Mercurial > hg > truffle
view make/solaris/makefiles/sparcWorks.make @ 199:f139919897d2
6681796: hotspot build failure on gcc 4.2.x (ubuntu 8.04) w/ openjdk 6
Summary: Fixed the cast from char* to const char* and tried to use const char* as much as possible
Reviewed-by: never, kamg
Contributed-by: xiaobin.lu@sun.com
author | xlu |
---|---|
date | Tue, 17 Jun 2008 09:59:59 -0700 |
parents | a49545cab84a |
children | d1605aabd0a1 |
line wrap: on
line source
# # Copyright 1998-2007 Sun Microsystems, Inc. All Rights Reserved. # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. # # This code is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License version 2 only, as # published by the Free Software Foundation. # # This code is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # version 2 for more details (a copy is included in the LICENSE file that # accompanied this code). # # You should have received a copy of the GNU General Public License version # 2 along with this work; if not, write to the Free Software Foundation, # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. # # Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, # CA 95054 USA or visit www.sun.com if you need additional information or # have any questions. # # # Compiler-specific flags for sparcworks. # tell make which C and C++ compilers to use CC = cc CPP = CC # Note that this 'as' is an older version of the Sun Studio 'fbe', and will # use the older style options. The 'fbe' options will match 'cc' and 'CC'. AS = /usr/ccs/bin/as NM = /usr/ccs/bin/nm NAWK = /bin/nawk REORDER_FLAG = -xF # Check for the versions of C++ and C compilers ($CPP and $CC) used. # Get the last thing on the line that looks like x.x+ (x is a digit). COMPILER_REV := \ $(shell $(CPP) -V 2>&1 | sed -e 's/^.*\([1-9]\.[0-9][0-9]*\).*/\1/') C_COMPILER_REV := \ $(shell $(CC) -V 2>&1 | grep -i "cc:" | sed -e 's/^.*\([1-9]\.[0-9][0-9]*\).*/\1/') # Pick which compiler is validated ifeq ($(JDK_MINOR_VERSION),6) # Validated compiler for JDK6 is SS11 (5.8) VALIDATED_COMPILER_REV := 5.8 VALIDATED_C_COMPILER_REV := 5.8 else # FIXUP: Change to SS12 (5.9) once it has been validated. # Validated compiler for JDK7 is SS12 (5.9) #VALIDATED_COMPILER_REV := 5.9 #VALIDATED_C_COMPILER_REV := 5.9 VALIDATED_COMPILER_REV := 5.8 VALIDATED_C_COMPILER_REV := 5.8 endif # Warning messages about not using the above validated version ENFORCE_COMPILER_REV${ENFORCE_COMPILER_REV} := ${VALIDATED_COMPILER_REV} ifneq (${COMPILER_REV},${ENFORCE_COMPILER_REV}) dummy_target_to_enforce_compiler_rev:=\ $(info WARNING: You are using CC version ${COMPILER_REV} \ and should be using version ${ENFORCE_COMPILER_REV}) endif ENFORCE_C_COMPILER_REV${ENFORCE_C_COMPILER_REV} := ${VALIDATED_C_COMPILER_REV} ifneq (${C_COMPILER_REV},${ENFORCE_C_COMPILER_REV}) dummy_target_to_enforce_c_compiler_rev:=\ $(info WARNING: You are using cc version ${C_COMPILER_REV} \ and should be using version ${ENFORCE_C_COMPILER_REV}) endif # Fail the build if __fabsf is used. __fabsf exists only in Solaris 8 2/04 # and newer; objects with a dependency on this symbol will not run on older # Solaris 8. JVM_FAIL_IF_UNDEFINED = __fabsf JVM_CHECK_SYMBOLS = $(NM) -u -p $(LIBJVM.o) | \ $(NAWK) -v f="${JVM_FAIL_IF_UNDEFINED}" \ 'BEGIN { c=split(f,s); rc=0; } \ /:$$/ { file = $$1; } \ /[^:]$$/ { for(n=1;n<=c;++n) { \ if($$1==s[n]) { \ printf("JVM_CHECK_SYMBOLS: %s contains illegal symbol %s\n", \ file,$$1); \ rc=1; \ } \ } \ } \ END { exit rc; }' LINK_LIB.CC/PRE_HOOK += $(JVM_CHECK_SYMBOLS) || exit 1; # Some interfaces (_lwp_create) changed with LP64 and Solaris 7 SOLARIS_7_OR_LATER := \ $(shell uname -r | awk -F. '{ if ($$2 >= 7) print "-DSOLARIS_7_OR_LATER"; }') CFLAGS += ${SOLARIS_7_OR_LATER} # New architecture options started in SS12 (5.9), we need both styles to build. # The older arch options for SS11 (5.8) or older and also for /usr/ccs/bin/as. # Note: SS12 default for 32bit sparc is now the same as v8plus, so the # settings below have changed all SS12 32bit sparc builds to be v8plus. # The older SS11 (5.8) settings have remained as they always have been. ifeq ($(TYPE),COMPILER2) ARCHFLAG_OLD/sparc = -xarch=v8plus else ifeq ($(TYPE),TIERED) ARCHFLAG_OLD/sparc = -xarch=v8plus else ARCHFLAG_OLD/sparc = -xarch=v8 endif endif ARCHFLAG_NEW/sparc = -m32 -xarch=sparc ARCHFLAG_OLD/sparcv9 = -xarch=v9 ARCHFLAG_NEW/sparcv9 = -m64 -xarch=sparc ARCHFLAG_OLD/i486 = ARCHFLAG_NEW/i486 = -m32 ARCHFLAG_OLD/amd64 = -xarch=amd64 ARCHFLAG_NEW/amd64 = -m64 # Select the ARCHFLAGs and other SS12 (5.9) options ifeq ($(shell expr $(COMPILER_REV) \>= 5.9), 1) ARCHFLAG/sparc = $(ARCHFLAG_NEW/sparc) ARCHFLAG/sparcv9 = $(ARCHFLAG_NEW/sparcv9) ARCHFLAG/i486 = $(ARCHFLAG_NEW/i486) ARCHFLAG/amd64 = $(ARCHFLAG_NEW/amd64) else ARCHFLAG/sparc = $(ARCHFLAG_OLD/sparc) ARCHFLAG/sparcv9 = $(ARCHFLAG_OLD/sparcv9) ARCHFLAG/i486 = $(ARCHFLAG_OLD/i486) ARCHFLAG/amd64 = $(ARCHFLAG_OLD/amd64) endif # ARCHFLAGS for the current build arch ARCHFLAG = $(ARCHFLAG/$(BUILDARCH)) AS_ARCHFLAG = $(ARCHFLAG_OLD/$(BUILDARCH)) # Optional sub-directory in /usr/lib where BUILDARCH libraries are kept. ISA_DIR=$(ISA_DIR/$(BUILDARCH)) ISA_DIR/sparcv9=/sparcv9 ISA_DIR/amd64=/amd64 # Use these to work around compiler bugs: OPT_CFLAGS/SLOWER=-xO3 OPT_CFLAGS/O2=-xO2 OPT_CFLAGS/NOOPT=-xO1 ################################################# # Begin current (>=5.6) Forte compiler options # ################################################# ifeq ($(shell expr $(COMPILER_REV) \>= 5.6), 1) ifeq ("${Platform_arch}", "sparc") # We MUST allow data alignment of 4 for sparc (sparcv9 is ok at 8s) ifndef LP64 CFLAGS += -xmemalign=4s endif endif endif ################################################# # Begin current (>=5.5) Forte compiler options # ################################################# ifeq ($(shell expr $(COMPILER_REV) \>= 5.5), 1) CFLAGS += $(ARCHFLAG) AOUT_FLAGS += $(ARCHFLAG) LIB_FLAGS += $(ARCHFLAG) LFLAGS += $(ARCHFLAG) ifeq ("${Platform_arch}", "sparc") # Flags for Optimization # [phh] Commented out pending verification that we do indeed want # to potentially bias against u1 and u3 targets. #CFLAGS += -xchip=ultra2 OPT_CFLAGS=-xO4 $(EXTRA_OPT_CFLAGS) endif # sparc ifeq ("${Platform_arch_model}", "x86_32") OPT_CFLAGS=-xtarget=pentium $(EXTRA_OPT_CFLAGS) # UBE (CC 5.5) has bug 4923569 with -xO4 OPT_CFLAGS+=-xO3 endif # 32bit x86 ifeq ("${Platform_arch_model}", "x86_64") ASFLAGS += $(AS_ARCHFLAG) CFLAGS += $(ARCHFLAG/amd64) # this one seemed useless LFLAGS_VM += $(ARCHFLAG/amd64) # this one worked LFLAGS += $(ARCHFLAG/amd64) AOUT_FLAGS += $(ARCHFLAG/amd64) # -xO3 is faster than -xO4 on specjbb with SS10 compiler OPT_CFLAGS=-xO4 $(EXTRA_OPT_CFLAGS) endif # 64bit x86 # Inline functions CFLAGS += $(GAMMADIR)/src/os_cpu/solaris_${Platform_arch}/vm/solaris_${Platform_arch_model}.il # no more exceptions CFLAGS/NOEX=-features=no%except # avoid compilation problems arising from fact that C++ compiler tries # to search for external template definition by just compiling additional # source files in th same context CFLAGS += -template=no%extdef # Reduce code bloat by reverting back to 5.0 behavior for static initializers CFLAGS += -features=no%split_init # Use -D_Crun_inline_placement so we don't get references to # __1c2n6FIpv_0_ or void*operator new(unsigned,void*) # This avoids the hard requirement of the newer Solaris C++ runtime patches. # NOTE: This is an undocumented feature of the SS10 compiler. See 6306698. CFLAGS += -D_Crun_inline_placement # PIC is safer for SPARC, and is considerably slower # a file foo.o which wants to compile -pic can set "PICFLAG/foo.o = -PIC" PICFLAG = -KPIC PICFLAG/DEFAULT = $(PICFLAG) # [RGV] Need to figure which files to remove to get link to work #PICFLAG/BETTER = -pic PICFLAG/BETTER = $(PICFLAG/DEFAULT) PICFLAG/BYFILE = $(PICFLAG/$@)$(PICFLAG/DEFAULT$(PICFLAG/$@)) # Use $(MAPFLAG:FILENAME=real_file_name) to specify a map file. MAPFLAG = -M FILENAME # Use $(SONAMEFLAG:SONAME=soname) to specify the intrinsic name of a shared obj SONAMEFLAG = -h SONAME # Build shared library SHARED_FLAG = -G # We don't need libCstd.so and librwtools7.so, only libCrun.so CFLAGS += -library=%none LFLAGS += -library=%none LFLAGS += -mt endif # COMPILER_REV >= 5.5 ###################################### # End 5.5 Forte compiler options # ###################################### ###################################### # Begin 5.2 Forte compiler options # ###################################### ifeq ($(COMPILER_REV), 5.2) CFLAGS += $(ARCHFLAG) AOUT_FLAGS += $(ARCHFLAG) LIB_FLAGS += $(ARCHFLAG) LFLAGS += $(ARCHFLAG) ifeq ("${Platform_arch}", "sparc") # Flags for Optimization # [phh] Commented out pending verification that we do indeed want # to potentially bias against u1 and u3 targets. #CFLAGS += -xchip=ultra2 ifdef LP64 # SC5.0 tools on v9 are flakey at -xO4 # [phh] Is this still true for 6.1? OPT_CFLAGS=-xO3 $(EXTRA_OPT_CFLAGS) else OPT_CFLAGS=-xO4 $(EXTRA_OPT_CFLAGS) endif CFLAGS += $(GAMMADIR)/src/os_cpu/solaris_sparc/vm/solaris_sparc.il endif # sparc ifeq ("${Platform_arch_model}", "x86_32") OPT_CFLAGS=-xtarget=pentium $(EXTRA_OPT_CFLAGS) # SC5.0 tools on x86 are flakey at -xO4 # [phh] Is this still true for 6.1? OPT_CFLAGS+=-xO3 CFLAGS += $(GAMMADIR)/src/os_cpu/solaris_x86/vm/solaris_x86_32.il endif # 32bit x86 # no more exceptions CFLAGS/NOEX=-noex # Reduce code bloat by reverting back to 5.0 behavior for static initializers CFLAGS += -Qoption ccfe -one_static_init # PIC is safer for SPARC, and is considerably slower # a file foo.o which wants to compile -pic can set "PICFLAG/foo.o = -PIC" PICFLAG = -KPIC PICFLAG/DEFAULT = $(PICFLAG) # [RGV] Need to figure which files to remove to get link to work #PICFLAG/BETTER = -pic PICFLAG/BETTER = $(PICFLAG/DEFAULT) PICFLAG/BYFILE = $(PICFLAG/$@)$(PICFLAG/DEFAULT$(PICFLAG/$@)) # Would be better if these weren't needed, since we link with CC, but # at present removing them causes run-time errors LFLAGS += -library=Crun LIBS += -library=Crun -lCrun endif # COMPILER_REV == 5.2 ################################## # End 5.2 Forte compiler options # ################################## ################################## # Begin old 5.1 compiler options # ################################## ifeq ($(COMPILER_REV), 5.1) _JUNK_ := $(shell echo >&2 \ "*** ERROR: sparkWorks.make incomplete for 5.1 compiler") @exit 1 endif ################################## # End old 5.1 compiler options # ################################## ################################## # Begin old 5.0 compiler options # ################################## ifeq (${COMPILER_REV}, 5.0) # Had to hoist this higher apparently because of other changes. Must # come before -xarch specification. # NOTE: native says optimize for the machine doing the compile, bad news. CFLAGS += -xtarget=native CFLAGS += $(ARCHFLAG) AOUT_FLAGS += $(ARCHFLAG) LIB_FLAGS += $(ARCHFLAG) LFLAGS += $(ARCHFLAG) CFLAGS += -library=iostream LFLAGS += -library=iostream -library=Crun LIBS += -library=iostream -library=Crun -lCrun # Flags for Optimization ifdef LP64 # SC5.0 tools on v9 are flakey at -xO4 OPT_CFLAGS=-xO3 $(EXTRA_OPT_CFLAGS) else OPT_CFLAGS=-xO4 $(EXTRA_OPT_CFLAGS) endif ifeq ("${Platform_arch}", "sparc") CFLAGS += $(GAMMADIR)/src/os_cpu/solaris_sparc/vm/atomic_solaris_sparc.il endif # sparc ifeq ("${Platform_arch_model}", "x86_32") OPT_CFLAGS=-xtarget=pentium $(EXTRA_OPT_CFLAGS) ifeq ("${COMPILER_REV}", "5.0") # SC5.0 tools on x86 are flakey at -xO4 OPT_CFLAGS+=-xO3 else OPT_CFLAGS+=-xO4 endif CFLAGS += $(GAMMADIR)/src/os_cpu/solaris_x86/vm/solaris_x86_32.il endif # 32bit x86 # The following options run into misaligned ldd problem (raj) #OPT_CFLAGS = -fast -O4 $(ARCHFLAG/sparc) -xchip=ultra # no more exceptions CFLAGS/NOEX=-noex # PIC is safer for SPARC, and is considerably slower # a file foo.o which wants to compile -pic can set "PICFLAG/foo.o = -PIC" PICFLAG = -PIC PICFLAG/DEFAULT = $(PICFLAG) # [RGV] Need to figure which files to remove to get link to work #PICFLAG/BETTER = -pic PICFLAG/BETTER = $(PICFLAG/DEFAULT) PICFLAG/BYFILE = $(PICFLAG/$@)$(PICFLAG/DEFAULT$(PICFLAG/$@)) endif # COMPILER_REV = 5.0 ################################ # End old 5.0 compiler options # ################################ ifeq ("${COMPILER_REV}", "4.2") # 4.2 COMPILERS SHOULD NO LONGER BE USED _JUNK_ := $(shell echo >&2 \ "*** ERROR: SC4.2 compilers are not supported by this code base!") @exit 1 endif # do not include shared lib path in a.outs AOUT_FLAGS += -norunpath LFLAGS_VM = -norunpath -z noversion # need position-indep-code for shared libraries # (ild appears to get errors on PIC code, so we'll try non-PIC for debug) ifeq ($(PICFLAGS),DEFAULT) VM_PICFLAG/LIBJVM = $(PICFLAG/DEFAULT) else VM_PICFLAG/LIBJVM = $(PICFLAG/BYFILE) endif VM_PICFLAG/AOUT = VM_PICFLAG = $(VM_PICFLAG/$(LINK_INTO)) CFLAGS += $(VM_PICFLAG) # less dynamic linking (no PLTs, please) #LIB_FLAGS += $(LINK_MODE) # %%%%% despite -znodefs, -Bsymbolic gets link errors -- Rose LINK_MODE = $(LINK_MODE/$(VERSION)) LINK_MODE/debug = LINK_MODE/optimized = -Bsymbolic -znodefs # Have thread local errnos ifeq ($(shell expr $(COMPILER_REV) \>= 5.5), 1) CFLAGS += -mt else CFLAGS += -D_REENTRANT endif ifdef CC_INTERP # C++ Interpreter CFLAGS += -DCC_INTERP endif # Flags for Debugging DEBUG_CFLAGS = -g FASTDEBUG_CFLAGS = -g0 # The -g0 setting allows the C++ frontend to inline, which is a big win. # Special global options for SS12 ifeq ($(COMPILER_REV),5.9) # There appears to be multiple issues with the new Dwarf2 debug format, so # we tell the compiler to use the older 'stabs' debug format all the time. # Note that this needs to be used in optimized compiles too to be 100%. # This is a workaround for SS12 (5.9) bug 6694600 CFLAGS += -xdebugformat=stabs endif # Enable the following CFLAGS additions if you need to compare the # built ELF objects. # # The -g option makes static data global and the "-Qoption ccfe # -xglobalstatic" option tells the compiler to not globalize static # data using a unique globalization prefix. Instead force the use of # a static globalization prefix based on the source filepath so the # objects from two identical compilations are the same. #DEBUG_CFLAGS += -Qoption ccfe -xglobalstatic #FASTDEBUG_CFLAGS += -Qoption ccfe -xglobalstatic ifeq (${COMPILER_REV}, 5.2) COMPILER_DATE := $(shell $(CPP) -V 2>&1 | awk '{ print $$NF; }') ifeq (${COMPILER_DATE}, 2001/01/31) # disable -g0 in fastdebug since SC6.1 dated 2001/01/31 seems to be buggy # use an innocuous value because it will get -g if it's empty FASTDEBUG_CFLAGS = -c endif endif # Uncomment or 'gmake CFLAGS_BROWSE=-sbfast' to get source browser information. # CFLAGS_BROWSE = -sbfast CFLAGS += $(CFLAGS_BROWSE) # ILD is gone as of SS11 (5.8), not supportted in SS10 (5.7) ifeq ($(shell expr $(COMPILER_REV) \< 5.7), 1) # use ild when debugging (but when optimizing we want reproducible results) ILDFLAG = $(ILDFLAG/$(VERSION)) ILDFLAG/debug = -xildon ILDFLAG/optimized = AOUT_FLAGS += $(ILDFLAG) endif # Where to put the *.o files (a.out, or shared library)? LINK_INTO = $(LINK_INTO/$(VERSION)) LINK_INTO/debug = LIBJVM LINK_INTO/optimized = LIBJVM # We link the debug version into the a.out because: # 1. ild works on a.out but not shared libraries, and using ild # can cut rebuild times by 25% for small changes. (ILD is gone in SS11) # 2. dbx cannot gracefully set breakpoints in shared libraries # # apply this setting to link into the shared library even in the debug version: ifdef LP64 LINK_INTO = LIBJVM else #LINK_INTO = LIBJVM endif MCS = /usr/ccs/bin/mcs STRIP = /usr/ccs/bin/strip # Solaris platforms collect lots of redundant file-ident lines, # to the point of wasting a significant percentage of file space. # (The text is stored in ELF .comment sections, contributed by # all "#pragma ident" directives in header and source files.) # This command "compresses" the .comment sections simply by # removing repeated lines. The data can be extracted from # binaries in the field by using "mcs -p libjvm.so" or the older # command "what libjvm.so". LINK_LIB.CC/POST_HOOK += $(MCS) -c $@ || exit 1; # (The exit 1 is necessary to cause a build failure if the command fails and # multiple commands are strung together, and the final semicolon is necessary # since the hook must terminate itself as a valid command.) # Also, strip debug and line number information (worth about 1.7Mb). STRIP_LIB.CC/POST_HOOK = $(STRIP) -x $@ || exit 1; # STRIP_LIB.CC/POST_HOOK is incorporated into LINK_LIB.CC/POST_HOOK # in certain configurations, such as product.make. Other configurations, # such as debug.make, do not include the strip operation.