Mercurial > hg > graal-compiler
diff src/cpu/x86/vm/stubGenerator_x86_64.cpp @ 0:a61af66fc99e jdk7-b24
Initial load
author | duke |
---|---|
date | Sat, 01 Dec 2007 00:00:00 +0000 |
parents | |
children | f8236e79048a |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/cpu/x86/vm/stubGenerator_x86_64.cpp Sat Dec 01 00:00:00 2007 +0000 @@ -0,0 +1,2907 @@ +/* + * Copyright 2003-2007 Sun Microsystems, Inc. All Rights Reserved. + * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. + * + * This code is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 only, as + * published by the Free Software Foundation. + * + * This code is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * version 2 for more details (a copy is included in the LICENSE file that + * accompanied this code). + * + * You should have received a copy of the GNU General Public License version + * 2 along with this work; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, + * CA 95054 USA or visit www.sun.com if you need additional information or + * have any questions. + * + */ + +#include "incls/_precompiled.incl" +#include "incls/_stubGenerator_x86_64.cpp.incl" + +// Declaration and definition of StubGenerator (no .hpp file). +// For a more detailed description of the stub routine structure +// see the comment in stubRoutines.hpp + +#define __ _masm-> + +#ifdef PRODUCT +#define BLOCK_COMMENT(str) /* nothing */ +#else +#define BLOCK_COMMENT(str) __ block_comment(str) +#endif + +#define BIND(label) bind(label); BLOCK_COMMENT(#label ":") +const int MXCSR_MASK = 0xFFC0; // Mask out any pending exceptions + +// Stub Code definitions + +static address handle_unsafe_access() { + JavaThread* thread = JavaThread::current(); + address pc = thread->saved_exception_pc(); + // pc is the instruction which we must emulate + // doing a no-op is fine: return garbage from the load + // therefore, compute npc + address npc = Assembler::locate_next_instruction(pc); + + // request an async exception + thread->set_pending_unsafe_access_error(); + + // return address of next instruction to execute + return npc; +} + +class StubGenerator: public StubCodeGenerator { + private: + +#ifdef PRODUCT +#define inc_counter_np(counter) (0) +#else + void inc_counter_np_(int& counter) { + __ incrementl(ExternalAddress((address)&counter)); + } +#define inc_counter_np(counter) \ + BLOCK_COMMENT("inc_counter " #counter); \ + inc_counter_np_(counter); +#endif + + // Call stubs are used to call Java from C + // + // Linux Arguments: + // c_rarg0: call wrapper address address + // c_rarg1: result address + // c_rarg2: result type BasicType + // c_rarg3: method methodOop + // c_rarg4: (interpreter) entry point address + // c_rarg5: parameters intptr_t* + // 16(rbp): parameter size (in words) int + // 24(rbp): thread Thread* + // + // [ return_from_Java ] <--- rsp + // [ argument word n ] + // ... + // -12 [ argument word 1 ] + // -11 [ saved r15 ] <--- rsp_after_call + // -10 [ saved r14 ] + // -9 [ saved r13 ] + // -8 [ saved r12 ] + // -7 [ saved rbx ] + // -6 [ call wrapper ] + // -5 [ result ] + // -4 [ result type ] + // -3 [ method ] + // -2 [ entry point ] + // -1 [ parameters ] + // 0 [ saved rbp ] <--- rbp + // 1 [ return address ] + // 2 [ parameter size ] + // 3 [ thread ] + // + // Windows Arguments: + // c_rarg0: call wrapper address address + // c_rarg1: result address + // c_rarg2: result type BasicType + // c_rarg3: method methodOop + // 48(rbp): (interpreter) entry point address + // 56(rbp): parameters intptr_t* + // 64(rbp): parameter size (in words) int + // 72(rbp): thread Thread* + // + // [ return_from_Java ] <--- rsp + // [ argument word n ] + // ... + // -8 [ argument word 1 ] + // -7 [ saved r15 ] <--- rsp_after_call + // -6 [ saved r14 ] + // -5 [ saved r13 ] + // -4 [ saved r12 ] + // -3 [ saved rdi ] + // -2 [ saved rsi ] + // -1 [ saved rbx ] + // 0 [ saved rbp ] <--- rbp + // 1 [ return address ] + // 2 [ call wrapper ] + // 3 [ result ] + // 4 [ result type ] + // 5 [ method ] + // 6 [ entry point ] + // 7 [ parameters ] + // 8 [ parameter size ] + // 9 [ thread ] + // + // Windows reserves the callers stack space for arguments 1-4. + // We spill c_rarg0-c_rarg3 to this space. + + // Call stub stack layout word offsets from rbp + enum call_stub_layout { +#ifdef _WIN64 + rsp_after_call_off = -7, + r15_off = rsp_after_call_off, + r14_off = -6, + r13_off = -5, + r12_off = -4, + rdi_off = -3, + rsi_off = -2, + rbx_off = -1, + rbp_off = 0, + retaddr_off = 1, + call_wrapper_off = 2, + result_off = 3, + result_type_off = 4, + method_off = 5, + entry_point_off = 6, + parameters_off = 7, + parameter_size_off = 8, + thread_off = 9 +#else + rsp_after_call_off = -12, + mxcsr_off = rsp_after_call_off, + r15_off = -11, + r14_off = -10, + r13_off = -9, + r12_off = -8, + rbx_off = -7, + call_wrapper_off = -6, + result_off = -5, + result_type_off = -4, + method_off = -3, + entry_point_off = -2, + parameters_off = -1, + rbp_off = 0, + retaddr_off = 1, + parameter_size_off = 2, + thread_off = 3 +#endif + }; + + address generate_call_stub(address& return_address) { + assert((int)frame::entry_frame_after_call_words == -(int)rsp_after_call_off + 1 && + (int)frame::entry_frame_call_wrapper_offset == (int)call_wrapper_off, + "adjust this code"); + StubCodeMark mark(this, "StubRoutines", "call_stub"); + address start = __ pc(); + + // same as in generate_catch_exception()! + const Address rsp_after_call(rbp, rsp_after_call_off * wordSize); + + const Address call_wrapper (rbp, call_wrapper_off * wordSize); + const Address result (rbp, result_off * wordSize); + const Address result_type (rbp, result_type_off * wordSize); + const Address method (rbp, method_off * wordSize); + const Address entry_point (rbp, entry_point_off * wordSize); + const Address parameters (rbp, parameters_off * wordSize); + const Address parameter_size(rbp, parameter_size_off * wordSize); + + // same as in generate_catch_exception()! + const Address thread (rbp, thread_off * wordSize); + + const Address r15_save(rbp, r15_off * wordSize); + const Address r14_save(rbp, r14_off * wordSize); + const Address r13_save(rbp, r13_off * wordSize); + const Address r12_save(rbp, r12_off * wordSize); + const Address rbx_save(rbp, rbx_off * wordSize); + + // stub code + __ enter(); + __ subq(rsp, -rsp_after_call_off * wordSize); + + // save register parameters +#ifndef _WIN64 + __ movq(parameters, c_rarg5); // parameters + __ movq(entry_point, c_rarg4); // entry_point +#endif + + __ movq(method, c_rarg3); // method + __ movl(result_type, c_rarg2); // result type + __ movq(result, c_rarg1); // result + __ movq(call_wrapper, c_rarg0); // call wrapper + + // save regs belonging to calling function + __ movq(rbx_save, rbx); + __ movq(r12_save, r12); + __ movq(r13_save, r13); + __ movq(r14_save, r14); + __ movq(r15_save, r15); + +#ifdef _WIN64 + const Address rdi_save(rbp, rdi_off * wordSize); + const Address rsi_save(rbp, rsi_off * wordSize); + + __ movq(rsi_save, rsi); + __ movq(rdi_save, rdi); +#else + const Address mxcsr_save(rbp, mxcsr_off * wordSize); + { + Label skip_ldmx; + __ stmxcsr(mxcsr_save); + __ movl(rax, mxcsr_save); + __ andl(rax, MXCSR_MASK); // Only check control and mask bits + ExternalAddress mxcsr_std(StubRoutines::amd64::mxcsr_std()); + __ cmp32(rax, mxcsr_std); + __ jcc(Assembler::equal, skip_ldmx); + __ ldmxcsr(mxcsr_std); + __ bind(skip_ldmx); + } +#endif + + // Load up thread register + __ movq(r15_thread, thread); + +#ifdef ASSERT + // make sure we have no pending exceptions + { + Label L; + __ cmpq(Address(r15_thread, Thread::pending_exception_offset()), (int)NULL_WORD); + __ jcc(Assembler::equal, L); + __ stop("StubRoutines::call_stub: entered with pending exception"); + __ bind(L); + } +#endif + + // pass parameters if any + BLOCK_COMMENT("pass parameters if any"); + Label parameters_done; + __ movl(c_rarg3, parameter_size); + __ testl(c_rarg3, c_rarg3); + __ jcc(Assembler::zero, parameters_done); + + Label loop; + __ movq(c_rarg2, parameters); // parameter pointer + __ movl(c_rarg1, c_rarg3); // parameter counter is in c_rarg1 + __ BIND(loop); + if (TaggedStackInterpreter) { + __ movq(rax, Address(c_rarg2, 0)); // get tag + __ addq(c_rarg2, wordSize); // advance to next tag + __ pushq(rax); // pass tag + } + __ movq(rax, Address(c_rarg2, 0)); // get parameter + __ addq(c_rarg2, wordSize); // advance to next parameter + __ decrementl(c_rarg1); // decrement counter + __ pushq(rax); // pass parameter + __ jcc(Assembler::notZero, loop); + + // call Java function + __ BIND(parameters_done); + __ movq(rbx, method); // get methodOop + __ movq(c_rarg1, entry_point); // get entry_point + __ movq(r13, rsp); // set sender sp + BLOCK_COMMENT("call Java function"); + __ call(c_rarg1); + + BLOCK_COMMENT("call_stub_return_address:"); + return_address = __ pc(); + + // store result depending on type (everything that is not + // T_OBJECT, T_LONG, T_FLOAT or T_DOUBLE is treated as T_INT) + __ movq(c_rarg0, result); + Label is_long, is_float, is_double, exit; + __ movl(c_rarg1, result_type); + __ cmpl(c_rarg1, T_OBJECT); + __ jcc(Assembler::equal, is_long); + __ cmpl(c_rarg1, T_LONG); + __ jcc(Assembler::equal, is_long); + __ cmpl(c_rarg1, T_FLOAT); + __ jcc(Assembler::equal, is_float); + __ cmpl(c_rarg1, T_DOUBLE); + __ jcc(Assembler::equal, is_double); + + // handle T_INT case + __ movl(Address(c_rarg0, 0), rax); + + __ BIND(exit); + + // pop parameters + __ leaq(rsp, rsp_after_call); + +#ifdef ASSERT + // verify that threads correspond + { + Label L, S; + __ cmpq(r15_thread, thread); + __ jcc(Assembler::notEqual, S); + __ get_thread(rbx); + __ cmpq(r15_thread, rbx); + __ jcc(Assembler::equal, L); + __ bind(S); + __ jcc(Assembler::equal, L); + __ stop("StubRoutines::call_stub: threads must correspond"); + __ bind(L); + } +#endif + + // restore regs belonging to calling function + __ movq(r15, r15_save); + __ movq(r14, r14_save); + __ movq(r13, r13_save); + __ movq(r12, r12_save); + __ movq(rbx, rbx_save); + +#ifdef _WIN64 + __ movq(rdi, rdi_save); + __ movq(rsi, rsi_save); +#else + __ ldmxcsr(mxcsr_save); +#endif + + // restore rsp + __ addq(rsp, -rsp_after_call_off * wordSize); + + // return + __ popq(rbp); + __ ret(0); + + // handle return types different from T_INT + __ BIND(is_long); + __ movq(Address(c_rarg0, 0), rax); + __ jmp(exit); + + __ BIND(is_float); + __ movflt(Address(c_rarg0, 0), xmm0); + __ jmp(exit); + + __ BIND(is_double); + __ movdbl(Address(c_rarg0, 0), xmm0); + __ jmp(exit); + + return start; + } + + // Return point for a Java call if there's an exception thrown in + // Java code. The exception is caught and transformed into a + // pending exception stored in JavaThread that can be tested from + // within the VM. + // + // Note: Usually the parameters are removed by the callee. In case + // of an exception crossing an activation frame boundary, that is + // not the case if the callee is compiled code => need to setup the + // rsp. + // + // rax: exception oop + + address generate_catch_exception() { + StubCodeMark mark(this, "StubRoutines", "catch_exception"); + address start = __ pc(); + + // same as in generate_call_stub(): + const Address rsp_after_call(rbp, rsp_after_call_off * wordSize); + const Address thread (rbp, thread_off * wordSize); + +#ifdef ASSERT + // verify that threads correspond + { + Label L, S; + __ cmpq(r15_thread, thread); + __ jcc(Assembler::notEqual, S); + __ get_thread(rbx); + __ cmpq(r15_thread, rbx); + __ jcc(Assembler::equal, L); + __ bind(S); + __ stop("StubRoutines::catch_exception: threads must correspond"); + __ bind(L); + } +#endif + + // set pending exception + __ verify_oop(rax); + + __ movq(Address(r15_thread, Thread::pending_exception_offset()), rax); + __ lea(rscratch1, ExternalAddress((address)__FILE__)); + __ movq(Address(r15_thread, Thread::exception_file_offset()), rscratch1); + __ movl(Address(r15_thread, Thread::exception_line_offset()), (int) __LINE__); + + // complete return to VM + assert(StubRoutines::_call_stub_return_address != NULL, + "_call_stub_return_address must have been generated before"); + __ jump(RuntimeAddress(StubRoutines::_call_stub_return_address)); + + return start; + } + + // Continuation point for runtime calls returning with a pending + // exception. The pending exception check happened in the runtime + // or native call stub. The pending exception in Thread is + // converted into a Java-level exception. + // + // Contract with Java-level exception handlers: + // rax: exception + // rdx: throwing pc + // + // NOTE: At entry of this stub, exception-pc must be on stack !! + + address generate_forward_exception() { + StubCodeMark mark(this, "StubRoutines", "forward exception"); + address start = __ pc(); + + // Upon entry, the sp points to the return address returning into + // Java (interpreted or compiled) code; i.e., the return address + // becomes the throwing pc. + // + // Arguments pushed before the runtime call are still on the stack + // but the exception handler will reset the stack pointer -> + // ignore them. A potential result in registers can be ignored as + // well. + +#ifdef ASSERT + // make sure this code is only executed if there is a pending exception + { + Label L; + __ cmpq(Address(r15_thread, Thread::pending_exception_offset()), (int) NULL); + __ jcc(Assembler::notEqual, L); + __ stop("StubRoutines::forward exception: no pending exception (1)"); + __ bind(L); + } +#endif + + // compute exception handler into rbx + __ movq(c_rarg0, Address(rsp, 0)); + BLOCK_COMMENT("call exception_handler_for_return_address"); + __ call_VM_leaf(CAST_FROM_FN_PTR(address, + SharedRuntime::exception_handler_for_return_address), + c_rarg0); + __ movq(rbx, rax); + + // setup rax & rdx, remove return address & clear pending exception + __ popq(rdx); + __ movq(rax, Address(r15_thread, Thread::pending_exception_offset())); + __ movptr(Address(r15_thread, Thread::pending_exception_offset()), (int)NULL_WORD); + +#ifdef ASSERT + // make sure exception is set + { + Label L; + __ testq(rax, rax); + __ jcc(Assembler::notEqual, L); + __ stop("StubRoutines::forward exception: no pending exception (2)"); + __ bind(L); + } +#endif + + // continue at exception handler (return address removed) + // rax: exception + // rbx: exception handler + // rdx: throwing pc + __ verify_oop(rax); + __ jmp(rbx); + + return start; + } + + // Support for jint atomic::xchg(jint exchange_value, volatile jint* dest) + // + // Arguments : + // c_rarg0: exchange_value + // c_rarg0: dest + // + // Result: + // *dest <- ex, return (orig *dest) + address generate_atomic_xchg() { + StubCodeMark mark(this, "StubRoutines", "atomic_xchg"); + address start = __ pc(); + + __ movl(rax, c_rarg0); // Copy to eax we need a return value anyhow + __ xchgl(rax, Address(c_rarg1, 0)); // automatic LOCK + __ ret(0); + + return start; + } + + // Support for intptr_t atomic::xchg_ptr(intptr_t exchange_value, volatile intptr_t* dest) + // + // Arguments : + // c_rarg0: exchange_value + // c_rarg1: dest + // + // Result: + // *dest <- ex, return (orig *dest) + address generate_atomic_xchg_ptr() { + StubCodeMark mark(this, "StubRoutines", "atomic_xchg_ptr"); + address start = __ pc(); + + __ movq(rax, c_rarg0); // Copy to eax we need a return value anyhow + __ xchgq(rax, Address(c_rarg1, 0)); // automatic LOCK + __ ret(0); + + return start; + } + + // Support for jint atomic::atomic_cmpxchg(jint exchange_value, volatile jint* dest, + // jint compare_value) + // + // Arguments : + // c_rarg0: exchange_value + // c_rarg1: dest + // c_rarg2: compare_value + // + // Result: + // if ( compare_value == *dest ) { + // *dest = exchange_value + // return compare_value; + // else + // return *dest; + address generate_atomic_cmpxchg() { + StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg"); + address start = __ pc(); + + __ movl(rax, c_rarg2); + if ( os::is_MP() ) __ lock(); + __ cmpxchgl(c_rarg0, Address(c_rarg1, 0)); + __ ret(0); + + return start; + } + + // Support for jint atomic::atomic_cmpxchg_long(jlong exchange_value, + // volatile jlong* dest, + // jlong compare_value) + // Arguments : + // c_rarg0: exchange_value + // c_rarg1: dest + // c_rarg2: compare_value + // + // Result: + // if ( compare_value == *dest ) { + // *dest = exchange_value + // return compare_value; + // else + // return *dest; + address generate_atomic_cmpxchg_long() { + StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg_long"); + address start = __ pc(); + + __ movq(rax, c_rarg2); + if ( os::is_MP() ) __ lock(); + __ cmpxchgq(c_rarg0, Address(c_rarg1, 0)); + __ ret(0); + + return start; + } + + // Support for jint atomic::add(jint add_value, volatile jint* dest) + // + // Arguments : + // c_rarg0: add_value + // c_rarg1: dest + // + // Result: + // *dest += add_value + // return *dest; + address generate_atomic_add() { + StubCodeMark mark(this, "StubRoutines", "atomic_add"); + address start = __ pc(); + + __ movl(rax, c_rarg0); + if ( os::is_MP() ) __ lock(); + __ xaddl(Address(c_rarg1, 0), c_rarg0); + __ addl(rax, c_rarg0); + __ ret(0); + + return start; + } + + // Support for intptr_t atomic::add_ptr(intptr_t add_value, volatile intptr_t* dest) + // + // Arguments : + // c_rarg0: add_value + // c_rarg1: dest + // + // Result: + // *dest += add_value + // return *dest; + address generate_atomic_add_ptr() { + StubCodeMark mark(this, "StubRoutines", "atomic_add_ptr"); + address start = __ pc(); + + __ movq(rax, c_rarg0); // Copy to eax we need a return value anyhow + if ( os::is_MP() ) __ lock(); + __ xaddl(Address(c_rarg1, 0), c_rarg0); + __ addl(rax, c_rarg0); + __ ret(0); + + return start; + } + + // Support for intptr_t OrderAccess::fence() + // + // Arguments : + // + // Result: + address generate_orderaccess_fence() { + StubCodeMark mark(this, "StubRoutines", "orderaccess_fence"); + address start = __ pc(); + __ mfence(); + __ ret(0); + + return start; + } + + // Support for intptr_t get_previous_fp() + // + // This routine is used to find the previous frame pointer for the + // caller (current_frame_guess). This is used as part of debugging + // ps() is seemingly lost trying to find frames. + // This code assumes that caller current_frame_guess) has a frame. + address generate_get_previous_fp() { + StubCodeMark mark(this, "StubRoutines", "get_previous_fp"); + const Address old_fp(rbp, 0); + const Address older_fp(rax, 0); + address start = __ pc(); + + __ enter(); + __ movq(rax, old_fp); // callers fp + __ movq(rax, older_fp); // the frame for ps() + __ popq(rbp); + __ ret(0); + + return start; + } + + //---------------------------------------------------------------------------------------------------- + // Support for void verify_mxcsr() + // + // This routine is used with -Xcheck:jni to verify that native + // JNI code does not return to Java code without restoring the + // MXCSR register to our expected state. + + address generate_verify_mxcsr() { + StubCodeMark mark(this, "StubRoutines", "verify_mxcsr"); + address start = __ pc(); + + const Address mxcsr_save(rsp, 0); + + if (CheckJNICalls) { + Label ok_ret; + __ pushq(rax); + __ subq(rsp, wordSize); // allocate a temp location + __ stmxcsr(mxcsr_save); + __ movl(rax, mxcsr_save); + __ andl(rax, MXCSR_MASK); // Only check control and mask bits + __ cmpl(rax, *(int *)(StubRoutines::amd64::mxcsr_std())); + __ jcc(Assembler::equal, ok_ret); + + __ warn("MXCSR changed by native JNI code, use -XX:+RestoreMXCSROnJNICall"); + + __ ldmxcsr(ExternalAddress(StubRoutines::amd64::mxcsr_std())); + + __ bind(ok_ret); + __ addq(rsp, wordSize); + __ popq(rax); + } + + __ ret(0); + + return start; + } + + address generate_f2i_fixup() { + StubCodeMark mark(this, "StubRoutines", "f2i_fixup"); + Address inout(rsp, 5 * wordSize); // return address + 4 saves + + address start = __ pc(); + + Label L; + + __ pushq(rax); + __ pushq(c_rarg3); + __ pushq(c_rarg2); + __ pushq(c_rarg1); + + __ movl(rax, 0x7f800000); + __ xorl(c_rarg3, c_rarg3); + __ movl(c_rarg2, inout); + __ movl(c_rarg1, c_rarg2); + __ andl(c_rarg1, 0x7fffffff); + __ cmpl(rax, c_rarg1); // NaN? -> 0 + __ jcc(Assembler::negative, L); + __ testl(c_rarg2, c_rarg2); // signed ? min_jint : max_jint + __ movl(c_rarg3, 0x80000000); + __ movl(rax, 0x7fffffff); + __ cmovl(Assembler::positive, c_rarg3, rax); + + __ bind(L); + __ movq(inout, c_rarg3); + + __ popq(c_rarg1); + __ popq(c_rarg2); + __ popq(c_rarg3); + __ popq(rax); + + __ ret(0); + + return start; + } + + address generate_f2l_fixup() { + StubCodeMark mark(this, "StubRoutines", "f2l_fixup"); + Address inout(rsp, 5 * wordSize); // return address + 4 saves + address start = __ pc(); + + Label L; + + __ pushq(rax); + __ pushq(c_rarg3); + __ pushq(c_rarg2); + __ pushq(c_rarg1); + + __ movl(rax, 0x7f800000); + __ xorl(c_rarg3, c_rarg3); + __ movl(c_rarg2, inout); + __ movl(c_rarg1, c_rarg2); + __ andl(c_rarg1, 0x7fffffff); + __ cmpl(rax, c_rarg1); // NaN? -> 0 + __ jcc(Assembler::negative, L); + __ testl(c_rarg2, c_rarg2); // signed ? min_jlong : max_jlong + __ mov64(c_rarg3, 0x8000000000000000); + __ mov64(rax, 0x7fffffffffffffff); + __ cmovq(Assembler::positive, c_rarg3, rax); + + __ bind(L); + __ movq(inout, c_rarg3); + + __ popq(c_rarg1); + __ popq(c_rarg2); + __ popq(c_rarg3); + __ popq(rax); + + __ ret(0); + + return start; + } + + address generate_d2i_fixup() { + StubCodeMark mark(this, "StubRoutines", "d2i_fixup"); + Address inout(rsp, 6 * wordSize); // return address + 5 saves + + address start = __ pc(); + + Label L; + + __ pushq(rax); + __ pushq(c_rarg3); + __ pushq(c_rarg2); + __ pushq(c_rarg1); + __ pushq(c_rarg0); + + __ movl(rax, 0x7ff00000); + __ movq(c_rarg2, inout); + __ movl(c_rarg3, c_rarg2); + __ movq(c_rarg1, c_rarg2); + __ movq(c_rarg0, c_rarg2); + __ negl(c_rarg3); + __ shrq(c_rarg1, 0x20); + __ orl(c_rarg3, c_rarg2); + __ andl(c_rarg1, 0x7fffffff); + __ xorl(c_rarg2, c_rarg2); + __ shrl(c_rarg3, 0x1f); + __ orl(c_rarg1, c_rarg3); + __ cmpl(rax, c_rarg1); + __ jcc(Assembler::negative, L); // NaN -> 0 + __ testq(c_rarg0, c_rarg0); // signed ? min_jint : max_jint + __ movl(c_rarg2, 0x80000000); + __ movl(rax, 0x7fffffff); + __ cmovl(Assembler::positive, c_rarg2, rax); + + __ bind(L); + __ movq(inout, c_rarg2); + + __ popq(c_rarg0); + __ popq(c_rarg1); + __ popq(c_rarg2); + __ popq(c_rarg3); + __ popq(rax); + + __ ret(0); + + return start; + } + + address generate_d2l_fixup() { + StubCodeMark mark(this, "StubRoutines", "d2l_fixup"); + Address inout(rsp, 6 * wordSize); // return address + 5 saves + + address start = __ pc(); + + Label L; + + __ pushq(rax); + __ pushq(c_rarg3); + __ pushq(c_rarg2); + __ pushq(c_rarg1); + __ pushq(c_rarg0); + + __ movl(rax, 0x7ff00000); + __ movq(c_rarg2, inout); + __ movl(c_rarg3, c_rarg2); + __ movq(c_rarg1, c_rarg2); + __ movq(c_rarg0, c_rarg2); + __ negl(c_rarg3); + __ shrq(c_rarg1, 0x20); + __ orl(c_rarg3, c_rarg2); + __ andl(c_rarg1, 0x7fffffff); + __ xorl(c_rarg2, c_rarg2); + __ shrl(c_rarg3, 0x1f); + __ orl(c_rarg1, c_rarg3); + __ cmpl(rax, c_rarg1); + __ jcc(Assembler::negative, L); // NaN -> 0 + __ testq(c_rarg0, c_rarg0); // signed ? min_jlong : max_jlong + __ mov64(c_rarg2, 0x8000000000000000); + __ mov64(rax, 0x7fffffffffffffff); + __ cmovq(Assembler::positive, c_rarg2, rax); + + __ bind(L); + __ movq(inout, c_rarg2); + + __ popq(c_rarg0); + __ popq(c_rarg1); + __ popq(c_rarg2); + __ popq(c_rarg3); + __ popq(rax); + + __ ret(0); + + return start; + } + + address generate_fp_mask(const char *stub_name, int64_t mask) { + StubCodeMark mark(this, "StubRoutines", stub_name); + + __ align(16); + address start = __ pc(); + + __ emit_data64( mask, relocInfo::none ); + __ emit_data64( mask, relocInfo::none ); + + return start; + } + + // The following routine generates a subroutine to throw an + // asynchronous UnknownError when an unsafe access gets a fault that + // could not be reasonably prevented by the programmer. (Example: + // SIGBUS/OBJERR.) + address generate_handler_for_unsafe_access() { + StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access"); + address start = __ pc(); + + __ pushq(0); // hole for return address-to-be + __ pushaq(); // push registers + Address next_pc(rsp, RegisterImpl::number_of_registers * BytesPerWord); + + __ subq(rsp, frame::arg_reg_save_area_bytes); + BLOCK_COMMENT("call handle_unsafe_access"); + __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, handle_unsafe_access))); + __ addq(rsp, frame::arg_reg_save_area_bytes); + + __ movq(next_pc, rax); // stuff next address + __ popaq(); + __ ret(0); // jump to next address + + return start; + } + + // Non-destructive plausibility checks for oops + // + // Arguments: + // all args on stack! + // + // Stack after saving c_rarg3: + // [tos + 0]: saved c_rarg3 + // [tos + 1]: saved c_rarg2 + // [tos + 2]: saved flags + // [tos + 3]: return address + // * [tos + 4]: error message (char*) + // * [tos + 5]: object to verify (oop) + // * [tos + 6]: saved rax - saved by caller and bashed + // * = popped on exit + address generate_verify_oop() { + StubCodeMark mark(this, "StubRoutines", "verify_oop"); + address start = __ pc(); + + Label exit, error; + + __ pushfq(); + __ incrementl(ExternalAddress((address) StubRoutines::verify_oop_count_addr())); + + // save c_rarg2 and c_rarg3 + __ pushq(c_rarg2); + __ pushq(c_rarg3); + + // get object + __ movq(rax, Address(rsp, 5 * wordSize)); + + // make sure object is 'reasonable' + __ testq(rax, rax); + __ jcc(Assembler::zero, exit); // if obj is NULL it is OK + // Check if the oop is in the right area of memory + __ movq(c_rarg2, rax); + __ movptr(c_rarg3, (int64_t) Universe::verify_oop_mask()); + __ andq(c_rarg2, c_rarg3); + __ movptr(c_rarg3, (int64_t) Universe::verify_oop_bits()); + __ cmpq(c_rarg2, c_rarg3); + __ jcc(Assembler::notZero, error); + + // make sure klass is 'reasonable' + __ movq(rax, Address(rax, oopDesc::klass_offset_in_bytes())); // get klass + __ testq(rax, rax); + __ jcc(Assembler::zero, error); // if klass is NULL it is broken + // Check if the klass is in the right area of memory + __ movq(c_rarg2, rax); + __ movptr(c_rarg3, (int64_t) Universe::verify_klass_mask()); + __ andq(c_rarg2, c_rarg3); + __ movptr(c_rarg3, (int64_t) Universe::verify_klass_bits()); + __ cmpq(c_rarg2, c_rarg3); + __ jcc(Assembler::notZero, error); + + // make sure klass' klass is 'reasonable' + __ movq(rax, Address(rax, oopDesc::klass_offset_in_bytes())); + __ testq(rax, rax); + __ jcc(Assembler::zero, error); // if klass' klass is NULL it is broken + // Check if the klass' klass is in the right area of memory + __ movptr(c_rarg3, (int64_t) Universe::verify_klass_mask()); + __ andq(rax, c_rarg3); + __ movptr(c_rarg3, (int64_t) Universe::verify_klass_bits()); + __ cmpq(rax, c_rarg3); + __ jcc(Assembler::notZero, error); + + // return if everything seems ok + __ bind(exit); + __ movq(rax, Address(rsp, 6 * wordSize)); // get saved rax back + __ popq(c_rarg3); // restore c_rarg3 + __ popq(c_rarg2); // restore c_rarg2 + __ popfq(); // restore flags + __ ret(3 * wordSize); // pop caller saved stuff + + // handle errors + __ bind(error); + __ movq(rax, Address(rsp, 6 * wordSize)); // get saved rax back + __ popq(c_rarg3); // get saved c_rarg3 back + __ popq(c_rarg2); // get saved c_rarg2 back + __ popfq(); // get saved flags off stack -- + // will be ignored + + __ pushaq(); // push registers + // (rip is already + // already pushed) + // debug(char* msg, int64_t regs[]) + // We've popped the registers we'd saved (c_rarg3, c_rarg2 and flags), and + // pushed all the registers, so now the stack looks like: + // [tos + 0] 16 saved registers + // [tos + 16] return address + // [tos + 17] error message (char*) + + __ movq(c_rarg0, Address(rsp, 17 * wordSize)); // pass address of error message + __ movq(c_rarg1, rsp); // pass address of regs on stack + __ movq(r12, rsp); // remember rsp + __ subq(rsp, frame::arg_reg_save_area_bytes);// windows + __ andq(rsp, -16); // align stack as required by ABI + BLOCK_COMMENT("call MacroAssembler::debug"); + __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, MacroAssembler::debug))); + __ movq(rsp, r12); // restore rsp + __ popaq(); // pop registers + __ ret(3 * wordSize); // pop caller saved stuff + + return start; + } + + static address disjoint_byte_copy_entry; + static address disjoint_short_copy_entry; + static address disjoint_int_copy_entry; + static address disjoint_long_copy_entry; + static address disjoint_oop_copy_entry; + + static address byte_copy_entry; + static address short_copy_entry; + static address int_copy_entry; + static address long_copy_entry; + static address oop_copy_entry; + + static address checkcast_copy_entry; + + // + // Verify that a register contains clean 32-bits positive value + // (high 32-bits are 0) so it could be used in 64-bits shifts. + // + // Input: + // Rint - 32-bits value + // Rtmp - scratch + // + void assert_clean_int(Register Rint, Register Rtmp) { +#ifdef ASSERT + Label L; + assert_different_registers(Rtmp, Rint); + __ movslq(Rtmp, Rint); + __ cmpq(Rtmp, Rint); + __ jccb(Assembler::equal, L); + __ stop("high 32-bits of int value are not 0"); + __ bind(L); +#endif + } + + // Generate overlap test for array copy stubs + // + // Input: + // c_rarg0 - from + // c_rarg1 - to + // c_rarg2 - element count + // + // Output: + // rax - &from[element count - 1] + // + void array_overlap_test(address no_overlap_target, Address::ScaleFactor sf) { + assert(no_overlap_target != NULL, "must be generated"); + array_overlap_test(no_overlap_target, NULL, sf); + } + void array_overlap_test(Label& L_no_overlap, Address::ScaleFactor sf) { + array_overlap_test(NULL, &L_no_overlap, sf); + } + void array_overlap_test(address no_overlap_target, Label* NOLp, Address::ScaleFactor sf) { + const Register from = c_rarg0; + const Register to = c_rarg1; + const Register count = c_rarg2; + const Register end_from = rax; + + __ cmpq(to, from); + __ leaq(end_from, Address(from, count, sf, 0)); + if (NOLp == NULL) { + ExternalAddress no_overlap(no_overlap_target); + __ jump_cc(Assembler::belowEqual, no_overlap); + __ cmpq(to, end_from); + __ jump_cc(Assembler::aboveEqual, no_overlap); + } else { + __ jcc(Assembler::belowEqual, (*NOLp)); + __ cmpq(to, end_from); + __ jcc(Assembler::aboveEqual, (*NOLp)); + } + } + + // Shuffle first three arg regs on Windows into Linux/Solaris locations. + // + // Outputs: + // rdi - rcx + // rsi - rdx + // rdx - r8 + // rcx - r9 + // + // Registers r9 and r10 are used to save rdi and rsi on Windows, which latter + // are non-volatile. r9 and r10 should not be used by the caller. + // + void setup_arg_regs(int nargs = 3) { + const Register saved_rdi = r9; + const Register saved_rsi = r10; + assert(nargs == 3 || nargs == 4, "else fix"); +#ifdef _WIN64 + assert(c_rarg0 == rcx && c_rarg1 == rdx && c_rarg2 == r8 && c_rarg3 == r9, + "unexpected argument registers"); + if (nargs >= 4) + __ movq(rax, r9); // r9 is also saved_rdi + __ movq(saved_rdi, rdi); + __ movq(saved_rsi, rsi); + __ movq(rdi, rcx); // c_rarg0 + __ movq(rsi, rdx); // c_rarg1 + __ movq(rdx, r8); // c_rarg2 + if (nargs >= 4) + __ movq(rcx, rax); // c_rarg3 (via rax) +#else + assert(c_rarg0 == rdi && c_rarg1 == rsi && c_rarg2 == rdx && c_rarg3 == rcx, + "unexpected argument registers"); +#endif + } + + void restore_arg_regs() { + const Register saved_rdi = r9; + const Register saved_rsi = r10; +#ifdef _WIN64 + __ movq(rdi, saved_rdi); + __ movq(rsi, saved_rsi); +#endif + } + + // Generate code for an array write pre barrier + // + // addr - starting address + // count - element count + // + // Destroy no registers! + // + void gen_write_ref_array_pre_barrier(Register addr, Register count) { +#if 0 // G1 - only + assert_different_registers(addr, c_rarg1); + assert_different_registers(count, c_rarg0); + BarrierSet* bs = Universe::heap()->barrier_set(); + switch (bs->kind()) { + case BarrierSet::G1SATBCT: + case BarrierSet::G1SATBCTLogging: + { + __ pushaq(); // push registers + __ movq(c_rarg0, addr); + __ movq(c_rarg1, count); + __ call(RuntimeAddress(BarrierSet::static_write_ref_array_pre)); + __ popaq(); + } + break; + case BarrierSet::CardTableModRef: + case BarrierSet::CardTableExtension: + case BarrierSet::ModRef: + break; + default : + ShouldNotReachHere(); + + } +#endif // 0 G1 - only + } + + // + // Generate code for an array write post barrier + // + // Input: + // start - register containing starting address of destination array + // end - register containing ending address of destination array + // scratch - scratch register + // + // The input registers are overwritten. + // The ending address is inclusive. + void gen_write_ref_array_post_barrier(Register start, Register end, Register scratch) { + assert_different_registers(start, end, scratch); + BarrierSet* bs = Universe::heap()->barrier_set(); + switch (bs->kind()) { +#if 0 // G1 - only + case BarrierSet::G1SATBCT: + case BarrierSet::G1SATBCTLogging: + + { + __ pushaq(); // push registers (overkill) + // must compute element count unless barrier set interface is changed (other platforms supply count) + assert_different_registers(start, end, scratch); + __ leaq(scratch, Address(end, wordSize)); + __ subq(scratch, start); + __ shrq(scratch, LogBytesPerWord); + __ movq(c_rarg0, start); + __ movq(c_rarg1, scratch); + __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post)); + __ popaq(); + } + break; +#endif // 0 G1 - only + case BarrierSet::CardTableModRef: + case BarrierSet::CardTableExtension: + { + CardTableModRefBS* ct = (CardTableModRefBS*)bs; + assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); + + Label L_loop; + + __ shrq(start, CardTableModRefBS::card_shift); + __ shrq(end, CardTableModRefBS::card_shift); + __ subq(end, start); // number of bytes to copy + + const Register count = end; // 'end' register contains bytes count now + __ lea(scratch, ExternalAddress((address)ct->byte_map_base)); + __ addq(start, scratch); + __ BIND(L_loop); + __ movb(Address(start, count, Address::times_1), 0); + __ decrementq(count); + __ jcc(Assembler::greaterEqual, L_loop); + } + } + } + + // Copy big chunks forward + // + // Inputs: + // end_from - source arrays end address + // end_to - destination array end address + // qword_count - 64-bits element count, negative + // to - scratch + // L_copy_32_bytes - entry label + // L_copy_8_bytes - exit label + // + void copy_32_bytes_forward(Register end_from, Register end_to, + Register qword_count, Register to, + Label& L_copy_32_bytes, Label& L_copy_8_bytes) { + DEBUG_ONLY(__ stop("enter at entry label, not here")); + Label L_loop; + __ align(16); + __ BIND(L_loop); + __ movq(to, Address(end_from, qword_count, Address::times_8, -24)); + __ movq(Address(end_to, qword_count, Address::times_8, -24), to); + __ movq(to, Address(end_from, qword_count, Address::times_8, -16)); + __ movq(Address(end_to, qword_count, Address::times_8, -16), to); + __ movq(to, Address(end_from, qword_count, Address::times_8, - 8)); + __ movq(Address(end_to, qword_count, Address::times_8, - 8), to); + __ movq(to, Address(end_from, qword_count, Address::times_8, - 0)); + __ movq(Address(end_to, qword_count, Address::times_8, - 0), to); + __ BIND(L_copy_32_bytes); + __ addq(qword_count, 4); + __ jcc(Assembler::lessEqual, L_loop); + __ subq(qword_count, 4); + __ jcc(Assembler::less, L_copy_8_bytes); // Copy trailing qwords + } + + + // Copy big chunks backward + // + // Inputs: + // from - source arrays address + // dest - destination array address + // qword_count - 64-bits element count + // to - scratch + // L_copy_32_bytes - entry label + // L_copy_8_bytes - exit label + // + void copy_32_bytes_backward(Register from, Register dest, + Register qword_count, Register to, + Label& L_copy_32_bytes, Label& L_copy_8_bytes) { + DEBUG_ONLY(__ stop("enter at entry label, not here")); + Label L_loop; + __ align(16); + __ BIND(L_loop); + __ movq(to, Address(from, qword_count, Address::times_8, 24)); + __ movq(Address(dest, qword_count, Address::times_8, 24), to); + __ movq(to, Address(from, qword_count, Address::times_8, 16)); + __ movq(Address(dest, qword_count, Address::times_8, 16), to); + __ movq(to, Address(from, qword_count, Address::times_8, 8)); + __ movq(Address(dest, qword_count, Address::times_8, 8), to); + __ movq(to, Address(from, qword_count, Address::times_8, 0)); + __ movq(Address(dest, qword_count, Address::times_8, 0), to); + __ BIND(L_copy_32_bytes); + __ subq(qword_count, 4); + __ jcc(Assembler::greaterEqual, L_loop); + __ addq(qword_count, 4); + __ jcc(Assembler::greater, L_copy_8_bytes); // Copy trailing qwords + } + + + // Arguments: + // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary + // ignored + // name - stub name string + // + // Inputs: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // + // If 'from' and/or 'to' are aligned on 4-, 2-, or 1-byte boundaries, + // we let the hardware handle it. The one to eight bytes within words, + // dwords or qwords that span cache line boundaries will still be loaded + // and stored atomically. + // + // Side Effects: + // disjoint_byte_copy_entry is set to the no-overlap entry point + // used by generate_conjoint_byte_copy(). + // + address generate_disjoint_byte_copy(bool aligned, const char *name) { + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_copy_2_bytes; + Label L_copy_byte, L_exit; + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register count = rdx; // elements count + const Register byte_count = rcx; + const Register qword_count = count; + const Register end_from = from; // source array end address + const Register end_to = to; // destination array end address + // End pointers are inclusive, and if count is not zero they point + // to the last unit copied: end_to[0] := end_from[0] + + __ enter(); // required for proper stackwalking of RuntimeStub frame + assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. + + disjoint_byte_copy_entry = __ pc(); + BLOCK_COMMENT("Entry:"); + // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) + + setup_arg_regs(); // from => rdi, to => rsi, count => rdx + // r9 and r10 may be used to save non-volatile registers + + // 'from', 'to' and 'count' are now valid + __ movq(byte_count, count); + __ shrq(count, 3); // count => qword_count + + // Copy from low to high addresses. Use 'to' as scratch. + __ leaq(end_from, Address(from, qword_count, Address::times_8, -8)); + __ leaq(end_to, Address(to, qword_count, Address::times_8, -8)); + __ negq(qword_count); // make the count negative + __ jmp(L_copy_32_bytes); + + // Copy trailing qwords + __ BIND(L_copy_8_bytes); + __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); + __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); + __ incrementq(qword_count); + __ jcc(Assembler::notZero, L_copy_8_bytes); + + // Check for and copy trailing dword + __ BIND(L_copy_4_bytes); + __ testq(byte_count, 4); + __ jccb(Assembler::zero, L_copy_2_bytes); + __ movl(rax, Address(end_from, 8)); + __ movl(Address(end_to, 8), rax); + + __ addq(end_from, 4); + __ addq(end_to, 4); + + // Check for and copy trailing word + __ BIND(L_copy_2_bytes); + __ testq(byte_count, 2); + __ jccb(Assembler::zero, L_copy_byte); + __ movw(rax, Address(end_from, 8)); + __ movw(Address(end_to, 8), rax); + + __ addq(end_from, 2); + __ addq(end_to, 2); + + // Check for and copy trailing byte + __ BIND(L_copy_byte); + __ testq(byte_count, 1); + __ jccb(Assembler::zero, L_exit); + __ movb(rax, Address(end_from, 8)); + __ movb(Address(end_to, 8), rax); + + __ BIND(L_exit); + inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + // Copy in 32-bytes chunks + copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); + __ jmp(L_copy_4_bytes); + + return start; + } + + // Arguments: + // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary + // ignored + // name - stub name string + // + // Inputs: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // + // If 'from' and/or 'to' are aligned on 4-, 2-, or 1-byte boundaries, + // we let the hardware handle it. The one to eight bytes within words, + // dwords or qwords that span cache line boundaries will still be loaded + // and stored atomically. + // + address generate_conjoint_byte_copy(bool aligned, const char *name) { + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_copy_2_bytes; + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register count = rdx; // elements count + const Register byte_count = rcx; + const Register qword_count = count; + + __ enter(); // required for proper stackwalking of RuntimeStub frame + assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. + + byte_copy_entry = __ pc(); + BLOCK_COMMENT("Entry:"); + // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) + + array_overlap_test(disjoint_byte_copy_entry, Address::times_1); + setup_arg_regs(); // from => rdi, to => rsi, count => rdx + // r9 and r10 may be used to save non-volatile registers + + // 'from', 'to' and 'count' are now valid + __ movq(byte_count, count); + __ shrq(count, 3); // count => qword_count + + // Copy from high to low addresses. + + // Check for and copy trailing byte + __ testq(byte_count, 1); + __ jcc(Assembler::zero, L_copy_2_bytes); + __ movb(rax, Address(from, byte_count, Address::times_1, -1)); + __ movb(Address(to, byte_count, Address::times_1, -1), rax); + __ decrementq(byte_count); // Adjust for possible trailing word + + // Check for and copy trailing word + __ BIND(L_copy_2_bytes); + __ testq(byte_count, 2); + __ jcc(Assembler::zero, L_copy_4_bytes); + __ movw(rax, Address(from, byte_count, Address::times_1, -2)); + __ movw(Address(to, byte_count, Address::times_1, -2), rax); + + // Check for and copy trailing dword + __ BIND(L_copy_4_bytes); + __ testq(byte_count, 4); + __ jcc(Assembler::zero, L_copy_32_bytes); + __ movl(rax, Address(from, qword_count, Address::times_8)); + __ movl(Address(to, qword_count, Address::times_8), rax); + __ jmp(L_copy_32_bytes); + + // Copy trailing qwords + __ BIND(L_copy_8_bytes); + __ movq(rax, Address(from, qword_count, Address::times_8, -8)); + __ movq(Address(to, qword_count, Address::times_8, -8), rax); + __ decrementq(qword_count); + __ jcc(Assembler::notZero, L_copy_8_bytes); + + inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + // Copy in 32-bytes chunks + copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); + + inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + return start; + } + + // Arguments: + // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary + // ignored + // name - stub name string + // + // Inputs: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // + // If 'from' and/or 'to' are aligned on 4- or 2-byte boundaries, we + // let the hardware handle it. The two or four words within dwords + // or qwords that span cache line boundaries will still be loaded + // and stored atomically. + // + // Side Effects: + // disjoint_short_copy_entry is set to the no-overlap entry point + // used by generate_conjoint_short_copy(). + // + address generate_disjoint_short_copy(bool aligned, const char *name) { + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes,L_copy_2_bytes,L_exit; + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register count = rdx; // elements count + const Register word_count = rcx; + const Register qword_count = count; + const Register end_from = from; // source array end address + const Register end_to = to; // destination array end address + // End pointers are inclusive, and if count is not zero they point + // to the last unit copied: end_to[0] := end_from[0] + + __ enter(); // required for proper stackwalking of RuntimeStub frame + assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. + + disjoint_short_copy_entry = __ pc(); + BLOCK_COMMENT("Entry:"); + // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) + + setup_arg_regs(); // from => rdi, to => rsi, count => rdx + // r9 and r10 may be used to save non-volatile registers + + // 'from', 'to' and 'count' are now valid + __ movq(word_count, count); + __ shrq(count, 2); // count => qword_count + + // Copy from low to high addresses. Use 'to' as scratch. + __ leaq(end_from, Address(from, qword_count, Address::times_8, -8)); + __ leaq(end_to, Address(to, qword_count, Address::times_8, -8)); + __ negq(qword_count); + __ jmp(L_copy_32_bytes); + + // Copy trailing qwords + __ BIND(L_copy_8_bytes); + __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); + __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); + __ incrementq(qword_count); + __ jcc(Assembler::notZero, L_copy_8_bytes); + + // Original 'dest' is trashed, so we can't use it as a + // base register for a possible trailing word copy + + // Check for and copy trailing dword + __ BIND(L_copy_4_bytes); + __ testq(word_count, 2); + __ jccb(Assembler::zero, L_copy_2_bytes); + __ movl(rax, Address(end_from, 8)); + __ movl(Address(end_to, 8), rax); + + __ addq(end_from, 4); + __ addq(end_to, 4); + + // Check for and copy trailing word + __ BIND(L_copy_2_bytes); + __ testq(word_count, 1); + __ jccb(Assembler::zero, L_exit); + __ movw(rax, Address(end_from, 8)); + __ movw(Address(end_to, 8), rax); + + __ BIND(L_exit); + inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + // Copy in 32-bytes chunks + copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); + __ jmp(L_copy_4_bytes); + + return start; + } + + // Arguments: + // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary + // ignored + // name - stub name string + // + // Inputs: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // + // If 'from' and/or 'to' are aligned on 4- or 2-byte boundaries, we + // let the hardware handle it. The two or four words within dwords + // or qwords that span cache line boundaries will still be loaded + // and stored atomically. + // + address generate_conjoint_short_copy(bool aligned, const char *name) { + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes; + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register count = rdx; // elements count + const Register word_count = rcx; + const Register qword_count = count; + + __ enter(); // required for proper stackwalking of RuntimeStub frame + assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. + + short_copy_entry = __ pc(); + BLOCK_COMMENT("Entry:"); + // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) + + array_overlap_test(disjoint_short_copy_entry, Address::times_2); + setup_arg_regs(); // from => rdi, to => rsi, count => rdx + // r9 and r10 may be used to save non-volatile registers + + // 'from', 'to' and 'count' are now valid + __ movq(word_count, count); + __ shrq(count, 2); // count => qword_count + + // Copy from high to low addresses. Use 'to' as scratch. + + // Check for and copy trailing word + __ testq(word_count, 1); + __ jccb(Assembler::zero, L_copy_4_bytes); + __ movw(rax, Address(from, word_count, Address::times_2, -2)); + __ movw(Address(to, word_count, Address::times_2, -2), rax); + + // Check for and copy trailing dword + __ BIND(L_copy_4_bytes); + __ testq(word_count, 2); + __ jcc(Assembler::zero, L_copy_32_bytes); + __ movl(rax, Address(from, qword_count, Address::times_8)); + __ movl(Address(to, qword_count, Address::times_8), rax); + __ jmp(L_copy_32_bytes); + + // Copy trailing qwords + __ BIND(L_copy_8_bytes); + __ movq(rax, Address(from, qword_count, Address::times_8, -8)); + __ movq(Address(to, qword_count, Address::times_8, -8), rax); + __ decrementq(qword_count); + __ jcc(Assembler::notZero, L_copy_8_bytes); + + inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + // Copy in 32-bytes chunks + copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); + + inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + return start; + } + + // Arguments: + // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary + // ignored + // name - stub name string + // + // Inputs: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // + // If 'from' and/or 'to' are aligned on 4-byte boundaries, we let + // the hardware handle it. The two dwords within qwords that span + // cache line boundaries will still be loaded and stored atomicly. + // + // Side Effects: + // disjoint_int_copy_entry is set to the no-overlap entry point + // used by generate_conjoint_int_copy(). + // + address generate_disjoint_int_copy(bool aligned, const char *name) { + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_exit; + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register count = rdx; // elements count + const Register dword_count = rcx; + const Register qword_count = count; + const Register end_from = from; // source array end address + const Register end_to = to; // destination array end address + // End pointers are inclusive, and if count is not zero they point + // to the last unit copied: end_to[0] := end_from[0] + + __ enter(); // required for proper stackwalking of RuntimeStub frame + assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. + + disjoint_int_copy_entry = __ pc(); + BLOCK_COMMENT("Entry:"); + // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) + + setup_arg_regs(); // from => rdi, to => rsi, count => rdx + // r9 and r10 may be used to save non-volatile registers + + // 'from', 'to' and 'count' are now valid + __ movq(dword_count, count); + __ shrq(count, 1); // count => qword_count + + // Copy from low to high addresses. Use 'to' as scratch. + __ leaq(end_from, Address(from, qword_count, Address::times_8, -8)); + __ leaq(end_to, Address(to, qword_count, Address::times_8, -8)); + __ negq(qword_count); + __ jmp(L_copy_32_bytes); + + // Copy trailing qwords + __ BIND(L_copy_8_bytes); + __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); + __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); + __ incrementq(qword_count); + __ jcc(Assembler::notZero, L_copy_8_bytes); + + // Check for and copy trailing dword + __ BIND(L_copy_4_bytes); + __ testq(dword_count, 1); // Only byte test since the value is 0 or 1 + __ jccb(Assembler::zero, L_exit); + __ movl(rax, Address(end_from, 8)); + __ movl(Address(end_to, 8), rax); + + __ BIND(L_exit); + inc_counter_np(SharedRuntime::_jint_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + // Copy 32-bytes chunks + copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); + __ jmp(L_copy_4_bytes); + + return start; + } + + // Arguments: + // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary + // ignored + // name - stub name string + // + // Inputs: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // + // If 'from' and/or 'to' are aligned on 4-byte boundaries, we let + // the hardware handle it. The two dwords within qwords that span + // cache line boundaries will still be loaded and stored atomicly. + // + address generate_conjoint_int_copy(bool aligned, const char *name) { + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + Label L_copy_32_bytes, L_copy_8_bytes, L_copy_2_bytes; + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register count = rdx; // elements count + const Register dword_count = rcx; + const Register qword_count = count; + + __ enter(); // required for proper stackwalking of RuntimeStub frame + assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. + + int_copy_entry = __ pc(); + BLOCK_COMMENT("Entry:"); + // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) + + array_overlap_test(disjoint_int_copy_entry, Address::times_4); + setup_arg_regs(); // from => rdi, to => rsi, count => rdx + // r9 and r10 may be used to save non-volatile registers + + // 'from', 'to' and 'count' are now valid + __ movq(dword_count, count); + __ shrq(count, 1); // count => qword_count + + // Copy from high to low addresses. Use 'to' as scratch. + + // Check for and copy trailing dword + __ testq(dword_count, 1); + __ jcc(Assembler::zero, L_copy_32_bytes); + __ movl(rax, Address(from, dword_count, Address::times_4, -4)); + __ movl(Address(to, dword_count, Address::times_4, -4), rax); + __ jmp(L_copy_32_bytes); + + // Copy trailing qwords + __ BIND(L_copy_8_bytes); + __ movq(rax, Address(from, qword_count, Address::times_8, -8)); + __ movq(Address(to, qword_count, Address::times_8, -8), rax); + __ decrementq(qword_count); + __ jcc(Assembler::notZero, L_copy_8_bytes); + + inc_counter_np(SharedRuntime::_jint_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + // Copy in 32-bytes chunks + copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); + + inc_counter_np(SharedRuntime::_jint_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + return start; + } + + // Arguments: + // aligned - true => Input and output aligned on a HeapWord boundary == 8 bytes + // ignored + // is_oop - true => oop array, so generate store check code + // name - stub name string + // + // Inputs: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // + // Side Effects: + // disjoint_oop_copy_entry or disjoint_long_copy_entry is set to the + // no-overlap entry point used by generate_conjoint_long_oop_copy(). + // + address generate_disjoint_long_oop_copy(bool aligned, bool is_oop, const char *name) { + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + Label L_copy_32_bytes, L_copy_8_bytes, L_exit; + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register qword_count = rdx; // elements count + const Register end_from = from; // source array end address + const Register end_to = rcx; // destination array end address + const Register saved_to = to; + // End pointers are inclusive, and if count is not zero they point + // to the last unit copied: end_to[0] := end_from[0] + + __ enter(); // required for proper stackwalking of RuntimeStub frame + // Save no-overlap entry point for generate_conjoint_long_oop_copy() + assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. + + if (is_oop) { + disjoint_oop_copy_entry = __ pc(); + // no registers are destroyed by this call + gen_write_ref_array_pre_barrier(/* dest */ c_rarg1, /* count */ c_rarg2); + } else { + disjoint_long_copy_entry = __ pc(); + } + BLOCK_COMMENT("Entry:"); + // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) + + setup_arg_regs(); // from => rdi, to => rsi, count => rdx + // r9 and r10 may be used to save non-volatile registers + + // 'from', 'to' and 'qword_count' are now valid + + // Copy from low to high addresses. Use 'to' as scratch. + __ leaq(end_from, Address(from, qword_count, Address::times_8, -8)); + __ leaq(end_to, Address(to, qword_count, Address::times_8, -8)); + __ negq(qword_count); + __ jmp(L_copy_32_bytes); + + // Copy trailing qwords + __ BIND(L_copy_8_bytes); + __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); + __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); + __ incrementq(qword_count); + __ jcc(Assembler::notZero, L_copy_8_bytes); + + if (is_oop) { + __ jmp(L_exit); + } else { + inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + } + + // Copy 64-byte chunks + copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); + + if (is_oop) { + __ BIND(L_exit); + gen_write_ref_array_post_barrier(saved_to, end_to, rax); + inc_counter_np(SharedRuntime::_oop_array_copy_ctr); + } else { + inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); + } + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + return start; + } + + // Arguments: + // aligned - true => Input and output aligned on a HeapWord boundary == 8 bytes + // ignored + // is_oop - true => oop array, so generate store check code + // name - stub name string + // + // Inputs: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // + address generate_conjoint_long_oop_copy(bool aligned, bool is_oop, const char *name) { + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + Label L_copy_32_bytes, L_copy_8_bytes, L_exit; + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register qword_count = rdx; // elements count + const Register saved_count = rcx; + + __ enter(); // required for proper stackwalking of RuntimeStub frame + assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. + + address disjoint_copy_entry = NULL; + if (is_oop) { + disjoint_copy_entry = disjoint_oop_copy_entry; + oop_copy_entry = __ pc(); + } else { + disjoint_copy_entry = disjoint_long_copy_entry; + long_copy_entry = __ pc(); + } + BLOCK_COMMENT("Entry:"); + // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) + + array_overlap_test(disjoint_copy_entry, Address::times_8); + setup_arg_regs(); // from => rdi, to => rsi, count => rdx + // r9 and r10 may be used to save non-volatile registers + + // 'from', 'to' and 'qword_count' are now valid + + if (is_oop) { + // Save to and count for store barrier + __ movq(saved_count, qword_count); + // No registers are destroyed by this call + gen_write_ref_array_pre_barrier(to, saved_count); + } + + // Copy from high to low addresses. Use rcx as scratch. + + __ jmp(L_copy_32_bytes); + + // Copy trailing qwords + __ BIND(L_copy_8_bytes); + __ movq(rax, Address(from, qword_count, Address::times_8, -8)); + __ movq(Address(to, qword_count, Address::times_8, -8), rax); + __ decrementq(qword_count); + __ jcc(Assembler::notZero, L_copy_8_bytes); + + if (is_oop) { + __ jmp(L_exit); + } else { + inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + } + + // Copy in 32-bytes chunks + copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); + + if (is_oop) { + __ BIND(L_exit); + __ leaq(rcx, Address(to, saved_count, Address::times_8, -8)); + gen_write_ref_array_post_barrier(to, rcx, rax); + inc_counter_np(SharedRuntime::_oop_array_copy_ctr); + } else { + inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); + } + restore_arg_regs(); + __ xorq(rax, rax); // return 0 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + return start; + } + + + // Helper for generating a dynamic type check. + // Smashes no registers. + void generate_type_check(Register sub_klass, + Register super_check_offset, + Register super_klass, + Label& L_success) { + assert_different_registers(sub_klass, super_check_offset, super_klass); + + BLOCK_COMMENT("type_check:"); + + Label L_miss; + + // a couple of useful fields in sub_klass: + int ss_offset = (klassOopDesc::header_size() * HeapWordSize + + Klass::secondary_supers_offset_in_bytes()); + int sc_offset = (klassOopDesc::header_size() * HeapWordSize + + Klass::secondary_super_cache_offset_in_bytes()); + Address secondary_supers_addr(sub_klass, ss_offset); + Address super_cache_addr( sub_klass, sc_offset); + + // if the pointers are equal, we are done (e.g., String[] elements) + __ cmpq(super_klass, sub_klass); + __ jcc(Assembler::equal, L_success); + + // check the supertype display: + Address super_check_addr(sub_klass, super_check_offset, Address::times_1, 0); + __ cmpq(super_klass, super_check_addr); // test the super type + __ jcc(Assembler::equal, L_success); + + // if it was a primary super, we can just fail immediately + __ cmpl(super_check_offset, sc_offset); + __ jcc(Assembler::notEqual, L_miss); + + // Now do a linear scan of the secondary super-klass chain. + // The repne_scan instruction uses fixed registers, which we must spill. + // (We need a couple more temps in any case.) + // This code is rarely used, so simplicity is a virtue here. + inc_counter_np(SharedRuntime::_partial_subtype_ctr); + { + __ pushq(rax); + __ pushq(rcx); + __ pushq(rdi); + assert_different_registers(sub_klass, super_klass, rax, rcx, rdi); + + __ movq(rdi, secondary_supers_addr); + // Load the array length. + __ movl(rcx, Address(rdi, arrayOopDesc::length_offset_in_bytes())); + // Skip to start of data. + __ addq(rdi, arrayOopDesc::base_offset_in_bytes(T_OBJECT)); + // Scan rcx words at [rdi] for occurance of rax + // Set NZ/Z based on last compare + __ movq(rax, super_klass); + __ repne_scan(); + + // Unspill the temp. registers: + __ popq(rdi); + __ popq(rcx); + __ popq(rax); + + __ jcc(Assembler::notEqual, L_miss); + } + + // Success. Cache the super we found and proceed in triumph. + __ movq(super_cache_addr, super_klass); // note: rax is dead + __ jmp(L_success); + + // Fall through on failure! + __ BIND(L_miss); + } + + // + // Generate checkcasting array copy stub + // + // Input: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - element count, treated as ssize_t, can be zero + // c_rarg3 - size_t ckoff (super_check_offset) + // not Win64 + // c_rarg4 - oop ckval (super_klass) + // Win64 + // rsp+40 - oop ckval (super_klass) + // + // Output: + // rax == 0 - success + // rax == -1^K - failure, where K is partial transfer count + // + address generate_checkcast_copy(const char *name) { + + Label L_load_element, L_store_element, L_do_card_marks, L_done; + + // Input registers (after setup_arg_regs) + const Register from = rdi; // source array address + const Register to = rsi; // destination array address + const Register length = rdx; // elements count + const Register ckoff = rcx; // super_check_offset + const Register ckval = r8; // super_klass + + // Registers used as temps (r13, r14 are save-on-entry) + const Register end_from = from; // source array end address + const Register end_to = r13; // destination array end address + const Register count = rdx; // -(count_remaining) + const Register r14_length = r14; // saved copy of length + // End pointers are inclusive, and if length is not zero they point + // to the last unit copied: end_to[0] := end_from[0] + + const Register rax_oop = rax; // actual oop copied + const Register r11_klass = r11; // oop._klass + + //--------------------------------------------------------------- + // Assembler stub will be used for this call to arraycopy + // if the two arrays are subtypes of Object[] but the + // destination array type is not equal to or a supertype + // of the source type. Each element must be separately + // checked. + + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + __ enter(); // required for proper stackwalking of RuntimeStub frame + + checkcast_copy_entry = __ pc(); + BLOCK_COMMENT("Entry:"); + +#ifdef ASSERT + // caller guarantees that the arrays really are different + // otherwise, we would have to make conjoint checks + { Label L; + array_overlap_test(L, Address::times_8); + __ stop("checkcast_copy within a single array"); + __ bind(L); + } +#endif //ASSERT + + // allocate spill slots for r13, r14 + enum { + saved_r13_offset, + saved_r14_offset, + saved_rbp_offset, + saved_rip_offset, + saved_rarg0_offset + }; + __ subq(rsp, saved_rbp_offset * wordSize); + __ movq(Address(rsp, saved_r13_offset * wordSize), r13); + __ movq(Address(rsp, saved_r14_offset * wordSize), r14); + setup_arg_regs(4); // from => rdi, to => rsi, length => rdx + // ckoff => rcx, ckval => r8 + // r9 and r10 may be used to save non-volatile registers +#ifdef _WIN64 + // last argument (#4) is on stack on Win64 + const int ckval_offset = saved_rarg0_offset + 4; + __ movq(ckval, Address(rsp, ckval_offset * wordSize)); +#endif + + // check that int operands are properly extended to size_t + assert_clean_int(length, rax); + assert_clean_int(ckoff, rax); + +#ifdef ASSERT + BLOCK_COMMENT("assert consistent ckoff/ckval"); + // The ckoff and ckval must be mutually consistent, + // even though caller generates both. + { Label L; + int sco_offset = (klassOopDesc::header_size() * HeapWordSize + + Klass::super_check_offset_offset_in_bytes()); + __ cmpl(ckoff, Address(ckval, sco_offset)); + __ jcc(Assembler::equal, L); + __ stop("super_check_offset inconsistent"); + __ bind(L); + } +#endif //ASSERT + + // Loop-invariant addresses. They are exclusive end pointers. + Address end_from_addr(from, length, Address::times_8, 0); + Address end_to_addr(to, length, Address::times_8, 0); + // Loop-variant addresses. They assume post-incremented count < 0. + Address from_element_addr(end_from, count, Address::times_8, 0); + Address to_element_addr(end_to, count, Address::times_8, 0); + Address oop_klass_addr(rax_oop, oopDesc::klass_offset_in_bytes()); + + gen_write_ref_array_pre_barrier(to, count); + + // Copy from low to high addresses, indexed from the end of each array. + __ leaq(end_from, end_from_addr); + __ leaq(end_to, end_to_addr); + __ movq(r14_length, length); // save a copy of the length + assert(length == count, ""); // else fix next line: + __ negq(count); // negate and test the length + __ jcc(Assembler::notZero, L_load_element); + + // Empty array: Nothing to do. + __ xorq(rax, rax); // return 0 on (trivial) success + __ jmp(L_done); + + // ======== begin loop ======== + // (Loop is rotated; its entry is L_load_element.) + // Loop control: + // for (count = -count; count != 0; count++) + // Base pointers src, dst are biased by 8*(count-1),to last element. + __ align(16); + + __ BIND(L_store_element); + __ movq(to_element_addr, rax_oop); // store the oop + __ incrementq(count); // increment the count toward zero + __ jcc(Assembler::zero, L_do_card_marks); + + // ======== loop entry is here ======== + __ BIND(L_load_element); + __ movq(rax_oop, from_element_addr); // load the oop + __ testq(rax_oop, rax_oop); + __ jcc(Assembler::zero, L_store_element); + + __ movq(r11_klass, oop_klass_addr); // query the object klass + generate_type_check(r11_klass, ckoff, ckval, L_store_element); + // ======== end loop ======== + + // It was a real error; we must depend on the caller to finish the job. + // Register rdx = -1 * number of *remaining* oops, r14 = *total* oops. + // Emit GC store barriers for the oops we have copied (r14 + rdx), + // and report their number to the caller. + assert_different_registers(rax, r14_length, count, to, end_to, rcx); + __ leaq(end_to, to_element_addr); + gen_write_ref_array_post_barrier(to, end_to, rcx); + __ movq(rax, r14_length); // original oops + __ addq(rax, count); // K = (original - remaining) oops + __ notq(rax); // report (-1^K) to caller + __ jmp(L_done); + + // Come here on success only. + __ BIND(L_do_card_marks); + __ addq(end_to, -wordSize); // make an inclusive end pointer + gen_write_ref_array_post_barrier(to, end_to, rcx); + __ xorq(rax, rax); // return 0 on success + + // Common exit point (success or failure). + __ BIND(L_done); + __ movq(r13, Address(rsp, saved_r13_offset * wordSize)); + __ movq(r14, Address(rsp, saved_r14_offset * wordSize)); + inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr); + restore_arg_regs(); + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + return start; + } + + // + // Generate 'unsafe' array copy stub + // Though just as safe as the other stubs, it takes an unscaled + // size_t argument instead of an element count. + // + // Input: + // c_rarg0 - source array address + // c_rarg1 - destination array address + // c_rarg2 - byte count, treated as ssize_t, can be zero + // + // Examines the alignment of the operands and dispatches + // to a long, int, short, or byte copy loop. + // + address generate_unsafe_copy(const char *name) { + + Label L_long_aligned, L_int_aligned, L_short_aligned; + + // Input registers (before setup_arg_regs) + const Register from = c_rarg0; // source array address + const Register to = c_rarg1; // destination array address + const Register size = c_rarg2; // byte count (size_t) + + // Register used as a temp + const Register bits = rax; // test copy of low bits + + __ align(CodeEntryAlignment); + StubCodeMark mark(this, "StubRoutines", name); + address start = __ pc(); + + __ enter(); // required for proper stackwalking of RuntimeStub frame + + // bump this on entry, not on exit: + inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr); + + __ movq(bits, from); + __ orq(bits, to); + __ orq(bits, size); + + __ testb(bits, BytesPerLong-1); + __ jccb(Assembler::zero, L_long_aligned); + + __ testb(bits, BytesPerInt-1); + __ jccb(Assembler::zero, L_int_aligned); + + __ testb(bits, BytesPerShort-1); + __ jump_cc(Assembler::notZero, RuntimeAddress(byte_copy_entry)); + + __ BIND(L_short_aligned); + __ shrq(size, LogBytesPerShort); // size => short_count + __ jump(RuntimeAddress(short_copy_entry)); + + __ BIND(L_int_aligned); + __ shrq(size, LogBytesPerInt); // size => int_count + __ jump(RuntimeAddress(int_copy_entry)); + + __ BIND(L_long_aligned); + __ shrq(size, LogBytesPerLong); // size => qword_count + __ jump(RuntimeAddress(long_copy_entry)); + + return start; + } + + // Perform range checks on the proposed arraycopy. + // Kills temp, but nothing else. + // Also, clean the sign bits of src_pos and dst_pos. + void arraycopy_range_checks(Register src, // source array oop (c_rarg0) + Register src_pos, // source position (c_rarg1) + Register dst, // destination array oo (c_rarg2) + Register dst_pos, // destination position (c_rarg3) + Register length, + Register temp, + Label& L_failed) { + BLOCK_COMMENT("arraycopy_range_checks:"); + + // if (src_pos + length > arrayOop(src)->length()) FAIL; + __ movl(temp, length); + __ addl(temp, src_pos); // src_pos + length + __ cmpl(temp, Address(src, arrayOopDesc::length_offset_in_bytes())); + __ jcc(Assembler::above, L_failed); + + // if (dst_pos + length > arrayOop(dst)->length()) FAIL; + __ movl(temp, length); + __ addl(temp, dst_pos); // dst_pos + length + __ cmpl(temp, Address(dst, arrayOopDesc::length_offset_in_bytes())); + __ jcc(Assembler::above, L_failed); + + // Have to clean up high 32-bits of 'src_pos' and 'dst_pos'. + // Move with sign extension can be used since they are positive. + __ movslq(src_pos, src_pos); + __ movslq(dst_pos, dst_pos); + + BLOCK_COMMENT("arraycopy_range_checks done"); + } + + // + // Generate generic array copy stubs + // + // Input: + // c_rarg0 - src oop + // c_rarg1 - src_pos (32-bits) + // c_rarg2 - dst oop + // c_rarg3 - dst_pos (32-bits) + // not Win64 + // c_rarg4 - element count (32-bits) + // Win64 + // rsp+40 - element count (32-bits) + // + // Output: + // rax == 0 - success + // rax == -1^K - failure, where K is partial transfer count + // + address generate_generic_copy(const char *name) { + + Label L_failed, L_failed_0, L_objArray; + Label L_copy_bytes, L_copy_shorts, L_copy_ints, L_copy_longs; + + // Input registers + const Register src = c_rarg0; // source array oop + const Register src_pos = c_rarg1; // source position + const Register dst = c_rarg2; // destination array oop + const Register dst_pos = c_rarg3; // destination position + // elements count is on stack on Win64 +#ifdef _WIN64 +#define C_RARG4 Address(rsp, 6 * wordSize) +#else +#define C_RARG4 c_rarg4 +#endif + + { int modulus = CodeEntryAlignment; + int target = modulus - 5; // 5 = sizeof jmp(L_failed) + int advance = target - (__ offset() % modulus); + if (advance < 0) advance += modulus; + if (advance > 0) __ nop(advance); + } + StubCodeMark mark(this, "StubRoutines", name); + + // Short-hop target to L_failed. Makes for denser prologue code. + __ BIND(L_failed_0); + __ jmp(L_failed); + assert(__ offset() % CodeEntryAlignment == 0, "no further alignment needed"); + + __ align(CodeEntryAlignment); + address start = __ pc(); + + __ enter(); // required for proper stackwalking of RuntimeStub frame + + // bump this on entry, not on exit: + inc_counter_np(SharedRuntime::_generic_array_copy_ctr); + + //----------------------------------------------------------------------- + // Assembler stub will be used for this call to arraycopy + // if the following conditions are met: + // + // (1) src and dst must not be null. + // (2) src_pos must not be negative. + // (3) dst_pos must not be negative. + // (4) length must not be negative. + // (5) src klass and dst klass should be the same and not NULL. + // (6) src and dst should be arrays. + // (7) src_pos + length must not exceed length of src. + // (8) dst_pos + length must not exceed length of dst. + // + + // if (src == NULL) return -1; + __ testq(src, src); // src oop + size_t j1off = __ offset(); + __ jccb(Assembler::zero, L_failed_0); + + // if (src_pos < 0) return -1; + __ testl(src_pos, src_pos); // src_pos (32-bits) + __ jccb(Assembler::negative, L_failed_0); + + // if (dst == NULL) return -1; + __ testq(dst, dst); // dst oop + __ jccb(Assembler::zero, L_failed_0); + + // if (dst_pos < 0) return -1; + __ testl(dst_pos, dst_pos); // dst_pos (32-bits) + size_t j4off = __ offset(); + __ jccb(Assembler::negative, L_failed_0); + + // The first four tests are very dense code, + // but not quite dense enough to put four + // jumps in a 16-byte instruction fetch buffer. + // That's good, because some branch predicters + // do not like jumps so close together. + // Make sure of this. + guarantee(((j1off ^ j4off) & ~15) != 0, "I$ line of 1st & 4th jumps"); + + // registers used as temp + const Register r11_length = r11; // elements count to copy + const Register r10_src_klass = r10; // array klass + + // if (length < 0) return -1; + __ movl(r11_length, C_RARG4); // length (elements count, 32-bits value) + __ testl(r11_length, r11_length); + __ jccb(Assembler::negative, L_failed_0); + + Address src_klass_addr(src, oopDesc::klass_offset_in_bytes()); + Address dst_klass_addr(dst, oopDesc::klass_offset_in_bytes()); + __ movq(r10_src_klass, src_klass_addr); +#ifdef ASSERT + // assert(src->klass() != NULL); + BLOCK_COMMENT("assert klasses not null"); + { Label L1, L2; + __ testq(r10_src_klass, r10_src_klass); + __ jcc(Assembler::notZero, L2); // it is broken if klass is NULL + __ bind(L1); + __ stop("broken null klass"); + __ bind(L2); + __ cmpq(dst_klass_addr, 0); + __ jcc(Assembler::equal, L1); // this would be broken also + BLOCK_COMMENT("assert done"); + } +#endif + + // Load layout helper (32-bits) + // + // |array_tag| | header_size | element_type | |log2_element_size| + // 32 30 24 16 8 2 0 + // + // array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0 + // + + int lh_offset = klassOopDesc::header_size() * HeapWordSize + + Klass::layout_helper_offset_in_bytes(); + + const Register rax_lh = rax; // layout helper + + __ movl(rax_lh, Address(r10_src_klass, lh_offset)); + + // Handle objArrays completely differently... + jint objArray_lh = Klass::array_layout_helper(T_OBJECT); + __ cmpl(rax_lh, objArray_lh); + __ jcc(Assembler::equal, L_objArray); + + // if (src->klass() != dst->klass()) return -1; + __ cmpq(r10_src_klass, dst_klass_addr); + __ jcc(Assembler::notEqual, L_failed); + + // if (!src->is_Array()) return -1; + __ cmpl(rax_lh, Klass::_lh_neutral_value); + __ jcc(Assembler::greaterEqual, L_failed); + + // At this point, it is known to be a typeArray (array_tag 0x3). +#ifdef ASSERT + { Label L; + __ cmpl(rax_lh, (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift)); + __ jcc(Assembler::greaterEqual, L); + __ stop("must be a primitive array"); + __ bind(L); + } +#endif + + arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, + r10, L_failed); + + // typeArrayKlass + // + // src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize); + // dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize); + // + + const Register r10_offset = r10; // array offset + const Register rax_elsize = rax_lh; // element size + + __ movl(r10_offset, rax_lh); + __ shrl(r10_offset, Klass::_lh_header_size_shift); + __ andq(r10_offset, Klass::_lh_header_size_mask); // array_offset + __ addq(src, r10_offset); // src array offset + __ addq(dst, r10_offset); // dst array offset + BLOCK_COMMENT("choose copy loop based on element size"); + __ andl(rax_lh, Klass::_lh_log2_element_size_mask); // rax_lh -> rax_elsize + + // next registers should be set before the jump to corresponding stub + const Register from = c_rarg0; // source array address + const Register to = c_rarg1; // destination array address + const Register count = c_rarg2; // elements count + + // 'from', 'to', 'count' registers should be set in such order + // since they are the same as 'src', 'src_pos', 'dst'. + + __ BIND(L_copy_bytes); + __ cmpl(rax_elsize, 0); + __ jccb(Assembler::notEqual, L_copy_shorts); + __ leaq(from, Address(src, src_pos, Address::times_1, 0));// src_addr + __ leaq(to, Address(dst, dst_pos, Address::times_1, 0));// dst_addr + __ movslq(count, r11_length); // length + __ jump(RuntimeAddress(byte_copy_entry)); + + __ BIND(L_copy_shorts); + __ cmpl(rax_elsize, LogBytesPerShort); + __ jccb(Assembler::notEqual, L_copy_ints); + __ leaq(from, Address(src, src_pos, Address::times_2, 0));// src_addr + __ leaq(to, Address(dst, dst_pos, Address::times_2, 0));// dst_addr + __ movslq(count, r11_length); // length + __ jump(RuntimeAddress(short_copy_entry)); + + __ BIND(L_copy_ints); + __ cmpl(rax_elsize, LogBytesPerInt); + __ jccb(Assembler::notEqual, L_copy_longs); + __ leaq(from, Address(src, src_pos, Address::times_4, 0));// src_addr + __ leaq(to, Address(dst, dst_pos, Address::times_4, 0));// dst_addr + __ movslq(count, r11_length); // length + __ jump(RuntimeAddress(int_copy_entry)); + + __ BIND(L_copy_longs); +#ifdef ASSERT + { Label L; + __ cmpl(rax_elsize, LogBytesPerLong); + __ jcc(Assembler::equal, L); + __ stop("must be long copy, but elsize is wrong"); + __ bind(L); + } +#endif + __ leaq(from, Address(src, src_pos, Address::times_8, 0));// src_addr + __ leaq(to, Address(dst, dst_pos, Address::times_8, 0));// dst_addr + __ movslq(count, r11_length); // length + __ jump(RuntimeAddress(long_copy_entry)); + + // objArrayKlass + __ BIND(L_objArray); + // live at this point: r10_src_klass, src[_pos], dst[_pos] + + Label L_plain_copy, L_checkcast_copy; + // test array classes for subtyping + __ cmpq(r10_src_klass, dst_klass_addr); // usual case is exact equality + __ jcc(Assembler::notEqual, L_checkcast_copy); + + // Identically typed arrays can be copied without element-wise checks. + arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, + r10, L_failed); + + __ leaq(from, Address(src, src_pos, Address::times_8, + arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // src_addr + __ leaq(to, Address(dst, dst_pos, Address::times_8, + arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // dst_addr + __ movslq(count, r11_length); // length + __ BIND(L_plain_copy); + __ jump(RuntimeAddress(oop_copy_entry)); + + __ BIND(L_checkcast_copy); + // live at this point: r10_src_klass, !r11_length + { + // assert(r11_length == C_RARG4); // will reload from here + Register r11_dst_klass = r11; + __ movq(r11_dst_klass, dst_klass_addr); + + // Before looking at dst.length, make sure dst is also an objArray. + __ cmpl(Address(r11_dst_klass, lh_offset), objArray_lh); + __ jcc(Assembler::notEqual, L_failed); + + // It is safe to examine both src.length and dst.length. +#ifndef _WIN64 + arraycopy_range_checks(src, src_pos, dst, dst_pos, C_RARG4, + rax, L_failed); +#else + __ movl(r11_length, C_RARG4); // reload + arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, + rax, L_failed); + __ movl(r11_dst_klass, dst_klass_addr); // reload +#endif + + // Marshal the base address arguments now, freeing registers. + __ leaq(from, Address(src, src_pos, Address::times_8, + arrayOopDesc::base_offset_in_bytes(T_OBJECT))); + __ leaq(to, Address(dst, dst_pos, Address::times_8, + arrayOopDesc::base_offset_in_bytes(T_OBJECT))); + __ movl(count, C_RARG4); // length (reloaded) + Register sco_temp = c_rarg3; // this register is free now + assert_different_registers(from, to, count, sco_temp, + r11_dst_klass, r10_src_klass); + assert_clean_int(count, sco_temp); + + // Generate the type check. + int sco_offset = (klassOopDesc::header_size() * HeapWordSize + + Klass::super_check_offset_offset_in_bytes()); + __ movl(sco_temp, Address(r11_dst_klass, sco_offset)); + assert_clean_int(sco_temp, rax); + generate_type_check(r10_src_klass, sco_temp, r11_dst_klass, L_plain_copy); + + // Fetch destination element klass from the objArrayKlass header. + int ek_offset = (klassOopDesc::header_size() * HeapWordSize + + objArrayKlass::element_klass_offset_in_bytes()); + __ movq(r11_dst_klass, Address(r11_dst_klass, ek_offset)); + __ movl(sco_temp, Address(r11_dst_klass, sco_offset)); + assert_clean_int(sco_temp, rax); + + // the checkcast_copy loop needs two extra arguments: + assert(c_rarg3 == sco_temp, "#3 already in place"); + __ movq(C_RARG4, r11_dst_klass); // dst.klass.element_klass + __ jump(RuntimeAddress(checkcast_copy_entry)); + } + + __ BIND(L_failed); + __ xorq(rax, rax); + __ notq(rax); // return -1 + __ leave(); // required for proper stackwalking of RuntimeStub frame + __ ret(0); + + return start; + } + +#undef length_arg + + void generate_arraycopy_stubs() { + // Call the conjoint generation methods immediately after + // the disjoint ones so that short branches from the former + // to the latter can be generated. + StubRoutines::_jbyte_disjoint_arraycopy = generate_disjoint_byte_copy(false, "jbyte_disjoint_arraycopy"); + StubRoutines::_jbyte_arraycopy = generate_conjoint_byte_copy(false, "jbyte_arraycopy"); + + StubRoutines::_jshort_disjoint_arraycopy = generate_disjoint_short_copy(false, "jshort_disjoint_arraycopy"); + StubRoutines::_jshort_arraycopy = generate_conjoint_short_copy(false, "jshort_arraycopy"); + + StubRoutines::_jint_disjoint_arraycopy = generate_disjoint_int_copy(false, "jint_disjoint_arraycopy"); + StubRoutines::_jint_arraycopy = generate_conjoint_int_copy(false, "jint_arraycopy"); + + StubRoutines::_jlong_disjoint_arraycopy = generate_disjoint_long_oop_copy(false, false, "jlong_disjoint_arraycopy"); + StubRoutines::_jlong_arraycopy = generate_conjoint_long_oop_copy(false, false, "jlong_arraycopy"); + + StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_long_oop_copy(false, true, "oop_disjoint_arraycopy"); + StubRoutines::_oop_arraycopy = generate_conjoint_long_oop_copy(false, true, "oop_arraycopy"); + + StubRoutines::_checkcast_arraycopy = generate_checkcast_copy("checkcast_arraycopy"); + StubRoutines::_unsafe_arraycopy = generate_unsafe_copy("unsafe_arraycopy"); + StubRoutines::_generic_arraycopy = generate_generic_copy("generic_arraycopy"); + + // We don't generate specialized code for HeapWord-aligned source + // arrays, so just use the code we've already generated + StubRoutines::_arrayof_jbyte_disjoint_arraycopy = StubRoutines::_jbyte_disjoint_arraycopy; + StubRoutines::_arrayof_jbyte_arraycopy = StubRoutines::_jbyte_arraycopy; + + StubRoutines::_arrayof_jshort_disjoint_arraycopy = StubRoutines::_jshort_disjoint_arraycopy; + StubRoutines::_arrayof_jshort_arraycopy = StubRoutines::_jshort_arraycopy; + + StubRoutines::_arrayof_jint_disjoint_arraycopy = StubRoutines::_jint_disjoint_arraycopy; + StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy; + + StubRoutines::_arrayof_jlong_disjoint_arraycopy = StubRoutines::_jlong_disjoint_arraycopy; + StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy; + + StubRoutines::_arrayof_oop_disjoint_arraycopy = StubRoutines::_oop_disjoint_arraycopy; + StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy; + } + +#undef __ +#define __ masm-> + + // Continuation point for throwing of implicit exceptions that are + // not handled in the current activation. Fabricates an exception + // oop and initiates normal exception dispatching in this + // frame. Since we need to preserve callee-saved values (currently + // only for C2, but done for C1 as well) we need a callee-saved oop + // map and therefore have to make these stubs into RuntimeStubs + // rather than BufferBlobs. If the compiler needs all registers to + // be preserved between the fault point and the exception handler + // then it must assume responsibility for that in + // AbstractCompiler::continuation_for_implicit_null_exception or + // continuation_for_implicit_division_by_zero_exception. All other + // implicit exceptions (e.g., NullPointerException or + // AbstractMethodError on entry) are either at call sites or + // otherwise assume that stack unwinding will be initiated, so + // caller saved registers were assumed volatile in the compiler. + address generate_throw_exception(const char* name, + address runtime_entry, + bool restore_saved_exception_pc) { + // Information about frame layout at time of blocking runtime call. + // Note that we only have to preserve callee-saved registers since + // the compilers are responsible for supplying a continuation point + // if they expect all registers to be preserved. + enum layout { + rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt, + rbp_off2, + return_off, + return_off2, + framesize // inclusive of return address + }; + + int insts_size = 512; + int locs_size = 64; + + CodeBuffer code(name, insts_size, locs_size); + OopMapSet* oop_maps = new OopMapSet(); + MacroAssembler* masm = new MacroAssembler(&code); + + address start = __ pc(); + + // This is an inlined and slightly modified version of call_VM + // which has the ability to fetch the return PC out of + // thread-local storage and also sets up last_Java_sp slightly + // differently than the real call_VM + if (restore_saved_exception_pc) { + __ movq(rax, + Address(r15_thread, + in_bytes(JavaThread::saved_exception_pc_offset()))); + __ pushq(rax); + } + + __ enter(); // required for proper stackwalking of RuntimeStub frame + + assert(is_even(framesize/2), "sp not 16-byte aligned"); + + // return address and rbp are already in place + __ subq(rsp, (framesize-4) << LogBytesPerInt); // prolog + + int frame_complete = __ pc() - start; + + // Set up last_Java_sp and last_Java_fp + __ set_last_Java_frame(rsp, rbp, NULL); + + // Call runtime + __ movq(c_rarg0, r15_thread); + BLOCK_COMMENT("call runtime_entry"); + __ call(RuntimeAddress(runtime_entry)); + + // Generate oop map + OopMap* map = new OopMap(framesize, 0); + + oop_maps->add_gc_map(__ pc() - start, map); + + __ reset_last_Java_frame(true, false); + + __ leave(); // required for proper stackwalking of RuntimeStub frame + + // check for pending exceptions +#ifdef ASSERT + Label L; + __ cmpq(Address(r15_thread, Thread::pending_exception_offset()), + (int) NULL); + __ jcc(Assembler::notEqual, L); + __ should_not_reach_here(); + __ bind(L); +#endif // ASSERT + __ jump(RuntimeAddress(StubRoutines::forward_exception_entry())); + + + // codeBlob framesize is in words (not VMRegImpl::slot_size) + RuntimeStub* stub = + RuntimeStub::new_runtime_stub(name, + &code, + frame_complete, + (framesize >> (LogBytesPerWord - LogBytesPerInt)), + oop_maps, false); + return stub->entry_point(); + } + + // Initialization + void generate_initial() { + // Generates all stubs and initializes the entry points + + // This platform-specific stub is needed by generate_call_stub() + StubRoutines::amd64::_mxcsr_std = generate_fp_mask("mxcsr_std", 0x0000000000001F80); + + // entry points that exist in all platforms Note: This is code + // that could be shared among different platforms - however the + // benefit seems to be smaller than the disadvantage of having a + // much more complicated generator structure. See also comment in + // stubRoutines.hpp. + + StubRoutines::_forward_exception_entry = generate_forward_exception(); + + StubRoutines::_call_stub_entry = + generate_call_stub(StubRoutines::_call_stub_return_address); + + // is referenced by megamorphic call + StubRoutines::_catch_exception_entry = generate_catch_exception(); + + // atomic calls + StubRoutines::_atomic_xchg_entry = generate_atomic_xchg(); + StubRoutines::_atomic_xchg_ptr_entry = generate_atomic_xchg_ptr(); + StubRoutines::_atomic_cmpxchg_entry = generate_atomic_cmpxchg(); + StubRoutines::_atomic_cmpxchg_long_entry = generate_atomic_cmpxchg_long(); + StubRoutines::_atomic_add_entry = generate_atomic_add(); + StubRoutines::_atomic_add_ptr_entry = generate_atomic_add_ptr(); + StubRoutines::_fence_entry = generate_orderaccess_fence(); + + StubRoutines::_handler_for_unsafe_access_entry = + generate_handler_for_unsafe_access(); + + // platform dependent + StubRoutines::amd64::_get_previous_fp_entry = generate_get_previous_fp(); + + StubRoutines::amd64::_verify_mxcsr_entry = generate_verify_mxcsr(); + } + + void generate_all() { + // Generates all stubs and initializes the entry points + + // These entry points require SharedInfo::stack0 to be set up in + // non-core builds and need to be relocatable, so they each + // fabricate a RuntimeStub internally. + StubRoutines::_throw_AbstractMethodError_entry = + generate_throw_exception("AbstractMethodError throw_exception", + CAST_FROM_FN_PTR(address, + SharedRuntime:: + throw_AbstractMethodError), + false); + + StubRoutines::_throw_ArithmeticException_entry = + generate_throw_exception("ArithmeticException throw_exception", + CAST_FROM_FN_PTR(address, + SharedRuntime:: + throw_ArithmeticException), + true); + + StubRoutines::_throw_NullPointerException_entry = + generate_throw_exception("NullPointerException throw_exception", + CAST_FROM_FN_PTR(address, + SharedRuntime:: + throw_NullPointerException), + true); + + StubRoutines::_throw_NullPointerException_at_call_entry = + generate_throw_exception("NullPointerException at call throw_exception", + CAST_FROM_FN_PTR(address, + SharedRuntime:: + throw_NullPointerException_at_call), + false); + + StubRoutines::_throw_StackOverflowError_entry = + generate_throw_exception("StackOverflowError throw_exception", + CAST_FROM_FN_PTR(address, + SharedRuntime:: + throw_StackOverflowError), + false); + + // entry points that are platform specific + StubRoutines::amd64::_f2i_fixup = generate_f2i_fixup(); + StubRoutines::amd64::_f2l_fixup = generate_f2l_fixup(); + StubRoutines::amd64::_d2i_fixup = generate_d2i_fixup(); + StubRoutines::amd64::_d2l_fixup = generate_d2l_fixup(); + + StubRoutines::amd64::_float_sign_mask = generate_fp_mask("float_sign_mask", 0x7FFFFFFF7FFFFFFF); + StubRoutines::amd64::_float_sign_flip = generate_fp_mask("float_sign_flip", 0x8000000080000000); + StubRoutines::amd64::_double_sign_mask = generate_fp_mask("double_sign_mask", 0x7FFFFFFFFFFFFFFF); + StubRoutines::amd64::_double_sign_flip = generate_fp_mask("double_sign_flip", 0x8000000000000000); + + // support for verify_oop (must happen after universe_init) + StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop(); + + // arraycopy stubs used by compilers + generate_arraycopy_stubs(); + } + + public: + StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) { + if (all) { + generate_all(); + } else { + generate_initial(); + } + } +}; // end class declaration + +address StubGenerator::disjoint_byte_copy_entry = NULL; +address StubGenerator::disjoint_short_copy_entry = NULL; +address StubGenerator::disjoint_int_copy_entry = NULL; +address StubGenerator::disjoint_long_copy_entry = NULL; +address StubGenerator::disjoint_oop_copy_entry = NULL; + +address StubGenerator::byte_copy_entry = NULL; +address StubGenerator::short_copy_entry = NULL; +address StubGenerator::int_copy_entry = NULL; +address StubGenerator::long_copy_entry = NULL; +address StubGenerator::oop_copy_entry = NULL; + +address StubGenerator::checkcast_copy_entry = NULL; + +void StubGenerator_generate(CodeBuffer* code, bool all) { + StubGenerator g(code, all); +}