Mercurial > hg > graal-jvmci-8
view src/cpu/x86/vm/assembler_x86_32.hpp @ 222:2a1a77d3458f
6718676: putback for 6604014 is incomplete
Reviewed-by: kvn, jrose
author | never |
---|---|
date | Tue, 24 Jun 2008 16:00:14 -0700 |
parents | 7793bd37a336 |
children | d1605aabd0a1 6aae2f9d0294 |
line wrap: on
line source
/* * Copyright 1997-2007 Sun Microsystems, Inc. All Rights Reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, * CA 95054 USA or visit www.sun.com if you need additional information or * have any questions. * */ class BiasedLockingCounters; // Contains all the definitions needed for x86 assembly code generation. // Calling convention class Argument VALUE_OBJ_CLASS_SPEC { public: enum { #ifdef _LP64 #ifdef _WIN64 n_int_register_parameters_c = 4, // rcx, rdx, r8, r9 (c_rarg0, c_rarg1, ...) n_float_register_parameters_c = 4, // xmm0 - xmm3 (c_farg0, c_farg1, ... ) #else n_int_register_parameters_c = 6, // rdi, rsi, rdx, rcx, r8, r9 (c_rarg0, c_rarg1, ...) n_float_register_parameters_c = 8, // xmm0 - xmm7 (c_farg0, c_farg1, ... ) #endif // _WIN64 n_int_register_parameters_j = 6, // j_rarg0, j_rarg1, ... n_float_register_parameters_j = 8 // j_farg0, j_farg1, ... #else n_register_parameters = 0 // 0 registers used to pass arguments #endif // _LP64 }; }; #ifdef _LP64 // Symbolically name the register arguments used by the c calling convention. // Windows is different from linux/solaris. So much for standards... #ifdef _WIN64 REGISTER_DECLARATION(Register, c_rarg0, rcx); REGISTER_DECLARATION(Register, c_rarg1, rdx); REGISTER_DECLARATION(Register, c_rarg2, r8); REGISTER_DECLARATION(Register, c_rarg3, r9); REGISTER_DECLARATION(FloatRegister, c_farg0, xmm0); REGISTER_DECLARATION(FloatRegister, c_farg1, xmm1); REGISTER_DECLARATION(FloatRegister, c_farg2, xmm2); REGISTER_DECLARATION(FloatRegister, c_farg3, xmm3); #else REGISTER_DECLARATION(Register, c_rarg0, rdi); REGISTER_DECLARATION(Register, c_rarg1, rsi); REGISTER_DECLARATION(Register, c_rarg2, rdx); REGISTER_DECLARATION(Register, c_rarg3, rcx); REGISTER_DECLARATION(Register, c_rarg4, r8); REGISTER_DECLARATION(Register, c_rarg5, r9); REGISTER_DECLARATION(FloatRegister, c_farg0, xmm0); REGISTER_DECLARATION(FloatRegister, c_farg1, xmm1); REGISTER_DECLARATION(FloatRegister, c_farg2, xmm2); REGISTER_DECLARATION(FloatRegister, c_farg3, xmm3); REGISTER_DECLARATION(FloatRegister, c_farg4, xmm4); REGISTER_DECLARATION(FloatRegister, c_farg5, xmm5); REGISTER_DECLARATION(FloatRegister, c_farg6, xmm6); REGISTER_DECLARATION(FloatRegister, c_farg7, xmm7); #endif // _WIN64 // Symbolically name the register arguments used by the Java calling convention. // We have control over the convention for java so we can do what we please. // What pleases us is to offset the java calling convention so that when // we call a suitable jni method the arguments are lined up and we don't // have to do little shuffling. A suitable jni method is non-static and a // small number of arguments (two fewer args on windows) // // |-------------------------------------------------------| // | c_rarg0 c_rarg1 c_rarg2 c_rarg3 c_rarg4 c_rarg5 | // |-------------------------------------------------------| // | rcx rdx r8 r9 rdi* rsi* | windows (* not a c_rarg) // | rdi rsi rdx rcx r8 r9 | solaris/linux // |-------------------------------------------------------| // | j_rarg5 j_rarg0 j_rarg1 j_rarg2 j_rarg3 j_rarg4 | // |-------------------------------------------------------| REGISTER_DECLARATION(Register, j_rarg0, c_rarg1); REGISTER_DECLARATION(Register, j_rarg1, c_rarg2); REGISTER_DECLARATION(Register, j_rarg2, c_rarg3); // Windows runs out of register args here #ifdef _WIN64 REGISTER_DECLARATION(Register, j_rarg3, rdi); REGISTER_DECLARATION(Register, j_rarg4, rsi); #else REGISTER_DECLARATION(Register, j_rarg3, c_rarg4); REGISTER_DECLARATION(Register, j_rarg4, c_rarg5); #endif /* _WIN64 */ REGISTER_DECLARATION(Register, j_rarg5, c_rarg0); REGISTER_DECLARATION(FloatRegister, j_farg0, xmm0); REGISTER_DECLARATION(FloatRegister, j_farg1, xmm1); REGISTER_DECLARATION(FloatRegister, j_farg2, xmm2); REGISTER_DECLARATION(FloatRegister, j_farg3, xmm3); REGISTER_DECLARATION(FloatRegister, j_farg4, xmm4); REGISTER_DECLARATION(FloatRegister, j_farg5, xmm5); REGISTER_DECLARATION(FloatRegister, j_farg6, xmm6); REGISTER_DECLARATION(FloatRegister, j_farg7, xmm7); REGISTER_DECLARATION(Register, rscratch1, r10); // volatile REGISTER_DECLARATION(Register, rscratch2, r11); // volatile REGISTER_DECLARATION(Register, r15_thread, r15); // callee-saved #endif // _LP64 // Address is an abstraction used to represent a memory location // using any of the amd64 addressing modes with one object. // // Note: A register location is represented via a Register, not // via an address for efficiency & simplicity reasons. class ArrayAddress; class Address VALUE_OBJ_CLASS_SPEC { public: enum ScaleFactor { no_scale = -1, times_1 = 0, times_2 = 1, times_4 = 2, times_8 = 3 }; private: Register _base; Register _index; ScaleFactor _scale; int _disp; RelocationHolder _rspec; // Easily misused constructor make them private #ifndef _LP64 Address(address loc, RelocationHolder spec); #endif // _LP64 public: // creation Address() : _base(noreg), _index(noreg), _scale(no_scale), _disp(0) { } // No default displacement otherwise Register can be implicitly // converted to 0(Register) which is quite a different animal. Address(Register base, int disp) : _base(base), _index(noreg), _scale(no_scale), _disp(disp) { } Address(Register base, Register index, ScaleFactor scale, int disp = 0) : _base (base), _index(index), _scale(scale), _disp (disp) { assert(!index->is_valid() == (scale == Address::no_scale), "inconsistent address"); } // The following two overloads are used in connection with the // ByteSize type (see sizes.hpp). They simplify the use of // ByteSize'd arguments in assembly code. Note that their equivalent // for the optimized build are the member functions with int disp // argument since ByteSize is mapped to an int type in that case. // // Note: DO NOT introduce similar overloaded functions for WordSize // arguments as in the optimized mode, both ByteSize and WordSize // are mapped to the same type and thus the compiler cannot make a // distinction anymore (=> compiler errors). #ifdef ASSERT Address(Register base, ByteSize disp) : _base(base), _index(noreg), _scale(no_scale), _disp(in_bytes(disp)) { } Address(Register base, Register index, ScaleFactor scale, ByteSize disp) : _base(base), _index(index), _scale(scale), _disp(in_bytes(disp)) { assert(!index->is_valid() == (scale == Address::no_scale), "inconsistent address"); } #endif // ASSERT // accessors bool uses(Register reg) const { return _base == reg || _index == reg; } // Convert the raw encoding form into the form expected by the constructor for // Address. An index of 4 (rsp) corresponds to having no index, so convert // that to noreg for the Address constructor. static Address make_raw(int base, int index, int scale, int disp); static Address make_array(ArrayAddress); private: bool base_needs_rex() const { return _base != noreg && _base->encoding() >= 8; } bool index_needs_rex() const { return _index != noreg &&_index->encoding() >= 8; } relocInfo::relocType reloc() const { return _rspec.type(); } friend class Assembler; friend class MacroAssembler; friend class LIR_Assembler; // base/index/scale/disp }; // // AddressLiteral has been split out from Address because operands of this type // need to be treated specially on 32bit vs. 64bit platforms. By splitting it out // the few instructions that need to deal with address literals are unique and the // MacroAssembler does not have to implement every instruction in the Assembler // in order to search for address literals that may need special handling depending // on the instruction and the platform. As small step on the way to merging i486/amd64 // directories. // class AddressLiteral VALUE_OBJ_CLASS_SPEC { friend class ArrayAddress; RelocationHolder _rspec; // Typically we use AddressLiterals we want to use their rval // However in some situations we want the lval (effect address) of the item. // We provide a special factory for making those lvals. bool _is_lval; // If the target is far we'll need to load the ea of this to // a register to reach it. Otherwise if near we can do rip // relative addressing. address _target; protected: // creation AddressLiteral() : _is_lval(false), _target(NULL) {} public: AddressLiteral(address target, relocInfo::relocType rtype); AddressLiteral(address target, RelocationHolder const& rspec) : _rspec(rspec), _is_lval(false), _target(target) {} AddressLiteral addr() { AddressLiteral ret = *this; ret._is_lval = true; return ret; } private: address target() { return _target; } bool is_lval() { return _is_lval; } relocInfo::relocType reloc() const { return _rspec.type(); } const RelocationHolder& rspec() const { return _rspec; } friend class Assembler; friend class MacroAssembler; friend class Address; friend class LIR_Assembler; }; // Convience classes class RuntimeAddress: public AddressLiteral { public: RuntimeAddress(address target) : AddressLiteral(target, relocInfo::runtime_call_type) {} }; class OopAddress: public AddressLiteral { public: OopAddress(address target) : AddressLiteral(target, relocInfo::oop_type){} }; class ExternalAddress: public AddressLiteral { public: ExternalAddress(address target) : AddressLiteral(target, relocInfo::external_word_type){} }; class InternalAddress: public AddressLiteral { public: InternalAddress(address target) : AddressLiteral(target, relocInfo::internal_word_type) {} }; // x86 can do array addressing as a single operation since disp can be an absolute // address amd64 can't. We create a class that expresses the concept but does extra // magic on amd64 to get the final result class ArrayAddress VALUE_OBJ_CLASS_SPEC { private: AddressLiteral _base; Address _index; public: ArrayAddress() {}; ArrayAddress(AddressLiteral base, Address index): _base(base), _index(index) {}; AddressLiteral base() { return _base; } Address index() { return _index; } }; #ifndef _LP64 const int FPUStateSizeInWords = 27; #else const int FPUStateSizeInWords = 512 / wordSize; #endif // _LP64 // The Intel x86/Amd64 Assembler: Pure assembler doing NO optimizations on the instruction // level (e.g. mov rax, 0 is not translated into xor rax, rax!); i.e., what you write // is what you get. The Assembler is generating code into a CodeBuffer. class Assembler : public AbstractAssembler { friend class AbstractAssembler; // for the non-virtual hack friend class LIR_Assembler; // as_Address() protected: #ifdef ASSERT void check_relocation(RelocationHolder const& rspec, int format); #endif inline void emit_long64(jlong x); void emit_data(jint data, relocInfo::relocType rtype, int format /* = 0 */); void emit_data(jint data, RelocationHolder const& rspec, int format /* = 0 */); void emit_data64(jlong data, relocInfo::relocType rtype, int format = 0); void emit_data64(jlong data, RelocationHolder const& rspec, int format = 0); // Helper functions for groups of instructions void emit_arith_b(int op1, int op2, Register dst, int imm8); void emit_arith(int op1, int op2, Register dst, int imm32); // only x86?? void emit_arith(int op1, int op2, Register dst, jobject obj); void emit_arith(int op1, int op2, Register dst, Register src); void emit_operand(Register reg, Register base, Register index, Address::ScaleFactor scale, int disp, RelocationHolder const& rspec); void emit_operand(Register reg, Address adr); // Immediate-to-memory forms void emit_arith_operand(int op1, Register rm, Address adr, int imm32); void emit_farith(int b1, int b2, int i); // macroassembler?? QQQ bool reachable(AddressLiteral adr) { return true; } // These are all easily abused and hence protected // Make these disappear in 64bit mode since they would never be correct #ifndef _LP64 void cmp_literal32(Register src1, int32_t imm32, RelocationHolder const& rspec); void cmp_literal32(Address src1, int32_t imm32, RelocationHolder const& rspec); void mov_literal32(Register dst, int32_t imm32, RelocationHolder const& rspec); void mov_literal32(Address dst, int32_t imm32, RelocationHolder const& rspec); void push_literal32(int32_t imm32, RelocationHolder const& rspec); #endif // _LP64 // These are unique in that we are ensured by the caller that the 32bit // relative in these instructions will always be able to reach the potentially // 64bit address described by entry. Since they can take a 64bit address they // don't have the 32 suffix like the other instructions in this class. void call_literal(address entry, RelocationHolder const& rspec); void jmp_literal(address entry, RelocationHolder const& rspec); public: enum Condition { // The x86 condition codes used for conditional jumps/moves. zero = 0x4, notZero = 0x5, equal = 0x4, notEqual = 0x5, less = 0xc, lessEqual = 0xe, greater = 0xf, greaterEqual = 0xd, below = 0x2, belowEqual = 0x6, above = 0x7, aboveEqual = 0x3, overflow = 0x0, noOverflow = 0x1, carrySet = 0x2, carryClear = 0x3, negative = 0x8, positive = 0x9, parity = 0xa, noParity = 0xb }; enum Prefix { // segment overrides CS_segment = 0x2e, SS_segment = 0x36, DS_segment = 0x3e, ES_segment = 0x26, FS_segment = 0x64, GS_segment = 0x65, REX = 0x40, REX_B = 0x41, REX_X = 0x42, REX_XB = 0x43, REX_R = 0x44, REX_RB = 0x45, REX_RX = 0x46, REX_RXB = 0x47, REX_W = 0x48, REX_WB = 0x49, REX_WX = 0x4A, REX_WXB = 0x4B, REX_WR = 0x4C, REX_WRB = 0x4D, REX_WRX = 0x4E, REX_WRXB = 0x4F }; enum WhichOperand { // input to locate_operand, and format code for relocations imm32_operand = 0, // embedded 32-bit immediate operand disp32_operand = 1, // embedded 32-bit displacement or address call32_operand = 2, // embedded 32-bit self-relative displacement _WhichOperand_limit = 3 }; public: // Creation Assembler(CodeBuffer* code) : AbstractAssembler(code) {} // Decoding static address locate_operand(address inst, WhichOperand which); static address locate_next_instruction(address inst); // Stack void pushad(); void popad(); void pushfd(); void popfd(); void pushl(int imm32); void pushoop(jobject obj); void pushl(Register src); void pushl(Address src); // void pushl(Label& L, relocInfo::relocType rtype); ? needed? // dummy to prevent NULL being converted to Register void pushl(void* dummy); void popl(Register dst); void popl(Address dst); // Instruction prefixes void prefix(Prefix p); // Moves void movb(Register dst, Address src); void movb(Address dst, int imm8); void movb(Address dst, Register src); void movw(Address dst, int imm16); void movw(Register dst, Address src); void movw(Address dst, Register src); // these are dummies used to catch attempting to convert NULL to Register void movl(Register dst, void* junk); void movl(Address dst, void* junk); void movl(Register dst, int imm32); void movl(Address dst, int imm32); void movl(Register dst, Register src); void movl(Register dst, Address src); void movl(Address dst, Register src); void movsxb(Register dst, Address src); void movsxb(Register dst, Register src); void movsxw(Register dst, Address src); void movsxw(Register dst, Register src); void movzxb(Register dst, Address src); void movzxb(Register dst, Register src); void movzxw(Register dst, Address src); void movzxw(Register dst, Register src); // Conditional moves (P6 only) void cmovl(Condition cc, Register dst, Register src); void cmovl(Condition cc, Register dst, Address src); // Prefetches (SSE, SSE2, 3DNOW only) void prefetcht0(Address src); void prefetcht1(Address src); void prefetcht2(Address src); void prefetchnta(Address src); void prefetchw(Address src); void prefetchr(Address src); // Arithmetics void adcl(Register dst, int imm32); void adcl(Register dst, Address src); void adcl(Register dst, Register src); void addl(Address dst, int imm32); void addl(Address dst, Register src); void addl(Register dst, int imm32); void addl(Register dst, Address src); void addl(Register dst, Register src); void andl(Register dst, int imm32); void andl(Register dst, Address src); void andl(Register dst, Register src); void cmpb(Address dst, int imm8); void cmpw(Address dst, int imm16); void cmpl(Address dst, int imm32); void cmpl(Register dst, int imm32); void cmpl(Register dst, Register src); void cmpl(Register dst, Address src); // this is a dummy used to catch attempting to convert NULL to Register void cmpl(Register dst, void* junk); protected: // Don't use next inc() and dec() methods directly. INC & DEC instructions // could cause a partial flag stall since they don't set CF flag. // Use MacroAssembler::decrement() & MacroAssembler::increment() methods // which call inc() & dec() or add() & sub() in accordance with // the product flag UseIncDec value. void decl(Register dst); void decl(Address dst); void incl(Register dst); void incl(Address dst); public: void idivl(Register src); void cdql(); void imull(Register dst, Register src); void imull(Register dst, Register src, int value); void leal(Register dst, Address src); void mull(Address src); void mull(Register src); void negl(Register dst); void notl(Register dst); void orl(Address dst, int imm32); void orl(Register dst, int imm32); void orl(Register dst, Address src); void orl(Register dst, Register src); void rcll(Register dst, int imm8); void sarl(Register dst, int imm8); void sarl(Register dst); void sbbl(Address dst, int imm32); void sbbl(Register dst, int imm32); void sbbl(Register dst, Address src); void sbbl(Register dst, Register src); void shldl(Register dst, Register src); void shll(Register dst, int imm8); void shll(Register dst); void shrdl(Register dst, Register src); void shrl(Register dst, int imm8); void shrl(Register dst); void subl(Address dst, int imm32); void subl(Address dst, Register src); void subl(Register dst, int imm32); void subl(Register dst, Address src); void subl(Register dst, Register src); void testb(Register dst, int imm8); void testl(Register dst, int imm32); void testl(Register dst, Address src); void testl(Register dst, Register src); void xaddl(Address dst, Register src); void xorl(Register dst, int imm32); void xorl(Register dst, Address src); void xorl(Register dst, Register src); // Miscellaneous void bswap(Register reg); void lock(); void xchg (Register reg, Address adr); void xchgl(Register dst, Register src); void cmpxchg (Register reg, Address adr); void cmpxchg8 (Address adr); void nop(int i = 1); void addr_nop_4(); void addr_nop_5(); void addr_nop_7(); void addr_nop_8(); void hlt(); void ret(int imm16); void set_byte_if_not_zero(Register dst); // sets reg to 1 if not zero, otherwise 0 void smovl(); void rep_movl(); void rep_set(); void repne_scan(); void setb(Condition cc, Register dst); void membar(); // Serializing memory-fence void cpuid(); void cld(); void std(); void emit_raw (unsigned char); // Calls void call(Label& L, relocInfo::relocType rtype); void call(Register reg); // push pc; pc <- reg void call(Address adr); // push pc; pc <- adr // Jumps void jmp(Address entry); // pc <- entry void jmp(Register entry); // pc <- entry // Label operations & relative jumps (PPUM Appendix D) void jmp(Label& L, relocInfo::relocType rtype = relocInfo::none); // unconditional jump to L // Force an 8-bit jump offset // void jmpb(address entry); // Unconditional 8-bit offset jump to L. // WARNING: be very careful using this for forward jumps. If the label is // not bound within an 8-bit offset of this instruction, a run-time error // will occur. void jmpb(Label& L); // jcc is the generic conditional branch generator to run- // time routines, jcc is used for branches to labels. jcc // takes a branch opcode (cc) and a label (L) and generates // either a backward branch or a forward branch and links it // to the label fixup chain. Usage: // // Label L; // unbound label // jcc(cc, L); // forward branch to unbound label // bind(L); // bind label to the current pc // jcc(cc, L); // backward branch to bound label // bind(L); // illegal: a label may be bound only once // // Note: The same Label can be used for forward and backward branches // but it may be bound only once. void jcc(Condition cc, Label& L, relocInfo::relocType rtype = relocInfo::none); // Conditional jump to a 8-bit offset to L. // WARNING: be very careful using this for forward jumps. If the label is // not bound within an 8-bit offset of this instruction, a run-time error // will occur. void jccb(Condition cc, Label& L); // Floating-point operations void fld1(); void fldz(); void fld_s(Address adr); void fld_s(int index); void fld_d(Address adr); void fld_x(Address adr); // extended-precision (80-bit) format void fst_s(Address adr); void fst_d(Address adr); void fstp_s(Address adr); void fstp_d(Address adr); void fstp_d(int index); void fstp_x(Address adr); // extended-precision (80-bit) format void fild_s(Address adr); void fild_d(Address adr); void fist_s (Address adr); void fistp_s(Address adr); void fistp_d(Address adr); void fabs(); void fchs(); void flog(); void flog10(); void fldln2(); void fyl2x(); void fldlg2(); void fcos(); void fsin(); void ftan(); void fsqrt(); // "Alternate" versions of instructions place result down in FPU // stack instead of on TOS void fadd_s(Address src); void fadd_d(Address src); void fadd(int i); void fadda(int i); // "alternate" fadd void fsub_s(Address src); void fsub_d(Address src); void fsubr_s(Address src); void fsubr_d(Address src); void fmul_s(Address src); void fmul_d(Address src); void fmul(int i); void fmula(int i); // "alternate" fmul void fdiv_s(Address src); void fdiv_d(Address src); void fdivr_s(Address src); void fdivr_d(Address src); void fsub(int i); void fsuba(int i); // "alternate" fsub void fsubr(int i); void fsubra(int i); // "alternate" reversed fsub void fdiv(int i); void fdiva(int i); // "alternate" fdiv void fdivr(int i); void fdivra(int i); // "alternate" reversed fdiv void faddp(int i = 1); void fsubp(int i = 1); void fsubrp(int i = 1); void fmulp(int i = 1); void fdivp(int i = 1); void fdivrp(int i = 1); void fprem(); void fprem1(); void fxch(int i = 1); void fincstp(); void fdecstp(); void ffree(int i = 0); void fcomp_s(Address src); void fcomp_d(Address src); void fcom(int i); void fcomp(int i = 1); void fcompp(); void fucomi(int i = 1); void fucomip(int i = 1); void ftst(); void fnstsw_ax(); void fwait(); void finit(); void fldcw(Address src); void fnstcw(Address src); void fnsave(Address dst); void frstor(Address src); void fldenv(Address src); void sahf(); protected: void emit_sse_operand(XMMRegister reg, Address adr); void emit_sse_operand(Register reg, Address adr); void emit_sse_operand(XMMRegister dst, XMMRegister src); void emit_sse_operand(XMMRegister dst, Register src); void emit_sse_operand(Register dst, XMMRegister src); void emit_operand(MMXRegister reg, Address adr); public: // mmx operations void movq( MMXRegister dst, Address src ); void movq( Address dst, MMXRegister src ); void emms(); // xmm operations void addss(XMMRegister dst, Address src); // Add Scalar Single-Precision Floating-Point Values void addss(XMMRegister dst, XMMRegister src); void addsd(XMMRegister dst, Address src); // Add Scalar Double-Precision Floating-Point Values void addsd(XMMRegister dst, XMMRegister src); void subss(XMMRegister dst, Address src); // Subtract Scalar Single-Precision Floating-Point Values void subss(XMMRegister dst, XMMRegister src); void subsd(XMMRegister dst, Address src); // Subtract Scalar Double-Precision Floating-Point Values void subsd(XMMRegister dst, XMMRegister src); void mulss(XMMRegister dst, Address src); // Multiply Scalar Single-Precision Floating-Point Values void mulss(XMMRegister dst, XMMRegister src); void mulsd(XMMRegister dst, Address src); // Multiply Scalar Double-Precision Floating-Point Values void mulsd(XMMRegister dst, XMMRegister src); void divss(XMMRegister dst, Address src); // Divide Scalar Single-Precision Floating-Point Values void divss(XMMRegister dst, XMMRegister src); void divsd(XMMRegister dst, Address src); // Divide Scalar Double-Precision Floating-Point Values void divsd(XMMRegister dst, XMMRegister src); void sqrtss(XMMRegister dst, Address src); // Compute Square Root of Scalar Single-Precision Floating-Point Value void sqrtss(XMMRegister dst, XMMRegister src); void sqrtsd(XMMRegister dst, Address src); // Compute Square Root of Scalar Double-Precision Floating-Point Value void sqrtsd(XMMRegister dst, XMMRegister src); void pxor(XMMRegister dst, Address src); // Xor Packed Byte Integer Values void pxor(XMMRegister dst, XMMRegister src); // Xor Packed Byte Integer Values void comiss(XMMRegister dst, Address src); // Ordered Compare Scalar Single-Precision Floating-Point Values and set EFLAGS void comiss(XMMRegister dst, XMMRegister src); void comisd(XMMRegister dst, Address src); // Ordered Compare Scalar Double-Precision Floating-Point Values and set EFLAGS void comisd(XMMRegister dst, XMMRegister src); void ucomiss(XMMRegister dst, Address src); // Unordered Compare Scalar Single-Precision Floating-Point Values and set EFLAGS void ucomiss(XMMRegister dst, XMMRegister src); void ucomisd(XMMRegister dst, Address src); // Unordered Compare Scalar Double-Precision Floating-Point Values and set EFLAGS void ucomisd(XMMRegister dst, XMMRegister src); void cvtss2sd(XMMRegister dst, Address src); // Convert Scalar Single-Precision Floating-Point Value to Scalar Double-Precision Floating-Point Value void cvtss2sd(XMMRegister dst, XMMRegister src); void cvtsd2ss(XMMRegister dst, Address src); // Convert Scalar Double-Precision Floating-Point Value to Scalar Single-Precision Floating-Point Value void cvtsd2ss(XMMRegister dst, XMMRegister src); void cvtdq2pd(XMMRegister dst, XMMRegister src); void cvtdq2ps(XMMRegister dst, XMMRegister src); void cvtsi2ss(XMMRegister dst, Address src); // Convert Doubleword Integer to Scalar Single-Precision Floating-Point Value void cvtsi2ss(XMMRegister dst, Register src); void cvtsi2sd(XMMRegister dst, Address src); // Convert Doubleword Integer to Scalar Double-Precision Floating-Point Value void cvtsi2sd(XMMRegister dst, Register src); void cvtss2si(Register dst, Address src); // Convert Scalar Single-Precision Floating-Point Value to Doubleword Integer void cvtss2si(Register dst, XMMRegister src); void cvtsd2si(Register dst, Address src); // Convert Scalar Double-Precision Floating-Point Value to Doubleword Integer void cvtsd2si(Register dst, XMMRegister src); void cvttss2si(Register dst, Address src); // Convert with Truncation Scalar Single-Precision Floating-Point Value to Doubleword Integer void cvttss2si(Register dst, XMMRegister src); void cvttsd2si(Register dst, Address src); // Convert with Truncation Scalar Double-Precision Floating-Point Value to Doubleword Integer void cvttsd2si(Register dst, XMMRegister src); protected: // Avoid using the next instructions directly. // New cpus require use of movsd and movss to avoid partial register stall // when loading from memory. But for old Opteron use movlpd instead of movsd. // The selection is done in MacroAssembler::movdbl() and movflt(). void movss(XMMRegister dst, Address src); // Move Scalar Single-Precision Floating-Point Values void movss(XMMRegister dst, XMMRegister src); void movss(Address dst, XMMRegister src); void movsd(XMMRegister dst, Address src); // Move Scalar Double-Precision Floating-Point Values void movsd(XMMRegister dst, XMMRegister src); void movsd(Address dst, XMMRegister src); void movlpd(XMMRegister dst, Address src); // New cpus require use of movaps and movapd to avoid partial register stall // when moving between registers. void movaps(XMMRegister dst, XMMRegister src); void movapd(XMMRegister dst, XMMRegister src); public: void andps(XMMRegister dst, Address src); // Bitwise Logical AND of Packed Single-Precision Floating-Point Values void andps(XMMRegister dst, XMMRegister src); void andpd(XMMRegister dst, Address src); // Bitwise Logical AND of Packed Double-Precision Floating-Point Values void andpd(XMMRegister dst, XMMRegister src); void andnps(XMMRegister dst, Address src); // Bitwise Logical AND NOT of Packed Single-Precision Floating-Point Values void andnps(XMMRegister dst, XMMRegister src); void andnpd(XMMRegister dst, Address src); // Bitwise Logical AND NOT of Packed Double-Precision Floating-Point Values void andnpd(XMMRegister dst, XMMRegister src); void orps(XMMRegister dst, Address src); // Bitwise Logical OR of Packed Single-Precision Floating-Point Values void orps(XMMRegister dst, XMMRegister src); void orpd(XMMRegister dst, Address src); // Bitwise Logical OR of Packed Double-Precision Floating-Point Values void orpd(XMMRegister dst, XMMRegister src); void xorps(XMMRegister dst, Address src); // Bitwise Logical XOR of Packed Single-Precision Floating-Point Values void xorps(XMMRegister dst, XMMRegister src); void xorpd(XMMRegister dst, Address src); // Bitwise Logical XOR of Packed Double-Precision Floating-Point Values void xorpd(XMMRegister dst, XMMRegister src); void movq(XMMRegister dst, Address src); // Move Quadword void movq(XMMRegister dst, XMMRegister src); void movq(Address dst, XMMRegister src); void movd(XMMRegister dst, Address src); // Move Doubleword void movd(XMMRegister dst, Register src); void movd(Register dst, XMMRegister src); void movd(Address dst, XMMRegister src); void movdqa(XMMRegister dst, Address src); // Move Aligned Double Quadword void movdqa(XMMRegister dst, XMMRegister src); void movdqa(Address dst, XMMRegister src); void pshufd(XMMRegister dst, XMMRegister src, int mode); // Shuffle Packed Doublewords void pshufd(XMMRegister dst, Address src, int mode); void pshuflw(XMMRegister dst, XMMRegister src, int mode); // Shuffle Packed Low Words void pshuflw(XMMRegister dst, Address src, int mode); void psrlq(XMMRegister dst, int shift); // Shift Right Logical Quadword Immediate void punpcklbw(XMMRegister dst, XMMRegister src); // Interleave Low Bytes void punpcklbw(XMMRegister dst, Address src); void ldmxcsr( Address src ); void stmxcsr( Address dst ); }; // MacroAssembler extends Assembler by frequently used macros. // // Instructions for which a 'better' code sequence exists depending // on arguments should also go in here. class MacroAssembler: public Assembler { friend class LIR_Assembler; protected: Address as_Address(AddressLiteral adr); Address as_Address(ArrayAddress adr); // Support for VM calls // // This is the base routine called by the different versions of call_VM_leaf. The interpreter // may customize this version by overriding it for its purposes (e.g., to save/restore // additional registers when doing a VM call). #ifdef CC_INTERP // c++ interpreter never wants to use interp_masm version of call_VM #define VIRTUAL #else #define VIRTUAL virtual #endif VIRTUAL void call_VM_leaf_base( address entry_point, // the entry point int number_of_arguments // the number of arguments to pop after the call ); // This is the base routine called by the different versions of call_VM. The interpreter // may customize this version by overriding it for its purposes (e.g., to save/restore // additional registers when doing a VM call). // // If no java_thread register is specified (noreg) than rdi will be used instead. call_VM_base // returns the register which contains the thread upon return. If a thread register has been // specified, the return value will correspond to that register. If no last_java_sp is specified // (noreg) than rsp will be used instead. VIRTUAL void call_VM_base( // returns the register containing the thread upon return Register oop_result, // where an oop-result ends up if any; use noreg otherwise Register java_thread, // the thread if computed before ; use noreg otherwise Register last_java_sp, // to set up last_Java_frame in stubs; use noreg otherwise address entry_point, // the entry point int number_of_arguments, // the number of arguments (w/o thread) to pop after the call bool check_exceptions // whether to check for pending exceptions after return ); // These routines should emit JVMTI PopFrame and ForceEarlyReturn handling code. // The implementation is only non-empty for the InterpreterMacroAssembler, // as only the interpreter handles PopFrame and ForceEarlyReturn requests. virtual void check_and_handle_popframe(Register java_thread); virtual void check_and_handle_earlyret(Register java_thread); void call_VM_helper(Register oop_result, address entry_point, int number_of_arguments, bool check_exceptions = true); // helpers for FPU flag access // tmp is a temporary register, if none is available use noreg void save_rax (Register tmp); void restore_rax(Register tmp); public: MacroAssembler(CodeBuffer* code) : Assembler(code) {} // Support for NULL-checks // // Generates code that causes a NULL OS exception if the content of reg is NULL. // If the accessed location is M[reg + offset] and the offset is known, provide the // offset. No explicit code generation is needed if the offset is within a certain // range (0 <= offset <= page_size). void null_check(Register reg, int offset = -1); static bool needs_explicit_null_check(intptr_t offset); // Required platform-specific helpers for Label::patch_instructions. // They _shadow_ the declarations in AbstractAssembler, which are undefined. void pd_patch_instruction(address branch, address target); #ifndef PRODUCT static void pd_print_patched_instruction(address branch); #endif // The following 4 methods return the offset of the appropriate move instruction // Support for fast byte/word loading with zero extension (depending on particular CPU) int load_unsigned_byte(Register dst, Address src); int load_unsigned_word(Register dst, Address src); // Support for fast byte/word loading with sign extension (depending on particular CPU) int load_signed_byte(Register dst, Address src); int load_signed_word(Register dst, Address src); // Support for sign-extension (hi:lo = extend_sign(lo)) void extend_sign(Register hi, Register lo); // Support for inc/dec with optimal instruction selection depending on value void increment(Register reg, int value = 1); void decrement(Register reg, int value = 1); void increment(Address dst, int value = 1); void decrement(Address dst, int value = 1); // Support optimal SSE move instructions. void movflt(XMMRegister dst, XMMRegister src) { if (UseXmmRegToRegMoveAll) { movaps(dst, src); return; } else { movss (dst, src); return; } } void movflt(XMMRegister dst, Address src) { movss(dst, src); } void movflt(XMMRegister dst, AddressLiteral src); void movflt(Address dst, XMMRegister src) { movss(dst, src); } void movdbl(XMMRegister dst, XMMRegister src) { if (UseXmmRegToRegMoveAll) { movapd(dst, src); return; } else { movsd (dst, src); return; } } void movdbl(XMMRegister dst, AddressLiteral src); void movdbl(XMMRegister dst, Address src) { if (UseXmmLoadAndClearUpper) { movsd (dst, src); return; } else { movlpd(dst, src); return; } } void movdbl(Address dst, XMMRegister src) { movsd(dst, src); } void increment(AddressLiteral dst); void increment(ArrayAddress dst); // Alignment void align(int modulus); // Misc void fat_nop(); // 5 byte nop // Stack frame creation/removal void enter(); void leave(); // Support for getting the JavaThread pointer (i.e.; a reference to thread-local information) // The pointer will be loaded into the thread register. void get_thread(Register thread); // Support for VM calls // // It is imperative that all calls into the VM are handled via the call_VM macros. // They make sure that the stack linkage is setup correctly. call_VM's correspond // to ENTRY/ENTRY_X entry points while call_VM_leaf's correspond to LEAF entry points. void call_VM(Register oop_result, address entry_point, bool check_exceptions = true); void call_VM(Register oop_result, address entry_point, Register arg_1, bool check_exceptions = true); void call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, bool check_exceptions = true); void call_VM(Register oop_result, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions = true); void call_VM(Register oop_result, Register last_java_sp, address entry_point, int number_of_arguments = 0, bool check_exceptions = true); void call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, bool check_exceptions = true); void call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, Register arg_2, bool check_exceptions = true); void call_VM(Register oop_result, Register last_java_sp, address entry_point, Register arg_1, Register arg_2, Register arg_3, bool check_exceptions = true); void call_VM_leaf(address entry_point, int number_of_arguments = 0); void call_VM_leaf(address entry_point, Register arg_1); void call_VM_leaf(address entry_point, Register arg_1, Register arg_2); void call_VM_leaf(address entry_point, Register arg_1, Register arg_2, Register arg_3); // last Java Frame (fills frame anchor) void set_last_Java_frame(Register thread, Register last_java_sp, Register last_java_fp, address last_java_pc); void reset_last_Java_frame(Register thread, bool clear_fp, bool clear_pc); // Stores void store_check(Register obj); // store check for obj - register is destroyed afterwards void store_check(Register obj, Address dst); // same as above, dst is exact store location (reg. is destroyed) // split store_check(Register obj) to enhance instruction interleaving void store_check_part_1(Register obj); void store_check_part_2(Register obj); // C 'boolean' to Java boolean: x == 0 ? 0 : 1 void c2bool(Register x); // C++ bool manipulation void movbool(Register dst, Address src); void movbool(Address dst, bool boolconst); void movbool(Address dst, Register src); void testbool(Register dst); // Int division/reminder for Java // (as idivl, but checks for special case as described in JVM spec.) // returns idivl instruction offset for implicit exception handling int corrected_idivl(Register reg); void int3(); // Long negation for Java void lneg(Register hi, Register lo); // Long multiplication for Java // (destroys contents of rax, rbx, rcx and rdx) void lmul(int x_rsp_offset, int y_rsp_offset); // rdx:rax = x * y // Long shifts for Java // (semantics as described in JVM spec.) void lshl(Register hi, Register lo); // hi:lo << (rcx & 0x3f) void lshr(Register hi, Register lo, bool sign_extension = false); // hi:lo >> (rcx & 0x3f) // Long compare for Java // (semantics as described in JVM spec.) void lcmp2int(Register x_hi, Register x_lo, Register y_hi, Register y_lo); // x_hi = lcmp(x, y) // Compares the top-most stack entries on the FPU stack and sets the eflags as follows: // // CF (corresponds to C0) if x < y // PF (corresponds to C2) if unordered // ZF (corresponds to C3) if x = y // // The arguments are in reversed order on the stack (i.e., top of stack is first argument). // tmp is a temporary register, if none is available use noreg (only matters for non-P6 code) void fcmp(Register tmp); // Variant of the above which allows y to be further down the stack // and which only pops x and y if specified. If pop_right is // specified then pop_left must also be specified. void fcmp(Register tmp, int index, bool pop_left, bool pop_right); // Floating-point comparison for Java // Compares the top-most stack entries on the FPU stack and stores the result in dst. // The arguments are in reversed order on the stack (i.e., top of stack is first argument). // (semantics as described in JVM spec.) void fcmp2int(Register dst, bool unordered_is_less); // Variant of the above which allows y to be further down the stack // and which only pops x and y if specified. If pop_right is // specified then pop_left must also be specified. void fcmp2int(Register dst, bool unordered_is_less, int index, bool pop_left, bool pop_right); // Floating-point remainder for Java (ST0 = ST0 fremr ST1, ST1 is empty afterwards) // tmp is a temporary register, if none is available use noreg void fremr(Register tmp); // same as fcmp2int, but using SSE2 void cmpss2int(XMMRegister opr1, XMMRegister opr2, Register dst, bool unordered_is_less); void cmpsd2int(XMMRegister opr1, XMMRegister opr2, Register dst, bool unordered_is_less); // Inlined sin/cos generator for Java; must not use CPU instruction // directly on Intel as it does not have high enough precision // outside of the range [-pi/4, pi/4]. Extra argument indicate the // number of FPU stack slots in use; all but the topmost will // require saving if a slow case is necessary. Assumes argument is // on FP TOS; result is on FP TOS. No cpu registers are changed by // this code. void trigfunc(char trig, int num_fpu_regs_in_use = 1); // branch to L if FPU flag C2 is set/not set // tmp is a temporary register, if none is available use noreg void jC2 (Register tmp, Label& L); void jnC2(Register tmp, Label& L); // Pop ST (ffree & fincstp combined) void fpop(); // pushes double TOS element of FPU stack on CPU stack; pops from FPU stack void push_fTOS(); // pops double TOS element from CPU stack and pushes on FPU stack void pop_fTOS(); void empty_FPU_stack(); void push_IU_state(); void pop_IU_state(); void push_FPU_state(); void pop_FPU_state(); void push_CPU_state(); void pop_CPU_state(); // Sign extension void sign_extend_short(Register reg); void sign_extend_byte(Register reg); // Division by power of 2, rounding towards 0 void division_with_shift(Register reg, int shift_value); // Round up to a power of two void round_to(Register reg, int modulus); // Callee saved registers handling void push_callee_saved_registers(); void pop_callee_saved_registers(); // allocation void eden_allocate( Register obj, // result: pointer to object after successful allocation Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise int con_size_in_bytes, // object size in bytes if known at compile time Register t1, // temp register Label& slow_case // continuation point if fast allocation fails ); void tlab_allocate( Register obj, // result: pointer to object after successful allocation Register var_size_in_bytes, // object size in bytes if unknown at compile time; invalid otherwise int con_size_in_bytes, // object size in bytes if known at compile time Register t1, // temp register Register t2, // temp register Label& slow_case // continuation point if fast allocation fails ); void tlab_refill(Label& retry_tlab, Label& try_eden, Label& slow_case); //---- void set_word_if_not_zero(Register reg); // sets reg to 1 if not zero, otherwise 0 // Debugging void verify_oop(Register reg, const char* s = "broken oop"); // only if +VerifyOops void verify_oop_addr(Address addr, const char * s = "broken oop addr"); void verify_FPU(int stack_depth, const char* s = "illegal FPU state"); // only if +VerifyFPU void stop(const char* msg); // prints msg, dumps registers and stops execution void warn(const char* msg); // prints msg and continues static void debug(int rdi, int rsi, int rbp, int rsp, int rbx, int rdx, int rcx, int rax, int eip, char* msg); void os_breakpoint(); void untested() { stop("untested"); } void unimplemented(const char* what = "") { char* b = new char[1024]; jio_snprintf(b, sizeof(b), "unimplemented: %s", what); stop(b); } void should_not_reach_here() { stop("should not reach here"); } void print_CPU_state(); // Stack overflow checking void bang_stack_with_offset(int offset) { // stack grows down, caller passes positive offset assert(offset > 0, "must bang with negative offset"); movl(Address(rsp, (-offset)), rax); } // Writes to stack successive pages until offset reached to check for // stack overflow + shadow pages. Also, clobbers tmp void bang_stack_size(Register size, Register tmp); // Support for serializing memory accesses between threads void serialize_memory(Register thread, Register tmp); void verify_tlab(); // Biased locking support // lock_reg and obj_reg must be loaded up with the appropriate values. // swap_reg must be rax, and is killed. // tmp_reg is optional. If it is supplied (i.e., != noreg) it will // be killed; if not supplied, push/pop will be used internally to // allocate a temporary (inefficient, avoid if possible). // Optional slow case is for implementations (interpreter and C1) which branch to // slow case directly. Leaves condition codes set for C2's Fast_Lock node. // Returns offset of first potentially-faulting instruction for null // check info (currently consumed only by C1). If // swap_reg_contains_mark is true then returns -1 as it is assumed // the calling code has already passed any potential faults. int biased_locking_enter(Register lock_reg, Register obj_reg, Register swap_reg, Register tmp_reg, bool swap_reg_contains_mark, Label& done, Label* slow_case = NULL, BiasedLockingCounters* counters = NULL); void biased_locking_exit (Register obj_reg, Register temp_reg, Label& done); Condition negate_condition(Condition cond); // Instructions that use AddressLiteral operands. These instruction can handle 32bit/64bit // operands. In general the names are modified to avoid hiding the instruction in Assembler // so that we don't need to implement all the varieties in the Assembler with trivial wrappers // here in MacroAssembler. The major exception to this rule is call // Arithmetics void cmp8(AddressLiteral src1, int8_t imm); // QQQ renamed to drag out the casting of address to int32_t/intptr_t void cmp32(Register src1, int32_t imm); void cmp32(AddressLiteral src1, int32_t imm); // compare reg - mem, or reg - &mem void cmp32(Register src1, AddressLiteral src2); void cmp32(Register src1, Address src2); // NOTE src2 must be the lval. This is NOT an mem-mem compare void cmpptr(Address src1, AddressLiteral src2); void cmpptr(Register src1, AddressLiteral src2); void cmpoop(Address dst, jobject obj); void cmpoop(Register dst, jobject obj); void cmpxchgptr(Register reg, AddressLiteral adr); // Helper functions for statistics gathering. // Conditionally (atomically, on MPs) increments passed counter address, preserving condition codes. void cond_inc32(Condition cond, AddressLiteral counter_addr); // Unconditional atomic increment. void atomic_incl(AddressLiteral counter_addr); void lea(Register dst, AddressLiteral adr); void lea(Address dst, AddressLiteral adr); void test32(Register dst, AddressLiteral src); // Calls void call(Label& L, relocInfo::relocType rtype); void call(Register entry); // NOTE: this call tranfers to the effective address of entry NOT // the address contained by entry. This is because this is more natural // for jumps/calls. void call(AddressLiteral entry); // Jumps // NOTE: these jumps tranfer to the effective address of dst NOT // the address contained by dst. This is because this is more natural // for jumps/calls. void jump(AddressLiteral dst); void jump_cc(Condition cc, AddressLiteral dst); // 32bit can do a case table jump in one instruction but we no longer allow the base // to be installed in the Address class. This jump will tranfers to the address // contained in the location described by entry (not the address of entry) void jump(ArrayAddress entry); // Floating void andpd(XMMRegister dst, Address src) { Assembler::andpd(dst, src); } void andpd(XMMRegister dst, AddressLiteral src); void comiss(XMMRegister dst, Address src) { Assembler::comiss(dst, src); } void comiss(XMMRegister dst, AddressLiteral src); void comisd(XMMRegister dst, Address src) { Assembler::comisd(dst, src); } void comisd(XMMRegister dst, AddressLiteral src); void fldcw(Address src) { Assembler::fldcw(src); } void fldcw(AddressLiteral src); void fld_s(int index) { Assembler::fld_s(index); } void fld_s(Address src) { Assembler::fld_s(src); } void fld_s(AddressLiteral src); void fld_d(Address src) { Assembler::fld_d(src); } void fld_d(AddressLiteral src); void fld_x(Address src) { Assembler::fld_x(src); } void fld_x(AddressLiteral src); void ldmxcsr(Address src) { Assembler::ldmxcsr(src); } void ldmxcsr(AddressLiteral src); void movss(Address dst, XMMRegister src) { Assembler::movss(dst, src); } void movss(XMMRegister dst, XMMRegister src) { Assembler::movss(dst, src); } void movss(XMMRegister dst, Address src) { Assembler::movss(dst, src); } void movss(XMMRegister dst, AddressLiteral src); void movsd(XMMRegister dst, XMMRegister src) { Assembler::movsd(dst, src); } void movsd(Address dst, XMMRegister src) { Assembler::movsd(dst, src); } void movsd(XMMRegister dst, Address src) { Assembler::movsd(dst, src); } void movsd(XMMRegister dst, AddressLiteral src); void ucomiss(XMMRegister dst, XMMRegister src) { Assembler::ucomiss(dst, src); } void ucomiss(XMMRegister dst, Address src) { Assembler::ucomiss(dst, src); } void ucomiss(XMMRegister dst, AddressLiteral src); void ucomisd(XMMRegister dst, XMMRegister src) { Assembler::ucomisd(dst, src); } void ucomisd(XMMRegister dst, Address src) { Assembler::ucomisd(dst, src); } void ucomisd(XMMRegister dst, AddressLiteral src); // Bitwise Logical XOR of Packed Double-Precision Floating-Point Values void xorpd(XMMRegister dst, XMMRegister src) { Assembler::xorpd(dst, src); } void xorpd(XMMRegister dst, Address src) { Assembler::xorpd(dst, src); } void xorpd(XMMRegister dst, AddressLiteral src); // Bitwise Logical XOR of Packed Single-Precision Floating-Point Values void xorps(XMMRegister dst, XMMRegister src) { Assembler::xorps(dst, src); } void xorps(XMMRegister dst, Address src) { Assembler::xorps(dst, src); } void xorps(XMMRegister dst, AddressLiteral src); // Data void movoop(Register dst, jobject obj); void movoop(Address dst, jobject obj); void movptr(ArrayAddress dst, Register src); // can this do an lea? void movptr(Register dst, ArrayAddress src); void movptr(Register dst, AddressLiteral src); // to avoid hiding movl void mov32(AddressLiteral dst, Register src); void mov32(Register dst, AddressLiteral src); // to avoid hiding movb void movbyte(ArrayAddress dst, int src); // Can push value or effective address void pushptr(AddressLiteral src); #undef VIRTUAL }; /** * class SkipIfEqual: * * Instantiating this class will result in assembly code being output that will * jump around any code emitted between the creation of the instance and it's * automatic destruction at the end of a scope block, depending on the value of * the flag passed to the constructor, which will be checked at run-time. */ class SkipIfEqual { private: MacroAssembler* _masm; Label _label; public: SkipIfEqual(MacroAssembler*, const bool* flag_addr, bool value); ~SkipIfEqual(); }; #ifdef ASSERT inline bool AbstractAssembler::pd_check_instruction_mark() { return true; } #endif