Mercurial > hg > truffle
view src/cpu/x86/vm/interp_masm_x86_32.cpp @ 16524:a08a58d0736b
[SPARC] Emit compareAndSwap for AtomicInteger and AtomicLong, Removing o7 register from usable ones, as this register is always overwritten, when using Call or JumpAndLink instructions in SPARC, even callee does not overwrite explicitly, implicit exception is defined when doing integer division, parameter constraint narrowed to only register on Unary2Op, Fix SPARCTestOp, as it did a compare instead of an and with condition codes
author | Stefan Anzinger <stefan.anzinger@gmail.com> |
---|---|
date | Tue, 15 Jul 2014 19:07:29 -0700 |
parents | ea79ab313e98 |
children | d3f14809b051 |
line wrap: on
line source
/* * Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. * */ #include "precompiled.hpp" #include "interp_masm_x86.hpp" #include "interpreter/interpreter.hpp" #include "interpreter/interpreterRuntime.hpp" #include "oops/arrayOop.hpp" #include "oops/markOop.hpp" #include "oops/methodData.hpp" #include "oops/method.hpp" #include "prims/jvmtiExport.hpp" #include "prims/jvmtiRedefineClassesTrace.hpp" #include "prims/jvmtiThreadState.hpp" #include "runtime/basicLock.hpp" #include "runtime/biasedLocking.hpp" #include "runtime/sharedRuntime.hpp" #include "runtime/thread.inline.hpp" // Implementation of InterpreterMacroAssembler #ifdef CC_INTERP void InterpreterMacroAssembler::get_method(Register reg) { movptr(reg, Address(rbp, -(sizeof(BytecodeInterpreter) + 2 * wordSize))); movptr(reg, Address(reg, byte_offset_of(BytecodeInterpreter, _method))); } #endif // CC_INTERP #ifndef CC_INTERP void InterpreterMacroAssembler::call_VM_leaf_base( address entry_point, int number_of_arguments ) { // interpreter specific // // Note: No need to save/restore bcp & locals (rsi & rdi) pointer // since these are callee saved registers and no blocking/ // GC can happen in leaf calls. // Further Note: DO NOT save/restore bcp/locals. If a caller has // already saved them so that it can use rsi/rdi as temporaries // then a save/restore here will DESTROY the copy the caller // saved! There used to be a save_bcp() that only happened in // the ASSERT path (no restore_bcp). Which caused bizarre failures // when jvm built with ASSERTs. #ifdef ASSERT { Label L; cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); jcc(Assembler::equal, L); stop("InterpreterMacroAssembler::call_VM_leaf_base: last_sp != NULL"); bind(L); } #endif // super call MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); // interpreter specific // Used to ASSERT that rsi/rdi were equal to frame's bcp/locals // but since they may not have been saved (and we don't want to // save them here (see note above) the assert is invalid. } void InterpreterMacroAssembler::call_VM_base( Register oop_result, Register java_thread, Register last_java_sp, address entry_point, int number_of_arguments, bool check_exceptions ) { #ifdef ASSERT { Label L; cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); jcc(Assembler::equal, L); stop("InterpreterMacroAssembler::call_VM_base: last_sp != NULL"); bind(L); } #endif /* ASSERT */ // interpreter specific // // Note: Could avoid restoring locals ptr (callee saved) - however doesn't // really make a difference for these runtime calls, since they are // slow anyway. Btw., bcp must be saved/restored since it may change // due to GC. assert(java_thread == noreg , "not expecting a precomputed java thread"); save_bcp(); // super call MacroAssembler::call_VM_base(oop_result, java_thread, last_java_sp, entry_point, number_of_arguments, check_exceptions); // interpreter specific restore_bcp(); restore_locals(); } void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { if (JvmtiExport::can_pop_frame()) { Label L; // Initiate popframe handling only if it is not already being processed. If the flag // has the popframe_processing bit set, it means that this code is called *during* popframe // handling - we don't want to reenter. Register pop_cond = java_thread; // Not clear if any other register is available... movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset())); testl(pop_cond, JavaThread::popframe_pending_bit); jcc(Assembler::zero, L); testl(pop_cond, JavaThread::popframe_processing_bit); jcc(Assembler::notZero, L); // Call Interpreter::remove_activation_preserving_args_entry() to get the // address of the same-named entrypoint in the generated interpreter code. call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); jmp(rax); bind(L); get_thread(java_thread); } } void InterpreterMacroAssembler::load_earlyret_value(TosState state) { get_thread(rcx); movl(rcx, Address(rcx, JavaThread::jvmti_thread_state_offset())); const Address tos_addr (rcx, JvmtiThreadState::earlyret_tos_offset()); const Address oop_addr (rcx, JvmtiThreadState::earlyret_oop_offset()); const Address val_addr (rcx, JvmtiThreadState::earlyret_value_offset()); const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset() + in_ByteSize(wordSize)); switch (state) { case atos: movptr(rax, oop_addr); movptr(oop_addr, NULL_WORD); verify_oop(rax, state); break; case ltos: movl(rdx, val_addr1); // fall through case btos: // fall through case ctos: // fall through case stos: // fall through case itos: movl(rax, val_addr); break; case ftos: fld_s(val_addr); break; case dtos: fld_d(val_addr); break; case vtos: /* nothing to do */ break; default : ShouldNotReachHere(); } // Clean up tos value in the thread object movl(tos_addr, (int32_t) ilgl); movptr(val_addr, NULL_WORD); NOT_LP64(movptr(val_addr1, NULL_WORD)); } void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { if (JvmtiExport::can_force_early_return()) { Label L; Register tmp = java_thread; movptr(tmp, Address(tmp, JavaThread::jvmti_thread_state_offset())); testptr(tmp, tmp); jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit; // Initiate earlyret handling only if it is not already being processed. // If the flag has the earlyret_processing bit set, it means that this code // is called *during* earlyret handling - we don't want to reenter. movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset())); cmpl(tmp, JvmtiThreadState::earlyret_pending); jcc(Assembler::notEqual, L); // Call Interpreter::remove_activation_early_entry() to get the address of the // same-named entrypoint in the generated interpreter code. get_thread(java_thread); movptr(tmp, Address(java_thread, JavaThread::jvmti_thread_state_offset())); pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset())); call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1); jmp(rax); bind(L); get_thread(java_thread); } } void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) { assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); load_unsigned_short(reg, Address(rsi, bcp_offset)); bswapl(reg); shrl(reg, 16); } void InterpreterMacroAssembler::get_cache_index_at_bcp(Register reg, int bcp_offset, size_t index_size) { assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); if (index_size == sizeof(u2)) { load_unsigned_short(reg, Address(rsi, bcp_offset)); } else if (index_size == sizeof(u4)) { assert(EnableInvokeDynamic, "giant index used only for JSR 292"); movl(reg, Address(rsi, bcp_offset)); // Check if the secondary index definition is still ~x, otherwise // we have to change the following assembler code to calculate the // plain index. assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line"); notl(reg); // convert to plain index } else if (index_size == sizeof(u1)) { load_unsigned_byte(reg, Address(rsi, bcp_offset)); } else { ShouldNotReachHere(); } } void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, Register index, int bcp_offset, size_t index_size) { assert_different_registers(cache, index); get_cache_index_at_bcp(index, bcp_offset, index_size); movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below"); assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line"); shlptr(index, 2); // convert from field index to ConstantPoolCacheEntry index } void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache, Register index, Register bytecode, int byte_no, int bcp_offset, size_t index_size) { get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size); movptr(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset())); const int shift_count = (1 + byte_no) * BitsPerByte; assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) || (byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift), "correct shift count"); shrptr(bytecode, shift_count); assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask"); andptr(bytecode, ConstantPoolCacheEntry::bytecode_1_mask); } void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, Register tmp, int bcp_offset, size_t index_size) { assert(cache != tmp, "must use different register"); get_cache_index_at_bcp(tmp, bcp_offset, index_size); assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below"); // convert from field index to ConstantPoolCacheEntry index // and from word offset to byte offset assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line"); shll(tmp, 2 + LogBytesPerWord); movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); // skip past the header addptr(cache, in_bytes(ConstantPoolCache::base_offset())); addptr(cache, tmp); // construct pointer to cache entry } void InterpreterMacroAssembler::get_method_counters(Register method, Register mcs, Label& skip) { Label has_counters; movptr(mcs, Address(method, Method::method_counters_offset())); testptr(mcs, mcs); jcc(Assembler::notZero, has_counters); call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::build_method_counters), method); movptr(mcs, Address(method,Method::method_counters_offset())); testptr(mcs, mcs); jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory bind(has_counters); } // Load object from cpool->resolved_references(index) void InterpreterMacroAssembler::load_resolved_reference_at_index( Register result, Register index) { assert_different_registers(result, index); // convert from field index to resolved_references() index and from // word index to byte offset. Since this is a java object, it can be compressed Register tmp = index; // reuse shll(tmp, LogBytesPerHeapOop); get_constant_pool(result); // load pointer for resolved_references[] objArray movptr(result, Address(result, ConstantPool::resolved_references_offset_in_bytes())); // JNIHandles::resolve(obj); movptr(result, Address(result, 0)); // Add in the index addptr(result, tmp); load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT))); } // Generate a subtype check: branch to ok_is_subtype if sub_klass is // a subtype of super_klass. EAX holds the super_klass. Blows ECX. // Resets EDI to locals. Register sub_klass cannot be any of the above. void InterpreterMacroAssembler::gen_subtype_check( Register Rsub_klass, Label &ok_is_subtype ) { assert( Rsub_klass != rax, "rax, holds superklass" ); assert( Rsub_klass != rcx, "used as a temp" ); assert( Rsub_klass != rdi, "used as a temp, restored from locals" ); // Profile the not-null value's klass. profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi // Do the check. check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx // Profile the failure of the check. profile_typecheck_failed(rcx); // blows rcx } void InterpreterMacroAssembler::f2ieee() { if (IEEEPrecision) { fstp_s(Address(rsp, 0)); fld_s(Address(rsp, 0)); } } void InterpreterMacroAssembler::d2ieee() { if (IEEEPrecision) { fstp_d(Address(rsp, 0)); fld_d(Address(rsp, 0)); } } // Java Expression Stack void InterpreterMacroAssembler::pop_ptr(Register r) { pop(r); } void InterpreterMacroAssembler::pop_i(Register r) { pop(r); } void InterpreterMacroAssembler::pop_l(Register lo, Register hi) { pop(lo); pop(hi); } void InterpreterMacroAssembler::pop_f() { fld_s(Address(rsp, 0)); addptr(rsp, 1 * wordSize); } void InterpreterMacroAssembler::pop_d() { fld_d(Address(rsp, 0)); addptr(rsp, 2 * wordSize); } void InterpreterMacroAssembler::pop(TosState state) { switch (state) { case atos: pop_ptr(rax); break; case btos: // fall through case ctos: // fall through case stos: // fall through case itos: pop_i(rax); break; case ltos: pop_l(rax, rdx); break; case ftos: pop_f(); break; case dtos: pop_d(); break; case vtos: /* nothing to do */ break; default : ShouldNotReachHere(); } verify_oop(rax, state); } void InterpreterMacroAssembler::push_ptr(Register r) { push(r); } void InterpreterMacroAssembler::push_i(Register r) { push(r); } void InterpreterMacroAssembler::push_l(Register lo, Register hi) { push(hi); push(lo); } void InterpreterMacroAssembler::push_f() { // Do not schedule for no AGI! Never write beyond rsp! subptr(rsp, 1 * wordSize); fstp_s(Address(rsp, 0)); } void InterpreterMacroAssembler::push_d(Register r) { // Do not schedule for no AGI! Never write beyond rsp! subptr(rsp, 2 * wordSize); fstp_d(Address(rsp, 0)); } void InterpreterMacroAssembler::push(TosState state) { verify_oop(rax, state); switch (state) { case atos: push_ptr(rax); break; case btos: // fall through case ctos: // fall through case stos: // fall through case itos: push_i(rax); break; case ltos: push_l(rax, rdx); break; case ftos: push_f(); break; case dtos: push_d(rax); break; case vtos: /* nothing to do */ break; default : ShouldNotReachHere(); } } // Helpers for swap and dup void InterpreterMacroAssembler::load_ptr(int n, Register val) { movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n))); } void InterpreterMacroAssembler::store_ptr(int n, Register val) { movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val); } void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { // set sender sp lea(rsi, Address(rsp, wordSize)); // record last_sp movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), rsi); } // Jump to from_interpreted entry of a call unless single stepping is possible // in this thread in which case we must call the i2i entry void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { prepare_to_jump_from_interpreted(); if (JvmtiExport::can_post_interpreter_events()) { Label run_compiled_code; // JVMTI events, such as single-stepping, are implemented partly by avoiding running // compiled code in threads for which the event is enabled. Check here for // interp_only_mode if these events CAN be enabled. get_thread(temp); // interp_only is an int, on little endian it is sufficient to test the byte only // Is a cmpl faster? cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0); jccb(Assembler::zero, run_compiled_code); jmp(Address(method, Method::interpreter_entry_offset())); bind(run_compiled_code); } jmp(Address(method, Method::from_interpreted_offset())); } // The following two routines provide a hook so that an implementation // can schedule the dispatch in two parts. Intel does not do this. void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { // Nothing Intel-specific to be done here. } void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { dispatch_next(state, step); } void InterpreterMacroAssembler::dispatch_base(TosState state, address* table, bool verifyoop) { verify_FPU(1, state); if (VerifyActivationFrameSize) { Label L; mov(rcx, rbp); subptr(rcx, rsp); int min_frame_size = (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * wordSize; cmpptr(rcx, min_frame_size); jcc(Assembler::greaterEqual, L); stop("broken stack frame"); bind(L); } if (verifyoop) verify_oop(rax, state); Address index(noreg, rbx, Address::times_ptr); ExternalAddress tbl((address)table); ArrayAddress dispatch(tbl, index); jump(dispatch); } void InterpreterMacroAssembler::dispatch_only(TosState state) { dispatch_base(state, Interpreter::dispatch_table(state)); } void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { dispatch_base(state, Interpreter::normal_table(state)); } void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { dispatch_base(state, Interpreter::normal_table(state), false); } void InterpreterMacroAssembler::dispatch_next(TosState state, int step) { // load next bytecode (load before advancing rsi to prevent AGI) load_unsigned_byte(rbx, Address(rsi, step)); // advance rsi increment(rsi, step); dispatch_base(state, Interpreter::dispatch_table(state)); } void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { // load current bytecode load_unsigned_byte(rbx, Address(rsi, 0)); dispatch_base(state, table); } // remove activation // // Unlock the receiver if this is a synchronized method. // Unlock any Java monitors from syncronized blocks. // Remove the activation from the stack. // // If there are locked Java monitors // If throw_monitor_exception // throws IllegalMonitorStateException // Else if install_monitor_exception // installs IllegalMonitorStateException // Else // no error processing void InterpreterMacroAssembler::remove_activation(TosState state, Register ret_addr, bool throw_monitor_exception, bool install_monitor_exception, bool notify_jvmdi) { // Note: Registers rax, rdx and FPU ST(0) may be in use for the result // check if synchronized method Label unlocked, unlock, no_unlock; get_thread(rcx); const Address do_not_unlock_if_synchronized(rcx, in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); movbool(rbx, do_not_unlock_if_synchronized); mov(rdi,rbx); movbool(do_not_unlock_if_synchronized, false); // reset the flag movptr(rbx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); // get method access flags movl(rcx, Address(rbx, Method::access_flags_offset())); testl(rcx, JVM_ACC_SYNCHRONIZED); jcc(Assembler::zero, unlocked); // Don't unlock anything if the _do_not_unlock_if_synchronized flag // is set. mov(rcx,rdi); testbool(rcx); jcc(Assembler::notZero, no_unlock); // unlock monitor push(state); // save result // BasicObjectLock will be first in list, since this is a synchronized method. However, need // to check that the object has not been unlocked by an explicit monitorexit bytecode. const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * wordSize - (int)sizeof(BasicObjectLock)); lea (rdx, monitor); // address of first monitor movptr (rax, Address(rdx, BasicObjectLock::obj_offset_in_bytes())); testptr(rax, rax); jcc (Assembler::notZero, unlock); pop(state); if (throw_monitor_exception) { empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow // Entry already unlocked, need to throw exception call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception)); should_not_reach_here(); } else { // Monitor already unlocked during a stack unroll. // If requested, install an illegal_monitor_state_exception. // Continue with stack unrolling. if (install_monitor_exception) { empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception)); } jmp(unlocked); } bind(unlock); unlock_object(rdx); pop(state); // Check that for block-structured locking (i.e., that all locked objects has been unlocked) bind(unlocked); // rax, rdx: Might contain return value // Check that all monitors are unlocked { Label loop, exception, entry, restart; const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; const Address monitor_block_top(rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize); const Address monitor_block_bot(rbp, frame::interpreter_frame_initial_sp_offset * wordSize); bind(restart); movptr(rcx, monitor_block_top); // points to current entry, starting with top-most entry lea(rbx, monitor_block_bot); // points to word before bottom of monitor block jmp(entry); // Entry already locked, need to throw exception bind(exception); if (throw_monitor_exception) { empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow // Throw exception call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception)); should_not_reach_here(); } else { // Stack unrolling. Unlock object and install illegal_monitor_exception // Unlock does not block, so don't have to worry about the frame push(state); mov(rdx, rcx); unlock_object(rdx); pop(state); if (install_monitor_exception) { empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception)); } jmp(restart); } bind(loop); cmpptr(Address(rcx, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); // check if current entry is used jcc(Assembler::notEqual, exception); addptr(rcx, entry_size); // otherwise advance to next entry bind(entry); cmpptr(rcx, rbx); // check if bottom reached jcc(Assembler::notEqual, loop); // if not at bottom then check this entry } bind(no_unlock); // jvmti support if (notify_jvmdi) { notify_method_exit(state, NotifyJVMTI); // preserve TOSCA } else { notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA } // remove activation movptr(rbx, Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); // get sender sp leave(); // remove frame anchor pop(ret_addr); // get return address mov(rsp, rbx); // set sp to sender sp if (UseSSE) { // float and double are returned in xmm register in SSE-mode if (state == ftos && UseSSE >= 1) { subptr(rsp, wordSize); fstp_s(Address(rsp, 0)); movflt(xmm0, Address(rsp, 0)); addptr(rsp, wordSize); } else if (state == dtos && UseSSE >= 2) { subptr(rsp, 2*wordSize); fstp_d(Address(rsp, 0)); movdbl(xmm0, Address(rsp, 0)); addptr(rsp, 2*wordSize); } } } #endif /* !CC_INTERP */ // Lock object // // Argument: rdx : Points to BasicObjectLock to be used for locking. Must // be initialized with object to lock void InterpreterMacroAssembler::lock_object(Register lock_reg) { assert(lock_reg == rdx, "The argument is only for looks. It must be rdx"); if (UseHeavyMonitors) { call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg); } else { Label done; const Register swap_reg = rax; // Must use rax, for cmpxchg instruction const Register obj_reg = rcx; // Will contain the oop const int obj_offset = BasicObjectLock::obj_offset_in_bytes(); const int lock_offset = BasicObjectLock::lock_offset_in_bytes (); const int mark_offset = lock_offset + BasicLock::displaced_header_offset_in_bytes(); Label slow_case; // Load object pointer into obj_reg %rcx movptr(obj_reg, Address(lock_reg, obj_offset)); if (UseBiasedLocking) { // Note: we use noreg for the temporary register since it's hard // to come up with a free register on all incoming code paths biased_locking_enter(lock_reg, obj_reg, swap_reg, noreg, false, done, &slow_case); } // Load immediate 1 into swap_reg %rax, movptr(swap_reg, (int32_t)1); // Load (object->mark() | 1) into swap_reg %rax, orptr(swap_reg, Address(obj_reg, 0)); // Save (object->mark() | 1) into BasicLock's displaced header movptr(Address(lock_reg, mark_offset), swap_reg); assert(lock_offset == 0, "displached header must be first word in BasicObjectLock"); if (os::is_MP()) { lock(); } cmpxchgptr(lock_reg, Address(obj_reg, 0)); if (PrintBiasedLockingStatistics) { cond_inc32(Assembler::zero, ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); } jcc(Assembler::zero, done); // Test if the oopMark is an obvious stack pointer, i.e., // 1) (mark & 3) == 0, and // 2) rsp <= mark < mark + os::pagesize() // // These 3 tests can be done by evaluating the following // expression: ((mark - rsp) & (3 - os::vm_page_size())), // assuming both stack pointer and pagesize have their // least significant 2 bits clear. // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg subptr(swap_reg, rsp); andptr(swap_reg, 3 - os::vm_page_size()); // Save the test result, for recursive case, the result is zero movptr(Address(lock_reg, mark_offset), swap_reg); if (PrintBiasedLockingStatistics) { cond_inc32(Assembler::zero, ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); } jcc(Assembler::zero, done); bind(slow_case); // Call the runtime routine for slow case call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg); bind(done); } } // Unlocks an object. Used in monitorexit bytecode and remove_activation. // // Argument: rdx : Points to BasicObjectLock structure for lock // Throw an IllegalMonitorException if object is not locked by current thread // // Uses: rax, rbx, rcx, rdx void InterpreterMacroAssembler::unlock_object(Register lock_reg) { assert(lock_reg == rdx, "The argument is only for looks. It must be rdx"); if (UseHeavyMonitors) { call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg); } else { Label done; const Register swap_reg = rax; // Must use rax, for cmpxchg instruction const Register header_reg = rbx; // Will contain the old oopMark const Register obj_reg = rcx; // Will contain the oop save_bcp(); // Save in case of exception // Convert from BasicObjectLock structure to object and BasicLock structure // Store the BasicLock address into %rax, lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes())); // Load oop into obj_reg(%rcx) movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes ())); // Free entry movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), NULL_WORD); if (UseBiasedLocking) { biased_locking_exit(obj_reg, header_reg, done); } // Load the old header from BasicLock structure movptr(header_reg, Address(swap_reg, BasicLock::displaced_header_offset_in_bytes())); // Test for recursion testptr(header_reg, header_reg); // zero for recursive case jcc(Assembler::zero, done); // Atomic swap back the old header if (os::is_MP()) lock(); cmpxchgptr(header_reg, Address(obj_reg, 0)); // zero for recursive case jcc(Assembler::zero, done); // Call the runtime routine for slow case. movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), obj_reg); // restore obj call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg); bind(done); restore_bcp(); } } #ifndef CC_INTERP // Test ImethodDataPtr. If it is null, continue at the specified label void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, Label& zero_continue) { assert(ProfileInterpreter, "must be profiling interpreter"); movptr(mdp, Address(rbp, frame::interpreter_frame_mdx_offset * wordSize)); testptr(mdp, mdp); jcc(Assembler::zero, zero_continue); } // Set the method data pointer for the current bcp. void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { assert(ProfileInterpreter, "must be profiling interpreter"); Label set_mdp; push(rax); push(rbx); get_method(rbx); // Test MDO to avoid the call if it is NULL. movptr(rax, Address(rbx, in_bytes(Method::method_data_offset()))); testptr(rax, rax); jcc(Assembler::zero, set_mdp); // rbx,: method // rsi: bcp call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, rsi); // rax,: mdi // mdo is guaranteed to be non-zero here, we checked for it before the call. movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset()))); addptr(rbx, in_bytes(MethodData::data_offset())); addptr(rax, rbx); bind(set_mdp); movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax); pop(rbx); pop(rax); } void InterpreterMacroAssembler::verify_method_data_pointer() { assert(ProfileInterpreter, "must be profiling interpreter"); #ifdef ASSERT Label verify_continue; push(rax); push(rbx); push(rcx); push(rdx); test_method_data_pointer(rcx, verify_continue); // If mdp is zero, continue get_method(rbx); // If the mdp is valid, it will point to a DataLayout header which is // consistent with the bcp. The converse is highly probable also. load_unsigned_short(rdx, Address(rcx, in_bytes(DataLayout::bci_offset()))); addptr(rdx, Address(rbx, Method::const_offset())); lea(rdx, Address(rdx, ConstMethod::codes_offset())); cmpptr(rdx, rsi); jcc(Assembler::equal, verify_continue); // rbx,: method // rsi: bcp // rcx: mdp call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), rbx, rsi, rcx); bind(verify_continue); pop(rdx); pop(rcx); pop(rbx); pop(rax); #endif // ASSERT } void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, int constant, Register value) { // %%% this seems to be used to store counter data which is surely 32bits // however 64bit side stores 64 bits which seems wrong assert(ProfileInterpreter, "must be profiling interpreter"); Address data(mdp_in, constant); movptr(data, value); } void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, int constant, bool decrement) { // Counter address Address data(mdp_in, constant); increment_mdp_data_at(data, decrement); } void InterpreterMacroAssembler::increment_mdp_data_at(Address data, bool decrement) { assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" ); assert(ProfileInterpreter, "must be profiling interpreter"); // %%% 64bit treats this as 64 bit which seems unlikely if (decrement) { // Decrement the register. Set condition codes. addl(data, -DataLayout::counter_increment); // If the decrement causes the counter to overflow, stay negative Label L; jcc(Assembler::negative, L); addl(data, DataLayout::counter_increment); bind(L); } else { assert(DataLayout::counter_increment == 1, "flow-free idiom only works with 1"); // Increment the register. Set carry flag. addl(data, DataLayout::counter_increment); // If the increment causes the counter to overflow, pull back by 1. sbbl(data, 0); } } void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, Register reg, int constant, bool decrement) { Address data(mdp_in, reg, Address::times_1, constant); increment_mdp_data_at(data, decrement); } void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, int flag_byte_constant) { assert(ProfileInterpreter, "must be profiling interpreter"); int header_offset = in_bytes(DataLayout::header_offset()); int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant); // Set the flag orl(Address(mdp_in, header_offset), header_bits); } void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, int offset, Register value, Register test_value_out, Label& not_equal_continue) { assert(ProfileInterpreter, "must be profiling interpreter"); if (test_value_out == noreg) { cmpptr(value, Address(mdp_in, offset)); } else { // Put the test value into a register, so caller can use it: movptr(test_value_out, Address(mdp_in, offset)); cmpptr(test_value_out, value); } jcc(Assembler::notEqual, not_equal_continue); } void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, int offset_of_disp) { assert(ProfileInterpreter, "must be profiling interpreter"); Address disp_address(mdp_in, offset_of_disp); addptr(mdp_in,disp_address); movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); } void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, Register reg, int offset_of_disp) { assert(ProfileInterpreter, "must be profiling interpreter"); Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp); addptr(mdp_in, disp_address); movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); } void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, int constant) { assert(ProfileInterpreter, "must be profiling interpreter"); addptr(mdp_in, constant); movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); } void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { assert(ProfileInterpreter, "must be profiling interpreter"); push(return_bci); // save/restore across call_VM call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), return_bci); pop(return_bci); } void InterpreterMacroAssembler::profile_taken_branch(Register mdp, Register bumped_count) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. // Otherwise, assign to mdp test_method_data_pointer(mdp, profile_continue); // We are taking a branch. Increment the taken count. // We inline increment_mdp_data_at to return bumped_count in a register //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); Address data(mdp, in_bytes(JumpData::taken_offset())); // %%% 64bit treats these cells as 64 bit but they seem to be 32 bit movl(bumped_count,data); assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" ); addl(bumped_count, DataLayout::counter_increment); sbbl(bumped_count, 0); movl(data,bumped_count); // Store back out // The method data pointer needs to be updated to reflect the new target. update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); bind (profile_continue); } } void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); // We are taking a branch. Increment the not taken count. increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); // The method data pointer needs to be updated to correspond to the next bytecode update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); bind (profile_continue); } } void InterpreterMacroAssembler::profile_call(Register mdp) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); // We are making a call. Increment the count. increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); // The method data pointer needs to be updated to reflect the new target. update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); bind (profile_continue); } } void InterpreterMacroAssembler::profile_final_call(Register mdp) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); // We are making a call. Increment the count. increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); // The method data pointer needs to be updated to reflect the new target. update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); bind (profile_continue); } } void InterpreterMacroAssembler::profile_virtual_call(Register receiver, Register mdp, Register reg2, bool receiver_can_be_null) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); Label skip_receiver_profile; if (receiver_can_be_null) { Label not_null; testptr(receiver, receiver); jccb(Assembler::notZero, not_null); // We are making a call. Increment the count for null receiver. increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); jmp(skip_receiver_profile); bind(not_null); } // Record the receiver type. record_klass_in_profile(receiver, mdp, reg2, true); bind(skip_receiver_profile); // The method data pointer needs to be updated to reflect the new target. update_mdp_by_constant(mdp, in_bytes(VirtualCallData:: virtual_call_data_size())); bind(profile_continue); } } void InterpreterMacroAssembler::record_klass_in_profile_helper( Register receiver, Register mdp, Register reg2, int start_row, Label& done, bool is_virtual_call) { if (TypeProfileWidth == 0) { if (is_virtual_call) { increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); } return; } int last_row = VirtualCallData::row_limit() - 1; assert(start_row <= last_row, "must be work left to do"); // Test this row for both the receiver and for null. // Take any of three different outcomes: // 1. found receiver => increment count and goto done // 2. found null => keep looking for case 1, maybe allocate this cell // 3. found something else => keep looking for cases 1 and 2 // Case 3 is handled by a recursive call. for (int row = start_row; row <= last_row; row++) { Label next_test; bool test_for_null_also = (row == start_row); // See if the receiver is receiver[n]. int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row)); test_mdp_data_at(mdp, recvr_offset, receiver, (test_for_null_also ? reg2 : noreg), next_test); // (Reg2 now contains the receiver from the CallData.) // The receiver is receiver[n]. Increment count[n]. int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row)); increment_mdp_data_at(mdp, count_offset); jmp(done); bind(next_test); if (row == start_row) { Label found_null; // Failed the equality check on receiver[n]... Test for null. testptr(reg2, reg2); if (start_row == last_row) { // The only thing left to do is handle the null case. if (is_virtual_call) { jccb(Assembler::zero, found_null); // Receiver did not match any saved receiver and there is no empty row for it. // Increment total counter to indicate polymorphic case. increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); jmp(done); bind(found_null); } else { jcc(Assembler::notZero, done); } break; } // Since null is rare, make it be the branch-taken case. jcc(Assembler::zero, found_null); // Put all the "Case 3" tests here. record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call); // Found a null. Keep searching for a matching receiver, // but remember that this is an empty (unused) slot. bind(found_null); } } // In the fall-through case, we found no matching receiver, but we // observed the receiver[start_row] is NULL. // Fill in the receiver field and increment the count. int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row)); set_mdp_data_at(mdp, recvr_offset, receiver); int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row)); movptr(reg2, (intptr_t)DataLayout::counter_increment); set_mdp_data_at(mdp, count_offset, reg2); if (start_row > 0) { jmp(done); } } void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, Register mdp, Register reg2, bool is_virtual_call) { assert(ProfileInterpreter, "must be profiling"); Label done; record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call); bind (done); } void InterpreterMacroAssembler::profile_ret(Register return_bci, Register mdp) { if (ProfileInterpreter) { Label profile_continue; uint row; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); // Update the total ret count. increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); for (row = 0; row < RetData::row_limit(); row++) { Label next_test; // See if return_bci is equal to bci[n]: test_mdp_data_at(mdp, in_bytes(RetData::bci_offset(row)), return_bci, noreg, next_test); // return_bci is equal to bci[n]. Increment the count. increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); // The method data pointer needs to be updated to reflect the new target. update_mdp_by_offset(mdp, in_bytes(RetData::bci_displacement_offset(row))); jmp(profile_continue); bind(next_test); } update_mdp_for_ret(return_bci); bind (profile_continue); } } void InterpreterMacroAssembler::profile_null_seen(Register mdp) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); // The method data pointer needs to be updated. int mdp_delta = in_bytes(BitData::bit_data_size()); if (TypeProfileCasts) { mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); } update_mdp_by_constant(mdp, mdp_delta); bind (profile_continue); } } void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) { if (ProfileInterpreter && TypeProfileCasts) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); int count_offset = in_bytes(CounterData::count_offset()); // Back up the address, since we have already bumped the mdp. count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); // *Decrement* the counter. We expect to see zero or small negatives. increment_mdp_data_at(mdp, count_offset, true); bind (profile_continue); } } void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); // The method data pointer needs to be updated. int mdp_delta = in_bytes(BitData::bit_data_size()); if (TypeProfileCasts) { mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); // Record the object type. record_klass_in_profile(klass, mdp, reg2, false); assert(reg2 == rdi, "we know how to fix this blown reg"); restore_locals(); // Restore EDI } update_mdp_by_constant(mdp, mdp_delta); bind(profile_continue); } } void InterpreterMacroAssembler::profile_switch_default(Register mdp) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); // Update the default case count increment_mdp_data_at(mdp, in_bytes(MultiBranchData::default_count_offset())); // The method data pointer needs to be updated. update_mdp_by_offset(mdp, in_bytes(MultiBranchData::default_displacement_offset())); bind (profile_continue); } } void InterpreterMacroAssembler::profile_switch_case(Register index, Register mdp, Register reg2) { if (ProfileInterpreter) { Label profile_continue; // If no method data exists, go to profile_continue. test_method_data_pointer(mdp, profile_continue); // Build the base (index * per_case_size_in_bytes()) + case_array_offset_in_bytes() movptr(reg2, (intptr_t)in_bytes(MultiBranchData::per_case_size())); // index is positive and so should have correct value if this code were // used on 64bits imulptr(index, reg2); addptr(index, in_bytes(MultiBranchData::case_array_offset())); // Update the case count increment_mdp_data_at(mdp, index, in_bytes(MultiBranchData::relative_count_offset())); // The method data pointer needs to be updated. update_mdp_by_offset(mdp, index, in_bytes(MultiBranchData::relative_displacement_offset())); bind (profile_continue); } } #endif // !CC_INTERP void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { if (state == atos) MacroAssembler::verify_oop(reg); } #ifndef CC_INTERP void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { if (state == ftos || state == dtos) MacroAssembler::verify_FPU(stack_depth); } #endif /* CC_INTERP */ void InterpreterMacroAssembler::notify_method_entry() { // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to // track stack depth. If it is possible to enter interp_only_mode we add // the code to check if the event should be sent. if (JvmtiExport::can_post_interpreter_events()) { Label L; get_thread(rcx); movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset())); testl(rcx,rcx); jcc(Assembler::zero, L); call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry)); bind(L); } { SkipIfEqual skip_if(this, &DTraceMethodProbes, 0); get_thread(rcx); get_method(rbx); call_VM_leaf( CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), rcx, rbx); } // RedefineClasses() tracing support for obsolete method entry if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) { get_thread(rcx); get_method(rbx); call_VM_leaf( CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), rcx, rbx); } } void InterpreterMacroAssembler::notify_method_exit( TosState state, NotifyMethodExitMode mode) { // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to // track stack depth. If it is possible to enter interp_only_mode we add // the code to check if the event should be sent. if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { Label L; // Note: frame::interpreter_frame_result has a dependency on how the // method result is saved across the call to post_method_exit. If this // is changed then the interpreter_frame_result implementation will // need to be updated too. // For c++ interpreter the result is always stored at a known location in the frame // template interpreter will leave it on the top of the stack. NOT_CC_INTERP(push(state);) get_thread(rcx); movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset())); testl(rcx,rcx); jcc(Assembler::zero, L); call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); bind(L); NOT_CC_INTERP(pop(state);) } { SkipIfEqual skip_if(this, &DTraceMethodProbes, 0); NOT_CC_INTERP(push(state)); get_thread(rbx); get_method(rcx); call_VM_leaf( CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), rbx, rcx); NOT_CC_INTERP(pop(state)); } } // Jump if ((*counter_addr += increment) & mask) satisfies the condition. void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, int increment, int mask, Register scratch, bool preloaded, Condition cond, Label* where) { if (!preloaded) { movl(scratch, counter_addr); } incrementl(scratch, increment); movl(counter_addr, scratch); andl(scratch, mask); jcc(cond, *where); }