Mercurial > hg > graal-compiler
view src/share/vm/code/compiledIC.hpp @ 2149:7e37af9d69ef
7011379: G1: overly long concurrent marking cycles
Summary: This changeset introduces filtering of SATB buffers at the point when they are about to be enqueued. If this filtering clears enough entries on each buffer, the buffer can then be re-used and not enqueued. This cuts down the number of SATB buffers that need to be processed by the concurrent marking threads.
Reviewed-by: johnc, ysr
author | tonyp |
---|---|
date | Wed, 19 Jan 2011 09:35:17 -0500 |
parents | f95d63e2154a |
children | b92c45f2bc75 |
line wrap: on
line source
/* * Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. * */ #ifndef SHARE_VM_CODE_COMPILEDIC_HPP #define SHARE_VM_CODE_COMPILEDIC_HPP #include "interpreter/linkResolver.hpp" #include "oops/compiledICHolderKlass.hpp" #include "oops/compiledICHolderOop.hpp" #include "oops/klassOop.hpp" #ifdef TARGET_ARCH_x86 # include "nativeInst_x86.hpp" #endif #ifdef TARGET_ARCH_sparc # include "nativeInst_sparc.hpp" #endif #ifdef TARGET_ARCH_zero # include "nativeInst_zero.hpp" #endif //----------------------------------------------------------------------------- // The CompiledIC represents a compiled inline cache. // // In order to make patching of the inline cache MT-safe, we only allow the following // transitions (when not at a safepoint): // // // [1] --<-- Clean -->--- [1] // / (null) \ // / \ /-<-\ // / [2] \ / \ // Interpreted ---------> Monomorphic | [3] // (compiledICHolderOop) (klassOop) | // \ / \ / // [4] \ / [4] \->-/ // \->- Megamorphic -<-/ // (methodOop) // // The text in paranteses () refere to the value of the inline cache receiver (mov instruction) // // The numbers in square brackets refere to the kind of transition: // [1]: Initial fixup. Receiver it found from debug information // [2]: Compilation of a method // [3]: Recompilation of a method (note: only entry is changed. The klassOop must stay the same) // [4]: Inline cache miss. We go directly to megamorphic call. // // The class automatically inserts transition stubs (using the InlineCacheBuffer) when an MT-unsafe // transition is made to a stub. // class CompiledIC; class CompiledICInfo { friend class CompiledIC; private: address _entry; // entry point for call Handle _cached_oop; // Value of cached_oop (either in stub or inline cache) bool _is_optimized; // it is an optimized virtual call (i.e., can be statically bound) bool _to_interpreter; // Call it to interpreter public: address entry() const { return _entry; } Handle cached_oop() const { return _cached_oop; } bool is_optimized() const { return _is_optimized; } }; class CompiledIC: public ResourceObj { friend class InlineCacheBuffer; friend class ICStub; private: NativeCall* _ic_call; // the call instruction oop* _oop_addr; // patchable oop cell for this IC RelocIterator _oops; // iteration over any and all set-oop instructions bool _is_optimized; // an optimized virtual call (i.e., no compiled IC) CompiledIC(NativeCall* ic_call); CompiledIC(Relocation* ic_reloc); // Must be of virtual_call_type/opt_virtual_call_type // low-level inline-cache manipulation. Cannot be accessed directly, since it might not be MT-safe // to change an inline-cache. These changes the underlying inline-cache directly. They *newer* make // changes to a transition stub. void set_ic_destination(address entry_point); void set_cached_oop(oop cache); // Reads the location of the transition stub. This will fail with an assertion, if no transition stub is // associated with the inline cache. address stub_address() const; bool is_in_transition_state() const; // Use InlineCacheBuffer public: // conversion (machine PC to CompiledIC*) friend CompiledIC* CompiledIC_before(address return_addr); friend CompiledIC* CompiledIC_at(address call_site); friend CompiledIC* CompiledIC_at(Relocation* call_site); // Return the cached_oop/destination associated with this inline cache. If the cache currently points // to a transition stub, it will read the values from the transition stub. oop cached_oop() const; address ic_destination() const; bool is_optimized() const { return _is_optimized; } // State bool is_clean() const; bool is_megamorphic() const; bool is_call_to_compiled() const; bool is_call_to_interpreted() const; address end_of_call() { return _ic_call->return_address(); } // MT-safe patching of inline caches. Note: Only safe to call is_xxx when holding the CompiledIC_ock // so you are guaranteed that no patching takes place. The same goes for verify. // // Note: We do not provide any direct access to the stub code, to prevent parts of the code // to manipulate the inline cache in MT-unsafe ways. // // They all takes a TRAP argument, since they can cause a GC if the inline-cache buffer is full. // void set_to_clean(); // Can only be called during a safepoint operation void set_to_monomorphic(const CompiledICInfo& info); void set_to_megamorphic(CallInfo* call_info, Bytecodes::Code bytecode, TRAPS); static void compute_monomorphic_entry(methodHandle method, KlassHandle receiver_klass, bool is_optimized, bool static_bound, CompiledICInfo& info, TRAPS); // Location address instruction_address() const { return _ic_call->instruction_address(); } // Misc void print() PRODUCT_RETURN; void print_compiled_ic() PRODUCT_RETURN; void verify() PRODUCT_RETURN; }; inline CompiledIC* CompiledIC_before(address return_addr) { CompiledIC* c_ic = new CompiledIC(nativeCall_before(return_addr)); c_ic->verify(); return c_ic; } inline CompiledIC* CompiledIC_at(address call_site) { CompiledIC* c_ic = new CompiledIC(nativeCall_at(call_site)); c_ic->verify(); return c_ic; } inline CompiledIC* CompiledIC_at(Relocation* call_site) { CompiledIC* c_ic = new CompiledIC(call_site); c_ic->verify(); return c_ic; } //----------------------------------------------------------------------------- // The CompiledStaticCall represents a call to a static method in the compiled // // Transition diagram of a static call site is somewhat simpler than for an inlined cache: // // // -----<----- Clean ----->----- // / \ // / \ // compilled code <------------> interpreted code // // Clean: Calls directly to runtime method for fixup // Compiled code: Calls directly to compiled code // Interpreted code: Calls to stub that set methodOop reference // // class CompiledStaticCall; class StaticCallInfo { private: address _entry; // Entrypoint methodHandle _callee; // Callee (used when calling interpreter) bool _to_interpreter; // call to interpreted method (otherwise compiled) friend class CompiledStaticCall; public: address entry() const { return _entry; } methodHandle callee() const { return _callee; } }; class CompiledStaticCall: public NativeCall { friend class CompiledIC; // Also used by CompiledIC void set_to_interpreted(methodHandle callee, address entry); bool is_optimized_virtual(); public: friend CompiledStaticCall* compiledStaticCall_before(address return_addr); friend CompiledStaticCall* compiledStaticCall_at(address native_call); friend CompiledStaticCall* compiledStaticCall_at(Relocation* call_site); // State bool is_clean() const; bool is_call_to_compiled() const; bool is_call_to_interpreted() const; // Clean static call (will force resolving on next use) void set_to_clean(); // Set state. The entry must be the same, as computed by compute_entry. // Computation and setting is split up, since the actions are separate during // a OptoRuntime::resolve_xxx. void set(const StaticCallInfo& info); // Compute entry point given a method static void compute_entry(methodHandle m, StaticCallInfo& info); // Stub support address find_stub(); static void set_stub_to_clean(static_stub_Relocation* static_stub); // Misc. void print() PRODUCT_RETURN; void verify() PRODUCT_RETURN; }; inline CompiledStaticCall* compiledStaticCall_before(address return_addr) { CompiledStaticCall* st = (CompiledStaticCall*)nativeCall_before(return_addr); st->verify(); return st; } inline CompiledStaticCall* compiledStaticCall_at(address native_call) { CompiledStaticCall* st = (CompiledStaticCall*)native_call; st->verify(); return st; } inline CompiledStaticCall* compiledStaticCall_at(Relocation* call_site) { return compiledStaticCall_at(call_site->addr()); } #endif // SHARE_VM_CODE_COMPILEDIC_HPP