Mercurial > hg > graal-compiler
view src/cpu/x86/vm/nativeInst_x86.cpp @ 18217:0b5aff6214b9
Truffle: checkstyle fixes.
author | Christian Humer <christian.humer@gmail.com> |
---|---|
date | Fri, 31 Oct 2014 00:27:14 +0100 |
parents | 52b4284cb496 |
children | be896a1983c0 |
line wrap: on
line source
/* * Copyright (c) 1997, 2014, Oracle and/or its affiliates. All rights reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. * */ #include "precompiled.hpp" #include "asm/macroAssembler.hpp" #include "memory/resourceArea.hpp" #include "nativeInst_x86.hpp" #include "oops/oop.inline.hpp" #include "runtime/handles.hpp" #include "runtime/sharedRuntime.hpp" #include "runtime/stubRoutines.hpp" #include "utilities/ostream.hpp" #ifdef COMPILER1 #include "c1/c1_Runtime1.hpp" #endif PRAGMA_FORMAT_MUTE_WARNINGS_FOR_GCC void NativeInstruction::wrote(int offset) { ICache::invalidate_word(addr_at(offset)); } void NativeCall::verify() { // Make sure code pattern is actually a call imm32 instruction. int inst = ubyte_at(0); if (inst != instruction_code) { tty->print_cr("Addr: " INTPTR_FORMAT " Code: 0x%x", instruction_address(), inst); fatal("not a call disp32"); } } address NativeCall::destination() const { // Getting the destination of a call isn't safe because that call can // be getting patched while you're calling this. There's only special // places where this can be called but not automatically verifiable by // checking which locks are held. The solution is true atomic patching // on x86, nyi. return return_address() + displacement(); } void NativeCall::print() { tty->print_cr(PTR_FORMAT ": call " PTR_FORMAT, instruction_address(), destination()); } // Inserts a native call instruction at a given pc void NativeCall::insert(address code_pos, address entry) { intptr_t disp = (intptr_t)entry - ((intptr_t)code_pos + 1 + 4); #ifdef AMD64 guarantee(disp == (intptr_t)(jint)disp, "must be 32-bit offset"); #endif // AMD64 *code_pos = instruction_code; *((int32_t *)(code_pos+1)) = (int32_t) disp; ICache::invalidate_range(code_pos, instruction_size); } // MT-safe patching of a call instruction. // First patches first word of instruction to two jmp's that jmps to them // selfs (spinlock). Then patches the last byte, and then atomicly replaces // the jmp's with the first 4 byte of the new instruction. void NativeCall::replace_mt_safe(address instr_addr, address code_buffer) { assert(Patching_lock->is_locked() || SafepointSynchronize::is_at_safepoint(), "concurrent code patching"); assert (instr_addr != NULL, "illegal address for code patching"); NativeCall* n_call = nativeCall_at (instr_addr); // checking that it is a call if (os::is_MP()) { guarantee((intptr_t)instr_addr % BytesPerWord == 0, "must be aligned"); } // First patch dummy jmp in place unsigned char patch[4]; assert(sizeof(patch)==sizeof(jint), "sanity check"); patch[0] = 0xEB; // jmp rel8 patch[1] = 0xFE; // jmp to self patch[2] = 0xEB; patch[3] = 0xFE; // First patch dummy jmp in place *(jint*)instr_addr = *(jint *)patch; // Invalidate. Opteron requires a flush after every write. n_call->wrote(0); // Patch 4th byte instr_addr[4] = code_buffer[4]; n_call->wrote(4); // Patch bytes 0-3 *(jint*)instr_addr = *(jint *)code_buffer; n_call->wrote(0); #ifdef ASSERT // verify patching for ( int i = 0; i < instruction_size; i++) { address ptr = (address)((intptr_t)code_buffer + i); int a_byte = (*ptr) & 0xFF; assert(*((address)((intptr_t)instr_addr + i)) == a_byte, "mt safe patching failed"); } #endif } // Similar to replace_mt_safe, but just changes the destination. The // important thing is that free-running threads are able to execute this // call instruction at all times. If the displacement field is aligned // we can simply rely on atomicity of 32-bit writes to make sure other threads // will see no intermediate states. Otherwise, the first two bytes of the // call are guaranteed to be aligned, and can be atomically patched to a // self-loop to guard the instruction while we change the other bytes. // We cannot rely on locks here, since the free-running threads must run at // full speed. // // Used in the runtime linkage of calls; see class CompiledIC. // (Cf. 4506997 and 4479829, where threads witnessed garbage displacements.) void NativeCall::set_destination_mt_safe(address dest) { debug_only(verify()); // Make sure patching code is locked. No two threads can patch at the same // time but one may be executing this code. assert(Patching_lock->is_locked() || SafepointSynchronize::is_at_safepoint(), "concurrent code patching"); // Both C1 and C2 should now be generating code which aligns the patched address // to be within a single cache line except that C1 does not do the alignment on // uniprocessor systems. bool is_aligned = ((uintptr_t)displacement_address() + 0) / cache_line_size == ((uintptr_t)displacement_address() + 3) / cache_line_size; guarantee(!os::is_MP() || is_aligned, "destination must be aligned"); if (is_aligned) { // Simple case: The destination lies within a single cache line. set_destination(dest); } else if ((uintptr_t)instruction_address() / cache_line_size == ((uintptr_t)instruction_address()+1) / cache_line_size) { // Tricky case: The instruction prefix lies within a single cache line. intptr_t disp = dest - return_address(); #ifdef AMD64 guarantee(disp == (intptr_t)(jint)disp, "must be 32-bit offset"); #endif // AMD64 int call_opcode = instruction_address()[0]; // First patch dummy jump in place: { u_char patch_jump[2]; patch_jump[0] = 0xEB; // jmp rel8 patch_jump[1] = 0xFE; // jmp to self assert(sizeof(patch_jump)==sizeof(short), "sanity check"); *(short*)instruction_address() = *(short*)patch_jump; } // Invalidate. Opteron requires a flush after every write. wrote(0); // (Note: We assume any reader which has already started to read // the unpatched call will completely read the whole unpatched call // without seeing the next writes we are about to make.) // Next, patch the last three bytes: u_char patch_disp[5]; patch_disp[0] = call_opcode; *(int32_t*)&patch_disp[1] = (int32_t)disp; assert(sizeof(patch_disp)==instruction_size, "sanity check"); for (int i = sizeof(short); i < instruction_size; i++) instruction_address()[i] = patch_disp[i]; // Invalidate. Opteron requires a flush after every write. wrote(sizeof(short)); // (Note: We assume that any reader which reads the opcode we are // about to repatch will also read the writes we just made.) // Finally, overwrite the jump: *(short*)instruction_address() = *(short*)patch_disp; // Invalidate. Opteron requires a flush after every write. wrote(0); debug_only(verify()); guarantee(destination() == dest, "patch succeeded"); } else { // Impossible: One or the other must be atomically writable. ShouldNotReachHere(); } } void NativeMovConstReg::verify() { #ifdef AMD64 // make sure code pattern is actually a mov reg64, imm64 instruction if ((ubyte_at(0) != Assembler::REX_W && ubyte_at(0) != Assembler::REX_WB) || (ubyte_at(1) & (0xff ^ register_mask)) != 0xB8) { print(); fatal("not a REX.W[B] mov reg64, imm64"); } #else // make sure code pattern is actually a mov reg, imm32 instruction u_char test_byte = *(u_char*)instruction_address(); u_char test_byte_2 = test_byte & ( 0xff ^ register_mask); if (test_byte_2 != instruction_code) fatal("not a mov reg, imm32"); #endif // AMD64 } void NativeMovConstReg::print() { tty->print_cr(PTR_FORMAT ": mov reg, " INTPTR_FORMAT, instruction_address(), data()); } //------------------------------------------------------------------- int NativeMovRegMem::instruction_start() const { int off = 0; u_char instr_0 = ubyte_at(off); // See comment in Assembler::locate_operand() about VEX prefixes. if (instr_0 == instruction_VEX_prefix_2bytes) { assert((UseAVX > 0), "shouldn't have VEX prefix"); NOT_LP64(assert((0xC0 & ubyte_at(1)) == 0xC0, "shouldn't have LDS and LES instructions")); return 2; } if (instr_0 == instruction_VEX_prefix_3bytes) { assert((UseAVX > 0), "shouldn't have VEX prefix"); NOT_LP64(assert((0xC0 & ubyte_at(1)) == 0xC0, "shouldn't have LDS and LES instructions")); return 3; } // First check to see if we have a (prefixed or not) xor if (instr_0 >= instruction_prefix_wide_lo && // 0x40 instr_0 <= instruction_prefix_wide_hi) { // 0x4f off++; instr_0 = ubyte_at(off); } if (instr_0 == instruction_code_xor) { off += 2; instr_0 = ubyte_at(off); } // Now look for the real instruction and the many prefix/size specifiers. if (instr_0 == instruction_operandsize_prefix ) { // 0x66 off++; // Not SSE instructions instr_0 = ubyte_at(off); } if ( instr_0 == instruction_code_xmm_ss_prefix || // 0xf3 instr_0 == instruction_code_xmm_sd_prefix) { // 0xf2 off++; instr_0 = ubyte_at(off); } if ( instr_0 >= instruction_prefix_wide_lo && // 0x40 instr_0 <= instruction_prefix_wide_hi) { // 0x4f off++; instr_0 = ubyte_at(off); } if (instr_0 == instruction_extended_prefix ) { // 0x0f off++; } return off; } address NativeMovRegMem::instruction_address() const { return addr_at(instruction_start()); } address NativeMovRegMem::next_instruction_address() const { address ret = instruction_address() + instruction_size; u_char instr_0 = *(u_char*) instruction_address(); switch (instr_0) { case instruction_operandsize_prefix: fatal("should have skipped instruction_operandsize_prefix"); break; case instruction_extended_prefix: fatal("should have skipped instruction_extended_prefix"); break; case instruction_code_mem2reg_movslq: // 0x63 case instruction_code_mem2reg_movzxb: // 0xB6 case instruction_code_mem2reg_movsxb: // 0xBE case instruction_code_mem2reg_movzxw: // 0xB7 case instruction_code_mem2reg_movsxw: // 0xBF case instruction_code_reg2mem: // 0x89 (q/l) case instruction_code_mem2reg: // 0x8B (q/l) case instruction_code_reg2memb: // 0x88 case instruction_code_mem2regb: // 0x8a case instruction_code_float_s: // 0xd9 fld_s a case instruction_code_float_d: // 0xdd fld_d a case instruction_code_xmm_load: // 0x10 case instruction_code_xmm_store: // 0x11 case instruction_code_xmm_lpd: // 0x12 { // If there is an SIB then instruction is longer than expected u_char mod_rm = *(u_char*)(instruction_address() + 1); if ((mod_rm & 7) == 0x4) { ret++; } } case instruction_code_xor: fatal("should have skipped xor lead in"); break; default: fatal("not a NativeMovRegMem"); } return ret; } int NativeMovRegMem::offset() const{ int off = data_offset + instruction_start(); u_char mod_rm = *(u_char*)(instruction_address() + 1); // nnnn(r12|rsp) isn't coded as simple mod/rm since that is // the encoding to use an SIB byte. Which will have the nnnn // field off by one byte if ((mod_rm & 7) == 0x4) { off++; } return int_at(off); } void NativeMovRegMem::set_offset(int x) { int off = data_offset + instruction_start(); u_char mod_rm = *(u_char*)(instruction_address() + 1); // nnnn(r12|rsp) isn't coded as simple mod/rm since that is // the encoding to use an SIB byte. Which will have the nnnn // field off by one byte if ((mod_rm & 7) == 0x4) { off++; } set_int_at(off, x); } void NativeMovRegMem::verify() { // make sure code pattern is actually a mov [reg+offset], reg instruction u_char test_byte = *(u_char*)instruction_address(); switch (test_byte) { case instruction_code_reg2memb: // 0x88 movb a, r case instruction_code_reg2mem: // 0x89 movl a, r (can be movq in 64bit) case instruction_code_mem2regb: // 0x8a movb r, a case instruction_code_mem2reg: // 0x8b movl r, a (can be movq in 64bit) break; case instruction_code_mem2reg_movslq: // 0x63 movsql r, a case instruction_code_mem2reg_movzxb: // 0xb6 movzbl r, a (movzxb) case instruction_code_mem2reg_movzxw: // 0xb7 movzwl r, a (movzxw) case instruction_code_mem2reg_movsxb: // 0xbe movsbl r, a (movsxb) case instruction_code_mem2reg_movsxw: // 0xbf movswl r, a (movsxw) break; case instruction_code_float_s: // 0xd9 fld_s a case instruction_code_float_d: // 0xdd fld_d a case instruction_code_xmm_load: // 0x10 movsd xmm, a case instruction_code_xmm_store: // 0x11 movsd a, xmm case instruction_code_xmm_lpd: // 0x12 movlpd xmm, a break; default: fatal ("not a mov [reg+offs], reg instruction"); } } void NativeMovRegMem::print() { tty->print_cr("0x%x: mov reg, [reg + %x]", instruction_address(), offset()); } //------------------------------------------------------------------- void NativeLoadAddress::verify() { // make sure code pattern is actually a mov [reg+offset], reg instruction u_char test_byte = *(u_char*)instruction_address(); #ifdef _LP64 if ( (test_byte == instruction_prefix_wide || test_byte == instruction_prefix_wide_extended) ) { test_byte = *(u_char*)(instruction_address() + 1); } #endif // _LP64 if ( ! ((test_byte == lea_instruction_code) LP64_ONLY(|| (test_byte == mov64_instruction_code) ))) { fatal ("not a lea reg, [reg+offs] instruction"); } } void NativeLoadAddress::print() { tty->print_cr("0x%x: lea [reg + %x], reg", instruction_address(), offset()); } //-------------------------------------------------------------------------------- void NativeJump::verify() { if (*(u_char*)instruction_address() != instruction_code) { fatal("not a jump instruction"); } } void NativeJump::insert(address code_pos, address entry) { intptr_t disp = (intptr_t)entry - ((intptr_t)code_pos + 1 + 4); #ifdef AMD64 guarantee(disp == (intptr_t)(int32_t)disp, "must be 32-bit offset"); #endif // AMD64 *code_pos = instruction_code; *((int32_t*)(code_pos + 1)) = (int32_t)disp; ICache::invalidate_range(code_pos, instruction_size); } void NativeJump::check_verified_entry_alignment(address entry, address verified_entry) { // Patching to not_entrant can happen while activations of the method are // in use. The patching in that instance must happen only when certain // alignment restrictions are true. These guarantees check those // conditions. #ifdef AMD64 const int linesize = 64; #else const int linesize = 32; #endif // AMD64 // Must be wordSize aligned guarantee(((uintptr_t) verified_entry & (wordSize -1)) == 0, "illegal address for code patching 2"); // First 5 bytes must be within the same cache line - 4827828 guarantee((uintptr_t) verified_entry / linesize == ((uintptr_t) verified_entry + 4) / linesize, "illegal address for code patching 3"); } // MT safe inserting of a jump over an unknown instruction sequence (used by nmethod::makeZombie) // The problem: jmp <dest> is a 5-byte instruction. Atomical write can be only with 4 bytes. // First patches the first word atomically to be a jump to itself. // Then patches the last byte and then atomically patches the first word (4-bytes), // thus inserting the desired jump // This code is mt-safe with the following conditions: entry point is 4 byte aligned, // entry point is in same cache line as unverified entry point, and the instruction being // patched is >= 5 byte (size of patch). // // In C2 the 5+ byte sized instruction is enforced by code in MachPrologNode::emit. // In C1 the restriction is enforced by CodeEmitter::method_entry // In Graal, the restriction is enforced by HotSpotFrameContext.enter(...) // void NativeJump::patch_verified_entry(address entry, address verified_entry, address dest) { // complete jump instruction (to be inserted) is in code_buffer; unsigned char code_buffer[5]; code_buffer[0] = instruction_code; intptr_t disp = (intptr_t)dest - ((intptr_t)verified_entry + 1 + 4); #ifdef AMD64 guarantee(disp == (intptr_t)(int32_t)disp, "must be 32-bit offset"); #endif // AMD64 *(int32_t*)(code_buffer + 1) = (int32_t)disp; check_verified_entry_alignment(entry, verified_entry); // Can't call nativeJump_at() because it's asserts jump exists NativeJump* n_jump = (NativeJump*) verified_entry; //First patch dummy jmp in place unsigned char patch[4]; assert(sizeof(patch)==sizeof(int32_t), "sanity check"); patch[0] = 0xEB; // jmp rel8 patch[1] = 0xFE; // jmp to self patch[2] = 0xEB; patch[3] = 0xFE; // First patch dummy jmp in place *(int32_t*)verified_entry = *(int32_t *)patch; n_jump->wrote(0); // Patch 5th byte (from jump instruction) verified_entry[4] = code_buffer[4]; n_jump->wrote(4); // Patch bytes 0-3 (from jump instruction) *(int32_t*)verified_entry = *(int32_t *)code_buffer; // Invalidate. Opteron requires a flush after every write. n_jump->wrote(0); } void NativePopReg::insert(address code_pos, Register reg) { assert(reg->encoding() < 8, "no space for REX"); assert(NativePopReg::instruction_size == sizeof(char), "right address unit for update"); *code_pos = (u_char)(instruction_code | reg->encoding()); ICache::invalidate_range(code_pos, instruction_size); } void NativeIllegalInstruction::insert(address code_pos) { assert(NativeIllegalInstruction::instruction_size == sizeof(short), "right address unit for update"); *(short *)code_pos = instruction_code; ICache::invalidate_range(code_pos, instruction_size); } void NativeGeneralJump::verify() { assert(((NativeInstruction *)this)->is_jump() || ((NativeInstruction *)this)->is_cond_jump(), "not a general jump instruction"); } void NativeGeneralJump::insert_unconditional(address code_pos, address entry) { intptr_t disp = (intptr_t)entry - ((intptr_t)code_pos + 1 + 4); #ifdef AMD64 guarantee(disp == (intptr_t)(int32_t)disp, "must be 32-bit offset"); #endif // AMD64 *code_pos = unconditional_long_jump; *((int32_t *)(code_pos+1)) = (int32_t) disp; ICache::invalidate_range(code_pos, instruction_size); } // MT-safe patching of a long jump instruction. // First patches first word of instruction to two jmp's that jmps to them // selfs (spinlock). Then patches the last byte, and then atomicly replaces // the jmp's with the first 4 byte of the new instruction. void NativeGeneralJump::replace_mt_safe(address instr_addr, address code_buffer) { assert (instr_addr != NULL, "illegal address for code patching (4)"); NativeGeneralJump* n_jump = nativeGeneralJump_at (instr_addr); // checking that it is a jump // Temporary code unsigned char patch[4]; assert(sizeof(patch)==sizeof(int32_t), "sanity check"); patch[0] = 0xEB; // jmp rel8 patch[1] = 0xFE; // jmp to self patch[2] = 0xEB; patch[3] = 0xFE; // First patch dummy jmp in place *(int32_t*)instr_addr = *(int32_t *)patch; n_jump->wrote(0); // Patch 4th byte instr_addr[4] = code_buffer[4]; n_jump->wrote(4); // Patch bytes 0-3 *(jint*)instr_addr = *(jint *)code_buffer; n_jump->wrote(0); #ifdef ASSERT // verify patching for ( int i = 0; i < instruction_size; i++) { address ptr = (address)((intptr_t)code_buffer + i); int a_byte = (*ptr) & 0xFF; assert(*((address)((intptr_t)instr_addr + i)) == a_byte, "mt safe patching failed"); } #endif } address NativeGeneralJump::jump_destination() const { int op_code = ubyte_at(0); bool is_rel32off = (op_code == 0xE9 || op_code == 0x0F); int offset = (op_code == 0x0F) ? 2 : 1; int length = offset + ((is_rel32off) ? 4 : 1); if (is_rel32off) return addr_at(0) + length + int_at(offset); else return addr_at(0) + length + sbyte_at(offset); } bool NativeInstruction::is_dtrace_trap() { return (*(int32_t*)this & 0xff) == 0xcc; }