Mercurial > hg > graal-compiler
comparison src/cpu/sparc/vm/sparc.ad @ 0:a61af66fc99e jdk7-b24
Initial load
author | duke |
---|---|
date | Sat, 01 Dec 2007 00:00:00 +0000 |
parents | |
children | dee7a3f3dc9d |
comparison
equal
deleted
inserted
replaced
-1:000000000000 | 0:a61af66fc99e |
---|---|
1 // | |
2 // Copyright 1998-2007 Sun Microsystems, Inc. All Rights Reserved. | |
3 // DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. | |
4 // | |
5 // This code is free software; you can redistribute it and/or modify it | |
6 // under the terms of the GNU General Public License version 2 only, as | |
7 // published by the Free Software Foundation. | |
8 // | |
9 // This code is distributed in the hope that it will be useful, but WITHOUT | |
10 // ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
11 // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 // version 2 for more details (a copy is included in the LICENSE file that | |
13 // accompanied this code). | |
14 // | |
15 // You should have received a copy of the GNU General Public License version | |
16 // 2 along with this work; if not, write to the Free Software Foundation, | |
17 // Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
18 // | |
19 // Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, | |
20 // CA 95054 USA or visit www.sun.com if you need additional information or | |
21 // have any questions. | |
22 // | |
23 // | |
24 | |
25 // SPARC Architecture Description File | |
26 | |
27 //----------REGISTER DEFINITION BLOCK------------------------------------------ | |
28 // This information is used by the matcher and the register allocator to | |
29 // describe individual registers and classes of registers within the target | |
30 // archtecture. | |
31 register %{ | |
32 //----------Architecture Description Register Definitions---------------------- | |
33 // General Registers | |
34 // "reg_def" name ( register save type, C convention save type, | |
35 // ideal register type, encoding, vm name ); | |
36 // Register Save Types: | |
37 // | |
38 // NS = No-Save: The register allocator assumes that these registers | |
39 // can be used without saving upon entry to the method, & | |
40 // that they do not need to be saved at call sites. | |
41 // | |
42 // SOC = Save-On-Call: The register allocator assumes that these registers | |
43 // can be used without saving upon entry to the method, | |
44 // but that they must be saved at call sites. | |
45 // | |
46 // SOE = Save-On-Entry: The register allocator assumes that these registers | |
47 // must be saved before using them upon entry to the | |
48 // method, but they do not need to be saved at call | |
49 // sites. | |
50 // | |
51 // AS = Always-Save: The register allocator assumes that these registers | |
52 // must be saved before using them upon entry to the | |
53 // method, & that they must be saved at call sites. | |
54 // | |
55 // Ideal Register Type is used to determine how to save & restore a | |
56 // register. Op_RegI will get spilled with LoadI/StoreI, Op_RegP will get | |
57 // spilled with LoadP/StoreP. If the register supports both, use Op_RegI. | |
58 // | |
59 // The encoding number is the actual bit-pattern placed into the opcodes. | |
60 | |
61 | |
62 // ---------------------------- | |
63 // Integer/Long Registers | |
64 // ---------------------------- | |
65 | |
66 // Need to expose the hi/lo aspect of 64-bit registers | |
67 // This register set is used for both the 64-bit build and | |
68 // the 32-bit build with 1-register longs. | |
69 | |
70 // Global Registers 0-7 | |
71 reg_def R_G0H( NS, NS, Op_RegI,128, G0->as_VMReg()->next()); | |
72 reg_def R_G0 ( NS, NS, Op_RegI, 0, G0->as_VMReg()); | |
73 reg_def R_G1H(SOC, SOC, Op_RegI,129, G1->as_VMReg()->next()); | |
74 reg_def R_G1 (SOC, SOC, Op_RegI, 1, G1->as_VMReg()); | |
75 reg_def R_G2H( NS, NS, Op_RegI,130, G2->as_VMReg()->next()); | |
76 reg_def R_G2 ( NS, NS, Op_RegI, 2, G2->as_VMReg()); | |
77 reg_def R_G3H(SOC, SOC, Op_RegI,131, G3->as_VMReg()->next()); | |
78 reg_def R_G3 (SOC, SOC, Op_RegI, 3, G3->as_VMReg()); | |
79 reg_def R_G4H(SOC, SOC, Op_RegI,132, G4->as_VMReg()->next()); | |
80 reg_def R_G4 (SOC, SOC, Op_RegI, 4, G4->as_VMReg()); | |
81 reg_def R_G5H(SOC, SOC, Op_RegI,133, G5->as_VMReg()->next()); | |
82 reg_def R_G5 (SOC, SOC, Op_RegI, 5, G5->as_VMReg()); | |
83 reg_def R_G6H( NS, NS, Op_RegI,134, G6->as_VMReg()->next()); | |
84 reg_def R_G6 ( NS, NS, Op_RegI, 6, G6->as_VMReg()); | |
85 reg_def R_G7H( NS, NS, Op_RegI,135, G7->as_VMReg()->next()); | |
86 reg_def R_G7 ( NS, NS, Op_RegI, 7, G7->as_VMReg()); | |
87 | |
88 // Output Registers 0-7 | |
89 reg_def R_O0H(SOC, SOC, Op_RegI,136, O0->as_VMReg()->next()); | |
90 reg_def R_O0 (SOC, SOC, Op_RegI, 8, O0->as_VMReg()); | |
91 reg_def R_O1H(SOC, SOC, Op_RegI,137, O1->as_VMReg()->next()); | |
92 reg_def R_O1 (SOC, SOC, Op_RegI, 9, O1->as_VMReg()); | |
93 reg_def R_O2H(SOC, SOC, Op_RegI,138, O2->as_VMReg()->next()); | |
94 reg_def R_O2 (SOC, SOC, Op_RegI, 10, O2->as_VMReg()); | |
95 reg_def R_O3H(SOC, SOC, Op_RegI,139, O3->as_VMReg()->next()); | |
96 reg_def R_O3 (SOC, SOC, Op_RegI, 11, O3->as_VMReg()); | |
97 reg_def R_O4H(SOC, SOC, Op_RegI,140, O4->as_VMReg()->next()); | |
98 reg_def R_O4 (SOC, SOC, Op_RegI, 12, O4->as_VMReg()); | |
99 reg_def R_O5H(SOC, SOC, Op_RegI,141, O5->as_VMReg()->next()); | |
100 reg_def R_O5 (SOC, SOC, Op_RegI, 13, O5->as_VMReg()); | |
101 reg_def R_SPH( NS, NS, Op_RegI,142, SP->as_VMReg()->next()); | |
102 reg_def R_SP ( NS, NS, Op_RegI, 14, SP->as_VMReg()); | |
103 reg_def R_O7H(SOC, SOC, Op_RegI,143, O7->as_VMReg()->next()); | |
104 reg_def R_O7 (SOC, SOC, Op_RegI, 15, O7->as_VMReg()); | |
105 | |
106 // Local Registers 0-7 | |
107 reg_def R_L0H( NS, NS, Op_RegI,144, L0->as_VMReg()->next()); | |
108 reg_def R_L0 ( NS, NS, Op_RegI, 16, L0->as_VMReg()); | |
109 reg_def R_L1H( NS, NS, Op_RegI,145, L1->as_VMReg()->next()); | |
110 reg_def R_L1 ( NS, NS, Op_RegI, 17, L1->as_VMReg()); | |
111 reg_def R_L2H( NS, NS, Op_RegI,146, L2->as_VMReg()->next()); | |
112 reg_def R_L2 ( NS, NS, Op_RegI, 18, L2->as_VMReg()); | |
113 reg_def R_L3H( NS, NS, Op_RegI,147, L3->as_VMReg()->next()); | |
114 reg_def R_L3 ( NS, NS, Op_RegI, 19, L3->as_VMReg()); | |
115 reg_def R_L4H( NS, NS, Op_RegI,148, L4->as_VMReg()->next()); | |
116 reg_def R_L4 ( NS, NS, Op_RegI, 20, L4->as_VMReg()); | |
117 reg_def R_L5H( NS, NS, Op_RegI,149, L5->as_VMReg()->next()); | |
118 reg_def R_L5 ( NS, NS, Op_RegI, 21, L5->as_VMReg()); | |
119 reg_def R_L6H( NS, NS, Op_RegI,150, L6->as_VMReg()->next()); | |
120 reg_def R_L6 ( NS, NS, Op_RegI, 22, L6->as_VMReg()); | |
121 reg_def R_L7H( NS, NS, Op_RegI,151, L7->as_VMReg()->next()); | |
122 reg_def R_L7 ( NS, NS, Op_RegI, 23, L7->as_VMReg()); | |
123 | |
124 // Input Registers 0-7 | |
125 reg_def R_I0H( NS, NS, Op_RegI,152, I0->as_VMReg()->next()); | |
126 reg_def R_I0 ( NS, NS, Op_RegI, 24, I0->as_VMReg()); | |
127 reg_def R_I1H( NS, NS, Op_RegI,153, I1->as_VMReg()->next()); | |
128 reg_def R_I1 ( NS, NS, Op_RegI, 25, I1->as_VMReg()); | |
129 reg_def R_I2H( NS, NS, Op_RegI,154, I2->as_VMReg()->next()); | |
130 reg_def R_I2 ( NS, NS, Op_RegI, 26, I2->as_VMReg()); | |
131 reg_def R_I3H( NS, NS, Op_RegI,155, I3->as_VMReg()->next()); | |
132 reg_def R_I3 ( NS, NS, Op_RegI, 27, I3->as_VMReg()); | |
133 reg_def R_I4H( NS, NS, Op_RegI,156, I4->as_VMReg()->next()); | |
134 reg_def R_I4 ( NS, NS, Op_RegI, 28, I4->as_VMReg()); | |
135 reg_def R_I5H( NS, NS, Op_RegI,157, I5->as_VMReg()->next()); | |
136 reg_def R_I5 ( NS, NS, Op_RegI, 29, I5->as_VMReg()); | |
137 reg_def R_FPH( NS, NS, Op_RegI,158, FP->as_VMReg()->next()); | |
138 reg_def R_FP ( NS, NS, Op_RegI, 30, FP->as_VMReg()); | |
139 reg_def R_I7H( NS, NS, Op_RegI,159, I7->as_VMReg()->next()); | |
140 reg_def R_I7 ( NS, NS, Op_RegI, 31, I7->as_VMReg()); | |
141 | |
142 // ---------------------------- | |
143 // Float/Double Registers | |
144 // ---------------------------- | |
145 | |
146 // Float Registers | |
147 reg_def R_F0 ( SOC, SOC, Op_RegF, 0, F0->as_VMReg()); | |
148 reg_def R_F1 ( SOC, SOC, Op_RegF, 1, F1->as_VMReg()); | |
149 reg_def R_F2 ( SOC, SOC, Op_RegF, 2, F2->as_VMReg()); | |
150 reg_def R_F3 ( SOC, SOC, Op_RegF, 3, F3->as_VMReg()); | |
151 reg_def R_F4 ( SOC, SOC, Op_RegF, 4, F4->as_VMReg()); | |
152 reg_def R_F5 ( SOC, SOC, Op_RegF, 5, F5->as_VMReg()); | |
153 reg_def R_F6 ( SOC, SOC, Op_RegF, 6, F6->as_VMReg()); | |
154 reg_def R_F7 ( SOC, SOC, Op_RegF, 7, F7->as_VMReg()); | |
155 reg_def R_F8 ( SOC, SOC, Op_RegF, 8, F8->as_VMReg()); | |
156 reg_def R_F9 ( SOC, SOC, Op_RegF, 9, F9->as_VMReg()); | |
157 reg_def R_F10( SOC, SOC, Op_RegF, 10, F10->as_VMReg()); | |
158 reg_def R_F11( SOC, SOC, Op_RegF, 11, F11->as_VMReg()); | |
159 reg_def R_F12( SOC, SOC, Op_RegF, 12, F12->as_VMReg()); | |
160 reg_def R_F13( SOC, SOC, Op_RegF, 13, F13->as_VMReg()); | |
161 reg_def R_F14( SOC, SOC, Op_RegF, 14, F14->as_VMReg()); | |
162 reg_def R_F15( SOC, SOC, Op_RegF, 15, F15->as_VMReg()); | |
163 reg_def R_F16( SOC, SOC, Op_RegF, 16, F16->as_VMReg()); | |
164 reg_def R_F17( SOC, SOC, Op_RegF, 17, F17->as_VMReg()); | |
165 reg_def R_F18( SOC, SOC, Op_RegF, 18, F18->as_VMReg()); | |
166 reg_def R_F19( SOC, SOC, Op_RegF, 19, F19->as_VMReg()); | |
167 reg_def R_F20( SOC, SOC, Op_RegF, 20, F20->as_VMReg()); | |
168 reg_def R_F21( SOC, SOC, Op_RegF, 21, F21->as_VMReg()); | |
169 reg_def R_F22( SOC, SOC, Op_RegF, 22, F22->as_VMReg()); | |
170 reg_def R_F23( SOC, SOC, Op_RegF, 23, F23->as_VMReg()); | |
171 reg_def R_F24( SOC, SOC, Op_RegF, 24, F24->as_VMReg()); | |
172 reg_def R_F25( SOC, SOC, Op_RegF, 25, F25->as_VMReg()); | |
173 reg_def R_F26( SOC, SOC, Op_RegF, 26, F26->as_VMReg()); | |
174 reg_def R_F27( SOC, SOC, Op_RegF, 27, F27->as_VMReg()); | |
175 reg_def R_F28( SOC, SOC, Op_RegF, 28, F28->as_VMReg()); | |
176 reg_def R_F29( SOC, SOC, Op_RegF, 29, F29->as_VMReg()); | |
177 reg_def R_F30( SOC, SOC, Op_RegF, 30, F30->as_VMReg()); | |
178 reg_def R_F31( SOC, SOC, Op_RegF, 31, F31->as_VMReg()); | |
179 | |
180 // Double Registers | |
181 // The rules of ADL require that double registers be defined in pairs. | |
182 // Each pair must be two 32-bit values, but not necessarily a pair of | |
183 // single float registers. In each pair, ADLC-assigned register numbers | |
184 // must be adjacent, with the lower number even. Finally, when the | |
185 // CPU stores such a register pair to memory, the word associated with | |
186 // the lower ADLC-assigned number must be stored to the lower address. | |
187 | |
188 // These definitions specify the actual bit encodings of the sparc | |
189 // double fp register numbers. FloatRegisterImpl in register_sparc.hpp | |
190 // wants 0-63, so we have to convert every time we want to use fp regs | |
191 // with the macroassembler, using reg_to_DoubleFloatRegister_object(). | |
192 // 255 is a flag meaning 'dont go here'. | |
193 // I believe we can't handle callee-save doubles D32 and up until | |
194 // the place in the sparc stack crawler that asserts on the 255 is | |
195 // fixed up. | |
196 reg_def R_D32x(SOC, SOC, Op_RegD,255, F32->as_VMReg()); | |
197 reg_def R_D32 (SOC, SOC, Op_RegD, 1, F32->as_VMReg()->next()); | |
198 reg_def R_D34x(SOC, SOC, Op_RegD,255, F34->as_VMReg()); | |
199 reg_def R_D34 (SOC, SOC, Op_RegD, 3, F34->as_VMReg()->next()); | |
200 reg_def R_D36x(SOC, SOC, Op_RegD,255, F36->as_VMReg()); | |
201 reg_def R_D36 (SOC, SOC, Op_RegD, 5, F36->as_VMReg()->next()); | |
202 reg_def R_D38x(SOC, SOC, Op_RegD,255, F38->as_VMReg()); | |
203 reg_def R_D38 (SOC, SOC, Op_RegD, 7, F38->as_VMReg()->next()); | |
204 reg_def R_D40x(SOC, SOC, Op_RegD,255, F40->as_VMReg()); | |
205 reg_def R_D40 (SOC, SOC, Op_RegD, 9, F40->as_VMReg()->next()); | |
206 reg_def R_D42x(SOC, SOC, Op_RegD,255, F42->as_VMReg()); | |
207 reg_def R_D42 (SOC, SOC, Op_RegD, 11, F42->as_VMReg()->next()); | |
208 reg_def R_D44x(SOC, SOC, Op_RegD,255, F44->as_VMReg()); | |
209 reg_def R_D44 (SOC, SOC, Op_RegD, 13, F44->as_VMReg()->next()); | |
210 reg_def R_D46x(SOC, SOC, Op_RegD,255, F46->as_VMReg()); | |
211 reg_def R_D46 (SOC, SOC, Op_RegD, 15, F46->as_VMReg()->next()); | |
212 reg_def R_D48x(SOC, SOC, Op_RegD,255, F48->as_VMReg()); | |
213 reg_def R_D48 (SOC, SOC, Op_RegD, 17, F48->as_VMReg()->next()); | |
214 reg_def R_D50x(SOC, SOC, Op_RegD,255, F50->as_VMReg()); | |
215 reg_def R_D50 (SOC, SOC, Op_RegD, 19, F50->as_VMReg()->next()); | |
216 reg_def R_D52x(SOC, SOC, Op_RegD,255, F52->as_VMReg()); | |
217 reg_def R_D52 (SOC, SOC, Op_RegD, 21, F52->as_VMReg()->next()); | |
218 reg_def R_D54x(SOC, SOC, Op_RegD,255, F54->as_VMReg()); | |
219 reg_def R_D54 (SOC, SOC, Op_RegD, 23, F54->as_VMReg()->next()); | |
220 reg_def R_D56x(SOC, SOC, Op_RegD,255, F56->as_VMReg()); | |
221 reg_def R_D56 (SOC, SOC, Op_RegD, 25, F56->as_VMReg()->next()); | |
222 reg_def R_D58x(SOC, SOC, Op_RegD,255, F58->as_VMReg()); | |
223 reg_def R_D58 (SOC, SOC, Op_RegD, 27, F58->as_VMReg()->next()); | |
224 reg_def R_D60x(SOC, SOC, Op_RegD,255, F60->as_VMReg()); | |
225 reg_def R_D60 (SOC, SOC, Op_RegD, 29, F60->as_VMReg()->next()); | |
226 reg_def R_D62x(SOC, SOC, Op_RegD,255, F62->as_VMReg()); | |
227 reg_def R_D62 (SOC, SOC, Op_RegD, 31, F62->as_VMReg()->next()); | |
228 | |
229 | |
230 // ---------------------------- | |
231 // Special Registers | |
232 // Condition Codes Flag Registers | |
233 // I tried to break out ICC and XCC but it's not very pretty. | |
234 // Every Sparc instruction which defs/kills one also kills the other. | |
235 // Hence every compare instruction which defs one kind of flags ends | |
236 // up needing a kill of the other. | |
237 reg_def CCR (SOC, SOC, Op_RegFlags, 0, VMRegImpl::Bad()); | |
238 | |
239 reg_def FCC0(SOC, SOC, Op_RegFlags, 0, VMRegImpl::Bad()); | |
240 reg_def FCC1(SOC, SOC, Op_RegFlags, 1, VMRegImpl::Bad()); | |
241 reg_def FCC2(SOC, SOC, Op_RegFlags, 2, VMRegImpl::Bad()); | |
242 reg_def FCC3(SOC, SOC, Op_RegFlags, 3, VMRegImpl::Bad()); | |
243 | |
244 // ---------------------------- | |
245 // Specify the enum values for the registers. These enums are only used by the | |
246 // OptoReg "class". We can convert these enum values at will to VMReg when needed | |
247 // for visibility to the rest of the vm. The order of this enum influences the | |
248 // register allocator so having the freedom to set this order and not be stuck | |
249 // with the order that is natural for the rest of the vm is worth it. | |
250 alloc_class chunk0( | |
251 R_L0,R_L0H, R_L1,R_L1H, R_L2,R_L2H, R_L3,R_L3H, R_L4,R_L4H, R_L5,R_L5H, R_L6,R_L6H, R_L7,R_L7H, | |
252 R_G0,R_G0H, R_G1,R_G1H, R_G2,R_G2H, R_G3,R_G3H, R_G4,R_G4H, R_G5,R_G5H, R_G6,R_G6H, R_G7,R_G7H, | |
253 R_O7,R_O7H, R_SP,R_SPH, R_O0,R_O0H, R_O1,R_O1H, R_O2,R_O2H, R_O3,R_O3H, R_O4,R_O4H, R_O5,R_O5H, | |
254 R_I0,R_I0H, R_I1,R_I1H, R_I2,R_I2H, R_I3,R_I3H, R_I4,R_I4H, R_I5,R_I5H, R_FP,R_FPH, R_I7,R_I7H); | |
255 | |
256 // Note that a register is not allocatable unless it is also mentioned | |
257 // in a widely-used reg_class below. Thus, R_G7 and R_G0 are outside i_reg. | |
258 | |
259 alloc_class chunk1( | |
260 // The first registers listed here are those most likely to be used | |
261 // as temporaries. We move F0..F7 away from the front of the list, | |
262 // to reduce the likelihood of interferences with parameters and | |
263 // return values. Likewise, we avoid using F0/F1 for parameters, | |
264 // since they are used for return values. | |
265 // This FPU fine-tuning is worth about 1% on the SPEC geomean. | |
266 R_F8 ,R_F9 ,R_F10,R_F11,R_F12,R_F13,R_F14,R_F15, | |
267 R_F16,R_F17,R_F18,R_F19,R_F20,R_F21,R_F22,R_F23, | |
268 R_F24,R_F25,R_F26,R_F27,R_F28,R_F29,R_F30,R_F31, | |
269 R_F0 ,R_F1 ,R_F2 ,R_F3 ,R_F4 ,R_F5 ,R_F6 ,R_F7 , // used for arguments and return values | |
270 R_D32,R_D32x,R_D34,R_D34x,R_D36,R_D36x,R_D38,R_D38x, | |
271 R_D40,R_D40x,R_D42,R_D42x,R_D44,R_D44x,R_D46,R_D46x, | |
272 R_D48,R_D48x,R_D50,R_D50x,R_D52,R_D52x,R_D54,R_D54x, | |
273 R_D56,R_D56x,R_D58,R_D58x,R_D60,R_D60x,R_D62,R_D62x); | |
274 | |
275 alloc_class chunk2(CCR, FCC0, FCC1, FCC2, FCC3); | |
276 | |
277 //----------Architecture Description Register Classes-------------------------- | |
278 // Several register classes are automatically defined based upon information in | |
279 // this architecture description. | |
280 // 1) reg_class inline_cache_reg ( as defined in frame section ) | |
281 // 2) reg_class interpreter_method_oop_reg ( as defined in frame section ) | |
282 // 3) reg_class stack_slots( /* one chunk of stack-based "registers" */ ) | |
283 // | |
284 | |
285 // G0 is not included in integer class since it has special meaning. | |
286 reg_class g0_reg(R_G0); | |
287 | |
288 // ---------------------------- | |
289 // Integer Register Classes | |
290 // ---------------------------- | |
291 // Exclusions from i_reg: | |
292 // R_G0: hardwired zero | |
293 // R_G2: reserved by HotSpot to the TLS register (invariant within Java) | |
294 // R_G6: reserved by Solaris ABI to tools | |
295 // R_G7: reserved by Solaris ABI to libthread | |
296 // R_O7: Used as a temp in many encodings | |
297 reg_class int_reg(R_G1,R_G3,R_G4,R_G5,R_O0,R_O1,R_O2,R_O3,R_O4,R_O5,R_L0,R_L1,R_L2,R_L3,R_L4,R_L5,R_L6,R_L7,R_I0,R_I1,R_I2,R_I3,R_I4,R_I5); | |
298 | |
299 // Class for all integer registers, except the G registers. This is used for | |
300 // encodings which use G registers as temps. The regular inputs to such | |
301 // instructions use a "notemp_" prefix, as a hack to ensure that the allocator | |
302 // will not put an input into a temp register. | |
303 reg_class notemp_int_reg(R_O0,R_O1,R_O2,R_O3,R_O4,R_O5,R_L0,R_L1,R_L2,R_L3,R_L4,R_L5,R_L6,R_L7,R_I0,R_I1,R_I2,R_I3,R_I4,R_I5); | |
304 | |
305 reg_class g1_regI(R_G1); | |
306 reg_class g3_regI(R_G3); | |
307 reg_class g4_regI(R_G4); | |
308 reg_class o0_regI(R_O0); | |
309 reg_class o7_regI(R_O7); | |
310 | |
311 // ---------------------------- | |
312 // Pointer Register Classes | |
313 // ---------------------------- | |
314 #ifdef _LP64 | |
315 // 64-bit build means 64-bit pointers means hi/lo pairs | |
316 reg_class ptr_reg( R_G1H,R_G1, R_G3H,R_G3, R_G4H,R_G4, R_G5H,R_G5, | |
317 R_O0H,R_O0, R_O1H,R_O1, R_O2H,R_O2, R_O3H,R_O3, R_O4H,R_O4, R_O5H,R_O5, | |
318 R_L0H,R_L0, R_L1H,R_L1, R_L2H,R_L2, R_L3H,R_L3, R_L4H,R_L4, R_L5H,R_L5, R_L6H,R_L6, R_L7H,R_L7, | |
319 R_I0H,R_I0, R_I1H,R_I1, R_I2H,R_I2, R_I3H,R_I3, R_I4H,R_I4, R_I5H,R_I5 ); | |
320 // Lock encodings use G3 and G4 internally | |
321 reg_class lock_ptr_reg( R_G1H,R_G1, R_G5H,R_G5, | |
322 R_O0H,R_O0, R_O1H,R_O1, R_O2H,R_O2, R_O3H,R_O3, R_O4H,R_O4, R_O5H,R_O5, | |
323 R_L0H,R_L0, R_L1H,R_L1, R_L2H,R_L2, R_L3H,R_L3, R_L4H,R_L4, R_L5H,R_L5, R_L6H,R_L6, R_L7H,R_L7, | |
324 R_I0H,R_I0, R_I1H,R_I1, R_I2H,R_I2, R_I3H,R_I3, R_I4H,R_I4, R_I5H,R_I5 ); | |
325 // Special class for storeP instructions, which can store SP or RPC to TLS. | |
326 // It is also used for memory addressing, allowing direct TLS addressing. | |
327 reg_class sp_ptr_reg( R_G1H,R_G1, R_G2H,R_G2, R_G3H,R_G3, R_G4H,R_G4, R_G5H,R_G5, | |
328 R_O0H,R_O0, R_O1H,R_O1, R_O2H,R_O2, R_O3H,R_O3, R_O4H,R_O4, R_O5H,R_O5, R_SPH,R_SP, | |
329 R_L0H,R_L0, R_L1H,R_L1, R_L2H,R_L2, R_L3H,R_L3, R_L4H,R_L4, R_L5H,R_L5, R_L6H,R_L6, R_L7H,R_L7, | |
330 R_I0H,R_I0, R_I1H,R_I1, R_I2H,R_I2, R_I3H,R_I3, R_I4H,R_I4, R_I5H,R_I5, R_FPH,R_FP ); | |
331 // R_L7 is the lowest-priority callee-save (i.e., NS) register | |
332 // We use it to save R_G2 across calls out of Java. | |
333 reg_class l7_regP(R_L7H,R_L7); | |
334 | |
335 // Other special pointer regs | |
336 reg_class g1_regP(R_G1H,R_G1); | |
337 reg_class g2_regP(R_G2H,R_G2); | |
338 reg_class g3_regP(R_G3H,R_G3); | |
339 reg_class g4_regP(R_G4H,R_G4); | |
340 reg_class g5_regP(R_G5H,R_G5); | |
341 reg_class i0_regP(R_I0H,R_I0); | |
342 reg_class o0_regP(R_O0H,R_O0); | |
343 reg_class o1_regP(R_O1H,R_O1); | |
344 reg_class o2_regP(R_O2H,R_O2); | |
345 reg_class o7_regP(R_O7H,R_O7); | |
346 | |
347 #else // _LP64 | |
348 // 32-bit build means 32-bit pointers means 1 register. | |
349 reg_class ptr_reg( R_G1, R_G3,R_G4,R_G5, | |
350 R_O0,R_O1,R_O2,R_O3,R_O4,R_O5, | |
351 R_L0,R_L1,R_L2,R_L3,R_L4,R_L5,R_L6,R_L7, | |
352 R_I0,R_I1,R_I2,R_I3,R_I4,R_I5); | |
353 // Lock encodings use G3 and G4 internally | |
354 reg_class lock_ptr_reg(R_G1, R_G5, | |
355 R_O0,R_O1,R_O2,R_O3,R_O4,R_O5, | |
356 R_L0,R_L1,R_L2,R_L3,R_L4,R_L5,R_L6,R_L7, | |
357 R_I0,R_I1,R_I2,R_I3,R_I4,R_I5); | |
358 // Special class for storeP instructions, which can store SP or RPC to TLS. | |
359 // It is also used for memory addressing, allowing direct TLS addressing. | |
360 reg_class sp_ptr_reg( R_G1,R_G2,R_G3,R_G4,R_G5, | |
361 R_O0,R_O1,R_O2,R_O3,R_O4,R_O5,R_SP, | |
362 R_L0,R_L1,R_L2,R_L3,R_L4,R_L5,R_L6,R_L7, | |
363 R_I0,R_I1,R_I2,R_I3,R_I4,R_I5,R_FP); | |
364 // R_L7 is the lowest-priority callee-save (i.e., NS) register | |
365 // We use it to save R_G2 across calls out of Java. | |
366 reg_class l7_regP(R_L7); | |
367 | |
368 // Other special pointer regs | |
369 reg_class g1_regP(R_G1); | |
370 reg_class g2_regP(R_G2); | |
371 reg_class g3_regP(R_G3); | |
372 reg_class g4_regP(R_G4); | |
373 reg_class g5_regP(R_G5); | |
374 reg_class i0_regP(R_I0); | |
375 reg_class o0_regP(R_O0); | |
376 reg_class o1_regP(R_O1); | |
377 reg_class o2_regP(R_O2); | |
378 reg_class o7_regP(R_O7); | |
379 #endif // _LP64 | |
380 | |
381 | |
382 // ---------------------------- | |
383 // Long Register Classes | |
384 // ---------------------------- | |
385 // Longs in 1 register. Aligned adjacent hi/lo pairs. | |
386 // Note: O7 is never in this class; it is sometimes used as an encoding temp. | |
387 reg_class long_reg( R_G1H,R_G1, R_G3H,R_G3, R_G4H,R_G4, R_G5H,R_G5 | |
388 ,R_O0H,R_O0, R_O1H,R_O1, R_O2H,R_O2, R_O3H,R_O3, R_O4H,R_O4, R_O5H,R_O5 | |
389 #ifdef _LP64 | |
390 // 64-bit, longs in 1 register: use all 64-bit integer registers | |
391 // 32-bit, longs in 1 register: cannot use I's and L's. Restrict to O's and G's. | |
392 ,R_L0H,R_L0, R_L1H,R_L1, R_L2H,R_L2, R_L3H,R_L3, R_L4H,R_L4, R_L5H,R_L5, R_L6H,R_L6, R_L7H,R_L7 | |
393 ,R_I0H,R_I0, R_I1H,R_I1, R_I2H,R_I2, R_I3H,R_I3, R_I4H,R_I4, R_I5H,R_I5 | |
394 #endif // _LP64 | |
395 ); | |
396 | |
397 reg_class g1_regL(R_G1H,R_G1); | |
398 reg_class o2_regL(R_O2H,R_O2); | |
399 reg_class o7_regL(R_O7H,R_O7); | |
400 | |
401 // ---------------------------- | |
402 // Special Class for Condition Code Flags Register | |
403 reg_class int_flags(CCR); | |
404 reg_class float_flags(FCC0,FCC1,FCC2,FCC3); | |
405 reg_class float_flag0(FCC0); | |
406 | |
407 | |
408 // ---------------------------- | |
409 // Float Point Register Classes | |
410 // ---------------------------- | |
411 // Skip F30/F31, they are reserved for mem-mem copies | |
412 reg_class sflt_reg(R_F0,R_F1,R_F2,R_F3,R_F4,R_F5,R_F6,R_F7,R_F8,R_F9,R_F10,R_F11,R_F12,R_F13,R_F14,R_F15,R_F16,R_F17,R_F18,R_F19,R_F20,R_F21,R_F22,R_F23,R_F24,R_F25,R_F26,R_F27,R_F28,R_F29); | |
413 | |
414 // Paired floating point registers--they show up in the same order as the floats, | |
415 // but they are used with the "Op_RegD" type, and always occur in even/odd pairs. | |
416 reg_class dflt_reg(R_F0, R_F1, R_F2, R_F3, R_F4, R_F5, R_F6, R_F7, R_F8, R_F9, R_F10,R_F11,R_F12,R_F13,R_F14,R_F15, | |
417 R_F16,R_F17,R_F18,R_F19,R_F20,R_F21,R_F22,R_F23,R_F24,R_F25,R_F26,R_F27,R_F28,R_F29, | |
418 /* Use extra V9 double registers; this AD file does not support V8 */ | |
419 R_D32,R_D32x,R_D34,R_D34x,R_D36,R_D36x,R_D38,R_D38x,R_D40,R_D40x,R_D42,R_D42x,R_D44,R_D44x,R_D46,R_D46x, | |
420 R_D48,R_D48x,R_D50,R_D50x,R_D52,R_D52x,R_D54,R_D54x,R_D56,R_D56x,R_D58,R_D58x,R_D60,R_D60x,R_D62,R_D62x | |
421 ); | |
422 | |
423 // Paired floating point registers--they show up in the same order as the floats, | |
424 // but they are used with the "Op_RegD" type, and always occur in even/odd pairs. | |
425 // This class is usable for mis-aligned loads as happen in I2C adapters. | |
426 reg_class dflt_low_reg(R_F0, R_F1, R_F2, R_F3, R_F4, R_F5, R_F6, R_F7, R_F8, R_F9, R_F10,R_F11,R_F12,R_F13,R_F14,R_F15, | |
427 R_F16,R_F17,R_F18,R_F19,R_F20,R_F21,R_F22,R_F23,R_F24,R_F25,R_F26,R_F27,R_F28,R_F29,R_F30,R_F31 ); | |
428 %} | |
429 | |
430 //----------DEFINITION BLOCK--------------------------------------------------- | |
431 // Define name --> value mappings to inform the ADLC of an integer valued name | |
432 // Current support includes integer values in the range [0, 0x7FFFFFFF] | |
433 // Format: | |
434 // int_def <name> ( <int_value>, <expression>); | |
435 // Generated Code in ad_<arch>.hpp | |
436 // #define <name> (<expression>) | |
437 // // value == <int_value> | |
438 // Generated code in ad_<arch>.cpp adlc_verification() | |
439 // assert( <name> == <int_value>, "Expect (<expression>) to equal <int_value>"); | |
440 // | |
441 definitions %{ | |
442 // The default cost (of an ALU instruction). | |
443 int_def DEFAULT_COST ( 100, 100); | |
444 int_def HUGE_COST (1000000, 1000000); | |
445 | |
446 // Memory refs are twice as expensive as run-of-the-mill. | |
447 int_def MEMORY_REF_COST ( 200, DEFAULT_COST * 2); | |
448 | |
449 // Branches are even more expensive. | |
450 int_def BRANCH_COST ( 300, DEFAULT_COST * 3); | |
451 int_def CALL_COST ( 300, DEFAULT_COST * 3); | |
452 %} | |
453 | |
454 | |
455 //----------SOURCE BLOCK------------------------------------------------------- | |
456 // This is a block of C++ code which provides values, functions, and | |
457 // definitions necessary in the rest of the architecture description | |
458 source_hpp %{ | |
459 // Must be visible to the DFA in dfa_sparc.cpp | |
460 extern bool can_branch_register( Node *bol, Node *cmp ); | |
461 | |
462 // Macros to extract hi & lo halves from a long pair. | |
463 // G0 is not part of any long pair, so assert on that. | |
464 // Prevents accidently using G1 instead of G0. | |
465 #define LONG_HI_REG(x) (x) | |
466 #define LONG_LO_REG(x) (x) | |
467 | |
468 %} | |
469 | |
470 source %{ | |
471 #define __ _masm. | |
472 | |
473 // tertiary op of a LoadP or StoreP encoding | |
474 #define REGP_OP true | |
475 | |
476 static FloatRegister reg_to_SingleFloatRegister_object(int register_encoding); | |
477 static FloatRegister reg_to_DoubleFloatRegister_object(int register_encoding); | |
478 static Register reg_to_register_object(int register_encoding); | |
479 | |
480 // Used by the DFA in dfa_sparc.cpp. | |
481 // Check for being able to use a V9 branch-on-register. Requires a | |
482 // compare-vs-zero, equal/not-equal, of a value which was zero- or sign- | |
483 // extended. Doesn't work following an integer ADD, for example, because of | |
484 // overflow (-1 incremented yields 0 plus a carry in the high-order word). On | |
485 // 32-bit V9 systems, interrupts currently blow away the high-order 32 bits and | |
486 // replace them with zero, which could become sign-extension in a different OS | |
487 // release. There's no obvious reason why an interrupt will ever fill these | |
488 // bits with non-zero junk (the registers are reloaded with standard LD | |
489 // instructions which either zero-fill or sign-fill). | |
490 bool can_branch_register( Node *bol, Node *cmp ) { | |
491 if( !BranchOnRegister ) return false; | |
492 #ifdef _LP64 | |
493 if( cmp->Opcode() == Op_CmpP ) | |
494 return true; // No problems with pointer compares | |
495 #endif | |
496 if( cmp->Opcode() == Op_CmpL ) | |
497 return true; // No problems with long compares | |
498 | |
499 if( !SparcV9RegsHiBitsZero ) return false; | |
500 if( bol->as_Bool()->_test._test != BoolTest::ne && | |
501 bol->as_Bool()->_test._test != BoolTest::eq ) | |
502 return false; | |
503 | |
504 // Check for comparing against a 'safe' value. Any operation which | |
505 // clears out the high word is safe. Thus, loads and certain shifts | |
506 // are safe, as are non-negative constants. Any operation which | |
507 // preserves zero bits in the high word is safe as long as each of its | |
508 // inputs are safe. Thus, phis and bitwise booleans are safe if their | |
509 // inputs are safe. At present, the only important case to recognize | |
510 // seems to be loads. Constants should fold away, and shifts & | |
511 // logicals can use the 'cc' forms. | |
512 Node *x = cmp->in(1); | |
513 if( x->is_Load() ) return true; | |
514 if( x->is_Phi() ) { | |
515 for( uint i = 1; i < x->req(); i++ ) | |
516 if( !x->in(i)->is_Load() ) | |
517 return false; | |
518 return true; | |
519 } | |
520 return false; | |
521 } | |
522 | |
523 // **************************************************************************** | |
524 | |
525 // REQUIRED FUNCTIONALITY | |
526 | |
527 // !!!!! Special hack to get all type of calls to specify the byte offset | |
528 // from the start of the call to the point where the return address | |
529 // will point. | |
530 // The "return address" is the address of the call instruction, plus 8. | |
531 | |
532 int MachCallStaticJavaNode::ret_addr_offset() { | |
533 return NativeCall::instruction_size; // call; delay slot | |
534 } | |
535 | |
536 int MachCallDynamicJavaNode::ret_addr_offset() { | |
537 int vtable_index = this->_vtable_index; | |
538 if (vtable_index < 0) { | |
539 // must be invalid_vtable_index, not nonvirtual_vtable_index | |
540 assert(vtable_index == methodOopDesc::invalid_vtable_index, "correct sentinel value"); | |
541 return (NativeMovConstReg::instruction_size + | |
542 NativeCall::instruction_size); // sethi; setlo; call; delay slot | |
543 } else { | |
544 assert(!UseInlineCaches, "expect vtable calls only if not using ICs"); | |
545 int entry_offset = instanceKlass::vtable_start_offset() + vtable_index*vtableEntry::size(); | |
546 int v_off = entry_offset*wordSize + vtableEntry::method_offset_in_bytes(); | |
547 if( Assembler::is_simm13(v_off) ) { | |
548 return (3*BytesPerInstWord + // ld_ptr, ld_ptr, ld_ptr | |
549 NativeCall::instruction_size); // call; delay slot | |
550 } else { | |
551 return (5*BytesPerInstWord + // ld_ptr, set_hi, set, ld_ptr, ld_ptr | |
552 NativeCall::instruction_size); // call; delay slot | |
553 } | |
554 } | |
555 } | |
556 | |
557 int MachCallRuntimeNode::ret_addr_offset() { | |
558 #ifdef _LP64 | |
559 return NativeFarCall::instruction_size; // farcall; delay slot | |
560 #else | |
561 return NativeCall::instruction_size; // call; delay slot | |
562 #endif | |
563 } | |
564 | |
565 // Indicate if the safepoint node needs the polling page as an input. | |
566 // Since Sparc does not have absolute addressing, it does. | |
567 bool SafePointNode::needs_polling_address_input() { | |
568 return true; | |
569 } | |
570 | |
571 // emit an interrupt that is caught by the debugger (for debugging compiler) | |
572 void emit_break(CodeBuffer &cbuf) { | |
573 MacroAssembler _masm(&cbuf); | |
574 __ breakpoint_trap(); | |
575 } | |
576 | |
577 #ifndef PRODUCT | |
578 void MachBreakpointNode::format( PhaseRegAlloc *, outputStream *st ) const { | |
579 st->print("TA"); | |
580 } | |
581 #endif | |
582 | |
583 void MachBreakpointNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const { | |
584 emit_break(cbuf); | |
585 } | |
586 | |
587 uint MachBreakpointNode::size(PhaseRegAlloc *ra_) const { | |
588 return MachNode::size(ra_); | |
589 } | |
590 | |
591 // Traceable jump | |
592 void emit_jmpl(CodeBuffer &cbuf, int jump_target) { | |
593 MacroAssembler _masm(&cbuf); | |
594 Register rdest = reg_to_register_object(jump_target); | |
595 __ JMP(rdest, 0); | |
596 __ delayed()->nop(); | |
597 } | |
598 | |
599 // Traceable jump and set exception pc | |
600 void emit_jmpl_set_exception_pc(CodeBuffer &cbuf, int jump_target) { | |
601 MacroAssembler _masm(&cbuf); | |
602 Register rdest = reg_to_register_object(jump_target); | |
603 __ JMP(rdest, 0); | |
604 __ delayed()->add(O7, frame::pc_return_offset, Oissuing_pc ); | |
605 } | |
606 | |
607 void emit_nop(CodeBuffer &cbuf) { | |
608 MacroAssembler _masm(&cbuf); | |
609 __ nop(); | |
610 } | |
611 | |
612 void emit_illtrap(CodeBuffer &cbuf) { | |
613 MacroAssembler _masm(&cbuf); | |
614 __ illtrap(0); | |
615 } | |
616 | |
617 | |
618 intptr_t get_offset_from_base(const MachNode* n, const TypePtr* atype, int disp32) { | |
619 assert(n->rule() != loadUB_rule, ""); | |
620 | |
621 intptr_t offset = 0; | |
622 const TypePtr *adr_type = TYPE_PTR_SENTINAL; // Check for base==RegI, disp==immP | |
623 const Node* addr = n->get_base_and_disp(offset, adr_type); | |
624 assert(adr_type == (const TypePtr*)-1, "VerifyOops: no support for sparc operands with base==RegI, disp==immP"); | |
625 assert(addr != NULL && addr != (Node*)-1, "invalid addr"); | |
626 assert(addr->bottom_type()->isa_oopptr() == atype, ""); | |
627 atype = atype->add_offset(offset); | |
628 assert(disp32 == offset, "wrong disp32"); | |
629 return atype->_offset; | |
630 } | |
631 | |
632 | |
633 intptr_t get_offset_from_base_2(const MachNode* n, const TypePtr* atype, int disp32) { | |
634 assert(n->rule() != loadUB_rule, ""); | |
635 | |
636 intptr_t offset = 0; | |
637 Node* addr = n->in(2); | |
638 assert(addr->bottom_type()->isa_oopptr() == atype, ""); | |
639 if (addr->is_Mach() && addr->as_Mach()->ideal_Opcode() == Op_AddP) { | |
640 Node* a = addr->in(2/*AddPNode::Address*/); | |
641 Node* o = addr->in(3/*AddPNode::Offset*/); | |
642 offset = o->is_Con() ? o->bottom_type()->is_intptr_t()->get_con() : Type::OffsetBot; | |
643 atype = a->bottom_type()->is_ptr()->add_offset(offset); | |
644 assert(atype->isa_oop_ptr(), "still an oop"); | |
645 } | |
646 offset = atype->is_ptr()->_offset; | |
647 if (offset != Type::OffsetBot) offset += disp32; | |
648 return offset; | |
649 } | |
650 | |
651 // Standard Sparc opcode form2 field breakdown | |
652 static inline void emit2_19(CodeBuffer &cbuf, int f30, int f29, int f25, int f22, int f20, int f19, int f0 ) { | |
653 f0 &= (1<<19)-1; // Mask displacement to 19 bits | |
654 int op = (f30 << 30) | | |
655 (f29 << 29) | | |
656 (f25 << 25) | | |
657 (f22 << 22) | | |
658 (f20 << 20) | | |
659 (f19 << 19) | | |
660 (f0 << 0); | |
661 *((int*)(cbuf.code_end())) = op; | |
662 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
663 } | |
664 | |
665 // Standard Sparc opcode form2 field breakdown | |
666 static inline void emit2_22(CodeBuffer &cbuf, int f30, int f25, int f22, int f0 ) { | |
667 f0 >>= 10; // Drop 10 bits | |
668 f0 &= (1<<22)-1; // Mask displacement to 22 bits | |
669 int op = (f30 << 30) | | |
670 (f25 << 25) | | |
671 (f22 << 22) | | |
672 (f0 << 0); | |
673 *((int*)(cbuf.code_end())) = op; | |
674 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
675 } | |
676 | |
677 // Standard Sparc opcode form3 field breakdown | |
678 static inline void emit3(CodeBuffer &cbuf, int f30, int f25, int f19, int f14, int f5, int f0 ) { | |
679 int op = (f30 << 30) | | |
680 (f25 << 25) | | |
681 (f19 << 19) | | |
682 (f14 << 14) | | |
683 (f5 << 5) | | |
684 (f0 << 0); | |
685 *((int*)(cbuf.code_end())) = op; | |
686 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
687 } | |
688 | |
689 // Standard Sparc opcode form3 field breakdown | |
690 static inline void emit3_simm13(CodeBuffer &cbuf, int f30, int f25, int f19, int f14, int simm13 ) { | |
691 simm13 &= (1<<13)-1; // Mask to 13 bits | |
692 int op = (f30 << 30) | | |
693 (f25 << 25) | | |
694 (f19 << 19) | | |
695 (f14 << 14) | | |
696 (1 << 13) | // bit to indicate immediate-mode | |
697 (simm13<<0); | |
698 *((int*)(cbuf.code_end())) = op; | |
699 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
700 } | |
701 | |
702 static inline void emit3_simm10(CodeBuffer &cbuf, int f30, int f25, int f19, int f14, int simm10 ) { | |
703 simm10 &= (1<<10)-1; // Mask to 10 bits | |
704 emit3_simm13(cbuf,f30,f25,f19,f14,simm10); | |
705 } | |
706 | |
707 #ifdef ASSERT | |
708 // Helper function for VerifyOops in emit_form3_mem_reg | |
709 void verify_oops_warning(const MachNode *n, int ideal_op, int mem_op) { | |
710 warning("VerifyOops encountered unexpected instruction:"); | |
711 n->dump(2); | |
712 warning("Instruction has ideal_Opcode==Op_%s and op_ld==Op_%s \n", NodeClassNames[ideal_op], NodeClassNames[mem_op]); | |
713 } | |
714 #endif | |
715 | |
716 | |
717 void emit_form3_mem_reg(CodeBuffer &cbuf, const MachNode* n, int primary, int tertiary, | |
718 int src1_enc, int disp32, int src2_enc, int dst_enc) { | |
719 | |
720 #ifdef ASSERT | |
721 // The following code implements the +VerifyOops feature. | |
722 // It verifies oop values which are loaded into or stored out of | |
723 // the current method activation. +VerifyOops complements techniques | |
724 // like ScavengeALot, because it eagerly inspects oops in transit, | |
725 // as they enter or leave the stack, as opposed to ScavengeALot, | |
726 // which inspects oops "at rest", in the stack or heap, at safepoints. | |
727 // For this reason, +VerifyOops can sometimes detect bugs very close | |
728 // to their point of creation. It can also serve as a cross-check | |
729 // on the validity of oop maps, when used toegether with ScavengeALot. | |
730 | |
731 // It would be good to verify oops at other points, especially | |
732 // when an oop is used as a base pointer for a load or store. | |
733 // This is presently difficult, because it is hard to know when | |
734 // a base address is biased or not. (If we had such information, | |
735 // it would be easy and useful to make a two-argument version of | |
736 // verify_oop which unbiases the base, and performs verification.) | |
737 | |
738 assert((uint)tertiary == 0xFFFFFFFF || tertiary == REGP_OP, "valid tertiary"); | |
739 bool is_verified_oop_base = false; | |
740 bool is_verified_oop_load = false; | |
741 bool is_verified_oop_store = false; | |
742 int tmp_enc = -1; | |
743 if (VerifyOops && src1_enc != R_SP_enc) { | |
744 // classify the op, mainly for an assert check | |
745 int st_op = 0, ld_op = 0; | |
746 switch (primary) { | |
747 case Assembler::stb_op3: st_op = Op_StoreB; break; | |
748 case Assembler::sth_op3: st_op = Op_StoreC; break; | |
749 case Assembler::stx_op3: // may become StoreP or stay StoreI or StoreD0 | |
750 case Assembler::stw_op3: st_op = Op_StoreI; break; | |
751 case Assembler::std_op3: st_op = Op_StoreL; break; | |
752 case Assembler::stf_op3: st_op = Op_StoreF; break; | |
753 case Assembler::stdf_op3: st_op = Op_StoreD; break; | |
754 | |
755 case Assembler::ldsb_op3: ld_op = Op_LoadB; break; | |
756 case Assembler::lduh_op3: ld_op = Op_LoadC; break; | |
757 case Assembler::ldsh_op3: ld_op = Op_LoadS; break; | |
758 case Assembler::ldx_op3: // may become LoadP or stay LoadI | |
759 case Assembler::ldsw_op3: // may become LoadP or stay LoadI | |
760 case Assembler::lduw_op3: ld_op = Op_LoadI; break; | |
761 case Assembler::ldd_op3: ld_op = Op_LoadL; break; | |
762 case Assembler::ldf_op3: ld_op = Op_LoadF; break; | |
763 case Assembler::lddf_op3: ld_op = Op_LoadD; break; | |
764 case Assembler::ldub_op3: ld_op = Op_LoadB; break; | |
765 case Assembler::prefetch_op3: ld_op = Op_LoadI; break; | |
766 | |
767 default: ShouldNotReachHere(); | |
768 } | |
769 if (tertiary == REGP_OP) { | |
770 if (st_op == Op_StoreI) st_op = Op_StoreP; | |
771 else if (ld_op == Op_LoadI) ld_op = Op_LoadP; | |
772 else ShouldNotReachHere(); | |
773 if (st_op) { | |
774 // a store | |
775 // inputs are (0:control, 1:memory, 2:address, 3:value) | |
776 Node* n2 = n->in(3); | |
777 if (n2 != NULL) { | |
778 const Type* t = n2->bottom_type(); | |
779 is_verified_oop_store = t->isa_oop_ptr() ? (t->is_ptr()->_offset==0) : false; | |
780 } | |
781 } else { | |
782 // a load | |
783 const Type* t = n->bottom_type(); | |
784 is_verified_oop_load = t->isa_oop_ptr() ? (t->is_ptr()->_offset==0) : false; | |
785 } | |
786 } | |
787 | |
788 if (ld_op) { | |
789 // a Load | |
790 // inputs are (0:control, 1:memory, 2:address) | |
791 if (!(n->ideal_Opcode()==ld_op) && // Following are special cases | |
792 !(n->ideal_Opcode()==Op_LoadLLocked && ld_op==Op_LoadI) && | |
793 !(n->ideal_Opcode()==Op_LoadPLocked && ld_op==Op_LoadP) && | |
794 !(n->ideal_Opcode()==Op_LoadI && ld_op==Op_LoadF) && | |
795 !(n->ideal_Opcode()==Op_LoadF && ld_op==Op_LoadI) && | |
796 !(n->ideal_Opcode()==Op_LoadRange && ld_op==Op_LoadI) && | |
797 !(n->ideal_Opcode()==Op_LoadKlass && ld_op==Op_LoadP) && | |
798 !(n->ideal_Opcode()==Op_LoadL && ld_op==Op_LoadI) && | |
799 !(n->ideal_Opcode()==Op_LoadL_unaligned && ld_op==Op_LoadI) && | |
800 !(n->ideal_Opcode()==Op_LoadD_unaligned && ld_op==Op_LoadF) && | |
801 !(n->ideal_Opcode()==Op_ConvI2F && ld_op==Op_LoadF) && | |
802 !(n->ideal_Opcode()==Op_ConvI2D && ld_op==Op_LoadF) && | |
803 !(n->ideal_Opcode()==Op_PrefetchRead && ld_op==Op_LoadI) && | |
804 !(n->ideal_Opcode()==Op_PrefetchWrite && ld_op==Op_LoadI) && | |
805 !(n->rule() == loadUB_rule)) { | |
806 verify_oops_warning(n, n->ideal_Opcode(), ld_op); | |
807 } | |
808 } else if (st_op) { | |
809 // a Store | |
810 // inputs are (0:control, 1:memory, 2:address, 3:value) | |
811 if (!(n->ideal_Opcode()==st_op) && // Following are special cases | |
812 !(n->ideal_Opcode()==Op_StoreCM && st_op==Op_StoreB) && | |
813 !(n->ideal_Opcode()==Op_StoreI && st_op==Op_StoreF) && | |
814 !(n->ideal_Opcode()==Op_StoreF && st_op==Op_StoreI) && | |
815 !(n->ideal_Opcode()==Op_StoreL && st_op==Op_StoreI) && | |
816 !(n->ideal_Opcode()==Op_StoreD && st_op==Op_StoreI && n->rule() == storeD0_rule)) { | |
817 verify_oops_warning(n, n->ideal_Opcode(), st_op); | |
818 } | |
819 } | |
820 | |
821 if (src2_enc == R_G0_enc && n->rule() != loadUB_rule && n->ideal_Opcode() != Op_StoreCM ) { | |
822 Node* addr = n->in(2); | |
823 if (!(addr->is_Mach() && addr->as_Mach()->ideal_Opcode() == Op_AddP)) { | |
824 const TypeOopPtr* atype = addr->bottom_type()->isa_instptr(); // %%% oopptr? | |
825 if (atype != NULL) { | |
826 intptr_t offset = get_offset_from_base(n, atype, disp32); | |
827 intptr_t offset_2 = get_offset_from_base_2(n, atype, disp32); | |
828 if (offset != offset_2) { | |
829 get_offset_from_base(n, atype, disp32); | |
830 get_offset_from_base_2(n, atype, disp32); | |
831 } | |
832 assert(offset == offset_2, "different offsets"); | |
833 if (offset == disp32) { | |
834 // we now know that src1 is a true oop pointer | |
835 is_verified_oop_base = true; | |
836 if (ld_op && src1_enc == dst_enc && ld_op != Op_LoadF && ld_op != Op_LoadD) { | |
837 if( primary == Assembler::ldd_op3 ) { | |
838 is_verified_oop_base = false; // Cannot 'ldd' into O7 | |
839 } else { | |
840 tmp_enc = dst_enc; | |
841 dst_enc = R_O7_enc; // Load into O7; preserve source oop | |
842 assert(src1_enc != dst_enc, ""); | |
843 } | |
844 } | |
845 } | |
846 if (st_op && (( offset == oopDesc::klass_offset_in_bytes()) | |
847 || offset == oopDesc::mark_offset_in_bytes())) { | |
848 // loading the mark should not be allowed either, but | |
849 // we don't check this since it conflicts with InlineObjectHash | |
850 // usage of LoadINode to get the mark. We could keep the | |
851 // check if we create a new LoadMarkNode | |
852 // but do not verify the object before its header is initialized | |
853 ShouldNotReachHere(); | |
854 } | |
855 } | |
856 } | |
857 } | |
858 } | |
859 #endif | |
860 | |
861 uint instr; | |
862 instr = (Assembler::ldst_op << 30) | |
863 | (dst_enc << 25) | |
864 | (primary << 19) | |
865 | (src1_enc << 14); | |
866 | |
867 uint index = src2_enc; | |
868 int disp = disp32; | |
869 | |
870 if (src1_enc == R_SP_enc || src1_enc == R_FP_enc) | |
871 disp += STACK_BIAS; | |
872 | |
873 // We should have a compiler bailout here rather than a guarantee. | |
874 // Better yet would be some mechanism to handle variable-size matches correctly. | |
875 guarantee(Assembler::is_simm13(disp), "Do not match large constant offsets" ); | |
876 | |
877 if( disp == 0 ) { | |
878 // use reg-reg form | |
879 // bit 13 is already zero | |
880 instr |= index; | |
881 } else { | |
882 // use reg-imm form | |
883 instr |= 0x00002000; // set bit 13 to one | |
884 instr |= disp & 0x1FFF; | |
885 } | |
886 | |
887 uint *code = (uint*)cbuf.code_end(); | |
888 *code = instr; | |
889 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
890 | |
891 #ifdef ASSERT | |
892 { | |
893 MacroAssembler _masm(&cbuf); | |
894 if (is_verified_oop_base) { | |
895 __ verify_oop(reg_to_register_object(src1_enc)); | |
896 } | |
897 if (is_verified_oop_store) { | |
898 __ verify_oop(reg_to_register_object(dst_enc)); | |
899 } | |
900 if (tmp_enc != -1) { | |
901 __ mov(O7, reg_to_register_object(tmp_enc)); | |
902 } | |
903 if (is_verified_oop_load) { | |
904 __ verify_oop(reg_to_register_object(dst_enc)); | |
905 } | |
906 } | |
907 #endif | |
908 } | |
909 | |
910 void emit_form3_mem_reg_asi(CodeBuffer &cbuf, const MachNode* n, int primary, int tertiary, | |
911 int src1_enc, int disp32, int src2_enc, int dst_enc, int asi) { | |
912 | |
913 uint instr; | |
914 instr = (Assembler::ldst_op << 30) | |
915 | (dst_enc << 25) | |
916 | (primary << 19) | |
917 | (src1_enc << 14); | |
918 | |
919 int disp = disp32; | |
920 int index = src2_enc; | |
921 | |
922 if (src1_enc == R_SP_enc || src1_enc == R_FP_enc) | |
923 disp += STACK_BIAS; | |
924 | |
925 // We should have a compiler bailout here rather than a guarantee. | |
926 // Better yet would be some mechanism to handle variable-size matches correctly. | |
927 guarantee(Assembler::is_simm13(disp), "Do not match large constant offsets" ); | |
928 | |
929 if( disp != 0 ) { | |
930 // use reg-reg form | |
931 // set src2=R_O7 contains offset | |
932 index = R_O7_enc; | |
933 emit3_simm13( cbuf, Assembler::arith_op, index, Assembler::or_op3, 0, disp); | |
934 } | |
935 instr |= (asi << 5); | |
936 instr |= index; | |
937 uint *code = (uint*)cbuf.code_end(); | |
938 *code = instr; | |
939 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
940 } | |
941 | |
942 void emit_call_reloc(CodeBuffer &cbuf, intptr_t entry_point, relocInfo::relocType rtype, bool preserve_g2 = false, bool force_far_call = false) { | |
943 // The method which records debug information at every safepoint | |
944 // expects the call to be the first instruction in the snippet as | |
945 // it creates a PcDesc structure which tracks the offset of a call | |
946 // from the start of the codeBlob. This offset is computed as | |
947 // code_end() - code_begin() of the code which has been emitted | |
948 // so far. | |
949 // In this particular case we have skirted around the problem by | |
950 // putting the "mov" instruction in the delay slot but the problem | |
951 // may bite us again at some other point and a cleaner/generic | |
952 // solution using relocations would be needed. | |
953 MacroAssembler _masm(&cbuf); | |
954 __ set_inst_mark(); | |
955 | |
956 // We flush the current window just so that there is a valid stack copy | |
957 // the fact that the current window becomes active again instantly is | |
958 // not a problem there is nothing live in it. | |
959 | |
960 #ifdef ASSERT | |
961 int startpos = __ offset(); | |
962 #endif /* ASSERT */ | |
963 | |
964 #ifdef _LP64 | |
965 // Calls to the runtime or native may not be reachable from compiled code, | |
966 // so we generate the far call sequence on 64 bit sparc. | |
967 // This code sequence is relocatable to any address, even on LP64. | |
968 if ( force_far_call ) { | |
969 __ relocate(rtype); | |
970 Address dest(O7, (address)entry_point); | |
971 __ jumpl_to(dest, O7); | |
972 } | |
973 else | |
974 #endif | |
975 { | |
976 __ call((address)entry_point, rtype); | |
977 } | |
978 | |
979 if (preserve_g2) __ delayed()->mov(G2, L7); | |
980 else __ delayed()->nop(); | |
981 | |
982 if (preserve_g2) __ mov(L7, G2); | |
983 | |
984 #ifdef ASSERT | |
985 if (preserve_g2 && (VerifyCompiledCode || VerifyOops)) { | |
986 #ifdef _LP64 | |
987 // Trash argument dump slots. | |
988 __ set(0xb0b8ac0db0b8ac0d, G1); | |
989 __ mov(G1, G5); | |
990 __ stx(G1, SP, STACK_BIAS + 0x80); | |
991 __ stx(G1, SP, STACK_BIAS + 0x88); | |
992 __ stx(G1, SP, STACK_BIAS + 0x90); | |
993 __ stx(G1, SP, STACK_BIAS + 0x98); | |
994 __ stx(G1, SP, STACK_BIAS + 0xA0); | |
995 __ stx(G1, SP, STACK_BIAS + 0xA8); | |
996 #else // _LP64 | |
997 // this is also a native call, so smash the first 7 stack locations, | |
998 // and the various registers | |
999 | |
1000 // Note: [SP+0x40] is sp[callee_aggregate_return_pointer_sp_offset], | |
1001 // while [SP+0x44..0x58] are the argument dump slots. | |
1002 __ set((intptr_t)0xbaadf00d, G1); | |
1003 __ mov(G1, G5); | |
1004 __ sllx(G1, 32, G1); | |
1005 __ or3(G1, G5, G1); | |
1006 __ mov(G1, G5); | |
1007 __ stx(G1, SP, 0x40); | |
1008 __ stx(G1, SP, 0x48); | |
1009 __ stx(G1, SP, 0x50); | |
1010 __ stw(G1, SP, 0x58); // Do not trash [SP+0x5C] which is a usable spill slot | |
1011 #endif // _LP64 | |
1012 } | |
1013 #endif /*ASSERT*/ | |
1014 } | |
1015 | |
1016 //============================================================================= | |
1017 // REQUIRED FUNCTIONALITY for encoding | |
1018 void emit_lo(CodeBuffer &cbuf, int val) { } | |
1019 void emit_hi(CodeBuffer &cbuf, int val) { } | |
1020 | |
1021 void emit_ptr(CodeBuffer &cbuf, intptr_t val, Register reg, bool ForceRelocatable) { | |
1022 MacroAssembler _masm(&cbuf); | |
1023 if (ForceRelocatable) { | |
1024 Address addr(reg, (address)val); | |
1025 __ sethi(addr, ForceRelocatable); | |
1026 __ add(addr, reg); | |
1027 } else { | |
1028 __ set(val, reg); | |
1029 } | |
1030 } | |
1031 | |
1032 | |
1033 //============================================================================= | |
1034 | |
1035 #ifndef PRODUCT | |
1036 void MachPrologNode::format( PhaseRegAlloc *ra_, outputStream *st ) const { | |
1037 Compile* C = ra_->C; | |
1038 | |
1039 for (int i = 0; i < OptoPrologueNops; i++) { | |
1040 st->print_cr("NOP"); st->print("\t"); | |
1041 } | |
1042 | |
1043 if( VerifyThread ) { | |
1044 st->print_cr("Verify_Thread"); st->print("\t"); | |
1045 } | |
1046 | |
1047 size_t framesize = C->frame_slots() << LogBytesPerInt; | |
1048 | |
1049 // Calls to C2R adapters often do not accept exceptional returns. | |
1050 // We require that their callers must bang for them. But be careful, because | |
1051 // some VM calls (such as call site linkage) can use several kilobytes of | |
1052 // stack. But the stack safety zone should account for that. | |
1053 // See bugs 4446381, 4468289, 4497237. | |
1054 if (C->need_stack_bang(framesize)) { | |
1055 st->print_cr("! stack bang"); st->print("\t"); | |
1056 } | |
1057 | |
1058 if (Assembler::is_simm13(-framesize)) { | |
1059 st->print ("SAVE R_SP,-%d,R_SP",framesize); | |
1060 } else { | |
1061 st->print_cr("SETHI R_SP,hi%%(-%d),R_G3",framesize); st->print("\t"); | |
1062 st->print_cr("ADD R_G3,lo%%(-%d),R_G3",framesize); st->print("\t"); | |
1063 st->print ("SAVE R_SP,R_G3,R_SP"); | |
1064 } | |
1065 | |
1066 } | |
1067 #endif | |
1068 | |
1069 void MachPrologNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const { | |
1070 Compile* C = ra_->C; | |
1071 MacroAssembler _masm(&cbuf); | |
1072 | |
1073 for (int i = 0; i < OptoPrologueNops; i++) { | |
1074 __ nop(); | |
1075 } | |
1076 | |
1077 __ verify_thread(); | |
1078 | |
1079 size_t framesize = C->frame_slots() << LogBytesPerInt; | |
1080 assert(framesize >= 16*wordSize, "must have room for reg. save area"); | |
1081 assert(framesize%(2*wordSize) == 0, "must preserve 2*wordSize alignment"); | |
1082 | |
1083 // Calls to C2R adapters often do not accept exceptional returns. | |
1084 // We require that their callers must bang for them. But be careful, because | |
1085 // some VM calls (such as call site linkage) can use several kilobytes of | |
1086 // stack. But the stack safety zone should account for that. | |
1087 // See bugs 4446381, 4468289, 4497237. | |
1088 if (C->need_stack_bang(framesize)) { | |
1089 __ generate_stack_overflow_check(framesize); | |
1090 } | |
1091 | |
1092 if (Assembler::is_simm13(-framesize)) { | |
1093 __ save(SP, -framesize, SP); | |
1094 } else { | |
1095 __ sethi(-framesize & ~0x3ff, G3); | |
1096 __ add(G3, -framesize & 0x3ff, G3); | |
1097 __ save(SP, G3, SP); | |
1098 } | |
1099 C->set_frame_complete( __ offset() ); | |
1100 } | |
1101 | |
1102 uint MachPrologNode::size(PhaseRegAlloc *ra_) const { | |
1103 return MachNode::size(ra_); | |
1104 } | |
1105 | |
1106 int MachPrologNode::reloc() const { | |
1107 return 10; // a large enough number | |
1108 } | |
1109 | |
1110 //============================================================================= | |
1111 #ifndef PRODUCT | |
1112 void MachEpilogNode::format( PhaseRegAlloc *ra_, outputStream *st ) const { | |
1113 Compile* C = ra_->C; | |
1114 | |
1115 if( do_polling() && ra_->C->is_method_compilation() ) { | |
1116 st->print("SETHI #PollAddr,L0\t! Load Polling address\n\t"); | |
1117 #ifdef _LP64 | |
1118 st->print("LDX [L0],G0\t!Poll for Safepointing\n\t"); | |
1119 #else | |
1120 st->print("LDUW [L0],G0\t!Poll for Safepointing\n\t"); | |
1121 #endif | |
1122 } | |
1123 | |
1124 if( do_polling() ) | |
1125 st->print("RET\n\t"); | |
1126 | |
1127 st->print("RESTORE"); | |
1128 } | |
1129 #endif | |
1130 | |
1131 void MachEpilogNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const { | |
1132 MacroAssembler _masm(&cbuf); | |
1133 Compile* C = ra_->C; | |
1134 | |
1135 __ verify_thread(); | |
1136 | |
1137 // If this does safepoint polling, then do it here | |
1138 if( do_polling() && ra_->C->is_method_compilation() ) { | |
1139 Address polling_page(L0, (address)os::get_polling_page()); | |
1140 __ sethi(polling_page, false); | |
1141 __ relocate(relocInfo::poll_return_type); | |
1142 __ ld_ptr( L0, 0, G0 ); | |
1143 } | |
1144 | |
1145 // If this is a return, then stuff the restore in the delay slot | |
1146 if( do_polling() ) { | |
1147 __ ret(); | |
1148 __ delayed()->restore(); | |
1149 } else { | |
1150 __ restore(); | |
1151 } | |
1152 } | |
1153 | |
1154 uint MachEpilogNode::size(PhaseRegAlloc *ra_) const { | |
1155 return MachNode::size(ra_); | |
1156 } | |
1157 | |
1158 int MachEpilogNode::reloc() const { | |
1159 return 16; // a large enough number | |
1160 } | |
1161 | |
1162 const Pipeline * MachEpilogNode::pipeline() const { | |
1163 return MachNode::pipeline_class(); | |
1164 } | |
1165 | |
1166 int MachEpilogNode::safepoint_offset() const { | |
1167 assert( do_polling(), "no return for this epilog node"); | |
1168 return MacroAssembler::size_of_sethi(os::get_polling_page()); | |
1169 } | |
1170 | |
1171 //============================================================================= | |
1172 | |
1173 // Figure out which register class each belongs in: rc_int, rc_float, rc_stack | |
1174 enum RC { rc_bad, rc_int, rc_float, rc_stack }; | |
1175 static enum RC rc_class( OptoReg::Name reg ) { | |
1176 if( !OptoReg::is_valid(reg) ) return rc_bad; | |
1177 if (OptoReg::is_stack(reg)) return rc_stack; | |
1178 VMReg r = OptoReg::as_VMReg(reg); | |
1179 if (r->is_Register()) return rc_int; | |
1180 assert(r->is_FloatRegister(), "must be"); | |
1181 return rc_float; | |
1182 } | |
1183 | |
1184 static int impl_helper( const MachNode *mach, CodeBuffer *cbuf, PhaseRegAlloc *ra_, bool do_size, bool is_load, int offset, int reg, int opcode, const char *op_str, int size, outputStream* st ) { | |
1185 if( cbuf ) { | |
1186 // Better yet would be some mechanism to handle variable-size matches correctly | |
1187 if (!Assembler::is_simm13(offset + STACK_BIAS)) { | |
1188 ra_->C->record_method_not_compilable("unable to handle large constant offsets"); | |
1189 } else { | |
1190 emit_form3_mem_reg(*cbuf, mach, opcode, -1, R_SP_enc, offset, 0, Matcher::_regEncode[reg]); | |
1191 } | |
1192 } | |
1193 #ifndef PRODUCT | |
1194 else if( !do_size ) { | |
1195 if( size != 0 ) st->print("\n\t"); | |
1196 if( is_load ) st->print("%s [R_SP + #%d],R_%s\t! spill",op_str,offset,OptoReg::regname(reg)); | |
1197 else st->print("%s R_%s,[R_SP + #%d]\t! spill",op_str,OptoReg::regname(reg),offset); | |
1198 } | |
1199 #endif | |
1200 return size+4; | |
1201 } | |
1202 | |
1203 static int impl_mov_helper( CodeBuffer *cbuf, bool do_size, int src, int dst, int op1, int op2, const char *op_str, int size, outputStream* st ) { | |
1204 if( cbuf ) emit3( *cbuf, Assembler::arith_op, Matcher::_regEncode[dst], op1, 0, op2, Matcher::_regEncode[src] ); | |
1205 #ifndef PRODUCT | |
1206 else if( !do_size ) { | |
1207 if( size != 0 ) st->print("\n\t"); | |
1208 st->print("%s R_%s,R_%s\t! spill",op_str,OptoReg::regname(src),OptoReg::regname(dst)); | |
1209 } | |
1210 #endif | |
1211 return size+4; | |
1212 } | |
1213 | |
1214 uint MachSpillCopyNode::implementation( CodeBuffer *cbuf, | |
1215 PhaseRegAlloc *ra_, | |
1216 bool do_size, | |
1217 outputStream* st ) const { | |
1218 // Get registers to move | |
1219 OptoReg::Name src_second = ra_->get_reg_second(in(1)); | |
1220 OptoReg::Name src_first = ra_->get_reg_first(in(1)); | |
1221 OptoReg::Name dst_second = ra_->get_reg_second(this ); | |
1222 OptoReg::Name dst_first = ra_->get_reg_first(this ); | |
1223 | |
1224 enum RC src_second_rc = rc_class(src_second); | |
1225 enum RC src_first_rc = rc_class(src_first); | |
1226 enum RC dst_second_rc = rc_class(dst_second); | |
1227 enum RC dst_first_rc = rc_class(dst_first); | |
1228 | |
1229 assert( OptoReg::is_valid(src_first) && OptoReg::is_valid(dst_first), "must move at least 1 register" ); | |
1230 | |
1231 // Generate spill code! | |
1232 int size = 0; | |
1233 | |
1234 if( src_first == dst_first && src_second == dst_second ) | |
1235 return size; // Self copy, no move | |
1236 | |
1237 // -------------------------------------- | |
1238 // Check for mem-mem move. Load into unused float registers and fall into | |
1239 // the float-store case. | |
1240 if( src_first_rc == rc_stack && dst_first_rc == rc_stack ) { | |
1241 int offset = ra_->reg2offset(src_first); | |
1242 // Further check for aligned-adjacent pair, so we can use a double load | |
1243 if( (src_first&1)==0 && src_first+1 == src_second ) { | |
1244 src_second = OptoReg::Name(R_F31_num); | |
1245 src_second_rc = rc_float; | |
1246 size = impl_helper(this,cbuf,ra_,do_size,true,offset,R_F30_num,Assembler::lddf_op3,"LDDF",size, st); | |
1247 } else { | |
1248 size = impl_helper(this,cbuf,ra_,do_size,true,offset,R_F30_num,Assembler::ldf_op3 ,"LDF ",size, st); | |
1249 } | |
1250 src_first = OptoReg::Name(R_F30_num); | |
1251 src_first_rc = rc_float; | |
1252 } | |
1253 | |
1254 if( src_second_rc == rc_stack && dst_second_rc == rc_stack ) { | |
1255 int offset = ra_->reg2offset(src_second); | |
1256 size = impl_helper(this,cbuf,ra_,do_size,true,offset,R_F31_num,Assembler::ldf_op3,"LDF ",size, st); | |
1257 src_second = OptoReg::Name(R_F31_num); | |
1258 src_second_rc = rc_float; | |
1259 } | |
1260 | |
1261 // -------------------------------------- | |
1262 // Check for float->int copy; requires a trip through memory | |
1263 if( src_first_rc == rc_float && dst_first_rc == rc_int ) { | |
1264 int offset = frame::register_save_words*wordSize; | |
1265 if( cbuf ) { | |
1266 emit3_simm13( *cbuf, Assembler::arith_op, R_SP_enc, Assembler::sub_op3, R_SP_enc, 16 ); | |
1267 impl_helper(this,cbuf,ra_,do_size,false,offset,src_first,Assembler::stf_op3 ,"STF ",size, st); | |
1268 impl_helper(this,cbuf,ra_,do_size,true ,offset,dst_first,Assembler::lduw_op3,"LDUW",size, st); | |
1269 emit3_simm13( *cbuf, Assembler::arith_op, R_SP_enc, Assembler::add_op3, R_SP_enc, 16 ); | |
1270 } | |
1271 #ifndef PRODUCT | |
1272 else if( !do_size ) { | |
1273 if( size != 0 ) st->print("\n\t"); | |
1274 st->print( "SUB R_SP,16,R_SP\n"); | |
1275 impl_helper(this,cbuf,ra_,do_size,false,offset,src_first,Assembler::stf_op3 ,"STF ",size, st); | |
1276 impl_helper(this,cbuf,ra_,do_size,true ,offset,dst_first,Assembler::lduw_op3,"LDUW",size, st); | |
1277 st->print("\tADD R_SP,16,R_SP\n"); | |
1278 } | |
1279 #endif | |
1280 size += 16; | |
1281 } | |
1282 | |
1283 // -------------------------------------- | |
1284 // In the 32-bit 1-reg-longs build ONLY, I see mis-aligned long destinations. | |
1285 // In such cases, I have to do the big-endian swap. For aligned targets, the | |
1286 // hardware does the flop for me. Doubles are always aligned, so no problem | |
1287 // there. Misaligned sources only come from native-long-returns (handled | |
1288 // special below). | |
1289 #ifndef _LP64 | |
1290 if( src_first_rc == rc_int && // source is already big-endian | |
1291 src_second_rc != rc_bad && // 64-bit move | |
1292 ((dst_first&1)!=0 || dst_second != dst_first+1) ) { // misaligned dst | |
1293 assert( (src_first&1)==0 && src_second == src_first+1, "source must be aligned" ); | |
1294 // Do the big-endian flop. | |
1295 OptoReg::Name tmp = dst_first ; dst_first = dst_second ; dst_second = tmp ; | |
1296 enum RC tmp_rc = dst_first_rc; dst_first_rc = dst_second_rc; dst_second_rc = tmp_rc; | |
1297 } | |
1298 #endif | |
1299 | |
1300 // -------------------------------------- | |
1301 // Check for integer reg-reg copy | |
1302 if( src_first_rc == rc_int && dst_first_rc == rc_int ) { | |
1303 #ifndef _LP64 | |
1304 if( src_first == R_O0_num && src_second == R_O1_num ) { // Check for the evil O0/O1 native long-return case | |
1305 // Note: The _first and _second suffixes refer to the addresses of the the 2 halves of the 64-bit value | |
1306 // as stored in memory. On a big-endian machine like SPARC, this means that the _second | |
1307 // operand contains the least significant word of the 64-bit value and vice versa. | |
1308 OptoReg::Name tmp = OptoReg::Name(R_O7_num); | |
1309 assert( (dst_first&1)==0 && dst_second == dst_first+1, "return a native O0/O1 long to an aligned-adjacent 64-bit reg" ); | |
1310 // Shift O0 left in-place, zero-extend O1, then OR them into the dst | |
1311 if( cbuf ) { | |
1312 emit3_simm13( *cbuf, Assembler::arith_op, Matcher::_regEncode[tmp], Assembler::sllx_op3, Matcher::_regEncode[src_first], 0x1020 ); | |
1313 emit3_simm13( *cbuf, Assembler::arith_op, Matcher::_regEncode[src_second], Assembler::srl_op3, Matcher::_regEncode[src_second], 0x0000 ); | |
1314 emit3 ( *cbuf, Assembler::arith_op, Matcher::_regEncode[dst_first], Assembler:: or_op3, Matcher::_regEncode[tmp], 0, Matcher::_regEncode[src_second] ); | |
1315 #ifndef PRODUCT | |
1316 } else if( !do_size ) { | |
1317 if( size != 0 ) st->print("\n\t"); | |
1318 st->print("SLLX R_%s,32,R_%s\t! Move O0-first to O7-high\n\t", OptoReg::regname(src_first), OptoReg::regname(tmp)); | |
1319 st->print("SRL R_%s, 0,R_%s\t! Zero-extend O1\n\t", OptoReg::regname(src_second), OptoReg::regname(src_second)); | |
1320 st->print("OR R_%s,R_%s,R_%s\t! spill",OptoReg::regname(tmp), OptoReg::regname(src_second), OptoReg::regname(dst_first)); | |
1321 #endif | |
1322 } | |
1323 return size+12; | |
1324 } | |
1325 else if( dst_first == R_I0_num && dst_second == R_I1_num ) { | |
1326 // returning a long value in I0/I1 | |
1327 // a SpillCopy must be able to target a return instruction's reg_class | |
1328 // Note: The _first and _second suffixes refer to the addresses of the the 2 halves of the 64-bit value | |
1329 // as stored in memory. On a big-endian machine like SPARC, this means that the _second | |
1330 // operand contains the least significant word of the 64-bit value and vice versa. | |
1331 OptoReg::Name tdest = dst_first; | |
1332 | |
1333 if (src_first == dst_first) { | |
1334 tdest = OptoReg::Name(R_O7_num); | |
1335 size += 4; | |
1336 } | |
1337 | |
1338 if( cbuf ) { | |
1339 assert( (src_first&1) == 0 && (src_first+1) == src_second, "return value was in an aligned-adjacent 64-bit reg"); | |
1340 // Shift value in upper 32-bits of src to lower 32-bits of I0; move lower 32-bits to I1 | |
1341 // ShrL_reg_imm6 | |
1342 emit3_simm13( *cbuf, Assembler::arith_op, Matcher::_regEncode[tdest], Assembler::srlx_op3, Matcher::_regEncode[src_second], 32 | 0x1000 ); | |
1343 // ShrR_reg_imm6 src, 0, dst | |
1344 emit3_simm13( *cbuf, Assembler::arith_op, Matcher::_regEncode[dst_second], Assembler::srl_op3, Matcher::_regEncode[src_first], 0x0000 ); | |
1345 if (tdest != dst_first) { | |
1346 emit3 ( *cbuf, Assembler::arith_op, Matcher::_regEncode[dst_first], Assembler::or_op3, 0/*G0*/, 0/*op2*/, Matcher::_regEncode[tdest] ); | |
1347 } | |
1348 } | |
1349 #ifndef PRODUCT | |
1350 else if( !do_size ) { | |
1351 if( size != 0 ) st->print("\n\t"); // %%%%% !!!!! | |
1352 st->print("SRLX R_%s,32,R_%s\t! Extract MSW\n\t",OptoReg::regname(src_second),OptoReg::regname(tdest)); | |
1353 st->print("SRL R_%s, 0,R_%s\t! Extract LSW\n\t",OptoReg::regname(src_first),OptoReg::regname(dst_second)); | |
1354 if (tdest != dst_first) { | |
1355 st->print("MOV R_%s,R_%s\t! spill\n\t", OptoReg::regname(tdest), OptoReg::regname(dst_first)); | |
1356 } | |
1357 } | |
1358 #endif // PRODUCT | |
1359 return size+8; | |
1360 } | |
1361 #endif // !_LP64 | |
1362 // Else normal reg-reg copy | |
1363 assert( src_second != dst_first, "smashed second before evacuating it" ); | |
1364 size = impl_mov_helper(cbuf,do_size,src_first,dst_first,Assembler::or_op3,0,"MOV ",size, st); | |
1365 assert( (src_first&1) == 0 && (dst_first&1) == 0, "never move second-halves of int registers" ); | |
1366 // This moves an aligned adjacent pair. | |
1367 // See if we are done. | |
1368 if( src_first+1 == src_second && dst_first+1 == dst_second ) | |
1369 return size; | |
1370 } | |
1371 | |
1372 // Check for integer store | |
1373 if( src_first_rc == rc_int && dst_first_rc == rc_stack ) { | |
1374 int offset = ra_->reg2offset(dst_first); | |
1375 // Further check for aligned-adjacent pair, so we can use a double store | |
1376 if( (src_first&1)==0 && src_first+1 == src_second && (dst_first&1)==0 && dst_first+1 == dst_second ) | |
1377 return impl_helper(this,cbuf,ra_,do_size,false,offset,src_first,Assembler::stx_op3,"STX ",size, st); | |
1378 size = impl_helper(this,cbuf,ra_,do_size,false,offset,src_first,Assembler::stw_op3,"STW ",size, st); | |
1379 } | |
1380 | |
1381 // Check for integer load | |
1382 if( dst_first_rc == rc_int && src_first_rc == rc_stack ) { | |
1383 int offset = ra_->reg2offset(src_first); | |
1384 // Further check for aligned-adjacent pair, so we can use a double load | |
1385 if( (src_first&1)==0 && src_first+1 == src_second && (dst_first&1)==0 && dst_first+1 == dst_second ) | |
1386 return impl_helper(this,cbuf,ra_,do_size,true,offset,dst_first,Assembler::ldx_op3 ,"LDX ",size, st); | |
1387 size = impl_helper(this,cbuf,ra_,do_size,true,offset,dst_first,Assembler::lduw_op3,"LDUW",size, st); | |
1388 } | |
1389 | |
1390 // Check for float reg-reg copy | |
1391 if( src_first_rc == rc_float && dst_first_rc == rc_float ) { | |
1392 // Further check for aligned-adjacent pair, so we can use a double move | |
1393 if( (src_first&1)==0 && src_first+1 == src_second && (dst_first&1)==0 && dst_first+1 == dst_second ) | |
1394 return impl_mov_helper(cbuf,do_size,src_first,dst_first,Assembler::fpop1_op3,Assembler::fmovd_opf,"FMOVD",size, st); | |
1395 size = impl_mov_helper(cbuf,do_size,src_first,dst_first,Assembler::fpop1_op3,Assembler::fmovs_opf,"FMOVS",size, st); | |
1396 } | |
1397 | |
1398 // Check for float store | |
1399 if( src_first_rc == rc_float && dst_first_rc == rc_stack ) { | |
1400 int offset = ra_->reg2offset(dst_first); | |
1401 // Further check for aligned-adjacent pair, so we can use a double store | |
1402 if( (src_first&1)==0 && src_first+1 == src_second && (dst_first&1)==0 && dst_first+1 == dst_second ) | |
1403 return impl_helper(this,cbuf,ra_,do_size,false,offset,src_first,Assembler::stdf_op3,"STDF",size, st); | |
1404 size = impl_helper(this,cbuf,ra_,do_size,false,offset,src_first,Assembler::stf_op3 ,"STF ",size, st); | |
1405 } | |
1406 | |
1407 // Check for float load | |
1408 if( dst_first_rc == rc_float && src_first_rc == rc_stack ) { | |
1409 int offset = ra_->reg2offset(src_first); | |
1410 // Further check for aligned-adjacent pair, so we can use a double load | |
1411 if( (src_first&1)==0 && src_first+1 == src_second && (dst_first&1)==0 && dst_first+1 == dst_second ) | |
1412 return impl_helper(this,cbuf,ra_,do_size,true,offset,dst_first,Assembler::lddf_op3,"LDDF",size, st); | |
1413 size = impl_helper(this,cbuf,ra_,do_size,true,offset,dst_first,Assembler::ldf_op3 ,"LDF ",size, st); | |
1414 } | |
1415 | |
1416 // -------------------------------------------------------------------- | |
1417 // Check for hi bits still needing moving. Only happens for misaligned | |
1418 // arguments to native calls. | |
1419 if( src_second == dst_second ) | |
1420 return size; // Self copy; no move | |
1421 assert( src_second_rc != rc_bad && dst_second_rc != rc_bad, "src_second & dst_second cannot be Bad" ); | |
1422 | |
1423 #ifndef _LP64 | |
1424 // In the LP64 build, all registers can be moved as aligned/adjacent | |
1425 // pairs, so there's never any need to move the high bits seperately. | |
1426 // The 32-bit builds have to deal with the 32-bit ABI which can force | |
1427 // all sorts of silly alignment problems. | |
1428 | |
1429 // Check for integer reg-reg copy. Hi bits are stuck up in the top | |
1430 // 32-bits of a 64-bit register, but are needed in low bits of another | |
1431 // register (else it's a hi-bits-to-hi-bits copy which should have | |
1432 // happened already as part of a 64-bit move) | |
1433 if( src_second_rc == rc_int && dst_second_rc == rc_int ) { | |
1434 assert( (src_second&1)==1, "its the evil O0/O1 native return case" ); | |
1435 assert( (dst_second&1)==0, "should have moved with 1 64-bit move" ); | |
1436 // Shift src_second down to dst_second's low bits. | |
1437 if( cbuf ) { | |
1438 emit3_simm13( *cbuf, Assembler::arith_op, Matcher::_regEncode[dst_second], Assembler::srlx_op3, Matcher::_regEncode[src_second-1], 0x1020 ); | |
1439 #ifndef PRODUCT | |
1440 } else if( !do_size ) { | |
1441 if( size != 0 ) st->print("\n\t"); | |
1442 st->print("SRLX R_%s,32,R_%s\t! spill: Move high bits down low",OptoReg::regname(src_second-1),OptoReg::regname(dst_second)); | |
1443 #endif | |
1444 } | |
1445 return size+4; | |
1446 } | |
1447 | |
1448 // Check for high word integer store. Must down-shift the hi bits | |
1449 // into a temp register, then fall into the case of storing int bits. | |
1450 if( src_second_rc == rc_int && dst_second_rc == rc_stack && (src_second&1)==1 ) { | |
1451 // Shift src_second down to dst_second's low bits. | |
1452 if( cbuf ) { | |
1453 emit3_simm13( *cbuf, Assembler::arith_op, Matcher::_regEncode[R_O7_num], Assembler::srlx_op3, Matcher::_regEncode[src_second-1], 0x1020 ); | |
1454 #ifndef PRODUCT | |
1455 } else if( !do_size ) { | |
1456 if( size != 0 ) st->print("\n\t"); | |
1457 st->print("SRLX R_%s,32,R_%s\t! spill: Move high bits down low",OptoReg::regname(src_second-1),OptoReg::regname(R_O7_num)); | |
1458 #endif | |
1459 } | |
1460 size+=4; | |
1461 src_second = OptoReg::Name(R_O7_num); // Not R_O7H_num! | |
1462 } | |
1463 | |
1464 // Check for high word integer load | |
1465 if( dst_second_rc == rc_int && src_second_rc == rc_stack ) | |
1466 return impl_helper(this,cbuf,ra_,do_size,true ,ra_->reg2offset(src_second),dst_second,Assembler::lduw_op3,"LDUW",size, st); | |
1467 | |
1468 // Check for high word integer store | |
1469 if( src_second_rc == rc_int && dst_second_rc == rc_stack ) | |
1470 return impl_helper(this,cbuf,ra_,do_size,false,ra_->reg2offset(dst_second),src_second,Assembler::stw_op3 ,"STW ",size, st); | |
1471 | |
1472 // Check for high word float store | |
1473 if( src_second_rc == rc_float && dst_second_rc == rc_stack ) | |
1474 return impl_helper(this,cbuf,ra_,do_size,false,ra_->reg2offset(dst_second),src_second,Assembler::stf_op3 ,"STF ",size, st); | |
1475 | |
1476 #endif // !_LP64 | |
1477 | |
1478 Unimplemented(); | |
1479 } | |
1480 | |
1481 #ifndef PRODUCT | |
1482 void MachSpillCopyNode::format( PhaseRegAlloc *ra_, outputStream *st ) const { | |
1483 implementation( NULL, ra_, false, st ); | |
1484 } | |
1485 #endif | |
1486 | |
1487 void MachSpillCopyNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const { | |
1488 implementation( &cbuf, ra_, false, NULL ); | |
1489 } | |
1490 | |
1491 uint MachSpillCopyNode::size(PhaseRegAlloc *ra_) const { | |
1492 return implementation( NULL, ra_, true, NULL ); | |
1493 } | |
1494 | |
1495 //============================================================================= | |
1496 #ifndef PRODUCT | |
1497 void MachNopNode::format( PhaseRegAlloc *, outputStream *st ) const { | |
1498 st->print("NOP \t# %d bytes pad for loops and calls", 4 * _count); | |
1499 } | |
1500 #endif | |
1501 | |
1502 void MachNopNode::emit(CodeBuffer &cbuf, PhaseRegAlloc * ) const { | |
1503 MacroAssembler _masm(&cbuf); | |
1504 for(int i = 0; i < _count; i += 1) { | |
1505 __ nop(); | |
1506 } | |
1507 } | |
1508 | |
1509 uint MachNopNode::size(PhaseRegAlloc *ra_) const { | |
1510 return 4 * _count; | |
1511 } | |
1512 | |
1513 | |
1514 //============================================================================= | |
1515 #ifndef PRODUCT | |
1516 void BoxLockNode::format( PhaseRegAlloc *ra_, outputStream *st ) const { | |
1517 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem()); | |
1518 int reg = ra_->get_reg_first(this); | |
1519 st->print("LEA [R_SP+#%d+BIAS],%s",offset,Matcher::regName[reg]); | |
1520 } | |
1521 #endif | |
1522 | |
1523 void BoxLockNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const { | |
1524 MacroAssembler _masm(&cbuf); | |
1525 int offset = ra_->reg2offset(in_RegMask(0).find_first_elem()) + STACK_BIAS; | |
1526 int reg = ra_->get_encode(this); | |
1527 | |
1528 if (Assembler::is_simm13(offset)) { | |
1529 __ add(SP, offset, reg_to_register_object(reg)); | |
1530 } else { | |
1531 __ set(offset, O7); | |
1532 __ add(SP, O7, reg_to_register_object(reg)); | |
1533 } | |
1534 } | |
1535 | |
1536 uint BoxLockNode::size(PhaseRegAlloc *ra_) const { | |
1537 // BoxLockNode is not a MachNode, so we can't just call MachNode::size(ra_) | |
1538 assert(ra_ == ra_->C->regalloc(), "sanity"); | |
1539 return ra_->C->scratch_emit_size(this); | |
1540 } | |
1541 | |
1542 //============================================================================= | |
1543 | |
1544 // emit call stub, compiled java to interpretor | |
1545 void emit_java_to_interp(CodeBuffer &cbuf ) { | |
1546 | |
1547 // Stub is fixed up when the corresponding call is converted from calling | |
1548 // compiled code to calling interpreted code. | |
1549 // set (empty), G5 | |
1550 // jmp -1 | |
1551 | |
1552 address mark = cbuf.inst_mark(); // get mark within main instrs section | |
1553 | |
1554 MacroAssembler _masm(&cbuf); | |
1555 | |
1556 address base = | |
1557 __ start_a_stub(Compile::MAX_stubs_size); | |
1558 if (base == NULL) return; // CodeBuffer::expand failed | |
1559 | |
1560 // static stub relocation stores the instruction address of the call | |
1561 __ relocate(static_stub_Relocation::spec(mark)); | |
1562 | |
1563 __ set_oop(NULL, reg_to_register_object(Matcher::inline_cache_reg_encode())); | |
1564 | |
1565 __ set_inst_mark(); | |
1566 Address a(G3, (address)-1); | |
1567 __ JUMP(a, 0); | |
1568 | |
1569 __ delayed()->nop(); | |
1570 | |
1571 // Update current stubs pointer and restore code_end. | |
1572 __ end_a_stub(); | |
1573 } | |
1574 | |
1575 // size of call stub, compiled java to interpretor | |
1576 uint size_java_to_interp() { | |
1577 // This doesn't need to be accurate but it must be larger or equal to | |
1578 // the real size of the stub. | |
1579 return (NativeMovConstReg::instruction_size + // sethi/setlo; | |
1580 NativeJump::instruction_size + // sethi; jmp; nop | |
1581 (TraceJumps ? 20 * BytesPerInstWord : 0) ); | |
1582 } | |
1583 // relocation entries for call stub, compiled java to interpretor | |
1584 uint reloc_java_to_interp() { | |
1585 return 10; // 4 in emit_java_to_interp + 1 in Java_Static_Call | |
1586 } | |
1587 | |
1588 | |
1589 //============================================================================= | |
1590 #ifndef PRODUCT | |
1591 void MachUEPNode::format( PhaseRegAlloc *ra_, outputStream *st ) const { | |
1592 st->print_cr("\nUEP:"); | |
1593 #ifdef _LP64 | |
1594 st->print_cr("\tLDX [R_O0 + oopDesc::klass_offset_in_bytes],R_G5\t! Inline cache check"); | |
1595 st->print_cr("\tCMP R_G5,R_G3" ); | |
1596 st->print ("\tTne xcc,R_G0+ST_RESERVED_FOR_USER_0+2"); | |
1597 #else // _LP64 | |
1598 st->print_cr("\tLDUW [R_O0 + oopDesc::klass_offset_in_bytes],R_G5\t! Inline cache check"); | |
1599 st->print_cr("\tCMP R_G5,R_G3" ); | |
1600 st->print ("\tTne icc,R_G0+ST_RESERVED_FOR_USER_0+2"); | |
1601 #endif // _LP64 | |
1602 } | |
1603 #endif | |
1604 | |
1605 void MachUEPNode::emit(CodeBuffer &cbuf, PhaseRegAlloc *ra_) const { | |
1606 MacroAssembler _masm(&cbuf); | |
1607 Label L; | |
1608 Register G5_ic_reg = reg_to_register_object(Matcher::inline_cache_reg_encode()); | |
1609 Register temp_reg = G3; | |
1610 assert( G5_ic_reg != temp_reg, "conflicting registers" ); | |
1611 | |
1612 // Load klass from reciever | |
1613 __ ld_ptr(O0, oopDesc::klass_offset_in_bytes(), temp_reg); | |
1614 // Compare against expected klass | |
1615 __ cmp(temp_reg, G5_ic_reg); | |
1616 // Branch to miss code, checks xcc or icc depending | |
1617 __ trap(Assembler::notEqual, Assembler::ptr_cc, G0, ST_RESERVED_FOR_USER_0+2); | |
1618 } | |
1619 | |
1620 uint MachUEPNode::size(PhaseRegAlloc *ra_) const { | |
1621 return MachNode::size(ra_); | |
1622 } | |
1623 | |
1624 | |
1625 //============================================================================= | |
1626 | |
1627 uint size_exception_handler() { | |
1628 if (TraceJumps) { | |
1629 return (400); // just a guess | |
1630 } | |
1631 return ( NativeJump::instruction_size ); // sethi;jmp;nop | |
1632 } | |
1633 | |
1634 uint size_deopt_handler() { | |
1635 if (TraceJumps) { | |
1636 return (400); // just a guess | |
1637 } | |
1638 return ( 4+ NativeJump::instruction_size ); // save;sethi;jmp;restore | |
1639 } | |
1640 | |
1641 // Emit exception handler code. | |
1642 int emit_exception_handler(CodeBuffer& cbuf) { | |
1643 Register temp_reg = G3; | |
1644 Address exception_blob(temp_reg, OptoRuntime::exception_blob()->instructions_begin()); | |
1645 MacroAssembler _masm(&cbuf); | |
1646 | |
1647 address base = | |
1648 __ start_a_stub(size_exception_handler()); | |
1649 if (base == NULL) return 0; // CodeBuffer::expand failed | |
1650 | |
1651 int offset = __ offset(); | |
1652 | |
1653 __ JUMP(exception_blob, 0); // sethi;jmp | |
1654 __ delayed()->nop(); | |
1655 | |
1656 assert(__ offset() - offset <= (int) size_exception_handler(), "overflow"); | |
1657 | |
1658 __ end_a_stub(); | |
1659 | |
1660 return offset; | |
1661 } | |
1662 | |
1663 int emit_deopt_handler(CodeBuffer& cbuf) { | |
1664 // Can't use any of the current frame's registers as we may have deopted | |
1665 // at a poll and everything (including G3) can be live. | |
1666 Register temp_reg = L0; | |
1667 Address deopt_blob(temp_reg, SharedRuntime::deopt_blob()->unpack()); | |
1668 MacroAssembler _masm(&cbuf); | |
1669 | |
1670 address base = | |
1671 __ start_a_stub(size_deopt_handler()); | |
1672 if (base == NULL) return 0; // CodeBuffer::expand failed | |
1673 | |
1674 int offset = __ offset(); | |
1675 __ save_frame(0); | |
1676 __ JUMP(deopt_blob, 0); // sethi;jmp | |
1677 __ delayed()->restore(); | |
1678 | |
1679 assert(__ offset() - offset <= (int) size_deopt_handler(), "overflow"); | |
1680 | |
1681 __ end_a_stub(); | |
1682 return offset; | |
1683 | |
1684 } | |
1685 | |
1686 // Given a register encoding, produce a Integer Register object | |
1687 static Register reg_to_register_object(int register_encoding) { | |
1688 assert(L5->encoding() == R_L5_enc && G1->encoding() == R_G1_enc, "right coding"); | |
1689 return as_Register(register_encoding); | |
1690 } | |
1691 | |
1692 // Given a register encoding, produce a single-precision Float Register object | |
1693 static FloatRegister reg_to_SingleFloatRegister_object(int register_encoding) { | |
1694 assert(F5->encoding(FloatRegisterImpl::S) == R_F5_enc && F12->encoding(FloatRegisterImpl::S) == R_F12_enc, "right coding"); | |
1695 return as_SingleFloatRegister(register_encoding); | |
1696 } | |
1697 | |
1698 // Given a register encoding, produce a double-precision Float Register object | |
1699 static FloatRegister reg_to_DoubleFloatRegister_object(int register_encoding) { | |
1700 assert(F4->encoding(FloatRegisterImpl::D) == R_F4_enc, "right coding"); | |
1701 assert(F32->encoding(FloatRegisterImpl::D) == R_D32_enc, "right coding"); | |
1702 return as_DoubleFloatRegister(register_encoding); | |
1703 } | |
1704 | |
1705 int Matcher::regnum_to_fpu_offset(int regnum) { | |
1706 return regnum - 32; // The FP registers are in the second chunk | |
1707 } | |
1708 | |
1709 #ifdef ASSERT | |
1710 address last_rethrow = NULL; // debugging aid for Rethrow encoding | |
1711 #endif | |
1712 | |
1713 // Vector width in bytes | |
1714 const uint Matcher::vector_width_in_bytes(void) { | |
1715 return 8; | |
1716 } | |
1717 | |
1718 // Vector ideal reg | |
1719 const uint Matcher::vector_ideal_reg(void) { | |
1720 return Op_RegD; | |
1721 } | |
1722 | |
1723 // USII supports fxtof through the whole range of number, USIII doesn't | |
1724 const bool Matcher::convL2FSupported(void) { | |
1725 return VM_Version::has_fast_fxtof(); | |
1726 } | |
1727 | |
1728 // Is this branch offset short enough that a short branch can be used? | |
1729 // | |
1730 // NOTE: If the platform does not provide any short branch variants, then | |
1731 // this method should return false for offset 0. | |
1732 bool Matcher::is_short_branch_offset(int offset) { | |
1733 return false; | |
1734 } | |
1735 | |
1736 const bool Matcher::isSimpleConstant64(jlong value) { | |
1737 // Will one (StoreL ConL) be cheaper than two (StoreI ConI)?. | |
1738 // Depends on optimizations in MacroAssembler::setx. | |
1739 int hi = (int)(value >> 32); | |
1740 int lo = (int)(value & ~0); | |
1741 return (hi == 0) || (hi == -1) || (lo == 0); | |
1742 } | |
1743 | |
1744 // No scaling for the parameter the ClearArray node. | |
1745 const bool Matcher::init_array_count_is_in_bytes = true; | |
1746 | |
1747 // Threshold size for cleararray. | |
1748 const int Matcher::init_array_short_size = 8 * BytesPerLong; | |
1749 | |
1750 // Should the Matcher clone shifts on addressing modes, expecting them to | |
1751 // be subsumed into complex addressing expressions or compute them into | |
1752 // registers? True for Intel but false for most RISCs | |
1753 const bool Matcher::clone_shift_expressions = false; | |
1754 | |
1755 // Is it better to copy float constants, or load them directly from memory? | |
1756 // Intel can load a float constant from a direct address, requiring no | |
1757 // extra registers. Most RISCs will have to materialize an address into a | |
1758 // register first, so they would do better to copy the constant from stack. | |
1759 const bool Matcher::rematerialize_float_constants = false; | |
1760 | |
1761 // If CPU can load and store mis-aligned doubles directly then no fixup is | |
1762 // needed. Else we split the double into 2 integer pieces and move it | |
1763 // piece-by-piece. Only happens when passing doubles into C code as the | |
1764 // Java calling convention forces doubles to be aligned. | |
1765 #ifdef _LP64 | |
1766 const bool Matcher::misaligned_doubles_ok = true; | |
1767 #else | |
1768 const bool Matcher::misaligned_doubles_ok = false; | |
1769 #endif | |
1770 | |
1771 // No-op on SPARC. | |
1772 void Matcher::pd_implicit_null_fixup(MachNode *node, uint idx) { | |
1773 } | |
1774 | |
1775 // Advertise here if the CPU requires explicit rounding operations | |
1776 // to implement the UseStrictFP mode. | |
1777 const bool Matcher::strict_fp_requires_explicit_rounding = false; | |
1778 | |
1779 // Do floats take an entire double register or just half? | |
1780 const bool Matcher::float_in_double = false; | |
1781 | |
1782 // Do ints take an entire long register or just half? | |
1783 // Note that we if-def off of _LP64. | |
1784 // The relevant question is how the int is callee-saved. In _LP64 | |
1785 // the whole long is written but de-opt'ing will have to extract | |
1786 // the relevant 32 bits, in not-_LP64 only the low 32 bits is written. | |
1787 #ifdef _LP64 | |
1788 const bool Matcher::int_in_long = true; | |
1789 #else | |
1790 const bool Matcher::int_in_long = false; | |
1791 #endif | |
1792 | |
1793 // Return whether or not this register is ever used as an argument. This | |
1794 // function is used on startup to build the trampoline stubs in generateOptoStub. | |
1795 // Registers not mentioned will be killed by the VM call in the trampoline, and | |
1796 // arguments in those registers not be available to the callee. | |
1797 bool Matcher::can_be_java_arg( int reg ) { | |
1798 // Standard sparc 6 args in registers | |
1799 if( reg == R_I0_num || | |
1800 reg == R_I1_num || | |
1801 reg == R_I2_num || | |
1802 reg == R_I3_num || | |
1803 reg == R_I4_num || | |
1804 reg == R_I5_num ) return true; | |
1805 #ifdef _LP64 | |
1806 // 64-bit builds can pass 64-bit pointers and longs in | |
1807 // the high I registers | |
1808 if( reg == R_I0H_num || | |
1809 reg == R_I1H_num || | |
1810 reg == R_I2H_num || | |
1811 reg == R_I3H_num || | |
1812 reg == R_I4H_num || | |
1813 reg == R_I5H_num ) return true; | |
1814 #else | |
1815 // 32-bit builds with longs-in-one-entry pass longs in G1 & G4. | |
1816 // Longs cannot be passed in O regs, because O regs become I regs | |
1817 // after a 'save' and I regs get their high bits chopped off on | |
1818 // interrupt. | |
1819 if( reg == R_G1H_num || reg == R_G1_num ) return true; | |
1820 if( reg == R_G4H_num || reg == R_G4_num ) return true; | |
1821 #endif | |
1822 // A few float args in registers | |
1823 if( reg >= R_F0_num && reg <= R_F7_num ) return true; | |
1824 | |
1825 return false; | |
1826 } | |
1827 | |
1828 bool Matcher::is_spillable_arg( int reg ) { | |
1829 return can_be_java_arg(reg); | |
1830 } | |
1831 | |
1832 // Register for DIVI projection of divmodI | |
1833 RegMask Matcher::divI_proj_mask() { | |
1834 ShouldNotReachHere(); | |
1835 return RegMask(); | |
1836 } | |
1837 | |
1838 // Register for MODI projection of divmodI | |
1839 RegMask Matcher::modI_proj_mask() { | |
1840 ShouldNotReachHere(); | |
1841 return RegMask(); | |
1842 } | |
1843 | |
1844 // Register for DIVL projection of divmodL | |
1845 RegMask Matcher::divL_proj_mask() { | |
1846 ShouldNotReachHere(); | |
1847 return RegMask(); | |
1848 } | |
1849 | |
1850 // Register for MODL projection of divmodL | |
1851 RegMask Matcher::modL_proj_mask() { | |
1852 ShouldNotReachHere(); | |
1853 return RegMask(); | |
1854 } | |
1855 | |
1856 %} | |
1857 | |
1858 | |
1859 // The intptr_t operand types, defined by textual substitution. | |
1860 // (Cf. opto/type.hpp. This lets us avoid many, many other ifdefs.) | |
1861 #ifdef _LP64 | |
1862 #define immX immL | |
1863 #define immX13 immL13 | |
1864 #define iRegX iRegL | |
1865 #define g1RegX g1RegL | |
1866 #else | |
1867 #define immX immI | |
1868 #define immX13 immI13 | |
1869 #define iRegX iRegI | |
1870 #define g1RegX g1RegI | |
1871 #endif | |
1872 | |
1873 //----------ENCODING BLOCK----------------------------------------------------- | |
1874 // This block specifies the encoding classes used by the compiler to output | |
1875 // byte streams. Encoding classes are parameterized macros used by | |
1876 // Machine Instruction Nodes in order to generate the bit encoding of the | |
1877 // instruction. Operands specify their base encoding interface with the | |
1878 // interface keyword. There are currently supported four interfaces, | |
1879 // REG_INTER, CONST_INTER, MEMORY_INTER, & COND_INTER. REG_INTER causes an | |
1880 // operand to generate a function which returns its register number when | |
1881 // queried. CONST_INTER causes an operand to generate a function which | |
1882 // returns the value of the constant when queried. MEMORY_INTER causes an | |
1883 // operand to generate four functions which return the Base Register, the | |
1884 // Index Register, the Scale Value, and the Offset Value of the operand when | |
1885 // queried. COND_INTER causes an operand to generate six functions which | |
1886 // return the encoding code (ie - encoding bits for the instruction) | |
1887 // associated with each basic boolean condition for a conditional instruction. | |
1888 // | |
1889 // Instructions specify two basic values for encoding. Again, a function | |
1890 // is available to check if the constant displacement is an oop. They use the | |
1891 // ins_encode keyword to specify their encoding classes (which must be | |
1892 // a sequence of enc_class names, and their parameters, specified in | |
1893 // the encoding block), and they use the | |
1894 // opcode keyword to specify, in order, their primary, secondary, and | |
1895 // tertiary opcode. Only the opcode sections which a particular instruction | |
1896 // needs for encoding need to be specified. | |
1897 encode %{ | |
1898 enc_class enc_untested %{ | |
1899 #ifdef ASSERT | |
1900 MacroAssembler _masm(&cbuf); | |
1901 __ untested("encoding"); | |
1902 #endif | |
1903 %} | |
1904 | |
1905 enc_class form3_mem_reg( memory mem, iRegI dst ) %{ | |
1906 emit_form3_mem_reg(cbuf, this, $primary, $tertiary, | |
1907 $mem$$base, $mem$$disp, $mem$$index, $dst$$reg); | |
1908 %} | |
1909 | |
1910 enc_class form3_mem_reg_little( memory mem, iRegI dst) %{ | |
1911 emit_form3_mem_reg_asi(cbuf, this, $primary, $tertiary, | |
1912 $mem$$base, $mem$$disp, $mem$$index, $dst$$reg, Assembler::ASI_PRIMARY_LITTLE); | |
1913 %} | |
1914 | |
1915 enc_class form3_mem_prefetch_read( memory mem ) %{ | |
1916 emit_form3_mem_reg(cbuf, this, $primary, $tertiary, | |
1917 $mem$$base, $mem$$disp, $mem$$index, 0/*prefetch function many-reads*/); | |
1918 %} | |
1919 | |
1920 enc_class form3_mem_prefetch_write( memory mem ) %{ | |
1921 emit_form3_mem_reg(cbuf, this, $primary, $tertiary, | |
1922 $mem$$base, $mem$$disp, $mem$$index, 2/*prefetch function many-writes*/); | |
1923 %} | |
1924 | |
1925 enc_class form3_mem_reg_long_unaligned_marshal( memory mem, iRegL reg ) %{ | |
1926 assert( Assembler::is_simm13($mem$$disp ), "need disp and disp+4" ); | |
1927 assert( Assembler::is_simm13($mem$$disp+4), "need disp and disp+4" ); | |
1928 guarantee($mem$$index == R_G0_enc, "double index?"); | |
1929 emit_form3_mem_reg(cbuf, this, $primary, $tertiary, $mem$$base, $mem$$disp+4, R_G0_enc, R_O7_enc ); | |
1930 emit_form3_mem_reg(cbuf, this, $primary, $tertiary, $mem$$base, $mem$$disp, R_G0_enc, $reg$$reg ); | |
1931 emit3_simm13( cbuf, Assembler::arith_op, $reg$$reg, Assembler::sllx_op3, $reg$$reg, 0x1020 ); | |
1932 emit3( cbuf, Assembler::arith_op, $reg$$reg, Assembler::or_op3, $reg$$reg, 0, R_O7_enc ); | |
1933 %} | |
1934 | |
1935 enc_class form3_mem_reg_double_unaligned( memory mem, RegD_low reg ) %{ | |
1936 assert( Assembler::is_simm13($mem$$disp ), "need disp and disp+4" ); | |
1937 assert( Assembler::is_simm13($mem$$disp+4), "need disp and disp+4" ); | |
1938 guarantee($mem$$index == R_G0_enc, "double index?"); | |
1939 // Load long with 2 instructions | |
1940 emit_form3_mem_reg(cbuf, this, $primary, $tertiary, $mem$$base, $mem$$disp, R_G0_enc, $reg$$reg+0 ); | |
1941 emit_form3_mem_reg(cbuf, this, $primary, $tertiary, $mem$$base, $mem$$disp+4, R_G0_enc, $reg$$reg+1 ); | |
1942 %} | |
1943 | |
1944 //%%% form3_mem_plus_4_reg is a hack--get rid of it | |
1945 enc_class form3_mem_plus_4_reg( memory mem, iRegI dst ) %{ | |
1946 guarantee($mem$$disp, "cannot offset a reg-reg operand by 4"); | |
1947 emit_form3_mem_reg(cbuf, this, $primary, $tertiary, $mem$$base, $mem$$disp + 4, $mem$$index, $dst$$reg); | |
1948 %} | |
1949 | |
1950 enc_class form3_g0_rs2_rd_move( iRegI rs2, iRegI rd ) %{ | |
1951 // Encode a reg-reg copy. If it is useless, then empty encoding. | |
1952 if( $rs2$$reg != $rd$$reg ) | |
1953 emit3( cbuf, Assembler::arith_op, $rd$$reg, Assembler::or_op3, 0, 0, $rs2$$reg ); | |
1954 %} | |
1955 | |
1956 // Target lo half of long | |
1957 enc_class form3_g0_rs2_rd_move_lo( iRegI rs2, iRegL rd ) %{ | |
1958 // Encode a reg-reg copy. If it is useless, then empty encoding. | |
1959 if( $rs2$$reg != LONG_LO_REG($rd$$reg) ) | |
1960 emit3( cbuf, Assembler::arith_op, LONG_LO_REG($rd$$reg), Assembler::or_op3, 0, 0, $rs2$$reg ); | |
1961 %} | |
1962 | |
1963 // Source lo half of long | |
1964 enc_class form3_g0_rs2_rd_move_lo2( iRegL rs2, iRegI rd ) %{ | |
1965 // Encode a reg-reg copy. If it is useless, then empty encoding. | |
1966 if( LONG_LO_REG($rs2$$reg) != $rd$$reg ) | |
1967 emit3( cbuf, Assembler::arith_op, $rd$$reg, Assembler::or_op3, 0, 0, LONG_LO_REG($rs2$$reg) ); | |
1968 %} | |
1969 | |
1970 // Target hi half of long | |
1971 enc_class form3_rs1_rd_copysign_hi( iRegI rs1, iRegL rd ) %{ | |
1972 emit3_simm13( cbuf, Assembler::arith_op, $rd$$reg, Assembler::sra_op3, $rs1$$reg, 31 ); | |
1973 %} | |
1974 | |
1975 // Source lo half of long, and leave it sign extended. | |
1976 enc_class form3_rs1_rd_signextend_lo1( iRegL rs1, iRegI rd ) %{ | |
1977 // Sign extend low half | |
1978 emit3( cbuf, Assembler::arith_op, $rd$$reg, Assembler::sra_op3, $rs1$$reg, 0, 0 ); | |
1979 %} | |
1980 | |
1981 // Source hi half of long, and leave it sign extended. | |
1982 enc_class form3_rs1_rd_copy_hi1( iRegL rs1, iRegI rd ) %{ | |
1983 // Shift high half to low half | |
1984 emit3_simm13( cbuf, Assembler::arith_op, $rd$$reg, Assembler::srlx_op3, $rs1$$reg, 32 ); | |
1985 %} | |
1986 | |
1987 // Source hi half of long | |
1988 enc_class form3_g0_rs2_rd_move_hi2( iRegL rs2, iRegI rd ) %{ | |
1989 // Encode a reg-reg copy. If it is useless, then empty encoding. | |
1990 if( LONG_HI_REG($rs2$$reg) != $rd$$reg ) | |
1991 emit3( cbuf, Assembler::arith_op, $rd$$reg, Assembler::or_op3, 0, 0, LONG_HI_REG($rs2$$reg) ); | |
1992 %} | |
1993 | |
1994 enc_class form3_rs1_rs2_rd( iRegI rs1, iRegI rs2, iRegI rd ) %{ | |
1995 emit3( cbuf, $secondary, $rd$$reg, $primary, $rs1$$reg, 0, $rs2$$reg ); | |
1996 %} | |
1997 | |
1998 enc_class enc_to_bool( iRegI src, iRegI dst ) %{ | |
1999 emit3 ( cbuf, Assembler::arith_op, 0, Assembler::subcc_op3, 0, 0, $src$$reg ); | |
2000 emit3_simm13( cbuf, Assembler::arith_op, $dst$$reg, Assembler::addc_op3 , 0, 0 ); | |
2001 %} | |
2002 | |
2003 enc_class enc_ltmask( iRegI p, iRegI q, iRegI dst ) %{ | |
2004 emit3 ( cbuf, Assembler::arith_op, 0, Assembler::subcc_op3, $p$$reg, 0, $q$$reg ); | |
2005 // clear if nothing else is happening | |
2006 emit3_simm13( cbuf, Assembler::arith_op, $dst$$reg, Assembler::or_op3, 0, 0 ); | |
2007 // blt,a,pn done | |
2008 emit2_19 ( cbuf, Assembler::branch_op, 1/*annul*/, Assembler::less, Assembler::bp_op2, Assembler::icc, 0/*predict not taken*/, 2 ); | |
2009 // mov dst,-1 in delay slot | |
2010 emit3_simm13( cbuf, Assembler::arith_op, $dst$$reg, Assembler::or_op3, 0, -1 ); | |
2011 %} | |
2012 | |
2013 enc_class form3_rs1_imm5_rd( iRegI rs1, immU5 imm5, iRegI rd ) %{ | |
2014 emit3_simm13( cbuf, $secondary, $rd$$reg, $primary, $rs1$$reg, $imm5$$constant & 0x1F ); | |
2015 %} | |
2016 | |
2017 enc_class form3_sd_rs1_imm6_rd( iRegL rs1, immU6 imm6, iRegL rd ) %{ | |
2018 emit3_simm13( cbuf, $secondary, $rd$$reg, $primary, $rs1$$reg, ($imm6$$constant & 0x3F) | 0x1000 ); | |
2019 %} | |
2020 | |
2021 enc_class form3_sd_rs1_rs2_rd( iRegL rs1, iRegI rs2, iRegL rd ) %{ | |
2022 emit3( cbuf, $secondary, $rd$$reg, $primary, $rs1$$reg, 0x80, $rs2$$reg ); | |
2023 %} | |
2024 | |
2025 enc_class form3_rs1_simm13_rd( iRegI rs1, immI13 simm13, iRegI rd ) %{ | |
2026 emit3_simm13( cbuf, $secondary, $rd$$reg, $primary, $rs1$$reg, $simm13$$constant ); | |
2027 %} | |
2028 | |
2029 enc_class move_return_pc_to_o1() %{ | |
2030 emit3_simm13( cbuf, Assembler::arith_op, R_O1_enc, Assembler::add_op3, R_O7_enc, frame::pc_return_offset ); | |
2031 %} | |
2032 | |
2033 #ifdef _LP64 | |
2034 /* %%% merge with enc_to_bool */ | |
2035 enc_class enc_convP2B( iRegI dst, iRegP src ) %{ | |
2036 MacroAssembler _masm(&cbuf); | |
2037 | |
2038 Register src_reg = reg_to_register_object($src$$reg); | |
2039 Register dst_reg = reg_to_register_object($dst$$reg); | |
2040 __ movr(Assembler::rc_nz, src_reg, 1, dst_reg); | |
2041 %} | |
2042 #endif | |
2043 | |
2044 enc_class enc_cadd_cmpLTMask( iRegI p, iRegI q, iRegI y, iRegI tmp ) %{ | |
2045 // (Set p (AddI (AndI (CmpLTMask p q) y) (SubI p q))) | |
2046 MacroAssembler _masm(&cbuf); | |
2047 | |
2048 Register p_reg = reg_to_register_object($p$$reg); | |
2049 Register q_reg = reg_to_register_object($q$$reg); | |
2050 Register y_reg = reg_to_register_object($y$$reg); | |
2051 Register tmp_reg = reg_to_register_object($tmp$$reg); | |
2052 | |
2053 __ subcc( p_reg, q_reg, p_reg ); | |
2054 __ add ( p_reg, y_reg, tmp_reg ); | |
2055 __ movcc( Assembler::less, false, Assembler::icc, tmp_reg, p_reg ); | |
2056 %} | |
2057 | |
2058 enc_class form_d2i_helper(regD src, regF dst) %{ | |
2059 // fcmp %fcc0,$src,$src | |
2060 emit3( cbuf, Assembler::arith_op , Assembler::fcc0, Assembler::fpop2_op3, $src$$reg, Assembler::fcmpd_opf, $src$$reg ); | |
2061 // branch %fcc0 not-nan, predict taken | |
2062 emit2_19( cbuf, Assembler::branch_op, 0/*annul*/, Assembler::f_ordered, Assembler::fbp_op2, Assembler::fcc0, 1/*predict taken*/, 4 ); | |
2063 // fdtoi $src,$dst | |
2064 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, 0, Assembler::fdtoi_opf, $src$$reg ); | |
2065 // fitos $dst,$dst (if nan) | |
2066 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, 0, Assembler::fitos_opf, $dst$$reg ); | |
2067 // clear $dst (if nan) | |
2068 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, $dst$$reg, Assembler::fsubs_opf, $dst$$reg ); | |
2069 // carry on here... | |
2070 %} | |
2071 | |
2072 enc_class form_d2l_helper(regD src, regD dst) %{ | |
2073 // fcmp %fcc0,$src,$src check for NAN | |
2074 emit3( cbuf, Assembler::arith_op , Assembler::fcc0, Assembler::fpop2_op3, $src$$reg, Assembler::fcmpd_opf, $src$$reg ); | |
2075 // branch %fcc0 not-nan, predict taken | |
2076 emit2_19( cbuf, Assembler::branch_op, 0/*annul*/, Assembler::f_ordered, Assembler::fbp_op2, Assembler::fcc0, 1/*predict taken*/, 4 ); | |
2077 // fdtox $src,$dst convert in delay slot | |
2078 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, 0, Assembler::fdtox_opf, $src$$reg ); | |
2079 // fxtod $dst,$dst (if nan) | |
2080 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, 0, Assembler::fxtod_opf, $dst$$reg ); | |
2081 // clear $dst (if nan) | |
2082 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, $dst$$reg, Assembler::fsubd_opf, $dst$$reg ); | |
2083 // carry on here... | |
2084 %} | |
2085 | |
2086 enc_class form_f2i_helper(regF src, regF dst) %{ | |
2087 // fcmps %fcc0,$src,$src | |
2088 emit3( cbuf, Assembler::arith_op , Assembler::fcc0, Assembler::fpop2_op3, $src$$reg, Assembler::fcmps_opf, $src$$reg ); | |
2089 // branch %fcc0 not-nan, predict taken | |
2090 emit2_19( cbuf, Assembler::branch_op, 0/*annul*/, Assembler::f_ordered, Assembler::fbp_op2, Assembler::fcc0, 1/*predict taken*/, 4 ); | |
2091 // fstoi $src,$dst | |
2092 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, 0, Assembler::fstoi_opf, $src$$reg ); | |
2093 // fitos $dst,$dst (if nan) | |
2094 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, 0, Assembler::fitos_opf, $dst$$reg ); | |
2095 // clear $dst (if nan) | |
2096 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, $dst$$reg, Assembler::fsubs_opf, $dst$$reg ); | |
2097 // carry on here... | |
2098 %} | |
2099 | |
2100 enc_class form_f2l_helper(regF src, regD dst) %{ | |
2101 // fcmps %fcc0,$src,$src | |
2102 emit3( cbuf, Assembler::arith_op , Assembler::fcc0, Assembler::fpop2_op3, $src$$reg, Assembler::fcmps_opf, $src$$reg ); | |
2103 // branch %fcc0 not-nan, predict taken | |
2104 emit2_19( cbuf, Assembler::branch_op, 0/*annul*/, Assembler::f_ordered, Assembler::fbp_op2, Assembler::fcc0, 1/*predict taken*/, 4 ); | |
2105 // fstox $src,$dst | |
2106 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, 0, Assembler::fstox_opf, $src$$reg ); | |
2107 // fxtod $dst,$dst (if nan) | |
2108 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, 0, Assembler::fxtod_opf, $dst$$reg ); | |
2109 // clear $dst (if nan) | |
2110 emit3( cbuf, Assembler::arith_op , $dst$$reg, Assembler::fpop1_op3, $dst$$reg, Assembler::fsubd_opf, $dst$$reg ); | |
2111 // carry on here... | |
2112 %} | |
2113 | |
2114 enc_class form3_opf_rs2F_rdF(regF rs2, regF rd) %{ emit3(cbuf,$secondary,$rd$$reg,$primary,0,$tertiary,$rs2$$reg); %} | |
2115 enc_class form3_opf_rs2F_rdD(regF rs2, regD rd) %{ emit3(cbuf,$secondary,$rd$$reg,$primary,0,$tertiary,$rs2$$reg); %} | |
2116 enc_class form3_opf_rs2D_rdF(regD rs2, regF rd) %{ emit3(cbuf,$secondary,$rd$$reg,$primary,0,$tertiary,$rs2$$reg); %} | |
2117 enc_class form3_opf_rs2D_rdD(regD rs2, regD rd) %{ emit3(cbuf,$secondary,$rd$$reg,$primary,0,$tertiary,$rs2$$reg); %} | |
2118 | |
2119 enc_class form3_opf_rs2D_lo_rdF(regD rs2, regF rd) %{ emit3(cbuf,$secondary,$rd$$reg,$primary,0,$tertiary,$rs2$$reg+1); %} | |
2120 | |
2121 enc_class form3_opf_rs2D_hi_rdD_hi(regD rs2, regD rd) %{ emit3(cbuf,$secondary,$rd$$reg,$primary,0,$tertiary,$rs2$$reg); %} | |
2122 enc_class form3_opf_rs2D_lo_rdD_lo(regD rs2, regD rd) %{ emit3(cbuf,$secondary,$rd$$reg+1,$primary,0,$tertiary,$rs2$$reg+1); %} | |
2123 | |
2124 enc_class form3_opf_rs1F_rs2F_rdF( regF rs1, regF rs2, regF rd ) %{ | |
2125 emit3( cbuf, $secondary, $rd$$reg, $primary, $rs1$$reg, $tertiary, $rs2$$reg ); | |
2126 %} | |
2127 | |
2128 enc_class form3_opf_rs1D_rs2D_rdD( regD rs1, regD rs2, regD rd ) %{ | |
2129 emit3( cbuf, $secondary, $rd$$reg, $primary, $rs1$$reg, $tertiary, $rs2$$reg ); | |
2130 %} | |
2131 | |
2132 enc_class form3_opf_rs1F_rs2F_fcc( regF rs1, regF rs2, flagsRegF fcc ) %{ | |
2133 emit3( cbuf, $secondary, $fcc$$reg, $primary, $rs1$$reg, $tertiary, $rs2$$reg ); | |
2134 %} | |
2135 | |
2136 enc_class form3_opf_rs1D_rs2D_fcc( regD rs1, regD rs2, flagsRegF fcc ) %{ | |
2137 emit3( cbuf, $secondary, $fcc$$reg, $primary, $rs1$$reg, $tertiary, $rs2$$reg ); | |
2138 %} | |
2139 | |
2140 enc_class form3_convI2F(regF rs2, regF rd) %{ | |
2141 emit3(cbuf,Assembler::arith_op,$rd$$reg,Assembler::fpop1_op3,0,$secondary,$rs2$$reg); | |
2142 %} | |
2143 | |
2144 // Encloding class for traceable jumps | |
2145 enc_class form_jmpl(g3RegP dest) %{ | |
2146 emit_jmpl(cbuf, $dest$$reg); | |
2147 %} | |
2148 | |
2149 enc_class form_jmpl_set_exception_pc(g1RegP dest) %{ | |
2150 emit_jmpl_set_exception_pc(cbuf, $dest$$reg); | |
2151 %} | |
2152 | |
2153 enc_class form2_nop() %{ | |
2154 emit_nop(cbuf); | |
2155 %} | |
2156 | |
2157 enc_class form2_illtrap() %{ | |
2158 emit_illtrap(cbuf); | |
2159 %} | |
2160 | |
2161 | |
2162 // Compare longs and convert into -1, 0, 1. | |
2163 enc_class cmpl_flag( iRegL src1, iRegL src2, iRegI dst ) %{ | |
2164 // CMP $src1,$src2 | |
2165 emit3( cbuf, Assembler::arith_op, 0, Assembler::subcc_op3, $src1$$reg, 0, $src2$$reg ); | |
2166 // blt,a,pn done | |
2167 emit2_19( cbuf, Assembler::branch_op, 1/*annul*/, Assembler::less , Assembler::bp_op2, Assembler::xcc, 0/*predict not taken*/, 5 ); | |
2168 // mov dst,-1 in delay slot | |
2169 emit3_simm13( cbuf, Assembler::arith_op, $dst$$reg, Assembler::or_op3, 0, -1 ); | |
2170 // bgt,a,pn done | |
2171 emit2_19( cbuf, Assembler::branch_op, 1/*annul*/, Assembler::greater, Assembler::bp_op2, Assembler::xcc, 0/*predict not taken*/, 3 ); | |
2172 // mov dst,1 in delay slot | |
2173 emit3_simm13( cbuf, Assembler::arith_op, $dst$$reg, Assembler::or_op3, 0, 1 ); | |
2174 // CLR $dst | |
2175 emit3( cbuf, Assembler::arith_op, $dst$$reg, Assembler::or_op3 , 0, 0, 0 ); | |
2176 %} | |
2177 | |
2178 enc_class enc_PartialSubtypeCheck() %{ | |
2179 MacroAssembler _masm(&cbuf); | |
2180 __ call(StubRoutines::Sparc::partial_subtype_check(), relocInfo::runtime_call_type); | |
2181 __ delayed()->nop(); | |
2182 %} | |
2183 | |
2184 enc_class enc_bp( Label labl, cmpOp cmp, flagsReg cc ) %{ | |
2185 MacroAssembler _masm(&cbuf); | |
2186 Label &L = *($labl$$label); | |
2187 Assembler::Predict predict_taken = | |
2188 cbuf.is_backward_branch(L) ? Assembler::pt : Assembler::pn; | |
2189 | |
2190 __ bp( (Assembler::Condition)($cmp$$cmpcode), false, Assembler::icc, predict_taken, L); | |
2191 __ delayed()->nop(); | |
2192 %} | |
2193 | |
2194 enc_class enc_bpl( Label labl, cmpOp cmp, flagsRegL cc ) %{ | |
2195 MacroAssembler _masm(&cbuf); | |
2196 Label &L = *($labl$$label); | |
2197 Assembler::Predict predict_taken = | |
2198 cbuf.is_backward_branch(L) ? Assembler::pt : Assembler::pn; | |
2199 | |
2200 __ bp( (Assembler::Condition)($cmp$$cmpcode), false, Assembler::xcc, predict_taken, L); | |
2201 __ delayed()->nop(); | |
2202 %} | |
2203 | |
2204 enc_class enc_bpx( Label labl, cmpOp cmp, flagsRegP cc ) %{ | |
2205 MacroAssembler _masm(&cbuf); | |
2206 Label &L = *($labl$$label); | |
2207 Assembler::Predict predict_taken = | |
2208 cbuf.is_backward_branch(L) ? Assembler::pt : Assembler::pn; | |
2209 | |
2210 __ bp( (Assembler::Condition)($cmp$$cmpcode), false, Assembler::ptr_cc, predict_taken, L); | |
2211 __ delayed()->nop(); | |
2212 %} | |
2213 | |
2214 enc_class enc_fbp( Label labl, cmpOpF cmp, flagsRegF cc ) %{ | |
2215 MacroAssembler _masm(&cbuf); | |
2216 Label &L = *($labl$$label); | |
2217 Assembler::Predict predict_taken = | |
2218 cbuf.is_backward_branch(L) ? Assembler::pt : Assembler::pn; | |
2219 | |
2220 __ fbp( (Assembler::Condition)($cmp$$cmpcode), false, (Assembler::CC)($cc$$reg), predict_taken, L); | |
2221 __ delayed()->nop(); | |
2222 %} | |
2223 | |
2224 enc_class jump_enc( iRegX switch_val, o7RegI table) %{ | |
2225 MacroAssembler _masm(&cbuf); | |
2226 | |
2227 Register switch_reg = as_Register($switch_val$$reg); | |
2228 Register table_reg = O7; | |
2229 | |
2230 address table_base = __ address_table_constant(_index2label); | |
2231 RelocationHolder rspec = internal_word_Relocation::spec(table_base); | |
2232 | |
2233 // Load table address | |
2234 Address the_pc(table_reg, table_base, rspec); | |
2235 __ load_address(the_pc); | |
2236 | |
2237 // Jump to base address + switch value | |
2238 __ ld_ptr(table_reg, switch_reg, table_reg); | |
2239 __ jmp(table_reg, G0); | |
2240 __ delayed()->nop(); | |
2241 | |
2242 %} | |
2243 | |
2244 enc_class enc_ba( Label labl ) %{ | |
2245 MacroAssembler _masm(&cbuf); | |
2246 Label &L = *($labl$$label); | |
2247 __ ba(false, L); | |
2248 __ delayed()->nop(); | |
2249 %} | |
2250 | |
2251 enc_class enc_bpr( Label labl, cmpOp_reg cmp, iRegI op1 ) %{ | |
2252 MacroAssembler _masm(&cbuf); | |
2253 Label &L = *$labl$$label; | |
2254 Assembler::Predict predict_taken = | |
2255 cbuf.is_backward_branch(L) ? Assembler::pt : Assembler::pn; | |
2256 | |
2257 __ bpr( (Assembler::RCondition)($cmp$$cmpcode), false, predict_taken, as_Register($op1$$reg), L); | |
2258 __ delayed()->nop(); | |
2259 %} | |
2260 | |
2261 enc_class enc_cmov_reg( cmpOp cmp, iRegI dst, iRegI src, immI pcc) %{ | |
2262 int op = (Assembler::arith_op << 30) | | |
2263 ($dst$$reg << 25) | | |
2264 (Assembler::movcc_op3 << 19) | | |
2265 (1 << 18) | // cc2 bit for 'icc' | |
2266 ($cmp$$cmpcode << 14) | | |
2267 (0 << 13) | // select register move | |
2268 ($pcc$$constant << 11) | // cc1, cc0 bits for 'icc' or 'xcc' | |
2269 ($src$$reg << 0); | |
2270 *((int*)(cbuf.code_end())) = op; | |
2271 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2272 %} | |
2273 | |
2274 enc_class enc_cmov_imm( cmpOp cmp, iRegI dst, immI11 src, immI pcc ) %{ | |
2275 int simm11 = $src$$constant & ((1<<11)-1); // Mask to 11 bits | |
2276 int op = (Assembler::arith_op << 30) | | |
2277 ($dst$$reg << 25) | | |
2278 (Assembler::movcc_op3 << 19) | | |
2279 (1 << 18) | // cc2 bit for 'icc' | |
2280 ($cmp$$cmpcode << 14) | | |
2281 (1 << 13) | // select immediate move | |
2282 ($pcc$$constant << 11) | // cc1, cc0 bits for 'icc' | |
2283 (simm11 << 0); | |
2284 *((int*)(cbuf.code_end())) = op; | |
2285 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2286 %} | |
2287 | |
2288 enc_class enc_cmov_reg_f( cmpOpF cmp, iRegI dst, iRegI src, flagsRegF fcc ) %{ | |
2289 int op = (Assembler::arith_op << 30) | | |
2290 ($dst$$reg << 25) | | |
2291 (Assembler::movcc_op3 << 19) | | |
2292 (0 << 18) | // cc2 bit for 'fccX' | |
2293 ($cmp$$cmpcode << 14) | | |
2294 (0 << 13) | // select register move | |
2295 ($fcc$$reg << 11) | // cc1, cc0 bits for fcc0-fcc3 | |
2296 ($src$$reg << 0); | |
2297 *((int*)(cbuf.code_end())) = op; | |
2298 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2299 %} | |
2300 | |
2301 enc_class enc_cmov_imm_f( cmpOp cmp, iRegI dst, immI11 src, flagsRegF fcc ) %{ | |
2302 int simm11 = $src$$constant & ((1<<11)-1); // Mask to 11 bits | |
2303 int op = (Assembler::arith_op << 30) | | |
2304 ($dst$$reg << 25) | | |
2305 (Assembler::movcc_op3 << 19) | | |
2306 (0 << 18) | // cc2 bit for 'fccX' | |
2307 ($cmp$$cmpcode << 14) | | |
2308 (1 << 13) | // select immediate move | |
2309 ($fcc$$reg << 11) | // cc1, cc0 bits for fcc0-fcc3 | |
2310 (simm11 << 0); | |
2311 *((int*)(cbuf.code_end())) = op; | |
2312 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2313 %} | |
2314 | |
2315 enc_class enc_cmovf_reg( cmpOp cmp, regD dst, regD src, immI pcc ) %{ | |
2316 int op = (Assembler::arith_op << 30) | | |
2317 ($dst$$reg << 25) | | |
2318 (Assembler::fpop2_op3 << 19) | | |
2319 (0 << 18) | | |
2320 ($cmp$$cmpcode << 14) | | |
2321 (1 << 13) | // select register move | |
2322 ($pcc$$constant << 11) | // cc1-cc0 bits for 'icc' or 'xcc' | |
2323 ($primary << 5) | // select single, double or quad | |
2324 ($src$$reg << 0); | |
2325 *((int*)(cbuf.code_end())) = op; | |
2326 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2327 %} | |
2328 | |
2329 enc_class enc_cmovff_reg( cmpOpF cmp, flagsRegF fcc, regD dst, regD src ) %{ | |
2330 int op = (Assembler::arith_op << 30) | | |
2331 ($dst$$reg << 25) | | |
2332 (Assembler::fpop2_op3 << 19) | | |
2333 (0 << 18) | | |
2334 ($cmp$$cmpcode << 14) | | |
2335 ($fcc$$reg << 11) | // cc2-cc0 bits for 'fccX' | |
2336 ($primary << 5) | // select single, double or quad | |
2337 ($src$$reg << 0); | |
2338 *((int*)(cbuf.code_end())) = op; | |
2339 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2340 %} | |
2341 | |
2342 // Used by the MIN/MAX encodings. Same as a CMOV, but | |
2343 // the condition comes from opcode-field instead of an argument. | |
2344 enc_class enc_cmov_reg_minmax( iRegI dst, iRegI src ) %{ | |
2345 int op = (Assembler::arith_op << 30) | | |
2346 ($dst$$reg << 25) | | |
2347 (Assembler::movcc_op3 << 19) | | |
2348 (1 << 18) | // cc2 bit for 'icc' | |
2349 ($primary << 14) | | |
2350 (0 << 13) | // select register move | |
2351 (0 << 11) | // cc1, cc0 bits for 'icc' | |
2352 ($src$$reg << 0); | |
2353 *((int*)(cbuf.code_end())) = op; | |
2354 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2355 %} | |
2356 | |
2357 enc_class enc_cmov_reg_minmax_long( iRegL dst, iRegL src ) %{ | |
2358 int op = (Assembler::arith_op << 30) | | |
2359 ($dst$$reg << 25) | | |
2360 (Assembler::movcc_op3 << 19) | | |
2361 (6 << 16) | // cc2 bit for 'xcc' | |
2362 ($primary << 14) | | |
2363 (0 << 13) | // select register move | |
2364 (0 << 11) | // cc1, cc0 bits for 'icc' | |
2365 ($src$$reg << 0); | |
2366 *((int*)(cbuf.code_end())) = op; | |
2367 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2368 %} | |
2369 | |
2370 // Utility encoding for loading a 64 bit Pointer into a register | |
2371 // The 64 bit pointer is stored in the generated code stream | |
2372 enc_class SetPtr( immP src, iRegP rd ) %{ | |
2373 Register dest = reg_to_register_object($rd$$reg); | |
2374 // [RGV] This next line should be generated from ADLC | |
2375 if ( _opnds[1]->constant_is_oop() ) { | |
2376 intptr_t val = $src$$constant; | |
2377 MacroAssembler _masm(&cbuf); | |
2378 __ set_oop_constant((jobject)val, dest); | |
2379 } else { // non-oop pointers, e.g. card mark base, heap top | |
2380 emit_ptr(cbuf, $src$$constant, dest, /*ForceRelocatable=*/ false); | |
2381 } | |
2382 %} | |
2383 | |
2384 enc_class Set13( immI13 src, iRegI rd ) %{ | |
2385 emit3_simm13( cbuf, Assembler::arith_op, $rd$$reg, Assembler::or_op3, 0, $src$$constant ); | |
2386 %} | |
2387 | |
2388 enc_class SetHi22( immI src, iRegI rd ) %{ | |
2389 emit2_22( cbuf, Assembler::branch_op, $rd$$reg, Assembler::sethi_op2, $src$$constant ); | |
2390 %} | |
2391 | |
2392 enc_class Set32( immI src, iRegI rd ) %{ | |
2393 MacroAssembler _masm(&cbuf); | |
2394 __ set($src$$constant, reg_to_register_object($rd$$reg)); | |
2395 %} | |
2396 | |
2397 enc_class SetNull( iRegI rd ) %{ | |
2398 emit3_simm13( cbuf, Assembler::arith_op, $rd$$reg, Assembler::or_op3, 0, 0 ); | |
2399 %} | |
2400 | |
2401 enc_class call_epilog %{ | |
2402 if( VerifyStackAtCalls ) { | |
2403 MacroAssembler _masm(&cbuf); | |
2404 int framesize = ra_->C->frame_slots() << LogBytesPerInt; | |
2405 Register temp_reg = G3; | |
2406 __ add(SP, framesize, temp_reg); | |
2407 __ cmp(temp_reg, FP); | |
2408 __ breakpoint_trap(Assembler::notEqual, Assembler::ptr_cc); | |
2409 } | |
2410 %} | |
2411 | |
2412 // Long values come back from native calls in O0:O1 in the 32-bit VM, copy the value | |
2413 // to G1 so the register allocator will not have to deal with the misaligned register | |
2414 // pair. | |
2415 enc_class adjust_long_from_native_call %{ | |
2416 #ifndef _LP64 | |
2417 if (returns_long()) { | |
2418 // sllx O0,32,O0 | |
2419 emit3_simm13( cbuf, Assembler::arith_op, R_O0_enc, Assembler::sllx_op3, R_O0_enc, 0x1020 ); | |
2420 // srl O1,0,O1 | |
2421 emit3_simm13( cbuf, Assembler::arith_op, R_O1_enc, Assembler::srl_op3, R_O1_enc, 0x0000 ); | |
2422 // or O0,O1,G1 | |
2423 emit3 ( cbuf, Assembler::arith_op, R_G1_enc, Assembler:: or_op3, R_O0_enc, 0, R_O1_enc ); | |
2424 } | |
2425 #endif | |
2426 %} | |
2427 | |
2428 enc_class Java_To_Runtime (method meth) %{ // CALL Java_To_Runtime | |
2429 // CALL directly to the runtime | |
2430 // The user of this is responsible for ensuring that R_L7 is empty (killed). | |
2431 emit_call_reloc(cbuf, $meth$$method, relocInfo::runtime_call_type, | |
2432 /*preserve_g2=*/true, /*force far call*/true); | |
2433 %} | |
2434 | |
2435 enc_class Java_Static_Call (method meth) %{ // JAVA STATIC CALL | |
2436 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine | |
2437 // who we intended to call. | |
2438 if ( !_method ) { | |
2439 emit_call_reloc(cbuf, $meth$$method, relocInfo::runtime_call_type); | |
2440 } else if (_optimized_virtual) { | |
2441 emit_call_reloc(cbuf, $meth$$method, relocInfo::opt_virtual_call_type); | |
2442 } else { | |
2443 emit_call_reloc(cbuf, $meth$$method, relocInfo::static_call_type); | |
2444 } | |
2445 if( _method ) { // Emit stub for static call | |
2446 emit_java_to_interp(cbuf); | |
2447 } | |
2448 %} | |
2449 | |
2450 enc_class Java_Dynamic_Call (method meth) %{ // JAVA DYNAMIC CALL | |
2451 MacroAssembler _masm(&cbuf); | |
2452 __ set_inst_mark(); | |
2453 int vtable_index = this->_vtable_index; | |
2454 // MachCallDynamicJavaNode::ret_addr_offset uses this same test | |
2455 if (vtable_index < 0) { | |
2456 // must be invalid_vtable_index, not nonvirtual_vtable_index | |
2457 assert(vtable_index == methodOopDesc::invalid_vtable_index, "correct sentinel value"); | |
2458 Register G5_ic_reg = reg_to_register_object(Matcher::inline_cache_reg_encode()); | |
2459 assert(G5_ic_reg == G5_inline_cache_reg, "G5_inline_cache_reg used in assemble_ic_buffer_code()"); | |
2460 assert(G5_ic_reg == G5_megamorphic_method, "G5_megamorphic_method used in megamorphic call stub"); | |
2461 // !!!!! | |
2462 // Generate "set 0x01, R_G5", placeholder instruction to load oop-info | |
2463 // emit_call_dynamic_prologue( cbuf ); | |
2464 __ set_oop((jobject)Universe::non_oop_word(), G5_ic_reg); | |
2465 | |
2466 address virtual_call_oop_addr = __ inst_mark(); | |
2467 // CALL to fixup routine. Fixup routine uses ScopeDesc info to determine | |
2468 // who we intended to call. | |
2469 __ relocate(virtual_call_Relocation::spec(virtual_call_oop_addr)); | |
2470 emit_call_reloc(cbuf, $meth$$method, relocInfo::none); | |
2471 } else { | |
2472 assert(!UseInlineCaches, "expect vtable calls only if not using ICs"); | |
2473 // Just go thru the vtable | |
2474 // get receiver klass (receiver already checked for non-null) | |
2475 // If we end up going thru a c2i adapter interpreter expects method in G5 | |
2476 int off = __ offset(); | |
2477 __ ld_ptr(O0, oopDesc::klass_offset_in_bytes(), G3_scratch); | |
2478 int entry_offset = instanceKlass::vtable_start_offset() + vtable_index*vtableEntry::size(); | |
2479 int v_off = entry_offset*wordSize + vtableEntry::method_offset_in_bytes(); | |
2480 if( __ is_simm13(v_off) ) { | |
2481 __ ld_ptr(G3, v_off, G5_method); | |
2482 } else { | |
2483 // Generate 2 instructions | |
2484 __ Assembler::sethi(v_off & ~0x3ff, G5_method); | |
2485 __ or3(G5_method, v_off & 0x3ff, G5_method); | |
2486 // ld_ptr, set_hi, set | |
2487 assert(__ offset() - off == 3*BytesPerInstWord, "Unexpected instruction size(s)"); | |
2488 __ ld_ptr(G3, G5_method, G5_method); | |
2489 } | |
2490 // NOTE: for vtable dispatches, the vtable entry will never be null. | |
2491 // However it may very well end up in handle_wrong_method if the | |
2492 // method is abstract for the particular class. | |
2493 __ ld_ptr(G5_method, in_bytes(methodOopDesc::from_compiled_offset()), G3_scratch); | |
2494 // jump to target (either compiled code or c2iadapter) | |
2495 __ jmpl(G3_scratch, G0, O7); | |
2496 __ delayed()->nop(); | |
2497 } | |
2498 %} | |
2499 | |
2500 enc_class Java_Compiled_Call (method meth) %{ // JAVA COMPILED CALL | |
2501 MacroAssembler _masm(&cbuf); | |
2502 | |
2503 Register G5_ic_reg = reg_to_register_object(Matcher::inline_cache_reg_encode()); | |
2504 Register temp_reg = G3; // caller must kill G3! We cannot reuse G5_ic_reg here because | |
2505 // we might be calling a C2I adapter which needs it. | |
2506 | |
2507 assert(temp_reg != G5_ic_reg, "conflicting registers"); | |
2508 // Load nmethod | |
2509 __ ld_ptr(G5_ic_reg, in_bytes(methodOopDesc::from_compiled_offset()), temp_reg); | |
2510 | |
2511 // CALL to compiled java, indirect the contents of G3 | |
2512 __ set_inst_mark(); | |
2513 __ callr(temp_reg, G0); | |
2514 __ delayed()->nop(); | |
2515 %} | |
2516 | |
2517 enc_class idiv_reg(iRegIsafe src1, iRegIsafe src2, iRegIsafe dst) %{ | |
2518 MacroAssembler _masm(&cbuf); | |
2519 Register Rdividend = reg_to_register_object($src1$$reg); | |
2520 Register Rdivisor = reg_to_register_object($src2$$reg); | |
2521 Register Rresult = reg_to_register_object($dst$$reg); | |
2522 | |
2523 __ sra(Rdivisor, 0, Rdivisor); | |
2524 __ sra(Rdividend, 0, Rdividend); | |
2525 __ sdivx(Rdividend, Rdivisor, Rresult); | |
2526 %} | |
2527 | |
2528 enc_class idiv_imm(iRegIsafe src1, immI13 imm, iRegIsafe dst) %{ | |
2529 MacroAssembler _masm(&cbuf); | |
2530 | |
2531 Register Rdividend = reg_to_register_object($src1$$reg); | |
2532 int divisor = $imm$$constant; | |
2533 Register Rresult = reg_to_register_object($dst$$reg); | |
2534 | |
2535 __ sra(Rdividend, 0, Rdividend); | |
2536 __ sdivx(Rdividend, divisor, Rresult); | |
2537 %} | |
2538 | |
2539 enc_class enc_mul_hi(iRegIsafe dst, iRegIsafe src1, iRegIsafe src2) %{ | |
2540 MacroAssembler _masm(&cbuf); | |
2541 Register Rsrc1 = reg_to_register_object($src1$$reg); | |
2542 Register Rsrc2 = reg_to_register_object($src2$$reg); | |
2543 Register Rdst = reg_to_register_object($dst$$reg); | |
2544 | |
2545 __ sra( Rsrc1, 0, Rsrc1 ); | |
2546 __ sra( Rsrc2, 0, Rsrc2 ); | |
2547 __ mulx( Rsrc1, Rsrc2, Rdst ); | |
2548 __ srlx( Rdst, 32, Rdst ); | |
2549 %} | |
2550 | |
2551 enc_class irem_reg(iRegIsafe src1, iRegIsafe src2, iRegIsafe dst, o7RegL scratch) %{ | |
2552 MacroAssembler _masm(&cbuf); | |
2553 Register Rdividend = reg_to_register_object($src1$$reg); | |
2554 Register Rdivisor = reg_to_register_object($src2$$reg); | |
2555 Register Rresult = reg_to_register_object($dst$$reg); | |
2556 Register Rscratch = reg_to_register_object($scratch$$reg); | |
2557 | |
2558 assert(Rdividend != Rscratch, ""); | |
2559 assert(Rdivisor != Rscratch, ""); | |
2560 | |
2561 __ sra(Rdividend, 0, Rdividend); | |
2562 __ sra(Rdivisor, 0, Rdivisor); | |
2563 __ sdivx(Rdividend, Rdivisor, Rscratch); | |
2564 __ mulx(Rscratch, Rdivisor, Rscratch); | |
2565 __ sub(Rdividend, Rscratch, Rresult); | |
2566 %} | |
2567 | |
2568 enc_class irem_imm(iRegIsafe src1, immI13 imm, iRegIsafe dst, o7RegL scratch) %{ | |
2569 MacroAssembler _masm(&cbuf); | |
2570 | |
2571 Register Rdividend = reg_to_register_object($src1$$reg); | |
2572 int divisor = $imm$$constant; | |
2573 Register Rresult = reg_to_register_object($dst$$reg); | |
2574 Register Rscratch = reg_to_register_object($scratch$$reg); | |
2575 | |
2576 assert(Rdividend != Rscratch, ""); | |
2577 | |
2578 __ sra(Rdividend, 0, Rdividend); | |
2579 __ sdivx(Rdividend, divisor, Rscratch); | |
2580 __ mulx(Rscratch, divisor, Rscratch); | |
2581 __ sub(Rdividend, Rscratch, Rresult); | |
2582 %} | |
2583 | |
2584 enc_class fabss (sflt_reg dst, sflt_reg src) %{ | |
2585 MacroAssembler _masm(&cbuf); | |
2586 | |
2587 FloatRegister Fdst = reg_to_SingleFloatRegister_object($dst$$reg); | |
2588 FloatRegister Fsrc = reg_to_SingleFloatRegister_object($src$$reg); | |
2589 | |
2590 __ fabs(FloatRegisterImpl::S, Fsrc, Fdst); | |
2591 %} | |
2592 | |
2593 enc_class fabsd (dflt_reg dst, dflt_reg src) %{ | |
2594 MacroAssembler _masm(&cbuf); | |
2595 | |
2596 FloatRegister Fdst = reg_to_DoubleFloatRegister_object($dst$$reg); | |
2597 FloatRegister Fsrc = reg_to_DoubleFloatRegister_object($src$$reg); | |
2598 | |
2599 __ fabs(FloatRegisterImpl::D, Fsrc, Fdst); | |
2600 %} | |
2601 | |
2602 enc_class fnegd (dflt_reg dst, dflt_reg src) %{ | |
2603 MacroAssembler _masm(&cbuf); | |
2604 | |
2605 FloatRegister Fdst = reg_to_DoubleFloatRegister_object($dst$$reg); | |
2606 FloatRegister Fsrc = reg_to_DoubleFloatRegister_object($src$$reg); | |
2607 | |
2608 __ fneg(FloatRegisterImpl::D, Fsrc, Fdst); | |
2609 %} | |
2610 | |
2611 enc_class fsqrts (sflt_reg dst, sflt_reg src) %{ | |
2612 MacroAssembler _masm(&cbuf); | |
2613 | |
2614 FloatRegister Fdst = reg_to_SingleFloatRegister_object($dst$$reg); | |
2615 FloatRegister Fsrc = reg_to_SingleFloatRegister_object($src$$reg); | |
2616 | |
2617 __ fsqrt(FloatRegisterImpl::S, Fsrc, Fdst); | |
2618 %} | |
2619 | |
2620 enc_class fsqrtd (dflt_reg dst, dflt_reg src) %{ | |
2621 MacroAssembler _masm(&cbuf); | |
2622 | |
2623 FloatRegister Fdst = reg_to_DoubleFloatRegister_object($dst$$reg); | |
2624 FloatRegister Fsrc = reg_to_DoubleFloatRegister_object($src$$reg); | |
2625 | |
2626 __ fsqrt(FloatRegisterImpl::D, Fsrc, Fdst); | |
2627 %} | |
2628 | |
2629 enc_class fmovs (dflt_reg dst, dflt_reg src) %{ | |
2630 MacroAssembler _masm(&cbuf); | |
2631 | |
2632 FloatRegister Fdst = reg_to_SingleFloatRegister_object($dst$$reg); | |
2633 FloatRegister Fsrc = reg_to_SingleFloatRegister_object($src$$reg); | |
2634 | |
2635 __ fmov(FloatRegisterImpl::S, Fsrc, Fdst); | |
2636 %} | |
2637 | |
2638 enc_class fmovd (dflt_reg dst, dflt_reg src) %{ | |
2639 MacroAssembler _masm(&cbuf); | |
2640 | |
2641 FloatRegister Fdst = reg_to_DoubleFloatRegister_object($dst$$reg); | |
2642 FloatRegister Fsrc = reg_to_DoubleFloatRegister_object($src$$reg); | |
2643 | |
2644 __ fmov(FloatRegisterImpl::D, Fsrc, Fdst); | |
2645 %} | |
2646 | |
2647 enc_class Fast_Lock(iRegP oop, iRegP box, o7RegP scratch, iRegP scratch2) %{ | |
2648 MacroAssembler _masm(&cbuf); | |
2649 | |
2650 Register Roop = reg_to_register_object($oop$$reg); | |
2651 Register Rbox = reg_to_register_object($box$$reg); | |
2652 Register Rscratch = reg_to_register_object($scratch$$reg); | |
2653 Register Rmark = reg_to_register_object($scratch2$$reg); | |
2654 | |
2655 assert(Roop != Rscratch, ""); | |
2656 assert(Roop != Rmark, ""); | |
2657 assert(Rbox != Rscratch, ""); | |
2658 assert(Rbox != Rmark, ""); | |
2659 | |
2660 __ compiler_lock_object(Roop, Rmark, Rbox, Rscratch, _counters); | |
2661 %} | |
2662 | |
2663 enc_class Fast_Unlock(iRegP oop, iRegP box, o7RegP scratch, iRegP scratch2) %{ | |
2664 MacroAssembler _masm(&cbuf); | |
2665 | |
2666 Register Roop = reg_to_register_object($oop$$reg); | |
2667 Register Rbox = reg_to_register_object($box$$reg); | |
2668 Register Rscratch = reg_to_register_object($scratch$$reg); | |
2669 Register Rmark = reg_to_register_object($scratch2$$reg); | |
2670 | |
2671 assert(Roop != Rscratch, ""); | |
2672 assert(Roop != Rmark, ""); | |
2673 assert(Rbox != Rscratch, ""); | |
2674 assert(Rbox != Rmark, ""); | |
2675 | |
2676 __ compiler_unlock_object(Roop, Rmark, Rbox, Rscratch); | |
2677 %} | |
2678 | |
2679 enc_class enc_cas( iRegP mem, iRegP old, iRegP new ) %{ | |
2680 MacroAssembler _masm(&cbuf); | |
2681 Register Rmem = reg_to_register_object($mem$$reg); | |
2682 Register Rold = reg_to_register_object($old$$reg); | |
2683 Register Rnew = reg_to_register_object($new$$reg); | |
2684 | |
2685 // casx_under_lock picks 1 of 3 encodings: | |
2686 // For 32-bit pointers you get a 32-bit CAS | |
2687 // For 64-bit pointers you get a 64-bit CASX | |
2688 __ casx_under_lock(Rmem, Rold, Rnew, // Swap(*Rmem,Rnew) if *Rmem == Rold | |
2689 (address) StubRoutines::Sparc::atomic_memory_operation_lock_addr()); | |
2690 __ cmp( Rold, Rnew ); | |
2691 %} | |
2692 | |
2693 enc_class enc_casx( iRegP mem, iRegL old, iRegL new) %{ | |
2694 Register Rmem = reg_to_register_object($mem$$reg); | |
2695 Register Rold = reg_to_register_object($old$$reg); | |
2696 Register Rnew = reg_to_register_object($new$$reg); | |
2697 | |
2698 MacroAssembler _masm(&cbuf); | |
2699 __ mov(Rnew, O7); | |
2700 __ casx(Rmem, Rold, O7); | |
2701 __ cmp( Rold, O7 ); | |
2702 %} | |
2703 | |
2704 // raw int cas, used for compareAndSwap | |
2705 enc_class enc_casi( iRegP mem, iRegL old, iRegL new) %{ | |
2706 Register Rmem = reg_to_register_object($mem$$reg); | |
2707 Register Rold = reg_to_register_object($old$$reg); | |
2708 Register Rnew = reg_to_register_object($new$$reg); | |
2709 | |
2710 MacroAssembler _masm(&cbuf); | |
2711 __ mov(Rnew, O7); | |
2712 __ cas(Rmem, Rold, O7); | |
2713 __ cmp( Rold, O7 ); | |
2714 %} | |
2715 | |
2716 enc_class enc_lflags_ne_to_boolean( iRegI res ) %{ | |
2717 Register Rres = reg_to_register_object($res$$reg); | |
2718 | |
2719 MacroAssembler _masm(&cbuf); | |
2720 __ mov(1, Rres); | |
2721 __ movcc( Assembler::notEqual, false, Assembler::xcc, G0, Rres ); | |
2722 %} | |
2723 | |
2724 enc_class enc_iflags_ne_to_boolean( iRegI res ) %{ | |
2725 Register Rres = reg_to_register_object($res$$reg); | |
2726 | |
2727 MacroAssembler _masm(&cbuf); | |
2728 __ mov(1, Rres); | |
2729 __ movcc( Assembler::notEqual, false, Assembler::icc, G0, Rres ); | |
2730 %} | |
2731 | |
2732 enc_class floating_cmp ( iRegP dst, regF src1, regF src2 ) %{ | |
2733 MacroAssembler _masm(&cbuf); | |
2734 Register Rdst = reg_to_register_object($dst$$reg); | |
2735 FloatRegister Fsrc1 = $primary ? reg_to_SingleFloatRegister_object($src1$$reg) | |
2736 : reg_to_DoubleFloatRegister_object($src1$$reg); | |
2737 FloatRegister Fsrc2 = $primary ? reg_to_SingleFloatRegister_object($src2$$reg) | |
2738 : reg_to_DoubleFloatRegister_object($src2$$reg); | |
2739 | |
2740 // Convert condition code fcc0 into -1,0,1; unordered reports less-than (-1) | |
2741 __ float_cmp( $primary, -1, Fsrc1, Fsrc2, Rdst); | |
2742 %} | |
2743 | |
2744 enc_class LdImmL (immL src, iRegL dst, o7RegL tmp) %{ // Load Immediate | |
2745 MacroAssembler _masm(&cbuf); | |
2746 Register dest = reg_to_register_object($dst$$reg); | |
2747 Register temp = reg_to_register_object($tmp$$reg); | |
2748 __ set64( $src$$constant, dest, temp ); | |
2749 %} | |
2750 | |
2751 enc_class LdImmF(immF src, regF dst, o7RegP tmp) %{ // Load Immediate | |
2752 address float_address = MacroAssembler(&cbuf).float_constant($src$$constant); | |
2753 RelocationHolder rspec = internal_word_Relocation::spec(float_address); | |
2754 #ifdef _LP64 | |
2755 Register tmp_reg = reg_to_register_object($tmp$$reg); | |
2756 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2757 emit_ptr(cbuf, (intptr_t)float_address, tmp_reg, /*ForceRelocatable=*/ true); | |
2758 emit3_simm10( cbuf, Assembler::ldst_op, $dst$$reg, Assembler::ldf_op3, $tmp$$reg, 0 ); | |
2759 #else // _LP64 | |
2760 uint *code; | |
2761 int tmp_reg = $tmp$$reg; | |
2762 | |
2763 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2764 emit2_22( cbuf, Assembler::branch_op, tmp_reg, Assembler::sethi_op2, (intptr_t) float_address ); | |
2765 | |
2766 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2767 emit3_simm10( cbuf, Assembler::ldst_op, $dst$$reg, Assembler::ldf_op3, tmp_reg, (intptr_t) float_address ); | |
2768 #endif // _LP64 | |
2769 %} | |
2770 | |
2771 enc_class LdImmD(immD src, regD dst, o7RegP tmp) %{ // Load Immediate | |
2772 address double_address = MacroAssembler(&cbuf).double_constant($src$$constant); | |
2773 RelocationHolder rspec = internal_word_Relocation::spec(double_address); | |
2774 #ifdef _LP64 | |
2775 Register tmp_reg = reg_to_register_object($tmp$$reg); | |
2776 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2777 emit_ptr(cbuf, (intptr_t)double_address, tmp_reg, /*ForceRelocatable=*/ true); | |
2778 emit3_simm10( cbuf, Assembler::ldst_op, $dst$$reg, Assembler::lddf_op3, $tmp$$reg, 0 ); | |
2779 #else // _LP64 | |
2780 uint *code; | |
2781 int tmp_reg = $tmp$$reg; | |
2782 | |
2783 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2784 emit2_22( cbuf, Assembler::branch_op, tmp_reg, Assembler::sethi_op2, (intptr_t) double_address ); | |
2785 | |
2786 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2787 emit3_simm10( cbuf, Assembler::ldst_op, $dst$$reg, Assembler::lddf_op3, tmp_reg, (intptr_t) double_address ); | |
2788 #endif // _LP64 | |
2789 %} | |
2790 | |
2791 enc_class LdReplImmI(immI src, regD dst, o7RegP tmp, int count, int width) %{ | |
2792 // Load a constant replicated "count" times with width "width" | |
2793 int bit_width = $width$$constant * 8; | |
2794 jlong elt_val = $src$$constant; | |
2795 elt_val &= (((jlong)1) << bit_width) - 1; // mask off sign bits | |
2796 jlong val = elt_val; | |
2797 for (int i = 0; i < $count$$constant - 1; i++) { | |
2798 val <<= bit_width; | |
2799 val |= elt_val; | |
2800 } | |
2801 jdouble dval = *(jdouble*)&val; // coerce to double type | |
2802 address double_address = MacroAssembler(&cbuf).double_constant(dval); | |
2803 RelocationHolder rspec = internal_word_Relocation::spec(double_address); | |
2804 #ifdef _LP64 | |
2805 Register tmp_reg = reg_to_register_object($tmp$$reg); | |
2806 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2807 emit_ptr(cbuf, (intptr_t)double_address, tmp_reg, /*ForceRelocatable=*/ true); | |
2808 emit3_simm10( cbuf, Assembler::ldst_op, $dst$$reg, Assembler::lddf_op3, $tmp$$reg, 0 ); | |
2809 #else // _LP64 | |
2810 uint *code; | |
2811 int tmp_reg = $tmp$$reg; | |
2812 | |
2813 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2814 emit2_22( cbuf, Assembler::branch_op, tmp_reg, Assembler::sethi_op2, (intptr_t) double_address ); | |
2815 | |
2816 cbuf.relocate(cbuf.code_end(), rspec, 0); | |
2817 emit3_simm10( cbuf, Assembler::ldst_op, $dst$$reg, Assembler::lddf_op3, tmp_reg, (intptr_t) double_address ); | |
2818 #endif // _LP64 | |
2819 %} | |
2820 | |
2821 | |
2822 enc_class ShouldNotEncodeThis ( ) %{ | |
2823 ShouldNotCallThis(); | |
2824 %} | |
2825 | |
2826 // Compiler ensures base is doubleword aligned and cnt is count of doublewords | |
2827 enc_class enc_Clear_Array(iRegX cnt, iRegP base, iRegX temp) %{ | |
2828 MacroAssembler _masm(&cbuf); | |
2829 Register nof_bytes_arg = reg_to_register_object($cnt$$reg); | |
2830 Register nof_bytes_tmp = reg_to_register_object($temp$$reg); | |
2831 Register base_pointer_arg = reg_to_register_object($base$$reg); | |
2832 | |
2833 Label loop; | |
2834 __ mov(nof_bytes_arg, nof_bytes_tmp); | |
2835 | |
2836 // Loop and clear, walking backwards through the array. | |
2837 // nof_bytes_tmp (if >0) is always the number of bytes to zero | |
2838 __ bind(loop); | |
2839 __ deccc(nof_bytes_tmp, 8); | |
2840 __ br(Assembler::greaterEqual, true, Assembler::pt, loop); | |
2841 __ delayed()-> stx(G0, base_pointer_arg, nof_bytes_tmp); | |
2842 // %%%% this mini-loop must not cross a cache boundary! | |
2843 %} | |
2844 | |
2845 | |
2846 enc_class enc_String_Compare(o0RegP str1, o1RegP str2, g3RegP tmp1, g4RegP tmp2, notemp_iRegI result) %{ | |
2847 Label Ldone, Lloop; | |
2848 MacroAssembler _masm(&cbuf); | |
2849 | |
2850 Register str1_reg = reg_to_register_object($str1$$reg); | |
2851 Register str2_reg = reg_to_register_object($str2$$reg); | |
2852 Register tmp1_reg = reg_to_register_object($tmp1$$reg); | |
2853 Register tmp2_reg = reg_to_register_object($tmp2$$reg); | |
2854 Register result_reg = reg_to_register_object($result$$reg); | |
2855 | |
2856 // Get the first character position in both strings | |
2857 // [8] char array, [12] offset, [16] count | |
2858 int value_offset = java_lang_String:: value_offset_in_bytes(); | |
2859 int offset_offset = java_lang_String::offset_offset_in_bytes(); | |
2860 int count_offset = java_lang_String:: count_offset_in_bytes(); | |
2861 | |
2862 // load str1 (jchar*) base address into tmp1_reg | |
2863 __ ld_ptr(Address(str1_reg, 0, value_offset), tmp1_reg); | |
2864 __ ld(Address(str1_reg, 0, offset_offset), result_reg); | |
2865 __ add(tmp1_reg, arrayOopDesc::base_offset_in_bytes(T_CHAR), tmp1_reg); | |
2866 __ ld(Address(str1_reg, 0, count_offset), str1_reg); // hoisted | |
2867 __ sll(result_reg, exact_log2(sizeof(jchar)), result_reg); | |
2868 __ ld_ptr(Address(str2_reg, 0, value_offset), tmp2_reg); // hoisted | |
2869 __ add(result_reg, tmp1_reg, tmp1_reg); | |
2870 | |
2871 // load str2 (jchar*) base address into tmp2_reg | |
2872 // __ ld_ptr(Address(str2_reg, 0, value_offset), tmp2_reg); // hoisted | |
2873 __ ld(Address(str2_reg, 0, offset_offset), result_reg); | |
2874 __ add(tmp2_reg, arrayOopDesc::base_offset_in_bytes(T_CHAR), tmp2_reg); | |
2875 __ ld(Address(str2_reg, 0, count_offset), str2_reg); // hoisted | |
2876 __ sll(result_reg, exact_log2(sizeof(jchar)), result_reg); | |
2877 __ subcc(str1_reg, str2_reg, O7); // hoisted | |
2878 __ add(result_reg, tmp2_reg, tmp2_reg); | |
2879 | |
2880 // Compute the minimum of the string lengths(str1_reg) and the | |
2881 // difference of the string lengths (stack) | |
2882 | |
2883 // discard string base pointers, after loading up the lengths | |
2884 // __ ld(Address(str1_reg, 0, count_offset), str1_reg); // hoisted | |
2885 // __ ld(Address(str2_reg, 0, count_offset), str2_reg); // hoisted | |
2886 | |
2887 // See if the lengths are different, and calculate min in str1_reg. | |
2888 // Stash diff in O7 in case we need it for a tie-breaker. | |
2889 Label Lskip; | |
2890 // __ subcc(str1_reg, str2_reg, O7); // hoisted | |
2891 __ sll(str1_reg, exact_log2(sizeof(jchar)), str1_reg); // scale the limit | |
2892 __ br(Assembler::greater, true, Assembler::pt, Lskip); | |
2893 // str2 is shorter, so use its count: | |
2894 __ delayed()->sll(str2_reg, exact_log2(sizeof(jchar)), str1_reg); // scale the limit | |
2895 __ bind(Lskip); | |
2896 | |
2897 // reallocate str1_reg, str2_reg, result_reg | |
2898 // Note: limit_reg holds the string length pre-scaled by 2 | |
2899 Register limit_reg = str1_reg; | |
2900 Register chr2_reg = str2_reg; | |
2901 Register chr1_reg = result_reg; | |
2902 // tmp{12} are the base pointers | |
2903 | |
2904 // Is the minimum length zero? | |
2905 __ cmp(limit_reg, (int)(0 * sizeof(jchar))); // use cast to resolve overloading ambiguity | |
2906 __ br(Assembler::equal, true, Assembler::pn, Ldone); | |
2907 __ delayed()->mov(O7, result_reg); // result is difference in lengths | |
2908 | |
2909 // Load first characters | |
2910 __ lduh(tmp1_reg, 0, chr1_reg); | |
2911 __ lduh(tmp2_reg, 0, chr2_reg); | |
2912 | |
2913 // Compare first characters | |
2914 __ subcc(chr1_reg, chr2_reg, chr1_reg); | |
2915 __ br(Assembler::notZero, false, Assembler::pt, Ldone); | |
2916 assert(chr1_reg == result_reg, "result must be pre-placed"); | |
2917 __ delayed()->nop(); | |
2918 | |
2919 { | |
2920 // Check after comparing first character to see if strings are equivalent | |
2921 Label LSkip2; | |
2922 // Check if the strings start at same location | |
2923 __ cmp(tmp1_reg, tmp2_reg); | |
2924 __ brx(Assembler::notEqual, true, Assembler::pt, LSkip2); | |
2925 __ delayed()->nop(); | |
2926 | |
2927 // Check if the length difference is zero (in O7) | |
2928 __ cmp(G0, O7); | |
2929 __ br(Assembler::equal, true, Assembler::pn, Ldone); | |
2930 __ delayed()->mov(G0, result_reg); // result is zero | |
2931 | |
2932 // Strings might not be equal | |
2933 __ bind(LSkip2); | |
2934 } | |
2935 | |
2936 __ subcc(limit_reg, 1 * sizeof(jchar), chr1_reg); | |
2937 __ br(Assembler::equal, true, Assembler::pn, Ldone); | |
2938 __ delayed()->mov(O7, result_reg); // result is difference in lengths | |
2939 | |
2940 // Shift tmp1_reg and tmp2_reg to the end of the arrays, negate limit | |
2941 __ add(tmp1_reg, limit_reg, tmp1_reg); | |
2942 __ add(tmp2_reg, limit_reg, tmp2_reg); | |
2943 __ neg(chr1_reg, limit_reg); // limit = -(limit-2) | |
2944 | |
2945 // Compare the rest of the characters | |
2946 __ lduh(tmp1_reg, limit_reg, chr1_reg); | |
2947 __ bind(Lloop); | |
2948 // __ lduh(tmp1_reg, limit_reg, chr1_reg); // hoisted | |
2949 __ lduh(tmp2_reg, limit_reg, chr2_reg); | |
2950 __ subcc(chr1_reg, chr2_reg, chr1_reg); | |
2951 __ br(Assembler::notZero, false, Assembler::pt, Ldone); | |
2952 assert(chr1_reg == result_reg, "result must be pre-placed"); | |
2953 __ delayed()->inccc(limit_reg, sizeof(jchar)); | |
2954 // annul LDUH if branch is not taken to prevent access past end of string | |
2955 __ br(Assembler::notZero, true, Assembler::pt, Lloop); | |
2956 __ delayed()->lduh(tmp1_reg, limit_reg, chr1_reg); // hoisted | |
2957 | |
2958 // If strings are equal up to min length, return the length difference. | |
2959 __ mov(O7, result_reg); | |
2960 | |
2961 // Otherwise, return the difference between the first mismatched chars. | |
2962 __ bind(Ldone); | |
2963 %} | |
2964 | |
2965 enc_class enc_rethrow() %{ | |
2966 cbuf.set_inst_mark(); | |
2967 Register temp_reg = G3; | |
2968 Address rethrow_stub(temp_reg, OptoRuntime::rethrow_stub()); | |
2969 assert(temp_reg != reg_to_register_object(R_I0_num), "temp must not break oop_reg"); | |
2970 MacroAssembler _masm(&cbuf); | |
2971 #ifdef ASSERT | |
2972 __ save_frame(0); | |
2973 Address last_rethrow_addr(L1, (address)&last_rethrow); | |
2974 __ sethi(last_rethrow_addr); | |
2975 __ get_pc(L2); | |
2976 __ inc(L2, 3 * BytesPerInstWord); // skip this & 2 more insns to point at jump_to | |
2977 __ st_ptr(L2, last_rethrow_addr); | |
2978 __ restore(); | |
2979 #endif | |
2980 __ JUMP(rethrow_stub, 0); // sethi;jmp | |
2981 __ delayed()->nop(); | |
2982 %} | |
2983 | |
2984 enc_class emit_mem_nop() %{ | |
2985 // Generates the instruction LDUXA [o6,g0],#0x82,g0 | |
2986 unsigned int *code = (unsigned int*)cbuf.code_end(); | |
2987 *code = (unsigned int)0xc0839040; | |
2988 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2989 %} | |
2990 | |
2991 enc_class emit_fadd_nop() %{ | |
2992 // Generates the instruction FMOVS f31,f31 | |
2993 unsigned int *code = (unsigned int*)cbuf.code_end(); | |
2994 *code = (unsigned int)0xbfa0003f; | |
2995 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
2996 %} | |
2997 | |
2998 enc_class emit_br_nop() %{ | |
2999 // Generates the instruction BPN,PN . | |
3000 unsigned int *code = (unsigned int*)cbuf.code_end(); | |
3001 *code = (unsigned int)0x00400000; | |
3002 cbuf.set_code_end(cbuf.code_end() + BytesPerInstWord); | |
3003 %} | |
3004 | |
3005 enc_class enc_membar_acquire %{ | |
3006 MacroAssembler _masm(&cbuf); | |
3007 __ membar( Assembler::Membar_mask_bits(Assembler::LoadStore | Assembler::LoadLoad) ); | |
3008 %} | |
3009 | |
3010 enc_class enc_membar_release %{ | |
3011 MacroAssembler _masm(&cbuf); | |
3012 __ membar( Assembler::Membar_mask_bits(Assembler::LoadStore | Assembler::StoreStore) ); | |
3013 %} | |
3014 | |
3015 enc_class enc_membar_volatile %{ | |
3016 MacroAssembler _masm(&cbuf); | |
3017 __ membar( Assembler::Membar_mask_bits(Assembler::StoreLoad) ); | |
3018 %} | |
3019 enc_class enc_repl8b( iRegI src, iRegL dst ) %{ | |
3020 MacroAssembler _masm(&cbuf); | |
3021 Register src_reg = reg_to_register_object($src$$reg); | |
3022 Register dst_reg = reg_to_register_object($dst$$reg); | |
3023 __ sllx(src_reg, 56, dst_reg); | |
3024 __ srlx(dst_reg, 8, O7); | |
3025 __ or3 (dst_reg, O7, dst_reg); | |
3026 __ srlx(dst_reg, 16, O7); | |
3027 __ or3 (dst_reg, O7, dst_reg); | |
3028 __ srlx(dst_reg, 32, O7); | |
3029 __ or3 (dst_reg, O7, dst_reg); | |
3030 %} | |
3031 | |
3032 enc_class enc_repl4b( iRegI src, iRegL dst ) %{ | |
3033 MacroAssembler _masm(&cbuf); | |
3034 Register src_reg = reg_to_register_object($src$$reg); | |
3035 Register dst_reg = reg_to_register_object($dst$$reg); | |
3036 __ sll(src_reg, 24, dst_reg); | |
3037 __ srl(dst_reg, 8, O7); | |
3038 __ or3(dst_reg, O7, dst_reg); | |
3039 __ srl(dst_reg, 16, O7); | |
3040 __ or3(dst_reg, O7, dst_reg); | |
3041 %} | |
3042 | |
3043 enc_class enc_repl4s( iRegI src, iRegL dst ) %{ | |
3044 MacroAssembler _masm(&cbuf); | |
3045 Register src_reg = reg_to_register_object($src$$reg); | |
3046 Register dst_reg = reg_to_register_object($dst$$reg); | |
3047 __ sllx(src_reg, 48, dst_reg); | |
3048 __ srlx(dst_reg, 16, O7); | |
3049 __ or3 (dst_reg, O7, dst_reg); | |
3050 __ srlx(dst_reg, 32, O7); | |
3051 __ or3 (dst_reg, O7, dst_reg); | |
3052 %} | |
3053 | |
3054 enc_class enc_repl2i( iRegI src, iRegL dst ) %{ | |
3055 MacroAssembler _masm(&cbuf); | |
3056 Register src_reg = reg_to_register_object($src$$reg); | |
3057 Register dst_reg = reg_to_register_object($dst$$reg); | |
3058 __ sllx(src_reg, 32, dst_reg); | |
3059 __ srlx(dst_reg, 32, O7); | |
3060 __ or3 (dst_reg, O7, dst_reg); | |
3061 %} | |
3062 | |
3063 %} | |
3064 | |
3065 //----------FRAME-------------------------------------------------------------- | |
3066 // Definition of frame structure and management information. | |
3067 // | |
3068 // S T A C K L A Y O U T Allocators stack-slot number | |
3069 // | (to get allocators register number | |
3070 // G Owned by | | v add VMRegImpl::stack0) | |
3071 // r CALLER | | | |
3072 // o | +--------+ pad to even-align allocators stack-slot | |
3073 // w V | pad0 | numbers; owned by CALLER | |
3074 // t -----------+--------+----> Matcher::_in_arg_limit, unaligned | |
3075 // h ^ | in | 5 | |
3076 // | | args | 4 Holes in incoming args owned by SELF | |
3077 // | | | | 3 | |
3078 // | | +--------+ | |
3079 // V | | old out| Empty on Intel, window on Sparc | |
3080 // | old |preserve| Must be even aligned. | |
3081 // | SP-+--------+----> Matcher::_old_SP, 8 (or 16 in LP64)-byte aligned | |
3082 // | | in | 3 area for Intel ret address | |
3083 // Owned by |preserve| Empty on Sparc. | |
3084 // SELF +--------+ | |
3085 // | | pad2 | 2 pad to align old SP | |
3086 // | +--------+ 1 | |
3087 // | | locks | 0 | |
3088 // | +--------+----> VMRegImpl::stack0, 8 (or 16 in LP64)-byte aligned | |
3089 // | | pad1 | 11 pad to align new SP | |
3090 // | +--------+ | |
3091 // | | | 10 | |
3092 // | | spills | 9 spills | |
3093 // V | | 8 (pad0 slot for callee) | |
3094 // -----------+--------+----> Matcher::_out_arg_limit, unaligned | |
3095 // ^ | out | 7 | |
3096 // | | args | 6 Holes in outgoing args owned by CALLEE | |
3097 // Owned by +--------+ | |
3098 // CALLEE | new out| 6 Empty on Intel, window on Sparc | |
3099 // | new |preserve| Must be even-aligned. | |
3100 // | SP-+--------+----> Matcher::_new_SP, even aligned | |
3101 // | | | | |
3102 // | |
3103 // Note 1: Only region 8-11 is determined by the allocator. Region 0-5 is | |
3104 // known from SELF's arguments and the Java calling convention. | |
3105 // Region 6-7 is determined per call site. | |
3106 // Note 2: If the calling convention leaves holes in the incoming argument | |
3107 // area, those holes are owned by SELF. Holes in the outgoing area | |
3108 // are owned by the CALLEE. Holes should not be nessecary in the | |
3109 // incoming area, as the Java calling convention is completely under | |
3110 // the control of the AD file. Doubles can be sorted and packed to | |
3111 // avoid holes. Holes in the outgoing arguments may be nessecary for | |
3112 // varargs C calling conventions. | |
3113 // Note 3: Region 0-3 is even aligned, with pad2 as needed. Region 3-5 is | |
3114 // even aligned with pad0 as needed. | |
3115 // Region 6 is even aligned. Region 6-7 is NOT even aligned; | |
3116 // region 6-11 is even aligned; it may be padded out more so that | |
3117 // the region from SP to FP meets the minimum stack alignment. | |
3118 | |
3119 frame %{ | |
3120 // What direction does stack grow in (assumed to be same for native & Java) | |
3121 stack_direction(TOWARDS_LOW); | |
3122 | |
3123 // These two registers define part of the calling convention | |
3124 // between compiled code and the interpreter. | |
3125 inline_cache_reg(R_G5); // Inline Cache Register or methodOop for I2C | |
3126 interpreter_method_oop_reg(R_G5); // Method Oop Register when calling interpreter | |
3127 | |
3128 // Optional: name the operand used by cisc-spilling to access [stack_pointer + offset] | |
3129 cisc_spilling_operand_name(indOffset); | |
3130 | |
3131 // Number of stack slots consumed by a Monitor enter | |
3132 #ifdef _LP64 | |
3133 sync_stack_slots(2); | |
3134 #else | |
3135 sync_stack_slots(1); | |
3136 #endif | |
3137 | |
3138 // Compiled code's Frame Pointer | |
3139 frame_pointer(R_SP); | |
3140 | |
3141 // Stack alignment requirement | |
3142 stack_alignment(StackAlignmentInBytes); | |
3143 // LP64: Alignment size in bytes (128-bit -> 16 bytes) | |
3144 // !LP64: Alignment size in bytes (64-bit -> 8 bytes) | |
3145 | |
3146 // Number of stack slots between incoming argument block and the start of | |
3147 // a new frame. The PROLOG must add this many slots to the stack. The | |
3148 // EPILOG must remove this many slots. | |
3149 in_preserve_stack_slots(0); | |
3150 | |
3151 // Number of outgoing stack slots killed above the out_preserve_stack_slots | |
3152 // for calls to C. Supports the var-args backing area for register parms. | |
3153 // ADLC doesn't support parsing expressions, so I folded the math by hand. | |
3154 #ifdef _LP64 | |
3155 // (callee_register_argument_save_area_words (6) + callee_aggregate_return_pointer_words (0)) * 2-stack-slots-per-word | |
3156 varargs_C_out_slots_killed(12); | |
3157 #else | |
3158 // (callee_register_argument_save_area_words (6) + callee_aggregate_return_pointer_words (1)) * 1-stack-slots-per-word | |
3159 varargs_C_out_slots_killed( 7); | |
3160 #endif | |
3161 | |
3162 // The after-PROLOG location of the return address. Location of | |
3163 // return address specifies a type (REG or STACK) and a number | |
3164 // representing the register number (i.e. - use a register name) or | |
3165 // stack slot. | |
3166 return_addr(REG R_I7); // Ret Addr is in register I7 | |
3167 | |
3168 // Body of function which returns an OptoRegs array locating | |
3169 // arguments either in registers or in stack slots for calling | |
3170 // java | |
3171 calling_convention %{ | |
3172 (void) SharedRuntime::java_calling_convention(sig_bt, regs, length, is_outgoing); | |
3173 | |
3174 %} | |
3175 | |
3176 // Body of function which returns an OptoRegs array locating | |
3177 // arguments either in registers or in stack slots for callin | |
3178 // C. | |
3179 c_calling_convention %{ | |
3180 // This is obviously always outgoing | |
3181 (void) SharedRuntime::c_calling_convention(sig_bt, regs, length); | |
3182 %} | |
3183 | |
3184 // Location of native (C/C++) and interpreter return values. This is specified to | |
3185 // be the same as Java. In the 32-bit VM, long values are actually returned from | |
3186 // native calls in O0:O1 and returned to the interpreter in I0:I1. The copying | |
3187 // to and from the register pairs is done by the appropriate call and epilog | |
3188 // opcodes. This simplifies the register allocator. | |
3189 c_return_value %{ | |
3190 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" ); | |
3191 #ifdef _LP64 | |
3192 static int lo_out[Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, R_O0_num, R_O0_num, R_F0_num, R_F0_num, R_O0_num }; | |
3193 static int hi_out[Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, R_O0H_num, OptoReg::Bad, R_F1_num, R_O0H_num}; | |
3194 static int lo_in [Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, R_I0_num, R_I0_num, R_F0_num, R_F0_num, R_I0_num }; | |
3195 static int hi_in [Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, R_I0H_num, OptoReg::Bad, R_F1_num, R_I0H_num}; | |
3196 #else // !_LP64 | |
3197 static int lo_out[Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, R_O0_num, R_O0_num, R_F0_num, R_F0_num, R_G1_num }; | |
3198 static int hi_out[Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, R_F1_num, R_G1H_num }; | |
3199 static int lo_in [Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, R_I0_num, R_I0_num, R_F0_num, R_F0_num, R_G1_num }; | |
3200 static int hi_in [Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, R_F1_num, R_G1H_num }; | |
3201 #endif | |
3202 return OptoRegPair( (is_outgoing?hi_out:hi_in)[ideal_reg], | |
3203 (is_outgoing?lo_out:lo_in)[ideal_reg] ); | |
3204 %} | |
3205 | |
3206 // Location of compiled Java return values. Same as C | |
3207 return_value %{ | |
3208 assert( ideal_reg >= Op_RegI && ideal_reg <= Op_RegL, "only return normal values" ); | |
3209 #ifdef _LP64 | |
3210 static int lo_out[Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, R_O0_num, R_O0_num, R_F0_num, R_F0_num, R_O0_num }; | |
3211 static int hi_out[Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, R_O0H_num, OptoReg::Bad, R_F1_num, R_O0H_num}; | |
3212 static int lo_in [Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, R_I0_num, R_I0_num, R_F0_num, R_F0_num, R_I0_num }; | |
3213 static int hi_in [Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, R_I0H_num, OptoReg::Bad, R_F1_num, R_I0H_num}; | |
3214 #else // !_LP64 | |
3215 static int lo_out[Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, R_O0_num, R_O0_num, R_F0_num, R_F0_num, R_G1_num }; | |
3216 static int hi_out[Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, R_F1_num, R_G1H_num}; | |
3217 static int lo_in [Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, R_I0_num, R_I0_num, R_F0_num, R_F0_num, R_G1_num }; | |
3218 static int hi_in [Op_RegL+1] = { OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, OptoReg::Bad, R_F1_num, R_G1H_num}; | |
3219 #endif | |
3220 return OptoRegPair( (is_outgoing?hi_out:hi_in)[ideal_reg], | |
3221 (is_outgoing?lo_out:lo_in)[ideal_reg] ); | |
3222 %} | |
3223 | |
3224 %} | |
3225 | |
3226 | |
3227 //----------ATTRIBUTES--------------------------------------------------------- | |
3228 //----------Operand Attributes------------------------------------------------- | |
3229 op_attrib op_cost(1); // Required cost attribute | |
3230 | |
3231 //----------Instruction Attributes--------------------------------------------- | |
3232 ins_attrib ins_cost(DEFAULT_COST); // Required cost attribute | |
3233 ins_attrib ins_size(32); // Required size attribute (in bits) | |
3234 ins_attrib ins_pc_relative(0); // Required PC Relative flag | |
3235 ins_attrib ins_short_branch(0); // Required flag: is this instruction a | |
3236 // non-matching short branch variant of some | |
3237 // long branch? | |
3238 | |
3239 //----------OPERANDS----------------------------------------------------------- | |
3240 // Operand definitions must precede instruction definitions for correct parsing | |
3241 // in the ADLC because operands constitute user defined types which are used in | |
3242 // instruction definitions. | |
3243 | |
3244 //----------Simple Operands---------------------------------------------------- | |
3245 // Immediate Operands | |
3246 // Integer Immediate: 32-bit | |
3247 operand immI() %{ | |
3248 match(ConI); | |
3249 | |
3250 op_cost(0); | |
3251 // formats are generated automatically for constants and base registers | |
3252 format %{ %} | |
3253 interface(CONST_INTER); | |
3254 %} | |
3255 | |
3256 // Integer Immediate: 13-bit | |
3257 operand immI13() %{ | |
3258 predicate(Assembler::is_simm13(n->get_int())); | |
3259 match(ConI); | |
3260 op_cost(0); | |
3261 | |
3262 format %{ %} | |
3263 interface(CONST_INTER); | |
3264 %} | |
3265 | |
3266 // Unsigned (positive) Integer Immediate: 13-bit | |
3267 operand immU13() %{ | |
3268 predicate((0 <= n->get_int()) && Assembler::is_simm13(n->get_int())); | |
3269 match(ConI); | |
3270 op_cost(0); | |
3271 | |
3272 format %{ %} | |
3273 interface(CONST_INTER); | |
3274 %} | |
3275 | |
3276 // Integer Immediate: 6-bit | |
3277 operand immU6() %{ | |
3278 predicate(n->get_int() >= 0 && n->get_int() <= 63); | |
3279 match(ConI); | |
3280 op_cost(0); | |
3281 format %{ %} | |
3282 interface(CONST_INTER); | |
3283 %} | |
3284 | |
3285 // Integer Immediate: 11-bit | |
3286 operand immI11() %{ | |
3287 predicate(Assembler::is_simm(n->get_int(),11)); | |
3288 match(ConI); | |
3289 op_cost(0); | |
3290 format %{ %} | |
3291 interface(CONST_INTER); | |
3292 %} | |
3293 | |
3294 // Integer Immediate: 0-bit | |
3295 operand immI0() %{ | |
3296 predicate(n->get_int() == 0); | |
3297 match(ConI); | |
3298 op_cost(0); | |
3299 | |
3300 format %{ %} | |
3301 interface(CONST_INTER); | |
3302 %} | |
3303 | |
3304 // Integer Immediate: the value 10 | |
3305 operand immI10() %{ | |
3306 predicate(n->get_int() == 10); | |
3307 match(ConI); | |
3308 op_cost(0); | |
3309 | |
3310 format %{ %} | |
3311 interface(CONST_INTER); | |
3312 %} | |
3313 | |
3314 // Integer Immediate: the values 0-31 | |
3315 operand immU5() %{ | |
3316 predicate(n->get_int() >= 0 && n->get_int() <= 31); | |
3317 match(ConI); | |
3318 op_cost(0); | |
3319 | |
3320 format %{ %} | |
3321 interface(CONST_INTER); | |
3322 %} | |
3323 | |
3324 // Integer Immediate: the values 1-31 | |
3325 operand immI_1_31() %{ | |
3326 predicate(n->get_int() >= 1 && n->get_int() <= 31); | |
3327 match(ConI); | |
3328 op_cost(0); | |
3329 | |
3330 format %{ %} | |
3331 interface(CONST_INTER); | |
3332 %} | |
3333 | |
3334 // Integer Immediate: the values 32-63 | |
3335 operand immI_32_63() %{ | |
3336 predicate(n->get_int() >= 32 && n->get_int() <= 63); | |
3337 match(ConI); | |
3338 op_cost(0); | |
3339 | |
3340 format %{ %} | |
3341 interface(CONST_INTER); | |
3342 %} | |
3343 | |
3344 // Integer Immediate: the value 255 | |
3345 operand immI_255() %{ | |
3346 predicate( n->get_int() == 255 ); | |
3347 match(ConI); | |
3348 op_cost(0); | |
3349 | |
3350 format %{ %} | |
3351 interface(CONST_INTER); | |
3352 %} | |
3353 | |
3354 // Long Immediate: the value FF | |
3355 operand immL_FF() %{ | |
3356 predicate( n->get_long() == 0xFFL ); | |
3357 match(ConL); | |
3358 op_cost(0); | |
3359 | |
3360 format %{ %} | |
3361 interface(CONST_INTER); | |
3362 %} | |
3363 | |
3364 // Long Immediate: the value FFFF | |
3365 operand immL_FFFF() %{ | |
3366 predicate( n->get_long() == 0xFFFFL ); | |
3367 match(ConL); | |
3368 op_cost(0); | |
3369 | |
3370 format %{ %} | |
3371 interface(CONST_INTER); | |
3372 %} | |
3373 | |
3374 // Pointer Immediate: 32 or 64-bit | |
3375 operand immP() %{ | |
3376 match(ConP); | |
3377 | |
3378 op_cost(5); | |
3379 // formats are generated automatically for constants and base registers | |
3380 format %{ %} | |
3381 interface(CONST_INTER); | |
3382 %} | |
3383 | |
3384 operand immP13() %{ | |
3385 predicate((-4096 < n->get_ptr()) && (n->get_ptr() <= 4095)); | |
3386 match(ConP); | |
3387 op_cost(0); | |
3388 | |
3389 format %{ %} | |
3390 interface(CONST_INTER); | |
3391 %} | |
3392 | |
3393 operand immP0() %{ | |
3394 predicate(n->get_ptr() == 0); | |
3395 match(ConP); | |
3396 op_cost(0); | |
3397 | |
3398 format %{ %} | |
3399 interface(CONST_INTER); | |
3400 %} | |
3401 | |
3402 operand immP_poll() %{ | |
3403 predicate(n->get_ptr() != 0 && n->get_ptr() == (intptr_t)os::get_polling_page()); | |
3404 match(ConP); | |
3405 | |
3406 // formats are generated automatically for constants and base registers | |
3407 format %{ %} | |
3408 interface(CONST_INTER); | |
3409 %} | |
3410 | |
3411 operand immL() %{ | |
3412 match(ConL); | |
3413 op_cost(40); | |
3414 // formats are generated automatically for constants and base registers | |
3415 format %{ %} | |
3416 interface(CONST_INTER); | |
3417 %} | |
3418 | |
3419 operand immL0() %{ | |
3420 predicate(n->get_long() == 0L); | |
3421 match(ConL); | |
3422 op_cost(0); | |
3423 // formats are generated automatically for constants and base registers | |
3424 format %{ %} | |
3425 interface(CONST_INTER); | |
3426 %} | |
3427 | |
3428 // Long Immediate: 13-bit | |
3429 operand immL13() %{ | |
3430 predicate((-4096L < n->get_long()) && (n->get_long() <= 4095L)); | |
3431 match(ConL); | |
3432 op_cost(0); | |
3433 | |
3434 format %{ %} | |
3435 interface(CONST_INTER); | |
3436 %} | |
3437 | |
3438 // Long Immediate: low 32-bit mask | |
3439 operand immL_32bits() %{ | |
3440 predicate(n->get_long() == 0xFFFFFFFFL); | |
3441 match(ConL); | |
3442 op_cost(0); | |
3443 | |
3444 format %{ %} | |
3445 interface(CONST_INTER); | |
3446 %} | |
3447 | |
3448 // Double Immediate | |
3449 operand immD() %{ | |
3450 match(ConD); | |
3451 | |
3452 op_cost(40); | |
3453 format %{ %} | |
3454 interface(CONST_INTER); | |
3455 %} | |
3456 | |
3457 operand immD0() %{ | |
3458 #ifdef _LP64 | |
3459 // on 64-bit architectures this comparision is faster | |
3460 predicate(jlong_cast(n->getd()) == 0); | |
3461 #else | |
3462 predicate((n->getd() == 0) && (fpclass(n->getd()) == FP_PZERO)); | |
3463 #endif | |
3464 match(ConD); | |
3465 | |
3466 op_cost(0); | |
3467 format %{ %} | |
3468 interface(CONST_INTER); | |
3469 %} | |
3470 | |
3471 // Float Immediate | |
3472 operand immF() %{ | |
3473 match(ConF); | |
3474 | |
3475 op_cost(20); | |
3476 format %{ %} | |
3477 interface(CONST_INTER); | |
3478 %} | |
3479 | |
3480 // Float Immediate: 0 | |
3481 operand immF0() %{ | |
3482 predicate((n->getf() == 0) && (fpclass(n->getf()) == FP_PZERO)); | |
3483 match(ConF); | |
3484 | |
3485 op_cost(0); | |
3486 format %{ %} | |
3487 interface(CONST_INTER); | |
3488 %} | |
3489 | |
3490 // Integer Register Operands | |
3491 // Integer Register | |
3492 operand iRegI() %{ | |
3493 constraint(ALLOC_IN_RC(int_reg)); | |
3494 match(RegI); | |
3495 | |
3496 match(notemp_iRegI); | |
3497 match(g1RegI); | |
3498 match(o0RegI); | |
3499 match(iRegIsafe); | |
3500 | |
3501 format %{ %} | |
3502 interface(REG_INTER); | |
3503 %} | |
3504 | |
3505 operand notemp_iRegI() %{ | |
3506 constraint(ALLOC_IN_RC(notemp_int_reg)); | |
3507 match(RegI); | |
3508 | |
3509 match(o0RegI); | |
3510 | |
3511 format %{ %} | |
3512 interface(REG_INTER); | |
3513 %} | |
3514 | |
3515 operand o0RegI() %{ | |
3516 constraint(ALLOC_IN_RC(o0_regI)); | |
3517 match(iRegI); | |
3518 | |
3519 format %{ %} | |
3520 interface(REG_INTER); | |
3521 %} | |
3522 | |
3523 // Pointer Register | |
3524 operand iRegP() %{ | |
3525 constraint(ALLOC_IN_RC(ptr_reg)); | |
3526 match(RegP); | |
3527 | |
3528 match(lock_ptr_RegP); | |
3529 match(g1RegP); | |
3530 match(g2RegP); | |
3531 match(g3RegP); | |
3532 match(g4RegP); | |
3533 match(i0RegP); | |
3534 match(o0RegP); | |
3535 match(o1RegP); | |
3536 match(l7RegP); | |
3537 | |
3538 format %{ %} | |
3539 interface(REG_INTER); | |
3540 %} | |
3541 | |
3542 operand sp_ptr_RegP() %{ | |
3543 constraint(ALLOC_IN_RC(sp_ptr_reg)); | |
3544 match(RegP); | |
3545 match(iRegP); | |
3546 | |
3547 format %{ %} | |
3548 interface(REG_INTER); | |
3549 %} | |
3550 | |
3551 operand lock_ptr_RegP() %{ | |
3552 constraint(ALLOC_IN_RC(lock_ptr_reg)); | |
3553 match(RegP); | |
3554 match(i0RegP); | |
3555 match(o0RegP); | |
3556 match(o1RegP); | |
3557 match(l7RegP); | |
3558 | |
3559 format %{ %} | |
3560 interface(REG_INTER); | |
3561 %} | |
3562 | |
3563 operand g1RegP() %{ | |
3564 constraint(ALLOC_IN_RC(g1_regP)); | |
3565 match(iRegP); | |
3566 | |
3567 format %{ %} | |
3568 interface(REG_INTER); | |
3569 %} | |
3570 | |
3571 operand g2RegP() %{ | |
3572 constraint(ALLOC_IN_RC(g2_regP)); | |
3573 match(iRegP); | |
3574 | |
3575 format %{ %} | |
3576 interface(REG_INTER); | |
3577 %} | |
3578 | |
3579 operand g3RegP() %{ | |
3580 constraint(ALLOC_IN_RC(g3_regP)); | |
3581 match(iRegP); | |
3582 | |
3583 format %{ %} | |
3584 interface(REG_INTER); | |
3585 %} | |
3586 | |
3587 operand g1RegI() %{ | |
3588 constraint(ALLOC_IN_RC(g1_regI)); | |
3589 match(iRegI); | |
3590 | |
3591 format %{ %} | |
3592 interface(REG_INTER); | |
3593 %} | |
3594 | |
3595 operand g3RegI() %{ | |
3596 constraint(ALLOC_IN_RC(g3_regI)); | |
3597 match(iRegI); | |
3598 | |
3599 format %{ %} | |
3600 interface(REG_INTER); | |
3601 %} | |
3602 | |
3603 operand g4RegI() %{ | |
3604 constraint(ALLOC_IN_RC(g4_regI)); | |
3605 match(iRegI); | |
3606 | |
3607 format %{ %} | |
3608 interface(REG_INTER); | |
3609 %} | |
3610 | |
3611 operand g4RegP() %{ | |
3612 constraint(ALLOC_IN_RC(g4_regP)); | |
3613 match(iRegP); | |
3614 | |
3615 format %{ %} | |
3616 interface(REG_INTER); | |
3617 %} | |
3618 | |
3619 operand i0RegP() %{ | |
3620 constraint(ALLOC_IN_RC(i0_regP)); | |
3621 match(iRegP); | |
3622 | |
3623 format %{ %} | |
3624 interface(REG_INTER); | |
3625 %} | |
3626 | |
3627 operand o0RegP() %{ | |
3628 constraint(ALLOC_IN_RC(o0_regP)); | |
3629 match(iRegP); | |
3630 | |
3631 format %{ %} | |
3632 interface(REG_INTER); | |
3633 %} | |
3634 | |
3635 operand o1RegP() %{ | |
3636 constraint(ALLOC_IN_RC(o1_regP)); | |
3637 match(iRegP); | |
3638 | |
3639 format %{ %} | |
3640 interface(REG_INTER); | |
3641 %} | |
3642 | |
3643 operand o2RegP() %{ | |
3644 constraint(ALLOC_IN_RC(o2_regP)); | |
3645 match(iRegP); | |
3646 | |
3647 format %{ %} | |
3648 interface(REG_INTER); | |
3649 %} | |
3650 | |
3651 operand o7RegP() %{ | |
3652 constraint(ALLOC_IN_RC(o7_regP)); | |
3653 match(iRegP); | |
3654 | |
3655 format %{ %} | |
3656 interface(REG_INTER); | |
3657 %} | |
3658 | |
3659 operand l7RegP() %{ | |
3660 constraint(ALLOC_IN_RC(l7_regP)); | |
3661 match(iRegP); | |
3662 | |
3663 format %{ %} | |
3664 interface(REG_INTER); | |
3665 %} | |
3666 | |
3667 operand o7RegI() %{ | |
3668 constraint(ALLOC_IN_RC(o7_regI)); | |
3669 match(iRegI); | |
3670 | |
3671 format %{ %} | |
3672 interface(REG_INTER); | |
3673 %} | |
3674 | |
3675 // Long Register | |
3676 operand iRegL() %{ | |
3677 constraint(ALLOC_IN_RC(long_reg)); | |
3678 match(RegL); | |
3679 | |
3680 format %{ %} | |
3681 interface(REG_INTER); | |
3682 %} | |
3683 | |
3684 operand o2RegL() %{ | |
3685 constraint(ALLOC_IN_RC(o2_regL)); | |
3686 match(iRegL); | |
3687 | |
3688 format %{ %} | |
3689 interface(REG_INTER); | |
3690 %} | |
3691 | |
3692 operand o7RegL() %{ | |
3693 constraint(ALLOC_IN_RC(o7_regL)); | |
3694 match(iRegL); | |
3695 | |
3696 format %{ %} | |
3697 interface(REG_INTER); | |
3698 %} | |
3699 | |
3700 operand g1RegL() %{ | |
3701 constraint(ALLOC_IN_RC(g1_regL)); | |
3702 match(iRegL); | |
3703 | |
3704 format %{ %} | |
3705 interface(REG_INTER); | |
3706 %} | |
3707 | |
3708 // Int Register safe | |
3709 // This is 64bit safe | |
3710 operand iRegIsafe() %{ | |
3711 constraint(ALLOC_IN_RC(long_reg)); | |
3712 | |
3713 match(iRegI); | |
3714 | |
3715 format %{ %} | |
3716 interface(REG_INTER); | |
3717 %} | |
3718 | |
3719 // Condition Code Flag Register | |
3720 operand flagsReg() %{ | |
3721 constraint(ALLOC_IN_RC(int_flags)); | |
3722 match(RegFlags); | |
3723 | |
3724 format %{ "ccr" %} // both ICC and XCC | |
3725 interface(REG_INTER); | |
3726 %} | |
3727 | |
3728 // Condition Code Register, unsigned comparisons. | |
3729 operand flagsRegU() %{ | |
3730 constraint(ALLOC_IN_RC(int_flags)); | |
3731 match(RegFlags); | |
3732 | |
3733 format %{ "icc_U" %} | |
3734 interface(REG_INTER); | |
3735 %} | |
3736 | |
3737 // Condition Code Register, pointer comparisons. | |
3738 operand flagsRegP() %{ | |
3739 constraint(ALLOC_IN_RC(int_flags)); | |
3740 match(RegFlags); | |
3741 | |
3742 #ifdef _LP64 | |
3743 format %{ "xcc_P" %} | |
3744 #else | |
3745 format %{ "icc_P" %} | |
3746 #endif | |
3747 interface(REG_INTER); | |
3748 %} | |
3749 | |
3750 // Condition Code Register, long comparisons. | |
3751 operand flagsRegL() %{ | |
3752 constraint(ALLOC_IN_RC(int_flags)); | |
3753 match(RegFlags); | |
3754 | |
3755 format %{ "xcc_L" %} | |
3756 interface(REG_INTER); | |
3757 %} | |
3758 | |
3759 // Condition Code Register, floating comparisons, unordered same as "less". | |
3760 operand flagsRegF() %{ | |
3761 constraint(ALLOC_IN_RC(float_flags)); | |
3762 match(RegFlags); | |
3763 match(flagsRegF0); | |
3764 | |
3765 format %{ %} | |
3766 interface(REG_INTER); | |
3767 %} | |
3768 | |
3769 operand flagsRegF0() %{ | |
3770 constraint(ALLOC_IN_RC(float_flag0)); | |
3771 match(RegFlags); | |
3772 | |
3773 format %{ %} | |
3774 interface(REG_INTER); | |
3775 %} | |
3776 | |
3777 | |
3778 // Condition Code Flag Register used by long compare | |
3779 operand flagsReg_long_LTGE() %{ | |
3780 constraint(ALLOC_IN_RC(int_flags)); | |
3781 match(RegFlags); | |
3782 format %{ "icc_LTGE" %} | |
3783 interface(REG_INTER); | |
3784 %} | |
3785 operand flagsReg_long_EQNE() %{ | |
3786 constraint(ALLOC_IN_RC(int_flags)); | |
3787 match(RegFlags); | |
3788 format %{ "icc_EQNE" %} | |
3789 interface(REG_INTER); | |
3790 %} | |
3791 operand flagsReg_long_LEGT() %{ | |
3792 constraint(ALLOC_IN_RC(int_flags)); | |
3793 match(RegFlags); | |
3794 format %{ "icc_LEGT" %} | |
3795 interface(REG_INTER); | |
3796 %} | |
3797 | |
3798 | |
3799 operand regD() %{ | |
3800 constraint(ALLOC_IN_RC(dflt_reg)); | |
3801 match(RegD); | |
3802 | |
3803 format %{ %} | |
3804 interface(REG_INTER); | |
3805 %} | |
3806 | |
3807 operand regF() %{ | |
3808 constraint(ALLOC_IN_RC(sflt_reg)); | |
3809 match(RegF); | |
3810 | |
3811 format %{ %} | |
3812 interface(REG_INTER); | |
3813 %} | |
3814 | |
3815 operand regD_low() %{ | |
3816 constraint(ALLOC_IN_RC(dflt_low_reg)); | |
3817 match(RegD); | |
3818 | |
3819 format %{ %} | |
3820 interface(REG_INTER); | |
3821 %} | |
3822 | |
3823 // Special Registers | |
3824 | |
3825 // Method Register | |
3826 operand inline_cache_regP(iRegP reg) %{ | |
3827 constraint(ALLOC_IN_RC(g5_regP)); // G5=inline_cache_reg but uses 2 bits instead of 1 | |
3828 match(reg); | |
3829 format %{ %} | |
3830 interface(REG_INTER); | |
3831 %} | |
3832 | |
3833 operand interpreter_method_oop_regP(iRegP reg) %{ | |
3834 constraint(ALLOC_IN_RC(g5_regP)); // G5=interpreter_method_oop_reg but uses 2 bits instead of 1 | |
3835 match(reg); | |
3836 format %{ %} | |
3837 interface(REG_INTER); | |
3838 %} | |
3839 | |
3840 | |
3841 //----------Complex Operands--------------------------------------------------- | |
3842 // Indirect Memory Reference | |
3843 operand indirect(sp_ptr_RegP reg) %{ | |
3844 constraint(ALLOC_IN_RC(sp_ptr_reg)); | |
3845 match(reg); | |
3846 | |
3847 op_cost(100); | |
3848 format %{ "[$reg]" %} | |
3849 interface(MEMORY_INTER) %{ | |
3850 base($reg); | |
3851 index(0x0); | |
3852 scale(0x0); | |
3853 disp(0x0); | |
3854 %} | |
3855 %} | |
3856 | |
3857 // Indirect with Offset | |
3858 operand indOffset13(sp_ptr_RegP reg, immX13 offset) %{ | |
3859 constraint(ALLOC_IN_RC(sp_ptr_reg)); | |
3860 match(AddP reg offset); | |
3861 | |
3862 op_cost(100); | |
3863 format %{ "[$reg + $offset]" %} | |
3864 interface(MEMORY_INTER) %{ | |
3865 base($reg); | |
3866 index(0x0); | |
3867 scale(0x0); | |
3868 disp($offset); | |
3869 %} | |
3870 %} | |
3871 | |
3872 // Note: Intel has a swapped version also, like this: | |
3873 //operand indOffsetX(iRegI reg, immP offset) %{ | |
3874 // constraint(ALLOC_IN_RC(int_reg)); | |
3875 // match(AddP offset reg); | |
3876 // | |
3877 // op_cost(100); | |
3878 // format %{ "[$reg + $offset]" %} | |
3879 // interface(MEMORY_INTER) %{ | |
3880 // base($reg); | |
3881 // index(0x0); | |
3882 // scale(0x0); | |
3883 // disp($offset); | |
3884 // %} | |
3885 //%} | |
3886 //// However, it doesn't make sense for SPARC, since | |
3887 // we have no particularly good way to embed oops in | |
3888 // single instructions. | |
3889 | |
3890 // Indirect with Register Index | |
3891 operand indIndex(iRegP addr, iRegX index) %{ | |
3892 constraint(ALLOC_IN_RC(ptr_reg)); | |
3893 match(AddP addr index); | |
3894 | |
3895 op_cost(100); | |
3896 format %{ "[$addr + $index]" %} | |
3897 interface(MEMORY_INTER) %{ | |
3898 base($addr); | |
3899 index($index); | |
3900 scale(0x0); | |
3901 disp(0x0); | |
3902 %} | |
3903 %} | |
3904 | |
3905 //----------Special Memory Operands-------------------------------------------- | |
3906 // Stack Slot Operand - This operand is used for loading and storing temporary | |
3907 // values on the stack where a match requires a value to | |
3908 // flow through memory. | |
3909 operand stackSlotI(sRegI reg) %{ | |
3910 constraint(ALLOC_IN_RC(stack_slots)); | |
3911 op_cost(100); | |
3912 //match(RegI); | |
3913 format %{ "[$reg]" %} | |
3914 interface(MEMORY_INTER) %{ | |
3915 base(0xE); // R_SP | |
3916 index(0x0); | |
3917 scale(0x0); | |
3918 disp($reg); // Stack Offset | |
3919 %} | |
3920 %} | |
3921 | |
3922 operand stackSlotP(sRegP reg) %{ | |
3923 constraint(ALLOC_IN_RC(stack_slots)); | |
3924 op_cost(100); | |
3925 //match(RegP); | |
3926 format %{ "[$reg]" %} | |
3927 interface(MEMORY_INTER) %{ | |
3928 base(0xE); // R_SP | |
3929 index(0x0); | |
3930 scale(0x0); | |
3931 disp($reg); // Stack Offset | |
3932 %} | |
3933 %} | |
3934 | |
3935 operand stackSlotF(sRegF reg) %{ | |
3936 constraint(ALLOC_IN_RC(stack_slots)); | |
3937 op_cost(100); | |
3938 //match(RegF); | |
3939 format %{ "[$reg]" %} | |
3940 interface(MEMORY_INTER) %{ | |
3941 base(0xE); // R_SP | |
3942 index(0x0); | |
3943 scale(0x0); | |
3944 disp($reg); // Stack Offset | |
3945 %} | |
3946 %} | |
3947 operand stackSlotD(sRegD reg) %{ | |
3948 constraint(ALLOC_IN_RC(stack_slots)); | |
3949 op_cost(100); | |
3950 //match(RegD); | |
3951 format %{ "[$reg]" %} | |
3952 interface(MEMORY_INTER) %{ | |
3953 base(0xE); // R_SP | |
3954 index(0x0); | |
3955 scale(0x0); | |
3956 disp($reg); // Stack Offset | |
3957 %} | |
3958 %} | |
3959 operand stackSlotL(sRegL reg) %{ | |
3960 constraint(ALLOC_IN_RC(stack_slots)); | |
3961 op_cost(100); | |
3962 //match(RegL); | |
3963 format %{ "[$reg]" %} | |
3964 interface(MEMORY_INTER) %{ | |
3965 base(0xE); // R_SP | |
3966 index(0x0); | |
3967 scale(0x0); | |
3968 disp($reg); // Stack Offset | |
3969 %} | |
3970 %} | |
3971 | |
3972 // Operands for expressing Control Flow | |
3973 // NOTE: Label is a predefined operand which should not be redefined in | |
3974 // the AD file. It is generically handled within the ADLC. | |
3975 | |
3976 //----------Conditional Branch Operands---------------------------------------- | |
3977 // Comparison Op - This is the operation of the comparison, and is limited to | |
3978 // the following set of codes: | |
3979 // L (<), LE (<=), G (>), GE (>=), E (==), NE (!=) | |
3980 // | |
3981 // Other attributes of the comparison, such as unsignedness, are specified | |
3982 // by the comparison instruction that sets a condition code flags register. | |
3983 // That result is represented by a flags operand whose subtype is appropriate | |
3984 // to the unsignedness (etc.) of the comparison. | |
3985 // | |
3986 // Later, the instruction which matches both the Comparison Op (a Bool) and | |
3987 // the flags (produced by the Cmp) specifies the coding of the comparison op | |
3988 // by matching a specific subtype of Bool operand below, such as cmpOpU. | |
3989 | |
3990 operand cmpOp() %{ | |
3991 match(Bool); | |
3992 | |
3993 format %{ "" %} | |
3994 interface(COND_INTER) %{ | |
3995 equal(0x1); | |
3996 not_equal(0x9); | |
3997 less(0x3); | |
3998 greater_equal(0xB); | |
3999 less_equal(0x2); | |
4000 greater(0xA); | |
4001 %} | |
4002 %} | |
4003 | |
4004 // Comparison Op, unsigned | |
4005 operand cmpOpU() %{ | |
4006 match(Bool); | |
4007 | |
4008 format %{ "u" %} | |
4009 interface(COND_INTER) %{ | |
4010 equal(0x1); | |
4011 not_equal(0x9); | |
4012 less(0x5); | |
4013 greater_equal(0xD); | |
4014 less_equal(0x4); | |
4015 greater(0xC); | |
4016 %} | |
4017 %} | |
4018 | |
4019 // Comparison Op, pointer (same as unsigned) | |
4020 operand cmpOpP() %{ | |
4021 match(Bool); | |
4022 | |
4023 format %{ "p" %} | |
4024 interface(COND_INTER) %{ | |
4025 equal(0x1); | |
4026 not_equal(0x9); | |
4027 less(0x5); | |
4028 greater_equal(0xD); | |
4029 less_equal(0x4); | |
4030 greater(0xC); | |
4031 %} | |
4032 %} | |
4033 | |
4034 // Comparison Op, branch-register encoding | |
4035 operand cmpOp_reg() %{ | |
4036 match(Bool); | |
4037 | |
4038 format %{ "" %} | |
4039 interface(COND_INTER) %{ | |
4040 equal (0x1); | |
4041 not_equal (0x5); | |
4042 less (0x3); | |
4043 greater_equal(0x7); | |
4044 less_equal (0x2); | |
4045 greater (0x6); | |
4046 %} | |
4047 %} | |
4048 | |
4049 // Comparison Code, floating, unordered same as less | |
4050 operand cmpOpF() %{ | |
4051 match(Bool); | |
4052 | |
4053 format %{ "fl" %} | |
4054 interface(COND_INTER) %{ | |
4055 equal(0x9); | |
4056 not_equal(0x1); | |
4057 less(0x3); | |
4058 greater_equal(0xB); | |
4059 less_equal(0xE); | |
4060 greater(0x6); | |
4061 %} | |
4062 %} | |
4063 | |
4064 // Used by long compare | |
4065 operand cmpOp_commute() %{ | |
4066 match(Bool); | |
4067 | |
4068 format %{ "" %} | |
4069 interface(COND_INTER) %{ | |
4070 equal(0x1); | |
4071 not_equal(0x9); | |
4072 less(0xA); | |
4073 greater_equal(0x2); | |
4074 less_equal(0xB); | |
4075 greater(0x3); | |
4076 %} | |
4077 %} | |
4078 | |
4079 //----------OPERAND CLASSES---------------------------------------------------- | |
4080 // Operand Classes are groups of operands that are used to simplify | |
4081 // instruction definitions by not requiring the AD writer to specify seperate | |
4082 // instructions for every form of operand when the instruction accepts | |
4083 // multiple operand types with the same basic encoding and format. The classic | |
4084 // case of this is memory operands. | |
4085 // Indirect is not included since its use is limited to Compare & Swap | |
4086 opclass memory( indirect, indOffset13, indIndex ); | |
4087 | |
4088 //----------PIPELINE----------------------------------------------------------- | |
4089 pipeline %{ | |
4090 | |
4091 //----------ATTRIBUTES--------------------------------------------------------- | |
4092 attributes %{ | |
4093 fixed_size_instructions; // Fixed size instructions | |
4094 branch_has_delay_slot; // Branch has delay slot following | |
4095 max_instructions_per_bundle = 4; // Up to 4 instructions per bundle | |
4096 instruction_unit_size = 4; // An instruction is 4 bytes long | |
4097 instruction_fetch_unit_size = 16; // The processor fetches one line | |
4098 instruction_fetch_units = 1; // of 16 bytes | |
4099 | |
4100 // List of nop instructions | |
4101 nops( Nop_A0, Nop_A1, Nop_MS, Nop_FA, Nop_BR ); | |
4102 %} | |
4103 | |
4104 //----------RESOURCES---------------------------------------------------------- | |
4105 // Resources are the functional units available to the machine | |
4106 resources(A0, A1, MS, BR, FA, FM, IDIV, FDIV, IALU = A0 | A1); | |
4107 | |
4108 //----------PIPELINE DESCRIPTION----------------------------------------------- | |
4109 // Pipeline Description specifies the stages in the machine's pipeline | |
4110 | |
4111 pipe_desc(A, P, F, B, I, J, S, R, E, C, M, W, X, T, D); | |
4112 | |
4113 //----------PIPELINE CLASSES--------------------------------------------------- | |
4114 // Pipeline Classes describe the stages in which input and output are | |
4115 // referenced by the hardware pipeline. | |
4116 | |
4117 // Integer ALU reg-reg operation | |
4118 pipe_class ialu_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
4119 single_instruction; | |
4120 dst : E(write); | |
4121 src1 : R(read); | |
4122 src2 : R(read); | |
4123 IALU : R; | |
4124 %} | |
4125 | |
4126 // Integer ALU reg-reg long operation | |
4127 pipe_class ialu_reg_reg_2(iRegL dst, iRegL src1, iRegL src2) %{ | |
4128 instruction_count(2); | |
4129 dst : E(write); | |
4130 src1 : R(read); | |
4131 src2 : R(read); | |
4132 IALU : R; | |
4133 IALU : R; | |
4134 %} | |
4135 | |
4136 // Integer ALU reg-reg long dependent operation | |
4137 pipe_class ialu_reg_reg_2_dep(iRegL dst, iRegL src1, iRegL src2, flagsReg cr) %{ | |
4138 instruction_count(1); multiple_bundles; | |
4139 dst : E(write); | |
4140 src1 : R(read); | |
4141 src2 : R(read); | |
4142 cr : E(write); | |
4143 IALU : R(2); | |
4144 %} | |
4145 | |
4146 // Integer ALU reg-imm operaion | |
4147 pipe_class ialu_reg_imm(iRegI dst, iRegI src1, immI13 src2) %{ | |
4148 single_instruction; | |
4149 dst : E(write); | |
4150 src1 : R(read); | |
4151 IALU : R; | |
4152 %} | |
4153 | |
4154 // Integer ALU reg-reg operation with condition code | |
4155 pipe_class ialu_cc_reg_reg(iRegI dst, iRegI src1, iRegI src2, flagsReg cr) %{ | |
4156 single_instruction; | |
4157 dst : E(write); | |
4158 cr : E(write); | |
4159 src1 : R(read); | |
4160 src2 : R(read); | |
4161 IALU : R; | |
4162 %} | |
4163 | |
4164 // Integer ALU reg-imm operation with condition code | |
4165 pipe_class ialu_cc_reg_imm(iRegI dst, iRegI src1, immI13 src2, flagsReg cr) %{ | |
4166 single_instruction; | |
4167 dst : E(write); | |
4168 cr : E(write); | |
4169 src1 : R(read); | |
4170 IALU : R; | |
4171 %} | |
4172 | |
4173 // Integer ALU zero-reg operation | |
4174 pipe_class ialu_zero_reg(iRegI dst, immI0 zero, iRegI src2) %{ | |
4175 single_instruction; | |
4176 dst : E(write); | |
4177 src2 : R(read); | |
4178 IALU : R; | |
4179 %} | |
4180 | |
4181 // Integer ALU zero-reg operation with condition code only | |
4182 pipe_class ialu_cconly_zero_reg(flagsReg cr, iRegI src) %{ | |
4183 single_instruction; | |
4184 cr : E(write); | |
4185 src : R(read); | |
4186 IALU : R; | |
4187 %} | |
4188 | |
4189 // Integer ALU reg-reg operation with condition code only | |
4190 pipe_class ialu_cconly_reg_reg(flagsReg cr, iRegI src1, iRegI src2) %{ | |
4191 single_instruction; | |
4192 cr : E(write); | |
4193 src1 : R(read); | |
4194 src2 : R(read); | |
4195 IALU : R; | |
4196 %} | |
4197 | |
4198 // Integer ALU reg-imm operation with condition code only | |
4199 pipe_class ialu_cconly_reg_imm(flagsReg cr, iRegI src1, immI13 src2) %{ | |
4200 single_instruction; | |
4201 cr : E(write); | |
4202 src1 : R(read); | |
4203 IALU : R; | |
4204 %} | |
4205 | |
4206 // Integer ALU reg-reg-zero operation with condition code only | |
4207 pipe_class ialu_cconly_reg_reg_zero(flagsReg cr, iRegI src1, iRegI src2, immI0 zero) %{ | |
4208 single_instruction; | |
4209 cr : E(write); | |
4210 src1 : R(read); | |
4211 src2 : R(read); | |
4212 IALU : R; | |
4213 %} | |
4214 | |
4215 // Integer ALU reg-imm-zero operation with condition code only | |
4216 pipe_class ialu_cconly_reg_imm_zero(flagsReg cr, iRegI src1, immI13 src2, immI0 zero) %{ | |
4217 single_instruction; | |
4218 cr : E(write); | |
4219 src1 : R(read); | |
4220 IALU : R; | |
4221 %} | |
4222 | |
4223 // Integer ALU reg-reg operation with condition code, src1 modified | |
4224 pipe_class ialu_cc_rwreg_reg(flagsReg cr, iRegI src1, iRegI src2) %{ | |
4225 single_instruction; | |
4226 cr : E(write); | |
4227 src1 : E(write); | |
4228 src1 : R(read); | |
4229 src2 : R(read); | |
4230 IALU : R; | |
4231 %} | |
4232 | |
4233 // Integer ALU reg-imm operation with condition code, src1 modified | |
4234 pipe_class ialu_cc_rwreg_imm(flagsReg cr, iRegI src1, immI13 src2) %{ | |
4235 single_instruction; | |
4236 cr : E(write); | |
4237 src1 : E(write); | |
4238 src1 : R(read); | |
4239 IALU : R; | |
4240 %} | |
4241 | |
4242 pipe_class cmpL_reg(iRegI dst, iRegL src1, iRegL src2, flagsReg cr ) %{ | |
4243 multiple_bundles; | |
4244 dst : E(write)+4; | |
4245 cr : E(write); | |
4246 src1 : R(read); | |
4247 src2 : R(read); | |
4248 IALU : R(3); | |
4249 BR : R(2); | |
4250 %} | |
4251 | |
4252 // Integer ALU operation | |
4253 pipe_class ialu_none(iRegI dst) %{ | |
4254 single_instruction; | |
4255 dst : E(write); | |
4256 IALU : R; | |
4257 %} | |
4258 | |
4259 // Integer ALU reg operation | |
4260 pipe_class ialu_reg(iRegI dst, iRegI src) %{ | |
4261 single_instruction; may_have_no_code; | |
4262 dst : E(write); | |
4263 src : R(read); | |
4264 IALU : R; | |
4265 %} | |
4266 | |
4267 // Integer ALU reg conditional operation | |
4268 // This instruction has a 1 cycle stall, and cannot execute | |
4269 // in the same cycle as the instruction setting the condition | |
4270 // code. We kludge this by pretending to read the condition code | |
4271 // 1 cycle earlier, and by marking the functional units as busy | |
4272 // for 2 cycles with the result available 1 cycle later than | |
4273 // is really the case. | |
4274 pipe_class ialu_reg_flags( iRegI op2_out, iRegI op2_in, iRegI op1, flagsReg cr ) %{ | |
4275 single_instruction; | |
4276 op2_out : C(write); | |
4277 op1 : R(read); | |
4278 cr : R(read); // This is really E, with a 1 cycle stall | |
4279 BR : R(2); | |
4280 MS : R(2); | |
4281 %} | |
4282 | |
4283 #ifdef _LP64 | |
4284 pipe_class ialu_clr_and_mover( iRegI dst, iRegP src ) %{ | |
4285 instruction_count(1); multiple_bundles; | |
4286 dst : C(write)+1; | |
4287 src : R(read)+1; | |
4288 IALU : R(1); | |
4289 BR : E(2); | |
4290 MS : E(2); | |
4291 %} | |
4292 #endif | |
4293 | |
4294 // Integer ALU reg operation | |
4295 pipe_class ialu_move_reg_L_to_I(iRegI dst, iRegL src) %{ | |
4296 single_instruction; may_have_no_code; | |
4297 dst : E(write); | |
4298 src : R(read); | |
4299 IALU : R; | |
4300 %} | |
4301 pipe_class ialu_move_reg_I_to_L(iRegL dst, iRegI src) %{ | |
4302 single_instruction; may_have_no_code; | |
4303 dst : E(write); | |
4304 src : R(read); | |
4305 IALU : R; | |
4306 %} | |
4307 | |
4308 // Two integer ALU reg operations | |
4309 pipe_class ialu_reg_2(iRegL dst, iRegL src) %{ | |
4310 instruction_count(2); | |
4311 dst : E(write); | |
4312 src : R(read); | |
4313 A0 : R; | |
4314 A1 : R; | |
4315 %} | |
4316 | |
4317 // Two integer ALU reg operations | |
4318 pipe_class ialu_move_reg_L_to_L(iRegL dst, iRegL src) %{ | |
4319 instruction_count(2); may_have_no_code; | |
4320 dst : E(write); | |
4321 src : R(read); | |
4322 A0 : R; | |
4323 A1 : R; | |
4324 %} | |
4325 | |
4326 // Integer ALU imm operation | |
4327 pipe_class ialu_imm(iRegI dst, immI13 src) %{ | |
4328 single_instruction; | |
4329 dst : E(write); | |
4330 IALU : R; | |
4331 %} | |
4332 | |
4333 // Integer ALU reg-reg with carry operation | |
4334 pipe_class ialu_reg_reg_cy(iRegI dst, iRegI src1, iRegI src2, iRegI cy) %{ | |
4335 single_instruction; | |
4336 dst : E(write); | |
4337 src1 : R(read); | |
4338 src2 : R(read); | |
4339 IALU : R; | |
4340 %} | |
4341 | |
4342 // Integer ALU cc operation | |
4343 pipe_class ialu_cc(iRegI dst, flagsReg cc) %{ | |
4344 single_instruction; | |
4345 dst : E(write); | |
4346 cc : R(read); | |
4347 IALU : R; | |
4348 %} | |
4349 | |
4350 // Integer ALU cc / second IALU operation | |
4351 pipe_class ialu_reg_ialu( iRegI dst, iRegI src ) %{ | |
4352 instruction_count(1); multiple_bundles; | |
4353 dst : E(write)+1; | |
4354 src : R(read); | |
4355 IALU : R; | |
4356 %} | |
4357 | |
4358 // Integer ALU cc / second IALU operation | |
4359 pipe_class ialu_reg_reg_ialu( iRegI dst, iRegI p, iRegI q ) %{ | |
4360 instruction_count(1); multiple_bundles; | |
4361 dst : E(write)+1; | |
4362 p : R(read); | |
4363 q : R(read); | |
4364 IALU : R; | |
4365 %} | |
4366 | |
4367 // Integer ALU hi-lo-reg operation | |
4368 pipe_class ialu_hi_lo_reg(iRegI dst, immI src) %{ | |
4369 instruction_count(1); multiple_bundles; | |
4370 dst : E(write)+1; | |
4371 IALU : R(2); | |
4372 %} | |
4373 | |
4374 // Float ALU hi-lo-reg operation (with temp) | |
4375 pipe_class ialu_hi_lo_reg_temp(regF dst, immF src, g3RegP tmp) %{ | |
4376 instruction_count(1); multiple_bundles; | |
4377 dst : E(write)+1; | |
4378 IALU : R(2); | |
4379 %} | |
4380 | |
4381 // Long Constant | |
4382 pipe_class loadConL( iRegL dst, immL src ) %{ | |
4383 instruction_count(2); multiple_bundles; | |
4384 dst : E(write)+1; | |
4385 IALU : R(2); | |
4386 IALU : R(2); | |
4387 %} | |
4388 | |
4389 // Pointer Constant | |
4390 pipe_class loadConP( iRegP dst, immP src ) %{ | |
4391 instruction_count(0); multiple_bundles; | |
4392 fixed_latency(6); | |
4393 %} | |
4394 | |
4395 // Polling Address | |
4396 pipe_class loadConP_poll( iRegP dst, immP_poll src ) %{ | |
4397 #ifdef _LP64 | |
4398 instruction_count(0); multiple_bundles; | |
4399 fixed_latency(6); | |
4400 #else | |
4401 dst : E(write); | |
4402 IALU : R; | |
4403 #endif | |
4404 %} | |
4405 | |
4406 // Long Constant small | |
4407 pipe_class loadConLlo( iRegL dst, immL src ) %{ | |
4408 instruction_count(2); | |
4409 dst : E(write); | |
4410 IALU : R; | |
4411 IALU : R; | |
4412 %} | |
4413 | |
4414 // [PHH] This is wrong for 64-bit. See LdImmF/D. | |
4415 pipe_class loadConFD(regF dst, immF src, g3RegP tmp) %{ | |
4416 instruction_count(1); multiple_bundles; | |
4417 src : R(read); | |
4418 dst : M(write)+1; | |
4419 IALU : R; | |
4420 MS : E; | |
4421 %} | |
4422 | |
4423 // Integer ALU nop operation | |
4424 pipe_class ialu_nop() %{ | |
4425 single_instruction; | |
4426 IALU : R; | |
4427 %} | |
4428 | |
4429 // Integer ALU nop operation | |
4430 pipe_class ialu_nop_A0() %{ | |
4431 single_instruction; | |
4432 A0 : R; | |
4433 %} | |
4434 | |
4435 // Integer ALU nop operation | |
4436 pipe_class ialu_nop_A1() %{ | |
4437 single_instruction; | |
4438 A1 : R; | |
4439 %} | |
4440 | |
4441 // Integer Multiply reg-reg operation | |
4442 pipe_class imul_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
4443 single_instruction; | |
4444 dst : E(write); | |
4445 src1 : R(read); | |
4446 src2 : R(read); | |
4447 MS : R(5); | |
4448 %} | |
4449 | |
4450 // Integer Multiply reg-imm operation | |
4451 pipe_class imul_reg_imm(iRegI dst, iRegI src1, immI13 src2) %{ | |
4452 single_instruction; | |
4453 dst : E(write); | |
4454 src1 : R(read); | |
4455 MS : R(5); | |
4456 %} | |
4457 | |
4458 pipe_class mulL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
4459 single_instruction; | |
4460 dst : E(write)+4; | |
4461 src1 : R(read); | |
4462 src2 : R(read); | |
4463 MS : R(6); | |
4464 %} | |
4465 | |
4466 pipe_class mulL_reg_imm(iRegL dst, iRegL src1, immL13 src2) %{ | |
4467 single_instruction; | |
4468 dst : E(write)+4; | |
4469 src1 : R(read); | |
4470 MS : R(6); | |
4471 %} | |
4472 | |
4473 // Integer Divide reg-reg | |
4474 pipe_class sdiv_reg_reg(iRegI dst, iRegI src1, iRegI src2, iRegI temp, flagsReg cr) %{ | |
4475 instruction_count(1); multiple_bundles; | |
4476 dst : E(write); | |
4477 temp : E(write); | |
4478 src1 : R(read); | |
4479 src2 : R(read); | |
4480 temp : R(read); | |
4481 MS : R(38); | |
4482 %} | |
4483 | |
4484 // Integer Divide reg-imm | |
4485 pipe_class sdiv_reg_imm(iRegI dst, iRegI src1, immI13 src2, iRegI temp, flagsReg cr) %{ | |
4486 instruction_count(1); multiple_bundles; | |
4487 dst : E(write); | |
4488 temp : E(write); | |
4489 src1 : R(read); | |
4490 temp : R(read); | |
4491 MS : R(38); | |
4492 %} | |
4493 | |
4494 // Long Divide | |
4495 pipe_class divL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
4496 dst : E(write)+71; | |
4497 src1 : R(read); | |
4498 src2 : R(read)+1; | |
4499 MS : R(70); | |
4500 %} | |
4501 | |
4502 pipe_class divL_reg_imm(iRegL dst, iRegL src1, immL13 src2) %{ | |
4503 dst : E(write)+71; | |
4504 src1 : R(read); | |
4505 MS : R(70); | |
4506 %} | |
4507 | |
4508 // Floating Point Add Float | |
4509 pipe_class faddF_reg_reg(regF dst, regF src1, regF src2) %{ | |
4510 single_instruction; | |
4511 dst : X(write); | |
4512 src1 : E(read); | |
4513 src2 : E(read); | |
4514 FA : R; | |
4515 %} | |
4516 | |
4517 // Floating Point Add Double | |
4518 pipe_class faddD_reg_reg(regD dst, regD src1, regD src2) %{ | |
4519 single_instruction; | |
4520 dst : X(write); | |
4521 src1 : E(read); | |
4522 src2 : E(read); | |
4523 FA : R; | |
4524 %} | |
4525 | |
4526 // Floating Point Conditional Move based on integer flags | |
4527 pipe_class int_conditional_float_move (cmpOp cmp, flagsReg cr, regF dst, regF src) %{ | |
4528 single_instruction; | |
4529 dst : X(write); | |
4530 src : E(read); | |
4531 cr : R(read); | |
4532 FA : R(2); | |
4533 BR : R(2); | |
4534 %} | |
4535 | |
4536 // Floating Point Conditional Move based on integer flags | |
4537 pipe_class int_conditional_double_move (cmpOp cmp, flagsReg cr, regD dst, regD src) %{ | |
4538 single_instruction; | |
4539 dst : X(write); | |
4540 src : E(read); | |
4541 cr : R(read); | |
4542 FA : R(2); | |
4543 BR : R(2); | |
4544 %} | |
4545 | |
4546 // Floating Point Multiply Float | |
4547 pipe_class fmulF_reg_reg(regF dst, regF src1, regF src2) %{ | |
4548 single_instruction; | |
4549 dst : X(write); | |
4550 src1 : E(read); | |
4551 src2 : E(read); | |
4552 FM : R; | |
4553 %} | |
4554 | |
4555 // Floating Point Multiply Double | |
4556 pipe_class fmulD_reg_reg(regD dst, regD src1, regD src2) %{ | |
4557 single_instruction; | |
4558 dst : X(write); | |
4559 src1 : E(read); | |
4560 src2 : E(read); | |
4561 FM : R; | |
4562 %} | |
4563 | |
4564 // Floating Point Divide Float | |
4565 pipe_class fdivF_reg_reg(regF dst, regF src1, regF src2) %{ | |
4566 single_instruction; | |
4567 dst : X(write); | |
4568 src1 : E(read); | |
4569 src2 : E(read); | |
4570 FM : R; | |
4571 FDIV : C(14); | |
4572 %} | |
4573 | |
4574 // Floating Point Divide Double | |
4575 pipe_class fdivD_reg_reg(regD dst, regD src1, regD src2) %{ | |
4576 single_instruction; | |
4577 dst : X(write); | |
4578 src1 : E(read); | |
4579 src2 : E(read); | |
4580 FM : R; | |
4581 FDIV : C(17); | |
4582 %} | |
4583 | |
4584 // Floating Point Move/Negate/Abs Float | |
4585 pipe_class faddF_reg(regF dst, regF src) %{ | |
4586 single_instruction; | |
4587 dst : W(write); | |
4588 src : E(read); | |
4589 FA : R(1); | |
4590 %} | |
4591 | |
4592 // Floating Point Move/Negate/Abs Double | |
4593 pipe_class faddD_reg(regD dst, regD src) %{ | |
4594 single_instruction; | |
4595 dst : W(write); | |
4596 src : E(read); | |
4597 FA : R; | |
4598 %} | |
4599 | |
4600 // Floating Point Convert F->D | |
4601 pipe_class fcvtF2D(regD dst, regF src) %{ | |
4602 single_instruction; | |
4603 dst : X(write); | |
4604 src : E(read); | |
4605 FA : R; | |
4606 %} | |
4607 | |
4608 // Floating Point Convert I->D | |
4609 pipe_class fcvtI2D(regD dst, regF src) %{ | |
4610 single_instruction; | |
4611 dst : X(write); | |
4612 src : E(read); | |
4613 FA : R; | |
4614 %} | |
4615 | |
4616 // Floating Point Convert LHi->D | |
4617 pipe_class fcvtLHi2D(regD dst, regD src) %{ | |
4618 single_instruction; | |
4619 dst : X(write); | |
4620 src : E(read); | |
4621 FA : R; | |
4622 %} | |
4623 | |
4624 // Floating Point Convert L->D | |
4625 pipe_class fcvtL2D(regD dst, regF src) %{ | |
4626 single_instruction; | |
4627 dst : X(write); | |
4628 src : E(read); | |
4629 FA : R; | |
4630 %} | |
4631 | |
4632 // Floating Point Convert L->F | |
4633 pipe_class fcvtL2F(regD dst, regF src) %{ | |
4634 single_instruction; | |
4635 dst : X(write); | |
4636 src : E(read); | |
4637 FA : R; | |
4638 %} | |
4639 | |
4640 // Floating Point Convert D->F | |
4641 pipe_class fcvtD2F(regD dst, regF src) %{ | |
4642 single_instruction; | |
4643 dst : X(write); | |
4644 src : E(read); | |
4645 FA : R; | |
4646 %} | |
4647 | |
4648 // Floating Point Convert I->L | |
4649 pipe_class fcvtI2L(regD dst, regF src) %{ | |
4650 single_instruction; | |
4651 dst : X(write); | |
4652 src : E(read); | |
4653 FA : R; | |
4654 %} | |
4655 | |
4656 // Floating Point Convert D->F | |
4657 pipe_class fcvtD2I(regF dst, regD src, flagsReg cr) %{ | |
4658 instruction_count(1); multiple_bundles; | |
4659 dst : X(write)+6; | |
4660 src : E(read); | |
4661 FA : R; | |
4662 %} | |
4663 | |
4664 // Floating Point Convert D->L | |
4665 pipe_class fcvtD2L(regD dst, regD src, flagsReg cr) %{ | |
4666 instruction_count(1); multiple_bundles; | |
4667 dst : X(write)+6; | |
4668 src : E(read); | |
4669 FA : R; | |
4670 %} | |
4671 | |
4672 // Floating Point Convert F->I | |
4673 pipe_class fcvtF2I(regF dst, regF src, flagsReg cr) %{ | |
4674 instruction_count(1); multiple_bundles; | |
4675 dst : X(write)+6; | |
4676 src : E(read); | |
4677 FA : R; | |
4678 %} | |
4679 | |
4680 // Floating Point Convert F->L | |
4681 pipe_class fcvtF2L(regD dst, regF src, flagsReg cr) %{ | |
4682 instruction_count(1); multiple_bundles; | |
4683 dst : X(write)+6; | |
4684 src : E(read); | |
4685 FA : R; | |
4686 %} | |
4687 | |
4688 // Floating Point Convert I->F | |
4689 pipe_class fcvtI2F(regF dst, regF src) %{ | |
4690 single_instruction; | |
4691 dst : X(write); | |
4692 src : E(read); | |
4693 FA : R; | |
4694 %} | |
4695 | |
4696 // Floating Point Compare | |
4697 pipe_class faddF_fcc_reg_reg_zero(flagsRegF cr, regF src1, regF src2, immI0 zero) %{ | |
4698 single_instruction; | |
4699 cr : X(write); | |
4700 src1 : E(read); | |
4701 src2 : E(read); | |
4702 FA : R; | |
4703 %} | |
4704 | |
4705 // Floating Point Compare | |
4706 pipe_class faddD_fcc_reg_reg_zero(flagsRegF cr, regD src1, regD src2, immI0 zero) %{ | |
4707 single_instruction; | |
4708 cr : X(write); | |
4709 src1 : E(read); | |
4710 src2 : E(read); | |
4711 FA : R; | |
4712 %} | |
4713 | |
4714 // Floating Add Nop | |
4715 pipe_class fadd_nop() %{ | |
4716 single_instruction; | |
4717 FA : R; | |
4718 %} | |
4719 | |
4720 // Integer Store to Memory | |
4721 pipe_class istore_mem_reg(memory mem, iRegI src) %{ | |
4722 single_instruction; | |
4723 mem : R(read); | |
4724 src : C(read); | |
4725 MS : R; | |
4726 %} | |
4727 | |
4728 // Integer Store to Memory | |
4729 pipe_class istore_mem_spORreg(memory mem, sp_ptr_RegP src) %{ | |
4730 single_instruction; | |
4731 mem : R(read); | |
4732 src : C(read); | |
4733 MS : R; | |
4734 %} | |
4735 | |
4736 // Integer Store Zero to Memory | |
4737 pipe_class istore_mem_zero(memory mem, immI0 src) %{ | |
4738 single_instruction; | |
4739 mem : R(read); | |
4740 MS : R; | |
4741 %} | |
4742 | |
4743 // Special Stack Slot Store | |
4744 pipe_class istore_stk_reg(stackSlotI stkSlot, iRegI src) %{ | |
4745 single_instruction; | |
4746 stkSlot : R(read); | |
4747 src : C(read); | |
4748 MS : R; | |
4749 %} | |
4750 | |
4751 // Special Stack Slot Store | |
4752 pipe_class lstoreI_stk_reg(stackSlotL stkSlot, iRegI src) %{ | |
4753 instruction_count(2); multiple_bundles; | |
4754 stkSlot : R(read); | |
4755 src : C(read); | |
4756 MS : R(2); | |
4757 %} | |
4758 | |
4759 // Float Store | |
4760 pipe_class fstoreF_mem_reg(memory mem, RegF src) %{ | |
4761 single_instruction; | |
4762 mem : R(read); | |
4763 src : C(read); | |
4764 MS : R; | |
4765 %} | |
4766 | |
4767 // Float Store | |
4768 pipe_class fstoreF_mem_zero(memory mem, immF0 src) %{ | |
4769 single_instruction; | |
4770 mem : R(read); | |
4771 MS : R; | |
4772 %} | |
4773 | |
4774 // Double Store | |
4775 pipe_class fstoreD_mem_reg(memory mem, RegD src) %{ | |
4776 instruction_count(1); | |
4777 mem : R(read); | |
4778 src : C(read); | |
4779 MS : R; | |
4780 %} | |
4781 | |
4782 // Double Store | |
4783 pipe_class fstoreD_mem_zero(memory mem, immD0 src) %{ | |
4784 single_instruction; | |
4785 mem : R(read); | |
4786 MS : R; | |
4787 %} | |
4788 | |
4789 // Special Stack Slot Float Store | |
4790 pipe_class fstoreF_stk_reg(stackSlotI stkSlot, RegF src) %{ | |
4791 single_instruction; | |
4792 stkSlot : R(read); | |
4793 src : C(read); | |
4794 MS : R; | |
4795 %} | |
4796 | |
4797 // Special Stack Slot Double Store | |
4798 pipe_class fstoreD_stk_reg(stackSlotI stkSlot, RegD src) %{ | |
4799 single_instruction; | |
4800 stkSlot : R(read); | |
4801 src : C(read); | |
4802 MS : R; | |
4803 %} | |
4804 | |
4805 // Integer Load (when sign bit propagation not needed) | |
4806 pipe_class iload_mem(iRegI dst, memory mem) %{ | |
4807 single_instruction; | |
4808 mem : R(read); | |
4809 dst : C(write); | |
4810 MS : R; | |
4811 %} | |
4812 | |
4813 // Integer Load from stack operand | |
4814 pipe_class iload_stkD(iRegI dst, stackSlotD mem ) %{ | |
4815 single_instruction; | |
4816 mem : R(read); | |
4817 dst : C(write); | |
4818 MS : R; | |
4819 %} | |
4820 | |
4821 // Integer Load (when sign bit propagation or masking is needed) | |
4822 pipe_class iload_mask_mem(iRegI dst, memory mem) %{ | |
4823 single_instruction; | |
4824 mem : R(read); | |
4825 dst : M(write); | |
4826 MS : R; | |
4827 %} | |
4828 | |
4829 // Float Load | |
4830 pipe_class floadF_mem(regF dst, memory mem) %{ | |
4831 single_instruction; | |
4832 mem : R(read); | |
4833 dst : M(write); | |
4834 MS : R; | |
4835 %} | |
4836 | |
4837 // Float Load | |
4838 pipe_class floadD_mem(regD dst, memory mem) %{ | |
4839 instruction_count(1); multiple_bundles; // Again, unaligned argument is only multiple case | |
4840 mem : R(read); | |
4841 dst : M(write); | |
4842 MS : R; | |
4843 %} | |
4844 | |
4845 // Float Load | |
4846 pipe_class floadF_stk(regF dst, stackSlotI stkSlot) %{ | |
4847 single_instruction; | |
4848 stkSlot : R(read); | |
4849 dst : M(write); | |
4850 MS : R; | |
4851 %} | |
4852 | |
4853 // Float Load | |
4854 pipe_class floadD_stk(regD dst, stackSlotI stkSlot) %{ | |
4855 single_instruction; | |
4856 stkSlot : R(read); | |
4857 dst : M(write); | |
4858 MS : R; | |
4859 %} | |
4860 | |
4861 // Memory Nop | |
4862 pipe_class mem_nop() %{ | |
4863 single_instruction; | |
4864 MS : R; | |
4865 %} | |
4866 | |
4867 pipe_class sethi(iRegP dst, immI src) %{ | |
4868 single_instruction; | |
4869 dst : E(write); | |
4870 IALU : R; | |
4871 %} | |
4872 | |
4873 pipe_class loadPollP(iRegP poll) %{ | |
4874 single_instruction; | |
4875 poll : R(read); | |
4876 MS : R; | |
4877 %} | |
4878 | |
4879 pipe_class br(Universe br, label labl) %{ | |
4880 single_instruction_with_delay_slot; | |
4881 BR : R; | |
4882 %} | |
4883 | |
4884 pipe_class br_cc(Universe br, cmpOp cmp, flagsReg cr, label labl) %{ | |
4885 single_instruction_with_delay_slot; | |
4886 cr : E(read); | |
4887 BR : R; | |
4888 %} | |
4889 | |
4890 pipe_class br_reg(Universe br, cmpOp cmp, iRegI op1, label labl) %{ | |
4891 single_instruction_with_delay_slot; | |
4892 op1 : E(read); | |
4893 BR : R; | |
4894 MS : R; | |
4895 %} | |
4896 | |
4897 pipe_class br_fcc(Universe br, cmpOpF cc, flagsReg cr, label labl) %{ | |
4898 single_instruction_with_delay_slot; | |
4899 cr : E(read); | |
4900 BR : R; | |
4901 %} | |
4902 | |
4903 pipe_class br_nop() %{ | |
4904 single_instruction; | |
4905 BR : R; | |
4906 %} | |
4907 | |
4908 pipe_class simple_call(method meth) %{ | |
4909 instruction_count(2); multiple_bundles; force_serialization; | |
4910 fixed_latency(100); | |
4911 BR : R(1); | |
4912 MS : R(1); | |
4913 A0 : R(1); | |
4914 %} | |
4915 | |
4916 pipe_class compiled_call(method meth) %{ | |
4917 instruction_count(1); multiple_bundles; force_serialization; | |
4918 fixed_latency(100); | |
4919 MS : R(1); | |
4920 %} | |
4921 | |
4922 pipe_class call(method meth) %{ | |
4923 instruction_count(0); multiple_bundles; force_serialization; | |
4924 fixed_latency(100); | |
4925 %} | |
4926 | |
4927 pipe_class tail_call(Universe ignore, label labl) %{ | |
4928 single_instruction; has_delay_slot; | |
4929 fixed_latency(100); | |
4930 BR : R(1); | |
4931 MS : R(1); | |
4932 %} | |
4933 | |
4934 pipe_class ret(Universe ignore) %{ | |
4935 single_instruction; has_delay_slot; | |
4936 BR : R(1); | |
4937 MS : R(1); | |
4938 %} | |
4939 | |
4940 pipe_class ret_poll(g3RegP poll) %{ | |
4941 instruction_count(3); has_delay_slot; | |
4942 poll : E(read); | |
4943 MS : R; | |
4944 %} | |
4945 | |
4946 // The real do-nothing guy | |
4947 pipe_class empty( ) %{ | |
4948 instruction_count(0); | |
4949 %} | |
4950 | |
4951 pipe_class long_memory_op() %{ | |
4952 instruction_count(0); multiple_bundles; force_serialization; | |
4953 fixed_latency(25); | |
4954 MS : R(1); | |
4955 %} | |
4956 | |
4957 // Check-cast | |
4958 pipe_class partial_subtype_check_pipe(Universe ignore, iRegP array, iRegP match ) %{ | |
4959 array : R(read); | |
4960 match : R(read); | |
4961 IALU : R(2); | |
4962 BR : R(2); | |
4963 MS : R; | |
4964 %} | |
4965 | |
4966 // Convert FPU flags into +1,0,-1 | |
4967 pipe_class floating_cmp( iRegI dst, regF src1, regF src2 ) %{ | |
4968 src1 : E(read); | |
4969 src2 : E(read); | |
4970 dst : E(write); | |
4971 FA : R; | |
4972 MS : R(2); | |
4973 BR : R(2); | |
4974 %} | |
4975 | |
4976 // Compare for p < q, and conditionally add y | |
4977 pipe_class cadd_cmpltmask( iRegI p, iRegI q, iRegI y ) %{ | |
4978 p : E(read); | |
4979 q : E(read); | |
4980 y : E(read); | |
4981 IALU : R(3) | |
4982 %} | |
4983 | |
4984 // Perform a compare, then move conditionally in a branch delay slot. | |
4985 pipe_class min_max( iRegI src2, iRegI srcdst ) %{ | |
4986 src2 : E(read); | |
4987 srcdst : E(read); | |
4988 IALU : R; | |
4989 BR : R; | |
4990 %} | |
4991 | |
4992 // Define the class for the Nop node | |
4993 define %{ | |
4994 MachNop = ialu_nop; | |
4995 %} | |
4996 | |
4997 %} | |
4998 | |
4999 //----------INSTRUCTIONS------------------------------------------------------- | |
5000 | |
5001 //------------Special Stack Slot instructions - no match rules----------------- | |
5002 instruct stkI_to_regF(regF dst, stackSlotI src) %{ | |
5003 // No match rule to avoid chain rule match. | |
5004 effect(DEF dst, USE src); | |
5005 ins_cost(MEMORY_REF_COST); | |
5006 size(4); | |
5007 format %{ "LDF $src,$dst\t! stkI to regF" %} | |
5008 opcode(Assembler::ldf_op3); | |
5009 ins_encode(form3_mem_reg(src, dst)); | |
5010 ins_pipe(floadF_stk); | |
5011 %} | |
5012 | |
5013 instruct stkL_to_regD(regD dst, stackSlotL src) %{ | |
5014 // No match rule to avoid chain rule match. | |
5015 effect(DEF dst, USE src); | |
5016 ins_cost(MEMORY_REF_COST); | |
5017 size(4); | |
5018 format %{ "LDDF $src,$dst\t! stkL to regD" %} | |
5019 opcode(Assembler::lddf_op3); | |
5020 ins_encode(form3_mem_reg(src, dst)); | |
5021 ins_pipe(floadD_stk); | |
5022 %} | |
5023 | |
5024 instruct regF_to_stkI(stackSlotI dst, regF src) %{ | |
5025 // No match rule to avoid chain rule match. | |
5026 effect(DEF dst, USE src); | |
5027 ins_cost(MEMORY_REF_COST); | |
5028 size(4); | |
5029 format %{ "STF $src,$dst\t! regF to stkI" %} | |
5030 opcode(Assembler::stf_op3); | |
5031 ins_encode(form3_mem_reg(dst, src)); | |
5032 ins_pipe(fstoreF_stk_reg); | |
5033 %} | |
5034 | |
5035 instruct regD_to_stkL(stackSlotL dst, regD src) %{ | |
5036 // No match rule to avoid chain rule match. | |
5037 effect(DEF dst, USE src); | |
5038 ins_cost(MEMORY_REF_COST); | |
5039 size(4); | |
5040 format %{ "STDF $src,$dst\t! regD to stkL" %} | |
5041 opcode(Assembler::stdf_op3); | |
5042 ins_encode(form3_mem_reg(dst, src)); | |
5043 ins_pipe(fstoreD_stk_reg); | |
5044 %} | |
5045 | |
5046 instruct regI_to_stkLHi(stackSlotL dst, iRegI src) %{ | |
5047 effect(DEF dst, USE src); | |
5048 ins_cost(MEMORY_REF_COST*2); | |
5049 size(8); | |
5050 format %{ "STW $src,$dst.hi\t! long\n\t" | |
5051 "STW R_G0,$dst.lo" %} | |
5052 opcode(Assembler::stw_op3); | |
5053 ins_encode(form3_mem_reg(dst, src), form3_mem_plus_4_reg(dst, R_G0)); | |
5054 ins_pipe(lstoreI_stk_reg); | |
5055 %} | |
5056 | |
5057 instruct regL_to_stkD(stackSlotD dst, iRegL src) %{ | |
5058 // No match rule to avoid chain rule match. | |
5059 effect(DEF dst, USE src); | |
5060 ins_cost(MEMORY_REF_COST); | |
5061 size(4); | |
5062 format %{ "STX $src,$dst\t! regL to stkD" %} | |
5063 opcode(Assembler::stx_op3); | |
5064 ins_encode( form3_mem_reg( dst, src ) ); | |
5065 ins_pipe(istore_stk_reg); | |
5066 %} | |
5067 | |
5068 //---------- Chain stack slots between similar types -------- | |
5069 | |
5070 // Load integer from stack slot | |
5071 instruct stkI_to_regI( iRegI dst, stackSlotI src ) %{ | |
5072 match(Set dst src); | |
5073 ins_cost(MEMORY_REF_COST); | |
5074 | |
5075 size(4); | |
5076 format %{ "LDUW $src,$dst\t!stk" %} | |
5077 opcode(Assembler::lduw_op3); | |
5078 ins_encode( form3_mem_reg( src, dst ) ); | |
5079 ins_pipe(iload_mem); | |
5080 %} | |
5081 | |
5082 // Store integer to stack slot | |
5083 instruct regI_to_stkI( stackSlotI dst, iRegI src ) %{ | |
5084 match(Set dst src); | |
5085 ins_cost(MEMORY_REF_COST); | |
5086 | |
5087 size(4); | |
5088 format %{ "STW $src,$dst\t!stk" %} | |
5089 opcode(Assembler::stw_op3); | |
5090 ins_encode( form3_mem_reg( dst, src ) ); | |
5091 ins_pipe(istore_mem_reg); | |
5092 %} | |
5093 | |
5094 // Load long from stack slot | |
5095 instruct stkL_to_regL( iRegL dst, stackSlotL src ) %{ | |
5096 match(Set dst src); | |
5097 | |
5098 ins_cost(MEMORY_REF_COST); | |
5099 size(4); | |
5100 format %{ "LDX $src,$dst\t! long" %} | |
5101 opcode(Assembler::ldx_op3); | |
5102 ins_encode( form3_mem_reg( src, dst ) ); | |
5103 ins_pipe(iload_mem); | |
5104 %} | |
5105 | |
5106 // Store long to stack slot | |
5107 instruct regL_to_stkL(stackSlotL dst, iRegL src) %{ | |
5108 match(Set dst src); | |
5109 | |
5110 ins_cost(MEMORY_REF_COST); | |
5111 size(4); | |
5112 format %{ "STX $src,$dst\t! long" %} | |
5113 opcode(Assembler::stx_op3); | |
5114 ins_encode( form3_mem_reg( dst, src ) ); | |
5115 ins_pipe(istore_mem_reg); | |
5116 %} | |
5117 | |
5118 #ifdef _LP64 | |
5119 // Load pointer from stack slot, 64-bit encoding | |
5120 instruct stkP_to_regP( iRegP dst, stackSlotP src ) %{ | |
5121 match(Set dst src); | |
5122 ins_cost(MEMORY_REF_COST); | |
5123 size(4); | |
5124 format %{ "LDX $src,$dst\t!ptr" %} | |
5125 opcode(Assembler::ldx_op3); | |
5126 ins_encode( form3_mem_reg( src, dst ) ); | |
5127 ins_pipe(iload_mem); | |
5128 %} | |
5129 | |
5130 // Store pointer to stack slot | |
5131 instruct regP_to_stkP(stackSlotP dst, iRegP src) %{ | |
5132 match(Set dst src); | |
5133 ins_cost(MEMORY_REF_COST); | |
5134 size(4); | |
5135 format %{ "STX $src,$dst\t!ptr" %} | |
5136 opcode(Assembler::stx_op3); | |
5137 ins_encode( form3_mem_reg( dst, src ) ); | |
5138 ins_pipe(istore_mem_reg); | |
5139 %} | |
5140 #else // _LP64 | |
5141 // Load pointer from stack slot, 32-bit encoding | |
5142 instruct stkP_to_regP( iRegP dst, stackSlotP src ) %{ | |
5143 match(Set dst src); | |
5144 ins_cost(MEMORY_REF_COST); | |
5145 format %{ "LDUW $src,$dst\t!ptr" %} | |
5146 opcode(Assembler::lduw_op3, Assembler::ldst_op); | |
5147 ins_encode( form3_mem_reg( src, dst ) ); | |
5148 ins_pipe(iload_mem); | |
5149 %} | |
5150 | |
5151 // Store pointer to stack slot | |
5152 instruct regP_to_stkP(stackSlotP dst, iRegP src) %{ | |
5153 match(Set dst src); | |
5154 ins_cost(MEMORY_REF_COST); | |
5155 format %{ "STW $src,$dst\t!ptr" %} | |
5156 opcode(Assembler::stw_op3, Assembler::ldst_op); | |
5157 ins_encode( form3_mem_reg( dst, src ) ); | |
5158 ins_pipe(istore_mem_reg); | |
5159 %} | |
5160 #endif // _LP64 | |
5161 | |
5162 //------------Special Nop instructions for bundling - no match rules----------- | |
5163 // Nop using the A0 functional unit | |
5164 instruct Nop_A0() %{ | |
5165 ins_cost(0); | |
5166 | |
5167 format %{ "NOP ! Alu Pipeline" %} | |
5168 opcode(Assembler::or_op3, Assembler::arith_op); | |
5169 ins_encode( form2_nop() ); | |
5170 ins_pipe(ialu_nop_A0); | |
5171 %} | |
5172 | |
5173 // Nop using the A1 functional unit | |
5174 instruct Nop_A1( ) %{ | |
5175 ins_cost(0); | |
5176 | |
5177 format %{ "NOP ! Alu Pipeline" %} | |
5178 opcode(Assembler::or_op3, Assembler::arith_op); | |
5179 ins_encode( form2_nop() ); | |
5180 ins_pipe(ialu_nop_A1); | |
5181 %} | |
5182 | |
5183 // Nop using the memory functional unit | |
5184 instruct Nop_MS( ) %{ | |
5185 ins_cost(0); | |
5186 | |
5187 format %{ "NOP ! Memory Pipeline" %} | |
5188 ins_encode( emit_mem_nop ); | |
5189 ins_pipe(mem_nop); | |
5190 %} | |
5191 | |
5192 // Nop using the floating add functional unit | |
5193 instruct Nop_FA( ) %{ | |
5194 ins_cost(0); | |
5195 | |
5196 format %{ "NOP ! Floating Add Pipeline" %} | |
5197 ins_encode( emit_fadd_nop ); | |
5198 ins_pipe(fadd_nop); | |
5199 %} | |
5200 | |
5201 // Nop using the branch functional unit | |
5202 instruct Nop_BR( ) %{ | |
5203 ins_cost(0); | |
5204 | |
5205 format %{ "NOP ! Branch Pipeline" %} | |
5206 ins_encode( emit_br_nop ); | |
5207 ins_pipe(br_nop); | |
5208 %} | |
5209 | |
5210 //----------Load/Store/Move Instructions--------------------------------------- | |
5211 //----------Load Instructions-------------------------------------------------- | |
5212 // Load Byte (8bit signed) | |
5213 instruct loadB(iRegI dst, memory mem) %{ | |
5214 match(Set dst (LoadB mem)); | |
5215 ins_cost(MEMORY_REF_COST); | |
5216 | |
5217 size(4); | |
5218 format %{ "LDSB $mem,$dst" %} | |
5219 opcode(Assembler::ldsb_op3); | |
5220 ins_encode( form3_mem_reg( mem, dst ) ); | |
5221 ins_pipe(iload_mask_mem); | |
5222 %} | |
5223 | |
5224 // Load Byte (8bit UNsigned) into an int reg | |
5225 instruct loadUB(iRegI dst, memory mem, immI_255 bytemask) %{ | |
5226 match(Set dst (AndI (LoadB mem) bytemask)); | |
5227 ins_cost(MEMORY_REF_COST); | |
5228 | |
5229 size(4); | |
5230 format %{ "LDUB $mem,$dst" %} | |
5231 opcode(Assembler::ldub_op3); | |
5232 ins_encode( form3_mem_reg( mem, dst ) ); | |
5233 ins_pipe(iload_mask_mem); | |
5234 %} | |
5235 | |
5236 // Load Byte (8bit UNsigned) into a Long Register | |
5237 instruct loadUBL(iRegL dst, memory mem, immL_FF bytemask) %{ | |
5238 match(Set dst (AndL (ConvI2L (LoadB mem)) bytemask)); | |
5239 ins_cost(MEMORY_REF_COST); | |
5240 | |
5241 size(4); | |
5242 format %{ "LDUB $mem,$dst" %} | |
5243 opcode(Assembler::ldub_op3); | |
5244 ins_encode( form3_mem_reg( mem, dst ) ); | |
5245 ins_pipe(iload_mask_mem); | |
5246 %} | |
5247 | |
5248 // Load Char (16bit UNsigned) into a Long Register | |
5249 instruct loadUCL(iRegL dst, memory mem, immL_FFFF bytemask) %{ | |
5250 match(Set dst (AndL (ConvI2L (LoadC mem)) bytemask)); | |
5251 ins_cost(MEMORY_REF_COST); | |
5252 | |
5253 size(4); | |
5254 format %{ "LDUH $mem,$dst" %} | |
5255 opcode(Assembler::lduh_op3); | |
5256 ins_encode( form3_mem_reg( mem, dst ) ); | |
5257 ins_pipe(iload_mask_mem); | |
5258 %} | |
5259 | |
5260 // Load Char (16bit unsigned) | |
5261 instruct loadC(iRegI dst, memory mem) %{ | |
5262 match(Set dst (LoadC mem)); | |
5263 ins_cost(MEMORY_REF_COST); | |
5264 | |
5265 size(4); | |
5266 format %{ "LDUH $mem,$dst" %} | |
5267 opcode(Assembler::lduh_op3); | |
5268 ins_encode( form3_mem_reg( mem, dst ) ); | |
5269 ins_pipe(iload_mask_mem); | |
5270 %} | |
5271 | |
5272 // Load Integer | |
5273 instruct loadI(iRegI dst, memory mem) %{ | |
5274 match(Set dst (LoadI mem)); | |
5275 ins_cost(MEMORY_REF_COST); | |
5276 size(4); | |
5277 | |
5278 format %{ "LDUW $mem,$dst" %} | |
5279 opcode(Assembler::lduw_op3); | |
5280 ins_encode( form3_mem_reg( mem, dst ) ); | |
5281 ins_pipe(iload_mem); | |
5282 %} | |
5283 | |
5284 // Load Long - aligned | |
5285 instruct loadL(iRegL dst, memory mem ) %{ | |
5286 match(Set dst (LoadL mem)); | |
5287 ins_cost(MEMORY_REF_COST); | |
5288 size(4); | |
5289 format %{ "LDX $mem,$dst\t! long" %} | |
5290 opcode(Assembler::ldx_op3); | |
5291 ins_encode( form3_mem_reg( mem, dst ) ); | |
5292 ins_pipe(iload_mem); | |
5293 %} | |
5294 | |
5295 // Load Long - UNaligned | |
5296 instruct loadL_unaligned(iRegL dst, memory mem, o7RegI tmp) %{ | |
5297 match(Set dst (LoadL_unaligned mem)); | |
5298 effect(KILL tmp); | |
5299 ins_cost(MEMORY_REF_COST*2+DEFAULT_COST); | |
5300 size(16); | |
5301 format %{ "LDUW $mem+4,R_O7\t! misaligned long\n" | |
5302 "\tLDUW $mem ,$dst\n" | |
5303 "\tSLLX #32, $dst, $dst\n" | |
5304 "\tOR $dst, R_O7, $dst" %} | |
5305 opcode(Assembler::lduw_op3); | |
5306 ins_encode( form3_mem_reg_long_unaligned_marshal( mem, dst )); | |
5307 ins_pipe(iload_mem); | |
5308 %} | |
5309 | |
5310 // Load Aligned Packed Byte into a Double Register | |
5311 instruct loadA8B(regD dst, memory mem) %{ | |
5312 match(Set dst (Load8B mem)); | |
5313 ins_cost(MEMORY_REF_COST); | |
5314 size(4); | |
5315 format %{ "LDDF $mem,$dst\t! packed8B" %} | |
5316 opcode(Assembler::lddf_op3); | |
5317 ins_encode( form3_mem_reg( mem, dst ) ); | |
5318 ins_pipe(floadD_mem); | |
5319 %} | |
5320 | |
5321 // Load Aligned Packed Char into a Double Register | |
5322 instruct loadA4C(regD dst, memory mem) %{ | |
5323 match(Set dst (Load4C mem)); | |
5324 ins_cost(MEMORY_REF_COST); | |
5325 size(4); | |
5326 format %{ "LDDF $mem,$dst\t! packed4C" %} | |
5327 opcode(Assembler::lddf_op3); | |
5328 ins_encode( form3_mem_reg( mem, dst ) ); | |
5329 ins_pipe(floadD_mem); | |
5330 %} | |
5331 | |
5332 // Load Aligned Packed Short into a Double Register | |
5333 instruct loadA4S(regD dst, memory mem) %{ | |
5334 match(Set dst (Load4S mem)); | |
5335 ins_cost(MEMORY_REF_COST); | |
5336 size(4); | |
5337 format %{ "LDDF $mem,$dst\t! packed4S" %} | |
5338 opcode(Assembler::lddf_op3); | |
5339 ins_encode( form3_mem_reg( mem, dst ) ); | |
5340 ins_pipe(floadD_mem); | |
5341 %} | |
5342 | |
5343 // Load Aligned Packed Int into a Double Register | |
5344 instruct loadA2I(regD dst, memory mem) %{ | |
5345 match(Set dst (Load2I mem)); | |
5346 ins_cost(MEMORY_REF_COST); | |
5347 size(4); | |
5348 format %{ "LDDF $mem,$dst\t! packed2I" %} | |
5349 opcode(Assembler::lddf_op3); | |
5350 ins_encode( form3_mem_reg( mem, dst ) ); | |
5351 ins_pipe(floadD_mem); | |
5352 %} | |
5353 | |
5354 // Load Range | |
5355 instruct loadRange(iRegI dst, memory mem) %{ | |
5356 match(Set dst (LoadRange mem)); | |
5357 ins_cost(MEMORY_REF_COST); | |
5358 | |
5359 size(4); | |
5360 format %{ "LDUW $mem,$dst\t! range" %} | |
5361 opcode(Assembler::lduw_op3); | |
5362 ins_encode( form3_mem_reg( mem, dst ) ); | |
5363 ins_pipe(iload_mem); | |
5364 %} | |
5365 | |
5366 // Load Integer into %f register (for fitos/fitod) | |
5367 instruct loadI_freg(regF dst, memory mem) %{ | |
5368 match(Set dst (LoadI mem)); | |
5369 ins_cost(MEMORY_REF_COST); | |
5370 size(4); | |
5371 | |
5372 format %{ "LDF $mem,$dst\t! for fitos/fitod" %} | |
5373 opcode(Assembler::ldf_op3); | |
5374 ins_encode( form3_mem_reg( mem, dst ) ); | |
5375 ins_pipe(floadF_mem); | |
5376 %} | |
5377 | |
5378 // Load Pointer | |
5379 instruct loadP(iRegP dst, memory mem) %{ | |
5380 match(Set dst (LoadP mem)); | |
5381 ins_cost(MEMORY_REF_COST); | |
5382 size(4); | |
5383 | |
5384 #ifndef _LP64 | |
5385 format %{ "LDUW $mem,$dst\t! ptr" %} | |
5386 opcode(Assembler::lduw_op3, 0, REGP_OP); | |
5387 #else | |
5388 format %{ "LDX $mem,$dst\t! ptr" %} | |
5389 opcode(Assembler::ldx_op3, 0, REGP_OP); | |
5390 #endif | |
5391 ins_encode( form3_mem_reg( mem, dst ) ); | |
5392 ins_pipe(iload_mem); | |
5393 %} | |
5394 | |
5395 // Load Klass Pointer | |
5396 instruct loadKlass(iRegP dst, memory mem) %{ | |
5397 match(Set dst (LoadKlass mem)); | |
5398 ins_cost(MEMORY_REF_COST); | |
5399 size(4); | |
5400 | |
5401 #ifndef _LP64 | |
5402 format %{ "LDUW $mem,$dst\t! klass ptr" %} | |
5403 opcode(Assembler::lduw_op3, 0, REGP_OP); | |
5404 #else | |
5405 format %{ "LDX $mem,$dst\t! klass ptr" %} | |
5406 opcode(Assembler::ldx_op3, 0, REGP_OP); | |
5407 #endif | |
5408 ins_encode( form3_mem_reg( mem, dst ) ); | |
5409 ins_pipe(iload_mem); | |
5410 %} | |
5411 | |
5412 // Load Short (16bit signed) | |
5413 instruct loadS(iRegI dst, memory mem) %{ | |
5414 match(Set dst (LoadS mem)); | |
5415 ins_cost(MEMORY_REF_COST); | |
5416 | |
5417 size(4); | |
5418 format %{ "LDSH $mem,$dst" %} | |
5419 opcode(Assembler::ldsh_op3); | |
5420 ins_encode( form3_mem_reg( mem, dst ) ); | |
5421 ins_pipe(iload_mask_mem); | |
5422 %} | |
5423 | |
5424 // Load Double | |
5425 instruct loadD(regD dst, memory mem) %{ | |
5426 match(Set dst (LoadD mem)); | |
5427 ins_cost(MEMORY_REF_COST); | |
5428 | |
5429 size(4); | |
5430 format %{ "LDDF $mem,$dst" %} | |
5431 opcode(Assembler::lddf_op3); | |
5432 ins_encode( form3_mem_reg( mem, dst ) ); | |
5433 ins_pipe(floadD_mem); | |
5434 %} | |
5435 | |
5436 // Load Double - UNaligned | |
5437 instruct loadD_unaligned(regD_low dst, memory mem ) %{ | |
5438 match(Set dst (LoadD_unaligned mem)); | |
5439 ins_cost(MEMORY_REF_COST*2+DEFAULT_COST); | |
5440 size(8); | |
5441 format %{ "LDF $mem ,$dst.hi\t! misaligned double\n" | |
5442 "\tLDF $mem+4,$dst.lo\t!" %} | |
5443 opcode(Assembler::ldf_op3); | |
5444 ins_encode( form3_mem_reg_double_unaligned( mem, dst )); | |
5445 ins_pipe(iload_mem); | |
5446 %} | |
5447 | |
5448 // Load Float | |
5449 instruct loadF(regF dst, memory mem) %{ | |
5450 match(Set dst (LoadF mem)); | |
5451 ins_cost(MEMORY_REF_COST); | |
5452 | |
5453 size(4); | |
5454 format %{ "LDF $mem,$dst" %} | |
5455 opcode(Assembler::ldf_op3); | |
5456 ins_encode( form3_mem_reg( mem, dst ) ); | |
5457 ins_pipe(floadF_mem); | |
5458 %} | |
5459 | |
5460 // Load Constant | |
5461 instruct loadConI( iRegI dst, immI src ) %{ | |
5462 match(Set dst src); | |
5463 ins_cost(DEFAULT_COST * 3/2); | |
5464 format %{ "SET $src,$dst" %} | |
5465 ins_encode( Set32(src, dst) ); | |
5466 ins_pipe(ialu_hi_lo_reg); | |
5467 %} | |
5468 | |
5469 instruct loadConI13( iRegI dst, immI13 src ) %{ | |
5470 match(Set dst src); | |
5471 | |
5472 size(4); | |
5473 format %{ "MOV $src,$dst" %} | |
5474 ins_encode( Set13( src, dst ) ); | |
5475 ins_pipe(ialu_imm); | |
5476 %} | |
5477 | |
5478 instruct loadConP(iRegP dst, immP src) %{ | |
5479 match(Set dst src); | |
5480 ins_cost(DEFAULT_COST * 3/2); | |
5481 format %{ "SET $src,$dst\t!ptr" %} | |
5482 // This rule does not use "expand" unlike loadConI because then | |
5483 // the result type is not known to be an Oop. An ADLC | |
5484 // enhancement will be needed to make that work - not worth it! | |
5485 | |
5486 ins_encode( SetPtr( src, dst ) ); | |
5487 ins_pipe(loadConP); | |
5488 | |
5489 %} | |
5490 | |
5491 instruct loadConP0(iRegP dst, immP0 src) %{ | |
5492 match(Set dst src); | |
5493 | |
5494 size(4); | |
5495 format %{ "CLR $dst\t!ptr" %} | |
5496 ins_encode( SetNull( dst ) ); | |
5497 ins_pipe(ialu_imm); | |
5498 %} | |
5499 | |
5500 instruct loadConP_poll(iRegP dst, immP_poll src) %{ | |
5501 match(Set dst src); | |
5502 ins_cost(DEFAULT_COST); | |
5503 format %{ "SET $src,$dst\t!ptr" %} | |
5504 ins_encode %{ | |
5505 Address polling_page(reg_to_register_object($dst$$reg), (address)os::get_polling_page()); | |
5506 __ sethi(polling_page, false ); | |
5507 %} | |
5508 ins_pipe(loadConP_poll); | |
5509 %} | |
5510 | |
5511 instruct loadConL(iRegL dst, immL src, o7RegL tmp) %{ | |
5512 // %%% maybe this should work like loadConD | |
5513 match(Set dst src); | |
5514 effect(KILL tmp); | |
5515 ins_cost(DEFAULT_COST * 4); | |
5516 format %{ "SET64 $src,$dst KILL $tmp\t! long" %} | |
5517 ins_encode( LdImmL(src, dst, tmp) ); | |
5518 ins_pipe(loadConL); | |
5519 %} | |
5520 | |
5521 instruct loadConL0( iRegL dst, immL0 src ) %{ | |
5522 match(Set dst src); | |
5523 ins_cost(DEFAULT_COST); | |
5524 size(4); | |
5525 format %{ "CLR $dst\t! long" %} | |
5526 ins_encode( Set13( src, dst ) ); | |
5527 ins_pipe(ialu_imm); | |
5528 %} | |
5529 | |
5530 instruct loadConL13( iRegL dst, immL13 src ) %{ | |
5531 match(Set dst src); | |
5532 ins_cost(DEFAULT_COST * 2); | |
5533 | |
5534 size(4); | |
5535 format %{ "MOV $src,$dst\t! long" %} | |
5536 ins_encode( Set13( src, dst ) ); | |
5537 ins_pipe(ialu_imm); | |
5538 %} | |
5539 | |
5540 instruct loadConF(regF dst, immF src, o7RegP tmp) %{ | |
5541 match(Set dst src); | |
5542 effect(KILL tmp); | |
5543 | |
5544 #ifdef _LP64 | |
5545 size(36); | |
5546 #else | |
5547 size(8); | |
5548 #endif | |
5549 | |
5550 format %{ "SETHI hi(&$src),$tmp\t!get float $src from table\n\t" | |
5551 "LDF [$tmp+lo(&$src)],$dst" %} | |
5552 ins_encode( LdImmF(src, dst, tmp) ); | |
5553 ins_pipe(loadConFD); | |
5554 %} | |
5555 | |
5556 instruct loadConD(regD dst, immD src, o7RegP tmp) %{ | |
5557 match(Set dst src); | |
5558 effect(KILL tmp); | |
5559 | |
5560 #ifdef _LP64 | |
5561 size(36); | |
5562 #else | |
5563 size(8); | |
5564 #endif | |
5565 | |
5566 format %{ "SETHI hi(&$src),$tmp\t!get double $src from table\n\t" | |
5567 "LDDF [$tmp+lo(&$src)],$dst" %} | |
5568 ins_encode( LdImmD(src, dst, tmp) ); | |
5569 ins_pipe(loadConFD); | |
5570 %} | |
5571 | |
5572 // Prefetch instructions. | |
5573 // Must be safe to execute with invalid address (cannot fault). | |
5574 | |
5575 instruct prefetchr( memory mem ) %{ | |
5576 match( PrefetchRead mem ); | |
5577 ins_cost(MEMORY_REF_COST); | |
5578 | |
5579 format %{ "PREFETCH $mem,0\t! Prefetch read-many" %} | |
5580 opcode(Assembler::prefetch_op3); | |
5581 ins_encode( form3_mem_prefetch_read( mem ) ); | |
5582 ins_pipe(iload_mem); | |
5583 %} | |
5584 | |
5585 instruct prefetchw( memory mem ) %{ | |
5586 match( PrefetchWrite mem ); | |
5587 ins_cost(MEMORY_REF_COST); | |
5588 | |
5589 format %{ "PREFETCH $mem,2\t! Prefetch write-many (and read)" %} | |
5590 opcode(Assembler::prefetch_op3); | |
5591 ins_encode( form3_mem_prefetch_write( mem ) ); | |
5592 ins_pipe(iload_mem); | |
5593 %} | |
5594 | |
5595 | |
5596 //----------Store Instructions------------------------------------------------- | |
5597 // Store Byte | |
5598 instruct storeB(memory mem, iRegI src) %{ | |
5599 match(Set mem (StoreB mem src)); | |
5600 ins_cost(MEMORY_REF_COST); | |
5601 | |
5602 size(4); | |
5603 format %{ "STB $src,$mem\t! byte" %} | |
5604 opcode(Assembler::stb_op3); | |
5605 ins_encode( form3_mem_reg( mem, src ) ); | |
5606 ins_pipe(istore_mem_reg); | |
5607 %} | |
5608 | |
5609 instruct storeB0(memory mem, immI0 src) %{ | |
5610 match(Set mem (StoreB mem src)); | |
5611 ins_cost(MEMORY_REF_COST); | |
5612 | |
5613 size(4); | |
5614 format %{ "STB $src,$mem\t! byte" %} | |
5615 opcode(Assembler::stb_op3); | |
5616 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5617 ins_pipe(istore_mem_zero); | |
5618 %} | |
5619 | |
5620 instruct storeCM0(memory mem, immI0 src) %{ | |
5621 match(Set mem (StoreCM mem src)); | |
5622 ins_cost(MEMORY_REF_COST); | |
5623 | |
5624 size(4); | |
5625 format %{ "STB $src,$mem\t! CMS card-mark byte 0" %} | |
5626 opcode(Assembler::stb_op3); | |
5627 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5628 ins_pipe(istore_mem_zero); | |
5629 %} | |
5630 | |
5631 // Store Char/Short | |
5632 instruct storeC(memory mem, iRegI src) %{ | |
5633 match(Set mem (StoreC mem src)); | |
5634 ins_cost(MEMORY_REF_COST); | |
5635 | |
5636 size(4); | |
5637 format %{ "STH $src,$mem\t! short" %} | |
5638 opcode(Assembler::sth_op3); | |
5639 ins_encode( form3_mem_reg( mem, src ) ); | |
5640 ins_pipe(istore_mem_reg); | |
5641 %} | |
5642 | |
5643 instruct storeC0(memory mem, immI0 src) %{ | |
5644 match(Set mem (StoreC mem src)); | |
5645 ins_cost(MEMORY_REF_COST); | |
5646 | |
5647 size(4); | |
5648 format %{ "STH $src,$mem\t! short" %} | |
5649 opcode(Assembler::sth_op3); | |
5650 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5651 ins_pipe(istore_mem_zero); | |
5652 %} | |
5653 | |
5654 // Store Integer | |
5655 instruct storeI(memory mem, iRegI src) %{ | |
5656 match(Set mem (StoreI mem src)); | |
5657 ins_cost(MEMORY_REF_COST); | |
5658 | |
5659 size(4); | |
5660 format %{ "STW $src,$mem" %} | |
5661 opcode(Assembler::stw_op3); | |
5662 ins_encode( form3_mem_reg( mem, src ) ); | |
5663 ins_pipe(istore_mem_reg); | |
5664 %} | |
5665 | |
5666 // Store Long | |
5667 instruct storeL(memory mem, iRegL src) %{ | |
5668 match(Set mem (StoreL mem src)); | |
5669 ins_cost(MEMORY_REF_COST); | |
5670 size(4); | |
5671 format %{ "STX $src,$mem\t! long" %} | |
5672 opcode(Assembler::stx_op3); | |
5673 ins_encode( form3_mem_reg( mem, src ) ); | |
5674 ins_pipe(istore_mem_reg); | |
5675 %} | |
5676 | |
5677 instruct storeI0(memory mem, immI0 src) %{ | |
5678 match(Set mem (StoreI mem src)); | |
5679 ins_cost(MEMORY_REF_COST); | |
5680 | |
5681 size(4); | |
5682 format %{ "STW $src,$mem" %} | |
5683 opcode(Assembler::stw_op3); | |
5684 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5685 ins_pipe(istore_mem_zero); | |
5686 %} | |
5687 | |
5688 instruct storeL0(memory mem, immL0 src) %{ | |
5689 match(Set mem (StoreL mem src)); | |
5690 ins_cost(MEMORY_REF_COST); | |
5691 | |
5692 size(4); | |
5693 format %{ "STX $src,$mem" %} | |
5694 opcode(Assembler::stx_op3); | |
5695 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5696 ins_pipe(istore_mem_zero); | |
5697 %} | |
5698 | |
5699 // Store Integer from float register (used after fstoi) | |
5700 instruct storeI_Freg(memory mem, regF src) %{ | |
5701 match(Set mem (StoreI mem src)); | |
5702 ins_cost(MEMORY_REF_COST); | |
5703 | |
5704 size(4); | |
5705 format %{ "STF $src,$mem\t! after fstoi/fdtoi" %} | |
5706 opcode(Assembler::stf_op3); | |
5707 ins_encode( form3_mem_reg( mem, src ) ); | |
5708 ins_pipe(fstoreF_mem_reg); | |
5709 %} | |
5710 | |
5711 // Store Pointer | |
5712 instruct storeP(memory dst, sp_ptr_RegP src) %{ | |
5713 match(Set dst (StoreP dst src)); | |
5714 ins_cost(MEMORY_REF_COST); | |
5715 size(4); | |
5716 | |
5717 #ifndef _LP64 | |
5718 format %{ "STW $src,$dst\t! ptr" %} | |
5719 opcode(Assembler::stw_op3, 0, REGP_OP); | |
5720 #else | |
5721 format %{ "STX $src,$dst\t! ptr" %} | |
5722 opcode(Assembler::stx_op3, 0, REGP_OP); | |
5723 #endif | |
5724 ins_encode( form3_mem_reg( dst, src ) ); | |
5725 ins_pipe(istore_mem_spORreg); | |
5726 %} | |
5727 | |
5728 instruct storeP0(memory dst, immP0 src) %{ | |
5729 match(Set dst (StoreP dst src)); | |
5730 ins_cost(MEMORY_REF_COST); | |
5731 size(4); | |
5732 | |
5733 #ifndef _LP64 | |
5734 format %{ "STW $src,$dst\t! ptr" %} | |
5735 opcode(Assembler::stw_op3, 0, REGP_OP); | |
5736 #else | |
5737 format %{ "STX $src,$dst\t! ptr" %} | |
5738 opcode(Assembler::stx_op3, 0, REGP_OP); | |
5739 #endif | |
5740 ins_encode( form3_mem_reg( dst, R_G0 ) ); | |
5741 ins_pipe(istore_mem_zero); | |
5742 %} | |
5743 | |
5744 // Store Double | |
5745 instruct storeD( memory mem, regD src) %{ | |
5746 match(Set mem (StoreD mem src)); | |
5747 ins_cost(MEMORY_REF_COST); | |
5748 | |
5749 size(4); | |
5750 format %{ "STDF $src,$mem" %} | |
5751 opcode(Assembler::stdf_op3); | |
5752 ins_encode( form3_mem_reg( mem, src ) ); | |
5753 ins_pipe(fstoreD_mem_reg); | |
5754 %} | |
5755 | |
5756 instruct storeD0( memory mem, immD0 src) %{ | |
5757 match(Set mem (StoreD mem src)); | |
5758 ins_cost(MEMORY_REF_COST); | |
5759 | |
5760 size(4); | |
5761 format %{ "STX $src,$mem" %} | |
5762 opcode(Assembler::stx_op3); | |
5763 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5764 ins_pipe(fstoreD_mem_zero); | |
5765 %} | |
5766 | |
5767 // Store Float | |
5768 instruct storeF( memory mem, regF src) %{ | |
5769 match(Set mem (StoreF mem src)); | |
5770 ins_cost(MEMORY_REF_COST); | |
5771 | |
5772 size(4); | |
5773 format %{ "STF $src,$mem" %} | |
5774 opcode(Assembler::stf_op3); | |
5775 ins_encode( form3_mem_reg( mem, src ) ); | |
5776 ins_pipe(fstoreF_mem_reg); | |
5777 %} | |
5778 | |
5779 instruct storeF0( memory mem, immF0 src) %{ | |
5780 match(Set mem (StoreF mem src)); | |
5781 ins_cost(MEMORY_REF_COST); | |
5782 | |
5783 size(4); | |
5784 format %{ "STW $src,$mem\t! storeF0" %} | |
5785 opcode(Assembler::stw_op3); | |
5786 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5787 ins_pipe(fstoreF_mem_zero); | |
5788 %} | |
5789 | |
5790 // Store Aligned Packed Bytes in Double register to memory | |
5791 instruct storeA8B(memory mem, regD src) %{ | |
5792 match(Set mem (Store8B mem src)); | |
5793 ins_cost(MEMORY_REF_COST); | |
5794 size(4); | |
5795 format %{ "STDF $src,$mem\t! packed8B" %} | |
5796 opcode(Assembler::stdf_op3); | |
5797 ins_encode( form3_mem_reg( mem, src ) ); | |
5798 ins_pipe(fstoreD_mem_reg); | |
5799 %} | |
5800 | |
5801 // Store Zero into Aligned Packed Bytes | |
5802 instruct storeA8B0(memory mem, immI0 zero) %{ | |
5803 match(Set mem (Store8B mem zero)); | |
5804 ins_cost(MEMORY_REF_COST); | |
5805 size(4); | |
5806 format %{ "STX $zero,$mem\t! packed8B" %} | |
5807 opcode(Assembler::stx_op3); | |
5808 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5809 ins_pipe(fstoreD_mem_zero); | |
5810 %} | |
5811 | |
5812 // Store Aligned Packed Chars/Shorts in Double register to memory | |
5813 instruct storeA4C(memory mem, regD src) %{ | |
5814 match(Set mem (Store4C mem src)); | |
5815 ins_cost(MEMORY_REF_COST); | |
5816 size(4); | |
5817 format %{ "STDF $src,$mem\t! packed4C" %} | |
5818 opcode(Assembler::stdf_op3); | |
5819 ins_encode( form3_mem_reg( mem, src ) ); | |
5820 ins_pipe(fstoreD_mem_reg); | |
5821 %} | |
5822 | |
5823 // Store Zero into Aligned Packed Chars/Shorts | |
5824 instruct storeA4C0(memory mem, immI0 zero) %{ | |
5825 match(Set mem (Store4C mem (Replicate4C zero))); | |
5826 ins_cost(MEMORY_REF_COST); | |
5827 size(4); | |
5828 format %{ "STX $zero,$mem\t! packed4C" %} | |
5829 opcode(Assembler::stx_op3); | |
5830 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5831 ins_pipe(fstoreD_mem_zero); | |
5832 %} | |
5833 | |
5834 // Store Aligned Packed Ints in Double register to memory | |
5835 instruct storeA2I(memory mem, regD src) %{ | |
5836 match(Set mem (Store2I mem src)); | |
5837 ins_cost(MEMORY_REF_COST); | |
5838 size(4); | |
5839 format %{ "STDF $src,$mem\t! packed2I" %} | |
5840 opcode(Assembler::stdf_op3); | |
5841 ins_encode( form3_mem_reg( mem, src ) ); | |
5842 ins_pipe(fstoreD_mem_reg); | |
5843 %} | |
5844 | |
5845 // Store Zero into Aligned Packed Ints | |
5846 instruct storeA2I0(memory mem, immI0 zero) %{ | |
5847 match(Set mem (Store2I mem zero)); | |
5848 ins_cost(MEMORY_REF_COST); | |
5849 size(4); | |
5850 format %{ "STX $zero,$mem\t! packed2I" %} | |
5851 opcode(Assembler::stx_op3); | |
5852 ins_encode( form3_mem_reg( mem, R_G0 ) ); | |
5853 ins_pipe(fstoreD_mem_zero); | |
5854 %} | |
5855 | |
5856 | |
5857 //----------MemBar Instructions----------------------------------------------- | |
5858 // Memory barrier flavors | |
5859 | |
5860 instruct membar_acquire() %{ | |
5861 match(MemBarAcquire); | |
5862 ins_cost(4*MEMORY_REF_COST); | |
5863 | |
5864 size(0); | |
5865 format %{ "MEMBAR-acquire" %} | |
5866 ins_encode( enc_membar_acquire ); | |
5867 ins_pipe(long_memory_op); | |
5868 %} | |
5869 | |
5870 instruct membar_acquire_lock() %{ | |
5871 match(MemBarAcquire); | |
5872 predicate(Matcher::prior_fast_lock(n)); | |
5873 ins_cost(0); | |
5874 | |
5875 size(0); | |
5876 format %{ "!MEMBAR-acquire (CAS in prior FastLock so empty encoding)" %} | |
5877 ins_encode( ); | |
5878 ins_pipe(empty); | |
5879 %} | |
5880 | |
5881 instruct membar_release() %{ | |
5882 match(MemBarRelease); | |
5883 ins_cost(4*MEMORY_REF_COST); | |
5884 | |
5885 size(0); | |
5886 format %{ "MEMBAR-release" %} | |
5887 ins_encode( enc_membar_release ); | |
5888 ins_pipe(long_memory_op); | |
5889 %} | |
5890 | |
5891 instruct membar_release_lock() %{ | |
5892 match(MemBarRelease); | |
5893 predicate(Matcher::post_fast_unlock(n)); | |
5894 ins_cost(0); | |
5895 | |
5896 size(0); | |
5897 format %{ "!MEMBAR-release (CAS in succeeding FastUnlock so empty encoding)" %} | |
5898 ins_encode( ); | |
5899 ins_pipe(empty); | |
5900 %} | |
5901 | |
5902 instruct membar_volatile() %{ | |
5903 match(MemBarVolatile); | |
5904 ins_cost(4*MEMORY_REF_COST); | |
5905 | |
5906 size(4); | |
5907 format %{ "MEMBAR-volatile" %} | |
5908 ins_encode( enc_membar_volatile ); | |
5909 ins_pipe(long_memory_op); | |
5910 %} | |
5911 | |
5912 instruct unnecessary_membar_volatile() %{ | |
5913 match(MemBarVolatile); | |
5914 predicate(Matcher::post_store_load_barrier(n)); | |
5915 ins_cost(0); | |
5916 | |
5917 size(0); | |
5918 format %{ "!MEMBAR-volatile (unnecessary so empty encoding)" %} | |
5919 ins_encode( ); | |
5920 ins_pipe(empty); | |
5921 %} | |
5922 | |
5923 //----------Register Move Instructions----------------------------------------- | |
5924 instruct roundDouble_nop(regD dst) %{ | |
5925 match(Set dst (RoundDouble dst)); | |
5926 ins_cost(0); | |
5927 // SPARC results are already "rounded" (i.e., normal-format IEEE) | |
5928 ins_encode( ); | |
5929 ins_pipe(empty); | |
5930 %} | |
5931 | |
5932 | |
5933 instruct roundFloat_nop(regF dst) %{ | |
5934 match(Set dst (RoundFloat dst)); | |
5935 ins_cost(0); | |
5936 // SPARC results are already "rounded" (i.e., normal-format IEEE) | |
5937 ins_encode( ); | |
5938 ins_pipe(empty); | |
5939 %} | |
5940 | |
5941 | |
5942 // Cast Index to Pointer for unsafe natives | |
5943 instruct castX2P(iRegX src, iRegP dst) %{ | |
5944 match(Set dst (CastX2P src)); | |
5945 | |
5946 format %{ "MOV $src,$dst\t! IntX->Ptr" %} | |
5947 ins_encode( form3_g0_rs2_rd_move( src, dst ) ); | |
5948 ins_pipe(ialu_reg); | |
5949 %} | |
5950 | |
5951 // Cast Pointer to Index for unsafe natives | |
5952 instruct castP2X(iRegP src, iRegX dst) %{ | |
5953 match(Set dst (CastP2X src)); | |
5954 | |
5955 format %{ "MOV $src,$dst\t! Ptr->IntX" %} | |
5956 ins_encode( form3_g0_rs2_rd_move( src, dst ) ); | |
5957 ins_pipe(ialu_reg); | |
5958 %} | |
5959 | |
5960 instruct stfSSD(stackSlotD stkSlot, regD src) %{ | |
5961 // %%%% TO DO: Tell the coalescer that this kind of node is a copy! | |
5962 match(Set stkSlot src); // chain rule | |
5963 ins_cost(MEMORY_REF_COST); | |
5964 format %{ "STDF $src,$stkSlot\t!stk" %} | |
5965 opcode(Assembler::stdf_op3); | |
5966 ins_encode(form3_mem_reg(stkSlot, src)); | |
5967 ins_pipe(fstoreD_stk_reg); | |
5968 %} | |
5969 | |
5970 instruct ldfSSD(regD dst, stackSlotD stkSlot) %{ | |
5971 // %%%% TO DO: Tell the coalescer that this kind of node is a copy! | |
5972 match(Set dst stkSlot); // chain rule | |
5973 ins_cost(MEMORY_REF_COST); | |
5974 format %{ "LDDF $stkSlot,$dst\t!stk" %} | |
5975 opcode(Assembler::lddf_op3); | |
5976 ins_encode(form3_mem_reg(stkSlot, dst)); | |
5977 ins_pipe(floadD_stk); | |
5978 %} | |
5979 | |
5980 instruct stfSSF(stackSlotF stkSlot, regF src) %{ | |
5981 // %%%% TO DO: Tell the coalescer that this kind of node is a copy! | |
5982 match(Set stkSlot src); // chain rule | |
5983 ins_cost(MEMORY_REF_COST); | |
5984 format %{ "STF $src,$stkSlot\t!stk" %} | |
5985 opcode(Assembler::stf_op3); | |
5986 ins_encode(form3_mem_reg(stkSlot, src)); | |
5987 ins_pipe(fstoreF_stk_reg); | |
5988 %} | |
5989 | |
5990 //----------Conditional Move--------------------------------------------------- | |
5991 // Conditional move | |
5992 instruct cmovIP_reg(cmpOpP cmp, flagsRegP pcc, iRegI dst, iRegI src) %{ | |
5993 match(Set dst (CMoveI (Binary cmp pcc) (Binary dst src))); | |
5994 ins_cost(150); | |
5995 format %{ "MOV$cmp $pcc,$src,$dst" %} | |
5996 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::ptr_cc)) ); | |
5997 ins_pipe(ialu_reg); | |
5998 %} | |
5999 | |
6000 instruct cmovIP_imm(cmpOpP cmp, flagsRegP pcc, iRegI dst, immI11 src) %{ | |
6001 match(Set dst (CMoveI (Binary cmp pcc) (Binary dst src))); | |
6002 ins_cost(140); | |
6003 format %{ "MOV$cmp $pcc,$src,$dst" %} | |
6004 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::ptr_cc)) ); | |
6005 ins_pipe(ialu_imm); | |
6006 %} | |
6007 | |
6008 instruct cmovII_reg(cmpOp cmp, flagsReg icc, iRegI dst, iRegI src) %{ | |
6009 match(Set dst (CMoveI (Binary cmp icc) (Binary dst src))); | |
6010 ins_cost(150); | |
6011 size(4); | |
6012 format %{ "MOV$cmp $icc,$src,$dst" %} | |
6013 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::icc)) ); | |
6014 ins_pipe(ialu_reg); | |
6015 %} | |
6016 | |
6017 instruct cmovII_imm(cmpOp cmp, flagsReg icc, iRegI dst, immI11 src) %{ | |
6018 match(Set dst (CMoveI (Binary cmp icc) (Binary dst src))); | |
6019 ins_cost(140); | |
6020 size(4); | |
6021 format %{ "MOV$cmp $icc,$src,$dst" %} | |
6022 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::icc)) ); | |
6023 ins_pipe(ialu_imm); | |
6024 %} | |
6025 | |
6026 instruct cmovII_U_reg(cmpOp cmp, flagsRegU icc, iRegI dst, iRegI src) %{ | |
6027 match(Set dst (CMoveI (Binary cmp icc) (Binary dst src))); | |
6028 ins_cost(150); | |
6029 size(4); | |
6030 format %{ "MOV$cmp $icc,$src,$dst" %} | |
6031 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::icc)) ); | |
6032 ins_pipe(ialu_reg); | |
6033 %} | |
6034 | |
6035 instruct cmovII_U_imm(cmpOp cmp, flagsRegU icc, iRegI dst, immI11 src) %{ | |
6036 match(Set dst (CMoveI (Binary cmp icc) (Binary dst src))); | |
6037 ins_cost(140); | |
6038 size(4); | |
6039 format %{ "MOV$cmp $icc,$src,$dst" %} | |
6040 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::icc)) ); | |
6041 ins_pipe(ialu_imm); | |
6042 %} | |
6043 | |
6044 instruct cmovIF_reg(cmpOpF cmp, flagsRegF fcc, iRegI dst, iRegI src) %{ | |
6045 match(Set dst (CMoveI (Binary cmp fcc) (Binary dst src))); | |
6046 ins_cost(150); | |
6047 size(4); | |
6048 format %{ "MOV$cmp $fcc,$src,$dst" %} | |
6049 ins_encode( enc_cmov_reg_f(cmp,dst,src, fcc) ); | |
6050 ins_pipe(ialu_reg); | |
6051 %} | |
6052 | |
6053 instruct cmovIF_imm(cmpOpF cmp, flagsRegF fcc, iRegI dst, immI11 src) %{ | |
6054 match(Set dst (CMoveI (Binary cmp fcc) (Binary dst src))); | |
6055 ins_cost(140); | |
6056 size(4); | |
6057 format %{ "MOV$cmp $fcc,$src,$dst" %} | |
6058 ins_encode( enc_cmov_imm_f(cmp,dst,src, fcc) ); | |
6059 ins_pipe(ialu_imm); | |
6060 %} | |
6061 | |
6062 // Conditional move | |
6063 instruct cmovPP_reg(cmpOpP cmp, flagsRegP pcc, iRegP dst, iRegP src) %{ | |
6064 match(Set dst (CMoveP (Binary cmp pcc) (Binary dst src))); | |
6065 ins_cost(150); | |
6066 format %{ "MOV$cmp $pcc,$src,$dst\t! ptr" %} | |
6067 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::ptr_cc)) ); | |
6068 ins_pipe(ialu_reg); | |
6069 %} | |
6070 | |
6071 instruct cmovPP_imm(cmpOpP cmp, flagsRegP pcc, iRegP dst, immP0 src) %{ | |
6072 match(Set dst (CMoveP (Binary cmp pcc) (Binary dst src))); | |
6073 ins_cost(140); | |
6074 format %{ "MOV$cmp $pcc,$src,$dst\t! ptr" %} | |
6075 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::ptr_cc)) ); | |
6076 ins_pipe(ialu_imm); | |
6077 %} | |
6078 | |
6079 instruct cmovPI_reg(cmpOp cmp, flagsReg icc, iRegP dst, iRegP src) %{ | |
6080 match(Set dst (CMoveP (Binary cmp icc) (Binary dst src))); | |
6081 ins_cost(150); | |
6082 | |
6083 size(4); | |
6084 format %{ "MOV$cmp $icc,$src,$dst\t! ptr" %} | |
6085 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::icc)) ); | |
6086 ins_pipe(ialu_reg); | |
6087 %} | |
6088 | |
6089 instruct cmovPI_imm(cmpOp cmp, flagsReg icc, iRegP dst, immP0 src) %{ | |
6090 match(Set dst (CMoveP (Binary cmp icc) (Binary dst src))); | |
6091 ins_cost(140); | |
6092 | |
6093 size(4); | |
6094 format %{ "MOV$cmp $icc,$src,$dst\t! ptr" %} | |
6095 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::icc)) ); | |
6096 ins_pipe(ialu_imm); | |
6097 %} | |
6098 | |
6099 instruct cmovPF_reg(cmpOpF cmp, flagsRegF fcc, iRegP dst, iRegP src) %{ | |
6100 match(Set dst (CMoveP (Binary cmp fcc) (Binary dst src))); | |
6101 ins_cost(150); | |
6102 size(4); | |
6103 format %{ "MOV$cmp $fcc,$src,$dst" %} | |
6104 ins_encode( enc_cmov_reg_f(cmp,dst,src, fcc) ); | |
6105 ins_pipe(ialu_imm); | |
6106 %} | |
6107 | |
6108 instruct cmovPF_imm(cmpOpF cmp, flagsRegF fcc, iRegP dst, immP0 src) %{ | |
6109 match(Set dst (CMoveP (Binary cmp fcc) (Binary dst src))); | |
6110 ins_cost(140); | |
6111 size(4); | |
6112 format %{ "MOV$cmp $fcc,$src,$dst" %} | |
6113 ins_encode( enc_cmov_imm_f(cmp,dst,src, fcc) ); | |
6114 ins_pipe(ialu_imm); | |
6115 %} | |
6116 | |
6117 // Conditional move | |
6118 instruct cmovFP_reg(cmpOpP cmp, flagsRegP pcc, regF dst, regF src) %{ | |
6119 match(Set dst (CMoveF (Binary cmp pcc) (Binary dst src))); | |
6120 ins_cost(150); | |
6121 opcode(0x101); | |
6122 format %{ "FMOVD$cmp $pcc,$src,$dst" %} | |
6123 ins_encode( enc_cmovf_reg(cmp,dst,src, (Assembler::ptr_cc)) ); | |
6124 ins_pipe(int_conditional_float_move); | |
6125 %} | |
6126 | |
6127 instruct cmovFI_reg(cmpOp cmp, flagsReg icc, regF dst, regF src) %{ | |
6128 match(Set dst (CMoveF (Binary cmp icc) (Binary dst src))); | |
6129 ins_cost(150); | |
6130 | |
6131 size(4); | |
6132 format %{ "FMOVS$cmp $icc,$src,$dst" %} | |
6133 opcode(0x101); | |
6134 ins_encode( enc_cmovf_reg(cmp,dst,src, (Assembler::icc)) ); | |
6135 ins_pipe(int_conditional_float_move); | |
6136 %} | |
6137 | |
6138 // Conditional move, | |
6139 instruct cmovFF_reg(cmpOpF cmp, flagsRegF fcc, regF dst, regF src) %{ | |
6140 match(Set dst (CMoveF (Binary cmp fcc) (Binary dst src))); | |
6141 ins_cost(150); | |
6142 size(4); | |
6143 format %{ "FMOVF$cmp $fcc,$src,$dst" %} | |
6144 opcode(0x1); | |
6145 ins_encode( enc_cmovff_reg(cmp,fcc,dst,src) ); | |
6146 ins_pipe(int_conditional_double_move); | |
6147 %} | |
6148 | |
6149 // Conditional move | |
6150 instruct cmovDP_reg(cmpOpP cmp, flagsRegP pcc, regD dst, regD src) %{ | |
6151 match(Set dst (CMoveD (Binary cmp pcc) (Binary dst src))); | |
6152 ins_cost(150); | |
6153 size(4); | |
6154 opcode(0x102); | |
6155 format %{ "FMOVD$cmp $pcc,$src,$dst" %} | |
6156 ins_encode( enc_cmovf_reg(cmp,dst,src, (Assembler::ptr_cc)) ); | |
6157 ins_pipe(int_conditional_double_move); | |
6158 %} | |
6159 | |
6160 instruct cmovDI_reg(cmpOp cmp, flagsReg icc, regD dst, regD src) %{ | |
6161 match(Set dst (CMoveD (Binary cmp icc) (Binary dst src))); | |
6162 ins_cost(150); | |
6163 | |
6164 size(4); | |
6165 format %{ "FMOVD$cmp $icc,$src,$dst" %} | |
6166 opcode(0x102); | |
6167 ins_encode( enc_cmovf_reg(cmp,dst,src, (Assembler::icc)) ); | |
6168 ins_pipe(int_conditional_double_move); | |
6169 %} | |
6170 | |
6171 // Conditional move, | |
6172 instruct cmovDF_reg(cmpOpF cmp, flagsRegF fcc, regD dst, regD src) %{ | |
6173 match(Set dst (CMoveD (Binary cmp fcc) (Binary dst src))); | |
6174 ins_cost(150); | |
6175 size(4); | |
6176 format %{ "FMOVD$cmp $fcc,$src,$dst" %} | |
6177 opcode(0x2); | |
6178 ins_encode( enc_cmovff_reg(cmp,fcc,dst,src) ); | |
6179 ins_pipe(int_conditional_double_move); | |
6180 %} | |
6181 | |
6182 // Conditional move | |
6183 instruct cmovLP_reg(cmpOpP cmp, flagsRegP pcc, iRegL dst, iRegL src) %{ | |
6184 match(Set dst (CMoveL (Binary cmp pcc) (Binary dst src))); | |
6185 ins_cost(150); | |
6186 format %{ "MOV$cmp $pcc,$src,$dst\t! long" %} | |
6187 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::ptr_cc)) ); | |
6188 ins_pipe(ialu_reg); | |
6189 %} | |
6190 | |
6191 instruct cmovLP_imm(cmpOpP cmp, flagsRegP pcc, iRegL dst, immI11 src) %{ | |
6192 match(Set dst (CMoveL (Binary cmp pcc) (Binary dst src))); | |
6193 ins_cost(140); | |
6194 format %{ "MOV$cmp $pcc,$src,$dst\t! long" %} | |
6195 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::ptr_cc)) ); | |
6196 ins_pipe(ialu_imm); | |
6197 %} | |
6198 | |
6199 instruct cmovLI_reg(cmpOp cmp, flagsReg icc, iRegL dst, iRegL src) %{ | |
6200 match(Set dst (CMoveL (Binary cmp icc) (Binary dst src))); | |
6201 ins_cost(150); | |
6202 | |
6203 size(4); | |
6204 format %{ "MOV$cmp $icc,$src,$dst\t! long" %} | |
6205 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::icc)) ); | |
6206 ins_pipe(ialu_reg); | |
6207 %} | |
6208 | |
6209 | |
6210 instruct cmovLF_reg(cmpOpF cmp, flagsRegF fcc, iRegL dst, iRegL src) %{ | |
6211 match(Set dst (CMoveL (Binary cmp fcc) (Binary dst src))); | |
6212 ins_cost(150); | |
6213 | |
6214 size(4); | |
6215 format %{ "MOV$cmp $fcc,$src,$dst\t! long" %} | |
6216 ins_encode( enc_cmov_reg_f(cmp,dst,src, fcc) ); | |
6217 ins_pipe(ialu_reg); | |
6218 %} | |
6219 | |
6220 | |
6221 | |
6222 //----------OS and Locking Instructions---------------------------------------- | |
6223 | |
6224 // This name is KNOWN by the ADLC and cannot be changed. | |
6225 // The ADLC forces a 'TypeRawPtr::BOTTOM' output type | |
6226 // for this guy. | |
6227 instruct tlsLoadP(g2RegP dst) %{ | |
6228 match(Set dst (ThreadLocal)); | |
6229 | |
6230 size(0); | |
6231 ins_cost(0); | |
6232 format %{ "# TLS is in G2" %} | |
6233 ins_encode( /*empty encoding*/ ); | |
6234 ins_pipe(ialu_none); | |
6235 %} | |
6236 | |
6237 instruct checkCastPP( iRegP dst ) %{ | |
6238 match(Set dst (CheckCastPP dst)); | |
6239 | |
6240 size(0); | |
6241 format %{ "# checkcastPP of $dst" %} | |
6242 ins_encode( /*empty encoding*/ ); | |
6243 ins_pipe(empty); | |
6244 %} | |
6245 | |
6246 | |
6247 instruct castPP( iRegP dst ) %{ | |
6248 match(Set dst (CastPP dst)); | |
6249 format %{ "# castPP of $dst" %} | |
6250 ins_encode( /*empty encoding*/ ); | |
6251 ins_pipe(empty); | |
6252 %} | |
6253 | |
6254 instruct castII( iRegI dst ) %{ | |
6255 match(Set dst (CastII dst)); | |
6256 format %{ "# castII of $dst" %} | |
6257 ins_encode( /*empty encoding*/ ); | |
6258 ins_cost(0); | |
6259 ins_pipe(empty); | |
6260 %} | |
6261 | |
6262 //----------Arithmetic Instructions-------------------------------------------- | |
6263 // Addition Instructions | |
6264 // Register Addition | |
6265 instruct addI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
6266 match(Set dst (AddI src1 src2)); | |
6267 | |
6268 size(4); | |
6269 format %{ "ADD $src1,$src2,$dst" %} | |
6270 ins_encode %{ | |
6271 __ add($src1$$Register, $src2$$Register, $dst$$Register); | |
6272 %} | |
6273 ins_pipe(ialu_reg_reg); | |
6274 %} | |
6275 | |
6276 // Immediate Addition | |
6277 instruct addI_reg_imm13(iRegI dst, iRegI src1, immI13 src2) %{ | |
6278 match(Set dst (AddI src1 src2)); | |
6279 | |
6280 size(4); | |
6281 format %{ "ADD $src1,$src2,$dst" %} | |
6282 opcode(Assembler::add_op3, Assembler::arith_op); | |
6283 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
6284 ins_pipe(ialu_reg_imm); | |
6285 %} | |
6286 | |
6287 // Pointer Register Addition | |
6288 instruct addP_reg_reg(iRegP dst, iRegP src1, iRegX src2) %{ | |
6289 match(Set dst (AddP src1 src2)); | |
6290 | |
6291 size(4); | |
6292 format %{ "ADD $src1,$src2,$dst" %} | |
6293 opcode(Assembler::add_op3, Assembler::arith_op); | |
6294 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6295 ins_pipe(ialu_reg_reg); | |
6296 %} | |
6297 | |
6298 // Pointer Immediate Addition | |
6299 instruct addP_reg_imm13(iRegP dst, iRegP src1, immX13 src2) %{ | |
6300 match(Set dst (AddP src1 src2)); | |
6301 | |
6302 size(4); | |
6303 format %{ "ADD $src1,$src2,$dst" %} | |
6304 opcode(Assembler::add_op3, Assembler::arith_op); | |
6305 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
6306 ins_pipe(ialu_reg_imm); | |
6307 %} | |
6308 | |
6309 // Long Addition | |
6310 instruct addL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
6311 match(Set dst (AddL src1 src2)); | |
6312 | |
6313 size(4); | |
6314 format %{ "ADD $src1,$src2,$dst\t! long" %} | |
6315 opcode(Assembler::add_op3, Assembler::arith_op); | |
6316 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6317 ins_pipe(ialu_reg_reg); | |
6318 %} | |
6319 | |
6320 instruct addL_reg_imm13(iRegL dst, iRegL src1, immL13 con) %{ | |
6321 match(Set dst (AddL src1 con)); | |
6322 | |
6323 size(4); | |
6324 format %{ "ADD $src1,$con,$dst" %} | |
6325 opcode(Assembler::add_op3, Assembler::arith_op); | |
6326 ins_encode( form3_rs1_simm13_rd( src1, con, dst ) ); | |
6327 ins_pipe(ialu_reg_imm); | |
6328 %} | |
6329 | |
6330 //----------Conditional_store-------------------------------------------------- | |
6331 // Conditional-store of the updated heap-top. | |
6332 // Used during allocation of the shared heap. | |
6333 // Sets flags (EQ) on success. Implemented with a CASA on Sparc. | |
6334 | |
6335 // LoadP-locked. Same as a regular pointer load when used with a compare-swap | |
6336 instruct loadPLocked(iRegP dst, memory mem) %{ | |
6337 match(Set dst (LoadPLocked mem)); | |
6338 ins_cost(MEMORY_REF_COST); | |
6339 | |
6340 #ifndef _LP64 | |
6341 size(4); | |
6342 format %{ "LDUW $mem,$dst\t! ptr" %} | |
6343 opcode(Assembler::lduw_op3, 0, REGP_OP); | |
6344 #else | |
6345 format %{ "LDX $mem,$dst\t! ptr" %} | |
6346 opcode(Assembler::ldx_op3, 0, REGP_OP); | |
6347 #endif | |
6348 ins_encode( form3_mem_reg( mem, dst ) ); | |
6349 ins_pipe(iload_mem); | |
6350 %} | |
6351 | |
6352 // LoadL-locked. Same as a regular long load when used with a compare-swap | |
6353 instruct loadLLocked(iRegL dst, memory mem) %{ | |
6354 match(Set dst (LoadLLocked mem)); | |
6355 ins_cost(MEMORY_REF_COST); | |
6356 size(4); | |
6357 format %{ "LDX $mem,$dst\t! long" %} | |
6358 opcode(Assembler::ldx_op3); | |
6359 ins_encode( form3_mem_reg( mem, dst ) ); | |
6360 ins_pipe(iload_mem); | |
6361 %} | |
6362 | |
6363 instruct storePConditional( iRegP heap_top_ptr, iRegP oldval, g3RegP newval, flagsRegP pcc ) %{ | |
6364 match(Set pcc (StorePConditional heap_top_ptr (Binary oldval newval))); | |
6365 effect( KILL newval ); | |
6366 format %{ "CASA [$heap_top_ptr],$oldval,R_G3\t! If $oldval==[$heap_top_ptr] Then store R_G3 into [$heap_top_ptr], set R_G3=[$heap_top_ptr] in any case\n\t" | |
6367 "CMP R_G3,$oldval\t\t! See if we made progress" %} | |
6368 ins_encode( enc_cas(heap_top_ptr,oldval,newval) ); | |
6369 ins_pipe( long_memory_op ); | |
6370 %} | |
6371 | |
6372 instruct storeLConditional_bool(iRegP mem_ptr, iRegL oldval, iRegL newval, iRegI res, o7RegI tmp1, flagsReg ccr ) %{ | |
6373 match(Set res (StoreLConditional mem_ptr (Binary oldval newval))); | |
6374 effect( USE mem_ptr, KILL ccr, KILL tmp1); | |
6375 // Marshal the register pairs into V9 64-bit registers, then do the compare-and-swap | |
6376 format %{ | |
6377 "MOV $newval,R_O7\n\t" | |
6378 "CASXA [$mem_ptr],$oldval,R_O7\t! If $oldval==[$mem_ptr] Then store R_O7 into [$mem_ptr], set R_O7=[$mem_ptr] in any case\n\t" | |
6379 "CMP $oldval,R_O7\t\t! See if we made progress\n\t" | |
6380 "MOV 1,$res\n\t" | |
6381 "MOVne xcc,R_G0,$res" | |
6382 %} | |
6383 ins_encode( enc_casx(mem_ptr, oldval, newval), | |
6384 enc_lflags_ne_to_boolean(res) ); | |
6385 ins_pipe( long_memory_op ); | |
6386 %} | |
6387 | |
6388 instruct storeLConditional_flags(iRegP mem_ptr, iRegL oldval, iRegL newval, flagsRegL xcc, o7RegI tmp1, immI0 zero) %{ | |
6389 match(Set xcc (CmpI (StoreLConditional mem_ptr (Binary oldval newval)) zero)); | |
6390 effect( USE mem_ptr, KILL tmp1); | |
6391 // Marshal the register pairs into V9 64-bit registers, then do the compare-and-swap | |
6392 format %{ | |
6393 "MOV $newval,R_O7\n\t" | |
6394 "CASXA [$mem_ptr],$oldval,R_O7\t! If $oldval==[$mem_ptr] Then store R_O7 into [$mem_ptr], set R_O7=[$mem_ptr] in any case\n\t" | |
6395 "CMP $oldval,R_O7\t\t! See if we made progress" | |
6396 %} | |
6397 ins_encode( enc_casx(mem_ptr, oldval, newval)); | |
6398 ins_pipe( long_memory_op ); | |
6399 %} | |
6400 | |
6401 // No flag versions for CompareAndSwap{P,I,L} because matcher can't match them | |
6402 | |
6403 instruct compareAndSwapL_bool(iRegP mem_ptr, iRegL oldval, iRegL newval, iRegI res, o7RegI tmp1, flagsReg ccr ) %{ | |
6404 match(Set res (CompareAndSwapL mem_ptr (Binary oldval newval))); | |
6405 effect( USE mem_ptr, KILL ccr, KILL tmp1); | |
6406 format %{ | |
6407 "MOV $newval,O7\n\t" | |
6408 "CASXA [$mem_ptr],$oldval,O7\t! If $oldval==[$mem_ptr] Then store O7 into [$mem_ptr], set O7=[$mem_ptr] in any case\n\t" | |
6409 "CMP $oldval,O7\t\t! See if we made progress\n\t" | |
6410 "MOV 1,$res\n\t" | |
6411 "MOVne xcc,R_G0,$res" | |
6412 %} | |
6413 ins_encode( enc_casx(mem_ptr, oldval, newval), | |
6414 enc_lflags_ne_to_boolean(res) ); | |
6415 ins_pipe( long_memory_op ); | |
6416 %} | |
6417 | |
6418 | |
6419 instruct compareAndSwapI_bool(iRegP mem_ptr, iRegI oldval, iRegI newval, iRegI res, o7RegI tmp1, flagsReg ccr ) %{ | |
6420 match(Set res (CompareAndSwapI mem_ptr (Binary oldval newval))); | |
6421 effect( USE mem_ptr, KILL ccr, KILL tmp1); | |
6422 format %{ | |
6423 "MOV $newval,O7\n\t" | |
6424 "CASA [$mem_ptr],$oldval,O7\t! If $oldval==[$mem_ptr] Then store O7 into [$mem_ptr], set O7=[$mem_ptr] in any case\n\t" | |
6425 "CMP $oldval,O7\t\t! See if we made progress\n\t" | |
6426 "MOV 1,$res\n\t" | |
6427 "MOVne icc,R_G0,$res" | |
6428 %} | |
6429 ins_encode( enc_casi(mem_ptr, oldval, newval), | |
6430 enc_iflags_ne_to_boolean(res) ); | |
6431 ins_pipe( long_memory_op ); | |
6432 %} | |
6433 | |
6434 instruct compareAndSwapP_bool(iRegP mem_ptr, iRegP oldval, iRegP newval, iRegI res, o7RegI tmp1, flagsReg ccr ) %{ | |
6435 match(Set res (CompareAndSwapP mem_ptr (Binary oldval newval))); | |
6436 effect( USE mem_ptr, KILL ccr, KILL tmp1); | |
6437 #ifdef _LP64 | |
6438 format %{ | |
6439 "MOV $newval,O7\n\t" | |
6440 "CASXA [$mem_ptr],$oldval,O7\t! If $oldval==[$mem_ptr] Then store O7 into [$mem_ptr], set O7=[$mem_ptr] in any case\n\t" | |
6441 "CMP $oldval,O7\t\t! See if we made progress\n\t" | |
6442 "MOV 1,$res\n\t" | |
6443 "MOVne xcc,R_G0,$res" | |
6444 %} | |
6445 ins_encode( enc_casx(mem_ptr, oldval, newval), | |
6446 enc_lflags_ne_to_boolean(res) ); | |
6447 #else | |
6448 format %{ | |
6449 "MOV $newval,O7\n\t" | |
6450 "CASA [$mem_ptr],$oldval,O7\t! If $oldval==[$mem_ptr] Then store O7 into [$mem_ptr], set O7=[$mem_ptr] in any case\n\t" | |
6451 "CMP $oldval,O7\t\t! See if we made progress\n\t" | |
6452 "MOV 1,$res\n\t" | |
6453 "MOVne icc,R_G0,$res" | |
6454 %} | |
6455 ins_encode( enc_casi(mem_ptr, oldval, newval), | |
6456 enc_iflags_ne_to_boolean(res) ); | |
6457 #endif | |
6458 ins_pipe( long_memory_op ); | |
6459 %} | |
6460 | |
6461 //--------------------- | |
6462 // Subtraction Instructions | |
6463 // Register Subtraction | |
6464 instruct subI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
6465 match(Set dst (SubI src1 src2)); | |
6466 | |
6467 size(4); | |
6468 format %{ "SUB $src1,$src2,$dst" %} | |
6469 opcode(Assembler::sub_op3, Assembler::arith_op); | |
6470 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6471 ins_pipe(ialu_reg_reg); | |
6472 %} | |
6473 | |
6474 // Immediate Subtraction | |
6475 instruct subI_reg_imm13(iRegI dst, iRegI src1, immI13 src2) %{ | |
6476 match(Set dst (SubI src1 src2)); | |
6477 | |
6478 size(4); | |
6479 format %{ "SUB $src1,$src2,$dst" %} | |
6480 opcode(Assembler::sub_op3, Assembler::arith_op); | |
6481 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
6482 ins_pipe(ialu_reg_imm); | |
6483 %} | |
6484 | |
6485 instruct subI_zero_reg(iRegI dst, immI0 zero, iRegI src2) %{ | |
6486 match(Set dst (SubI zero src2)); | |
6487 | |
6488 size(4); | |
6489 format %{ "NEG $src2,$dst" %} | |
6490 opcode(Assembler::sub_op3, Assembler::arith_op); | |
6491 ins_encode( form3_rs1_rs2_rd( R_G0, src2, dst ) ); | |
6492 ins_pipe(ialu_zero_reg); | |
6493 %} | |
6494 | |
6495 // Long subtraction | |
6496 instruct subL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
6497 match(Set dst (SubL src1 src2)); | |
6498 | |
6499 size(4); | |
6500 format %{ "SUB $src1,$src2,$dst\t! long" %} | |
6501 opcode(Assembler::sub_op3, Assembler::arith_op); | |
6502 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6503 ins_pipe(ialu_reg_reg); | |
6504 %} | |
6505 | |
6506 // Immediate Subtraction | |
6507 instruct subL_reg_imm13(iRegL dst, iRegL src1, immL13 con) %{ | |
6508 match(Set dst (SubL src1 con)); | |
6509 | |
6510 size(4); | |
6511 format %{ "SUB $src1,$con,$dst\t! long" %} | |
6512 opcode(Assembler::sub_op3, Assembler::arith_op); | |
6513 ins_encode( form3_rs1_simm13_rd( src1, con, dst ) ); | |
6514 ins_pipe(ialu_reg_imm); | |
6515 %} | |
6516 | |
6517 // Long negation | |
6518 instruct negL_reg_reg(iRegL dst, immL0 zero, iRegL src2) %{ | |
6519 match(Set dst (SubL zero src2)); | |
6520 | |
6521 size(4); | |
6522 format %{ "NEG $src2,$dst\t! long" %} | |
6523 opcode(Assembler::sub_op3, Assembler::arith_op); | |
6524 ins_encode( form3_rs1_rs2_rd( R_G0, src2, dst ) ); | |
6525 ins_pipe(ialu_zero_reg); | |
6526 %} | |
6527 | |
6528 // Multiplication Instructions | |
6529 // Integer Multiplication | |
6530 // Register Multiplication | |
6531 instruct mulI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
6532 match(Set dst (MulI src1 src2)); | |
6533 | |
6534 size(4); | |
6535 format %{ "MULX $src1,$src2,$dst" %} | |
6536 opcode(Assembler::mulx_op3, Assembler::arith_op); | |
6537 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6538 ins_pipe(imul_reg_reg); | |
6539 %} | |
6540 | |
6541 // Immediate Multiplication | |
6542 instruct mulI_reg_imm13(iRegI dst, iRegI src1, immI13 src2) %{ | |
6543 match(Set dst (MulI src1 src2)); | |
6544 | |
6545 size(4); | |
6546 format %{ "MULX $src1,$src2,$dst" %} | |
6547 opcode(Assembler::mulx_op3, Assembler::arith_op); | |
6548 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
6549 ins_pipe(imul_reg_imm); | |
6550 %} | |
6551 | |
6552 instruct mulL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
6553 match(Set dst (MulL src1 src2)); | |
6554 ins_cost(DEFAULT_COST * 5); | |
6555 size(4); | |
6556 format %{ "MULX $src1,$src2,$dst\t! long" %} | |
6557 opcode(Assembler::mulx_op3, Assembler::arith_op); | |
6558 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6559 ins_pipe(mulL_reg_reg); | |
6560 %} | |
6561 | |
6562 // Immediate Multiplication | |
6563 instruct mulL_reg_imm13(iRegL dst, iRegL src1, immL13 src2) %{ | |
6564 match(Set dst (MulL src1 src2)); | |
6565 ins_cost(DEFAULT_COST * 5); | |
6566 size(4); | |
6567 format %{ "MULX $src1,$src2,$dst" %} | |
6568 opcode(Assembler::mulx_op3, Assembler::arith_op); | |
6569 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
6570 ins_pipe(mulL_reg_imm); | |
6571 %} | |
6572 | |
6573 // Integer Division | |
6574 // Register Division | |
6575 instruct divI_reg_reg(iRegI dst, iRegIsafe src1, iRegIsafe src2) %{ | |
6576 match(Set dst (DivI src1 src2)); | |
6577 ins_cost((2+71)*DEFAULT_COST); | |
6578 | |
6579 format %{ "SRA $src2,0,$src2\n\t" | |
6580 "SRA $src1,0,$src1\n\t" | |
6581 "SDIVX $src1,$src2,$dst" %} | |
6582 ins_encode( idiv_reg( src1, src2, dst ) ); | |
6583 ins_pipe(sdiv_reg_reg); | |
6584 %} | |
6585 | |
6586 // Immediate Division | |
6587 instruct divI_reg_imm13(iRegI dst, iRegIsafe src1, immI13 src2) %{ | |
6588 match(Set dst (DivI src1 src2)); | |
6589 ins_cost((2+71)*DEFAULT_COST); | |
6590 | |
6591 format %{ "SRA $src1,0,$src1\n\t" | |
6592 "SDIVX $src1,$src2,$dst" %} | |
6593 ins_encode( idiv_imm( src1, src2, dst ) ); | |
6594 ins_pipe(sdiv_reg_imm); | |
6595 %} | |
6596 | |
6597 //----------Div-By-10-Expansion------------------------------------------------ | |
6598 // Extract hi bits of a 32x32->64 bit multiply. | |
6599 // Expand rule only, not matched | |
6600 instruct mul_hi(iRegIsafe dst, iRegIsafe src1, iRegIsafe src2 ) %{ | |
6601 effect( DEF dst, USE src1, USE src2 ); | |
6602 format %{ "MULX $src1,$src2,$dst\t! Used in div-by-10\n\t" | |
6603 "SRLX $dst,#32,$dst\t\t! Extract only hi word of result" %} | |
6604 ins_encode( enc_mul_hi(dst,src1,src2)); | |
6605 ins_pipe(sdiv_reg_reg); | |
6606 %} | |
6607 | |
6608 // Magic constant, reciprical of 10 | |
6609 instruct loadConI_x66666667(iRegIsafe dst) %{ | |
6610 effect( DEF dst ); | |
6611 | |
6612 size(8); | |
6613 format %{ "SET 0x66666667,$dst\t! Used in div-by-10" %} | |
6614 ins_encode( Set32(0x66666667, dst) ); | |
6615 ins_pipe(ialu_hi_lo_reg); | |
6616 %} | |
6617 | |
6618 // Register Shift Right Arithmatic Long by 32-63 | |
6619 instruct sra_31( iRegI dst, iRegI src ) %{ | |
6620 effect( DEF dst, USE src ); | |
6621 format %{ "SRA $src,31,$dst\t! Used in div-by-10" %} | |
6622 ins_encode( form3_rs1_rd_copysign_hi(src,dst) ); | |
6623 ins_pipe(ialu_reg_reg); | |
6624 %} | |
6625 | |
6626 // Arithmetic Shift Right by 8-bit immediate | |
6627 instruct sra_reg_2( iRegI dst, iRegI src ) %{ | |
6628 effect( DEF dst, USE src ); | |
6629 format %{ "SRA $src,2,$dst\t! Used in div-by-10" %} | |
6630 opcode(Assembler::sra_op3, Assembler::arith_op); | |
6631 ins_encode( form3_rs1_simm13_rd( src, 0x2, dst ) ); | |
6632 ins_pipe(ialu_reg_imm); | |
6633 %} | |
6634 | |
6635 // Integer DIV with 10 | |
6636 instruct divI_10( iRegI dst, iRegIsafe src, immI10 div ) %{ | |
6637 match(Set dst (DivI src div)); | |
6638 ins_cost((6+6)*DEFAULT_COST); | |
6639 expand %{ | |
6640 iRegIsafe tmp1; // Killed temps; | |
6641 iRegIsafe tmp2; // Killed temps; | |
6642 iRegI tmp3; // Killed temps; | |
6643 iRegI tmp4; // Killed temps; | |
6644 loadConI_x66666667( tmp1 ); // SET 0x66666667 -> tmp1 | |
6645 mul_hi( tmp2, src, tmp1 ); // MUL hibits(src * tmp1) -> tmp2 | |
6646 sra_31( tmp3, src ); // SRA src,31 -> tmp3 | |
6647 sra_reg_2( tmp4, tmp2 ); // SRA tmp2,2 -> tmp4 | |
6648 subI_reg_reg( dst,tmp4,tmp3); // SUB tmp4 - tmp3 -> dst | |
6649 %} | |
6650 %} | |
6651 | |
6652 // Register Long Division | |
6653 instruct divL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
6654 match(Set dst (DivL src1 src2)); | |
6655 ins_cost(DEFAULT_COST*71); | |
6656 size(4); | |
6657 format %{ "SDIVX $src1,$src2,$dst\t! long" %} | |
6658 opcode(Assembler::sdivx_op3, Assembler::arith_op); | |
6659 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6660 ins_pipe(divL_reg_reg); | |
6661 %} | |
6662 | |
6663 // Register Long Division | |
6664 instruct divL_reg_imm13(iRegL dst, iRegL src1, immL13 src2) %{ | |
6665 match(Set dst (DivL src1 src2)); | |
6666 ins_cost(DEFAULT_COST*71); | |
6667 size(4); | |
6668 format %{ "SDIVX $src1,$src2,$dst\t! long" %} | |
6669 opcode(Assembler::sdivx_op3, Assembler::arith_op); | |
6670 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
6671 ins_pipe(divL_reg_imm); | |
6672 %} | |
6673 | |
6674 // Integer Remainder | |
6675 // Register Remainder | |
6676 instruct modI_reg_reg(iRegI dst, iRegIsafe src1, iRegIsafe src2, o7RegP temp, flagsReg ccr ) %{ | |
6677 match(Set dst (ModI src1 src2)); | |
6678 effect( KILL ccr, KILL temp); | |
6679 | |
6680 format %{ "SREM $src1,$src2,$dst" %} | |
6681 ins_encode( irem_reg(src1, src2, dst, temp) ); | |
6682 ins_pipe(sdiv_reg_reg); | |
6683 %} | |
6684 | |
6685 // Immediate Remainder | |
6686 instruct modI_reg_imm13(iRegI dst, iRegIsafe src1, immI13 src2, o7RegP temp, flagsReg ccr ) %{ | |
6687 match(Set dst (ModI src1 src2)); | |
6688 effect( KILL ccr, KILL temp); | |
6689 | |
6690 format %{ "SREM $src1,$src2,$dst" %} | |
6691 ins_encode( irem_imm(src1, src2, dst, temp) ); | |
6692 ins_pipe(sdiv_reg_imm); | |
6693 %} | |
6694 | |
6695 // Register Long Remainder | |
6696 instruct divL_reg_reg_1(iRegL dst, iRegL src1, iRegL src2) %{ | |
6697 effect(DEF dst, USE src1, USE src2); | |
6698 size(4); | |
6699 format %{ "SDIVX $src1,$src2,$dst\t! long" %} | |
6700 opcode(Assembler::sdivx_op3, Assembler::arith_op); | |
6701 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6702 ins_pipe(divL_reg_reg); | |
6703 %} | |
6704 | |
6705 // Register Long Division | |
6706 instruct divL_reg_imm13_1(iRegL dst, iRegL src1, immL13 src2) %{ | |
6707 effect(DEF dst, USE src1, USE src2); | |
6708 size(4); | |
6709 format %{ "SDIVX $src1,$src2,$dst\t! long" %} | |
6710 opcode(Assembler::sdivx_op3, Assembler::arith_op); | |
6711 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
6712 ins_pipe(divL_reg_imm); | |
6713 %} | |
6714 | |
6715 instruct mulL_reg_reg_1(iRegL dst, iRegL src1, iRegL src2) %{ | |
6716 effect(DEF dst, USE src1, USE src2); | |
6717 size(4); | |
6718 format %{ "MULX $src1,$src2,$dst\t! long" %} | |
6719 opcode(Assembler::mulx_op3, Assembler::arith_op); | |
6720 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6721 ins_pipe(mulL_reg_reg); | |
6722 %} | |
6723 | |
6724 // Immediate Multiplication | |
6725 instruct mulL_reg_imm13_1(iRegL dst, iRegL src1, immL13 src2) %{ | |
6726 effect(DEF dst, USE src1, USE src2); | |
6727 size(4); | |
6728 format %{ "MULX $src1,$src2,$dst" %} | |
6729 opcode(Assembler::mulx_op3, Assembler::arith_op); | |
6730 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
6731 ins_pipe(mulL_reg_imm); | |
6732 %} | |
6733 | |
6734 instruct subL_reg_reg_1(iRegL dst, iRegL src1, iRegL src2) %{ | |
6735 effect(DEF dst, USE src1, USE src2); | |
6736 size(4); | |
6737 format %{ "SUB $src1,$src2,$dst\t! long" %} | |
6738 opcode(Assembler::sub_op3, Assembler::arith_op); | |
6739 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6740 ins_pipe(ialu_reg_reg); | |
6741 %} | |
6742 | |
6743 instruct subL_reg_reg_2(iRegL dst, iRegL src1, iRegL src2) %{ | |
6744 effect(DEF dst, USE src1, USE src2); | |
6745 size(4); | |
6746 format %{ "SUB $src1,$src2,$dst\t! long" %} | |
6747 opcode(Assembler::sub_op3, Assembler::arith_op); | |
6748 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6749 ins_pipe(ialu_reg_reg); | |
6750 %} | |
6751 | |
6752 // Register Long Remainder | |
6753 instruct modL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
6754 match(Set dst (ModL src1 src2)); | |
6755 ins_cost(DEFAULT_COST*(71 + 6 + 1)); | |
6756 expand %{ | |
6757 iRegL tmp1; | |
6758 iRegL tmp2; | |
6759 divL_reg_reg_1(tmp1, src1, src2); | |
6760 mulL_reg_reg_1(tmp2, tmp1, src2); | |
6761 subL_reg_reg_1(dst, src1, tmp2); | |
6762 %} | |
6763 %} | |
6764 | |
6765 // Register Long Remainder | |
6766 instruct modL_reg_imm13(iRegL dst, iRegL src1, immL13 src2) %{ | |
6767 match(Set dst (ModL src1 src2)); | |
6768 ins_cost(DEFAULT_COST*(71 + 6 + 1)); | |
6769 expand %{ | |
6770 iRegL tmp1; | |
6771 iRegL tmp2; | |
6772 divL_reg_imm13_1(tmp1, src1, src2); | |
6773 mulL_reg_imm13_1(tmp2, tmp1, src2); | |
6774 subL_reg_reg_2 (dst, src1, tmp2); | |
6775 %} | |
6776 %} | |
6777 | |
6778 // Integer Shift Instructions | |
6779 // Register Shift Left | |
6780 instruct shlI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
6781 match(Set dst (LShiftI src1 src2)); | |
6782 | |
6783 size(4); | |
6784 format %{ "SLL $src1,$src2,$dst" %} | |
6785 opcode(Assembler::sll_op3, Assembler::arith_op); | |
6786 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6787 ins_pipe(ialu_reg_reg); | |
6788 %} | |
6789 | |
6790 // Register Shift Left Immediate | |
6791 instruct shlI_reg_imm5(iRegI dst, iRegI src1, immU5 src2) %{ | |
6792 match(Set dst (LShiftI src1 src2)); | |
6793 | |
6794 size(4); | |
6795 format %{ "SLL $src1,$src2,$dst" %} | |
6796 opcode(Assembler::sll_op3, Assembler::arith_op); | |
6797 ins_encode( form3_rs1_imm5_rd( src1, src2, dst ) ); | |
6798 ins_pipe(ialu_reg_imm); | |
6799 %} | |
6800 | |
6801 // Register Shift Left | |
6802 instruct shlL_reg_reg(iRegL dst, iRegL src1, iRegI src2) %{ | |
6803 match(Set dst (LShiftL src1 src2)); | |
6804 | |
6805 size(4); | |
6806 format %{ "SLLX $src1,$src2,$dst" %} | |
6807 opcode(Assembler::sllx_op3, Assembler::arith_op); | |
6808 ins_encode( form3_sd_rs1_rs2_rd( src1, src2, dst ) ); | |
6809 ins_pipe(ialu_reg_reg); | |
6810 %} | |
6811 | |
6812 // Register Shift Left Immediate | |
6813 instruct shlL_reg_imm6(iRegL dst, iRegL src1, immU6 src2) %{ | |
6814 match(Set dst (LShiftL src1 src2)); | |
6815 | |
6816 size(4); | |
6817 format %{ "SLLX $src1,$src2,$dst" %} | |
6818 opcode(Assembler::sllx_op3, Assembler::arith_op); | |
6819 ins_encode( form3_sd_rs1_imm6_rd( src1, src2, dst ) ); | |
6820 ins_pipe(ialu_reg_imm); | |
6821 %} | |
6822 | |
6823 // Register Arithmetic Shift Right | |
6824 instruct sarI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
6825 match(Set dst (RShiftI src1 src2)); | |
6826 size(4); | |
6827 format %{ "SRA $src1,$src2,$dst" %} | |
6828 opcode(Assembler::sra_op3, Assembler::arith_op); | |
6829 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6830 ins_pipe(ialu_reg_reg); | |
6831 %} | |
6832 | |
6833 // Register Arithmetic Shift Right Immediate | |
6834 instruct sarI_reg_imm5(iRegI dst, iRegI src1, immU5 src2) %{ | |
6835 match(Set dst (RShiftI src1 src2)); | |
6836 | |
6837 size(4); | |
6838 format %{ "SRA $src1,$src2,$dst" %} | |
6839 opcode(Assembler::sra_op3, Assembler::arith_op); | |
6840 ins_encode( form3_rs1_imm5_rd( src1, src2, dst ) ); | |
6841 ins_pipe(ialu_reg_imm); | |
6842 %} | |
6843 | |
6844 // Register Shift Right Arithmatic Long | |
6845 instruct sarL_reg_reg(iRegL dst, iRegL src1, iRegI src2) %{ | |
6846 match(Set dst (RShiftL src1 src2)); | |
6847 | |
6848 size(4); | |
6849 format %{ "SRAX $src1,$src2,$dst" %} | |
6850 opcode(Assembler::srax_op3, Assembler::arith_op); | |
6851 ins_encode( form3_sd_rs1_rs2_rd( src1, src2, dst ) ); | |
6852 ins_pipe(ialu_reg_reg); | |
6853 %} | |
6854 | |
6855 // Register Shift Left Immediate | |
6856 instruct sarL_reg_imm6(iRegL dst, iRegL src1, immU6 src2) %{ | |
6857 match(Set dst (RShiftL src1 src2)); | |
6858 | |
6859 size(4); | |
6860 format %{ "SRAX $src1,$src2,$dst" %} | |
6861 opcode(Assembler::srax_op3, Assembler::arith_op); | |
6862 ins_encode( form3_sd_rs1_imm6_rd( src1, src2, dst ) ); | |
6863 ins_pipe(ialu_reg_imm); | |
6864 %} | |
6865 | |
6866 // Register Shift Right | |
6867 instruct shrI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
6868 match(Set dst (URShiftI src1 src2)); | |
6869 | |
6870 size(4); | |
6871 format %{ "SRL $src1,$src2,$dst" %} | |
6872 opcode(Assembler::srl_op3, Assembler::arith_op); | |
6873 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
6874 ins_pipe(ialu_reg_reg); | |
6875 %} | |
6876 | |
6877 // Register Shift Right Immediate | |
6878 instruct shrI_reg_imm5(iRegI dst, iRegI src1, immU5 src2) %{ | |
6879 match(Set dst (URShiftI src1 src2)); | |
6880 | |
6881 size(4); | |
6882 format %{ "SRL $src1,$src2,$dst" %} | |
6883 opcode(Assembler::srl_op3, Assembler::arith_op); | |
6884 ins_encode( form3_rs1_imm5_rd( src1, src2, dst ) ); | |
6885 ins_pipe(ialu_reg_imm); | |
6886 %} | |
6887 | |
6888 // Register Shift Right | |
6889 instruct shrL_reg_reg(iRegL dst, iRegL src1, iRegI src2) %{ | |
6890 match(Set dst (URShiftL src1 src2)); | |
6891 | |
6892 size(4); | |
6893 format %{ "SRLX $src1,$src2,$dst" %} | |
6894 opcode(Assembler::srlx_op3, Assembler::arith_op); | |
6895 ins_encode( form3_sd_rs1_rs2_rd( src1, src2, dst ) ); | |
6896 ins_pipe(ialu_reg_reg); | |
6897 %} | |
6898 | |
6899 // Register Shift Right Immediate | |
6900 instruct shrL_reg_imm6(iRegL dst, iRegL src1, immU6 src2) %{ | |
6901 match(Set dst (URShiftL src1 src2)); | |
6902 | |
6903 size(4); | |
6904 format %{ "SRLX $src1,$src2,$dst" %} | |
6905 opcode(Assembler::srlx_op3, Assembler::arith_op); | |
6906 ins_encode( form3_sd_rs1_imm6_rd( src1, src2, dst ) ); | |
6907 ins_pipe(ialu_reg_imm); | |
6908 %} | |
6909 | |
6910 // Register Shift Right Immediate with a CastP2X | |
6911 #ifdef _LP64 | |
6912 instruct shrP_reg_imm6(iRegL dst, iRegP src1, immU6 src2) %{ | |
6913 match(Set dst (URShiftL (CastP2X src1) src2)); | |
6914 size(4); | |
6915 format %{ "SRLX $src1,$src2,$dst\t! Cast ptr $src1 to long and shift" %} | |
6916 opcode(Assembler::srlx_op3, Assembler::arith_op); | |
6917 ins_encode( form3_sd_rs1_imm6_rd( src1, src2, dst ) ); | |
6918 ins_pipe(ialu_reg_imm); | |
6919 %} | |
6920 #else | |
6921 instruct shrP_reg_imm5(iRegI dst, iRegP src1, immU5 src2) %{ | |
6922 match(Set dst (URShiftI (CastP2X src1) src2)); | |
6923 size(4); | |
6924 format %{ "SRL $src1,$src2,$dst\t! Cast ptr $src1 to int and shift" %} | |
6925 opcode(Assembler::srl_op3, Assembler::arith_op); | |
6926 ins_encode( form3_rs1_imm5_rd( src1, src2, dst ) ); | |
6927 ins_pipe(ialu_reg_imm); | |
6928 %} | |
6929 #endif | |
6930 | |
6931 | |
6932 //----------Floating Point Arithmetic Instructions----------------------------- | |
6933 | |
6934 // Add float single precision | |
6935 instruct addF_reg_reg(regF dst, regF src1, regF src2) %{ | |
6936 match(Set dst (AddF src1 src2)); | |
6937 | |
6938 size(4); | |
6939 format %{ "FADDS $src1,$src2,$dst" %} | |
6940 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fadds_opf); | |
6941 ins_encode(form3_opf_rs1F_rs2F_rdF(src1, src2, dst)); | |
6942 ins_pipe(faddF_reg_reg); | |
6943 %} | |
6944 | |
6945 // Add float double precision | |
6946 instruct addD_reg_reg(regD dst, regD src1, regD src2) %{ | |
6947 match(Set dst (AddD src1 src2)); | |
6948 | |
6949 size(4); | |
6950 format %{ "FADDD $src1,$src2,$dst" %} | |
6951 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::faddd_opf); | |
6952 ins_encode(form3_opf_rs1D_rs2D_rdD(src1, src2, dst)); | |
6953 ins_pipe(faddD_reg_reg); | |
6954 %} | |
6955 | |
6956 // Sub float single precision | |
6957 instruct subF_reg_reg(regF dst, regF src1, regF src2) %{ | |
6958 match(Set dst (SubF src1 src2)); | |
6959 | |
6960 size(4); | |
6961 format %{ "FSUBS $src1,$src2,$dst" %} | |
6962 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fsubs_opf); | |
6963 ins_encode(form3_opf_rs1F_rs2F_rdF(src1, src2, dst)); | |
6964 ins_pipe(faddF_reg_reg); | |
6965 %} | |
6966 | |
6967 // Sub float double precision | |
6968 instruct subD_reg_reg(regD dst, regD src1, regD src2) %{ | |
6969 match(Set dst (SubD src1 src2)); | |
6970 | |
6971 size(4); | |
6972 format %{ "FSUBD $src1,$src2,$dst" %} | |
6973 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fsubd_opf); | |
6974 ins_encode(form3_opf_rs1D_rs2D_rdD(src1, src2, dst)); | |
6975 ins_pipe(faddD_reg_reg); | |
6976 %} | |
6977 | |
6978 // Mul float single precision | |
6979 instruct mulF_reg_reg(regF dst, regF src1, regF src2) %{ | |
6980 match(Set dst (MulF src1 src2)); | |
6981 | |
6982 size(4); | |
6983 format %{ "FMULS $src1,$src2,$dst" %} | |
6984 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fmuls_opf); | |
6985 ins_encode(form3_opf_rs1F_rs2F_rdF(src1, src2, dst)); | |
6986 ins_pipe(fmulF_reg_reg); | |
6987 %} | |
6988 | |
6989 // Mul float double precision | |
6990 instruct mulD_reg_reg(regD dst, regD src1, regD src2) %{ | |
6991 match(Set dst (MulD src1 src2)); | |
6992 | |
6993 size(4); | |
6994 format %{ "FMULD $src1,$src2,$dst" %} | |
6995 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fmuld_opf); | |
6996 ins_encode(form3_opf_rs1D_rs2D_rdD(src1, src2, dst)); | |
6997 ins_pipe(fmulD_reg_reg); | |
6998 %} | |
6999 | |
7000 // Div float single precision | |
7001 instruct divF_reg_reg(regF dst, regF src1, regF src2) %{ | |
7002 match(Set dst (DivF src1 src2)); | |
7003 | |
7004 size(4); | |
7005 format %{ "FDIVS $src1,$src2,$dst" %} | |
7006 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fdivs_opf); | |
7007 ins_encode(form3_opf_rs1F_rs2F_rdF(src1, src2, dst)); | |
7008 ins_pipe(fdivF_reg_reg); | |
7009 %} | |
7010 | |
7011 // Div float double precision | |
7012 instruct divD_reg_reg(regD dst, regD src1, regD src2) %{ | |
7013 match(Set dst (DivD src1 src2)); | |
7014 | |
7015 size(4); | |
7016 format %{ "FDIVD $src1,$src2,$dst" %} | |
7017 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fdivd_opf); | |
7018 ins_encode(form3_opf_rs1D_rs2D_rdD(src1, src2, dst)); | |
7019 ins_pipe(fdivD_reg_reg); | |
7020 %} | |
7021 | |
7022 // Absolute float double precision | |
7023 instruct absD_reg(regD dst, regD src) %{ | |
7024 match(Set dst (AbsD src)); | |
7025 | |
7026 format %{ "FABSd $src,$dst" %} | |
7027 ins_encode(fabsd(dst, src)); | |
7028 ins_pipe(faddD_reg); | |
7029 %} | |
7030 | |
7031 // Absolute float single precision | |
7032 instruct absF_reg(regF dst, regF src) %{ | |
7033 match(Set dst (AbsF src)); | |
7034 | |
7035 format %{ "FABSs $src,$dst" %} | |
7036 ins_encode(fabss(dst, src)); | |
7037 ins_pipe(faddF_reg); | |
7038 %} | |
7039 | |
7040 instruct negF_reg(regF dst, regF src) %{ | |
7041 match(Set dst (NegF src)); | |
7042 | |
7043 size(4); | |
7044 format %{ "FNEGs $src,$dst" %} | |
7045 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fnegs_opf); | |
7046 ins_encode(form3_opf_rs2F_rdF(src, dst)); | |
7047 ins_pipe(faddF_reg); | |
7048 %} | |
7049 | |
7050 instruct negD_reg(regD dst, regD src) %{ | |
7051 match(Set dst (NegD src)); | |
7052 | |
7053 format %{ "FNEGd $src,$dst" %} | |
7054 ins_encode(fnegd(dst, src)); | |
7055 ins_pipe(faddD_reg); | |
7056 %} | |
7057 | |
7058 // Sqrt float double precision | |
7059 instruct sqrtF_reg_reg(regF dst, regF src) %{ | |
7060 match(Set dst (ConvD2F (SqrtD (ConvF2D src)))); | |
7061 | |
7062 size(4); | |
7063 format %{ "FSQRTS $src,$dst" %} | |
7064 ins_encode(fsqrts(dst, src)); | |
7065 ins_pipe(fdivF_reg_reg); | |
7066 %} | |
7067 | |
7068 // Sqrt float double precision | |
7069 instruct sqrtD_reg_reg(regD dst, regD src) %{ | |
7070 match(Set dst (SqrtD src)); | |
7071 | |
7072 size(4); | |
7073 format %{ "FSQRTD $src,$dst" %} | |
7074 ins_encode(fsqrtd(dst, src)); | |
7075 ins_pipe(fdivD_reg_reg); | |
7076 %} | |
7077 | |
7078 //----------Logical Instructions----------------------------------------------- | |
7079 // And Instructions | |
7080 // Register And | |
7081 instruct andI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
7082 match(Set dst (AndI src1 src2)); | |
7083 | |
7084 size(4); | |
7085 format %{ "AND $src1,$src2,$dst" %} | |
7086 opcode(Assembler::and_op3, Assembler::arith_op); | |
7087 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
7088 ins_pipe(ialu_reg_reg); | |
7089 %} | |
7090 | |
7091 // Immediate And | |
7092 instruct andI_reg_imm13(iRegI dst, iRegI src1, immI13 src2) %{ | |
7093 match(Set dst (AndI src1 src2)); | |
7094 | |
7095 size(4); | |
7096 format %{ "AND $src1,$src2,$dst" %} | |
7097 opcode(Assembler::and_op3, Assembler::arith_op); | |
7098 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
7099 ins_pipe(ialu_reg_imm); | |
7100 %} | |
7101 | |
7102 // Register And Long | |
7103 instruct andL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
7104 match(Set dst (AndL src1 src2)); | |
7105 | |
7106 ins_cost(DEFAULT_COST); | |
7107 size(4); | |
7108 format %{ "AND $src1,$src2,$dst\t! long" %} | |
7109 opcode(Assembler::and_op3, Assembler::arith_op); | |
7110 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
7111 ins_pipe(ialu_reg_reg); | |
7112 %} | |
7113 | |
7114 instruct andL_reg_imm13(iRegL dst, iRegL src1, immL13 con) %{ | |
7115 match(Set dst (AndL src1 con)); | |
7116 | |
7117 ins_cost(DEFAULT_COST); | |
7118 size(4); | |
7119 format %{ "AND $src1,$con,$dst\t! long" %} | |
7120 opcode(Assembler::and_op3, Assembler::arith_op); | |
7121 ins_encode( form3_rs1_simm13_rd( src1, con, dst ) ); | |
7122 ins_pipe(ialu_reg_imm); | |
7123 %} | |
7124 | |
7125 // Or Instructions | |
7126 // Register Or | |
7127 instruct orI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
7128 match(Set dst (OrI src1 src2)); | |
7129 | |
7130 size(4); | |
7131 format %{ "OR $src1,$src2,$dst" %} | |
7132 opcode(Assembler::or_op3, Assembler::arith_op); | |
7133 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
7134 ins_pipe(ialu_reg_reg); | |
7135 %} | |
7136 | |
7137 // Immediate Or | |
7138 instruct orI_reg_imm13(iRegI dst, iRegI src1, immI13 src2) %{ | |
7139 match(Set dst (OrI src1 src2)); | |
7140 | |
7141 size(4); | |
7142 format %{ "OR $src1,$src2,$dst" %} | |
7143 opcode(Assembler::or_op3, Assembler::arith_op); | |
7144 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
7145 ins_pipe(ialu_reg_imm); | |
7146 %} | |
7147 | |
7148 // Register Or Long | |
7149 instruct orL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
7150 match(Set dst (OrL src1 src2)); | |
7151 | |
7152 ins_cost(DEFAULT_COST); | |
7153 size(4); | |
7154 format %{ "OR $src1,$src2,$dst\t! long" %} | |
7155 opcode(Assembler::or_op3, Assembler::arith_op); | |
7156 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
7157 ins_pipe(ialu_reg_reg); | |
7158 %} | |
7159 | |
7160 instruct orL_reg_imm13(iRegL dst, iRegL src1, immL13 con) %{ | |
7161 match(Set dst (OrL src1 con)); | |
7162 ins_cost(DEFAULT_COST*2); | |
7163 | |
7164 ins_cost(DEFAULT_COST); | |
7165 size(4); | |
7166 format %{ "OR $src1,$con,$dst\t! long" %} | |
7167 opcode(Assembler::or_op3, Assembler::arith_op); | |
7168 ins_encode( form3_rs1_simm13_rd( src1, con, dst ) ); | |
7169 ins_pipe(ialu_reg_imm); | |
7170 %} | |
7171 | |
7172 // Xor Instructions | |
7173 // Register Xor | |
7174 instruct xorI_reg_reg(iRegI dst, iRegI src1, iRegI src2) %{ | |
7175 match(Set dst (XorI src1 src2)); | |
7176 | |
7177 size(4); | |
7178 format %{ "XOR $src1,$src2,$dst" %} | |
7179 opcode(Assembler::xor_op3, Assembler::arith_op); | |
7180 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
7181 ins_pipe(ialu_reg_reg); | |
7182 %} | |
7183 | |
7184 // Immediate Xor | |
7185 instruct xorI_reg_imm13(iRegI dst, iRegI src1, immI13 src2) %{ | |
7186 match(Set dst (XorI src1 src2)); | |
7187 | |
7188 size(4); | |
7189 format %{ "XOR $src1,$src2,$dst" %} | |
7190 opcode(Assembler::xor_op3, Assembler::arith_op); | |
7191 ins_encode( form3_rs1_simm13_rd( src1, src2, dst ) ); | |
7192 ins_pipe(ialu_reg_imm); | |
7193 %} | |
7194 | |
7195 // Register Xor Long | |
7196 instruct xorL_reg_reg(iRegL dst, iRegL src1, iRegL src2) %{ | |
7197 match(Set dst (XorL src1 src2)); | |
7198 | |
7199 ins_cost(DEFAULT_COST); | |
7200 size(4); | |
7201 format %{ "XOR $src1,$src2,$dst\t! long" %} | |
7202 opcode(Assembler::xor_op3, Assembler::arith_op); | |
7203 ins_encode( form3_rs1_rs2_rd( src1, src2, dst ) ); | |
7204 ins_pipe(ialu_reg_reg); | |
7205 %} | |
7206 | |
7207 instruct xorL_reg_imm13(iRegL dst, iRegL src1, immL13 con) %{ | |
7208 match(Set dst (XorL src1 con)); | |
7209 | |
7210 ins_cost(DEFAULT_COST); | |
7211 size(4); | |
7212 format %{ "XOR $src1,$con,$dst\t! long" %} | |
7213 opcode(Assembler::xor_op3, Assembler::arith_op); | |
7214 ins_encode( form3_rs1_simm13_rd( src1, con, dst ) ); | |
7215 ins_pipe(ialu_reg_imm); | |
7216 %} | |
7217 | |
7218 //----------Convert to Boolean------------------------------------------------- | |
7219 // Nice hack for 32-bit tests but doesn't work for | |
7220 // 64-bit pointers. | |
7221 instruct convI2B( iRegI dst, iRegI src, flagsReg ccr ) %{ | |
7222 match(Set dst (Conv2B src)); | |
7223 effect( KILL ccr ); | |
7224 ins_cost(DEFAULT_COST*2); | |
7225 format %{ "CMP R_G0,$src\n\t" | |
7226 "ADDX R_G0,0,$dst" %} | |
7227 ins_encode( enc_to_bool( src, dst ) ); | |
7228 ins_pipe(ialu_reg_ialu); | |
7229 %} | |
7230 | |
7231 #ifndef _LP64 | |
7232 instruct convP2B( iRegI dst, iRegP src, flagsReg ccr ) %{ | |
7233 match(Set dst (Conv2B src)); | |
7234 effect( KILL ccr ); | |
7235 ins_cost(DEFAULT_COST*2); | |
7236 format %{ "CMP R_G0,$src\n\t" | |
7237 "ADDX R_G0,0,$dst" %} | |
7238 ins_encode( enc_to_bool( src, dst ) ); | |
7239 ins_pipe(ialu_reg_ialu); | |
7240 %} | |
7241 #else | |
7242 instruct convP2B( iRegI dst, iRegP src ) %{ | |
7243 match(Set dst (Conv2B src)); | |
7244 ins_cost(DEFAULT_COST*2); | |
7245 format %{ "MOV $src,$dst\n\t" | |
7246 "MOVRNZ $src,1,$dst" %} | |
7247 ins_encode( form3_g0_rs2_rd_move( src, dst ), enc_convP2B( dst, src ) ); | |
7248 ins_pipe(ialu_clr_and_mover); | |
7249 %} | |
7250 #endif | |
7251 | |
7252 instruct cmpLTMask_reg_reg( iRegI dst, iRegI p, iRegI q, flagsReg ccr ) %{ | |
7253 match(Set dst (CmpLTMask p q)); | |
7254 effect( KILL ccr ); | |
7255 ins_cost(DEFAULT_COST*4); | |
7256 format %{ "CMP $p,$q\n\t" | |
7257 "MOV #0,$dst\n\t" | |
7258 "BLT,a .+8\n\t" | |
7259 "MOV #-1,$dst" %} | |
7260 ins_encode( enc_ltmask(p,q,dst) ); | |
7261 ins_pipe(ialu_reg_reg_ialu); | |
7262 %} | |
7263 | |
7264 instruct cadd_cmpLTMask( iRegI p, iRegI q, iRegI y, iRegI tmp, flagsReg ccr ) %{ | |
7265 match(Set p (AddI (AndI (CmpLTMask p q) y) (SubI p q))); | |
7266 effect(KILL ccr, TEMP tmp); | |
7267 ins_cost(DEFAULT_COST*3); | |
7268 | |
7269 format %{ "SUBcc $p,$q,$p\t! p' = p-q\n\t" | |
7270 "ADD $p,$y,$tmp\t! g3=p-q+y\n\t" | |
7271 "MOVl $tmp,$p\t! p' < 0 ? p'+y : p'" %} | |
7272 ins_encode( enc_cadd_cmpLTMask(p, q, y, tmp) ); | |
7273 ins_pipe( cadd_cmpltmask ); | |
7274 %} | |
7275 | |
7276 instruct cadd_cmpLTMask2( iRegI p, iRegI q, iRegI y, iRegI tmp, flagsReg ccr ) %{ | |
7277 match(Set p (AddI (SubI p q) (AndI (CmpLTMask p q) y))); | |
7278 effect( KILL ccr, TEMP tmp); | |
7279 ins_cost(DEFAULT_COST*3); | |
7280 | |
7281 format %{ "SUBcc $p,$q,$p\t! p' = p-q\n\t" | |
7282 "ADD $p,$y,$tmp\t! g3=p-q+y\n\t" | |
7283 "MOVl $tmp,$p\t! p' < 0 ? p'+y : p'" %} | |
7284 ins_encode( enc_cadd_cmpLTMask(p, q, y, tmp) ); | |
7285 ins_pipe( cadd_cmpltmask ); | |
7286 %} | |
7287 | |
7288 //----------Arithmetic Conversion Instructions--------------------------------- | |
7289 // The conversions operations are all Alpha sorted. Please keep it that way! | |
7290 | |
7291 instruct convD2F_reg(regF dst, regD src) %{ | |
7292 match(Set dst (ConvD2F src)); | |
7293 size(4); | |
7294 format %{ "FDTOS $src,$dst" %} | |
7295 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fdtos_opf); | |
7296 ins_encode(form3_opf_rs2D_rdF(src, dst)); | |
7297 ins_pipe(fcvtD2F); | |
7298 %} | |
7299 | |
7300 | |
7301 // Convert a double to an int in a float register. | |
7302 // If the double is a NAN, stuff a zero in instead. | |
7303 instruct convD2I_helper(regF dst, regD src, flagsRegF0 fcc0) %{ | |
7304 effect(DEF dst, USE src, KILL fcc0); | |
7305 format %{ "FCMPd fcc0,$src,$src\t! check for NAN\n\t" | |
7306 "FBO,pt fcc0,skip\t! branch on ordered, predict taken\n\t" | |
7307 "FDTOI $src,$dst\t! convert in delay slot\n\t" | |
7308 "FITOS $dst,$dst\t! change NaN/max-int to valid float\n\t" | |
7309 "FSUBs $dst,$dst,$dst\t! cleared only if nan\n" | |
7310 "skip:" %} | |
7311 ins_encode(form_d2i_helper(src,dst)); | |
7312 ins_pipe(fcvtD2I); | |
7313 %} | |
7314 | |
7315 instruct convD2I_reg(stackSlotI dst, regD src) %{ | |
7316 match(Set dst (ConvD2I src)); | |
7317 ins_cost(DEFAULT_COST*2 + MEMORY_REF_COST*2 + BRANCH_COST); | |
7318 expand %{ | |
7319 regF tmp; | |
7320 convD2I_helper(tmp, src); | |
7321 regF_to_stkI(dst, tmp); | |
7322 %} | |
7323 %} | |
7324 | |
7325 // Convert a double to a long in a double register. | |
7326 // If the double is a NAN, stuff a zero in instead. | |
7327 instruct convD2L_helper(regD dst, regD src, flagsRegF0 fcc0) %{ | |
7328 effect(DEF dst, USE src, KILL fcc0); | |
7329 format %{ "FCMPd fcc0,$src,$src\t! check for NAN\n\t" | |
7330 "FBO,pt fcc0,skip\t! branch on ordered, predict taken\n\t" | |
7331 "FDTOX $src,$dst\t! convert in delay slot\n\t" | |
7332 "FXTOD $dst,$dst\t! change NaN/max-long to valid double\n\t" | |
7333 "FSUBd $dst,$dst,$dst\t! cleared only if nan\n" | |
7334 "skip:" %} | |
7335 ins_encode(form_d2l_helper(src,dst)); | |
7336 ins_pipe(fcvtD2L); | |
7337 %} | |
7338 | |
7339 | |
7340 // Double to Long conversion | |
7341 instruct convD2L_reg(stackSlotL dst, regD src) %{ | |
7342 match(Set dst (ConvD2L src)); | |
7343 ins_cost(DEFAULT_COST*2 + MEMORY_REF_COST*2 + BRANCH_COST); | |
7344 expand %{ | |
7345 regD tmp; | |
7346 convD2L_helper(tmp, src); | |
7347 regD_to_stkL(dst, tmp); | |
7348 %} | |
7349 %} | |
7350 | |
7351 | |
7352 instruct convF2D_reg(regD dst, regF src) %{ | |
7353 match(Set dst (ConvF2D src)); | |
7354 format %{ "FSTOD $src,$dst" %} | |
7355 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fstod_opf); | |
7356 ins_encode(form3_opf_rs2F_rdD(src, dst)); | |
7357 ins_pipe(fcvtF2D); | |
7358 %} | |
7359 | |
7360 | |
7361 instruct convF2I_helper(regF dst, regF src, flagsRegF0 fcc0) %{ | |
7362 effect(DEF dst, USE src, KILL fcc0); | |
7363 format %{ "FCMPs fcc0,$src,$src\t! check for NAN\n\t" | |
7364 "FBO,pt fcc0,skip\t! branch on ordered, predict taken\n\t" | |
7365 "FSTOI $src,$dst\t! convert in delay slot\n\t" | |
7366 "FITOS $dst,$dst\t! change NaN/max-int to valid float\n\t" | |
7367 "FSUBs $dst,$dst,$dst\t! cleared only if nan\n" | |
7368 "skip:" %} | |
7369 ins_encode(form_f2i_helper(src,dst)); | |
7370 ins_pipe(fcvtF2I); | |
7371 %} | |
7372 | |
7373 instruct convF2I_reg(stackSlotI dst, regF src) %{ | |
7374 match(Set dst (ConvF2I src)); | |
7375 ins_cost(DEFAULT_COST*2 + MEMORY_REF_COST*2 + BRANCH_COST); | |
7376 expand %{ | |
7377 regF tmp; | |
7378 convF2I_helper(tmp, src); | |
7379 regF_to_stkI(dst, tmp); | |
7380 %} | |
7381 %} | |
7382 | |
7383 | |
7384 instruct convF2L_helper(regD dst, regF src, flagsRegF0 fcc0) %{ | |
7385 effect(DEF dst, USE src, KILL fcc0); | |
7386 format %{ "FCMPs fcc0,$src,$src\t! check for NAN\n\t" | |
7387 "FBO,pt fcc0,skip\t! branch on ordered, predict taken\n\t" | |
7388 "FSTOX $src,$dst\t! convert in delay slot\n\t" | |
7389 "FXTOD $dst,$dst\t! change NaN/max-long to valid double\n\t" | |
7390 "FSUBd $dst,$dst,$dst\t! cleared only if nan\n" | |
7391 "skip:" %} | |
7392 ins_encode(form_f2l_helper(src,dst)); | |
7393 ins_pipe(fcvtF2L); | |
7394 %} | |
7395 | |
7396 // Float to Long conversion | |
7397 instruct convF2L_reg(stackSlotL dst, regF src) %{ | |
7398 match(Set dst (ConvF2L src)); | |
7399 ins_cost(DEFAULT_COST*2 + MEMORY_REF_COST*2 + BRANCH_COST); | |
7400 expand %{ | |
7401 regD tmp; | |
7402 convF2L_helper(tmp, src); | |
7403 regD_to_stkL(dst, tmp); | |
7404 %} | |
7405 %} | |
7406 | |
7407 | |
7408 instruct convI2D_helper(regD dst, regF tmp) %{ | |
7409 effect(USE tmp, DEF dst); | |
7410 format %{ "FITOD $tmp,$dst" %} | |
7411 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fitod_opf); | |
7412 ins_encode(form3_opf_rs2F_rdD(tmp, dst)); | |
7413 ins_pipe(fcvtI2D); | |
7414 %} | |
7415 | |
7416 instruct convI2D_reg(stackSlotI src, regD dst) %{ | |
7417 match(Set dst (ConvI2D src)); | |
7418 ins_cost(DEFAULT_COST + MEMORY_REF_COST); | |
7419 expand %{ | |
7420 regF tmp; | |
7421 stkI_to_regF( tmp, src); | |
7422 convI2D_helper( dst, tmp); | |
7423 %} | |
7424 %} | |
7425 | |
7426 instruct convI2D_mem( regD_low dst, memory mem ) %{ | |
7427 match(Set dst (ConvI2D (LoadI mem))); | |
7428 ins_cost(DEFAULT_COST + MEMORY_REF_COST); | |
7429 size(8); | |
7430 format %{ "LDF $mem,$dst\n\t" | |
7431 "FITOD $dst,$dst" %} | |
7432 opcode(Assembler::ldf_op3, Assembler::fitod_opf); | |
7433 ins_encode( form3_mem_reg( mem, dst ), form3_convI2F(dst, dst)); | |
7434 ins_pipe(floadF_mem); | |
7435 %} | |
7436 | |
7437 | |
7438 instruct convI2F_helper(regF dst, regF tmp) %{ | |
7439 effect(DEF dst, USE tmp); | |
7440 format %{ "FITOS $tmp,$dst" %} | |
7441 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fitos_opf); | |
7442 ins_encode(form3_opf_rs2F_rdF(tmp, dst)); | |
7443 ins_pipe(fcvtI2F); | |
7444 %} | |
7445 | |
7446 instruct convI2F_reg( regF dst, stackSlotI src ) %{ | |
7447 match(Set dst (ConvI2F src)); | |
7448 ins_cost(DEFAULT_COST + MEMORY_REF_COST); | |
7449 expand %{ | |
7450 regF tmp; | |
7451 stkI_to_regF(tmp,src); | |
7452 convI2F_helper(dst, tmp); | |
7453 %} | |
7454 %} | |
7455 | |
7456 instruct convI2F_mem( regF dst, memory mem ) %{ | |
7457 match(Set dst (ConvI2F (LoadI mem))); | |
7458 ins_cost(DEFAULT_COST + MEMORY_REF_COST); | |
7459 size(8); | |
7460 format %{ "LDF $mem,$dst\n\t" | |
7461 "FITOS $dst,$dst" %} | |
7462 opcode(Assembler::ldf_op3, Assembler::fitos_opf); | |
7463 ins_encode( form3_mem_reg( mem, dst ), form3_convI2F(dst, dst)); | |
7464 ins_pipe(floadF_mem); | |
7465 %} | |
7466 | |
7467 | |
7468 instruct convI2L_reg(iRegL dst, iRegI src) %{ | |
7469 match(Set dst (ConvI2L src)); | |
7470 size(4); | |
7471 format %{ "SRA $src,0,$dst\t! int->long" %} | |
7472 opcode(Assembler::sra_op3, Assembler::arith_op); | |
7473 ins_encode( form3_rs1_rs2_rd( src, R_G0, dst ) ); | |
7474 ins_pipe(ialu_reg_reg); | |
7475 %} | |
7476 | |
7477 // Zero-extend convert int to long | |
7478 instruct convI2L_reg_zex(iRegL dst, iRegI src, immL_32bits mask ) %{ | |
7479 match(Set dst (AndL (ConvI2L src) mask) ); | |
7480 size(4); | |
7481 format %{ "SRL $src,0,$dst\t! zero-extend int to long" %} | |
7482 opcode(Assembler::srl_op3, Assembler::arith_op); | |
7483 ins_encode( form3_rs1_rs2_rd( src, R_G0, dst ) ); | |
7484 ins_pipe(ialu_reg_reg); | |
7485 %} | |
7486 | |
7487 // Zero-extend long | |
7488 instruct zerox_long(iRegL dst, iRegL src, immL_32bits mask ) %{ | |
7489 match(Set dst (AndL src mask) ); | |
7490 size(4); | |
7491 format %{ "SRL $src,0,$dst\t! zero-extend long" %} | |
7492 opcode(Assembler::srl_op3, Assembler::arith_op); | |
7493 ins_encode( form3_rs1_rs2_rd( src, R_G0, dst ) ); | |
7494 ins_pipe(ialu_reg_reg); | |
7495 %} | |
7496 | |
7497 instruct MoveF2I_stack_reg(iRegI dst, stackSlotF src) %{ | |
7498 match(Set dst (MoveF2I src)); | |
7499 effect(DEF dst, USE src); | |
7500 ins_cost(MEMORY_REF_COST); | |
7501 | |
7502 size(4); | |
7503 format %{ "LDUW $src,$dst\t! MoveF2I" %} | |
7504 opcode(Assembler::lduw_op3); | |
7505 ins_encode( form3_mem_reg( src, dst ) ); | |
7506 ins_pipe(iload_mem); | |
7507 %} | |
7508 | |
7509 instruct MoveI2F_stack_reg(regF dst, stackSlotI src) %{ | |
7510 match(Set dst (MoveI2F src)); | |
7511 effect(DEF dst, USE src); | |
7512 ins_cost(MEMORY_REF_COST); | |
7513 | |
7514 size(4); | |
7515 format %{ "LDF $src,$dst\t! MoveI2F" %} | |
7516 opcode(Assembler::ldf_op3); | |
7517 ins_encode(form3_mem_reg(src, dst)); | |
7518 ins_pipe(floadF_stk); | |
7519 %} | |
7520 | |
7521 instruct MoveD2L_stack_reg(iRegL dst, stackSlotD src) %{ | |
7522 match(Set dst (MoveD2L src)); | |
7523 effect(DEF dst, USE src); | |
7524 ins_cost(MEMORY_REF_COST); | |
7525 | |
7526 size(4); | |
7527 format %{ "LDX $src,$dst\t! MoveD2L" %} | |
7528 opcode(Assembler::ldx_op3); | |
7529 ins_encode( form3_mem_reg( src, dst ) ); | |
7530 ins_pipe(iload_mem); | |
7531 %} | |
7532 | |
7533 instruct MoveL2D_stack_reg(regD dst, stackSlotL src) %{ | |
7534 match(Set dst (MoveL2D src)); | |
7535 effect(DEF dst, USE src); | |
7536 ins_cost(MEMORY_REF_COST); | |
7537 | |
7538 size(4); | |
7539 format %{ "LDDF $src,$dst\t! MoveL2D" %} | |
7540 opcode(Assembler::lddf_op3); | |
7541 ins_encode(form3_mem_reg(src, dst)); | |
7542 ins_pipe(floadD_stk); | |
7543 %} | |
7544 | |
7545 instruct MoveF2I_reg_stack(stackSlotI dst, regF src) %{ | |
7546 match(Set dst (MoveF2I src)); | |
7547 effect(DEF dst, USE src); | |
7548 ins_cost(MEMORY_REF_COST); | |
7549 | |
7550 size(4); | |
7551 format %{ "STF $src,$dst\t!MoveF2I" %} | |
7552 opcode(Assembler::stf_op3); | |
7553 ins_encode(form3_mem_reg(dst, src)); | |
7554 ins_pipe(fstoreF_stk_reg); | |
7555 %} | |
7556 | |
7557 instruct MoveI2F_reg_stack(stackSlotF dst, iRegI src) %{ | |
7558 match(Set dst (MoveI2F src)); | |
7559 effect(DEF dst, USE src); | |
7560 ins_cost(MEMORY_REF_COST); | |
7561 | |
7562 size(4); | |
7563 format %{ "STW $src,$dst\t!MoveI2F" %} | |
7564 opcode(Assembler::stw_op3); | |
7565 ins_encode( form3_mem_reg( dst, src ) ); | |
7566 ins_pipe(istore_mem_reg); | |
7567 %} | |
7568 | |
7569 instruct MoveD2L_reg_stack(stackSlotL dst, regD src) %{ | |
7570 match(Set dst (MoveD2L src)); | |
7571 effect(DEF dst, USE src); | |
7572 ins_cost(MEMORY_REF_COST); | |
7573 | |
7574 size(4); | |
7575 format %{ "STDF $src,$dst\t!MoveD2L" %} | |
7576 opcode(Assembler::stdf_op3); | |
7577 ins_encode(form3_mem_reg(dst, src)); | |
7578 ins_pipe(fstoreD_stk_reg); | |
7579 %} | |
7580 | |
7581 instruct MoveL2D_reg_stack(stackSlotD dst, iRegL src) %{ | |
7582 match(Set dst (MoveL2D src)); | |
7583 effect(DEF dst, USE src); | |
7584 ins_cost(MEMORY_REF_COST); | |
7585 | |
7586 size(4); | |
7587 format %{ "STX $src,$dst\t!MoveL2D" %} | |
7588 opcode(Assembler::stx_op3); | |
7589 ins_encode( form3_mem_reg( dst, src ) ); | |
7590 ins_pipe(istore_mem_reg); | |
7591 %} | |
7592 | |
7593 | |
7594 //----------- | |
7595 // Long to Double conversion using V8 opcodes. | |
7596 // Still useful because cheetah traps and becomes | |
7597 // amazingly slow for some common numbers. | |
7598 | |
7599 // Magic constant, 0x43300000 | |
7600 instruct loadConI_x43300000(iRegI dst) %{ | |
7601 effect(DEF dst); | |
7602 size(4); | |
7603 format %{ "SETHI HI(0x43300000),$dst\t! 2^52" %} | |
7604 ins_encode(SetHi22(0x43300000, dst)); | |
7605 ins_pipe(ialu_none); | |
7606 %} | |
7607 | |
7608 // Magic constant, 0x41f00000 | |
7609 instruct loadConI_x41f00000(iRegI dst) %{ | |
7610 effect(DEF dst); | |
7611 size(4); | |
7612 format %{ "SETHI HI(0x41f00000),$dst\t! 2^32" %} | |
7613 ins_encode(SetHi22(0x41f00000, dst)); | |
7614 ins_pipe(ialu_none); | |
7615 %} | |
7616 | |
7617 // Construct a double from two float halves | |
7618 instruct regDHi_regDLo_to_regD(regD_low dst, regD_low src1, regD_low src2) %{ | |
7619 effect(DEF dst, USE src1, USE src2); | |
7620 size(8); | |
7621 format %{ "FMOVS $src1.hi,$dst.hi\n\t" | |
7622 "FMOVS $src2.lo,$dst.lo" %} | |
7623 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fmovs_opf); | |
7624 ins_encode(form3_opf_rs2D_hi_rdD_hi(src1, dst), form3_opf_rs2D_lo_rdD_lo(src2, dst)); | |
7625 ins_pipe(faddD_reg_reg); | |
7626 %} | |
7627 | |
7628 // Convert integer in high half of a double register (in the lower half of | |
7629 // the double register file) to double | |
7630 instruct convI2D_regDHi_regD(regD dst, regD_low src) %{ | |
7631 effect(DEF dst, USE src); | |
7632 size(4); | |
7633 format %{ "FITOD $src,$dst" %} | |
7634 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fitod_opf); | |
7635 ins_encode(form3_opf_rs2D_rdD(src, dst)); | |
7636 ins_pipe(fcvtLHi2D); | |
7637 %} | |
7638 | |
7639 // Add float double precision | |
7640 instruct addD_regD_regD(regD dst, regD src1, regD src2) %{ | |
7641 effect(DEF dst, USE src1, USE src2); | |
7642 size(4); | |
7643 format %{ "FADDD $src1,$src2,$dst" %} | |
7644 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::faddd_opf); | |
7645 ins_encode(form3_opf_rs1D_rs2D_rdD(src1, src2, dst)); | |
7646 ins_pipe(faddD_reg_reg); | |
7647 %} | |
7648 | |
7649 // Sub float double precision | |
7650 instruct subD_regD_regD(regD dst, regD src1, regD src2) %{ | |
7651 effect(DEF dst, USE src1, USE src2); | |
7652 size(4); | |
7653 format %{ "FSUBD $src1,$src2,$dst" %} | |
7654 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fsubd_opf); | |
7655 ins_encode(form3_opf_rs1D_rs2D_rdD(src1, src2, dst)); | |
7656 ins_pipe(faddD_reg_reg); | |
7657 %} | |
7658 | |
7659 // Mul float double precision | |
7660 instruct mulD_regD_regD(regD dst, regD src1, regD src2) %{ | |
7661 effect(DEF dst, USE src1, USE src2); | |
7662 size(4); | |
7663 format %{ "FMULD $src1,$src2,$dst" %} | |
7664 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fmuld_opf); | |
7665 ins_encode(form3_opf_rs1D_rs2D_rdD(src1, src2, dst)); | |
7666 ins_pipe(fmulD_reg_reg); | |
7667 %} | |
7668 | |
7669 instruct convL2D_reg_slow_fxtof(regD dst, stackSlotL src) %{ | |
7670 match(Set dst (ConvL2D src)); | |
7671 ins_cost(DEFAULT_COST*8 + MEMORY_REF_COST*6); | |
7672 | |
7673 expand %{ | |
7674 regD_low tmpsrc; | |
7675 iRegI ix43300000; | |
7676 iRegI ix41f00000; | |
7677 stackSlotL lx43300000; | |
7678 stackSlotL lx41f00000; | |
7679 regD_low dx43300000; | |
7680 regD dx41f00000; | |
7681 regD tmp1; | |
7682 regD_low tmp2; | |
7683 regD tmp3; | |
7684 regD tmp4; | |
7685 | |
7686 stkL_to_regD(tmpsrc, src); | |
7687 | |
7688 loadConI_x43300000(ix43300000); | |
7689 loadConI_x41f00000(ix41f00000); | |
7690 regI_to_stkLHi(lx43300000, ix43300000); | |
7691 regI_to_stkLHi(lx41f00000, ix41f00000); | |
7692 stkL_to_regD(dx43300000, lx43300000); | |
7693 stkL_to_regD(dx41f00000, lx41f00000); | |
7694 | |
7695 convI2D_regDHi_regD(tmp1, tmpsrc); | |
7696 regDHi_regDLo_to_regD(tmp2, dx43300000, tmpsrc); | |
7697 subD_regD_regD(tmp3, tmp2, dx43300000); | |
7698 mulD_regD_regD(tmp4, tmp1, dx41f00000); | |
7699 addD_regD_regD(dst, tmp3, tmp4); | |
7700 %} | |
7701 %} | |
7702 | |
7703 // Long to Double conversion using fast fxtof | |
7704 instruct convL2D_helper(regD dst, regD tmp) %{ | |
7705 effect(DEF dst, USE tmp); | |
7706 size(4); | |
7707 format %{ "FXTOD $tmp,$dst" %} | |
7708 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fxtod_opf); | |
7709 ins_encode(form3_opf_rs2D_rdD(tmp, dst)); | |
7710 ins_pipe(fcvtL2D); | |
7711 %} | |
7712 | |
7713 instruct convL2D_reg_fast_fxtof(regD dst, stackSlotL src) %{ | |
7714 predicate(VM_Version::has_fast_fxtof()); | |
7715 match(Set dst (ConvL2D src)); | |
7716 ins_cost(DEFAULT_COST + 3 * MEMORY_REF_COST); | |
7717 expand %{ | |
7718 regD tmp; | |
7719 stkL_to_regD(tmp, src); | |
7720 convL2D_helper(dst, tmp); | |
7721 %} | |
7722 %} | |
7723 | |
7724 //----------- | |
7725 // Long to Float conversion using V8 opcodes. | |
7726 // Still useful because cheetah traps and becomes | |
7727 // amazingly slow for some common numbers. | |
7728 | |
7729 // Long to Float conversion using fast fxtof | |
7730 instruct convL2F_helper(regF dst, regD tmp) %{ | |
7731 effect(DEF dst, USE tmp); | |
7732 size(4); | |
7733 format %{ "FXTOS $tmp,$dst" %} | |
7734 opcode(Assembler::fpop1_op3, Assembler::arith_op, Assembler::fxtos_opf); | |
7735 ins_encode(form3_opf_rs2D_rdF(tmp, dst)); | |
7736 ins_pipe(fcvtL2F); | |
7737 %} | |
7738 | |
7739 instruct convL2F_reg_fast_fxtof(regF dst, stackSlotL src) %{ | |
7740 match(Set dst (ConvL2F src)); | |
7741 ins_cost(DEFAULT_COST + MEMORY_REF_COST); | |
7742 expand %{ | |
7743 regD tmp; | |
7744 stkL_to_regD(tmp, src); | |
7745 convL2F_helper(dst, tmp); | |
7746 %} | |
7747 %} | |
7748 //----------- | |
7749 | |
7750 instruct convL2I_reg(iRegI dst, iRegL src) %{ | |
7751 match(Set dst (ConvL2I src)); | |
7752 #ifndef _LP64 | |
7753 format %{ "MOV $src.lo,$dst\t! long->int" %} | |
7754 ins_encode( form3_g0_rs2_rd_move_lo2( src, dst ) ); | |
7755 ins_pipe(ialu_move_reg_I_to_L); | |
7756 #else | |
7757 size(4); | |
7758 format %{ "SRA $src,R_G0,$dst\t! long->int" %} | |
7759 ins_encode( form3_rs1_rd_signextend_lo1( src, dst ) ); | |
7760 ins_pipe(ialu_reg); | |
7761 #endif | |
7762 %} | |
7763 | |
7764 // Register Shift Right Immediate | |
7765 instruct shrL_reg_imm6_L2I(iRegI dst, iRegL src, immI_32_63 cnt) %{ | |
7766 match(Set dst (ConvL2I (RShiftL src cnt))); | |
7767 | |
7768 size(4); | |
7769 format %{ "SRAX $src,$cnt,$dst" %} | |
7770 opcode(Assembler::srax_op3, Assembler::arith_op); | |
7771 ins_encode( form3_sd_rs1_imm6_rd( src, cnt, dst ) ); | |
7772 ins_pipe(ialu_reg_imm); | |
7773 %} | |
7774 | |
7775 // Replicate scalar to packed byte values in Double register | |
7776 instruct Repl8B_reg_helper(iRegL dst, iRegI src) %{ | |
7777 effect(DEF dst, USE src); | |
7778 format %{ "SLLX $src,56,$dst\n\t" | |
7779 "SRLX $dst, 8,O7\n\t" | |
7780 "OR $dst,O7,$dst\n\t" | |
7781 "SRLX $dst,16,O7\n\t" | |
7782 "OR $dst,O7,$dst\n\t" | |
7783 "SRLX $dst,32,O7\n\t" | |
7784 "OR $dst,O7,$dst\t! replicate8B" %} | |
7785 ins_encode( enc_repl8b(src, dst)); | |
7786 ins_pipe(ialu_reg); | |
7787 %} | |
7788 | |
7789 // Replicate scalar to packed byte values in Double register | |
7790 instruct Repl8B_reg(stackSlotD dst, iRegI src) %{ | |
7791 match(Set dst (Replicate8B src)); | |
7792 expand %{ | |
7793 iRegL tmp; | |
7794 Repl8B_reg_helper(tmp, src); | |
7795 regL_to_stkD(dst, tmp); | |
7796 %} | |
7797 %} | |
7798 | |
7799 // Replicate scalar constant to packed byte values in Double register | |
7800 instruct Repl8B_immI(regD dst, immI13 src, o7RegP tmp) %{ | |
7801 match(Set dst (Replicate8B src)); | |
7802 #ifdef _LP64 | |
7803 size(36); | |
7804 #else | |
7805 size(8); | |
7806 #endif | |
7807 format %{ "SETHI hi(&Repl8($src)),$tmp\t!get Repl8B($src) from table\n\t" | |
7808 "LDDF [$tmp+lo(&Repl8($src))],$dst" %} | |
7809 ins_encode( LdReplImmI(src, dst, tmp, (8), (1)) ); | |
7810 ins_pipe(loadConFD); | |
7811 %} | |
7812 | |
7813 // Replicate scalar to packed char values into stack slot | |
7814 instruct Repl4C_reg_helper(iRegL dst, iRegI src) %{ | |
7815 effect(DEF dst, USE src); | |
7816 format %{ "SLLX $src,48,$dst\n\t" | |
7817 "SRLX $dst,16,O7\n\t" | |
7818 "OR $dst,O7,$dst\n\t" | |
7819 "SRLX $dst,32,O7\n\t" | |
7820 "OR $dst,O7,$dst\t! replicate4C" %} | |
7821 ins_encode( enc_repl4s(src, dst) ); | |
7822 ins_pipe(ialu_reg); | |
7823 %} | |
7824 | |
7825 // Replicate scalar to packed char values into stack slot | |
7826 instruct Repl4C_reg(stackSlotD dst, iRegI src) %{ | |
7827 match(Set dst (Replicate4C src)); | |
7828 expand %{ | |
7829 iRegL tmp; | |
7830 Repl4C_reg_helper(tmp, src); | |
7831 regL_to_stkD(dst, tmp); | |
7832 %} | |
7833 %} | |
7834 | |
7835 // Replicate scalar constant to packed char values in Double register | |
7836 instruct Repl4C_immI(regD dst, immI src, o7RegP tmp) %{ | |
7837 match(Set dst (Replicate4C src)); | |
7838 #ifdef _LP64 | |
7839 size(36); | |
7840 #else | |
7841 size(8); | |
7842 #endif | |
7843 format %{ "SETHI hi(&Repl4($src)),$tmp\t!get Repl4C($src) from table\n\t" | |
7844 "LDDF [$tmp+lo(&Repl4($src))],$dst" %} | |
7845 ins_encode( LdReplImmI(src, dst, tmp, (4), (2)) ); | |
7846 ins_pipe(loadConFD); | |
7847 %} | |
7848 | |
7849 // Replicate scalar to packed short values into stack slot | |
7850 instruct Repl4S_reg_helper(iRegL dst, iRegI src) %{ | |
7851 effect(DEF dst, USE src); | |
7852 format %{ "SLLX $src,48,$dst\n\t" | |
7853 "SRLX $dst,16,O7\n\t" | |
7854 "OR $dst,O7,$dst\n\t" | |
7855 "SRLX $dst,32,O7\n\t" | |
7856 "OR $dst,O7,$dst\t! replicate4S" %} | |
7857 ins_encode( enc_repl4s(src, dst) ); | |
7858 ins_pipe(ialu_reg); | |
7859 %} | |
7860 | |
7861 // Replicate scalar to packed short values into stack slot | |
7862 instruct Repl4S_reg(stackSlotD dst, iRegI src) %{ | |
7863 match(Set dst (Replicate4S src)); | |
7864 expand %{ | |
7865 iRegL tmp; | |
7866 Repl4S_reg_helper(tmp, src); | |
7867 regL_to_stkD(dst, tmp); | |
7868 %} | |
7869 %} | |
7870 | |
7871 // Replicate scalar constant to packed short values in Double register | |
7872 instruct Repl4S_immI(regD dst, immI src, o7RegP tmp) %{ | |
7873 match(Set dst (Replicate4S src)); | |
7874 #ifdef _LP64 | |
7875 size(36); | |
7876 #else | |
7877 size(8); | |
7878 #endif | |
7879 format %{ "SETHI hi(&Repl4($src)),$tmp\t!get Repl4S($src) from table\n\t" | |
7880 "LDDF [$tmp+lo(&Repl4($src))],$dst" %} | |
7881 ins_encode( LdReplImmI(src, dst, tmp, (4), (2)) ); | |
7882 ins_pipe(loadConFD); | |
7883 %} | |
7884 | |
7885 // Replicate scalar to packed int values in Double register | |
7886 instruct Repl2I_reg_helper(iRegL dst, iRegI src) %{ | |
7887 effect(DEF dst, USE src); | |
7888 format %{ "SLLX $src,32,$dst\n\t" | |
7889 "SRLX $dst,32,O7\n\t" | |
7890 "OR $dst,O7,$dst\t! replicate2I" %} | |
7891 ins_encode( enc_repl2i(src, dst)); | |
7892 ins_pipe(ialu_reg); | |
7893 %} | |
7894 | |
7895 // Replicate scalar to packed int values in Double register | |
7896 instruct Repl2I_reg(stackSlotD dst, iRegI src) %{ | |
7897 match(Set dst (Replicate2I src)); | |
7898 expand %{ | |
7899 iRegL tmp; | |
7900 Repl2I_reg_helper(tmp, src); | |
7901 regL_to_stkD(dst, tmp); | |
7902 %} | |
7903 %} | |
7904 | |
7905 // Replicate scalar zero constant to packed int values in Double register | |
7906 instruct Repl2I_immI(regD dst, immI src, o7RegP tmp) %{ | |
7907 match(Set dst (Replicate2I src)); | |
7908 #ifdef _LP64 | |
7909 size(36); | |
7910 #else | |
7911 size(8); | |
7912 #endif | |
7913 format %{ "SETHI hi(&Repl2($src)),$tmp\t!get Repl2I($src) from table\n\t" | |
7914 "LDDF [$tmp+lo(&Repl2($src))],$dst" %} | |
7915 ins_encode( LdReplImmI(src, dst, tmp, (2), (4)) ); | |
7916 ins_pipe(loadConFD); | |
7917 %} | |
7918 | |
7919 //----------Control Flow Instructions------------------------------------------ | |
7920 // Compare Instructions | |
7921 // Compare Integers | |
7922 instruct compI_iReg(flagsReg icc, iRegI op1, iRegI op2) %{ | |
7923 match(Set icc (CmpI op1 op2)); | |
7924 effect( DEF icc, USE op1, USE op2 ); | |
7925 | |
7926 size(4); | |
7927 format %{ "CMP $op1,$op2" %} | |
7928 opcode(Assembler::subcc_op3, Assembler::arith_op); | |
7929 ins_encode( form3_rs1_rs2_rd( op1, op2, R_G0 ) ); | |
7930 ins_pipe(ialu_cconly_reg_reg); | |
7931 %} | |
7932 | |
7933 instruct compU_iReg(flagsRegU icc, iRegI op1, iRegI op2) %{ | |
7934 match(Set icc (CmpU op1 op2)); | |
7935 | |
7936 size(4); | |
7937 format %{ "CMP $op1,$op2\t! unsigned" %} | |
7938 opcode(Assembler::subcc_op3, Assembler::arith_op); | |
7939 ins_encode( form3_rs1_rs2_rd( op1, op2, R_G0 ) ); | |
7940 ins_pipe(ialu_cconly_reg_reg); | |
7941 %} | |
7942 | |
7943 instruct compI_iReg_imm13(flagsReg icc, iRegI op1, immI13 op2) %{ | |
7944 match(Set icc (CmpI op1 op2)); | |
7945 effect( DEF icc, USE op1 ); | |
7946 | |
7947 size(4); | |
7948 format %{ "CMP $op1,$op2" %} | |
7949 opcode(Assembler::subcc_op3, Assembler::arith_op); | |
7950 ins_encode( form3_rs1_simm13_rd( op1, op2, R_G0 ) ); | |
7951 ins_pipe(ialu_cconly_reg_imm); | |
7952 %} | |
7953 | |
7954 instruct testI_reg_reg( flagsReg icc, iRegI op1, iRegI op2, immI0 zero ) %{ | |
7955 match(Set icc (CmpI (AndI op1 op2) zero)); | |
7956 | |
7957 size(4); | |
7958 format %{ "BTST $op2,$op1" %} | |
7959 opcode(Assembler::andcc_op3, Assembler::arith_op); | |
7960 ins_encode( form3_rs1_rs2_rd( op1, op2, R_G0 ) ); | |
7961 ins_pipe(ialu_cconly_reg_reg_zero); | |
7962 %} | |
7963 | |
7964 instruct testI_reg_imm( flagsReg icc, iRegI op1, immI13 op2, immI0 zero ) %{ | |
7965 match(Set icc (CmpI (AndI op1 op2) zero)); | |
7966 | |
7967 size(4); | |
7968 format %{ "BTST $op2,$op1" %} | |
7969 opcode(Assembler::andcc_op3, Assembler::arith_op); | |
7970 ins_encode( form3_rs1_simm13_rd( op1, op2, R_G0 ) ); | |
7971 ins_pipe(ialu_cconly_reg_imm_zero); | |
7972 %} | |
7973 | |
7974 instruct compL_reg_reg(flagsRegL xcc, iRegL op1, iRegL op2 ) %{ | |
7975 match(Set xcc (CmpL op1 op2)); | |
7976 effect( DEF xcc, USE op1, USE op2 ); | |
7977 | |
7978 size(4); | |
7979 format %{ "CMP $op1,$op2\t\t! long" %} | |
7980 opcode(Assembler::subcc_op3, Assembler::arith_op); | |
7981 ins_encode( form3_rs1_rs2_rd( op1, op2, R_G0 ) ); | |
7982 ins_pipe(ialu_cconly_reg_reg); | |
7983 %} | |
7984 | |
7985 instruct compL_reg_con(flagsRegL xcc, iRegL op1, immL13 con) %{ | |
7986 match(Set xcc (CmpL op1 con)); | |
7987 effect( DEF xcc, USE op1, USE con ); | |
7988 | |
7989 size(4); | |
7990 format %{ "CMP $op1,$con\t\t! long" %} | |
7991 opcode(Assembler::subcc_op3, Assembler::arith_op); | |
7992 ins_encode( form3_rs1_simm13_rd( op1, con, R_G0 ) ); | |
7993 ins_pipe(ialu_cconly_reg_reg); | |
7994 %} | |
7995 | |
7996 instruct testL_reg_reg(flagsRegL xcc, iRegL op1, iRegL op2, immL0 zero) %{ | |
7997 match(Set xcc (CmpL (AndL op1 op2) zero)); | |
7998 effect( DEF xcc, USE op1, USE op2 ); | |
7999 | |
8000 size(4); | |
8001 format %{ "BTST $op1,$op2\t\t! long" %} | |
8002 opcode(Assembler::andcc_op3, Assembler::arith_op); | |
8003 ins_encode( form3_rs1_rs2_rd( op1, op2, R_G0 ) ); | |
8004 ins_pipe(ialu_cconly_reg_reg); | |
8005 %} | |
8006 | |
8007 // useful for checking the alignment of a pointer: | |
8008 instruct testL_reg_con(flagsRegL xcc, iRegL op1, immL13 con, immL0 zero) %{ | |
8009 match(Set xcc (CmpL (AndL op1 con) zero)); | |
8010 effect( DEF xcc, USE op1, USE con ); | |
8011 | |
8012 size(4); | |
8013 format %{ "BTST $op1,$con\t\t! long" %} | |
8014 opcode(Assembler::andcc_op3, Assembler::arith_op); | |
8015 ins_encode( form3_rs1_simm13_rd( op1, con, R_G0 ) ); | |
8016 ins_pipe(ialu_cconly_reg_reg); | |
8017 %} | |
8018 | |
8019 instruct compU_iReg_imm13(flagsRegU icc, iRegI op1, immU13 op2 ) %{ | |
8020 match(Set icc (CmpU op1 op2)); | |
8021 | |
8022 size(4); | |
8023 format %{ "CMP $op1,$op2\t! unsigned" %} | |
8024 opcode(Assembler::subcc_op3, Assembler::arith_op); | |
8025 ins_encode( form3_rs1_simm13_rd( op1, op2, R_G0 ) ); | |
8026 ins_pipe(ialu_cconly_reg_imm); | |
8027 %} | |
8028 | |
8029 // Compare Pointers | |
8030 instruct compP_iRegP(flagsRegP pcc, iRegP op1, iRegP op2 ) %{ | |
8031 match(Set pcc (CmpP op1 op2)); | |
8032 | |
8033 size(4); | |
8034 format %{ "CMP $op1,$op2\t! ptr" %} | |
8035 opcode(Assembler::subcc_op3, Assembler::arith_op); | |
8036 ins_encode( form3_rs1_rs2_rd( op1, op2, R_G0 ) ); | |
8037 ins_pipe(ialu_cconly_reg_reg); | |
8038 %} | |
8039 | |
8040 instruct compP_iRegP_imm13(flagsRegP pcc, iRegP op1, immP13 op2 ) %{ | |
8041 match(Set pcc (CmpP op1 op2)); | |
8042 | |
8043 size(4); | |
8044 format %{ "CMP $op1,$op2\t! ptr" %} | |
8045 opcode(Assembler::subcc_op3, Assembler::arith_op); | |
8046 ins_encode( form3_rs1_simm13_rd( op1, op2, R_G0 ) ); | |
8047 ins_pipe(ialu_cconly_reg_imm); | |
8048 %} | |
8049 | |
8050 //----------Max and Min-------------------------------------------------------- | |
8051 // Min Instructions | |
8052 // Conditional move for min | |
8053 instruct cmovI_reg_lt( iRegI op2, iRegI op1, flagsReg icc ) %{ | |
8054 effect( USE_DEF op2, USE op1, USE icc ); | |
8055 | |
8056 size(4); | |
8057 format %{ "MOVlt icc,$op1,$op2\t! min" %} | |
8058 opcode(Assembler::less); | |
8059 ins_encode( enc_cmov_reg_minmax(op2,op1) ); | |
8060 ins_pipe(ialu_reg_flags); | |
8061 %} | |
8062 | |
8063 // Min Register with Register. | |
8064 instruct minI_eReg(iRegI op1, iRegI op2) %{ | |
8065 match(Set op2 (MinI op1 op2)); | |
8066 ins_cost(DEFAULT_COST*2); | |
8067 expand %{ | |
8068 flagsReg icc; | |
8069 compI_iReg(icc,op1,op2); | |
8070 cmovI_reg_lt(op2,op1,icc); | |
8071 %} | |
8072 %} | |
8073 | |
8074 // Max Instructions | |
8075 // Conditional move for max | |
8076 instruct cmovI_reg_gt( iRegI op2, iRegI op1, flagsReg icc ) %{ | |
8077 effect( USE_DEF op2, USE op1, USE icc ); | |
8078 format %{ "MOVgt icc,$op1,$op2\t! max" %} | |
8079 opcode(Assembler::greater); | |
8080 ins_encode( enc_cmov_reg_minmax(op2,op1) ); | |
8081 ins_pipe(ialu_reg_flags); | |
8082 %} | |
8083 | |
8084 // Max Register with Register | |
8085 instruct maxI_eReg(iRegI op1, iRegI op2) %{ | |
8086 match(Set op2 (MaxI op1 op2)); | |
8087 ins_cost(DEFAULT_COST*2); | |
8088 expand %{ | |
8089 flagsReg icc; | |
8090 compI_iReg(icc,op1,op2); | |
8091 cmovI_reg_gt(op2,op1,icc); | |
8092 %} | |
8093 %} | |
8094 | |
8095 | |
8096 //----------Float Compares---------------------------------------------------- | |
8097 // Compare floating, generate condition code | |
8098 instruct cmpF_cc(flagsRegF fcc, regF src1, regF src2) %{ | |
8099 match(Set fcc (CmpF src1 src2)); | |
8100 | |
8101 size(4); | |
8102 format %{ "FCMPs $fcc,$src1,$src2" %} | |
8103 opcode(Assembler::fpop2_op3, Assembler::arith_op, Assembler::fcmps_opf); | |
8104 ins_encode( form3_opf_rs1F_rs2F_fcc( src1, src2, fcc ) ); | |
8105 ins_pipe(faddF_fcc_reg_reg_zero); | |
8106 %} | |
8107 | |
8108 instruct cmpD_cc(flagsRegF fcc, regD src1, regD src2) %{ | |
8109 match(Set fcc (CmpD src1 src2)); | |
8110 | |
8111 size(4); | |
8112 format %{ "FCMPd $fcc,$src1,$src2" %} | |
8113 opcode(Assembler::fpop2_op3, Assembler::arith_op, Assembler::fcmpd_opf); | |
8114 ins_encode( form3_opf_rs1D_rs2D_fcc( src1, src2, fcc ) ); | |
8115 ins_pipe(faddD_fcc_reg_reg_zero); | |
8116 %} | |
8117 | |
8118 | |
8119 // Compare floating, generate -1,0,1 | |
8120 instruct cmpF_reg(iRegI dst, regF src1, regF src2, flagsRegF0 fcc0) %{ | |
8121 match(Set dst (CmpF3 src1 src2)); | |
8122 effect(KILL fcc0); | |
8123 ins_cost(DEFAULT_COST*3+BRANCH_COST*3); | |
8124 format %{ "fcmpl $dst,$src1,$src2" %} | |
8125 // Primary = float | |
8126 opcode( true ); | |
8127 ins_encode( floating_cmp( dst, src1, src2 ) ); | |
8128 ins_pipe( floating_cmp ); | |
8129 %} | |
8130 | |
8131 instruct cmpD_reg(iRegI dst, regD src1, regD src2, flagsRegF0 fcc0) %{ | |
8132 match(Set dst (CmpD3 src1 src2)); | |
8133 effect(KILL fcc0); | |
8134 ins_cost(DEFAULT_COST*3+BRANCH_COST*3); | |
8135 format %{ "dcmpl $dst,$src1,$src2" %} | |
8136 // Primary = double (not float) | |
8137 opcode( false ); | |
8138 ins_encode( floating_cmp( dst, src1, src2 ) ); | |
8139 ins_pipe( floating_cmp ); | |
8140 %} | |
8141 | |
8142 //----------Branches--------------------------------------------------------- | |
8143 // Jump | |
8144 // (compare 'operand indIndex' and 'instruct addP_reg_reg' above) | |
8145 instruct jumpXtnd(iRegX switch_val, o7RegI table) %{ | |
8146 match(Jump switch_val); | |
8147 | |
8148 ins_cost(350); | |
8149 | |
8150 format %{ "SETHI [hi(table_base)],O7\n\t" | |
8151 "ADD O7, lo(table_base), O7\n\t" | |
8152 "LD [O7+$switch_val], O7\n\t" | |
8153 "JUMP O7" | |
8154 %} | |
8155 ins_encode( jump_enc( switch_val, table) ); | |
8156 ins_pc_relative(1); | |
8157 ins_pipe(ialu_reg_reg); | |
8158 %} | |
8159 | |
8160 // Direct Branch. Use V8 version with longer range. | |
8161 instruct branch(label labl) %{ | |
8162 match(Goto); | |
8163 effect(USE labl); | |
8164 | |
8165 size(8); | |
8166 ins_cost(BRANCH_COST); | |
8167 format %{ "BA $labl" %} | |
8168 // Prim = bits 24-22, Secnd = bits 31-30, Tert = cond | |
8169 opcode(Assembler::br_op2, Assembler::branch_op, Assembler::always); | |
8170 ins_encode( enc_ba( labl ) ); | |
8171 ins_pc_relative(1); | |
8172 ins_pipe(br); | |
8173 %} | |
8174 | |
8175 // Conditional Direct Branch | |
8176 instruct branchCon(cmpOp cmp, flagsReg icc, label labl) %{ | |
8177 match(If cmp icc); | |
8178 effect(USE labl); | |
8179 | |
8180 size(8); | |
8181 ins_cost(BRANCH_COST); | |
8182 format %{ "BP$cmp $icc,$labl" %} | |
8183 // Prim = bits 24-22, Secnd = bits 31-30 | |
8184 ins_encode( enc_bp( labl, cmp, icc ) ); | |
8185 ins_pc_relative(1); | |
8186 ins_pipe(br_cc); | |
8187 %} | |
8188 | |
8189 // Branch-on-register tests all 64 bits. We assume that values | |
8190 // in 64-bit registers always remains zero or sign extended | |
8191 // unless our code munges the high bits. Interrupts can chop | |
8192 // the high order bits to zero or sign at any time. | |
8193 instruct branchCon_regI(cmpOp_reg cmp, iRegI op1, immI0 zero, label labl) %{ | |
8194 match(If cmp (CmpI op1 zero)); | |
8195 predicate(can_branch_register(_kids[0]->_leaf, _kids[1]->_leaf)); | |
8196 effect(USE labl); | |
8197 | |
8198 size(8); | |
8199 ins_cost(BRANCH_COST); | |
8200 format %{ "BR$cmp $op1,$labl" %} | |
8201 ins_encode( enc_bpr( labl, cmp, op1 ) ); | |
8202 ins_pc_relative(1); | |
8203 ins_pipe(br_reg); | |
8204 %} | |
8205 | |
8206 instruct branchCon_regP(cmpOp_reg cmp, iRegP op1, immP0 null, label labl) %{ | |
8207 match(If cmp (CmpP op1 null)); | |
8208 predicate(can_branch_register(_kids[0]->_leaf, _kids[1]->_leaf)); | |
8209 effect(USE labl); | |
8210 | |
8211 size(8); | |
8212 ins_cost(BRANCH_COST); | |
8213 format %{ "BR$cmp $op1,$labl" %} | |
8214 ins_encode( enc_bpr( labl, cmp, op1 ) ); | |
8215 ins_pc_relative(1); | |
8216 ins_pipe(br_reg); | |
8217 %} | |
8218 | |
8219 instruct branchCon_regL(cmpOp_reg cmp, iRegL op1, immL0 zero, label labl) %{ | |
8220 match(If cmp (CmpL op1 zero)); | |
8221 predicate(can_branch_register(_kids[0]->_leaf, _kids[1]->_leaf)); | |
8222 effect(USE labl); | |
8223 | |
8224 size(8); | |
8225 ins_cost(BRANCH_COST); | |
8226 format %{ "BR$cmp $op1,$labl" %} | |
8227 ins_encode( enc_bpr( labl, cmp, op1 ) ); | |
8228 ins_pc_relative(1); | |
8229 ins_pipe(br_reg); | |
8230 %} | |
8231 | |
8232 instruct branchConU(cmpOpU cmp, flagsRegU icc, label labl) %{ | |
8233 match(If cmp icc); | |
8234 effect(USE labl); | |
8235 | |
8236 format %{ "BP$cmp $icc,$labl" %} | |
8237 // Prim = bits 24-22, Secnd = bits 31-30 | |
8238 ins_encode( enc_bp( labl, cmp, icc ) ); | |
8239 ins_pc_relative(1); | |
8240 ins_pipe(br_cc); | |
8241 %} | |
8242 | |
8243 instruct branchConP(cmpOpP cmp, flagsRegP pcc, label labl) %{ | |
8244 match(If cmp pcc); | |
8245 effect(USE labl); | |
8246 | |
8247 size(8); | |
8248 ins_cost(BRANCH_COST); | |
8249 format %{ "BP$cmp $pcc,$labl" %} | |
8250 // Prim = bits 24-22, Secnd = bits 31-30 | |
8251 ins_encode( enc_bpx( labl, cmp, pcc ) ); | |
8252 ins_pc_relative(1); | |
8253 ins_pipe(br_cc); | |
8254 %} | |
8255 | |
8256 instruct branchConF(cmpOpF cmp, flagsRegF fcc, label labl) %{ | |
8257 match(If cmp fcc); | |
8258 effect(USE labl); | |
8259 | |
8260 size(8); | |
8261 ins_cost(BRANCH_COST); | |
8262 format %{ "FBP$cmp $fcc,$labl" %} | |
8263 // Prim = bits 24-22, Secnd = bits 31-30 | |
8264 ins_encode( enc_fbp( labl, cmp, fcc ) ); | |
8265 ins_pc_relative(1); | |
8266 ins_pipe(br_fcc); | |
8267 %} | |
8268 | |
8269 instruct branchLoopEnd(cmpOp cmp, flagsReg icc, label labl) %{ | |
8270 match(CountedLoopEnd cmp icc); | |
8271 effect(USE labl); | |
8272 | |
8273 size(8); | |
8274 ins_cost(BRANCH_COST); | |
8275 format %{ "BP$cmp $icc,$labl\t! Loop end" %} | |
8276 // Prim = bits 24-22, Secnd = bits 31-30 | |
8277 ins_encode( enc_bp( labl, cmp, icc ) ); | |
8278 ins_pc_relative(1); | |
8279 ins_pipe(br_cc); | |
8280 %} | |
8281 | |
8282 instruct branchLoopEndU(cmpOpU cmp, flagsRegU icc, label labl) %{ | |
8283 match(CountedLoopEnd cmp icc); | |
8284 effect(USE labl); | |
8285 | |
8286 size(8); | |
8287 ins_cost(BRANCH_COST); | |
8288 format %{ "BP$cmp $icc,$labl\t! Loop end" %} | |
8289 // Prim = bits 24-22, Secnd = bits 31-30 | |
8290 ins_encode( enc_bp( labl, cmp, icc ) ); | |
8291 ins_pc_relative(1); | |
8292 ins_pipe(br_cc); | |
8293 %} | |
8294 | |
8295 // ============================================================================ | |
8296 // Long Compare | |
8297 // | |
8298 // Currently we hold longs in 2 registers. Comparing such values efficiently | |
8299 // is tricky. The flavor of compare used depends on whether we are testing | |
8300 // for LT, LE, or EQ. For a simple LT test we can check just the sign bit. | |
8301 // The GE test is the negated LT test. The LE test can be had by commuting | |
8302 // the operands (yielding a GE test) and then negating; negate again for the | |
8303 // GT test. The EQ test is done by ORcc'ing the high and low halves, and the | |
8304 // NE test is negated from that. | |
8305 | |
8306 // Due to a shortcoming in the ADLC, it mixes up expressions like: | |
8307 // (foo (CmpI (CmpL X Y) 0)) and (bar (CmpI (CmpL X 0L) 0)). Note the | |
8308 // difference between 'Y' and '0L'. The tree-matches for the CmpI sections | |
8309 // are collapsed internally in the ADLC's dfa-gen code. The match for | |
8310 // (CmpI (CmpL X Y) 0) is silently replaced with (CmpI (CmpL X 0L) 0) and the | |
8311 // foo match ends up with the wrong leaf. One fix is to not match both | |
8312 // reg-reg and reg-zero forms of long-compare. This is unfortunate because | |
8313 // both forms beat the trinary form of long-compare and both are very useful | |
8314 // on Intel which has so few registers. | |
8315 | |
8316 instruct branchCon_long(cmpOp cmp, flagsRegL xcc, label labl) %{ | |
8317 match(If cmp xcc); | |
8318 effect(USE labl); | |
8319 | |
8320 size(8); | |
8321 ins_cost(BRANCH_COST); | |
8322 format %{ "BP$cmp $xcc,$labl" %} | |
8323 // Prim = bits 24-22, Secnd = bits 31-30 | |
8324 ins_encode( enc_bpl( labl, cmp, xcc ) ); | |
8325 ins_pc_relative(1); | |
8326 ins_pipe(br_cc); | |
8327 %} | |
8328 | |
8329 // Manifest a CmpL3 result in an integer register. Very painful. | |
8330 // This is the test to avoid. | |
8331 instruct cmpL3_reg_reg(iRegI dst, iRegL src1, iRegL src2, flagsReg ccr ) %{ | |
8332 match(Set dst (CmpL3 src1 src2) ); | |
8333 effect( KILL ccr ); | |
8334 ins_cost(6*DEFAULT_COST); | |
8335 size(24); | |
8336 format %{ "CMP $src1,$src2\t\t! long\n" | |
8337 "\tBLT,a,pn done\n" | |
8338 "\tMOV -1,$dst\t! delay slot\n" | |
8339 "\tBGT,a,pn done\n" | |
8340 "\tMOV 1,$dst\t! delay slot\n" | |
8341 "\tCLR $dst\n" | |
8342 "done:" %} | |
8343 ins_encode( cmpl_flag(src1,src2,dst) ); | |
8344 ins_pipe(cmpL_reg); | |
8345 %} | |
8346 | |
8347 // Conditional move | |
8348 instruct cmovLL_reg(cmpOp cmp, flagsRegL xcc, iRegL dst, iRegL src) %{ | |
8349 match(Set dst (CMoveL (Binary cmp xcc) (Binary dst src))); | |
8350 ins_cost(150); | |
8351 format %{ "MOV$cmp $xcc,$src,$dst\t! long" %} | |
8352 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::xcc)) ); | |
8353 ins_pipe(ialu_reg); | |
8354 %} | |
8355 | |
8356 instruct cmovLL_imm(cmpOp cmp, flagsRegL xcc, iRegL dst, immL0 src) %{ | |
8357 match(Set dst (CMoveL (Binary cmp xcc) (Binary dst src))); | |
8358 ins_cost(140); | |
8359 format %{ "MOV$cmp $xcc,$src,$dst\t! long" %} | |
8360 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::xcc)) ); | |
8361 ins_pipe(ialu_imm); | |
8362 %} | |
8363 | |
8364 instruct cmovIL_reg(cmpOp cmp, flagsRegL xcc, iRegI dst, iRegI src) %{ | |
8365 match(Set dst (CMoveI (Binary cmp xcc) (Binary dst src))); | |
8366 ins_cost(150); | |
8367 format %{ "MOV$cmp $xcc,$src,$dst" %} | |
8368 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::xcc)) ); | |
8369 ins_pipe(ialu_reg); | |
8370 %} | |
8371 | |
8372 instruct cmovIL_imm(cmpOp cmp, flagsRegL xcc, iRegI dst, immI11 src) %{ | |
8373 match(Set dst (CMoveI (Binary cmp xcc) (Binary dst src))); | |
8374 ins_cost(140); | |
8375 format %{ "MOV$cmp $xcc,$src,$dst" %} | |
8376 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::xcc)) ); | |
8377 ins_pipe(ialu_imm); | |
8378 %} | |
8379 | |
8380 instruct cmovPL_reg(cmpOp cmp, flagsRegL xcc, iRegP dst, iRegP src) %{ | |
8381 match(Set dst (CMoveP (Binary cmp xcc) (Binary dst src))); | |
8382 ins_cost(150); | |
8383 format %{ "MOV$cmp $xcc,$src,$dst" %} | |
8384 ins_encode( enc_cmov_reg(cmp,dst,src, (Assembler::xcc)) ); | |
8385 ins_pipe(ialu_reg); | |
8386 %} | |
8387 | |
8388 instruct cmovPL_imm(cmpOp cmp, flagsRegL xcc, iRegP dst, immP0 src) %{ | |
8389 match(Set dst (CMoveP (Binary cmp xcc) (Binary dst src))); | |
8390 ins_cost(140); | |
8391 format %{ "MOV$cmp $xcc,$src,$dst" %} | |
8392 ins_encode( enc_cmov_imm(cmp,dst,src, (Assembler::xcc)) ); | |
8393 ins_pipe(ialu_imm); | |
8394 %} | |
8395 | |
8396 instruct cmovFL_reg(cmpOp cmp, flagsRegL xcc, regF dst, regF src) %{ | |
8397 match(Set dst (CMoveF (Binary cmp xcc) (Binary dst src))); | |
8398 ins_cost(150); | |
8399 opcode(0x101); | |
8400 format %{ "FMOVS$cmp $xcc,$src,$dst" %} | |
8401 ins_encode( enc_cmovf_reg(cmp,dst,src, (Assembler::xcc)) ); | |
8402 ins_pipe(int_conditional_float_move); | |
8403 %} | |
8404 | |
8405 instruct cmovDL_reg(cmpOp cmp, flagsRegL xcc, regD dst, regD src) %{ | |
8406 match(Set dst (CMoveD (Binary cmp xcc) (Binary dst src))); | |
8407 ins_cost(150); | |
8408 opcode(0x102); | |
8409 format %{ "FMOVD$cmp $xcc,$src,$dst" %} | |
8410 ins_encode( enc_cmovf_reg(cmp,dst,src, (Assembler::xcc)) ); | |
8411 ins_pipe(int_conditional_float_move); | |
8412 %} | |
8413 | |
8414 // ============================================================================ | |
8415 // Safepoint Instruction | |
8416 instruct safePoint_poll(iRegP poll) %{ | |
8417 match(SafePoint poll); | |
8418 effect(USE poll); | |
8419 | |
8420 size(4); | |
8421 #ifdef _LP64 | |
8422 format %{ "LDX [$poll],R_G0\t! Safepoint: poll for GC" %} | |
8423 #else | |
8424 format %{ "LDUW [$poll],R_G0\t! Safepoint: poll for GC" %} | |
8425 #endif | |
8426 ins_encode %{ | |
8427 __ relocate(relocInfo::poll_type); | |
8428 __ ld_ptr($poll$$Register, 0, G0); | |
8429 %} | |
8430 ins_pipe(loadPollP); | |
8431 %} | |
8432 | |
8433 // ============================================================================ | |
8434 // Call Instructions | |
8435 // Call Java Static Instruction | |
8436 instruct CallStaticJavaDirect( method meth ) %{ | |
8437 match(CallStaticJava); | |
8438 effect(USE meth); | |
8439 | |
8440 size(8); | |
8441 ins_cost(CALL_COST); | |
8442 format %{ "CALL,static ; NOP ==> " %} | |
8443 ins_encode( Java_Static_Call( meth ), call_epilog ); | |
8444 ins_pc_relative(1); | |
8445 ins_pipe(simple_call); | |
8446 %} | |
8447 | |
8448 // Call Java Dynamic Instruction | |
8449 instruct CallDynamicJavaDirect( method meth ) %{ | |
8450 match(CallDynamicJava); | |
8451 effect(USE meth); | |
8452 | |
8453 ins_cost(CALL_COST); | |
8454 format %{ "SET (empty),R_G5\n\t" | |
8455 "CALL,dynamic ; NOP ==> " %} | |
8456 ins_encode( Java_Dynamic_Call( meth ), call_epilog ); | |
8457 ins_pc_relative(1); | |
8458 ins_pipe(call); | |
8459 %} | |
8460 | |
8461 // Call Runtime Instruction | |
8462 instruct CallRuntimeDirect(method meth, l7RegP l7) %{ | |
8463 match(CallRuntime); | |
8464 effect(USE meth, KILL l7); | |
8465 ins_cost(CALL_COST); | |
8466 format %{ "CALL,runtime" %} | |
8467 ins_encode( Java_To_Runtime( meth ), | |
8468 call_epilog, adjust_long_from_native_call ); | |
8469 ins_pc_relative(1); | |
8470 ins_pipe(simple_call); | |
8471 %} | |
8472 | |
8473 // Call runtime without safepoint - same as CallRuntime | |
8474 instruct CallLeafDirect(method meth, l7RegP l7) %{ | |
8475 match(CallLeaf); | |
8476 effect(USE meth, KILL l7); | |
8477 ins_cost(CALL_COST); | |
8478 format %{ "CALL,runtime leaf" %} | |
8479 ins_encode( Java_To_Runtime( meth ), | |
8480 call_epilog, | |
8481 adjust_long_from_native_call ); | |
8482 ins_pc_relative(1); | |
8483 ins_pipe(simple_call); | |
8484 %} | |
8485 | |
8486 // Call runtime without safepoint - same as CallLeaf | |
8487 instruct CallLeafNoFPDirect(method meth, l7RegP l7) %{ | |
8488 match(CallLeafNoFP); | |
8489 effect(USE meth, KILL l7); | |
8490 ins_cost(CALL_COST); | |
8491 format %{ "CALL,runtime leaf nofp" %} | |
8492 ins_encode( Java_To_Runtime( meth ), | |
8493 call_epilog, | |
8494 adjust_long_from_native_call ); | |
8495 ins_pc_relative(1); | |
8496 ins_pipe(simple_call); | |
8497 %} | |
8498 | |
8499 // Tail Call; Jump from runtime stub to Java code. | |
8500 // Also known as an 'interprocedural jump'. | |
8501 // Target of jump will eventually return to caller. | |
8502 // TailJump below removes the return address. | |
8503 instruct TailCalljmpInd(g3RegP jump_target, inline_cache_regP method_oop) %{ | |
8504 match(TailCall jump_target method_oop ); | |
8505 | |
8506 ins_cost(CALL_COST); | |
8507 format %{ "Jmp $jump_target ; NOP \t! $method_oop holds method oop" %} | |
8508 ins_encode(form_jmpl(jump_target)); | |
8509 ins_pipe(tail_call); | |
8510 %} | |
8511 | |
8512 | |
8513 // Return Instruction | |
8514 instruct Ret() %{ | |
8515 match(Return); | |
8516 | |
8517 // The epilogue node did the ret already. | |
8518 size(0); | |
8519 format %{ "! return" %} | |
8520 ins_encode(); | |
8521 ins_pipe(empty); | |
8522 %} | |
8523 | |
8524 | |
8525 // Tail Jump; remove the return address; jump to target. | |
8526 // TailCall above leaves the return address around. | |
8527 // TailJump is used in only one place, the rethrow_Java stub (fancy_jump=2). | |
8528 // ex_oop (Exception Oop) is needed in %o0 at the jump. As there would be a | |
8529 // "restore" before this instruction (in Epilogue), we need to materialize it | |
8530 // in %i0. | |
8531 instruct tailjmpInd(g1RegP jump_target, i0RegP ex_oop) %{ | |
8532 match( TailJump jump_target ex_oop ); | |
8533 ins_cost(CALL_COST); | |
8534 format %{ "! discard R_O7\n\t" | |
8535 "Jmp $jump_target ; ADD O7,8,O1 \t! $ex_oop holds exc. oop" %} | |
8536 ins_encode(form_jmpl_set_exception_pc(jump_target)); | |
8537 // opcode(Assembler::jmpl_op3, Assembler::arith_op); | |
8538 // The hack duplicates the exception oop into G3, so that CreateEx can use it there. | |
8539 // ins_encode( form3_rs1_simm13_rd( jump_target, 0x00, R_G0 ), move_return_pc_to_o1() ); | |
8540 ins_pipe(tail_call); | |
8541 %} | |
8542 | |
8543 // Create exception oop: created by stack-crawling runtime code. | |
8544 // Created exception is now available to this handler, and is setup | |
8545 // just prior to jumping to this handler. No code emitted. | |
8546 instruct CreateException( o0RegP ex_oop ) | |
8547 %{ | |
8548 match(Set ex_oop (CreateEx)); | |
8549 ins_cost(0); | |
8550 | |
8551 size(0); | |
8552 // use the following format syntax | |
8553 format %{ "! exception oop is in R_O0; no code emitted" %} | |
8554 ins_encode(); | |
8555 ins_pipe(empty); | |
8556 %} | |
8557 | |
8558 | |
8559 // Rethrow exception: | |
8560 // The exception oop will come in the first argument position. | |
8561 // Then JUMP (not call) to the rethrow stub code. | |
8562 instruct RethrowException() | |
8563 %{ | |
8564 match(Rethrow); | |
8565 ins_cost(CALL_COST); | |
8566 | |
8567 // use the following format syntax | |
8568 format %{ "Jmp rethrow_stub" %} | |
8569 ins_encode(enc_rethrow); | |
8570 ins_pipe(tail_call); | |
8571 %} | |
8572 | |
8573 | |
8574 // Die now | |
8575 instruct ShouldNotReachHere( ) | |
8576 %{ | |
8577 match(Halt); | |
8578 ins_cost(CALL_COST); | |
8579 | |
8580 size(4); | |
8581 // Use the following format syntax | |
8582 format %{ "ILLTRAP ; ShouldNotReachHere" %} | |
8583 ins_encode( form2_illtrap() ); | |
8584 ins_pipe(tail_call); | |
8585 %} | |
8586 | |
8587 // ============================================================================ | |
8588 // The 2nd slow-half of a subtype check. Scan the subklass's 2ndary superklass | |
8589 // array for an instance of the superklass. Set a hidden internal cache on a | |
8590 // hit (cache is checked with exposed code in gen_subtype_check()). Return | |
8591 // not zero for a miss or zero for a hit. The encoding ALSO sets flags. | |
8592 instruct partialSubtypeCheck( o0RegP index, o1RegP sub, o2RegP super, flagsRegP pcc, o7RegP o7 ) %{ | |
8593 match(Set index (PartialSubtypeCheck sub super)); | |
8594 effect( KILL pcc, KILL o7 ); | |
8595 ins_cost(DEFAULT_COST*10); | |
8596 format %{ "CALL PartialSubtypeCheck\n\tNOP" %} | |
8597 ins_encode( enc_PartialSubtypeCheck() ); | |
8598 ins_pipe(partial_subtype_check_pipe); | |
8599 %} | |
8600 | |
8601 instruct partialSubtypeCheck_vs_zero( flagsRegP pcc, o1RegP sub, o2RegP super, immP0 zero, o0RegP idx, o7RegP o7 ) %{ | |
8602 match(Set pcc (CmpP (PartialSubtypeCheck sub super) zero)); | |
8603 effect( KILL idx, KILL o7 ); | |
8604 ins_cost(DEFAULT_COST*10); | |
8605 format %{ "CALL PartialSubtypeCheck\n\tNOP\t# (sets condition codes)" %} | |
8606 ins_encode( enc_PartialSubtypeCheck() ); | |
8607 ins_pipe(partial_subtype_check_pipe); | |
8608 %} | |
8609 | |
8610 // ============================================================================ | |
8611 // inlined locking and unlocking | |
8612 | |
8613 instruct cmpFastLock(flagsRegP pcc, iRegP object, iRegP box, iRegP scratch2, o7RegP scratch ) %{ | |
8614 match(Set pcc (FastLock object box)); | |
8615 | |
8616 effect(KILL scratch, TEMP scratch2); | |
8617 ins_cost(100); | |
8618 | |
8619 size(4*112); // conservative overestimation ... | |
8620 format %{ "FASTLOCK $object, $box; KILL $scratch, $scratch2, $box" %} | |
8621 ins_encode( Fast_Lock(object, box, scratch, scratch2) ); | |
8622 ins_pipe(long_memory_op); | |
8623 %} | |
8624 | |
8625 | |
8626 instruct cmpFastUnlock(flagsRegP pcc, iRegP object, iRegP box, iRegP scratch2, o7RegP scratch ) %{ | |
8627 match(Set pcc (FastUnlock object box)); | |
8628 effect(KILL scratch, TEMP scratch2); | |
8629 ins_cost(100); | |
8630 | |
8631 size(4*120); // conservative overestimation ... | |
8632 format %{ "FASTUNLOCK $object, $box; KILL $scratch, $scratch2, $box" %} | |
8633 ins_encode( Fast_Unlock(object, box, scratch, scratch2) ); | |
8634 ins_pipe(long_memory_op); | |
8635 %} | |
8636 | |
8637 // Count and Base registers are fixed because the allocator cannot | |
8638 // kill unknown registers. The encodings are generic. | |
8639 instruct clear_array(iRegX cnt, iRegP base, iRegX temp, Universe dummy, flagsReg ccr) %{ | |
8640 match(Set dummy (ClearArray cnt base)); | |
8641 effect(TEMP temp, KILL ccr); | |
8642 ins_cost(300); | |
8643 format %{ "MOV $cnt,$temp\n" | |
8644 "loop: SUBcc $temp,8,$temp\t! Count down a dword of bytes\n" | |
8645 " BRge loop\t\t! Clearing loop\n" | |
8646 " STX G0,[$base+$temp]\t! delay slot" %} | |
8647 ins_encode( enc_Clear_Array(cnt, base, temp) ); | |
8648 ins_pipe(long_memory_op); | |
8649 %} | |
8650 | |
8651 instruct string_compare(o0RegP str1, o1RegP str2, g3RegP tmp1, g4RegP tmp2, notemp_iRegI result, flagsReg ccr) %{ | |
8652 match(Set result (StrComp str1 str2)); | |
8653 effect(USE_KILL str1, USE_KILL str2, KILL tmp1, KILL tmp2, KILL ccr); | |
8654 ins_cost(300); | |
8655 format %{ "String Compare $str1,$str2 -> $result" %} | |
8656 ins_encode( enc_String_Compare(str1, str2, tmp1, tmp2, result) ); | |
8657 ins_pipe(long_memory_op); | |
8658 %} | |
8659 | |
8660 // ============================================================================ | |
8661 //------------Bytes reverse-------------------------------------------------- | |
8662 | |
8663 instruct bytes_reverse_int(iRegI dst, stackSlotI src) %{ | |
8664 match(Set dst (ReverseBytesI src)); | |
8665 effect(DEF dst, USE src); | |
8666 | |
8667 // Op cost is artificially doubled to make sure that load or store | |
8668 // instructions are preferred over this one which requires a spill | |
8669 // onto a stack slot. | |
8670 ins_cost(2*DEFAULT_COST + MEMORY_REF_COST); | |
8671 size(8); | |
8672 format %{ "LDUWA $src, $dst\t!asi=primary_little" %} | |
8673 opcode(Assembler::lduwa_op3); | |
8674 ins_encode( form3_mem_reg_little(src, dst) ); | |
8675 ins_pipe( iload_mem ); | |
8676 %} | |
8677 | |
8678 instruct bytes_reverse_long(iRegL dst, stackSlotL src) %{ | |
8679 match(Set dst (ReverseBytesL src)); | |
8680 effect(DEF dst, USE src); | |
8681 | |
8682 // Op cost is artificially doubled to make sure that load or store | |
8683 // instructions are preferred over this one which requires a spill | |
8684 // onto a stack slot. | |
8685 ins_cost(2*DEFAULT_COST + MEMORY_REF_COST); | |
8686 size(8); | |
8687 format %{ "LDXA $src, $dst\t!asi=primary_little" %} | |
8688 | |
8689 opcode(Assembler::ldxa_op3); | |
8690 ins_encode( form3_mem_reg_little(src, dst) ); | |
8691 ins_pipe( iload_mem ); | |
8692 %} | |
8693 | |
8694 // Load Integer reversed byte order | |
8695 instruct loadI_reversed(iRegI dst, memory src) %{ | |
8696 match(Set dst (ReverseBytesI (LoadI src))); | |
8697 | |
8698 ins_cost(DEFAULT_COST + MEMORY_REF_COST); | |
8699 size(8); | |
8700 format %{ "LDUWA $src, $dst\t!asi=primary_little" %} | |
8701 | |
8702 opcode(Assembler::lduwa_op3); | |
8703 ins_encode( form3_mem_reg_little( src, dst) ); | |
8704 ins_pipe(iload_mem); | |
8705 %} | |
8706 | |
8707 // Load Long - aligned and reversed | |
8708 instruct loadL_reversed(iRegL dst, memory src) %{ | |
8709 match(Set dst (ReverseBytesL (LoadL src))); | |
8710 | |
8711 ins_cost(DEFAULT_COST + MEMORY_REF_COST); | |
8712 size(8); | |
8713 format %{ "LDXA $src, $dst\t!asi=primary_little" %} | |
8714 | |
8715 opcode(Assembler::ldxa_op3); | |
8716 ins_encode( form3_mem_reg_little( src, dst ) ); | |
8717 ins_pipe(iload_mem); | |
8718 %} | |
8719 | |
8720 // Store Integer reversed byte order | |
8721 instruct storeI_reversed(memory dst, iRegI src) %{ | |
8722 match(Set dst (StoreI dst (ReverseBytesI src))); | |
8723 | |
8724 ins_cost(MEMORY_REF_COST); | |
8725 size(8); | |
8726 format %{ "STWA $src, $dst\t!asi=primary_little" %} | |
8727 | |
8728 opcode(Assembler::stwa_op3); | |
8729 ins_encode( form3_mem_reg_little( dst, src) ); | |
8730 ins_pipe(istore_mem_reg); | |
8731 %} | |
8732 | |
8733 // Store Long reversed byte order | |
8734 instruct storeL_reversed(memory dst, iRegL src) %{ | |
8735 match(Set dst (StoreL dst (ReverseBytesL src))); | |
8736 | |
8737 ins_cost(MEMORY_REF_COST); | |
8738 size(8); | |
8739 format %{ "STXA $src, $dst\t!asi=primary_little" %} | |
8740 | |
8741 opcode(Assembler::stxa_op3); | |
8742 ins_encode( form3_mem_reg_little( dst, src) ); | |
8743 ins_pipe(istore_mem_reg); | |
8744 %} | |
8745 | |
8746 //----------PEEPHOLE RULES----------------------------------------------------- | |
8747 // These must follow all instruction definitions as they use the names | |
8748 // defined in the instructions definitions. | |
8749 // | |
8750 // peepmatch ( root_instr_name [preceeding_instruction]* ); | |
8751 // | |
8752 // peepconstraint %{ | |
8753 // (instruction_number.operand_name relational_op instruction_number.operand_name | |
8754 // [, ...] ); | |
8755 // // instruction numbers are zero-based using left to right order in peepmatch | |
8756 // | |
8757 // peepreplace ( instr_name ( [instruction_number.operand_name]* ) ); | |
8758 // // provide an instruction_number.operand_name for each operand that appears | |
8759 // // in the replacement instruction's match rule | |
8760 // | |
8761 // ---------VM FLAGS--------------------------------------------------------- | |
8762 // | |
8763 // All peephole optimizations can be turned off using -XX:-OptoPeephole | |
8764 // | |
8765 // Each peephole rule is given an identifying number starting with zero and | |
8766 // increasing by one in the order seen by the parser. An individual peephole | |
8767 // can be enabled, and all others disabled, by using -XX:OptoPeepholeAt=# | |
8768 // on the command-line. | |
8769 // | |
8770 // ---------CURRENT LIMITATIONS---------------------------------------------- | |
8771 // | |
8772 // Only match adjacent instructions in same basic block | |
8773 // Only equality constraints | |
8774 // Only constraints between operands, not (0.dest_reg == EAX_enc) | |
8775 // Only one replacement instruction | |
8776 // | |
8777 // ---------EXAMPLE---------------------------------------------------------- | |
8778 // | |
8779 // // pertinent parts of existing instructions in architecture description | |
8780 // instruct movI(eRegI dst, eRegI src) %{ | |
8781 // match(Set dst (CopyI src)); | |
8782 // %} | |
8783 // | |
8784 // instruct incI_eReg(eRegI dst, immI1 src, eFlagsReg cr) %{ | |
8785 // match(Set dst (AddI dst src)); | |
8786 // effect(KILL cr); | |
8787 // %} | |
8788 // | |
8789 // // Change (inc mov) to lea | |
8790 // peephole %{ | |
8791 // // increment preceeded by register-register move | |
8792 // peepmatch ( incI_eReg movI ); | |
8793 // // require that the destination register of the increment | |
8794 // // match the destination register of the move | |
8795 // peepconstraint ( 0.dst == 1.dst ); | |
8796 // // construct a replacement instruction that sets | |
8797 // // the destination to ( move's source register + one ) | |
8798 // peepreplace ( incI_eReg_immI1( 0.dst 1.src 0.src ) ); | |
8799 // %} | |
8800 // | |
8801 | |
8802 // // Change load of spilled value to only a spill | |
8803 // instruct storeI(memory mem, eRegI src) %{ | |
8804 // match(Set mem (StoreI mem src)); | |
8805 // %} | |
8806 // | |
8807 // instruct loadI(eRegI dst, memory mem) %{ | |
8808 // match(Set dst (LoadI mem)); | |
8809 // %} | |
8810 // | |
8811 // peephole %{ | |
8812 // peepmatch ( loadI storeI ); | |
8813 // peepconstraint ( 1.src == 0.dst, 1.mem == 0.mem ); | |
8814 // peepreplace ( storeI( 1.mem 1.mem 1.src ) ); | |
8815 // %} | |
8816 | |
8817 //----------SMARTSPILL RULES--------------------------------------------------- | |
8818 // These must follow all instruction definitions as they use the names | |
8819 // defined in the instructions definitions. | |
8820 // | |
8821 // SPARC will probably not have any of these rules due to RISC instruction set. | |
8822 | |
8823 //----------PIPELINE----------------------------------------------------------- | |
8824 // Rules which define the behavior of the target architectures pipeline. |