Mercurial > hg > graal-compiler
annotate src/cpu/x86/vm/interp_masm_x86_32.cpp @ 724:2bf529ef0adb
6831323: Use v8plus as minimum required hardware for current Hotspot sources
Summary: Use -xarch=v8plus as default for 32-bits VM on sparc.
Reviewed-by: never, twisti
author | kvn |
---|---|
date | Fri, 17 Apr 2009 09:38:32 -0700 |
parents | e5b0439ef4ae |
children | be93aad57795 |
rev | line source |
---|---|
0 | 1 /* |
579 | 2 * Copyright 1997-2009 Sun Microsystems, Inc. All Rights Reserved. |
0 | 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
4 * | |
5 * This code is free software; you can redistribute it and/or modify it | |
6 * under the terms of the GNU General Public License version 2 only, as | |
7 * published by the Free Software Foundation. | |
8 * | |
9 * This code is distributed in the hope that it will be useful, but WITHOUT | |
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 * version 2 for more details (a copy is included in the LICENSE file that | |
13 * accompanied this code). | |
14 * | |
15 * You should have received a copy of the GNU General Public License version | |
16 * 2 along with this work; if not, write to the Free Software Foundation, | |
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
18 * | |
19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, | |
20 * CA 95054 USA or visit www.sun.com if you need additional information or | |
21 * have any questions. | |
22 * | |
23 */ | |
24 | |
25 #include "incls/_precompiled.incl" | |
26 #include "incls/_interp_masm_x86_32.cpp.incl" | |
27 | |
28 | |
29 // Implementation of InterpreterMacroAssembler | |
30 #ifdef CC_INTERP | |
31 void InterpreterMacroAssembler::get_method(Register reg) { | |
304 | 32 movptr(reg, Address(rbp, -(sizeof(BytecodeInterpreter) + 2 * wordSize))); |
33 movptr(reg, Address(reg, byte_offset_of(BytecodeInterpreter, _method))); | |
0 | 34 } |
35 #endif // CC_INTERP | |
36 | |
37 | |
38 #ifndef CC_INTERP | |
39 void InterpreterMacroAssembler::call_VM_leaf_base( | |
40 address entry_point, | |
41 int number_of_arguments | |
42 ) { | |
43 // interpreter specific | |
44 // | |
45 // Note: No need to save/restore bcp & locals (rsi & rdi) pointer | |
46 // since these are callee saved registers and no blocking/ | |
47 // GC can happen in leaf calls. | |
48 // Further Note: DO NOT save/restore bcp/locals. If a caller has | |
49 // already saved them so that it can use rsi/rdi as temporaries | |
50 // then a save/restore here will DESTROY the copy the caller | |
51 // saved! There used to be a save_bcp() that only happened in | |
52 // the ASSERT path (no restore_bcp). Which caused bizarre failures | |
53 // when jvm built with ASSERTs. | |
54 #ifdef ASSERT | |
55 { Label L; | |
304 | 56 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); |
0 | 57 jcc(Assembler::equal, L); |
58 stop("InterpreterMacroAssembler::call_VM_leaf_base: last_sp != NULL"); | |
59 bind(L); | |
60 } | |
61 #endif | |
62 // super call | |
63 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); | |
64 // interpreter specific | |
65 | |
66 // Used to ASSERT that rsi/rdi were equal to frame's bcp/locals | |
67 // but since they may not have been saved (and we don't want to | |
68 // save them here (see note above) the assert is invalid. | |
69 } | |
70 | |
71 | |
72 void InterpreterMacroAssembler::call_VM_base( | |
73 Register oop_result, | |
74 Register java_thread, | |
75 Register last_java_sp, | |
76 address entry_point, | |
77 int number_of_arguments, | |
78 bool check_exceptions | |
79 ) { | |
80 #ifdef ASSERT | |
81 { Label L; | |
304 | 82 cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); |
0 | 83 jcc(Assembler::equal, L); |
84 stop("InterpreterMacroAssembler::call_VM_base: last_sp != NULL"); | |
85 bind(L); | |
86 } | |
87 #endif /* ASSERT */ | |
88 // interpreter specific | |
89 // | |
90 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't | |
91 // really make a difference for these runtime calls, since they are | |
92 // slow anyway. Btw., bcp must be saved/restored since it may change | |
93 // due to GC. | |
94 assert(java_thread == noreg , "not expecting a precomputed java thread"); | |
95 save_bcp(); | |
96 // super call | |
97 MacroAssembler::call_VM_base(oop_result, java_thread, last_java_sp, entry_point, number_of_arguments, check_exceptions); | |
98 // interpreter specific | |
99 restore_bcp(); | |
100 restore_locals(); | |
101 } | |
102 | |
103 | |
104 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { | |
105 if (JvmtiExport::can_pop_frame()) { | |
106 Label L; | |
107 // Initiate popframe handling only if it is not already being processed. If the flag | |
108 // has the popframe_processing bit set, it means that this code is called *during* popframe | |
109 // handling - we don't want to reenter. | |
110 Register pop_cond = java_thread; // Not clear if any other register is available... | |
111 movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset())); | |
112 testl(pop_cond, JavaThread::popframe_pending_bit); | |
113 jcc(Assembler::zero, L); | |
114 testl(pop_cond, JavaThread::popframe_processing_bit); | |
115 jcc(Assembler::notZero, L); | |
116 // Call Interpreter::remove_activation_preserving_args_entry() to get the | |
117 // address of the same-named entrypoint in the generated interpreter code. | |
118 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); | |
119 jmp(rax); | |
120 bind(L); | |
121 get_thread(java_thread); | |
122 } | |
123 } | |
124 | |
125 | |
126 void InterpreterMacroAssembler::load_earlyret_value(TosState state) { | |
127 get_thread(rcx); | |
128 movl(rcx, Address(rcx, JavaThread::jvmti_thread_state_offset())); | |
129 const Address tos_addr (rcx, JvmtiThreadState::earlyret_tos_offset()); | |
130 const Address oop_addr (rcx, JvmtiThreadState::earlyret_oop_offset()); | |
131 const Address val_addr (rcx, JvmtiThreadState::earlyret_value_offset()); | |
132 const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset() | |
133 + in_ByteSize(wordSize)); | |
134 switch (state) { | |
304 | 135 case atos: movptr(rax, oop_addr); |
512
db4caa99ef11
6787106: Hotspot 32 bit build fails on platforms having different definitions for intptr_t & int32_t
xlu
parents:
337
diff
changeset
|
136 movptr(oop_addr, NULL_WORD); |
0 | 137 verify_oop(rax, state); break; |
304 | 138 case ltos: |
139 movl(rdx, val_addr1); // fall through | |
0 | 140 case btos: // fall through |
141 case ctos: // fall through | |
142 case stos: // fall through | |
143 case itos: movl(rax, val_addr); break; | |
144 case ftos: fld_s(val_addr); break; | |
145 case dtos: fld_d(val_addr); break; | |
146 case vtos: /* nothing to do */ break; | |
147 default : ShouldNotReachHere(); | |
148 } | |
149 // Clean up tos value in the thread object | |
304 | 150 movl(tos_addr, (int32_t) ilgl); |
512
db4caa99ef11
6787106: Hotspot 32 bit build fails on platforms having different definitions for intptr_t & int32_t
xlu
parents:
337
diff
changeset
|
151 movptr(val_addr, NULL_WORD); |
533
dc3ad84615cf
6795913: A few remaining wrong casts need to be fixed for building hotspot successfully on Mac OS.
xlu
parents:
512
diff
changeset
|
152 NOT_LP64(movptr(val_addr1, NULL_WORD)); |
0 | 153 } |
154 | |
155 | |
156 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { | |
157 if (JvmtiExport::can_force_early_return()) { | |
158 Label L; | |
159 Register tmp = java_thread; | |
304 | 160 movptr(tmp, Address(tmp, JavaThread::jvmti_thread_state_offset())); |
161 testptr(tmp, tmp); | |
0 | 162 jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit; |
163 | |
164 // Initiate earlyret handling only if it is not already being processed. | |
165 // If the flag has the earlyret_processing bit set, it means that this code | |
166 // is called *during* earlyret handling - we don't want to reenter. | |
167 movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset())); | |
168 cmpl(tmp, JvmtiThreadState::earlyret_pending); | |
169 jcc(Assembler::notEqual, L); | |
170 | |
171 // Call Interpreter::remove_activation_early_entry() to get the address of the | |
172 // same-named entrypoint in the generated interpreter code. | |
173 get_thread(java_thread); | |
304 | 174 movptr(tmp, Address(java_thread, JavaThread::jvmti_thread_state_offset())); |
0 | 175 pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset())); |
176 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1); | |
177 jmp(rax); | |
178 bind(L); | |
179 get_thread(java_thread); | |
180 } | |
181 } | |
182 | |
183 | |
184 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) { | |
185 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); | |
186 movl(reg, Address(rsi, bcp_offset)); | |
304 | 187 bswapl(reg); |
0 | 188 shrl(reg, 16); |
189 } | |
190 | |
191 | |
192 void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, Register index, int bcp_offset) { | |
193 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); | |
194 assert(cache != index, "must use different registers"); | |
622
56aae7be60d4
6812678: macro assembler needs delayed binding of a few constants (for 6655638)
jrose
parents:
533
diff
changeset
|
195 load_unsigned_short(index, Address(rsi, bcp_offset)); |
304 | 196 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); |
0 | 197 assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below"); |
304 | 198 shlptr(index, 2); // convert from field index to ConstantPoolCacheEntry index |
0 | 199 } |
200 | |
201 | |
202 void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, Register tmp, int bcp_offset) { | |
203 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); | |
204 assert(cache != tmp, "must use different register"); | |
622
56aae7be60d4
6812678: macro assembler needs delayed binding of a few constants (for 6655638)
jrose
parents:
533
diff
changeset
|
205 load_unsigned_short(tmp, Address(rsi, bcp_offset)); |
0 | 206 assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below"); |
207 // convert from field index to ConstantPoolCacheEntry index | |
208 // and from word offset to byte offset | |
209 shll(tmp, 2 + LogBytesPerWord); | |
304 | 210 movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); |
0 | 211 // skip past the header |
304 | 212 addptr(cache, in_bytes(constantPoolCacheOopDesc::base_offset())); |
213 addptr(cache, tmp); // construct pointer to cache entry | |
0 | 214 } |
215 | |
216 | |
217 // Generate a subtype check: branch to ok_is_subtype if sub_klass is | |
218 // a subtype of super_klass. EAX holds the super_klass. Blows ECX. | |
219 // Resets EDI to locals. Register sub_klass cannot be any of the above. | |
220 void InterpreterMacroAssembler::gen_subtype_check( Register Rsub_klass, Label &ok_is_subtype ) { | |
221 assert( Rsub_klass != rax, "rax, holds superklass" ); | |
644
c517646eef23
6813212: factor duplicated assembly code for general subclass check (for 6655638)
jrose
parents:
625
diff
changeset
|
222 assert( Rsub_klass != rcx, "used as a temp" ); |
c517646eef23
6813212: factor duplicated assembly code for general subclass check (for 6655638)
jrose
parents:
625
diff
changeset
|
223 assert( Rsub_klass != rdi, "used as a temp, restored from locals" ); |
0 | 224 |
225 // Profile the not-null value's klass. | |
644
c517646eef23
6813212: factor duplicated assembly code for general subclass check (for 6655638)
jrose
parents:
625
diff
changeset
|
226 profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi |
0 | 227 |
644
c517646eef23
6813212: factor duplicated assembly code for general subclass check (for 6655638)
jrose
parents:
625
diff
changeset
|
228 // Do the check. |
c517646eef23
6813212: factor duplicated assembly code for general subclass check (for 6655638)
jrose
parents:
625
diff
changeset
|
229 check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx |
0 | 230 |
644
c517646eef23
6813212: factor duplicated assembly code for general subclass check (for 6655638)
jrose
parents:
625
diff
changeset
|
231 // Profile the failure of the check. |
0 | 232 profile_typecheck_failed(rcx); // blows rcx |
233 } | |
234 | |
235 void InterpreterMacroAssembler::f2ieee() { | |
236 if (IEEEPrecision) { | |
237 fstp_s(Address(rsp, 0)); | |
238 fld_s(Address(rsp, 0)); | |
239 } | |
240 } | |
241 | |
242 | |
243 void InterpreterMacroAssembler::d2ieee() { | |
244 if (IEEEPrecision) { | |
245 fstp_d(Address(rsp, 0)); | |
246 fld_d(Address(rsp, 0)); | |
247 } | |
248 } | |
249 | |
250 // Java Expression Stack | |
251 | |
252 #ifdef ASSERT | |
253 void InterpreterMacroAssembler::verify_stack_tag(frame::Tag t) { | |
254 if (TaggedStackInterpreter) { | |
255 Label okay; | |
304 | 256 cmpptr(Address(rsp, wordSize), (int32_t)t); |
0 | 257 jcc(Assembler::equal, okay); |
258 // Also compare if the stack value is zero, then the tag might | |
259 // not have been set coming from deopt. | |
304 | 260 cmpptr(Address(rsp, 0), 0); |
0 | 261 jcc(Assembler::equal, okay); |
262 stop("Java Expression stack tag value is bad"); | |
263 bind(okay); | |
264 } | |
265 } | |
266 #endif // ASSERT | |
267 | |
268 void InterpreterMacroAssembler::pop_ptr(Register r) { | |
269 debug_only(verify_stack_tag(frame::TagReference)); | |
304 | 270 pop(r); |
271 if (TaggedStackInterpreter) addptr(rsp, 1 * wordSize); | |
0 | 272 } |
273 | |
274 void InterpreterMacroAssembler::pop_ptr(Register r, Register tag) { | |
304 | 275 pop(r); |
0 | 276 // Tag may not be reference for jsr, can be returnAddress |
304 | 277 if (TaggedStackInterpreter) pop(tag); |
0 | 278 } |
279 | |
280 void InterpreterMacroAssembler::pop_i(Register r) { | |
281 debug_only(verify_stack_tag(frame::TagValue)); | |
304 | 282 pop(r); |
283 if (TaggedStackInterpreter) addptr(rsp, 1 * wordSize); | |
0 | 284 } |
285 | |
286 void InterpreterMacroAssembler::pop_l(Register lo, Register hi) { | |
287 debug_only(verify_stack_tag(frame::TagValue)); | |
304 | 288 pop(lo); |
289 if (TaggedStackInterpreter) addptr(rsp, 1 * wordSize); | |
0 | 290 debug_only(verify_stack_tag(frame::TagValue)); |
304 | 291 pop(hi); |
292 if (TaggedStackInterpreter) addptr(rsp, 1 * wordSize); | |
0 | 293 } |
294 | |
295 void InterpreterMacroAssembler::pop_f() { | |
296 debug_only(verify_stack_tag(frame::TagValue)); | |
297 fld_s(Address(rsp, 0)); | |
304 | 298 addptr(rsp, 1 * wordSize); |
299 if (TaggedStackInterpreter) addptr(rsp, 1 * wordSize); | |
0 | 300 } |
301 | |
302 void InterpreterMacroAssembler::pop_d() { | |
303 // Write double to stack contiguously and load into ST0 | |
304 pop_dtos_to_rsp(); | |
305 fld_d(Address(rsp, 0)); | |
304 | 306 addptr(rsp, 2 * wordSize); |
0 | 307 } |
308 | |
309 | |
310 // Pop the top of the java expression stack to execution stack (which | |
311 // happens to be the same place). | |
312 void InterpreterMacroAssembler::pop_dtos_to_rsp() { | |
313 if (TaggedStackInterpreter) { | |
314 // Pop double value into scratch registers | |
315 debug_only(verify_stack_tag(frame::TagValue)); | |
304 | 316 pop(rax); |
317 addptr(rsp, 1* wordSize); | |
0 | 318 debug_only(verify_stack_tag(frame::TagValue)); |
304 | 319 pop(rdx); |
320 addptr(rsp, 1* wordSize); | |
321 push(rdx); | |
322 push(rax); | |
0 | 323 } |
324 } | |
325 | |
326 void InterpreterMacroAssembler::pop_ftos_to_rsp() { | |
327 if (TaggedStackInterpreter) { | |
328 debug_only(verify_stack_tag(frame::TagValue)); | |
304 | 329 pop(rax); |
330 addptr(rsp, 1 * wordSize); | |
331 push(rax); // ftos is at rsp | |
0 | 332 } |
333 } | |
334 | |
335 void InterpreterMacroAssembler::pop(TosState state) { | |
336 switch (state) { | |
337 case atos: pop_ptr(rax); break; | |
338 case btos: // fall through | |
339 case ctos: // fall through | |
340 case stos: // fall through | |
341 case itos: pop_i(rax); break; | |
342 case ltos: pop_l(rax, rdx); break; | |
343 case ftos: pop_f(); break; | |
344 case dtos: pop_d(); break; | |
345 case vtos: /* nothing to do */ break; | |
346 default : ShouldNotReachHere(); | |
347 } | |
348 verify_oop(rax, state); | |
349 } | |
350 | |
351 void InterpreterMacroAssembler::push_ptr(Register r) { | |
304 | 352 if (TaggedStackInterpreter) push(frame::TagReference); |
353 push(r); | |
0 | 354 } |
355 | |
356 void InterpreterMacroAssembler::push_ptr(Register r, Register tag) { | |
304 | 357 if (TaggedStackInterpreter) push(tag); // tag first |
358 push(r); | |
0 | 359 } |
360 | |
361 void InterpreterMacroAssembler::push_i(Register r) { | |
304 | 362 if (TaggedStackInterpreter) push(frame::TagValue); |
363 push(r); | |
0 | 364 } |
365 | |
366 void InterpreterMacroAssembler::push_l(Register lo, Register hi) { | |
304 | 367 if (TaggedStackInterpreter) push(frame::TagValue); |
368 push(hi); | |
369 if (TaggedStackInterpreter) push(frame::TagValue); | |
370 push(lo); | |
0 | 371 } |
372 | |
373 void InterpreterMacroAssembler::push_f() { | |
304 | 374 if (TaggedStackInterpreter) push(frame::TagValue); |
0 | 375 // Do not schedule for no AGI! Never write beyond rsp! |
304 | 376 subptr(rsp, 1 * wordSize); |
0 | 377 fstp_s(Address(rsp, 0)); |
378 } | |
379 | |
380 void InterpreterMacroAssembler::push_d(Register r) { | |
381 if (TaggedStackInterpreter) { | |
382 // Double values are stored as: | |
383 // tag | |
384 // high | |
385 // tag | |
386 // low | |
304 | 387 push(frame::TagValue); |
388 subptr(rsp, 3 * wordSize); | |
0 | 389 fstp_d(Address(rsp, 0)); |
390 // move high word up to slot n-1 | |
391 movl(r, Address(rsp, 1*wordSize)); | |
392 movl(Address(rsp, 2*wordSize), r); | |
393 // move tag | |
394 movl(Address(rsp, 1*wordSize), frame::TagValue); | |
395 } else { | |
396 // Do not schedule for no AGI! Never write beyond rsp! | |
304 | 397 subptr(rsp, 2 * wordSize); |
0 | 398 fstp_d(Address(rsp, 0)); |
399 } | |
400 } | |
401 | |
402 | |
403 void InterpreterMacroAssembler::push(TosState state) { | |
404 verify_oop(rax, state); | |
405 switch (state) { | |
406 case atos: push_ptr(rax); break; | |
407 case btos: // fall through | |
408 case ctos: // fall through | |
409 case stos: // fall through | |
410 case itos: push_i(rax); break; | |
411 case ltos: push_l(rax, rdx); break; | |
412 case ftos: push_f(); break; | |
413 case dtos: push_d(rax); break; | |
414 case vtos: /* nothing to do */ break; | |
415 default : ShouldNotReachHere(); | |
416 } | |
417 } | |
418 | |
419 | |
420 // Tagged stack helpers for swap and dup | |
421 void InterpreterMacroAssembler::load_ptr_and_tag(int n, Register val, | |
422 Register tag) { | |
304 | 423 movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n))); |
0 | 424 if (TaggedStackInterpreter) { |
304 | 425 movptr(tag, Address(rsp, Interpreter::expr_tag_offset_in_bytes(n))); |
0 | 426 } |
427 } | |
428 | |
429 void InterpreterMacroAssembler::store_ptr_and_tag(int n, Register val, | |
430 Register tag) { | |
304 | 431 movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val); |
0 | 432 if (TaggedStackInterpreter) { |
304 | 433 movptr(Address(rsp, Interpreter::expr_tag_offset_in_bytes(n)), tag); |
0 | 434 } |
435 } | |
436 | |
437 | |
438 // Tagged local support | |
439 void InterpreterMacroAssembler::tag_local(frame::Tag tag, int n) { | |
440 if (TaggedStackInterpreter) { | |
441 if (tag == frame::TagCategory2) { | |
304 | 442 movptr(Address(rdi, Interpreter::local_tag_offset_in_bytes(n+1)), (int32_t)frame::TagValue); |
443 movptr(Address(rdi, Interpreter::local_tag_offset_in_bytes(n)), (int32_t)frame::TagValue); | |
0 | 444 } else { |
304 | 445 movptr(Address(rdi, Interpreter::local_tag_offset_in_bytes(n)), (int32_t)tag); |
0 | 446 } |
447 } | |
448 } | |
449 | |
450 void InterpreterMacroAssembler::tag_local(frame::Tag tag, Register idx) { | |
451 if (TaggedStackInterpreter) { | |
452 if (tag == frame::TagCategory2) { | |
304 | 453 movptr(Address(rdi, idx, Interpreter::stackElementScale(), |
454 Interpreter::local_tag_offset_in_bytes(1)), (int32_t)frame::TagValue); | |
455 movptr(Address(rdi, idx, Interpreter::stackElementScale(), | |
456 Interpreter::local_tag_offset_in_bytes(0)), (int32_t)frame::TagValue); | |
0 | 457 } else { |
304 | 458 movptr(Address(rdi, idx, Interpreter::stackElementScale(), |
459 Interpreter::local_tag_offset_in_bytes(0)), (int32_t)tag); | |
0 | 460 } |
461 } | |
462 } | |
463 | |
464 void InterpreterMacroAssembler::tag_local(Register tag, Register idx) { | |
465 if (TaggedStackInterpreter) { | |
466 // can only be TagValue or TagReference | |
304 | 467 movptr(Address(rdi, idx, Interpreter::stackElementScale(), |
0 | 468 Interpreter::local_tag_offset_in_bytes(0)), tag); |
469 } | |
470 } | |
471 | |
472 | |
473 void InterpreterMacroAssembler::tag_local(Register tag, int n) { | |
474 if (TaggedStackInterpreter) { | |
475 // can only be TagValue or TagReference | |
304 | 476 movptr(Address(rdi, Interpreter::local_tag_offset_in_bytes(n)), tag); |
0 | 477 } |
478 } | |
479 | |
480 #ifdef ASSERT | |
481 void InterpreterMacroAssembler::verify_local_tag(frame::Tag tag, int n) { | |
482 if (TaggedStackInterpreter) { | |
483 frame::Tag t = tag; | |
484 if (tag == frame::TagCategory2) { | |
485 Label nbl; | |
486 t = frame::TagValue; // change to what is stored in locals | |
304 | 487 cmpptr(Address(rdi, Interpreter::local_tag_offset_in_bytes(n+1)), (int32_t)t); |
0 | 488 jcc(Assembler::equal, nbl); |
489 stop("Local tag is bad for long/double"); | |
490 bind(nbl); | |
491 } | |
492 Label notBad; | |
304 | 493 cmpptr(Address(rdi, Interpreter::local_tag_offset_in_bytes(n)), (int32_t)t); |
0 | 494 jcc(Assembler::equal, notBad); |
495 // Also compare if the local value is zero, then the tag might | |
496 // not have been set coming from deopt. | |
304 | 497 cmpptr(Address(rdi, Interpreter::local_offset_in_bytes(n)), 0); |
0 | 498 jcc(Assembler::equal, notBad); |
499 stop("Local tag is bad"); | |
500 bind(notBad); | |
501 } | |
502 } | |
503 | |
504 void InterpreterMacroAssembler::verify_local_tag(frame::Tag tag, Register idx) { | |
505 if (TaggedStackInterpreter) { | |
506 frame::Tag t = tag; | |
507 if (tag == frame::TagCategory2) { | |
508 Label nbl; | |
509 t = frame::TagValue; // change to what is stored in locals | |
304 | 510 cmpptr(Address(rdi, idx, Interpreter::stackElementScale(), |
511 Interpreter::local_tag_offset_in_bytes(1)), (int32_t)t); | |
0 | 512 jcc(Assembler::equal, nbl); |
513 stop("Local tag is bad for long/double"); | |
514 bind(nbl); | |
515 } | |
516 Label notBad; | |
517 cmpl(Address(rdi, idx, Interpreter::stackElementScale(), | |
304 | 518 Interpreter::local_tag_offset_in_bytes(0)), (int32_t)t); |
0 | 519 jcc(Assembler::equal, notBad); |
520 // Also compare if the local value is zero, then the tag might | |
521 // not have been set coming from deopt. | |
304 | 522 cmpptr(Address(rdi, idx, Interpreter::stackElementScale(), |
0 | 523 Interpreter::local_offset_in_bytes(0)), 0); |
524 jcc(Assembler::equal, notBad); | |
525 stop("Local tag is bad"); | |
526 bind(notBad); | |
527 | |
528 } | |
529 } | |
530 #endif // ASSERT | |
531 | |
532 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point) { | |
533 MacroAssembler::call_VM_leaf_base(entry_point, 0); | |
534 } | |
535 | |
536 | |
537 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point, Register arg_1) { | |
304 | 538 push(arg_1); |
0 | 539 MacroAssembler::call_VM_leaf_base(entry_point, 1); |
540 } | |
541 | |
542 | |
543 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point, Register arg_1, Register arg_2) { | |
304 | 544 push(arg_2); |
545 push(arg_1); | |
0 | 546 MacroAssembler::call_VM_leaf_base(entry_point, 2); |
547 } | |
548 | |
549 | |
550 void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point, Register arg_1, Register arg_2, Register arg_3) { | |
304 | 551 push(arg_3); |
552 push(arg_2); | |
553 push(arg_1); | |
0 | 554 MacroAssembler::call_VM_leaf_base(entry_point, 3); |
555 } | |
556 | |
557 | |
710 | 558 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { |
0 | 559 // set sender sp |
304 | 560 lea(rsi, Address(rsp, wordSize)); |
0 | 561 // record last_sp |
304 | 562 movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), rsi); |
710 | 563 } |
564 | |
565 | |
566 // Jump to from_interpreted entry of a call unless single stepping is possible | |
567 // in this thread in which case we must call the i2i entry | |
568 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { | |
569 prepare_to_jump_from_interpreted(); | |
0 | 570 |
571 if (JvmtiExport::can_post_interpreter_events()) { | |
572 Label run_compiled_code; | |
573 // JVMTI events, such as single-stepping, are implemented partly by avoiding running | |
574 // compiled code in threads for which the event is enabled. Check here for | |
575 // interp_only_mode if these events CAN be enabled. | |
576 get_thread(temp); | |
577 // interp_only is an int, on little endian it is sufficient to test the byte only | |
578 // Is a cmpl faster (ce | |
579 cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0); | |
580 jcc(Assembler::zero, run_compiled_code); | |
581 jmp(Address(method, methodOopDesc::interpreter_entry_offset())); | |
582 bind(run_compiled_code); | |
583 } | |
584 | |
585 jmp(Address(method, methodOopDesc::from_interpreted_offset())); | |
586 | |
587 } | |
588 | |
589 | |
590 // The following two routines provide a hook so that an implementation | |
591 // can schedule the dispatch in two parts. Intel does not do this. | |
592 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { | |
593 // Nothing Intel-specific to be done here. | |
594 } | |
595 | |
596 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { | |
597 dispatch_next(state, step); | |
598 } | |
599 | |
600 void InterpreterMacroAssembler::dispatch_base(TosState state, address* table, | |
601 bool verifyoop) { | |
602 verify_FPU(1, state); | |
603 if (VerifyActivationFrameSize) { | |
604 Label L; | |
304 | 605 mov(rcx, rbp); |
606 subptr(rcx, rsp); | |
0 | 607 int min_frame_size = (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * wordSize; |
304 | 608 cmpptr(rcx, min_frame_size); |
0 | 609 jcc(Assembler::greaterEqual, L); |
610 stop("broken stack frame"); | |
611 bind(L); | |
612 } | |
613 if (verifyoop) verify_oop(rax, state); | |
304 | 614 Address index(noreg, rbx, Address::times_ptr); |
0 | 615 ExternalAddress tbl((address)table); |
616 ArrayAddress dispatch(tbl, index); | |
617 jump(dispatch); | |
618 } | |
619 | |
620 | |
621 void InterpreterMacroAssembler::dispatch_only(TosState state) { | |
622 dispatch_base(state, Interpreter::dispatch_table(state)); | |
623 } | |
624 | |
625 | |
626 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { | |
627 dispatch_base(state, Interpreter::normal_table(state)); | |
628 } | |
629 | |
630 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { | |
631 dispatch_base(state, Interpreter::normal_table(state), false); | |
632 } | |
633 | |
634 | |
635 void InterpreterMacroAssembler::dispatch_next(TosState state, int step) { | |
636 // load next bytecode (load before advancing rsi to prevent AGI) | |
637 load_unsigned_byte(rbx, Address(rsi, step)); | |
638 // advance rsi | |
639 increment(rsi, step); | |
640 dispatch_base(state, Interpreter::dispatch_table(state)); | |
641 } | |
642 | |
643 | |
644 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { | |
645 // load current bytecode | |
646 load_unsigned_byte(rbx, Address(rsi, 0)); | |
647 dispatch_base(state, table); | |
648 } | |
649 | |
650 // remove activation | |
651 // | |
652 // Unlock the receiver if this is a synchronized method. | |
653 // Unlock any Java monitors from syncronized blocks. | |
654 // Remove the activation from the stack. | |
655 // | |
656 // If there are locked Java monitors | |
657 // If throw_monitor_exception | |
658 // throws IllegalMonitorStateException | |
659 // Else if install_monitor_exception | |
660 // installs IllegalMonitorStateException | |
661 // Else | |
662 // no error processing | |
663 void InterpreterMacroAssembler::remove_activation(TosState state, Register ret_addr, | |
664 bool throw_monitor_exception, | |
665 bool install_monitor_exception, | |
666 bool notify_jvmdi) { | |
667 // Note: Registers rax, rdx and FPU ST(0) may be in use for the result | |
668 // check if synchronized method | |
669 Label unlocked, unlock, no_unlock; | |
670 | |
671 get_thread(rcx); | |
672 const Address do_not_unlock_if_synchronized(rcx, | |
673 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); | |
674 | |
675 movbool(rbx, do_not_unlock_if_synchronized); | |
304 | 676 mov(rdi,rbx); |
0 | 677 movbool(do_not_unlock_if_synchronized, false); // reset the flag |
678 | |
304 | 679 movptr(rbx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); // get method access flags |
0 | 680 movl(rcx, Address(rbx, methodOopDesc::access_flags_offset())); |
681 | |
682 testl(rcx, JVM_ACC_SYNCHRONIZED); | |
683 jcc(Assembler::zero, unlocked); | |
684 | |
685 // Don't unlock anything if the _do_not_unlock_if_synchronized flag | |
686 // is set. | |
304 | 687 mov(rcx,rdi); |
0 | 688 testbool(rcx); |
689 jcc(Assembler::notZero, no_unlock); | |
690 | |
691 // unlock monitor | |
692 push(state); // save result | |
693 | |
694 // BasicObjectLock will be first in list, since this is a synchronized method. However, need | |
695 // to check that the object has not been unlocked by an explicit monitorexit bytecode. | |
696 const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * wordSize - (int)sizeof(BasicObjectLock)); | |
304 | 697 lea (rdx, monitor); // address of first monitor |
0 | 698 |
304 | 699 movptr (rax, Address(rdx, BasicObjectLock::obj_offset_in_bytes())); |
700 testptr(rax, rax); | |
701 jcc (Assembler::notZero, unlock); | |
0 | 702 |
703 pop(state); | |
704 if (throw_monitor_exception) { | |
705 empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow | |
706 | |
707 // Entry already unlocked, need to throw exception | |
708 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception)); | |
709 should_not_reach_here(); | |
710 } else { | |
711 // Monitor already unlocked during a stack unroll. | |
712 // If requested, install an illegal_monitor_state_exception. | |
713 // Continue with stack unrolling. | |
714 if (install_monitor_exception) { | |
715 empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow | |
716 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception)); | |
717 } | |
718 jmp(unlocked); | |
719 } | |
720 | |
721 bind(unlock); | |
722 unlock_object(rdx); | |
723 pop(state); | |
724 | |
725 // Check that for block-structured locking (i.e., that all locked objects has been unlocked) | |
726 bind(unlocked); | |
727 | |
728 // rax, rdx: Might contain return value | |
729 | |
730 // Check that all monitors are unlocked | |
731 { | |
732 Label loop, exception, entry, restart; | |
733 const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; | |
734 const Address monitor_block_top(rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize); | |
735 const Address monitor_block_bot(rbp, frame::interpreter_frame_initial_sp_offset * wordSize); | |
736 | |
737 bind(restart); | |
304 | 738 movptr(rcx, monitor_block_top); // points to current entry, starting with top-most entry |
739 lea(rbx, monitor_block_bot); // points to word before bottom of monitor block | |
0 | 740 jmp(entry); |
741 | |
742 // Entry already locked, need to throw exception | |
743 bind(exception); | |
744 | |
745 if (throw_monitor_exception) { | |
746 empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow | |
747 | |
748 // Throw exception | |
749 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception)); | |
750 should_not_reach_here(); | |
751 } else { | |
752 // Stack unrolling. Unlock object and install illegal_monitor_exception | |
753 // Unlock does not block, so don't have to worry about the frame | |
754 | |
755 push(state); | |
304 | 756 mov(rdx, rcx); |
0 | 757 unlock_object(rdx); |
758 pop(state); | |
759 | |
760 if (install_monitor_exception) { | |
761 empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow | |
762 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception)); | |
763 } | |
764 | |
765 jmp(restart); | |
766 } | |
767 | |
768 bind(loop); | |
304 | 769 cmpptr(Address(rcx, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); // check if current entry is used |
0 | 770 jcc(Assembler::notEqual, exception); |
771 | |
304 | 772 addptr(rcx, entry_size); // otherwise advance to next entry |
0 | 773 bind(entry); |
304 | 774 cmpptr(rcx, rbx); // check if bottom reached |
0 | 775 jcc(Assembler::notEqual, loop); // if not at bottom then check this entry |
776 } | |
777 | |
778 bind(no_unlock); | |
779 | |
780 // jvmti support | |
781 if (notify_jvmdi) { | |
782 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA | |
783 } else { | |
784 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA | |
785 } | |
786 | |
787 // remove activation | |
304 | 788 movptr(rbx, Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); // get sender sp |
0 | 789 leave(); // remove frame anchor |
304 | 790 pop(ret_addr); // get return address |
791 mov(rsp, rbx); // set sp to sender sp | |
0 | 792 if (UseSSE) { |
793 // float and double are returned in xmm register in SSE-mode | |
794 if (state == ftos && UseSSE >= 1) { | |
304 | 795 subptr(rsp, wordSize); |
0 | 796 fstp_s(Address(rsp, 0)); |
797 movflt(xmm0, Address(rsp, 0)); | |
304 | 798 addptr(rsp, wordSize); |
0 | 799 } else if (state == dtos && UseSSE >= 2) { |
304 | 800 subptr(rsp, 2*wordSize); |
0 | 801 fstp_d(Address(rsp, 0)); |
802 movdbl(xmm0, Address(rsp, 0)); | |
304 | 803 addptr(rsp, 2*wordSize); |
0 | 804 } |
805 } | |
806 } | |
807 | |
808 #endif /* !CC_INTERP */ | |
809 | |
810 | |
811 // Lock object | |
812 // | |
813 // Argument: rdx : Points to BasicObjectLock to be used for locking. Must | |
814 // be initialized with object to lock | |
815 void InterpreterMacroAssembler::lock_object(Register lock_reg) { | |
816 assert(lock_reg == rdx, "The argument is only for looks. It must be rdx"); | |
817 | |
818 if (UseHeavyMonitors) { | |
819 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg); | |
820 } else { | |
821 | |
822 Label done; | |
823 | |
824 const Register swap_reg = rax; // Must use rax, for cmpxchg instruction | |
825 const Register obj_reg = rcx; // Will contain the oop | |
826 | |
827 const int obj_offset = BasicObjectLock::obj_offset_in_bytes(); | |
828 const int lock_offset = BasicObjectLock::lock_offset_in_bytes (); | |
829 const int mark_offset = lock_offset + BasicLock::displaced_header_offset_in_bytes(); | |
830 | |
831 Label slow_case; | |
832 | |
833 // Load object pointer into obj_reg %rcx | |
304 | 834 movptr(obj_reg, Address(lock_reg, obj_offset)); |
0 | 835 |
836 if (UseBiasedLocking) { | |
837 // Note: we use noreg for the temporary register since it's hard | |
838 // to come up with a free register on all incoming code paths | |
839 biased_locking_enter(lock_reg, obj_reg, swap_reg, noreg, false, done, &slow_case); | |
840 } | |
841 | |
842 // Load immediate 1 into swap_reg %rax, | |
304 | 843 movptr(swap_reg, (int32_t)1); |
0 | 844 |
845 // Load (object->mark() | 1) into swap_reg %rax, | |
304 | 846 orptr(swap_reg, Address(obj_reg, 0)); |
0 | 847 |
848 // Save (object->mark() | 1) into BasicLock's displaced header | |
304 | 849 movptr(Address(lock_reg, mark_offset), swap_reg); |
0 | 850 |
851 assert(lock_offset == 0, "displached header must be first word in BasicObjectLock"); | |
852 if (os::is_MP()) { | |
853 lock(); | |
854 } | |
304 | 855 cmpxchgptr(lock_reg, Address(obj_reg, 0)); |
0 | 856 if (PrintBiasedLockingStatistics) { |
857 cond_inc32(Assembler::zero, | |
858 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); | |
859 } | |
860 jcc(Assembler::zero, done); | |
861 | |
862 // Test if the oopMark is an obvious stack pointer, i.e., | |
863 // 1) (mark & 3) == 0, and | |
864 // 2) rsp <= mark < mark + os::pagesize() | |
865 // | |
866 // These 3 tests can be done by evaluating the following | |
867 // expression: ((mark - rsp) & (3 - os::vm_page_size())), | |
868 // assuming both stack pointer and pagesize have their | |
869 // least significant 2 bits clear. | |
870 // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg | |
304 | 871 subptr(swap_reg, rsp); |
872 andptr(swap_reg, 3 - os::vm_page_size()); | |
0 | 873 |
874 // Save the test result, for recursive case, the result is zero | |
304 | 875 movptr(Address(lock_reg, mark_offset), swap_reg); |
0 | 876 |
877 if (PrintBiasedLockingStatistics) { | |
878 cond_inc32(Assembler::zero, | |
879 ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); | |
880 } | |
881 jcc(Assembler::zero, done); | |
882 | |
883 bind(slow_case); | |
884 | |
885 // Call the runtime routine for slow case | |
886 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg); | |
887 | |
888 bind(done); | |
889 } | |
890 } | |
891 | |
892 | |
893 // Unlocks an object. Used in monitorexit bytecode and remove_activation. | |
894 // | |
895 // Argument: rdx : Points to BasicObjectLock structure for lock | |
896 // Throw an IllegalMonitorException if object is not locked by current thread | |
897 // | |
898 // Uses: rax, rbx, rcx, rdx | |
899 void InterpreterMacroAssembler::unlock_object(Register lock_reg) { | |
900 assert(lock_reg == rdx, "The argument is only for looks. It must be rdx"); | |
901 | |
902 if (UseHeavyMonitors) { | |
903 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg); | |
904 } else { | |
905 Label done; | |
906 | |
907 const Register swap_reg = rax; // Must use rax, for cmpxchg instruction | |
908 const Register header_reg = rbx; // Will contain the old oopMark | |
909 const Register obj_reg = rcx; // Will contain the oop | |
910 | |
911 save_bcp(); // Save in case of exception | |
912 | |
913 // Convert from BasicObjectLock structure to object and BasicLock structure | |
914 // Store the BasicLock address into %rax, | |
304 | 915 lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes())); |
0 | 916 |
917 // Load oop into obj_reg(%rcx) | |
304 | 918 movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes ())); |
0 | 919 |
920 // Free entry | |
512
db4caa99ef11
6787106: Hotspot 32 bit build fails on platforms having different definitions for intptr_t & int32_t
xlu
parents:
337
diff
changeset
|
921 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), NULL_WORD); |
0 | 922 |
923 if (UseBiasedLocking) { | |
924 biased_locking_exit(obj_reg, header_reg, done); | |
925 } | |
926 | |
927 // Load the old header from BasicLock structure | |
304 | 928 movptr(header_reg, Address(swap_reg, BasicLock::displaced_header_offset_in_bytes())); |
0 | 929 |
930 // Test for recursion | |
304 | 931 testptr(header_reg, header_reg); |
0 | 932 |
933 // zero for recursive case | |
934 jcc(Assembler::zero, done); | |
935 | |
936 // Atomic swap back the old header | |
937 if (os::is_MP()) lock(); | |
304 | 938 cmpxchgptr(header_reg, Address(obj_reg, 0)); |
0 | 939 |
940 // zero for recursive case | |
941 jcc(Assembler::zero, done); | |
942 | |
943 // Call the runtime routine for slow case. | |
304 | 944 movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), obj_reg); // restore obj |
0 | 945 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg); |
946 | |
947 bind(done); | |
948 | |
949 restore_bcp(); | |
950 } | |
951 } | |
952 | |
953 | |
954 #ifndef CC_INTERP | |
955 | |
956 // Test ImethodDataPtr. If it is null, continue at the specified label | |
957 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, Label& zero_continue) { | |
958 assert(ProfileInterpreter, "must be profiling interpreter"); | |
304 | 959 movptr(mdp, Address(rbp, frame::interpreter_frame_mdx_offset * wordSize)); |
960 testptr(mdp, mdp); | |
0 | 961 jcc(Assembler::zero, zero_continue); |
962 } | |
963 | |
964 | |
965 // Set the method data pointer for the current bcp. | |
966 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { | |
967 assert(ProfileInterpreter, "must be profiling interpreter"); | |
968 Label zero_continue; | |
304 | 969 push(rax); |
970 push(rbx); | |
0 | 971 |
972 get_method(rbx); | |
973 // Test MDO to avoid the call if it is NULL. | |
304 | 974 movptr(rax, Address(rbx, in_bytes(methodOopDesc::method_data_offset()))); |
975 testptr(rax, rax); | |
0 | 976 jcc(Assembler::zero, zero_continue); |
977 | |
978 // rbx,: method | |
979 // rsi: bcp | |
980 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, rsi); | |
981 // rax,: mdi | |
982 | |
304 | 983 movptr(rbx, Address(rbx, in_bytes(methodOopDesc::method_data_offset()))); |
984 testptr(rbx, rbx); | |
0 | 985 jcc(Assembler::zero, zero_continue); |
304 | 986 addptr(rbx, in_bytes(methodDataOopDesc::data_offset())); |
987 addptr(rbx, rax); | |
988 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rbx); | |
0 | 989 |
990 bind(zero_continue); | |
304 | 991 pop(rbx); |
992 pop(rax); | |
0 | 993 } |
994 | |
995 void InterpreterMacroAssembler::verify_method_data_pointer() { | |
996 assert(ProfileInterpreter, "must be profiling interpreter"); | |
997 #ifdef ASSERT | |
998 Label verify_continue; | |
304 | 999 push(rax); |
1000 push(rbx); | |
1001 push(rcx); | |
1002 push(rdx); | |
0 | 1003 test_method_data_pointer(rcx, verify_continue); // If mdp is zero, continue |
1004 get_method(rbx); | |
1005 | |
1006 // If the mdp is valid, it will point to a DataLayout header which is | |
1007 // consistent with the bcp. The converse is highly probable also. | |
622
56aae7be60d4
6812678: macro assembler needs delayed binding of a few constants (for 6655638)
jrose
parents:
533
diff
changeset
|
1008 load_unsigned_short(rdx, Address(rcx, in_bytes(DataLayout::bci_offset()))); |
304 | 1009 addptr(rdx, Address(rbx, methodOopDesc::const_offset())); |
1010 lea(rdx, Address(rdx, constMethodOopDesc::codes_offset())); | |
1011 cmpptr(rdx, rsi); | |
0 | 1012 jcc(Assembler::equal, verify_continue); |
1013 // rbx,: method | |
1014 // rsi: bcp | |
1015 // rcx: mdp | |
1016 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), rbx, rsi, rcx); | |
1017 bind(verify_continue); | |
304 | 1018 pop(rdx); |
1019 pop(rcx); | |
1020 pop(rbx); | |
1021 pop(rax); | |
0 | 1022 #endif // ASSERT |
1023 } | |
1024 | |
1025 | |
1026 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, int constant, Register value) { | |
304 | 1027 // %%% this seems to be used to store counter data which is surely 32bits |
1028 // however 64bit side stores 64 bits which seems wrong | |
0 | 1029 assert(ProfileInterpreter, "must be profiling interpreter"); |
1030 Address data(mdp_in, constant); | |
304 | 1031 movptr(data, value); |
0 | 1032 } |
1033 | |
1034 | |
1035 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, | |
1036 int constant, | |
1037 bool decrement) { | |
1038 // Counter address | |
1039 Address data(mdp_in, constant); | |
1040 | |
1041 increment_mdp_data_at(data, decrement); | |
1042 } | |
1043 | |
1044 | |
1045 void InterpreterMacroAssembler::increment_mdp_data_at(Address data, | |
1046 bool decrement) { | |
1047 | |
1048 assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" ); | |
1049 assert(ProfileInterpreter, "must be profiling interpreter"); | |
1050 | |
304 | 1051 // %%% 64bit treats this as 64 bit which seems unlikely |
0 | 1052 if (decrement) { |
1053 // Decrement the register. Set condition codes. | |
1054 addl(data, -DataLayout::counter_increment); | |
1055 // If the decrement causes the counter to overflow, stay negative | |
1056 Label L; | |
1057 jcc(Assembler::negative, L); | |
1058 addl(data, DataLayout::counter_increment); | |
1059 bind(L); | |
1060 } else { | |
1061 assert(DataLayout::counter_increment == 1, | |
1062 "flow-free idiom only works with 1"); | |
1063 // Increment the register. Set carry flag. | |
1064 addl(data, DataLayout::counter_increment); | |
1065 // If the increment causes the counter to overflow, pull back by 1. | |
1066 sbbl(data, 0); | |
1067 } | |
1068 } | |
1069 | |
1070 | |
1071 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, | |
1072 Register reg, | |
1073 int constant, | |
1074 bool decrement) { | |
1075 Address data(mdp_in, reg, Address::times_1, constant); | |
1076 | |
1077 increment_mdp_data_at(data, decrement); | |
1078 } | |
1079 | |
1080 | |
1081 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, int flag_byte_constant) { | |
1082 assert(ProfileInterpreter, "must be profiling interpreter"); | |
1083 int header_offset = in_bytes(DataLayout::header_offset()); | |
1084 int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant); | |
1085 // Set the flag | |
1086 orl(Address(mdp_in, header_offset), header_bits); | |
1087 } | |
1088 | |
1089 | |
1090 | |
1091 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, | |
1092 int offset, | |
1093 Register value, | |
1094 Register test_value_out, | |
1095 Label& not_equal_continue) { | |
1096 assert(ProfileInterpreter, "must be profiling interpreter"); | |
1097 if (test_value_out == noreg) { | |
304 | 1098 cmpptr(value, Address(mdp_in, offset)); |
0 | 1099 } else { |
1100 // Put the test value into a register, so caller can use it: | |
304 | 1101 movptr(test_value_out, Address(mdp_in, offset)); |
1102 cmpptr(test_value_out, value); | |
0 | 1103 } |
1104 jcc(Assembler::notEqual, not_equal_continue); | |
1105 } | |
1106 | |
1107 | |
1108 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, int offset_of_disp) { | |
1109 assert(ProfileInterpreter, "must be profiling interpreter"); | |
1110 Address disp_address(mdp_in, offset_of_disp); | |
304 | 1111 addptr(mdp_in,disp_address); |
1112 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); | |
0 | 1113 } |
1114 | |
1115 | |
1116 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, Register reg, int offset_of_disp) { | |
1117 assert(ProfileInterpreter, "must be profiling interpreter"); | |
1118 Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp); | |
304 | 1119 addptr(mdp_in, disp_address); |
1120 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); | |
0 | 1121 } |
1122 | |
1123 | |
1124 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, int constant) { | |
1125 assert(ProfileInterpreter, "must be profiling interpreter"); | |
304 | 1126 addptr(mdp_in, constant); |
1127 movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); | |
0 | 1128 } |
1129 | |
1130 | |
1131 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { | |
1132 assert(ProfileInterpreter, "must be profiling interpreter"); | |
304 | 1133 push(return_bci); // save/restore across call_VM |
0 | 1134 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), return_bci); |
304 | 1135 pop(return_bci); |
0 | 1136 } |
1137 | |
1138 | |
1139 void InterpreterMacroAssembler::profile_taken_branch(Register mdp, Register bumped_count) { | |
1140 if (ProfileInterpreter) { | |
1141 Label profile_continue; | |
1142 | |
1143 // If no method data exists, go to profile_continue. | |
1144 // Otherwise, assign to mdp | |
1145 test_method_data_pointer(mdp, profile_continue); | |
1146 | |
1147 // We are taking a branch. Increment the taken count. | |
1148 // We inline increment_mdp_data_at to return bumped_count in a register | |
1149 //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); | |
1150 Address data(mdp, in_bytes(JumpData::taken_offset())); | |
304 | 1151 |
1152 // %%% 64bit treats these cells as 64 bit but they seem to be 32 bit | |
0 | 1153 movl(bumped_count,data); |
1154 assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" ); | |
1155 addl(bumped_count, DataLayout::counter_increment); | |
1156 sbbl(bumped_count, 0); | |
1157 movl(data,bumped_count); // Store back out | |
1158 | |
1159 // The method data pointer needs to be updated to reflect the new target. | |
1160 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); | |
1161 bind (profile_continue); | |
1162 } | |
1163 } | |
1164 | |
1165 | |
1166 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { | |
1167 if (ProfileInterpreter) { | |
1168 Label profile_continue; | |
1169 | |
1170 // If no method data exists, go to profile_continue. | |
1171 test_method_data_pointer(mdp, profile_continue); | |
1172 | |
1173 // We are taking a branch. Increment the not taken count. | |
1174 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); | |
1175 | |
1176 // The method data pointer needs to be updated to correspond to the next bytecode | |
1177 update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); | |
1178 bind (profile_continue); | |
1179 } | |
1180 } | |
1181 | |
1182 | |
1183 void InterpreterMacroAssembler::profile_call(Register mdp) { | |
1184 if (ProfileInterpreter) { | |
1185 Label profile_continue; | |
1186 | |
1187 // If no method data exists, go to profile_continue. | |
1188 test_method_data_pointer(mdp, profile_continue); | |
1189 | |
1190 // We are making a call. Increment the count. | |
1191 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); | |
1192 | |
1193 // The method data pointer needs to be updated to reflect the new target. | |
1194 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); | |
1195 bind (profile_continue); | |
1196 } | |
1197 } | |
1198 | |
1199 | |
1200 void InterpreterMacroAssembler::profile_final_call(Register mdp) { | |
1201 if (ProfileInterpreter) { | |
1202 Label profile_continue; | |
1203 | |
1204 // If no method data exists, go to profile_continue. | |
1205 test_method_data_pointer(mdp, profile_continue); | |
1206 | |
1207 // We are making a call. Increment the count. | |
1208 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); | |
1209 | |
1210 // The method data pointer needs to be updated to reflect the new target. | |
1211 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); | |
1212 bind (profile_continue); | |
1213 } | |
1214 } | |
1215 | |
1216 | |
1217 void InterpreterMacroAssembler::profile_virtual_call(Register receiver, Register mdp, Register reg2) { | |
1218 if (ProfileInterpreter) { | |
1219 Label profile_continue; | |
1220 | |
1221 // If no method data exists, go to profile_continue. | |
1222 test_method_data_pointer(mdp, profile_continue); | |
1223 | |
1224 // We are making a call. Increment the count. | |
1225 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); | |
1226 | |
1227 // Record the receiver type. | |
1228 record_klass_in_profile(receiver, mdp, reg2); | |
1229 | |
1230 // The method data pointer needs to be updated to reflect the new target. | |
1231 update_mdp_by_constant(mdp, | |
1232 in_bytes(VirtualCallData:: | |
1233 virtual_call_data_size())); | |
1234 bind(profile_continue); | |
1235 } | |
1236 } | |
1237 | |
1238 | |
1239 void InterpreterMacroAssembler::record_klass_in_profile_helper( | |
1240 Register receiver, Register mdp, | |
1241 Register reg2, | |
1242 int start_row, Label& done) { | |
1243 int last_row = VirtualCallData::row_limit() - 1; | |
1244 assert(start_row <= last_row, "must be work left to do"); | |
1245 // Test this row for both the receiver and for null. | |
1246 // Take any of three different outcomes: | |
1247 // 1. found receiver => increment count and goto done | |
1248 // 2. found null => keep looking for case 1, maybe allocate this cell | |
1249 // 3. found something else => keep looking for cases 1 and 2 | |
1250 // Case 3 is handled by a recursive call. | |
1251 for (int row = start_row; row <= last_row; row++) { | |
1252 Label next_test; | |
1253 bool test_for_null_also = (row == start_row); | |
1254 | |
1255 // See if the receiver is receiver[n]. | |
1256 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row)); | |
1257 test_mdp_data_at(mdp, recvr_offset, receiver, | |
1258 (test_for_null_also ? reg2 : noreg), | |
1259 next_test); | |
1260 // (Reg2 now contains the receiver from the CallData.) | |
1261 | |
1262 // The receiver is receiver[n]. Increment count[n]. | |
1263 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row)); | |
1264 increment_mdp_data_at(mdp, count_offset); | |
1265 jmp(done); | |
1266 bind(next_test); | |
1267 | |
1268 if (row == start_row) { | |
1269 // Failed the equality check on receiver[n]... Test for null. | |
304 | 1270 testptr(reg2, reg2); |
0 | 1271 if (start_row == last_row) { |
1272 // The only thing left to do is handle the null case. | |
1273 jcc(Assembler::notZero, done); | |
1274 break; | |
1275 } | |
1276 // Since null is rare, make it be the branch-taken case. | |
1277 Label found_null; | |
1278 jcc(Assembler::zero, found_null); | |
1279 | |
1280 // Put all the "Case 3" tests here. | |
1281 record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done); | |
1282 | |
1283 // Found a null. Keep searching for a matching receiver, | |
1284 // but remember that this is an empty (unused) slot. | |
1285 bind(found_null); | |
1286 } | |
1287 } | |
1288 | |
1289 // In the fall-through case, we found no matching receiver, but we | |
1290 // observed the receiver[start_row] is NULL. | |
1291 | |
1292 // Fill in the receiver field and increment the count. | |
1293 int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row)); | |
1294 set_mdp_data_at(mdp, recvr_offset, receiver); | |
1295 int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row)); | |
304 | 1296 movptr(reg2, (int32_t)DataLayout::counter_increment); |
0 | 1297 set_mdp_data_at(mdp, count_offset, reg2); |
1298 jmp(done); | |
1299 } | |
1300 | |
1301 void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, | |
1302 Register mdp, | |
1303 Register reg2) { | |
1304 assert(ProfileInterpreter, "must be profiling"); | |
1305 Label done; | |
1306 | |
1307 record_klass_in_profile_helper(receiver, mdp, reg2, 0, done); | |
1308 | |
1309 bind (done); | |
1310 } | |
1311 | |
1312 void InterpreterMacroAssembler::profile_ret(Register return_bci, Register mdp) { | |
1313 if (ProfileInterpreter) { | |
1314 Label profile_continue; | |
1315 uint row; | |
1316 | |
1317 // If no method data exists, go to profile_continue. | |
1318 test_method_data_pointer(mdp, profile_continue); | |
1319 | |
1320 // Update the total ret count. | |
1321 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); | |
1322 | |
1323 for (row = 0; row < RetData::row_limit(); row++) { | |
1324 Label next_test; | |
1325 | |
1326 // See if return_bci is equal to bci[n]: | |
1327 test_mdp_data_at(mdp, in_bytes(RetData::bci_offset(row)), return_bci, | |
1328 noreg, next_test); | |
1329 | |
1330 // return_bci is equal to bci[n]. Increment the count. | |
1331 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); | |
1332 | |
1333 // The method data pointer needs to be updated to reflect the new target. | |
1334 update_mdp_by_offset(mdp, in_bytes(RetData::bci_displacement_offset(row))); | |
1335 jmp(profile_continue); | |
1336 bind(next_test); | |
1337 } | |
1338 | |
1339 update_mdp_for_ret(return_bci); | |
1340 | |
1341 bind (profile_continue); | |
1342 } | |
1343 } | |
1344 | |
1345 | |
1346 void InterpreterMacroAssembler::profile_null_seen(Register mdp) { | |
1347 if (ProfileInterpreter) { | |
1348 Label profile_continue; | |
1349 | |
1350 // If no method data exists, go to profile_continue. | |
1351 test_method_data_pointer(mdp, profile_continue); | |
1352 | |
1353 // The method data pointer needs to be updated. | |
1354 int mdp_delta = in_bytes(BitData::bit_data_size()); | |
1355 if (TypeProfileCasts) { | |
1356 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); | |
1357 } | |
1358 update_mdp_by_constant(mdp, mdp_delta); | |
1359 | |
1360 bind (profile_continue); | |
1361 } | |
1362 } | |
1363 | |
1364 | |
1365 void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) { | |
1366 if (ProfileInterpreter && TypeProfileCasts) { | |
1367 Label profile_continue; | |
1368 | |
1369 // If no method data exists, go to profile_continue. | |
1370 test_method_data_pointer(mdp, profile_continue); | |
1371 | |
1372 int count_offset = in_bytes(CounterData::count_offset()); | |
1373 // Back up the address, since we have already bumped the mdp. | |
1374 count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); | |
1375 | |
1376 // *Decrement* the counter. We expect to see zero or small negatives. | |
1377 increment_mdp_data_at(mdp, count_offset, true); | |
1378 | |
1379 bind (profile_continue); | |
1380 } | |
1381 } | |
1382 | |
1383 | |
1384 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) | |
1385 { | |
1386 if (ProfileInterpreter) { | |
1387 Label profile_continue; | |
1388 | |
1389 // If no method data exists, go to profile_continue. | |
1390 test_method_data_pointer(mdp, profile_continue); | |
1391 | |
1392 // The method data pointer needs to be updated. | |
1393 int mdp_delta = in_bytes(BitData::bit_data_size()); | |
1394 if (TypeProfileCasts) { | |
1395 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); | |
1396 | |
1397 // Record the object type. | |
1398 record_klass_in_profile(klass, mdp, reg2); | |
1399 assert(reg2 == rdi, "we know how to fix this blown reg"); | |
1400 restore_locals(); // Restore EDI | |
1401 } | |
1402 update_mdp_by_constant(mdp, mdp_delta); | |
1403 | |
1404 bind(profile_continue); | |
1405 } | |
1406 } | |
1407 | |
1408 | |
1409 void InterpreterMacroAssembler::profile_switch_default(Register mdp) { | |
1410 if (ProfileInterpreter) { | |
1411 Label profile_continue; | |
1412 | |
1413 // If no method data exists, go to profile_continue. | |
1414 test_method_data_pointer(mdp, profile_continue); | |
1415 | |
1416 // Update the default case count | |
1417 increment_mdp_data_at(mdp, in_bytes(MultiBranchData::default_count_offset())); | |
1418 | |
1419 // The method data pointer needs to be updated. | |
1420 update_mdp_by_offset(mdp, in_bytes(MultiBranchData::default_displacement_offset())); | |
1421 | |
1422 bind (profile_continue); | |
1423 } | |
1424 } | |
1425 | |
1426 | |
1427 void InterpreterMacroAssembler::profile_switch_case(Register index, Register mdp, Register reg2) { | |
1428 if (ProfileInterpreter) { | |
1429 Label profile_continue; | |
1430 | |
1431 // If no method data exists, go to profile_continue. | |
1432 test_method_data_pointer(mdp, profile_continue); | |
1433 | |
1434 // Build the base (index * per_case_size_in_bytes()) + case_array_offset_in_bytes() | |
304 | 1435 movptr(reg2, (int32_t)in_bytes(MultiBranchData::per_case_size())); |
1436 // index is positive and so should have correct value if this code were | |
1437 // used on 64bits | |
1438 imulptr(index, reg2); | |
1439 addptr(index, in_bytes(MultiBranchData::case_array_offset())); | |
0 | 1440 |
1441 // Update the case count | |
1442 increment_mdp_data_at(mdp, index, in_bytes(MultiBranchData::relative_count_offset())); | |
1443 | |
1444 // The method data pointer needs to be updated. | |
1445 update_mdp_by_offset(mdp, index, in_bytes(MultiBranchData::relative_displacement_offset())); | |
1446 | |
1447 bind (profile_continue); | |
1448 } | |
1449 } | |
1450 | |
1451 #endif // !CC_INTERP | |
1452 | |
1453 | |
1454 | |
1455 void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { | |
1456 if (state == atos) MacroAssembler::verify_oop(reg); | |
1457 } | |
1458 | |
1459 | |
1460 #ifndef CC_INTERP | |
1461 void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { | |
1462 if (state == ftos || state == dtos) MacroAssembler::verify_FPU(stack_depth); | |
1463 } | |
1464 | |
1465 #endif /* CC_INTERP */ | |
1466 | |
1467 | |
1468 void InterpreterMacroAssembler::notify_method_entry() { | |
1469 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to | |
1470 // track stack depth. If it is possible to enter interp_only_mode we add | |
1471 // the code to check if the event should be sent. | |
1472 if (JvmtiExport::can_post_interpreter_events()) { | |
1473 Label L; | |
1474 get_thread(rcx); | |
1475 movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset())); | |
1476 testl(rcx,rcx); | |
1477 jcc(Assembler::zero, L); | |
1478 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry)); | |
1479 bind(L); | |
1480 } | |
1481 | |
1482 { | |
1483 SkipIfEqual skip_if(this, &DTraceMethodProbes, 0); | |
1484 get_thread(rcx); | |
1485 get_method(rbx); | |
1486 call_VM_leaf( | |
1487 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), rcx, rbx); | |
1488 } | |
610
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1489 |
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1490 // RedefineClasses() tracing support for obsolete method entry |
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1491 if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) { |
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1492 get_thread(rcx); |
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1493 get_method(rbx); |
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1494 call_VM_leaf( |
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1495 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), |
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1496 rcx, rbx); |
70998f2e05ef
6805864: 4/3 Problem with jvmti->redefineClasses: some methods don't get redefined
dcubed
parents:
337
diff
changeset
|
1497 } |
0 | 1498 } |
1499 | |
1500 | |
1501 void InterpreterMacroAssembler::notify_method_exit( | |
1502 TosState state, NotifyMethodExitMode mode) { | |
1503 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to | |
1504 // track stack depth. If it is possible to enter interp_only_mode we add | |
1505 // the code to check if the event should be sent. | |
1506 if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { | |
1507 Label L; | |
1508 // Note: frame::interpreter_frame_result has a dependency on how the | |
1509 // method result is saved across the call to post_method_exit. If this | |
1510 // is changed then the interpreter_frame_result implementation will | |
1511 // need to be updated too. | |
1512 | |
1513 // For c++ interpreter the result is always stored at a known location in the frame | |
1514 // template interpreter will leave it on the top of the stack. | |
1515 NOT_CC_INTERP(push(state);) | |
1516 get_thread(rcx); | |
1517 movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset())); | |
1518 testl(rcx,rcx); | |
1519 jcc(Assembler::zero, L); | |
1520 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); | |
1521 bind(L); | |
1522 NOT_CC_INTERP(pop(state);) | |
1523 } | |
1524 | |
1525 { | |
1526 SkipIfEqual skip_if(this, &DTraceMethodProbes, 0); | |
304 | 1527 NOT_CC_INTERP(push(state)); |
0 | 1528 get_thread(rbx); |
1529 get_method(rcx); | |
1530 call_VM_leaf( | |
1531 CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), | |
1532 rbx, rcx); | |
304 | 1533 NOT_CC_INTERP(pop(state)); |
0 | 1534 } |
1535 } |