Mercurial > hg > truffle
annotate src/share/vm/c1/c1_IR.cpp @ 16704:3cd605c98060
NFI: cleanup
author | Matthias Grimmer <grimmer@ssw.jku.at> |
---|---|
date | Wed, 06 Aug 2014 08:27:42 +0200 |
parents | 4ca6dc0799b6 |
children | 89152779163c |
rev | line source |
---|---|
0 | 1 /* |
14909 | 2 * Copyright (c) 1999, 2012, Oracle and/or its affiliates. All rights reserved. |
0 | 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
4 * | |
5 * This code is free software; you can redistribute it and/or modify it | |
6 * under the terms of the GNU General Public License version 2 only, as | |
7 * published by the Free Software Foundation. | |
8 * | |
9 * This code is distributed in the hope that it will be useful, but WITHOUT | |
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 * version 2 for more details (a copy is included in the LICENSE file that | |
13 * accompanied this code). | |
14 * | |
15 * You should have received a copy of the GNU General Public License version | |
16 * 2 along with this work; if not, write to the Free Software Foundation, | |
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
18 * | |
1552
c18cbe5936b8
6941466: Oracle rebranding changes for Hotspot repositories
trims
parents:
1295
diff
changeset
|
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
c18cbe5936b8
6941466: Oracle rebranding changes for Hotspot repositories
trims
parents:
1295
diff
changeset
|
20 * or visit www.oracle.com if you need additional information or have any |
c18cbe5936b8
6941466: Oracle rebranding changes for Hotspot repositories
trims
parents:
1295
diff
changeset
|
21 * questions. |
0 | 22 * |
23 */ | |
24 | |
1972 | 25 #include "precompiled.hpp" |
26 #include "c1/c1_Compilation.hpp" | |
27 #include "c1/c1_FrameMap.hpp" | |
28 #include "c1/c1_GraphBuilder.hpp" | |
29 #include "c1/c1_IR.hpp" | |
30 #include "c1/c1_InstructionPrinter.hpp" | |
31 #include "c1/c1_Optimizer.hpp" | |
32 #include "utilities/bitMap.inline.hpp" | |
0 | 33 |
34 | |
35 // Implementation of XHandlers | |
36 // | |
37 // Note: This code could eventually go away if we are | |
38 // just using the ciExceptionHandlerStream. | |
39 | |
40 XHandlers::XHandlers(ciMethod* method) : _list(method->exception_table_length()) { | |
41 ciExceptionHandlerStream s(method); | |
42 while (!s.is_done()) { | |
43 _list.append(new XHandler(s.handler())); | |
44 s.next(); | |
45 } | |
46 assert(s.count() == method->exception_table_length(), "exception table lengths inconsistent"); | |
47 } | |
48 | |
49 // deep copy of all XHandler contained in list | |
50 XHandlers::XHandlers(XHandlers* other) : | |
51 _list(other->length()) | |
52 { | |
53 for (int i = 0; i < other->length(); i++) { | |
54 _list.append(new XHandler(other->handler_at(i))); | |
55 } | |
56 } | |
57 | |
58 // Returns whether a particular exception type can be caught. Also | |
59 // returns true if klass is unloaded or any exception handler | |
60 // classes are unloaded. type_is_exact indicates whether the throw | |
61 // is known to be exactly that class or it might throw a subtype. | |
62 bool XHandlers::could_catch(ciInstanceKlass* klass, bool type_is_exact) const { | |
63 // the type is unknown so be conservative | |
64 if (!klass->is_loaded()) { | |
65 return true; | |
66 } | |
67 | |
68 for (int i = 0; i < length(); i++) { | |
69 XHandler* handler = handler_at(i); | |
70 if (handler->is_catch_all()) { | |
71 // catch of ANY | |
72 return true; | |
73 } | |
74 ciInstanceKlass* handler_klass = handler->catch_klass(); | |
75 // if it's unknown it might be catchable | |
76 if (!handler_klass->is_loaded()) { | |
77 return true; | |
78 } | |
79 // if the throw type is definitely a subtype of the catch type | |
80 // then it can be caught. | |
81 if (klass->is_subtype_of(handler_klass)) { | |
82 return true; | |
83 } | |
84 if (!type_is_exact) { | |
85 // If the type isn't exactly known then it can also be caught by | |
86 // catch statements where the inexact type is a subtype of the | |
87 // catch type. | |
88 // given: foo extends bar extends Exception | |
89 // throw bar can be caught by catch foo, catch bar, and catch | |
90 // Exception, however it can't be caught by any handlers without | |
91 // bar in its type hierarchy. | |
92 if (handler_klass->is_subtype_of(klass)) { | |
93 return true; | |
94 } | |
95 } | |
96 } | |
97 | |
98 return false; | |
99 } | |
100 | |
101 | |
102 bool XHandlers::equals(XHandlers* others) const { | |
103 if (others == NULL) return false; | |
104 if (length() != others->length()) return false; | |
105 | |
106 for (int i = 0; i < length(); i++) { | |
107 if (!handler_at(i)->equals(others->handler_at(i))) return false; | |
108 } | |
109 return true; | |
110 } | |
111 | |
112 bool XHandler::equals(XHandler* other) const { | |
113 assert(entry_pco() != -1 && other->entry_pco() != -1, "must have entry_pco"); | |
114 | |
115 if (entry_pco() != other->entry_pco()) return false; | |
116 if (scope_count() != other->scope_count()) return false; | |
117 if (_desc != other->_desc) return false; | |
118 | |
119 assert(entry_block() == other->entry_block(), "entry_block must be equal when entry_pco is equal"); | |
120 return true; | |
121 } | |
122 | |
123 | |
124 // Implementation of IRScope | |
125 BlockBegin* IRScope::build_graph(Compilation* compilation, int osr_bci) { | |
126 GraphBuilder gm(compilation, this); | |
127 NOT_PRODUCT(if (PrintValueNumbering && Verbose) gm.print_stats()); | |
128 if (compilation->bailed_out()) return NULL; | |
129 return gm.start(); | |
130 } | |
131 | |
132 | |
133 IRScope::IRScope(Compilation* compilation, IRScope* caller, int caller_bci, ciMethod* method, int osr_bci, bool create_graph) | |
134 : _callees(2) | |
135 , _compilation(compilation) | |
136 , _requires_phi_function(method->max_locals()) | |
137 { | |
138 _caller = caller; | |
139 _level = caller == NULL ? 0 : caller->level() + 1; | |
140 _method = method; | |
141 _xhandlers = new XHandlers(method); | |
142 _number_of_locks = 0; | |
143 _monitor_pairing_ok = method->has_balanced_monitors(); | |
4966
701a83c86f28
7120481: storeStore barrier in constructor with final field
jiangli
parents:
2007
diff
changeset
|
144 _wrote_final = false; |
0 | 145 _start = NULL; |
146 | |
147 if (osr_bci == -1) { | |
148 _requires_phi_function.clear(); | |
149 } else { | |
150 // selective creation of phi functions is not possibel in osr-methods | |
151 _requires_phi_function.set_range(0, method->max_locals()); | |
152 } | |
153 | |
154 assert(method->holder()->is_loaded() , "method holder must be loaded"); | |
155 | |
156 // build graph if monitor pairing is ok | |
157 if (create_graph && monitor_pairing_ok()) _start = build_graph(compilation, osr_bci); | |
158 } | |
159 | |
160 | |
161 int IRScope::max_stack() const { | |
162 int my_max = method()->max_stack(); | |
163 int callee_max = 0; | |
164 for (int i = 0; i < number_of_callees(); i++) { | |
165 callee_max = MAX2(callee_max, callee_no(i)->max_stack()); | |
166 } | |
167 return my_max + callee_max; | |
168 } | |
169 | |
170 | |
900
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
171 bool IRScopeDebugInfo::should_reexecute() { |
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
172 ciMethod* cur_method = scope()->method(); |
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
173 int cur_bci = bci(); |
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
174 if (cur_method != NULL && cur_bci != SynchronizationEntryBCI) { |
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
175 Bytecodes::Code code = cur_method->java_code_at_bci(cur_bci); |
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
176 return Interpreter::bytecode_should_reexecute(code); |
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
177 } else |
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
178 return false; |
9987d9d5eb0e
6833129: specjvm98 fails with NullPointerException in the compiler with -XX:DeoptimizeALot
cfang
parents:
470
diff
changeset
|
179 } |
0 | 180 |
181 | |
182 // Implementation of CodeEmitInfo | |
183 | |
184 // Stack must be NON-null | |
8860 | 185 CodeEmitInfo::CodeEmitInfo(ValueStack* stack, XHandlers* exception_handlers, bool deoptimize_on_exception) |
0 | 186 : _scope(stack->scope()) |
187 , _scope_debug_info(NULL) | |
188 , _oop_map(NULL) | |
189 , _stack(stack) | |
190 , _exception_handlers(exception_handlers) | |
8860 | 191 , _is_method_handle_invoke(false) |
192 , _deoptimize_on_exception(deoptimize_on_exception) { | |
0 | 193 assert(_stack != NULL, "must be non null"); |
194 } | |
195 | |
196 | |
1819 | 197 CodeEmitInfo::CodeEmitInfo(CodeEmitInfo* info, ValueStack* stack) |
0 | 198 : _scope(info->_scope) |
199 , _exception_handlers(NULL) | |
200 , _scope_debug_info(NULL) | |
1564 | 201 , _oop_map(NULL) |
1819 | 202 , _stack(stack == NULL ? info->_stack : stack) |
8860 | 203 , _is_method_handle_invoke(info->_is_method_handle_invoke) |
204 , _deoptimize_on_exception(info->_deoptimize_on_exception) { | |
0 | 205 |
206 // deep copy of exception handlers | |
207 if (info->_exception_handlers != NULL) { | |
208 _exception_handlers = new XHandlers(info->_exception_handlers); | |
209 } | |
210 } | |
211 | |
212 | |
1564 | 213 void CodeEmitInfo::record_debug_info(DebugInformationRecorder* recorder, int pc_offset) { |
0 | 214 // record the safepoint before recording the debug info for enclosing scopes |
215 recorder->add_safepoint(pc_offset, _oop_map->deep_copy()); | |
1564 | 216 _scope_debug_info->record_debug_info(recorder, pc_offset, true/*topmost*/, _is_method_handle_invoke); |
0 | 217 recorder->end_safepoint(pc_offset); |
218 } | |
219 | |
220 | |
221 void CodeEmitInfo::add_register_oop(LIR_Opr opr) { | |
222 assert(_oop_map != NULL, "oop map must already exist"); | |
223 assert(opr->is_single_cpu(), "should not call otherwise"); | |
224 | |
225 VMReg name = frame_map()->regname(opr); | |
226 _oop_map->set_oop(name); | |
227 } | |
228 | |
229 | |
230 | |
231 | |
232 // Implementation of IR | |
233 | |
234 IR::IR(Compilation* compilation, ciMethod* method, int osr_bci) : | |
235 _locals_size(in_WordSize(-1)) | |
236 , _num_loops(0) { | |
237 // setup IR fields | |
238 _compilation = compilation; | |
239 _top_scope = new IRScope(compilation, NULL, -1, method, osr_bci, true); | |
240 _code = NULL; | |
241 } | |
242 | |
243 | |
8860 | 244 void IR::optimize_blocks() { |
0 | 245 Optimizer opt(this); |
1783 | 246 if (!compilation()->profile_branches()) { |
247 if (DoCEE) { | |
248 opt.eliminate_conditional_expressions(); | |
0 | 249 #ifndef PRODUCT |
1783 | 250 if (PrintCFG || PrintCFG1) { tty->print_cr("CFG after CEE"); print(true); } |
251 if (PrintIR || PrintIR1 ) { tty->print_cr("IR after CEE"); print(false); } | |
0 | 252 #endif |
1783 | 253 } |
254 if (EliminateBlocks) { | |
255 opt.eliminate_blocks(); | |
0 | 256 #ifndef PRODUCT |
1783 | 257 if (PrintCFG || PrintCFG1) { tty->print_cr("CFG after block elimination"); print(true); } |
258 if (PrintIR || PrintIR1 ) { tty->print_cr("IR after block elimination"); print(false); } | |
0 | 259 #endif |
1783 | 260 } |
0 | 261 } |
8860 | 262 } |
263 | |
264 void IR::eliminate_null_checks() { | |
265 Optimizer opt(this); | |
0 | 266 if (EliminateNullChecks) { |
267 opt.eliminate_null_checks(); | |
268 #ifndef PRODUCT | |
269 if (PrintCFG || PrintCFG1) { tty->print_cr("CFG after null check elimination"); print(true); } | |
270 if (PrintIR || PrintIR1 ) { tty->print_cr("IR after null check elimination"); print(false); } | |
271 #endif | |
272 } | |
273 } | |
274 | |
275 | |
276 static int sort_pairs(BlockPair** a, BlockPair** b) { | |
277 if ((*a)->from() == (*b)->from()) { | |
278 return (*a)->to()->block_id() - (*b)->to()->block_id(); | |
279 } else { | |
280 return (*a)->from()->block_id() - (*b)->from()->block_id(); | |
281 } | |
282 } | |
283 | |
284 | |
285 class CriticalEdgeFinder: public BlockClosure { | |
286 BlockPairList blocks; | |
287 IR* _ir; | |
288 | |
289 public: | |
290 CriticalEdgeFinder(IR* ir): _ir(ir) {} | |
291 void block_do(BlockBegin* bb) { | |
292 BlockEnd* be = bb->end(); | |
293 int nos = be->number_of_sux(); | |
294 if (nos >= 2) { | |
295 for (int i = 0; i < nos; i++) { | |
296 BlockBegin* sux = be->sux_at(i); | |
297 if (sux->number_of_preds() >= 2) { | |
298 blocks.append(new BlockPair(bb, sux)); | |
299 } | |
300 } | |
301 } | |
302 } | |
303 | |
304 void split_edges() { | |
305 BlockPair* last_pair = NULL; | |
306 blocks.sort(sort_pairs); | |
307 for (int i = 0; i < blocks.length(); i++) { | |
308 BlockPair* pair = blocks.at(i); | |
309 if (last_pair != NULL && pair->is_same(last_pair)) continue; | |
310 BlockBegin* from = pair->from(); | |
311 BlockBegin* to = pair->to(); | |
312 BlockBegin* split = from->insert_block_between(to); | |
313 #ifndef PRODUCT | |
314 if ((PrintIR || PrintIR1) && Verbose) { | |
315 tty->print_cr("Split critical edge B%d -> B%d (new block B%d)", | |
316 from->block_id(), to->block_id(), split->block_id()); | |
317 } | |
318 #endif | |
319 last_pair = pair; | |
320 } | |
321 } | |
322 }; | |
323 | |
324 void IR::split_critical_edges() { | |
325 CriticalEdgeFinder cef(this); | |
326 | |
327 iterate_preorder(&cef); | |
328 cef.split_edges(); | |
329 } | |
330 | |
331 | |
1584 | 332 class UseCountComputer: public ValueVisitor, BlockClosure { |
0 | 333 private: |
1584 | 334 void visit(Value* n) { |
0 | 335 // Local instructions and Phis for expression stack values at the |
336 // start of basic blocks are not added to the instruction list | |
1899 | 337 if (!(*n)->is_linked() && (*n)->can_be_linked()) { |
0 | 338 assert(false, "a node was not appended to the graph"); |
1584 | 339 Compilation::current()->bailout("a node was not appended to the graph"); |
0 | 340 } |
341 // use n's input if not visited before | |
342 if (!(*n)->is_pinned() && !(*n)->has_uses()) { | |
343 // note: a) if the instruction is pinned, it will be handled by compute_use_count | |
344 // b) if the instruction has uses, it was touched before | |
345 // => in both cases we don't need to update n's values | |
346 uses_do(n); | |
347 } | |
348 // use n | |
349 (*n)->_use_count++; | |
350 } | |
351 | |
1584 | 352 Values* worklist; |
353 int depth; | |
0 | 354 enum { |
355 max_recurse_depth = 20 | |
356 }; | |
357 | |
1584 | 358 void uses_do(Value* n) { |
0 | 359 depth++; |
360 if (depth > max_recurse_depth) { | |
361 // don't allow the traversal to recurse too deeply | |
362 worklist->push(*n); | |
363 } else { | |
1584 | 364 (*n)->input_values_do(this); |
0 | 365 // special handling for some instructions |
366 if ((*n)->as_BlockEnd() != NULL) { | |
367 // note on BlockEnd: | |
368 // must 'use' the stack only if the method doesn't | |
369 // terminate, however, in those cases stack is empty | |
1584 | 370 (*n)->state_values_do(this); |
0 | 371 } |
372 } | |
373 depth--; | |
374 } | |
375 | |
1584 | 376 void block_do(BlockBegin* b) { |
0 | 377 depth = 0; |
378 // process all pinned nodes as the roots of expression trees | |
379 for (Instruction* n = b; n != NULL; n = n->next()) { | |
380 if (n->is_pinned()) uses_do(&n); | |
381 } | |
382 assert(depth == 0, "should have counted back down"); | |
383 | |
384 // now process any unpinned nodes which recursed too deeply | |
385 while (worklist->length() > 0) { | |
386 Value t = worklist->pop(); | |
387 if (!t->is_pinned()) { | |
388 // compute the use count | |
389 uses_do(&t); | |
390 | |
391 // pin the instruction so that LIRGenerator doesn't recurse | |
392 // too deeply during it's evaluation. | |
393 t->pin(); | |
394 } | |
395 } | |
396 assert(depth == 0, "should have counted back down"); | |
397 } | |
398 | |
1584 | 399 UseCountComputer() { |
400 worklist = new Values(); | |
401 depth = 0; | |
402 } | |
403 | |
0 | 404 public: |
405 static void compute(BlockList* blocks) { | |
1584 | 406 UseCountComputer ucc; |
407 blocks->iterate_backward(&ucc); | |
0 | 408 } |
409 }; | |
410 | |
411 | |
412 // helper macro for short definition of trace-output inside code | |
413 #ifndef PRODUCT | |
414 #define TRACE_LINEAR_SCAN(level, code) \ | |
415 if (TraceLinearScanLevel >= level) { \ | |
416 code; \ | |
417 } | |
418 #else | |
419 #define TRACE_LINEAR_SCAN(level, code) | |
420 #endif | |
421 | |
422 class ComputeLinearScanOrder : public StackObj { | |
423 private: | |
424 int _max_block_id; // the highest block_id of a block | |
425 int _num_blocks; // total number of blocks (smaller than _max_block_id) | |
426 int _num_loops; // total number of loops | |
427 bool _iterative_dominators;// method requires iterative computation of dominatiors | |
428 | |
429 BlockList* _linear_scan_order; // the resulting list of blocks in correct order | |
430 | |
431 BitMap _visited_blocks; // used for recursive processing of blocks | |
432 BitMap _active_blocks; // used for recursive processing of blocks | |
433 BitMap _dominator_blocks; // temproary BitMap used for computation of dominator | |
434 intArray _forward_branches; // number of incoming forward branches for each block | |
435 BlockList _loop_end_blocks; // list of all loop end blocks collected during count_edges | |
436 BitMap2D _loop_map; // two-dimensional bit set: a bit is set if a block is contained in a loop | |
437 BlockList _work_list; // temporary list (used in mark_loops and compute_order) | |
8860 | 438 BlockList _loop_headers; |
0 | 439 |
1783 | 440 Compilation* _compilation; |
441 | |
0 | 442 // accessors for _visited_blocks and _active_blocks |
443 void init_visited() { _active_blocks.clear(); _visited_blocks.clear(); } | |
444 bool is_visited(BlockBegin* b) const { return _visited_blocks.at(b->block_id()); } | |
445 bool is_active(BlockBegin* b) const { return _active_blocks.at(b->block_id()); } | |
446 void set_visited(BlockBegin* b) { assert(!is_visited(b), "already set"); _visited_blocks.set_bit(b->block_id()); } | |
447 void set_active(BlockBegin* b) { assert(!is_active(b), "already set"); _active_blocks.set_bit(b->block_id()); } | |
448 void clear_active(BlockBegin* b) { assert(is_active(b), "not already"); _active_blocks.clear_bit(b->block_id()); } | |
449 | |
450 // accessors for _forward_branches | |
451 void inc_forward_branches(BlockBegin* b) { _forward_branches.at_put(b->block_id(), _forward_branches.at(b->block_id()) + 1); } | |
452 int dec_forward_branches(BlockBegin* b) { _forward_branches.at_put(b->block_id(), _forward_branches.at(b->block_id()) - 1); return _forward_branches.at(b->block_id()); } | |
453 | |
454 // accessors for _loop_map | |
455 bool is_block_in_loop (int loop_idx, BlockBegin* b) const { return _loop_map.at(loop_idx, b->block_id()); } | |
456 void set_block_in_loop (int loop_idx, BlockBegin* b) { _loop_map.set_bit(loop_idx, b->block_id()); } | |
457 void clear_block_in_loop(int loop_idx, int block_id) { _loop_map.clear_bit(loop_idx, block_id); } | |
458 | |
459 // count edges between blocks | |
460 void count_edges(BlockBegin* cur, BlockBegin* parent); | |
461 | |
462 // loop detection | |
463 void mark_loops(); | |
464 void clear_non_natural_loops(BlockBegin* start_block); | |
465 void assign_loop_depth(BlockBegin* start_block); | |
466 | |
467 // computation of final block order | |
468 BlockBegin* common_dominator(BlockBegin* a, BlockBegin* b); | |
469 void compute_dominator(BlockBegin* cur, BlockBegin* parent); | |
470 int compute_weight(BlockBegin* cur); | |
471 bool ready_for_processing(BlockBegin* cur); | |
472 void sort_into_work_list(BlockBegin* b); | |
473 void append_block(BlockBegin* cur); | |
474 void compute_order(BlockBegin* start_block); | |
475 | |
476 // fixup of dominators for non-natural loops | |
477 bool compute_dominators_iter(); | |
478 void compute_dominators(); | |
479 | |
480 // debug functions | |
481 NOT_PRODUCT(void print_blocks();) | |
482 DEBUG_ONLY(void verify();) | |
483 | |
1783 | 484 Compilation* compilation() const { return _compilation; } |
0 | 485 public: |
1783 | 486 ComputeLinearScanOrder(Compilation* c, BlockBegin* start_block); |
0 | 487 |
488 // accessors for final result | |
489 BlockList* linear_scan_order() const { return _linear_scan_order; } | |
490 int num_loops() const { return _num_loops; } | |
491 }; | |
492 | |
493 | |
1783 | 494 ComputeLinearScanOrder::ComputeLinearScanOrder(Compilation* c, BlockBegin* start_block) : |
0 | 495 _max_block_id(BlockBegin::number_of_blocks()), |
496 _num_blocks(0), | |
497 _num_loops(0), | |
498 _iterative_dominators(false), | |
499 _visited_blocks(_max_block_id), | |
500 _active_blocks(_max_block_id), | |
501 _dominator_blocks(_max_block_id), | |
502 _forward_branches(_max_block_id, 0), | |
503 _loop_end_blocks(8), | |
504 _work_list(8), | |
505 _linear_scan_order(NULL), // initialized later with correct size | |
1783 | 506 _loop_map(0, 0), // initialized later with correct size |
507 _compilation(c) | |
0 | 508 { |
10973
ef57c43512d6
8014431: cleanup warnings indicated by the -Wunused-value compiler option on linux
ccheung
parents:
8860
diff
changeset
|
509 TRACE_LINEAR_SCAN(2, tty->print_cr("***** computing linear-scan block order")); |
0 | 510 |
511 init_visited(); | |
512 count_edges(start_block, NULL); | |
513 | |
1783 | 514 if (compilation()->is_profiling()) { |
2007
5ddfcf4b079e
7003554: (tiered) assert(is_null_object() || handle() != NULL) failed: cannot embed null pointer
iveresov
parents:
1972
diff
changeset
|
515 ciMethod *method = compilation()->method(); |
5ddfcf4b079e
7003554: (tiered) assert(is_null_object() || handle() != NULL) failed: cannot embed null pointer
iveresov
parents:
1972
diff
changeset
|
516 if (!method->is_accessor()) { |
5ddfcf4b079e
7003554: (tiered) assert(is_null_object() || handle() != NULL) failed: cannot embed null pointer
iveresov
parents:
1972
diff
changeset
|
517 ciMethodData* md = method->method_data_or_null(); |
5ddfcf4b079e
7003554: (tiered) assert(is_null_object() || handle() != NULL) failed: cannot embed null pointer
iveresov
parents:
1972
diff
changeset
|
518 assert(md != NULL, "Sanity"); |
5ddfcf4b079e
7003554: (tiered) assert(is_null_object() || handle() != NULL) failed: cannot embed null pointer
iveresov
parents:
1972
diff
changeset
|
519 md->set_compilation_stats(_num_loops, _num_blocks); |
5ddfcf4b079e
7003554: (tiered) assert(is_null_object() || handle() != NULL) failed: cannot embed null pointer
iveresov
parents:
1972
diff
changeset
|
520 } |
1783 | 521 } |
522 | |
0 | 523 if (_num_loops > 0) { |
524 mark_loops(); | |
525 clear_non_natural_loops(start_block); | |
526 assign_loop_depth(start_block); | |
527 } | |
528 | |
529 compute_order(start_block); | |
530 compute_dominators(); | |
531 | |
532 NOT_PRODUCT(print_blocks()); | |
533 DEBUG_ONLY(verify()); | |
534 } | |
535 | |
536 | |
537 // Traverse the CFG: | |
538 // * count total number of blocks | |
539 // * count all incoming edges and backward incoming edges | |
540 // * number loop header blocks | |
541 // * create a list with all loop end blocks | |
542 void ComputeLinearScanOrder::count_edges(BlockBegin* cur, BlockBegin* parent) { | |
543 TRACE_LINEAR_SCAN(3, tty->print_cr("Enter count_edges for block B%d coming from B%d", cur->block_id(), parent != NULL ? parent->block_id() : -1)); | |
544 assert(cur->dominator() == NULL, "dominator already initialized"); | |
545 | |
546 if (is_active(cur)) { | |
547 TRACE_LINEAR_SCAN(3, tty->print_cr("backward branch")); | |
548 assert(is_visited(cur), "block must be visisted when block is active"); | |
549 assert(parent != NULL, "must have parent"); | |
550 | |
551 cur->set(BlockBegin::linear_scan_loop_header_flag); | |
552 cur->set(BlockBegin::backward_branch_target_flag); | |
553 | |
554 parent->set(BlockBegin::linear_scan_loop_end_flag); | |
428
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
555 |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
556 // When a loop header is also the start of an exception handler, then the backward branch is |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
557 // an exception edge. Because such edges are usually critical edges which cannot be split, the |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
558 // loop must be excluded here from processing. |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
559 if (cur->is_set(BlockBegin::exception_entry_flag)) { |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
560 // Make sure that dominators are correct in this weird situation |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
561 _iterative_dominators = true; |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
562 return; |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
563 } |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
564 assert(parent->number_of_sux() == 1 && parent->sux_at(0) == cur, |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
565 "loop end blocks must have one successor (critical edges are split)"); |
334969144810
6758445: loop heads that are exception entry points can crash during count_edges/mark_loops
never
parents:
0
diff
changeset
|
566 |
0 | 567 _loop_end_blocks.append(parent); |
568 return; | |
569 } | |
570 | |
571 // increment number of incoming forward branches | |
572 inc_forward_branches(cur); | |
573 | |
574 if (is_visited(cur)) { | |
575 TRACE_LINEAR_SCAN(3, tty->print_cr("block already visited")); | |
576 return; | |
577 } | |
578 | |
579 _num_blocks++; | |
580 set_visited(cur); | |
581 set_active(cur); | |
582 | |
583 // recursive call for all successors | |
584 int i; | |
585 for (i = cur->number_of_sux() - 1; i >= 0; i--) { | |
586 count_edges(cur->sux_at(i), cur); | |
587 } | |
588 for (i = cur->number_of_exception_handlers() - 1; i >= 0; i--) { | |
589 count_edges(cur->exception_handler_at(i), cur); | |
590 } | |
591 | |
592 clear_active(cur); | |
593 | |
594 // Each loop has a unique number. | |
595 // When multiple loops are nested, assign_loop_depth assumes that the | |
596 // innermost loop has the lowest number. This is guaranteed by setting | |
597 // the loop number after the recursive calls for the successors above | |
598 // have returned. | |
599 if (cur->is_set(BlockBegin::linear_scan_loop_header_flag)) { | |
600 assert(cur->loop_index() == -1, "cannot set loop-index twice"); | |
601 TRACE_LINEAR_SCAN(3, tty->print_cr("Block B%d is loop header of loop %d", cur->block_id(), _num_loops)); | |
602 | |
603 cur->set_loop_index(_num_loops); | |
8860 | 604 _loop_headers.append(cur); |
0 | 605 _num_loops++; |
606 } | |
607 | |
608 TRACE_LINEAR_SCAN(3, tty->print_cr("Finished count_edges for block B%d", cur->block_id())); | |
609 } | |
610 | |
611 | |
612 void ComputeLinearScanOrder::mark_loops() { | |
613 TRACE_LINEAR_SCAN(3, tty->print_cr("----- marking loops")); | |
614 | |
615 _loop_map = BitMap2D(_num_loops, _max_block_id); | |
616 _loop_map.clear(); | |
617 | |
618 for (int i = _loop_end_blocks.length() - 1; i >= 0; i--) { | |
619 BlockBegin* loop_end = _loop_end_blocks.at(i); | |
620 BlockBegin* loop_start = loop_end->sux_at(0); | |
621 int loop_idx = loop_start->loop_index(); | |
622 | |
623 TRACE_LINEAR_SCAN(3, tty->print_cr("Processing loop from B%d to B%d (loop %d):", loop_start->block_id(), loop_end->block_id(), loop_idx)); | |
624 assert(loop_end->is_set(BlockBegin::linear_scan_loop_end_flag), "loop end flag must be set"); | |
625 assert(loop_end->number_of_sux() == 1, "incorrect number of successors"); | |
626 assert(loop_start->is_set(BlockBegin::linear_scan_loop_header_flag), "loop header flag must be set"); | |
627 assert(loop_idx >= 0 && loop_idx < _num_loops, "loop index not set"); | |
628 assert(_work_list.is_empty(), "work list must be empty before processing"); | |
629 | |
630 // add the end-block of the loop to the working list | |
631 _work_list.push(loop_end); | |
632 set_block_in_loop(loop_idx, loop_end); | |
633 do { | |
634 BlockBegin* cur = _work_list.pop(); | |
635 | |
636 TRACE_LINEAR_SCAN(3, tty->print_cr(" processing B%d", cur->block_id())); | |
637 assert(is_block_in_loop(loop_idx, cur), "bit in loop map must be set when block is in work list"); | |
638 | |
639 // recursive processing of all predecessors ends when start block of loop is reached | |
640 if (cur != loop_start && !cur->is_set(BlockBegin::osr_entry_flag)) { | |
641 for (int j = cur->number_of_preds() - 1; j >= 0; j--) { | |
642 BlockBegin* pred = cur->pred_at(j); | |
643 | |
644 if (!is_block_in_loop(loop_idx, pred) /*&& !pred->is_set(BlockBeginosr_entry_flag)*/) { | |
645 // this predecessor has not been processed yet, so add it to work list | |
646 TRACE_LINEAR_SCAN(3, tty->print_cr(" pushing B%d", pred->block_id())); | |
647 _work_list.push(pred); | |
648 set_block_in_loop(loop_idx, pred); | |
649 } | |
650 } | |
651 } | |
652 } while (!_work_list.is_empty()); | |
653 } | |
654 } | |
655 | |
656 | |
657 // check for non-natural loops (loops where the loop header does not dominate | |
658 // all other loop blocks = loops with mulitple entries). | |
659 // such loops are ignored | |
660 void ComputeLinearScanOrder::clear_non_natural_loops(BlockBegin* start_block) { | |
661 for (int i = _num_loops - 1; i >= 0; i--) { | |
662 if (is_block_in_loop(i, start_block)) { | |
663 // loop i contains the entry block of the method | |
664 // -> this is not a natural loop, so ignore it | |
665 TRACE_LINEAR_SCAN(2, tty->print_cr("Loop %d is non-natural, so it is ignored", i)); | |
666 | |
8860 | 667 BlockBegin *loop_header = _loop_headers.at(i); |
668 assert(loop_header->is_set(BlockBegin::linear_scan_loop_header_flag), "Must be loop header"); | |
669 | |
670 for (int j = 0; j < loop_header->number_of_preds(); j++) { | |
671 BlockBegin *pred = loop_header->pred_at(j); | |
672 pred->clear(BlockBegin::linear_scan_loop_end_flag); | |
673 } | |
674 | |
675 loop_header->clear(BlockBegin::linear_scan_loop_header_flag); | |
676 | |
0 | 677 for (int block_id = _max_block_id - 1; block_id >= 0; block_id--) { |
678 clear_block_in_loop(i, block_id); | |
679 } | |
680 _iterative_dominators = true; | |
681 } | |
682 } | |
683 } | |
684 | |
685 void ComputeLinearScanOrder::assign_loop_depth(BlockBegin* start_block) { | |
10973
ef57c43512d6
8014431: cleanup warnings indicated by the -Wunused-value compiler option on linux
ccheung
parents:
8860
diff
changeset
|
686 TRACE_LINEAR_SCAN(3, tty->print_cr("----- computing loop-depth and weight")); |
0 | 687 init_visited(); |
688 | |
689 assert(_work_list.is_empty(), "work list must be empty before processing"); | |
690 _work_list.append(start_block); | |
691 | |
692 do { | |
693 BlockBegin* cur = _work_list.pop(); | |
694 | |
695 if (!is_visited(cur)) { | |
696 set_visited(cur); | |
697 TRACE_LINEAR_SCAN(4, tty->print_cr("Computing loop depth for block B%d", cur->block_id())); | |
698 | |
699 // compute loop-depth and loop-index for the block | |
700 assert(cur->loop_depth() == 0, "cannot set loop-depth twice"); | |
701 int i; | |
702 int loop_depth = 0; | |
703 int min_loop_idx = -1; | |
704 for (i = _num_loops - 1; i >= 0; i--) { | |
705 if (is_block_in_loop(i, cur)) { | |
706 loop_depth++; | |
707 min_loop_idx = i; | |
708 } | |
709 } | |
710 cur->set_loop_depth(loop_depth); | |
711 cur->set_loop_index(min_loop_idx); | |
712 | |
713 // append all unvisited successors to work list | |
714 for (i = cur->number_of_sux() - 1; i >= 0; i--) { | |
715 _work_list.append(cur->sux_at(i)); | |
716 } | |
717 for (i = cur->number_of_exception_handlers() - 1; i >= 0; i--) { | |
718 _work_list.append(cur->exception_handler_at(i)); | |
719 } | |
720 } | |
721 } while (!_work_list.is_empty()); | |
722 } | |
723 | |
724 | |
725 BlockBegin* ComputeLinearScanOrder::common_dominator(BlockBegin* a, BlockBegin* b) { | |
726 assert(a != NULL && b != NULL, "must have input blocks"); | |
727 | |
728 _dominator_blocks.clear(); | |
729 while (a != NULL) { | |
730 _dominator_blocks.set_bit(a->block_id()); | |
731 assert(a->dominator() != NULL || a == _linear_scan_order->at(0), "dominator must be initialized"); | |
732 a = a->dominator(); | |
733 } | |
734 while (b != NULL && !_dominator_blocks.at(b->block_id())) { | |
735 assert(b->dominator() != NULL || b == _linear_scan_order->at(0), "dominator must be initialized"); | |
736 b = b->dominator(); | |
737 } | |
738 | |
739 assert(b != NULL, "could not find dominator"); | |
740 return b; | |
741 } | |
742 | |
743 void ComputeLinearScanOrder::compute_dominator(BlockBegin* cur, BlockBegin* parent) { | |
744 if (cur->dominator() == NULL) { | |
745 TRACE_LINEAR_SCAN(4, tty->print_cr("DOM: initializing dominator of B%d to B%d", cur->block_id(), parent->block_id())); | |
746 cur->set_dominator(parent); | |
747 | |
748 } else if (!(cur->is_set(BlockBegin::linear_scan_loop_header_flag) && parent->is_set(BlockBegin::linear_scan_loop_end_flag))) { | |
749 TRACE_LINEAR_SCAN(4, tty->print_cr("DOM: computing dominator of B%d: common dominator of B%d and B%d is B%d", cur->block_id(), parent->block_id(), cur->dominator()->block_id(), common_dominator(cur->dominator(), parent)->block_id())); | |
8860 | 750 // Does not hold for exception blocks |
751 assert(cur->number_of_preds() > 1 || cur->is_set(BlockBegin::exception_entry_flag), ""); | |
0 | 752 cur->set_dominator(common_dominator(cur->dominator(), parent)); |
753 } | |
8860 | 754 |
755 // Additional edge to xhandler of all our successors | |
756 // range check elimination needs that the state at the end of a | |
757 // block be valid in every block it dominates so cur must dominate | |
758 // the exception handlers of its successors. | |
759 int num_cur_xhandler = cur->number_of_exception_handlers(); | |
760 for (int j = 0; j < num_cur_xhandler; j++) { | |
761 BlockBegin* xhandler = cur->exception_handler_at(j); | |
762 compute_dominator(xhandler, parent); | |
763 } | |
0 | 764 } |
765 | |
766 | |
767 int ComputeLinearScanOrder::compute_weight(BlockBegin* cur) { | |
768 BlockBegin* single_sux = NULL; | |
769 if (cur->number_of_sux() == 1) { | |
770 single_sux = cur->sux_at(0); | |
771 } | |
772 | |
773 // limit loop-depth to 15 bit (only for security reason, it will never be so big) | |
774 int weight = (cur->loop_depth() & 0x7FFF) << 16; | |
775 | |
776 // general macro for short definition of weight flags | |
777 // the first instance of INC_WEIGHT_IF has the highest priority | |
778 int cur_bit = 15; | |
779 #define INC_WEIGHT_IF(condition) if ((condition)) { weight |= (1 << cur_bit); } cur_bit--; | |
780 | |
781 // this is necessery for the (very rare) case that two successing blocks have | |
782 // the same loop depth, but a different loop index (can happen for endless loops | |
783 // with exception handlers) | |
784 INC_WEIGHT_IF(!cur->is_set(BlockBegin::linear_scan_loop_header_flag)); | |
785 | |
786 // loop end blocks (blocks that end with a backward branch) are added | |
787 // after all other blocks of the loop. | |
788 INC_WEIGHT_IF(!cur->is_set(BlockBegin::linear_scan_loop_end_flag)); | |
789 | |
790 // critical edge split blocks are prefered because than they have a bigger | |
791 // proability to be completely empty | |
792 INC_WEIGHT_IF(cur->is_set(BlockBegin::critical_edge_split_flag)); | |
793 | |
794 // exceptions should not be thrown in normal control flow, so these blocks | |
795 // are added as late as possible | |
796 INC_WEIGHT_IF(cur->end()->as_Throw() == NULL && (single_sux == NULL || single_sux->end()->as_Throw() == NULL)); | |
797 INC_WEIGHT_IF(cur->end()->as_Return() == NULL && (single_sux == NULL || single_sux->end()->as_Return() == NULL)); | |
798 | |
799 // exceptions handlers are added as late as possible | |
800 INC_WEIGHT_IF(!cur->is_set(BlockBegin::exception_entry_flag)); | |
801 | |
802 // guarantee that weight is > 0 | |
803 weight |= 1; | |
804 | |
805 #undef INC_WEIGHT_IF | |
806 assert(cur_bit >= 0, "too many flags"); | |
807 assert(weight > 0, "weight cannot become negative"); | |
808 | |
809 return weight; | |
810 } | |
811 | |
812 bool ComputeLinearScanOrder::ready_for_processing(BlockBegin* cur) { | |
813 // Discount the edge just traveled. | |
814 // When the number drops to zero, all forward branches were processed | |
815 if (dec_forward_branches(cur) != 0) { | |
816 return false; | |
817 } | |
818 | |
819 assert(_linear_scan_order->index_of(cur) == -1, "block already processed (block can be ready only once)"); | |
820 assert(_work_list.index_of(cur) == -1, "block already in work-list (block can be ready only once)"); | |
821 return true; | |
822 } | |
823 | |
824 void ComputeLinearScanOrder::sort_into_work_list(BlockBegin* cur) { | |
825 assert(_work_list.index_of(cur) == -1, "block already in work list"); | |
826 | |
827 int cur_weight = compute_weight(cur); | |
828 | |
829 // the linear_scan_number is used to cache the weight of a block | |
830 cur->set_linear_scan_number(cur_weight); | |
831 | |
832 #ifndef PRODUCT | |
833 if (StressLinearScan) { | |
834 _work_list.insert_before(0, cur); | |
835 return; | |
836 } | |
837 #endif | |
838 | |
839 _work_list.append(NULL); // provide space for new element | |
840 | |
841 int insert_idx = _work_list.length() - 1; | |
842 while (insert_idx > 0 && _work_list.at(insert_idx - 1)->linear_scan_number() > cur_weight) { | |
843 _work_list.at_put(insert_idx, _work_list.at(insert_idx - 1)); | |
844 insert_idx--; | |
845 } | |
846 _work_list.at_put(insert_idx, cur); | |
847 | |
848 TRACE_LINEAR_SCAN(3, tty->print_cr("Sorted B%d into worklist. new worklist:", cur->block_id())); | |
849 TRACE_LINEAR_SCAN(3, for (int i = 0; i < _work_list.length(); i++) tty->print_cr("%8d B%2d weight:%6x", i, _work_list.at(i)->block_id(), _work_list.at(i)->linear_scan_number())); | |
850 | |
851 #ifdef ASSERT | |
852 for (int i = 0; i < _work_list.length(); i++) { | |
853 assert(_work_list.at(i)->linear_scan_number() > 0, "weight not set"); | |
854 assert(i == 0 || _work_list.at(i - 1)->linear_scan_number() <= _work_list.at(i)->linear_scan_number(), "incorrect order in worklist"); | |
855 } | |
856 #endif | |
857 } | |
858 | |
859 void ComputeLinearScanOrder::append_block(BlockBegin* cur) { | |
860 TRACE_LINEAR_SCAN(3, tty->print_cr("appending block B%d (weight 0x%6x) to linear-scan order", cur->block_id(), cur->linear_scan_number())); | |
861 assert(_linear_scan_order->index_of(cur) == -1, "cannot add the same block twice"); | |
862 | |
863 // currently, the linear scan order and code emit order are equal. | |
864 // therefore the linear_scan_number and the weight of a block must also | |
865 // be equal. | |
866 cur->set_linear_scan_number(_linear_scan_order->length()); | |
867 _linear_scan_order->append(cur); | |
868 } | |
869 | |
870 void ComputeLinearScanOrder::compute_order(BlockBegin* start_block) { | |
10973
ef57c43512d6
8014431: cleanup warnings indicated by the -Wunused-value compiler option on linux
ccheung
parents:
8860
diff
changeset
|
871 TRACE_LINEAR_SCAN(3, tty->print_cr("----- computing final block order")); |
0 | 872 |
873 // the start block is always the first block in the linear scan order | |
874 _linear_scan_order = new BlockList(_num_blocks); | |
875 append_block(start_block); | |
876 | |
877 assert(start_block->end()->as_Base() != NULL, "start block must end with Base-instruction"); | |
878 BlockBegin* std_entry = ((Base*)start_block->end())->std_entry(); | |
879 BlockBegin* osr_entry = ((Base*)start_block->end())->osr_entry(); | |
880 | |
881 BlockBegin* sux_of_osr_entry = NULL; | |
882 if (osr_entry != NULL) { | |
883 // special handling for osr entry: | |
884 // ignore the edge between the osr entry and its successor for processing | |
885 // the osr entry block is added manually below | |
886 assert(osr_entry->number_of_sux() == 1, "osr entry must have exactly one successor"); | |
887 assert(osr_entry->sux_at(0)->number_of_preds() >= 2, "sucessor of osr entry must have two predecessors (otherwise it is not present in normal control flow"); | |
888 | |
889 sux_of_osr_entry = osr_entry->sux_at(0); | |
890 dec_forward_branches(sux_of_osr_entry); | |
891 | |
892 compute_dominator(osr_entry, start_block); | |
893 _iterative_dominators = true; | |
894 } | |
895 compute_dominator(std_entry, start_block); | |
896 | |
897 // start processing with standard entry block | |
898 assert(_work_list.is_empty(), "list must be empty before processing"); | |
899 | |
900 if (ready_for_processing(std_entry)) { | |
901 sort_into_work_list(std_entry); | |
902 } else { | |
903 assert(false, "the std_entry must be ready for processing (otherwise, the method has no start block)"); | |
904 } | |
905 | |
906 do { | |
907 BlockBegin* cur = _work_list.pop(); | |
908 | |
909 if (cur == sux_of_osr_entry) { | |
910 // the osr entry block is ignored in normal processing, it is never added to the | |
911 // work list. Instead, it is added as late as possible manually here. | |
912 append_block(osr_entry); | |
913 compute_dominator(cur, osr_entry); | |
914 } | |
915 append_block(cur); | |
916 | |
917 int i; | |
918 int num_sux = cur->number_of_sux(); | |
919 // changed loop order to get "intuitive" order of if- and else-blocks | |
920 for (i = 0; i < num_sux; i++) { | |
921 BlockBegin* sux = cur->sux_at(i); | |
922 compute_dominator(sux, cur); | |
923 if (ready_for_processing(sux)) { | |
924 sort_into_work_list(sux); | |
925 } | |
926 } | |
927 num_sux = cur->number_of_exception_handlers(); | |
928 for (i = 0; i < num_sux; i++) { | |
929 BlockBegin* sux = cur->exception_handler_at(i); | |
930 if (ready_for_processing(sux)) { | |
931 sort_into_work_list(sux); | |
932 } | |
933 } | |
934 } while (_work_list.length() > 0); | |
935 } | |
936 | |
937 | |
938 bool ComputeLinearScanOrder::compute_dominators_iter() { | |
939 bool changed = false; | |
940 int num_blocks = _linear_scan_order->length(); | |
941 | |
942 assert(_linear_scan_order->at(0)->dominator() == NULL, "must not have dominator"); | |
943 assert(_linear_scan_order->at(0)->number_of_preds() == 0, "must not have predecessors"); | |
944 for (int i = 1; i < num_blocks; i++) { | |
945 BlockBegin* block = _linear_scan_order->at(i); | |
946 | |
947 BlockBegin* dominator = block->pred_at(0); | |
948 int num_preds = block->number_of_preds(); | |
8860 | 949 |
950 TRACE_LINEAR_SCAN(4, tty->print_cr("DOM: Processing B%d", block->block_id())); | |
951 | |
952 for (int j = 0; j < num_preds; j++) { | |
953 | |
954 BlockBegin *pred = block->pred_at(j); | |
955 TRACE_LINEAR_SCAN(4, tty->print_cr(" DOM: Subrocessing B%d", pred->block_id())); | |
956 | |
957 if (block->is_set(BlockBegin::exception_entry_flag)) { | |
958 dominator = common_dominator(dominator, pred); | |
959 int num_pred_preds = pred->number_of_preds(); | |
960 for (int k = 0; k < num_pred_preds; k++) { | |
961 dominator = common_dominator(dominator, pred->pred_at(k)); | |
962 } | |
963 } else { | |
964 dominator = common_dominator(dominator, pred); | |
965 } | |
0 | 966 } |
967 | |
968 if (dominator != block->dominator()) { | |
969 TRACE_LINEAR_SCAN(4, tty->print_cr("DOM: updating dominator of B%d from B%d to B%d", block->block_id(), block->dominator()->block_id(), dominator->block_id())); | |
970 | |
971 block->set_dominator(dominator); | |
972 changed = true; | |
973 } | |
974 } | |
975 return changed; | |
976 } | |
977 | |
978 void ComputeLinearScanOrder::compute_dominators() { | |
979 TRACE_LINEAR_SCAN(3, tty->print_cr("----- computing dominators (iterative computation reqired: %d)", _iterative_dominators)); | |
980 | |
981 // iterative computation of dominators is only required for methods with non-natural loops | |
982 // and OSR-methods. For all other methods, the dominators computed when generating the | |
983 // linear scan block order are correct. | |
984 if (_iterative_dominators) { | |
985 do { | |
986 TRACE_LINEAR_SCAN(1, tty->print_cr("DOM: next iteration of fix-point calculation")); | |
987 } while (compute_dominators_iter()); | |
988 } | |
989 | |
990 // check that dominators are correct | |
991 assert(!compute_dominators_iter(), "fix point not reached"); | |
8860 | 992 |
993 // Add Blocks to dominates-Array | |
994 int num_blocks = _linear_scan_order->length(); | |
995 for (int i = 0; i < num_blocks; i++) { | |
996 BlockBegin* block = _linear_scan_order->at(i); | |
997 | |
998 BlockBegin *dom = block->dominator(); | |
999 if (dom) { | |
1000 assert(dom->dominator_depth() != -1, "Dominator must have been visited before"); | |
1001 dom->dominates()->append(block); | |
1002 block->set_dominator_depth(dom->dominator_depth() + 1); | |
1003 } else { | |
1004 block->set_dominator_depth(0); | |
1005 } | |
1006 } | |
0 | 1007 } |
1008 | |
1009 | |
1010 #ifndef PRODUCT | |
1011 void ComputeLinearScanOrder::print_blocks() { | |
1012 if (TraceLinearScanLevel >= 2) { | |
1013 tty->print_cr("----- loop information:"); | |
1014 for (int block_idx = 0; block_idx < _linear_scan_order->length(); block_idx++) { | |
1015 BlockBegin* cur = _linear_scan_order->at(block_idx); | |
1016 | |
1017 tty->print("%4d: B%2d: ", cur->linear_scan_number(), cur->block_id()); | |
1018 for (int loop_idx = 0; loop_idx < _num_loops; loop_idx++) { | |
1019 tty->print ("%d ", is_block_in_loop(loop_idx, cur)); | |
1020 } | |
1021 tty->print_cr(" -> loop_index: %2d, loop_depth: %2d", cur->loop_index(), cur->loop_depth()); | |
1022 } | |
1023 } | |
1024 | |
1025 if (TraceLinearScanLevel >= 1) { | |
1026 tty->print_cr("----- linear-scan block order:"); | |
1027 for (int block_idx = 0; block_idx < _linear_scan_order->length(); block_idx++) { | |
1028 BlockBegin* cur = _linear_scan_order->at(block_idx); | |
1029 tty->print("%4d: B%2d loop: %2d depth: %2d", cur->linear_scan_number(), cur->block_id(), cur->loop_index(), cur->loop_depth()); | |
1030 | |
1031 tty->print(cur->is_set(BlockBegin::exception_entry_flag) ? " ex" : " "); | |
1032 tty->print(cur->is_set(BlockBegin::critical_edge_split_flag) ? " ce" : " "); | |
1033 tty->print(cur->is_set(BlockBegin::linear_scan_loop_header_flag) ? " lh" : " "); | |
1034 tty->print(cur->is_set(BlockBegin::linear_scan_loop_end_flag) ? " le" : " "); | |
1035 | |
1036 if (cur->dominator() != NULL) { | |
1037 tty->print(" dom: B%d ", cur->dominator()->block_id()); | |
1038 } else { | |
1039 tty->print(" dom: NULL "); | |
1040 } | |
1041 | |
1042 if (cur->number_of_preds() > 0) { | |
1043 tty->print(" preds: "); | |
1044 for (int j = 0; j < cur->number_of_preds(); j++) { | |
1045 BlockBegin* pred = cur->pred_at(j); | |
1046 tty->print("B%d ", pred->block_id()); | |
1047 } | |
1048 } | |
1049 if (cur->number_of_sux() > 0) { | |
1050 tty->print(" sux: "); | |
1051 for (int j = 0; j < cur->number_of_sux(); j++) { | |
1052 BlockBegin* sux = cur->sux_at(j); | |
1053 tty->print("B%d ", sux->block_id()); | |
1054 } | |
1055 } | |
1056 if (cur->number_of_exception_handlers() > 0) { | |
1057 tty->print(" ex: "); | |
1058 for (int j = 0; j < cur->number_of_exception_handlers(); j++) { | |
1059 BlockBegin* ex = cur->exception_handler_at(j); | |
1060 tty->print("B%d ", ex->block_id()); | |
1061 } | |
1062 } | |
1063 tty->cr(); | |
1064 } | |
1065 } | |
1066 } | |
1067 #endif | |
1068 | |
1069 #ifdef ASSERT | |
1070 void ComputeLinearScanOrder::verify() { | |
1071 assert(_linear_scan_order->length() == _num_blocks, "wrong number of blocks in list"); | |
1072 | |
1073 if (StressLinearScan) { | |
1074 // blocks are scrambled when StressLinearScan is used | |
1075 return; | |
1076 } | |
1077 | |
1078 // check that all successors of a block have a higher linear-scan-number | |
1079 // and that all predecessors of a block have a lower linear-scan-number | |
1080 // (only backward branches of loops are ignored) | |
1081 int i; | |
1082 for (i = 0; i < _linear_scan_order->length(); i++) { | |
1083 BlockBegin* cur = _linear_scan_order->at(i); | |
1084 | |
1085 assert(cur->linear_scan_number() == i, "incorrect linear_scan_number"); | |
1086 assert(cur->linear_scan_number() >= 0 && cur->linear_scan_number() == _linear_scan_order->index_of(cur), "incorrect linear_scan_number"); | |
1087 | |
1088 int j; | |
1089 for (j = cur->number_of_sux() - 1; j >= 0; j--) { | |
1090 BlockBegin* sux = cur->sux_at(j); | |
1091 | |
1092 assert(sux->linear_scan_number() >= 0 && sux->linear_scan_number() == _linear_scan_order->index_of(sux), "incorrect linear_scan_number"); | |
8860 | 1093 if (!sux->is_set(BlockBegin::backward_branch_target_flag)) { |
0 | 1094 assert(cur->linear_scan_number() < sux->linear_scan_number(), "invalid order"); |
1095 } | |
1096 if (cur->loop_depth() == sux->loop_depth()) { | |
1097 assert(cur->loop_index() == sux->loop_index() || sux->is_set(BlockBegin::linear_scan_loop_header_flag), "successing blocks with same loop depth must have same loop index"); | |
1098 } | |
1099 } | |
1100 | |
1101 for (j = cur->number_of_preds() - 1; j >= 0; j--) { | |
1102 BlockBegin* pred = cur->pred_at(j); | |
1103 | |
1104 assert(pred->linear_scan_number() >= 0 && pred->linear_scan_number() == _linear_scan_order->index_of(pred), "incorrect linear_scan_number"); | |
8860 | 1105 if (!cur->is_set(BlockBegin::backward_branch_target_flag)) { |
0 | 1106 assert(cur->linear_scan_number() > pred->linear_scan_number(), "invalid order"); |
1107 } | |
1108 if (cur->loop_depth() == pred->loop_depth()) { | |
1109 assert(cur->loop_index() == pred->loop_index() || cur->is_set(BlockBegin::linear_scan_loop_header_flag), "successing blocks with same loop depth must have same loop index"); | |
1110 } | |
1111 | |
1112 assert(cur->dominator()->linear_scan_number() <= cur->pred_at(j)->linear_scan_number(), "dominator must be before predecessors"); | |
1113 } | |
1114 | |
1115 // check dominator | |
1116 if (i == 0) { | |
1117 assert(cur->dominator() == NULL, "first block has no dominator"); | |
1118 } else { | |
1119 assert(cur->dominator() != NULL, "all but first block must have dominator"); | |
1120 } | |
8860 | 1121 // Assertion does not hold for exception handlers |
1122 assert(cur->number_of_preds() != 1 || cur->dominator() == cur->pred_at(0) || cur->is_set(BlockBegin::exception_entry_flag), "Single predecessor must also be dominator"); | |
0 | 1123 } |
1124 | |
1125 // check that all loops are continuous | |
1126 for (int loop_idx = 0; loop_idx < _num_loops; loop_idx++) { | |
1127 int block_idx = 0; | |
1128 assert(!is_block_in_loop(loop_idx, _linear_scan_order->at(block_idx)), "the first block must not be present in any loop"); | |
1129 | |
1130 // skip blocks before the loop | |
1131 while (block_idx < _num_blocks && !is_block_in_loop(loop_idx, _linear_scan_order->at(block_idx))) { | |
1132 block_idx++; | |
1133 } | |
1134 // skip blocks of loop | |
1135 while (block_idx < _num_blocks && is_block_in_loop(loop_idx, _linear_scan_order->at(block_idx))) { | |
1136 block_idx++; | |
1137 } | |
1138 // after the first non-loop block, there must not be another loop-block | |
1139 while (block_idx < _num_blocks) { | |
1140 assert(!is_block_in_loop(loop_idx, _linear_scan_order->at(block_idx)), "loop not continuous in linear-scan order"); | |
1141 block_idx++; | |
1142 } | |
1143 } | |
1144 } | |
1145 #endif | |
1146 | |
1147 | |
1148 void IR::compute_code() { | |
1149 assert(is_valid(), "IR must be valid"); | |
1150 | |
1783 | 1151 ComputeLinearScanOrder compute_order(compilation(), start()); |
0 | 1152 _num_loops = compute_order.num_loops(); |
1153 _code = compute_order.linear_scan_order(); | |
1154 } | |
1155 | |
1156 | |
1157 void IR::compute_use_counts() { | |
1158 // make sure all values coming out of this block get evaluated. | |
1159 int num_blocks = _code->length(); | |
1160 for (int i = 0; i < num_blocks; i++) { | |
1161 _code->at(i)->end()->state()->pin_stack_for_linear_scan(); | |
1162 } | |
1163 | |
1164 // compute use counts | |
1165 UseCountComputer::compute(_code); | |
1166 } | |
1167 | |
1168 | |
1169 void IR::iterate_preorder(BlockClosure* closure) { | |
1170 assert(is_valid(), "IR must be valid"); | |
1171 start()->iterate_preorder(closure); | |
1172 } | |
1173 | |
1174 | |
1175 void IR::iterate_postorder(BlockClosure* closure) { | |
1176 assert(is_valid(), "IR must be valid"); | |
1177 start()->iterate_postorder(closure); | |
1178 } | |
1179 | |
1180 void IR::iterate_linear_scan_order(BlockClosure* closure) { | |
1181 linear_scan_order()->iterate_forward(closure); | |
1182 } | |
1183 | |
1184 | |
1185 #ifndef PRODUCT | |
1186 class BlockPrinter: public BlockClosure { | |
1187 private: | |
1188 InstructionPrinter* _ip; | |
1189 bool _cfg_only; | |
1190 bool _live_only; | |
1191 | |
1192 public: | |
1193 BlockPrinter(InstructionPrinter* ip, bool cfg_only, bool live_only = false) { | |
1194 _ip = ip; | |
1195 _cfg_only = cfg_only; | |
1196 _live_only = live_only; | |
1197 } | |
1198 | |
1199 virtual void block_do(BlockBegin* block) { | |
1200 if (_cfg_only) { | |
1201 _ip->print_instr(block); tty->cr(); | |
1202 } else { | |
1203 block->print_block(*_ip, _live_only); | |
1204 } | |
1205 } | |
1206 }; | |
1207 | |
1208 | |
1209 void IR::print(BlockBegin* start, bool cfg_only, bool live_only) { | |
1210 ttyLocker ttyl; | |
1211 InstructionPrinter ip(!cfg_only); | |
1212 BlockPrinter bp(&ip, cfg_only, live_only); | |
1213 start->iterate_preorder(&bp); | |
1214 tty->cr(); | |
1215 } | |
1216 | |
1217 void IR::print(bool cfg_only, bool live_only) { | |
1218 if (is_valid()) { | |
1219 print(start(), cfg_only, live_only); | |
1220 } else { | |
1221 tty->print_cr("invalid IR"); | |
1222 } | |
1223 } | |
1224 | |
1225 | |
1226 define_array(BlockListArray, BlockList*) | |
1227 define_stack(BlockListList, BlockListArray) | |
1228 | |
1229 class PredecessorValidator : public BlockClosure { | |
1230 private: | |
1231 BlockListList* _predecessors; | |
1232 BlockList* _blocks; | |
1233 | |
1234 static int cmp(BlockBegin** a, BlockBegin** b) { | |
1235 return (*a)->block_id() - (*b)->block_id(); | |
1236 } | |
1237 | |
1238 public: | |
1239 PredecessorValidator(IR* hir) { | |
1240 ResourceMark rm; | |
1241 _predecessors = new BlockListList(BlockBegin::number_of_blocks(), NULL); | |
1242 _blocks = new BlockList(); | |
1243 | |
1244 int i; | |
1245 hir->start()->iterate_preorder(this); | |
1246 if (hir->code() != NULL) { | |
1247 assert(hir->code()->length() == _blocks->length(), "must match"); | |
1248 for (i = 0; i < _blocks->length(); i++) { | |
1249 assert(hir->code()->contains(_blocks->at(i)), "should be in both lists"); | |
1250 } | |
1251 } | |
1252 | |
1253 for (i = 0; i < _blocks->length(); i++) { | |
1254 BlockBegin* block = _blocks->at(i); | |
1255 BlockList* preds = _predecessors->at(block->block_id()); | |
1256 if (preds == NULL) { | |
1257 assert(block->number_of_preds() == 0, "should be the same"); | |
1258 continue; | |
1259 } | |
1260 | |
1261 // clone the pred list so we can mutate it | |
1262 BlockList* pred_copy = new BlockList(); | |
1263 int j; | |
1264 for (j = 0; j < block->number_of_preds(); j++) { | |
1265 pred_copy->append(block->pred_at(j)); | |
1266 } | |
1267 // sort them in the same order | |
1268 preds->sort(cmp); | |
1269 pred_copy->sort(cmp); | |
1270 int length = MIN2(preds->length(), block->number_of_preds()); | |
1271 for (j = 0; j < block->number_of_preds(); j++) { | |
1272 assert(preds->at(j) == pred_copy->at(j), "must match"); | |
1273 } | |
1274 | |
1275 assert(preds->length() == block->number_of_preds(), "should be the same"); | |
1276 } | |
1277 } | |
1278 | |
1279 virtual void block_do(BlockBegin* block) { | |
1280 _blocks->append(block); | |
1281 BlockEnd* be = block->end(); | |
1282 int n = be->number_of_sux(); | |
1283 int i; | |
1284 for (i = 0; i < n; i++) { | |
1285 BlockBegin* sux = be->sux_at(i); | |
1286 assert(!sux->is_set(BlockBegin::exception_entry_flag), "must not be xhandler"); | |
1287 | |
1288 BlockList* preds = _predecessors->at_grow(sux->block_id(), NULL); | |
1289 if (preds == NULL) { | |
1290 preds = new BlockList(); | |
1291 _predecessors->at_put(sux->block_id(), preds); | |
1292 } | |
1293 preds->append(block); | |
1294 } | |
1295 | |
1296 n = block->number_of_exception_handlers(); | |
1297 for (i = 0; i < n; i++) { | |
1298 BlockBegin* sux = block->exception_handler_at(i); | |
1299 assert(sux->is_set(BlockBegin::exception_entry_flag), "must be xhandler"); | |
1300 | |
1301 BlockList* preds = _predecessors->at_grow(sux->block_id(), NULL); | |
1302 if (preds == NULL) { | |
1303 preds = new BlockList(); | |
1304 _predecessors->at_put(sux->block_id(), preds); | |
1305 } | |
1306 preds->append(block); | |
1307 } | |
1308 } | |
1309 }; | |
1310 | |
8860 | 1311 class VerifyBlockBeginField : public BlockClosure { |
1312 | |
1313 public: | |
1314 | |
1315 virtual void block_do(BlockBegin *block) { | |
1316 for ( Instruction *cur = block; cur != NULL; cur = cur->next()) { | |
1317 assert(cur->block() == block, "Block begin is not correct"); | |
1318 } | |
1319 } | |
1320 }; | |
1321 | |
0 | 1322 void IR::verify() { |
1323 #ifdef ASSERT | |
1324 PredecessorValidator pv(this); | |
8860 | 1325 VerifyBlockBeginField verifier; |
1326 this->iterate_postorder(&verifier); | |
0 | 1327 #endif |
1328 } | |
1329 | |
1330 #endif // PRODUCT | |
1331 | |
1584 | 1332 void SubstitutionResolver::visit(Value* v) { |
0 | 1333 Value v0 = *v; |
1334 if (v0) { | |
1335 Value vs = v0->subst(); | |
1336 if (vs != v0) { | |
1337 *v = v0->subst(); | |
1338 } | |
1339 } | |
1340 } | |
1341 | |
1342 #ifdef ASSERT | |
1584 | 1343 class SubstitutionChecker: public ValueVisitor { |
1344 void visit(Value* v) { | |
1345 Value v0 = *v; | |
1346 if (v0) { | |
1347 Value vs = v0->subst(); | |
1348 assert(vs == v0, "missed substitution"); | |
1349 } | |
0 | 1350 } |
1584 | 1351 }; |
0 | 1352 #endif |
1353 | |
1354 | |
1355 void SubstitutionResolver::block_do(BlockBegin* block) { | |
1356 Instruction* last = NULL; | |
1357 for (Instruction* n = block; n != NULL;) { | |
1584 | 1358 n->values_do(this); |
0 | 1359 // need to remove this instruction from the instruction stream |
1360 if (n->subst() != n) { | |
1361 assert(last != NULL, "must have last"); | |
1819 | 1362 last->set_next(n->next()); |
0 | 1363 } else { |
1364 last = n; | |
1365 } | |
1366 n = last->next(); | |
1367 } | |
1368 | |
1369 #ifdef ASSERT | |
1584 | 1370 SubstitutionChecker check_substitute; |
1371 if (block->state()) block->state()->values_do(&check_substitute); | |
1372 block->block_values_do(&check_substitute); | |
1373 if (block->end() && block->end()->state()) block->end()->state()->values_do(&check_substitute); | |
0 | 1374 #endif |
1375 } |