--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/cpu/sparc/vm/vtableStubs_sparc.cpp	Sat Dec 01 00:00:00 2007 +0000
@@ -0,0 +1,280 @@
+/*
+ * Copyright 1997-2006 Sun Microsystems, Inc.  All Rights Reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
+ * CA 95054 USA or visit www.sun.com if you need additional information or
+ * have any questions.
+ *
+ */
+
+#include "incls/_precompiled.incl"
+#include "incls/_vtableStubs_sparc.cpp.incl"
+
+// machine-dependent part of VtableStubs: create vtableStub of correct size and
+// initialize its code
+
+#define __ masm->
+
+
+#ifndef PRODUCT
+extern "C" void bad_compiled_vtable_index(JavaThread* thread, oopDesc* receiver, int index);
+#endif
+
+
+// Used by compiler only; may use only caller saved, non-argument registers
+// NOTE:  %%%% if any change is made to this stub make sure that the function
+//             pd_code_size_limit is changed to ensure the correct size for VtableStub
+VtableStub* VtableStubs::create_vtable_stub(int vtable_index) {
+  const int sparc_code_length = VtableStub::pd_code_size_limit(true);
+  VtableStub* s = new(sparc_code_length) VtableStub(true, vtable_index);
+  ResourceMark rm;
+  CodeBuffer cb(s->entry_point(), sparc_code_length);
+  MacroAssembler* masm = new MacroAssembler(&cb);
+
+#ifndef PRODUCT
+  if (CountCompiledCalls) {
+    Address ctr(G5, SharedRuntime::nof_megamorphic_calls_addr());
+    __ sethi(ctr);
+    __ ld(ctr, G3_scratch);
+    __ inc(G3_scratch);
+    __ st(G3_scratch, ctr);
+  }
+#endif /* PRODUCT */
+
+  assert(VtableStub::receiver_location() == O0->as_VMReg(), "receiver expected in O0");
+
+  // get receiver klass
+  address npe_addr = __ pc();
+  __ ld_ptr(O0, oopDesc::klass_offset_in_bytes(), G3_scratch);
+
+  // set methodOop (in case of interpreted method), and destination address
+  int entry_offset = instanceKlass::vtable_start_offset() + vtable_index*vtableEntry::size();
+#ifndef PRODUCT
+  if (DebugVtables) {
+    Label L;
+    // check offset vs vtable length
+    __ ld(G3_scratch, instanceKlass::vtable_length_offset()*wordSize, G5);
+    __ cmp(G5, vtable_index*vtableEntry::size());
+    __ br(Assembler::greaterUnsigned, false, Assembler::pt, L);
+    __ delayed()->nop();
+    __ set(vtable_index, O2);
+    __ call_VM(noreg, CAST_FROM_FN_PTR(address, bad_compiled_vtable_index), O0, O2);
+    __ bind(L);
+  }
+#endif
+  int v_off = entry_offset*wordSize + vtableEntry::method_offset_in_bytes();
+  if( __ is_simm13(v_off) ) {
+    __ ld_ptr(G3, v_off, G5_method);
+  } else {
+    __ set(v_off,G5);
+    __ ld_ptr(G3, G5, G5_method);
+  }
+
+#ifndef PRODUCT
+  if (DebugVtables) {
+    Label L;
+    __ br_notnull(G5_method, false, Assembler::pt, L);
+    __ delayed()->nop();
+    __ stop("Vtable entry is ZERO");
+    __ bind(L);
+  }
+#endif
+
+  address ame_addr = __ pc();  // if the vtable entry is null, the method is abstract
+                               // NOTE: for vtable dispatches, the vtable entry will never be null.
+
+  __ ld_ptr(G5_method, in_bytes(methodOopDesc::from_compiled_offset()), G3_scratch);
+
+  // jump to target (either compiled code or c2iadapter)
+  __ JMP(G3_scratch, 0);
+  // load methodOop (in case we call c2iadapter)
+  __ delayed()->nop();
+
+  masm->flush();
+  s->set_exception_points(npe_addr, ame_addr);
+  return s;
+}
+
+
+// NOTE:  %%%% if any change is made to this stub make sure that the function
+//             pd_code_size_limit is changed to ensure the correct size for VtableStub
+VtableStub* VtableStubs::create_itable_stub(int vtable_index) {
+  const int sparc_code_length = VtableStub::pd_code_size_limit(false);
+  VtableStub* s = new(sparc_code_length) VtableStub(false, vtable_index);
+  ResourceMark rm;
+  CodeBuffer cb(s->entry_point(), sparc_code_length);
+  MacroAssembler* masm = new MacroAssembler(&cb);
+
+  Register G3_klassOop = G3_scratch;
+  Register G5_interface = G5;  // Passed in as an argument
+  Label search;
+
+  // Entry arguments:
+  //  G5_interface: Interface
+  //  O0:           Receiver
+  assert(VtableStub::receiver_location() == O0->as_VMReg(), "receiver expected in O0");
+
+  // get receiver klass (also an implicit null-check)
+  address npe_addr = __ pc();
+  __ ld_ptr(O0, oopDesc::klass_offset_in_bytes(), G3_klassOop);
+  __ verify_oop(G3_klassOop);
+
+  // Push a new window to get some temp registers.  This chops the head of all
+  // my 64-bit %o registers in the LION build, but this is OK because no longs
+  // are passed in the %o registers.  Instead, longs are passed in G1 and G4
+  // and so those registers are not available here.
+  __ save(SP,-frame::register_save_words*wordSize,SP);
+  Register I0_receiver = I0;    // Location of receiver after save
+
+#ifndef PRODUCT
+  if (CountCompiledCalls) {
+    Address ctr(L0, SharedRuntime::nof_megamorphic_calls_addr());
+    __ sethi(ctr);
+    __ ld(ctr, L1);
+    __ inc(L1);
+    __ st(L1, ctr);
+  }
+#endif /* PRODUCT */
+
+  // load start of itable entries into L0 register
+  const int base = instanceKlass::vtable_start_offset() * wordSize;
+  __ ld(Address(G3_klassOop, 0, instanceKlass::vtable_length_offset() * wordSize), L0);
+
+  // %%% Could store the aligned, prescaled offset in the klassoop.
+  __ sll(L0, exact_log2(vtableEntry::size() * wordSize), L0);
+  // see code for instanceKlass::start_of_itable!
+  const int vtable_alignment = align_object_offset(1);
+  assert(vtable_alignment == 1 || vtable_alignment == 2, "");
+  const int odd_bit = vtableEntry::size() * wordSize;
+  if (vtable_alignment == 2) {
+    __ and3(L0, odd_bit, L1);   // isolate the odd bit
+  }
+  __ add(G3_klassOop, L0, L0);
+  if (vtable_alignment == 2) {
+    __ add(L0, L1, L0);         // double the odd bit, to align up
+  }
+
+  // Loop over all itable entries until desired interfaceOop (G5_interface) found
+  __ bind(search);
+
+  // %%%% Could load both offset and interface in one ldx, if they were
+  // in the opposite order.  This would save a load.
+  __ ld_ptr(L0, base + itableOffsetEntry::interface_offset_in_bytes(), L1);
+#ifdef ASSERT
+  Label ok;
+  // Check that entry is non-null and an Oop
+  __ bpr(Assembler::rc_nz, false, Assembler::pt, L1, ok);
+  __ delayed()->nop();
+  __ stop("null entry point found in itable's offset table");
+  __ bind(ok);
+  __ verify_oop(L1);
+#endif // ASSERT
+
+  __ cmp(G5_interface, L1);
+  __ brx(Assembler::notEqual, true, Assembler::pn, search);
+  __ delayed()->add(L0, itableOffsetEntry::size() * wordSize, L0);
+
+  // entry found and L0 points to it, move offset of vtable for interface into L0
+  __ ld(L0, base + itableOffsetEntry::offset_offset_in_bytes(), L0);
+
+  // Compute itableMethodEntry and get methodOop(G5_method) and entrypoint(L0) for compiler
+  const int method_offset = (itableMethodEntry::size() * wordSize * vtable_index) + itableMethodEntry::method_offset_in_bytes();
+  __ add(G3_klassOop, L0, L1);
+  __ ld_ptr(L1, method_offset, G5_method);
+
+#ifndef PRODUCT
+  if (DebugVtables) {
+    Label L01;
+    __ ld_ptr(L1, method_offset, G5_method);
+    __ bpr(Assembler::rc_nz, false, Assembler::pt, G5_method, L01);
+    __ delayed()->nop();
+    __ stop("methodOop is null");
+    __ bind(L01);
+    __ verify_oop(G5_method);
+  }
+#endif
+
+  // If the following load is through a NULL pointer, we'll take an OS
+  // exception that should translate into an AbstractMethodError.  We need the
+  // window count to be correct at that time.
+  __ restore();                 // Restore registers BEFORE the AME point
+
+  address ame_addr = __ pc();   // if the vtable entry is null, the method is abstract
+  __ ld_ptr(G5_method, in_bytes(methodOopDesc::from_compiled_offset()), G3_scratch);
+
+  // G5_method:  methodOop
+  // O0:         Receiver
+  // G3_scratch: entry point
+  __ JMP(G3_scratch, 0);
+  __ delayed()->nop();
+
+  masm->flush();
+  s->set_exception_points(npe_addr, ame_addr);
+  return s;
+}
+
+
+int VtableStub::pd_code_size_limit(bool is_vtable_stub) {
+  if (TraceJumps || DebugVtables || CountCompiledCalls || VerifyOops) return 999;
+  else {
+    const int slop = 2*BytesPerInstWord; // sethi;add  (needed for long offsets)
+    if (is_vtable_stub) {
+      const int basic = 5*BytesPerInstWord; // ld;ld;ld,jmp,nop
+      return basic + slop;
+    } else {
+#ifdef ASSERT
+      return 999;
+#endif // ASSERT
+      const int basic = 17*BytesPerInstWord; // save, ld, ld, sll, and, add, add, ld, cmp, br, add, ld, add, ld, ld, jmp, restore
+      return (basic + slop);
+    }
+  }
+}
+
+
+int VtableStub::pd_code_alignment() {
+  // UltraSPARC cache line size is 8 instructions:
+  const unsigned int icache_line_size = 32;
+  return icache_line_size;
+}
+
+
+//Reconciliation History
+// 1.2 97/12/09 17:13:31 vtableStubs_i486.cpp
+// 1.4 98/01/21 19:18:37 vtableStubs_i486.cpp
+// 1.5 98/02/13 16:33:55 vtableStubs_i486.cpp
+// 1.7 98/03/05 17:17:28 vtableStubs_i486.cpp
+// 1.9 98/05/18 09:26:17 vtableStubs_i486.cpp
+// 1.10 98/05/26 16:28:13 vtableStubs_i486.cpp
+// 1.11 98/05/27 08:51:35 vtableStubs_i486.cpp
+// 1.12 98/06/15 15:04:12 vtableStubs_i486.cpp
+// 1.13 98/07/28 18:44:22 vtableStubs_i486.cpp
+// 1.15 98/08/28 11:31:19 vtableStubs_i486.cpp
+// 1.16 98/09/02 12:58:31 vtableStubs_i486.cpp
+// 1.17 98/09/04 12:15:52 vtableStubs_i486.cpp
+// 1.18 98/11/19 11:55:24 vtableStubs_i486.cpp
+// 1.19 99/01/12 14:57:56 vtableStubs_i486.cpp
+// 1.20 99/01/19 17:42:52 vtableStubs_i486.cpp
+// 1.22 99/01/21 10:29:25 vtableStubs_i486.cpp
+// 1.30 99/06/02 15:27:39 vtableStubs_i486.cpp
+// 1.26 99/06/24 14:25:07 vtableStubs_i486.cpp
+// 1.23 99/02/22 14:37:52 vtableStubs_i486.cpp
+// 1.28 99/06/29 18:06:17 vtableStubs_i486.cpp
+// 1.29 99/07/22 17:03:44 vtableStubs_i486.cpp
+// 1.30 99/08/11 09:33:27 vtableStubs_i486.cpp
+//End