Mercurial > hg > truffle
comparison src/share/vm/opto/subnode.hpp @ 0:a61af66fc99e jdk7-b24
Initial load
author | duke |
---|---|
date | Sat, 01 Dec 2007 00:00:00 +0000 |
parents | |
children | ba764ed4b6f2 |
comparison
equal
deleted
inserted
replaced
-1:000000000000 | 0:a61af66fc99e |
---|---|
1 /* | |
2 * Copyright 1997-2006 Sun Microsystems, Inc. All Rights Reserved. | |
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. | |
4 * | |
5 * This code is free software; you can redistribute it and/or modify it | |
6 * under the terms of the GNU General Public License version 2 only, as | |
7 * published by the Free Software Foundation. | |
8 * | |
9 * This code is distributed in the hope that it will be useful, but WITHOUT | |
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 * version 2 for more details (a copy is included in the LICENSE file that | |
13 * accompanied this code). | |
14 * | |
15 * You should have received a copy of the GNU General Public License version | |
16 * 2 along with this work; if not, write to the Free Software Foundation, | |
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
18 * | |
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, | |
20 * CA 95054 USA or visit www.sun.com if you need additional information or | |
21 * have any questions. | |
22 * | |
23 */ | |
24 | |
25 // Portions of code courtesy of Clifford Click | |
26 | |
27 //------------------------------SUBNode---------------------------------------- | |
28 // Class SUBTRACTION functionality. This covers all the usual 'subtract' | |
29 // behaviors. Subtract-integer, -float, -double, binary xor, compare-integer, | |
30 // -float, and -double are all inherited from this class. The compare | |
31 // functions behave like subtract functions, except that all negative answers | |
32 // are compressed into -1, and all positive answers compressed to 1. | |
33 class SubNode : public Node { | |
34 public: | |
35 SubNode( Node *in1, Node *in2 ) : Node(0,in1,in2) { | |
36 init_class_id(Class_Sub); | |
37 } | |
38 | |
39 // Handle algebraic identities here. If we have an identity, return the Node | |
40 // we are equivalent to. We look for "add of zero" as an identity. | |
41 virtual Node *Identity( PhaseTransform *phase ); | |
42 | |
43 // Compute a new Type for this node. Basically we just do the pre-check, | |
44 // then call the virtual add() to set the type. | |
45 virtual const Type *Value( PhaseTransform *phase ) const; | |
46 | |
47 // Supplied function returns the subtractend of the inputs. | |
48 // This also type-checks the inputs for sanity. Guaranteed never to | |
49 // be passed a TOP or BOTTOM type, these are filtered out by a pre-check. | |
50 virtual const Type *sub( const Type *, const Type * ) const = 0; | |
51 | |
52 // Supplied function to return the additive identity type. | |
53 // This is returned whenever the subtracts inputs are the same. | |
54 virtual const Type *add_id() const = 0; | |
55 | |
56 }; | |
57 | |
58 | |
59 // NOTE: SubINode should be taken away and replaced by add and negate | |
60 //------------------------------SubINode--------------------------------------- | |
61 // Subtract 2 integers | |
62 class SubINode : public SubNode { | |
63 public: | |
64 SubINode( Node *in1, Node *in2 ) : SubNode(in1,in2) {} | |
65 virtual int Opcode() const; | |
66 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
67 virtual const Type *sub( const Type *, const Type * ) const; | |
68 const Type *add_id() const { return TypeInt::ZERO; } | |
69 const Type *bottom_type() const { return TypeInt::INT; } | |
70 virtual uint ideal_reg() const { return Op_RegI; } | |
71 }; | |
72 | |
73 //------------------------------SubLNode--------------------------------------- | |
74 // Subtract 2 integers | |
75 class SubLNode : public SubNode { | |
76 public: | |
77 SubLNode( Node *in1, Node *in2 ) : SubNode(in1,in2) {} | |
78 virtual int Opcode() const; | |
79 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
80 virtual const Type *sub( const Type *, const Type * ) const; | |
81 const Type *add_id() const { return TypeLong::ZERO; } | |
82 const Type *bottom_type() const { return TypeLong::LONG; } | |
83 virtual uint ideal_reg() const { return Op_RegL; } | |
84 }; | |
85 | |
86 // NOTE: SubFPNode should be taken away and replaced by add and negate | |
87 //------------------------------SubFPNode-------------------------------------- | |
88 // Subtract 2 floats or doubles | |
89 class SubFPNode : public SubNode { | |
90 protected: | |
91 SubFPNode( Node *in1, Node *in2 ) : SubNode(in1,in2) {} | |
92 public: | |
93 const Type *Value( PhaseTransform *phase ) const; | |
94 }; | |
95 | |
96 // NOTE: SubFNode should be taken away and replaced by add and negate | |
97 //------------------------------SubFNode--------------------------------------- | |
98 // Subtract 2 doubles | |
99 class SubFNode : public SubFPNode { | |
100 public: | |
101 SubFNode( Node *in1, Node *in2 ) : SubFPNode(in1,in2) {} | |
102 virtual int Opcode() const; | |
103 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
104 virtual const Type *sub( const Type *, const Type * ) const; | |
105 const Type *add_id() const { return TypeF::ZERO; } | |
106 const Type *bottom_type() const { return Type::FLOAT; } | |
107 virtual uint ideal_reg() const { return Op_RegF; } | |
108 }; | |
109 | |
110 // NOTE: SubDNode should be taken away and replaced by add and negate | |
111 //------------------------------SubDNode--------------------------------------- | |
112 // Subtract 2 doubles | |
113 class SubDNode : public SubFPNode { | |
114 public: | |
115 SubDNode( Node *in1, Node *in2 ) : SubFPNode(in1,in2) {} | |
116 virtual int Opcode() const; | |
117 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
118 virtual const Type *sub( const Type *, const Type * ) const; | |
119 const Type *add_id() const { return TypeD::ZERO; } | |
120 const Type *bottom_type() const { return Type::DOUBLE; } | |
121 virtual uint ideal_reg() const { return Op_RegD; } | |
122 }; | |
123 | |
124 //------------------------------CmpNode--------------------------------------- | |
125 // Compare 2 values, returning condition codes (-1, 0 or 1). | |
126 class CmpNode : public SubNode { | |
127 public: | |
128 CmpNode( Node *in1, Node *in2 ) : SubNode(in1,in2) { | |
129 init_class_id(Class_Cmp); | |
130 } | |
131 virtual Node *Identity( PhaseTransform *phase ); | |
132 const Type *add_id() const { return TypeInt::ZERO; } | |
133 const Type *bottom_type() const { return TypeInt::CC; } | |
134 virtual uint ideal_reg() const { return Op_RegFlags; } | |
135 }; | |
136 | |
137 //------------------------------CmpINode--------------------------------------- | |
138 // Compare 2 signed values, returning condition codes (-1, 0 or 1). | |
139 class CmpINode : public CmpNode { | |
140 public: | |
141 CmpINode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {} | |
142 virtual int Opcode() const; | |
143 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
144 virtual const Type *sub( const Type *, const Type * ) const; | |
145 }; | |
146 | |
147 //------------------------------CmpUNode--------------------------------------- | |
148 // Compare 2 unsigned values (integer or pointer), returning condition codes (-1, 0 or 1). | |
149 class CmpUNode : public CmpNode { | |
150 public: | |
151 CmpUNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {} | |
152 virtual int Opcode() const; | |
153 virtual const Type *sub( const Type *, const Type * ) const; | |
154 }; | |
155 | |
156 //------------------------------CmpPNode--------------------------------------- | |
157 // Compare 2 pointer values, returning condition codes (-1, 0 or 1). | |
158 class CmpPNode : public CmpNode { | |
159 public: | |
160 CmpPNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {} | |
161 virtual int Opcode() const; | |
162 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
163 virtual const Type *sub( const Type *, const Type * ) const; | |
164 }; | |
165 | |
166 //------------------------------CmpLNode--------------------------------------- | |
167 // Compare 2 long values, returning condition codes (-1, 0 or 1). | |
168 class CmpLNode : public CmpNode { | |
169 public: | |
170 CmpLNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {} | |
171 virtual int Opcode() const; | |
172 virtual const Type *sub( const Type *, const Type * ) const; | |
173 }; | |
174 | |
175 //------------------------------CmpL3Node-------------------------------------- | |
176 // Compare 2 long values, returning integer value (-1, 0 or 1). | |
177 class CmpL3Node : public CmpLNode { | |
178 public: | |
179 CmpL3Node( Node *in1, Node *in2 ) : CmpLNode(in1,in2) { | |
180 // Since it is not consumed by Bools, it is not really a Cmp. | |
181 init_class_id(Class_Sub); | |
182 } | |
183 virtual int Opcode() const; | |
184 virtual uint ideal_reg() const { return Op_RegI; } | |
185 }; | |
186 | |
187 //------------------------------CmpFNode--------------------------------------- | |
188 // Compare 2 float values, returning condition codes (-1, 0 or 1). | |
189 // This implements the Java bytecode fcmpl, so unordered returns -1. | |
190 // Operands may not commute. | |
191 class CmpFNode : public CmpNode { | |
192 public: | |
193 CmpFNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {} | |
194 virtual int Opcode() const; | |
195 virtual const Type *sub( const Type *, const Type * ) const { ShouldNotReachHere(); return NULL; } | |
196 const Type *Value( PhaseTransform *phase ) const; | |
197 }; | |
198 | |
199 //------------------------------CmpF3Node-------------------------------------- | |
200 // Compare 2 float values, returning integer value (-1, 0 or 1). | |
201 // This implements the Java bytecode fcmpl, so unordered returns -1. | |
202 // Operands may not commute. | |
203 class CmpF3Node : public CmpFNode { | |
204 public: | |
205 CmpF3Node( Node *in1, Node *in2 ) : CmpFNode(in1,in2) { | |
206 // Since it is not consumed by Bools, it is not really a Cmp. | |
207 init_class_id(Class_Sub); | |
208 } | |
209 virtual int Opcode() const; | |
210 // Since it is not consumed by Bools, it is not really a Cmp. | |
211 virtual uint ideal_reg() const { return Op_RegI; } | |
212 }; | |
213 | |
214 | |
215 //------------------------------CmpDNode--------------------------------------- | |
216 // Compare 2 double values, returning condition codes (-1, 0 or 1). | |
217 // This implements the Java bytecode dcmpl, so unordered returns -1. | |
218 // Operands may not commute. | |
219 class CmpDNode : public CmpNode { | |
220 public: | |
221 CmpDNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {} | |
222 virtual int Opcode() const; | |
223 virtual const Type *sub( const Type *, const Type * ) const { ShouldNotReachHere(); return NULL; } | |
224 const Type *Value( PhaseTransform *phase ) const; | |
225 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
226 }; | |
227 | |
228 //------------------------------CmpD3Node-------------------------------------- | |
229 // Compare 2 double values, returning integer value (-1, 0 or 1). | |
230 // This implements the Java bytecode dcmpl, so unordered returns -1. | |
231 // Operands may not commute. | |
232 class CmpD3Node : public CmpDNode { | |
233 public: | |
234 CmpD3Node( Node *in1, Node *in2 ) : CmpDNode(in1,in2) { | |
235 // Since it is not consumed by Bools, it is not really a Cmp. | |
236 init_class_id(Class_Sub); | |
237 } | |
238 virtual int Opcode() const; | |
239 virtual uint ideal_reg() const { return Op_RegI; } | |
240 }; | |
241 | |
242 | |
243 //------------------------------BoolTest--------------------------------------- | |
244 // Convert condition codes to a boolean test value (0 or -1). | |
245 // We pick the values as 3 bits; the low order 2 bits we compare against the | |
246 // condition codes, the high bit flips the sense of the result. | |
247 struct BoolTest VALUE_OBJ_CLASS_SPEC { | |
248 enum mask { eq = 0, ne = 4, le = 5, ge = 7, lt = 3, gt = 1, illegal = 8 }; | |
249 mask _test; | |
250 BoolTest( mask btm ) : _test(btm) {} | |
251 const Type *cc2logical( const Type *CC ) const; | |
252 // Commute the test. I use a small table lookup. The table is created as | |
253 // a simple char array where each element is the ASCII version of a 'mask' | |
254 // enum from above. | |
255 mask commute( ) const { return mask("038147858"[_test]-'0'); } | |
256 mask negate( ) const { return mask(_test^4); } | |
257 bool is_canonical( ) const { return (_test == BoolTest::ne || _test == BoolTest::lt || _test == BoolTest::le); } | |
258 #ifndef PRODUCT | |
259 void dump_on(outputStream *st) const; | |
260 #endif | |
261 }; | |
262 | |
263 //------------------------------BoolNode--------------------------------------- | |
264 // A Node to convert a Condition Codes to a Logical result. | |
265 class BoolNode : public Node { | |
266 virtual uint hash() const; | |
267 virtual uint cmp( const Node &n ) const; | |
268 virtual uint size_of() const; | |
269 public: | |
270 const BoolTest _test; | |
271 BoolNode( Node *cc, BoolTest::mask t): _test(t), Node(0,cc) { | |
272 init_class_id(Class_Bool); | |
273 } | |
274 // Convert an arbitrary int value to a Bool or other suitable predicate. | |
275 static Node* make_predicate(Node* test_value, PhaseGVN* phase); | |
276 // Convert self back to an integer value. | |
277 Node* as_int_value(PhaseGVN* phase); | |
278 // Invert sense of self, returning new Bool. | |
279 BoolNode* negate(PhaseGVN* phase); | |
280 virtual int Opcode() const; | |
281 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
282 virtual const Type *Value( PhaseTransform *phase ) const; | |
283 virtual const Type *bottom_type() const { return TypeInt::BOOL; } | |
284 uint match_edge(uint idx) const { return 0; } | |
285 virtual uint ideal_reg() const { return Op_RegI; } | |
286 | |
287 bool is_counted_loop_exit_test(); | |
288 #ifndef PRODUCT | |
289 virtual void dump_spec(outputStream *st) const; | |
290 #endif | |
291 }; | |
292 | |
293 //------------------------------AbsNode---------------------------------------- | |
294 // Abstract class for absolute value. Mostly used to get a handy wrapper | |
295 // for finding this pattern in the graph. | |
296 class AbsNode : public Node { | |
297 public: | |
298 AbsNode( Node *value ) : Node(0,value) {} | |
299 }; | |
300 | |
301 //------------------------------AbsINode--------------------------------------- | |
302 // Absolute value an integer. Since a naive graph involves control flow, we | |
303 // "match" it in the ideal world (so the control flow can be removed). | |
304 class AbsINode : public AbsNode { | |
305 public: | |
306 AbsINode( Node *in1 ) : AbsNode(in1) {} | |
307 virtual int Opcode() const; | |
308 const Type *bottom_type() const { return TypeInt::INT; } | |
309 virtual uint ideal_reg() const { return Op_RegI; } | |
310 }; | |
311 | |
312 //------------------------------AbsFNode--------------------------------------- | |
313 // Absolute value a float, a common float-point idiom with a cheap hardware | |
314 // implemention on most chips. Since a naive graph involves control flow, we | |
315 // "match" it in the ideal world (so the control flow can be removed). | |
316 class AbsFNode : public AbsNode { | |
317 public: | |
318 AbsFNode( Node *in1 ) : AbsNode(in1) {} | |
319 virtual int Opcode() const; | |
320 const Type *bottom_type() const { return Type::FLOAT; } | |
321 virtual uint ideal_reg() const { return Op_RegF; } | |
322 }; | |
323 | |
324 //------------------------------AbsDNode--------------------------------------- | |
325 // Absolute value a double, a common float-point idiom with a cheap hardware | |
326 // implemention on most chips. Since a naive graph involves control flow, we | |
327 // "match" it in the ideal world (so the control flow can be removed). | |
328 class AbsDNode : public AbsNode { | |
329 public: | |
330 AbsDNode( Node *in1 ) : AbsNode(in1) {} | |
331 virtual int Opcode() const; | |
332 const Type *bottom_type() const { return Type::DOUBLE; } | |
333 virtual uint ideal_reg() const { return Op_RegD; } | |
334 }; | |
335 | |
336 | |
337 //------------------------------CmpLTMaskNode---------------------------------- | |
338 // If p < q, return -1 else return 0. Nice for flow-free idioms. | |
339 class CmpLTMaskNode : public Node { | |
340 public: | |
341 CmpLTMaskNode( Node *p, Node *q ) : Node(0, p, q) {} | |
342 virtual int Opcode() const; | |
343 const Type *bottom_type() const { return TypeInt::INT; } | |
344 virtual uint ideal_reg() const { return Op_RegI; } | |
345 }; | |
346 | |
347 | |
348 //------------------------------NegNode---------------------------------------- | |
349 class NegNode : public Node { | |
350 public: | |
351 NegNode( Node *in1 ) : Node(0,in1) {} | |
352 }; | |
353 | |
354 //------------------------------NegFNode--------------------------------------- | |
355 // Negate value a float. Negating 0.0 returns -0.0, but subtracting from | |
356 // zero returns +0.0 (per JVM spec on 'fneg' bytecode). As subtraction | |
357 // cannot be used to replace negation we have to implement negation as ideal | |
358 // node; note that negation and addition can replace subtraction. | |
359 class NegFNode : public NegNode { | |
360 public: | |
361 NegFNode( Node *in1 ) : NegNode(in1) {} | |
362 virtual int Opcode() const; | |
363 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
364 const Type *bottom_type() const { return Type::FLOAT; } | |
365 virtual uint ideal_reg() const { return Op_RegF; } | |
366 }; | |
367 | |
368 //------------------------------NegDNode--------------------------------------- | |
369 // Negate value a double. Negating 0.0 returns -0.0, but subtracting from | |
370 // zero returns +0.0 (per JVM spec on 'dneg' bytecode). As subtraction | |
371 // cannot be used to replace negation we have to implement negation as ideal | |
372 // node; note that negation and addition can replace subtraction. | |
373 class NegDNode : public NegNode { | |
374 public: | |
375 NegDNode( Node *in1 ) : NegNode(in1) {} | |
376 virtual int Opcode() const; | |
377 virtual Node *Ideal(PhaseGVN *phase, bool can_reshape); | |
378 const Type *bottom_type() const { return Type::DOUBLE; } | |
379 virtual uint ideal_reg() const { return Op_RegD; } | |
380 }; | |
381 | |
382 //------------------------------CosDNode--------------------------------------- | |
383 // Cosinus of a double | |
384 class CosDNode : public Node { | |
385 public: | |
386 CosDNode( Node *in1 ) : Node(0, in1) {} | |
387 virtual int Opcode() const; | |
388 const Type *bottom_type() const { return Type::DOUBLE; } | |
389 virtual uint ideal_reg() const { return Op_RegD; } | |
390 virtual const Type *Value( PhaseTransform *phase ) const; | |
391 }; | |
392 | |
393 //------------------------------CosDNode--------------------------------------- | |
394 // Sinus of a double | |
395 class SinDNode : public Node { | |
396 public: | |
397 SinDNode( Node *in1 ) : Node(0, in1) {} | |
398 virtual int Opcode() const; | |
399 const Type *bottom_type() const { return Type::DOUBLE; } | |
400 virtual uint ideal_reg() const { return Op_RegD; } | |
401 virtual const Type *Value( PhaseTransform *phase ) const; | |
402 }; | |
403 | |
404 | |
405 //------------------------------TanDNode--------------------------------------- | |
406 // tangens of a double | |
407 class TanDNode : public Node { | |
408 public: | |
409 TanDNode(Node *in1 ) : Node(0, in1) {} | |
410 virtual int Opcode() const; | |
411 const Type *bottom_type() const { return Type::DOUBLE; } | |
412 virtual uint ideal_reg() const { return Op_RegD; } | |
413 virtual const Type *Value( PhaseTransform *phase ) const; | |
414 }; | |
415 | |
416 | |
417 //------------------------------AtanDNode-------------------------------------- | |
418 // arcus tangens of a double | |
419 class AtanDNode : public Node { | |
420 public: | |
421 AtanDNode(Node *c, Node *in1, Node *in2 ) : Node(c, in1, in2) {} | |
422 virtual int Opcode() const; | |
423 const Type *bottom_type() const { return Type::DOUBLE; } | |
424 virtual uint ideal_reg() const { return Op_RegD; } | |
425 }; | |
426 | |
427 | |
428 //------------------------------SqrtDNode-------------------------------------- | |
429 // square root a double | |
430 class SqrtDNode : public Node { | |
431 public: | |
432 SqrtDNode(Node *c, Node *in1 ) : Node(c, in1) {} | |
433 virtual int Opcode() const; | |
434 const Type *bottom_type() const { return Type::DOUBLE; } | |
435 virtual uint ideal_reg() const { return Op_RegD; } | |
436 virtual const Type *Value( PhaseTransform *phase ) const; | |
437 }; | |
438 | |
439 //------------------------------ExpDNode--------------------------------------- | |
440 // Exponentiate a double | |
441 class ExpDNode : public Node { | |
442 public: | |
443 ExpDNode( Node *c, Node *in1 ) : Node(c, in1) {} | |
444 virtual int Opcode() const; | |
445 const Type *bottom_type() const { return Type::DOUBLE; } | |
446 virtual uint ideal_reg() const { return Op_RegD; } | |
447 virtual const Type *Value( PhaseTransform *phase ) const; | |
448 }; | |
449 | |
450 //------------------------------LogDNode--------------------------------------- | |
451 // Log_e of a double | |
452 class LogDNode : public Node { | |
453 public: | |
454 LogDNode( Node *in1 ) : Node(0, in1) {} | |
455 virtual int Opcode() const; | |
456 const Type *bottom_type() const { return Type::DOUBLE; } | |
457 virtual uint ideal_reg() const { return Op_RegD; } | |
458 virtual const Type *Value( PhaseTransform *phase ) const; | |
459 }; | |
460 | |
461 //------------------------------Log10DNode--------------------------------------- | |
462 // Log_10 of a double | |
463 class Log10DNode : public Node { | |
464 public: | |
465 Log10DNode( Node *in1 ) : Node(0, in1) {} | |
466 virtual int Opcode() const; | |
467 const Type *bottom_type() const { return Type::DOUBLE; } | |
468 virtual uint ideal_reg() const { return Op_RegD; } | |
469 virtual const Type *Value( PhaseTransform *phase ) const; | |
470 }; | |
471 | |
472 //------------------------------PowDNode--------------------------------------- | |
473 // Raise a double to a double power | |
474 class PowDNode : public Node { | |
475 public: | |
476 PowDNode(Node *c, Node *in1, Node *in2 ) : Node(c, in1, in2) {} | |
477 virtual int Opcode() const; | |
478 const Type *bottom_type() const { return Type::DOUBLE; } | |
479 virtual uint ideal_reg() const { return Op_RegD; } | |
480 virtual const Type *Value( PhaseTransform *phase ) const; | |
481 }; | |
482 | |
483 //-------------------------------ReverseBytesINode-------------------------------- | |
484 // reverse bytes of an integer | |
485 class ReverseBytesINode : public Node { | |
486 public: | |
487 ReverseBytesINode(Node *c, Node *in1) : Node(c, in1) {} | |
488 virtual int Opcode() const; | |
489 const Type *bottom_type() const { return TypeInt::INT; } | |
490 virtual uint ideal_reg() const { return Op_RegI; } | |
491 }; | |
492 | |
493 //-------------------------------ReverseBytesLNode-------------------------------- | |
494 // reverse bytes of a long | |
495 class ReverseBytesLNode : public Node { | |
496 public: | |
497 ReverseBytesLNode(Node *c, Node *in1) : Node(c, in1) {} | |
498 virtual int Opcode() const; | |
499 const Type *bottom_type() const { return TypeLong::LONG; } | |
500 virtual uint ideal_reg() const { return Op_RegL; } | |
501 }; |