Mercurial > hg > graal-jvmci-8
view src/cpu/x86/vm/nativeInst_x86.cpp @ 222:2a1a77d3458f
6718676: putback for 6604014 is incomplete
Reviewed-by: kvn, jrose
author | never |
---|---|
date | Tue, 24 Jun 2008 16:00:14 -0700 |
parents | 018d5b58dd4f |
children | d1605aabd0a1 |
line wrap: on
line source
/* * Copyright 1997-2007 Sun Microsystems, Inc. All Rights Reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, * CA 95054 USA or visit www.sun.com if you need additional information or * have any questions. * */ # include "incls/_precompiled.incl" # include "incls/_nativeInst_x86.cpp.incl" void NativeInstruction::wrote(int offset) { ICache::invalidate_word(addr_at(offset)); } void NativeCall::verify() { // Make sure code pattern is actually a call imm32 instruction. int inst = ubyte_at(0); if (inst != instruction_code) { tty->print_cr("Addr: " INTPTR_FORMAT " Code: 0x%x", instruction_address(), inst); fatal("not a call disp32"); } } address NativeCall::destination() const { // Getting the destination of a call isn't safe because that call can // be getting patched while you're calling this. There's only special // places where this can be called but not automatically verifiable by // checking which locks are held. The solution is true atomic patching // on x86, nyi. return return_address() + displacement(); } void NativeCall::print() { tty->print_cr(PTR_FORMAT ": call " PTR_FORMAT, instruction_address(), destination()); } // Inserts a native call instruction at a given pc void NativeCall::insert(address code_pos, address entry) { intptr_t disp = (intptr_t)entry - ((intptr_t)code_pos + 1 + 4); #ifdef AMD64 guarantee(disp == (intptr_t)(jint)disp, "must be 32-bit offset"); #endif // AMD64 *code_pos = instruction_code; *((int32_t *)(code_pos+1)) = (int32_t) disp; ICache::invalidate_range(code_pos, instruction_size); } // MT-safe patching of a call instruction. // First patches first word of instruction to two jmp's that jmps to them // selfs (spinlock). Then patches the last byte, and then atomicly replaces // the jmp's with the first 4 byte of the new instruction. void NativeCall::replace_mt_safe(address instr_addr, address code_buffer) { assert(Patching_lock->is_locked() || SafepointSynchronize::is_at_safepoint(), "concurrent code patching"); assert (instr_addr != NULL, "illegal address for code patching"); NativeCall* n_call = nativeCall_at (instr_addr); // checking that it is a call if (os::is_MP()) { guarantee((intptr_t)instr_addr % BytesPerWord == 0, "must be aligned"); } // First patch dummy jmp in place unsigned char patch[4]; assert(sizeof(patch)==sizeof(jint), "sanity check"); patch[0] = 0xEB; // jmp rel8 patch[1] = 0xFE; // jmp to self patch[2] = 0xEB; patch[3] = 0xFE; // First patch dummy jmp in place *(jint*)instr_addr = *(jint *)patch; // Invalidate. Opteron requires a flush after every write. n_call->wrote(0); // Patch 4th byte instr_addr[4] = code_buffer[4]; n_call->wrote(4); // Patch bytes 0-3 *(jint*)instr_addr = *(jint *)code_buffer; n_call->wrote(0); #ifdef ASSERT // verify patching for ( int i = 0; i < instruction_size; i++) { address ptr = (address)((intptr_t)code_buffer + i); int a_byte = (*ptr) & 0xFF; assert(*((address)((intptr_t)instr_addr + i)) == a_byte, "mt safe patching failed"); } #endif } // Similar to replace_mt_safe, but just changes the destination. The // important thing is that free-running threads are able to execute this // call instruction at all times. If the displacement field is aligned // we can simply rely on atomicity of 32-bit writes to make sure other threads // will see no intermediate states. Otherwise, the first two bytes of the // call are guaranteed to be aligned, and can be atomically patched to a // self-loop to guard the instruction while we change the other bytes. // We cannot rely on locks here, since the free-running threads must run at // full speed. // // Used in the runtime linkage of calls; see class CompiledIC. // (Cf. 4506997 and 4479829, where threads witnessed garbage displacements.) void NativeCall::set_destination_mt_safe(address dest) { debug_only(verify()); // Make sure patching code is locked. No two threads can patch at the same // time but one may be executing this code. assert(Patching_lock->is_locked() || SafepointSynchronize::is_at_safepoint(), "concurrent code patching"); // Both C1 and C2 should now be generating code which aligns the patched address // to be within a single cache line except that C1 does not do the alignment on // uniprocessor systems. bool is_aligned = ((uintptr_t)displacement_address() + 0) / cache_line_size == ((uintptr_t)displacement_address() + 3) / cache_line_size; guarantee(!os::is_MP() || is_aligned, "destination must be aligned"); if (is_aligned) { // Simple case: The destination lies within a single cache line. set_destination(dest); } else if ((uintptr_t)instruction_address() / cache_line_size == ((uintptr_t)instruction_address()+1) / cache_line_size) { // Tricky case: The instruction prefix lies within a single cache line. intptr_t disp = dest - return_address(); #ifdef AMD64 guarantee(disp == (intptr_t)(jint)disp, "must be 32-bit offset"); #endif // AMD64 int call_opcode = instruction_address()[0]; // First patch dummy jump in place: { u_char patch_jump[2]; patch_jump[0] = 0xEB; // jmp rel8 patch_jump[1] = 0xFE; // jmp to self assert(sizeof(patch_jump)==sizeof(short), "sanity check"); *(short*)instruction_address() = *(short*)patch_jump; } // Invalidate. Opteron requires a flush after every write. wrote(0); // (Note: We assume any reader which has already started to read // the unpatched call will completely read the whole unpatched call // without seeing the next writes we are about to make.) // Next, patch the last three bytes: u_char patch_disp[5]; patch_disp[0] = call_opcode; *(int32_t*)&patch_disp[1] = (int32_t)disp; assert(sizeof(patch_disp)==instruction_size, "sanity check"); for (int i = sizeof(short); i < instruction_size; i++) instruction_address()[i] = patch_disp[i]; // Invalidate. Opteron requires a flush after every write. wrote(sizeof(short)); // (Note: We assume that any reader which reads the opcode we are // about to repatch will also read the writes we just made.) // Finally, overwrite the jump: *(short*)instruction_address() = *(short*)patch_disp; // Invalidate. Opteron requires a flush after every write. wrote(0); debug_only(verify()); guarantee(destination() == dest, "patch succeeded"); } else { // Impossible: One or the other must be atomically writable. ShouldNotReachHere(); } } void NativeMovConstReg::verify() { #ifdef AMD64 // make sure code pattern is actually a mov reg64, imm64 instruction if ((ubyte_at(0) != Assembler::REX_W && ubyte_at(0) != Assembler::REX_WB) || (ubyte_at(1) & (0xff ^ register_mask)) != 0xB8) { print(); fatal("not a REX.W[B] mov reg64, imm64"); } #else // make sure code pattern is actually a mov reg, imm32 instruction u_char test_byte = *(u_char*)instruction_address(); u_char test_byte_2 = test_byte & ( 0xff ^ register_mask); if (test_byte_2 != instruction_code) fatal("not a mov reg, imm32"); #endif // AMD64 } void NativeMovConstReg::print() { tty->print_cr(PTR_FORMAT ": mov reg, " INTPTR_FORMAT, instruction_address(), data()); } //------------------------------------------------------------------- #ifndef AMD64 void NativeMovRegMem::copy_instruction_to(address new_instruction_address) { int inst_size = instruction_size; // See if there's an instruction size prefix override. if ( *(address(this)) == instruction_operandsize_prefix && *(address(this)+1) != instruction_code_xmm_code ) { // Not SSE instr inst_size += 1; } if ( *(address(this)) == instruction_extended_prefix ) inst_size += 1; for (int i = 0; i < instruction_size; i++) { *(new_instruction_address + i) = *(address(this) + i); } } void NativeMovRegMem::verify() { // make sure code pattern is actually a mov [reg+offset], reg instruction u_char test_byte = *(u_char*)instruction_address(); if ( ! ( (test_byte == instruction_code_reg2memb) || (test_byte == instruction_code_mem2regb) || (test_byte == instruction_code_mem2regl) || (test_byte == instruction_code_reg2meml) || (test_byte == instruction_code_mem2reg_movzxb ) || (test_byte == instruction_code_mem2reg_movzxw ) || (test_byte == instruction_code_mem2reg_movsxb ) || (test_byte == instruction_code_mem2reg_movsxw ) || (test_byte == instruction_code_float_s) || (test_byte == instruction_code_float_d) || (test_byte == instruction_code_long_volatile) ) ) { u_char byte1 = ((u_char*)instruction_address())[1]; u_char byte2 = ((u_char*)instruction_address())[2]; if ((test_byte != instruction_code_xmm_ss_prefix && test_byte != instruction_code_xmm_sd_prefix && test_byte != instruction_operandsize_prefix) || byte1 != instruction_code_xmm_code || (byte2 != instruction_code_xmm_load && byte2 != instruction_code_xmm_lpd && byte2 != instruction_code_xmm_store)) { fatal ("not a mov [reg+offs], reg instruction"); } } } void NativeMovRegMem::print() { tty->print_cr("0x%x: mov reg, [reg + %x]", instruction_address(), offset()); } //------------------------------------------------------------------- void NativeLoadAddress::verify() { // make sure code pattern is actually a mov [reg+offset], reg instruction u_char test_byte = *(u_char*)instruction_address(); if ( ! (test_byte == instruction_code) ) { fatal ("not a lea reg, [reg+offs] instruction"); } } void NativeLoadAddress::print() { tty->print_cr("0x%x: lea [reg + %x], reg", instruction_address(), offset()); } #endif // !AMD64 //-------------------------------------------------------------------------------- void NativeJump::verify() { if (*(u_char*)instruction_address() != instruction_code) { fatal("not a jump instruction"); } } void NativeJump::insert(address code_pos, address entry) { intptr_t disp = (intptr_t)entry - ((intptr_t)code_pos + 1 + 4); #ifdef AMD64 guarantee(disp == (intptr_t)(int32_t)disp, "must be 32-bit offset"); #endif // AMD64 *code_pos = instruction_code; *((int32_t*)(code_pos + 1)) = (int32_t)disp; ICache::invalidate_range(code_pos, instruction_size); } void NativeJump::check_verified_entry_alignment(address entry, address verified_entry) { // Patching to not_entrant can happen while activations of the method are // in use. The patching in that instance must happen only when certain // alignment restrictions are true. These guarantees check those // conditions. #ifdef AMD64 const int linesize = 64; #else const int linesize = 32; #endif // AMD64 // Must be wordSize aligned guarantee(((uintptr_t) verified_entry & (wordSize -1)) == 0, "illegal address for code patching 2"); // First 5 bytes must be within the same cache line - 4827828 guarantee((uintptr_t) verified_entry / linesize == ((uintptr_t) verified_entry + 4) / linesize, "illegal address for code patching 3"); } // MT safe inserting of a jump over an unknown instruction sequence (used by nmethod::makeZombie) // The problem: jmp <dest> is a 5-byte instruction. Atomical write can be only with 4 bytes. // First patches the first word atomically to be a jump to itself. // Then patches the last byte and then atomically patches the first word (4-bytes), // thus inserting the desired jump // This code is mt-safe with the following conditions: entry point is 4 byte aligned, // entry point is in same cache line as unverified entry point, and the instruction being // patched is >= 5 byte (size of patch). // // In C2 the 5+ byte sized instruction is enforced by code in MachPrologNode::emit. // In C1 the restriction is enforced by CodeEmitter::method_entry // void NativeJump::patch_verified_entry(address entry, address verified_entry, address dest) { // complete jump instruction (to be inserted) is in code_buffer; unsigned char code_buffer[5]; code_buffer[0] = instruction_code; intptr_t disp = (intptr_t)dest - ((intptr_t)verified_entry + 1 + 4); #ifdef AMD64 guarantee(disp == (intptr_t)(int32_t)disp, "must be 32-bit offset"); #endif // AMD64 *(int32_t*)(code_buffer + 1) = (int32_t)disp; check_verified_entry_alignment(entry, verified_entry); // Can't call nativeJump_at() because it's asserts jump exists NativeJump* n_jump = (NativeJump*) verified_entry; //First patch dummy jmp in place unsigned char patch[4]; assert(sizeof(patch)==sizeof(int32_t), "sanity check"); patch[0] = 0xEB; // jmp rel8 patch[1] = 0xFE; // jmp to self patch[2] = 0xEB; patch[3] = 0xFE; // First patch dummy jmp in place *(int32_t*)verified_entry = *(int32_t *)patch; n_jump->wrote(0); // Patch 5th byte (from jump instruction) verified_entry[4] = code_buffer[4]; n_jump->wrote(4); // Patch bytes 0-3 (from jump instruction) *(int32_t*)verified_entry = *(int32_t *)code_buffer; // Invalidate. Opteron requires a flush after every write. n_jump->wrote(0); } void NativePopReg::insert(address code_pos, Register reg) { assert(reg->encoding() < 8, "no space for REX"); assert(NativePopReg::instruction_size == sizeof(char), "right address unit for update"); *code_pos = (u_char)(instruction_code | reg->encoding()); ICache::invalidate_range(code_pos, instruction_size); } void NativeIllegalInstruction::insert(address code_pos) { assert(NativeIllegalInstruction::instruction_size == sizeof(short), "right address unit for update"); *(short *)code_pos = instruction_code; ICache::invalidate_range(code_pos, instruction_size); } void NativeGeneralJump::verify() { assert(((NativeInstruction *)this)->is_jump() || ((NativeInstruction *)this)->is_cond_jump(), "not a general jump instruction"); } void NativeGeneralJump::insert_unconditional(address code_pos, address entry) { intptr_t disp = (intptr_t)entry - ((intptr_t)code_pos + 1 + 4); #ifdef AMD64 guarantee(disp == (intptr_t)(int32_t)disp, "must be 32-bit offset"); #endif // AMD64 *code_pos = unconditional_long_jump; *((int32_t *)(code_pos+1)) = (int32_t) disp; ICache::invalidate_range(code_pos, instruction_size); } // MT-safe patching of a long jump instruction. // First patches first word of instruction to two jmp's that jmps to them // selfs (spinlock). Then patches the last byte, and then atomicly replaces // the jmp's with the first 4 byte of the new instruction. void NativeGeneralJump::replace_mt_safe(address instr_addr, address code_buffer) { assert (instr_addr != NULL, "illegal address for code patching (4)"); NativeGeneralJump* n_jump = nativeGeneralJump_at (instr_addr); // checking that it is a jump // Temporary code unsigned char patch[4]; assert(sizeof(patch)==sizeof(int32_t), "sanity check"); patch[0] = 0xEB; // jmp rel8 patch[1] = 0xFE; // jmp to self patch[2] = 0xEB; patch[3] = 0xFE; // First patch dummy jmp in place *(int32_t*)instr_addr = *(int32_t *)patch; n_jump->wrote(0); // Patch 4th byte instr_addr[4] = code_buffer[4]; n_jump->wrote(4); // Patch bytes 0-3 *(jint*)instr_addr = *(jint *)code_buffer; n_jump->wrote(0); #ifdef ASSERT // verify patching for ( int i = 0; i < instruction_size; i++) { address ptr = (address)((intptr_t)code_buffer + i); int a_byte = (*ptr) & 0xFF; assert(*((address)((intptr_t)instr_addr + i)) == a_byte, "mt safe patching failed"); } #endif } address NativeGeneralJump::jump_destination() const { int op_code = ubyte_at(0); bool is_rel32off = (op_code == 0xE9 || op_code == 0x0F); int offset = (op_code == 0x0F) ? 2 : 1; int length = offset + ((is_rel32off) ? 4 : 1); if (is_rel32off) return addr_at(0) + length + int_at(offset); else return addr_at(0) + length + sbyte_at(offset); } bool NativeInstruction::is_dtrace_trap() { return (*(int32_t*)this & 0xff) == 0xcc; }