | |
1564 void movbool(Register dst, Address src); | |
1565 void movbool(Address dst, bool boolconst); | |
1566 void movbool(Address dst, Register src); | |
1567 void testbool(Register dst); | |
1568 | |
304 | 1569 // oop manipulations |
1570 void load_klass(Register dst, Register src); | |
1571 void store_klass(Register dst, Register src); | |
1572 | |
1573 void load_prototype_header(Register dst, Register src); | |
1574 | |
1575 #ifdef _LP64 | |
1576 void store_klass_gap(Register dst, Register src); | |
1577 | |
1578 void load_heap_oop(Register dst, Address src); | |
1579 void store_heap_oop(Address dst, Register src); | |
1580 void encode_heap_oop(Register r); | |
1581 void decode_heap_oop(Register r); | |
1582 void encode_heap_oop_not_null(Register r); | |
1583 void decode_heap_oop_not_null(Register r); | |
1584 void encode_heap_oop_not_null(Register dst, Register src); | |
1585 void decode_heap_oop_not_null(Register dst, Register src); | |
1586 | |
1587 void set_narrow_oop(Register dst, jobject obj); | |
1588 | |
1589 // if heap base register is used - reinit it with the correct value | |
1590 void reinit_heapbase(); | |
1591 #endif // _LP64 | |
1592 | |
1593 // Int division/remainder for Java | |
0 | 1594 // (as idivl, but checks for special case as described in JVM spec.) |
1595 // returns idivl instruction offset for implicit exception handling | |
1596 int corrected_idivl(Register reg); | |
1597 | |
304 | 1598 // Long division/remainder for Java |
1599 // (as idivq, but checks for special case as described in JVM spec.) | |
1600 // returns idivq instruction offset for implicit exception handling | |
1601 int corrected_idivq(Register reg); | |
1602 | |
0 | 1603 void int3(); |
1604 | |
304 | 1605 // Long operation macros for a 32bit cpu |
0 | 1606 // Long negation for Java |
1607 void lneg(Register hi, Register lo); | |
1608 | |
1609 // Long multiplication for Java | |
304 | 1610 // (destroys contents of eax, ebx, ecx and edx) |
0 | 1611 void lmul(int x_rsp_offset, int y_rsp_offset); // rdx:rax = x * y |
1612 | |
1613 // Long shifts for Java | |
1614 // (semantics as described in JVM spec.) | |
1615 void lshl(Register hi, Register lo); // hi:lo << (rcx & 0x3f) | |
1616 void lshr(Register hi, Register lo, bool sign_extension = false); // hi:lo >> (rcx & 0x3f) | |
1617 | |
1618 // Long compare for Java | |
1619 // (semantics as described in JVM spec.) | |
1620 void lcmp2int(Register x_hi, Register x_lo, Register y_hi, Register y_lo); // x_hi = lcmp(x, y) | |
1621 | |
304 | 1622 |
1623 // misc | |
1624 | |
1625 // Sign extension | |
1626 void sign_extend_short(Register reg); | |
1627 void sign_extend_byte(Register reg); | |
1628 | |
1629 // Division by power of 2, rounding towards 0 | |
1630 void division_with_shift(Register reg, int shift_value); | |
1631 | |
0 | 1632 // Compares the top-most stack entries on the FPU stack and sets the eflags as follows: |
1633 // | |
1634 // CF (corresponds to C0) if x < y | |
1635 // PF (corresponds to C2) if unordered | |
1636 // ZF (corresponds to C3) if x = y | |
1637 // | |
1638 // The arguments are in reversed order on the stack (i.e., top of stack is first argument). | |
1639 // tmp is a temporary register, if none is available use noreg (only matters for non-P6 code) | |
1640 void fcmp(Register tmp); | |
1641 // Variant of the above which allows y to be further down the stack | |
1642 // and which only pops x and y if specified. If pop_right is | |
1643 // specified then pop_left must also be specified. | |
1644 void fcmp(Register tmp, int index, bool pop_left, bool pop_right); | |
1645 | |
1646 // Floating-point comparison for Java | |
1647 // Compares the top-most stack entries on the FPU stack and stores the result in dst. | |
1648 // The arguments are in reversed order on the stack (i.e., top of stack is first argument). | |
1649 // (semantics as described in JVM spec.) | |
1650 void fcmp2int(Register dst, bool unordered_is_less); | |
1651 // Variant of the above which allows y to be further down the stack | |
1652 // and which only pops x and y if specified. If pop_right is | |
1653 // specified then pop_left must also be specified. | |
1654 void fcmp2int(Register dst, bool unordered_is_less, int index, bool pop_left, bool pop_right); | |
1655 | |
1656 // Floating-point remainder for Java (ST0 = ST0 fremr ST1, ST1 is empty afterwards) | |
1657 // tmp is a temporary register, if none is available use noreg | |
1658 void fremr(Register tmp); | |
1659 | |
1660 | |
1661 // same as fcmp2int, but using SSE2 | |
1662 void cmpss2int(XMMRegister opr1, XMMRegister opr2, Register dst, bool unordered_is_less); | |
1663 void cmpsd2int(XMMRegister opr1, XMMRegister opr2, Register dst, bool unordered_is_less); | |
1664 | |
1665 // Inlined sin/cos generator for Java; must not use CPU instruction | |
1666 // directly on Intel as it does not have high enough precision | |
1667 // outside of the range [-pi/4, pi/4]. Extra argument indicate the | |
1668 // number of FPU stack slots in use; all but the topmost will | |
1669 // require saving if a slow case is necessary. Assumes argument is | |
1670 // on FP TOS; result is on FP TOS. No cpu registers are changed by | |
1671 // this code. | |
1672 void trigfunc(char trig, int num_fpu_regs_in_use = 1); | |
1673 | |
1674 // branch to L if FPU flag C2 is set/not set | |
1675 // tmp is a temporary register, if none is available use noreg | |
1676 void jC2 (Register tmp, Label& L); | |
1677 void jnC2(Register tmp, Label& L); | |
1678 | |
1679 // Pop ST (ffree & fincstp combined) | |
1680 void fpop(); | |
1681 | |
1682 // pushes double TOS element of FPU stack on CPU stack; pops from FPU stack | |
1683 void push_fTOS(); | |
1684 | |
1685 // pops double TOS element from CPU stack and pushes on FPU stack | |
1686 void pop_fTOS(); | |
1687 | |
1688 void empty_FPU_stack(); | |
1689 | |
1690 void push_IU_state(); | |
1691 void pop_IU_state(); | |
1692 | |
1693 void push_FPU_state(); | |
1694 void pop_FPU_state(); | |
1695 | |
1696 void push_CPU_state(); | |
1697 void pop_CPU_state(); | |
1698 | |
1699 // Round up to a power of two | |
1700 void round_to(Register reg, int modulus); | |
1701 | |
1702 // Callee saved registers handling | |
1703 void push_callee_saved_registers(); | |
1704 void pop_callee_saved_registers(); | |
1705 | |
1706 // allocation | |
1707 void eden_allocate( | |
1708 Register obj, // result: pointer to object after successful allocation | |
1709 Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise | |
1710 int con_size_in_bytes, // object size in bytes if known at compile time | |
1711 Register t1, // temp register | |
1712 Label& slow_case // continuation point if fast allocation fails | |
1713 ); | |
1714 void tlab_allocate( | |
1715 Register obj, // result: pointer to object after successful allocation | |
1716 Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise | |
1717 int con_size_in_bytes, // object size in bytes if known at compile time | |
1718 Register t1, // temp register | |
1719 Register t2, // temp register | |
1720 Label& slow_case // continuation point if fast allocation fails | |
1721 ); | |
1722 void tlab_refill(Label& retry_tlab, Label& try_eden, Label& slow_case); | |
1723 | |
1724 //---- | |
1725 void set_word_if_not_zero(Register reg); // sets reg to 1 if not zero, otherwise 0 | |
1726 | |
1727 // Debugging | |
304 | 1728 |
1729 // only if +VerifyOops | |
1730 void verify_oop(Register reg, const char* s = "broken oop"); | |
0 | 1731 void verify_oop_addr(Address addr, const char * s = "broken oop addr"); |
1732 | |
304 | 1733 // only if +VerifyFPU |
1734 void verify_FPU(int stack_depth, const char* s = "illegal FPU state"); | |
1735 | |
1736 // prints msg, dumps registers and stops execution | |
1737 void stop(const char* msg); | |
1738 | |
1739 // prints msg and continues | |
1740 void warn(const char* msg); | |
1741 | |
1742 static void debug32(int rdi, int rsi, int rbp, int rsp, int rbx, int rdx, int rcx, int rax, int eip, char* msg); | |
1743 static void debug64(char* msg, int64_t pc, int64_t regs[]); | |
1744 | |
0 | 1745 void os_breakpoint(); |
304 | 1746 |
0 | 1747 void untested() { stop("untested"); } |
304 | 1748 |
0 | 1749 void unimplemented(const char* what = "") { char* b = new char[1024]; jio_snprintf(b, sizeof(b), "unimplemented: %s", what); stop(b); } |
304 | 1750 |
0 | 1751 void should_not_reach_here() { stop("should not reach here"); } |
304 | 1752 |
0 | 1753 void print_CPU_state(); |
1754 | |
1755 // Stack overflow checking | |
1756 void bang_stack_with_offset(int offset) { | |
1757 // stack grows down, caller passes positive offset | |
1758 assert(offset > 0, "must bang with negative offset"); | |
1759 movl(Address(rsp, (-offset)), rax); | |
1760 } | |
1761 | |
1762 // Writes to stack successive pages until offset reached to check for | |
1763 // stack overflow + shadow pages. Also, clobbers tmp | |
1764 void bang_stack_size(Register size, Register tmp); | |
1765 | |
1766 // Support for serializing memory accesses between threads | |
1767 void serialize_memory(Register thread, Register tmp); | |
1768 | |
1769 void verify_tlab(); | |
1770 | |
1771 // Biased locking support | |
1772 // lock_reg and obj_reg must be loaded up with the appropriate values. | |
1773 // swap_reg must be rax, and is killed. | |
1774 // tmp_reg is optional. If it is supplied (i.e., != noreg) it will | |
1775 // be killed; if not supplied, push/pop will be used internally to | |
1776 // allocate a temporary (inefficient, avoid if possible). | |
1777 // Optional slow case is for implementations (interpreter and C1) which branch to | |
1778 // slow case directly. Leaves condition codes set for C2's Fast_Lock node. | |
1779 // Returns offset of first potentially-faulting instruction for null | |
1780 // check info (currently consumed only by C1). If | |
1781 // swap_reg_contains_mark is true then returns -1 as it is assumed | |
1782 // the calling code has already passed any potential faults. | |
420
a1980da045cc
6462850: generate biased locking code in C2 ideal graph
kvn
parents:
405
diff
changeset
|
1783 int biased_locking_enter(Register lock_reg, Register obj_reg, |
a1980da045cc
6462850: generate biased locking code in C2 ideal graph
kvn
parents:
405
diff
changeset
|
1784 Register swap_reg, Register tmp_reg, |
0 | 1785 bool swap_reg_contains_mark, |
1786 Label& done, Label* slow_case = NULL, | |
1787 BiasedLockingCounters* counters = NULL); | |
1788 void biased_locking_exit (Register obj_reg, Register temp_reg, Label& done); | |
1789 | |
1790 | |
1791 Condition negate_condition(Condition cond); | |
1792 | |
1793 // Instructions that use AddressLiteral operands. These instruction can handle 32bit/64bit | |
1794 // operands. In general the names are modified to avoid hiding the instruction in Assembler | |
1795 // so that we don't need to implement all the varieties in the Assembler with trivial wrappers | |
1796 // here in MacroAssembler. The major exception to this rule is call | |
1797 | |
1798 // Arithmetics | |
1799 | |
304 | 1800 |
1801 void addptr(Address dst, int32_t src) { LP64_ONLY(addq(dst, src)) NOT_LP64(addl(dst, src)) ; } | |
1802 void addptr(Address dst, Register src); | |
1803 | |
1804 void addptr(Register dst, Address src) { LP64_ONLY(addq(dst, src)) NOT_LP64(addl(dst, src)); } | |
1805 void addptr(Register dst, int32_t src); | |
1806 void addptr(Register dst, Register src); | |
1807 | |
1808 void andptr(Register dst, int32_t src); | |
1809 void andptr(Register src1, Register src2) { LP64_ONLY(andq(src1, src2)) NOT_LP64(andl(src1, src2)) ; } | |
1810 | |
1811 void cmp8(AddressLiteral src1, int imm); | |
1812 | |
1813 // renamed to drag out the casting of address to int32_t/intptr_t | |
0 | 1814 void cmp32(Register src1, int32_t imm); |
1815 | |
1816 void cmp32(AddressLiteral src1, int32_t imm); | |
1817 // compare reg - mem, or reg - &mem | |
1818 void cmp32(Register src1, AddressLiteral src2); | |
1819 | |
1820 void cmp32(Register src1, Address src2); | |
1821 | |
304 | 1822 #ifndef _LP64 |
1823 void cmpoop(Address dst, jobject obj); | |
1824 void cmpoop(Register dst, jobject obj); | |
1825 #endif // _LP64 | |
1826 | |
0 | 1827 // NOTE src2 must be the lval. This is NOT an mem-mem compare |
1828 void cmpptr(Address src1, AddressLiteral src2); | |
1829 | |
1830 void cmpptr(Register src1, AddressLiteral src2); | |
1831 | |
304 | 1832 void cmpptr(Register src1, Register src2) { LP64_ONLY(cmpq(src1, src2)) NOT_LP64(cmpl(src1, src2)) ; } |
1833 void cmpptr(Register src1, Address src2) { LP64_ONLY(cmpq(src1, src2)) NOT_LP64(cmpl(src1, src2)) ; } | |
1834 // void cmpptr(Address src1, Register src2) { LP64_ONLY(cmpq(src1, src2)) NOT_LP64(cmpl(src1, src2)) ; } | |
1835 | |
1836 void cmpptr(Register src1, int32_t src2) { LP64_ONLY(cmpq(src1, src2)) NOT_LP64(cmpl(src1, src2)) ; } | |
1837 void cmpptr(Address src1, int32_t src2) { LP64_ONLY(cmpq(src1, src2)) NOT_LP64(cmpl(src1, src2)) ; } | |
1838 | |
1839 // cmp64 to avoild hiding cmpq | |
1840 void cmp64(Register src1, AddressLiteral src); | |
1841 | |
1842 void cmpxchgptr(Register reg, Address adr); | |
1843 | |
1844 void locked_cmpxchgptr(Register reg, AddressLiteral adr); | |
1845 | |
1846 | |
1847 void imulptr(Register dst, Register src) { LP64_ONLY(imulq(dst, src)) NOT_LP64(imull(dst, src)); } | |
1848 | |
1849 | |
1850 void negptr(Register dst) { LP64_ONLY(negq(dst)) NOT_LP64(negl(dst)); } | |
1851 | |
1852 void notptr(Register dst) { LP64_ONLY(notq(dst)) NOT_LP64(notl(dst)); } | |
1853 | |
1854 void shlptr(Register dst, int32_t shift); | |
1855 void shlptr(Register dst) { LP64_ONLY(shlq(dst)) NOT_LP64(shll(dst)); } | |
1856 | |
1857 void shrptr(Register dst, int32_t shift); | |
1858 void shrptr(Register dst) { LP64_ONLY(shrq(dst)) NOT_LP64(shrl(dst)); } | |
1859 | |
1860 void sarptr(Register dst) { LP64_ONLY(sarq(dst)) NOT_LP64(sarl(dst)); } | |
1861 void sarptr(Register dst, int32_t src) { LP64_ONLY(sarq(dst, src)) NOT_LP64(sarl(dst, src)); } | |
1862 | |
1863 void subptr(Address dst, int32_t src) { LP64_ONLY(subq(dst, src)) NOT_LP64(subl(dst, src)); } | |
1864 | |
1865 void subptr(Register dst, Address src) { LP64_ONLY(subq(dst, src)) NOT_LP64(subl(dst, src)); } | |
1866 void subptr(Register dst, int32_t src); | |
1867 void subptr(Register dst, Register src); | |
1868 | |
1869 | |
1870 void sbbptr(Address dst, int32_t src) { LP64_ONLY(sbbq(dst, src)) NOT_LP64(sbbl(dst, src)); } | |
1871 void sbbptr(Register dst, int32_t src) { LP64_ONLY(sbbq(dst, src)) NOT_LP64(sbbl(dst, src)); } | |
1872 | |
1873 void xchgptr(Register src1, Register src2) { LP64_ONLY(xchgq(src1, src2)) NOT_LP64(xchgl(src1, src2)) ; } | |
1874 void xchgptr(Register src1, Address src2) { LP64_ONLY(xchgq(src1, src2)) NOT_LP64(xchgl(src1, src2)) ; } | |
1875 | |
1876 void xaddptr(Address src1, Register src2) { LP64_ONLY(xaddq(src1, src2)) NOT_LP64(xaddl(src1, src2)) ; } | |
1877 | |
1878 | |
0 | 1879 |
1880 // Helper functions for statistics gathering. | |
1881 // Conditionally (atomically, on MPs) increments passed counter address, preserving condition codes. | |
1882 void cond_inc32(Condition cond, AddressLiteral counter_addr); | |
1883 // Unconditional atomic increment. | |
1884 void atomic_incl(AddressLiteral counter_addr); | |
1885 | |
1886 void lea(Register dst, AddressLiteral adr); | |
1887 void lea(Address dst, AddressLiteral adr); | |
304 | 1888 void lea(Register dst, Address adr) { Assembler::lea(dst, adr); } |
1889 | |
1890 void leal32(Register dst, Address src) { leal(dst, src); } | |
1891 | |
1892 void test32(Register src1, AddressLiteral src2); | |
1893 | |
1894 void orptr(Register dst, Address src) { LP64_ONLY(orq(dst, src)) NOT_LP64(orl(dst, src)); } | |
1895 void orptr(Register dst, Register src) { LP64_ONLY(orq(dst, src)) NOT_LP64(orl(dst, src)); } | |
1896 void orptr(Register dst, int32_t src) { LP64_ONLY(orq(dst, src)) NOT_LP64(orl(dst, src)); } | |
1897 | |
1898 void testptr(Register src, int32_t imm32) { LP64_ONLY(testq(src, imm32)) NOT_LP64(testl(src, imm32)); } | |
1899 void testptr(Register src1, Register src2); | |
1900 | |
1901 void xorptr(Register dst, Register src) { LP64_ONLY(xorq(dst, src)) NOT_LP64(xorl(dst, src)); } | |
1902 void xorptr(Register dst, Address src) { LP64_ONLY(xorq(dst, src)) NOT_LP64(xorl(dst, src)); } | |
0 | 1903 |
1904 // Calls | |
1905 | |
1906 void call(Label& L, relocInfo::relocType rtype); | |
1907 void call(Register entry); | |
1908 | |
1909 // NOTE: this call tranfers to the effective address of entry NOT | |
1910 // the address contained by entry. This is because this is more natural | |
1911 // for jumps/calls. | |
1912 void call(AddressLiteral entry); | |
1913 | |
1914 // Jumps | |
1915 | |
1916 // NOTE: these jumps tranfer to the effective address of dst NOT | |
1917 // the address contained by dst. This is because this is more natural | |
1918 // for jumps/calls. | |
1919 void jump(AddressLiteral dst); | |
1920 void jump_cc(Condition cc, AddressLiteral dst); | |
1921 | |
1922 // 32bit can do a case table jump in one instruction but we no longer allow the base | |
1923 // to be installed in the Address class. This jump will tranfers to the address | |
1924 // contained in the location described by entry (not the address of entry) | |
1925 void jump(ArrayAddress entry); | |
1926 | |
1927 // Floating | |
1928 | |
1929 void andpd(XMMRegister dst, Address src) { Assembler::andpd(dst, src); } | |
1930 void andpd(XMMRegister dst, AddressLiteral src); | |
1931 | |
1932 void comiss(XMMRegister dst, Address src) { Assembler::comiss(dst, src); } | |
1933 void comiss(XMMRegister dst, AddressLiteral src); | |
1934 | |
1935 void comisd(XMMRegister dst, Address src) { Assembler::comisd(dst, src); } | |
1936 void comisd(XMMRegister dst, AddressLiteral src); | |
1937 | |
1938 void fldcw(Address src) { Assembler::fldcw(src); } | |
1939 void fldcw(AddressLiteral src); | |
1940 | |
1941 void fld_s(int index) { Assembler::fld_s(index); } | |
1942 void fld_s(Address src) { Assembler::fld_s(src); } | |
1943 void fld_s(AddressLiteral src); | |
1944 | |
1945 void fld_d(Address src) { Assembler::fld_d(src); } | |
1946 void fld_d(AddressLiteral src); | |
1947 | |
1948 void fld_x(Address src) { Assembler::fld_x(src); } | |
1949 void fld_x(AddressLiteral src); | |
1950 | |
1951 void ldmxcsr(Address src) { Assembler::ldmxcsr(src); } | |
1952 void ldmxcsr(AddressLiteral src); | |
1953 | |
304 | 1954 private: |
1955 // these are private because users should be doing movflt/movdbl | |
1956 | |
0 | 1957 void movss(Address dst, XMMRegister src) { Assembler::movss(dst, src); } |
1958 void movss(XMMRegister dst, XMMRegister src) { Assembler::movss(dst, src); } | |
1959 void movss(XMMRegister dst, Address src) { Assembler::movss(dst, src); } | |
1960 void movss(XMMRegister dst, AddressLiteral src); | |
1961 | |
304 | 1962 void movlpd(XMMRegister dst, Address src) {Assembler::movlpd(dst, src); } |
1963 void movlpd(XMMRegister dst, AddressLiteral src); | |
1964 | |
1965 public: | |
1966 | |
0 | 1967 void movsd(XMMRegister dst, XMMRegister src) { Assembler::movsd(dst, src); } |
1968 void movsd(Address dst, XMMRegister src) { Assembler::movsd(dst, src); } | |
1969 void movsd(XMMRegister dst, Address src) { Assembler::movsd(dst, src); } | |
1970 void movsd(XMMRegister dst, AddressLiteral src); | |
1971 | |
1972 void ucomiss(XMMRegister dst, XMMRegister src) { Assembler::ucomiss(dst, src); } | |
1973 void ucomiss(XMMRegister dst, Address src) { Assembler::ucomiss(dst, src); } | |
1974 void ucomiss(XMMRegister dst, AddressLiteral src); | |
1975 | |
1976 void ucomisd(XMMRegister dst, XMMRegister src) { Assembler::ucomisd(dst, src); } | |
1977 void ucomisd(XMMRegister dst, Address src) { Assembler::ucomisd(dst, src); } | |
1978 void ucomisd(XMMRegister dst, AddressLiteral src); | |
1979 | |
1980 // Bitwise Logical XOR of Packed Double-Precision Floating-Point Values | |
1981 void xorpd(XMMRegister dst, XMMRegister src) { Assembler::xorpd(dst, src); } | |
1982 void xorpd(XMMRegister dst, Address src) { Assembler::xorpd(dst, src); } | |
1983 void xorpd(XMMRegister dst, AddressLiteral src); | |
1984 | |
1985 // Bitwise Logical XOR of Packed Single-Precision Floating-Point Values | |
1986 void xorps(XMMRegister dst, XMMRegister src) { Assembler::xorps(dst, src); } | |
1987 void xorps(XMMRegister dst, Address src) { Assembler::xorps(dst, src); } | |
1988 void xorps(XMMRegister dst, AddressLiteral src); | |
1989 | |
1990 // Data | |
1991 | |
304 | 1992 void cmov(Condition cc, Register dst, Register src) { LP64_ONLY(cmovq(cc, dst, src)) NOT_LP64(cmovl(cc, dst, src)); } |
1993 | |
1994 void cmovptr(Condition cc, Register dst, Address src) { LP64_ONLY(cmovq(cc, dst, src)) NOT_LP64(cmovl(cc, dst, src)); } | |
1995 void cmovptr(Condition cc, Register dst, Register src) { LP64_ONLY(cmovq(cc, dst, src)) NOT_LP64(cmovl(cc, dst, src)); } | |
1996 | |
0 | 1997 void movoop(Register dst, jobject obj); |
1998 void movoop(Address dst, jobject obj); | |
1999 | |
2000 void movptr(ArrayAddress dst, Register src); | |
2001 // can this do an lea? | |
2002 void movptr(Register dst, ArrayAddress src); | |
2003 | |
304 | 2004 void movptr(Register dst, Address src); |
2005 | |
0 | 2006 void movptr(Register dst, AddressLiteral src); |
2007 | |
304 | 2008 void movptr(Register dst, intptr_t src); |
2009 void movptr(Register dst, Register src); | |
2010 void movptr(Address dst, intptr_t src); | |
2011 | |
2012 void movptr(Address dst, Register src); | |
2013 | |
2014 #ifdef _LP64 | |
2015 // Generally the next two are only used for moving NULL | |
2016 // Although there are situations in initializing the mark word where | |
2017 // they could be used. They are dangerous. | |
2018 | |
2019 // They only exist on LP64 so that int32_t and intptr_t are not the same | |
2020 // and we have ambiguous declarations. | |
2021 | |
2022 void movptr(Address dst, int32_t imm32); | |
2023 void movptr(Register dst, int32_t imm32); | |
2024 #endif // _LP64 | |
2025 | |
0 | 2026 // to avoid hiding movl |
2027 void mov32(AddressLiteral dst, Register src); | |
2028 void mov32(Register dst, AddressLiteral src); | |
304 | 2029 |
0 | 2030 // to avoid hiding movb |
2031 void movbyte(ArrayAddress dst, int src); | |
2032 | |
2033 // Can push value or effective address | |
2034 void pushptr(AddressLiteral src); | |
2035 | |
304 | 2036 void pushptr(Address src) { LP64_ONLY(pushq(src)) NOT_LP64(pushl(src)); } |
2037 void popptr(Address src) { LP64_ONLY(popq(src)) NOT_LP64(popl(src)); } | |
2038 | |
2039 void pushoop(jobject obj); | |
2040 | |
2041 // sign extend as need a l to ptr sized element | |
2042 void movl2ptr(Register dst, Address src) { LP64_ONLY(movslq(dst, src)) NOT_LP64(movl(dst, src)); } | |
2043 void movl2ptr(Register dst, Register src) { LP64_ONLY(movslq(dst, src)) NOT_LP64(if (dst != src) movl(dst, src)); } | |
2044 | |
2045 | |
0 | 2046 #undef VIRTUAL |
2047 | |
2048 }; | |
2049 | |
2050 /** | |
2051 * class SkipIfEqual: | |
2052 * | |
2053 * Instantiating this class will result in assembly code being output that will | |
2054 * jump around any code emitted between the creation of the instance and it's | |
2055 * automatic destruction at the end of a scope block, depending on the value of | |
2056 * the flag passed to the constructor, which will be checked at run-time. | |
2057 */ | |
2058 class SkipIfEqual { | |
2059 private: | |
2060 MacroAssembler* _masm; | |
2061 Label _label; | |
2062 | |
2063 public: | |
2064 SkipIfEqual(MacroAssembler*, const bool* flag_addr, bool value); | |
2065 ~SkipIfEqual(); | |
2066 }; | |
2067 | |
2068 #ifdef ASSERT | |
2069 inline bool AbstractAssembler::pd_check_instruction_mark() { return true; } | |
2070 #endif |