Mercurial > hg > truffle
annotate src/share/vm/opto/output.cpp @ 605:98cb887364d3
6810672: Comment typos
Summary: I have collected some typos I have found while looking at the code.
Reviewed-by: kvn, never
| author | twisti |
|---|---|
| date | Fri, 27 Feb 2009 13:27:09 -0800 |
| parents | 424f9bfe6b96 |
| children | 4ec1257180ec |
| rev | line source |
|---|---|
| 0 | 1 /* |
| 196 | 2 * Copyright 1998-2008 Sun Microsystems, Inc. All Rights Reserved. |
| 0 | 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| 4 * | |
| 5 * This code is free software; you can redistribute it and/or modify it | |
| 6 * under the terms of the GNU General Public License version 2 only, as | |
| 7 * published by the Free Software Foundation. | |
| 8 * | |
| 9 * This code is distributed in the hope that it will be useful, but WITHOUT | |
| 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| 12 * version 2 for more details (a copy is included in the LICENSE file that | |
| 13 * accompanied this code). | |
| 14 * | |
| 15 * You should have received a copy of the GNU General Public License version | |
| 16 * 2 along with this work; if not, write to the Free Software Foundation, | |
| 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
| 18 * | |
| 19 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, | |
| 20 * CA 95054 USA or visit www.sun.com if you need additional information or | |
| 21 * have any questions. | |
| 22 * | |
| 23 */ | |
| 24 | |
| 25 #include "incls/_precompiled.incl" | |
| 26 #include "incls/_output.cpp.incl" | |
| 27 | |
| 28 extern uint size_java_to_interp(); | |
| 29 extern uint reloc_java_to_interp(); | |
| 30 extern uint size_exception_handler(); | |
| 31 extern uint size_deopt_handler(); | |
| 32 | |
| 33 #ifndef PRODUCT | |
| 34 #define DEBUG_ARG(x) , x | |
| 35 #else | |
| 36 #define DEBUG_ARG(x) | |
| 37 #endif | |
| 38 | |
| 39 extern int emit_exception_handler(CodeBuffer &cbuf); | |
| 40 extern int emit_deopt_handler(CodeBuffer &cbuf); | |
| 41 | |
| 42 //------------------------------Output----------------------------------------- | |
| 43 // Convert Nodes to instruction bits and pass off to the VM | |
| 44 void Compile::Output() { | |
| 45 // RootNode goes | |
| 46 assert( _cfg->_broot->_nodes.size() == 0, "" ); | |
| 47 | |
| 48 // Initialize the space for the BufferBlob used to find and verify | |
| 49 // instruction size in MachNode::emit_size() | |
| 50 init_scratch_buffer_blob(); | |
| 163 | 51 if (failing()) return; // Out of memory |
| 0 | 52 |
| 53 // Make sure I can find the Start Node | |
| 54 Block_Array& bbs = _cfg->_bbs; | |
| 55 Block *entry = _cfg->_blocks[1]; | |
| 56 Block *broot = _cfg->_broot; | |
| 57 | |
| 58 const StartNode *start = entry->_nodes[0]->as_Start(); | |
| 59 | |
| 60 // Replace StartNode with prolog | |
| 61 MachPrologNode *prolog = new (this) MachPrologNode(); | |
| 62 entry->_nodes.map( 0, prolog ); | |
| 63 bbs.map( prolog->_idx, entry ); | |
| 64 bbs.map( start->_idx, NULL ); // start is no longer in any block | |
| 65 | |
| 66 // Virtual methods need an unverified entry point | |
| 67 | |
| 68 if( is_osr_compilation() ) { | |
| 69 if( PoisonOSREntry ) { | |
| 70 // TODO: Should use a ShouldNotReachHereNode... | |
| 71 _cfg->insert( broot, 0, new (this) MachBreakpointNode() ); | |
| 72 } | |
| 73 } else { | |
| 74 if( _method && !_method->flags().is_static() ) { | |
| 75 // Insert unvalidated entry point | |
| 76 _cfg->insert( broot, 0, new (this) MachUEPNode() ); | |
| 77 } | |
| 78 | |
| 79 } | |
| 80 | |
| 81 | |
| 82 // Break before main entry point | |
| 83 if( (_method && _method->break_at_execute()) | |
| 84 #ifndef PRODUCT | |
| 85 ||(OptoBreakpoint && is_method_compilation()) | |
| 86 ||(OptoBreakpointOSR && is_osr_compilation()) | |
| 87 ||(OptoBreakpointC2R && !_method) | |
| 88 #endif | |
| 89 ) { | |
| 90 // checking for _method means that OptoBreakpoint does not apply to | |
| 91 // runtime stubs or frame converters | |
| 92 _cfg->insert( entry, 1, new (this) MachBreakpointNode() ); | |
| 93 } | |
| 94 | |
| 95 // Insert epilogs before every return | |
| 96 for( uint i=0; i<_cfg->_num_blocks; i++ ) { | |
| 97 Block *b = _cfg->_blocks[i]; | |
| 98 if( !b->is_connector() && b->non_connector_successor(0) == _cfg->_broot ) { // Found a program exit point? | |
| 99 Node *m = b->end(); | |
| 100 if( m->is_Mach() && m->as_Mach()->ideal_Opcode() != Op_Halt ) { | |
| 101 MachEpilogNode *epilog = new (this) MachEpilogNode(m->as_Mach()->ideal_Opcode() == Op_Return); | |
| 102 b->add_inst( epilog ); | |
| 103 bbs.map(epilog->_idx, b); | |
| 104 //_regalloc->set_bad(epilog->_idx); // Already initialized this way. | |
| 105 } | |
| 106 } | |
| 107 } | |
| 108 | |
| 109 # ifdef ENABLE_ZAP_DEAD_LOCALS | |
| 110 if ( ZapDeadCompiledLocals ) Insert_zap_nodes(); | |
| 111 # endif | |
| 112 | |
| 113 ScheduleAndBundle(); | |
| 114 | |
| 115 #ifndef PRODUCT | |
| 116 if (trace_opto_output()) { | |
| 117 tty->print("\n---- After ScheduleAndBundle ----\n"); | |
| 118 for (uint i = 0; i < _cfg->_num_blocks; i++) { | |
| 119 tty->print("\nBB#%03d:\n", i); | |
| 120 Block *bb = _cfg->_blocks[i]; | |
| 121 for (uint j = 0; j < bb->_nodes.size(); j++) { | |
| 122 Node *n = bb->_nodes[j]; | |
| 123 OptoReg::Name reg = _regalloc->get_reg_first(n); | |
| 124 tty->print(" %-6s ", reg >= 0 && reg < REG_COUNT ? Matcher::regName[reg] : ""); | |
| 125 n->dump(); | |
| 126 } | |
| 127 } | |
| 128 } | |
| 129 #endif | |
| 130 | |
| 131 if (failing()) return; | |
| 132 | |
| 133 BuildOopMaps(); | |
| 134 | |
| 135 if (failing()) return; | |
| 136 | |
| 137 Fill_buffer(); | |
| 138 } | |
| 139 | |
| 140 bool Compile::need_stack_bang(int frame_size_in_bytes) const { | |
| 141 // Determine if we need to generate a stack overflow check. | |
| 142 // Do it if the method is not a stub function and | |
| 143 // has java calls or has frame size > vm_page_size/8. | |
| 144 return (stub_function() == NULL && | |
| 145 (has_java_calls() || frame_size_in_bytes > os::vm_page_size()>>3)); | |
| 146 } | |
| 147 | |
| 148 bool Compile::need_register_stack_bang() const { | |
| 149 // Determine if we need to generate a register stack overflow check. | |
| 150 // This is only used on architectures which have split register | |
| 151 // and memory stacks (ie. IA64). | |
| 152 // Bang if the method is not a stub function and has java calls | |
| 153 return (stub_function() == NULL && has_java_calls()); | |
| 154 } | |
| 155 | |
| 156 # ifdef ENABLE_ZAP_DEAD_LOCALS | |
| 157 | |
| 158 | |
| 159 // In order to catch compiler oop-map bugs, we have implemented | |
| 160 // a debugging mode called ZapDeadCompilerLocals. | |
| 161 // This mode causes the compiler to insert a call to a runtime routine, | |
| 162 // "zap_dead_locals", right before each place in compiled code | |
| 163 // that could potentially be a gc-point (i.e., a safepoint or oop map point). | |
| 164 // The runtime routine checks that locations mapped as oops are really | |
| 165 // oops, that locations mapped as values do not look like oops, | |
| 166 // and that locations mapped as dead are not used later | |
| 167 // (by zapping them to an invalid address). | |
| 168 | |
| 169 int Compile::_CompiledZap_count = 0; | |
| 170 | |
| 171 void Compile::Insert_zap_nodes() { | |
| 172 bool skip = false; | |
| 173 | |
| 174 | |
| 175 // Dink with static counts because code code without the extra | |
| 176 // runtime calls is MUCH faster for debugging purposes | |
| 177 | |
| 178 if ( CompileZapFirst == 0 ) ; // nothing special | |
| 179 else if ( CompileZapFirst > CompiledZap_count() ) skip = true; | |
| 180 else if ( CompileZapFirst == CompiledZap_count() ) | |
| 181 warning("starting zap compilation after skipping"); | |
| 182 | |
| 183 if ( CompileZapLast == -1 ) ; // nothing special | |
| 184 else if ( CompileZapLast < CompiledZap_count() ) skip = true; | |
| 185 else if ( CompileZapLast == CompiledZap_count() ) | |
| 186 warning("about to compile last zap"); | |
| 187 | |
| 188 ++_CompiledZap_count; // counts skipped zaps, too | |
| 189 | |
| 190 if ( skip ) return; | |
| 191 | |
| 192 | |
| 193 if ( _method == NULL ) | |
| 194 return; // no safepoints/oopmaps emitted for calls in stubs,so we don't care | |
| 195 | |
| 196 // Insert call to zap runtime stub before every node with an oop map | |
| 197 for( uint i=0; i<_cfg->_num_blocks; i++ ) { | |
| 198 Block *b = _cfg->_blocks[i]; | |
| 199 for ( uint j = 0; j < b->_nodes.size(); ++j ) { | |
| 200 Node *n = b->_nodes[j]; | |
| 201 | |
| 202 // Determining if we should insert a zap-a-lot node in output. | |
| 203 // We do that for all nodes that has oopmap info, except for calls | |
| 204 // to allocation. Calls to allocation passes in the old top-of-eden pointer | |
| 205 // and expect the C code to reset it. Hence, there can be no safepoints between | |
| 206 // the inlined-allocation and the call to new_Java, etc. | |
| 207 // We also cannot zap monitor calls, as they must hold the microlock | |
| 208 // during the call to Zap, which also wants to grab the microlock. | |
| 209 bool insert = n->is_MachSafePoint() && (n->as_MachSafePoint()->oop_map() != NULL); | |
| 210 if ( insert ) { // it is MachSafePoint | |
| 211 if ( !n->is_MachCall() ) { | |
| 212 insert = false; | |
| 213 } else if ( n->is_MachCall() ) { | |
| 214 MachCallNode* call = n->as_MachCall(); | |
| 215 if (call->entry_point() == OptoRuntime::new_instance_Java() || | |
| 216 call->entry_point() == OptoRuntime::new_array_Java() || | |
| 217 call->entry_point() == OptoRuntime::multianewarray2_Java() || | |
| 218 call->entry_point() == OptoRuntime::multianewarray3_Java() || | |
| 219 call->entry_point() == OptoRuntime::multianewarray4_Java() || | |
| 220 call->entry_point() == OptoRuntime::multianewarray5_Java() || | |
| 221 call->entry_point() == OptoRuntime::slow_arraycopy_Java() || | |
| 222 call->entry_point() == OptoRuntime::complete_monitor_locking_Java() | |
| 223 ) { | |
| 224 insert = false; | |
| 225 } | |
| 226 } | |
| 227 if (insert) { | |
| 228 Node *zap = call_zap_node(n->as_MachSafePoint(), i); | |
| 229 b->_nodes.insert( j, zap ); | |
| 230 _cfg->_bbs.map( zap->_idx, b ); | |
| 231 ++j; | |
| 232 } | |
| 233 } | |
| 234 } | |
| 235 } | |
| 236 } | |
| 237 | |
| 238 | |
| 239 Node* Compile::call_zap_node(MachSafePointNode* node_to_check, int block_no) { | |
| 240 const TypeFunc *tf = OptoRuntime::zap_dead_locals_Type(); | |
| 241 CallStaticJavaNode* ideal_node = | |
| 242 new (this, tf->domain()->cnt()) CallStaticJavaNode( tf, | |
| 243 OptoRuntime::zap_dead_locals_stub(_method->flags().is_native()), | |
| 244 "call zap dead locals stub", 0, TypePtr::BOTTOM); | |
| 245 // We need to copy the OopMap from the site we're zapping at. | |
| 246 // We have to make a copy, because the zap site might not be | |
| 247 // a call site, and zap_dead is a call site. | |
| 248 OopMap* clone = node_to_check->oop_map()->deep_copy(); | |
| 249 | |
| 250 // Add the cloned OopMap to the zap node | |
| 251 ideal_node->set_oop_map(clone); | |
| 252 return _matcher->match_sfpt(ideal_node); | |
| 253 } | |
| 254 | |
| 255 //------------------------------is_node_getting_a_safepoint-------------------- | |
| 256 bool Compile::is_node_getting_a_safepoint( Node* n) { | |
| 257 // This code duplicates the logic prior to the call of add_safepoint | |
| 258 // below in this file. | |
| 259 if( n->is_MachSafePoint() ) return true; | |
| 260 return false; | |
| 261 } | |
| 262 | |
| 263 # endif // ENABLE_ZAP_DEAD_LOCALS | |
| 264 | |
| 265 //------------------------------compute_loop_first_inst_sizes------------------ | |
| 418 | 266 // Compute the size of first NumberOfLoopInstrToAlign instructions at the top |
| 0 | 267 // of a loop. When aligning a loop we need to provide enough instructions |
| 268 // in cpu's fetch buffer to feed decoders. The loop alignment could be | |
| 269 // avoided if we have enough instructions in fetch buffer at the head of a loop. | |
| 270 // By default, the size is set to 999999 by Block's constructor so that | |
| 271 // a loop will be aligned if the size is not reset here. | |
| 272 // | |
| 273 // Note: Mach instructions could contain several HW instructions | |
| 274 // so the size is estimated only. | |
| 275 // | |
| 276 void Compile::compute_loop_first_inst_sizes() { | |
| 277 // The next condition is used to gate the loop alignment optimization. | |
| 278 // Don't aligned a loop if there are enough instructions at the head of a loop | |
| 279 // or alignment padding is larger then MaxLoopPad. By default, MaxLoopPad | |
| 280 // is equal to OptoLoopAlignment-1 except on new Intel cpus, where it is | |
| 281 // equal to 11 bytes which is the largest address NOP instruction. | |
| 282 if( MaxLoopPad < OptoLoopAlignment-1 ) { | |
| 283 uint last_block = _cfg->_num_blocks-1; | |
| 284 for( uint i=1; i <= last_block; i++ ) { | |
| 285 Block *b = _cfg->_blocks[i]; | |
| 286 // Check the first loop's block which requires an alignment. | |
| 418 | 287 if( b->loop_alignment() > (uint)relocInfo::addr_unit() ) { |
| 0 | 288 uint sum_size = 0; |
| 289 uint inst_cnt = NumberOfLoopInstrToAlign; | |
| 418 | 290 inst_cnt = b->compute_first_inst_size(sum_size, inst_cnt, _regalloc); |
| 291 | |
| 292 // Check subsequent fallthrough blocks if the loop's first | |
| 293 // block(s) does not have enough instructions. | |
| 294 Block *nb = b; | |
| 295 while( inst_cnt > 0 && | |
| 296 i < last_block && | |
| 297 !_cfg->_blocks[i+1]->has_loop_alignment() && | |
| 298 !nb->has_successor(b) ) { | |
| 299 i++; | |
| 300 nb = _cfg->_blocks[i]; | |
| 301 inst_cnt = nb->compute_first_inst_size(sum_size, inst_cnt, _regalloc); | |
| 302 } // while( inst_cnt > 0 && i < last_block ) | |
| 303 | |
| 0 | 304 b->set_first_inst_size(sum_size); |
| 305 } // f( b->head()->is_Loop() ) | |
| 306 } // for( i <= last_block ) | |
| 307 } // if( MaxLoopPad < OptoLoopAlignment-1 ) | |
| 308 } | |
| 309 | |
| 310 //----------------------Shorten_branches--------------------------------------- | |
| 311 // The architecture description provides short branch variants for some long | |
| 312 // branch instructions. Replace eligible long branches with short branches. | |
| 313 void Compile::Shorten_branches(Label *labels, int& code_size, int& reloc_size, int& stub_size, int& const_size) { | |
| 314 | |
| 315 // fill in the nop array for bundling computations | |
| 316 MachNode *_nop_list[Bundle::_nop_count]; | |
| 317 Bundle::initialize_nops(_nop_list, this); | |
| 318 | |
| 319 // ------------------ | |
| 320 // Compute size of each block, method size, and relocation information size | |
| 321 uint *jmp_end = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks); | |
| 322 uint *blk_starts = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks+1); | |
| 323 DEBUG_ONLY( uint *jmp_target = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks); ) | |
|
415
4d9884b01ba6
6754519: don't emit flag fixup for NaN when condition being tested doesn't need it
never
parents:
331
diff
changeset
|
324 DEBUG_ONLY( uint *jmp_rule = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks); ) |
| 0 | 325 blk_starts[0] = 0; |
| 326 | |
| 327 // Initialize the sizes to 0 | |
| 328 code_size = 0; // Size in bytes of generated code | |
| 329 stub_size = 0; // Size in bytes of all stub entries | |
| 330 // Size in bytes of all relocation entries, including those in local stubs. | |
| 331 // Start with 2-bytes of reloc info for the unvalidated entry point | |
| 332 reloc_size = 1; // Number of relocation entries | |
| 333 const_size = 0; // size of fp constants in words | |
| 334 | |
| 335 // Make three passes. The first computes pessimistic blk_starts, | |
| 336 // relative jmp_end, reloc_size and const_size information. | |
| 337 // The second performs short branch substitution using the pessimistic | |
| 338 // sizing. The third inserts nops where needed. | |
| 339 | |
| 340 Node *nj; // tmp | |
| 341 | |
| 342 // Step one, perform a pessimistic sizing pass. | |
| 343 uint i; | |
| 344 uint min_offset_from_last_call = 1; // init to a positive value | |
| 345 uint nop_size = (new (this) MachNopNode())->size(_regalloc); | |
| 346 for( i=0; i<_cfg->_num_blocks; i++ ) { // For all blocks | |
| 347 Block *b = _cfg->_blocks[i]; | |
| 348 | |
| 349 // Sum all instruction sizes to compute block size | |
| 350 uint last_inst = b->_nodes.size(); | |
| 351 uint blk_size = 0; | |
| 352 for( uint j = 0; j<last_inst; j++ ) { | |
| 353 nj = b->_nodes[j]; | |
| 354 uint inst_size = nj->size(_regalloc); | |
| 355 blk_size += inst_size; | |
| 356 // Handle machine instruction nodes | |
| 357 if( nj->is_Mach() ) { | |
| 358 MachNode *mach = nj->as_Mach(); | |
| 359 blk_size += (mach->alignment_required() - 1) * relocInfo::addr_unit(); // assume worst case padding | |
| 360 reloc_size += mach->reloc(); | |
| 361 const_size += mach->const_size(); | |
| 362 if( mach->is_MachCall() ) { | |
| 363 MachCallNode *mcall = mach->as_MachCall(); | |
| 364 // This destination address is NOT PC-relative | |
| 365 | |
| 366 mcall->method_set((intptr_t)mcall->entry_point()); | |
| 367 | |
| 368 if( mcall->is_MachCallJava() && mcall->as_MachCallJava()->_method ) { | |
| 369 stub_size += size_java_to_interp(); | |
| 370 reloc_size += reloc_java_to_interp(); | |
| 371 } | |
| 372 } else if (mach->is_MachSafePoint()) { | |
| 373 // If call/safepoint are adjacent, account for possible | |
| 374 // nop to disambiguate the two safepoints. | |
| 375 if (min_offset_from_last_call == 0) { | |
| 376 blk_size += nop_size; | |
| 377 } | |
| 378 } | |
| 379 } | |
| 380 min_offset_from_last_call += inst_size; | |
| 381 // Remember end of call offset | |
| 382 if (nj->is_MachCall() && nj->as_MachCall()->is_safepoint_node()) { | |
| 383 min_offset_from_last_call = 0; | |
| 384 } | |
| 385 } | |
| 386 | |
| 387 // During short branch replacement, we store the relative (to blk_starts) | |
| 388 // end of jump in jmp_end, rather than the absolute end of jump. This | |
| 389 // is so that we do not need to recompute sizes of all nodes when we compute | |
| 390 // correct blk_starts in our next sizing pass. | |
| 391 jmp_end[i] = blk_size; | |
| 392 DEBUG_ONLY( jmp_target[i] = 0; ) | |
| 393 | |
| 394 // When the next block starts a loop, we may insert pad NOP | |
| 395 // instructions. Since we cannot know our future alignment, | |
| 396 // assume the worst. | |
| 397 if( i<_cfg->_num_blocks-1 ) { | |
| 398 Block *nb = _cfg->_blocks[i+1]; | |
| 399 int max_loop_pad = nb->code_alignment()-relocInfo::addr_unit(); | |
| 400 if( max_loop_pad > 0 ) { | |
| 401 assert(is_power_of_2(max_loop_pad+relocInfo::addr_unit()), ""); | |
| 402 blk_size += max_loop_pad; | |
| 403 } | |
| 404 } | |
| 405 | |
| 406 // Save block size; update total method size | |
| 407 blk_starts[i+1] = blk_starts[i]+blk_size; | |
| 408 } | |
| 409 | |
| 410 // Step two, replace eligible long jumps. | |
| 411 | |
| 412 // Note: this will only get the long branches within short branch | |
| 413 // range. Another pass might detect more branches that became | |
| 414 // candidates because the shortening in the first pass exposed | |
| 415 // more opportunities. Unfortunately, this would require | |
| 416 // recomputing the starting and ending positions for the blocks | |
| 417 for( i=0; i<_cfg->_num_blocks; i++ ) { | |
| 418 Block *b = _cfg->_blocks[i]; | |
| 419 | |
| 420 int j; | |
| 421 // Find the branch; ignore trailing NOPs. | |
| 422 for( j = b->_nodes.size()-1; j>=0; j-- ) { | |
| 423 nj = b->_nodes[j]; | |
| 424 if( !nj->is_Mach() || nj->as_Mach()->ideal_Opcode() != Op_Con ) | |
| 425 break; | |
| 426 } | |
| 427 | |
| 428 if (j >= 0) { | |
| 429 if( nj->is_Mach() && nj->as_Mach()->may_be_short_branch() ) { | |
| 430 MachNode *mach = nj->as_Mach(); | |
| 431 // This requires the TRUE branch target be in succs[0] | |
| 432 uint bnum = b->non_connector_successor(0)->_pre_order; | |
| 433 uintptr_t target = blk_starts[bnum]; | |
| 434 if( mach->is_pc_relative() ) { | |
| 435 int offset = target-(blk_starts[i] + jmp_end[i]); | |
|
415
4d9884b01ba6
6754519: don't emit flag fixup for NaN when condition being tested doesn't need it
never
parents:
331
diff
changeset
|
436 if (_matcher->is_short_branch_offset(mach->rule(), offset)) { |
| 0 | 437 // We've got a winner. Replace this branch. |
|
415
4d9884b01ba6
6754519: don't emit flag fixup for NaN when condition being tested doesn't need it
never
parents:
331
diff
changeset
|
438 MachNode* replacement = mach->short_branch_version(this); |
| 0 | 439 b->_nodes.map(j, replacement); |
| 222 | 440 mach->subsume_by(replacement); |
| 0 | 441 |
| 442 // Update the jmp_end size to save time in our | |
| 443 // next pass. | |
| 444 jmp_end[i] -= (mach->size(_regalloc) - replacement->size(_regalloc)); | |
| 445 DEBUG_ONLY( jmp_target[i] = bnum; ); | |
|
415
4d9884b01ba6
6754519: don't emit flag fixup for NaN when condition being tested doesn't need it
never
parents:
331
diff
changeset
|
446 DEBUG_ONLY( jmp_rule[i] = mach->rule(); ); |
| 0 | 447 } |
| 448 } else { | |
| 449 #ifndef PRODUCT | |
| 450 mach->dump(3); | |
| 451 #endif | |
| 452 Unimplemented(); | |
| 453 } | |
| 454 } | |
| 455 } | |
| 456 } | |
| 457 | |
| 458 // Compute the size of first NumberOfLoopInstrToAlign instructions at head | |
| 459 // of a loop. It is used to determine the padding for loop alignment. | |
| 460 compute_loop_first_inst_sizes(); | |
| 461 | |
| 462 // Step 3, compute the offsets of all the labels | |
| 463 uint last_call_adr = max_uint; | |
| 464 for( i=0; i<_cfg->_num_blocks; i++ ) { // For all blocks | |
| 465 // copy the offset of the beginning to the corresponding label | |
| 466 assert(labels[i].is_unused(), "cannot patch at this point"); | |
| 467 labels[i].bind_loc(blk_starts[i], CodeBuffer::SECT_INSTS); | |
| 468 | |
| 469 // insert padding for any instructions that need it | |
| 470 Block *b = _cfg->_blocks[i]; | |
| 471 uint last_inst = b->_nodes.size(); | |
| 472 uint adr = blk_starts[i]; | |
| 473 for( uint j = 0; j<last_inst; j++ ) { | |
| 474 nj = b->_nodes[j]; | |
| 475 if( nj->is_Mach() ) { | |
| 476 int padding = nj->as_Mach()->compute_padding(adr); | |
| 477 // If call/safepoint are adjacent insert a nop (5010568) | |
| 478 if (padding == 0 && nj->is_MachSafePoint() && !nj->is_MachCall() && | |
| 479 adr == last_call_adr ) { | |
| 480 padding = nop_size; | |
| 481 } | |
| 482 if(padding > 0) { | |
| 483 assert((padding % nop_size) == 0, "padding is not a multiple of NOP size"); | |
| 484 int nops_cnt = padding / nop_size; | |
| 485 MachNode *nop = new (this) MachNopNode(nops_cnt); | |
| 486 b->_nodes.insert(j++, nop); | |
| 487 _cfg->_bbs.map( nop->_idx, b ); | |
| 488 adr += padding; | |
| 489 last_inst++; | |
| 490 } | |
| 491 } | |
| 492 adr += nj->size(_regalloc); | |
| 493 | |
| 494 // Remember end of call offset | |
| 495 if (nj->is_MachCall() && nj->as_MachCall()->is_safepoint_node()) { | |
| 496 last_call_adr = adr; | |
| 497 } | |
| 498 } | |
| 499 | |
| 500 if ( i != _cfg->_num_blocks-1) { | |
| 501 // Get the size of the block | |
| 502 uint blk_size = adr - blk_starts[i]; | |
| 503 | |
| 418 | 504 // When the next block is the top of a loop, we may insert pad NOP |
| 0 | 505 // instructions. |
| 506 Block *nb = _cfg->_blocks[i+1]; | |
| 507 int current_offset = blk_starts[i] + blk_size; | |
| 508 current_offset += nb->alignment_padding(current_offset); | |
| 509 // Save block size; update total method size | |
| 510 blk_starts[i+1] = current_offset; | |
| 511 } | |
| 512 } | |
| 513 | |
| 514 #ifdef ASSERT | |
| 515 for( i=0; i<_cfg->_num_blocks; i++ ) { // For all blocks | |
| 516 if( jmp_target[i] != 0 ) { | |
| 517 int offset = blk_starts[jmp_target[i]]-(blk_starts[i] + jmp_end[i]); | |
|
415
4d9884b01ba6
6754519: don't emit flag fixup for NaN when condition being tested doesn't need it
never
parents:
331
diff
changeset
|
518 if (!_matcher->is_short_branch_offset(jmp_rule[i], offset)) { |
| 0 | 519 tty->print_cr("target (%d) - jmp_end(%d) = offset (%d), jmp_block B%d, target_block B%d", blk_starts[jmp_target[i]], blk_starts[i] + jmp_end[i], offset, i, jmp_target[i]); |
| 520 } | |
|
415
4d9884b01ba6
6754519: don't emit flag fixup for NaN when condition being tested doesn't need it
never
parents:
331
diff
changeset
|
521 assert(_matcher->is_short_branch_offset(jmp_rule[i], offset), "Displacement too large for short jmp"); |
| 0 | 522 } |
| 523 } | |
| 524 #endif | |
| 525 | |
| 526 // ------------------ | |
| 527 // Compute size for code buffer | |
| 528 code_size = blk_starts[i-1] + jmp_end[i-1]; | |
| 529 | |
| 530 // Relocation records | |
| 531 reloc_size += 1; // Relo entry for exception handler | |
| 532 | |
| 533 // Adjust reloc_size to number of record of relocation info | |
| 534 // Min is 2 bytes, max is probably 6 or 8, with a tax up to 25% for | |
| 535 // a relocation index. | |
| 536 // The CodeBuffer will expand the locs array if this estimate is too low. | |
| 537 reloc_size *= 10 / sizeof(relocInfo); | |
| 538 | |
| 539 // Adjust const_size to number of bytes | |
| 540 const_size *= 2*jintSize; // both float and double take two words per entry | |
| 541 | |
| 542 } | |
| 543 | |
| 544 //------------------------------FillLocArray----------------------------------- | |
| 545 // Create a bit of debug info and append it to the array. The mapping is from | |
| 546 // Java local or expression stack to constant, register or stack-slot. For | |
| 547 // doubles, insert 2 mappings and return 1 (to tell the caller that the next | |
| 548 // entry has been taken care of and caller should skip it). | |
| 549 static LocationValue *new_loc_value( PhaseRegAlloc *ra, OptoReg::Name regnum, Location::Type l_type ) { | |
| 550 // This should never have accepted Bad before | |
| 551 assert(OptoReg::is_valid(regnum), "location must be valid"); | |
| 552 return (OptoReg::is_reg(regnum)) | |
| 553 ? new LocationValue(Location::new_reg_loc(l_type, OptoReg::as_VMReg(regnum)) ) | |
| 554 : new LocationValue(Location::new_stk_loc(l_type, ra->reg2offset(regnum))); | |
| 555 } | |
| 556 | |
|
63
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
557 |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
558 ObjectValue* |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
559 Compile::sv_for_node_id(GrowableArray<ScopeValue*> *objs, int id) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
560 for (int i = 0; i < objs->length(); i++) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
561 assert(objs->at(i)->is_object(), "corrupt object cache"); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
562 ObjectValue* sv = (ObjectValue*) objs->at(i); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
563 if (sv->id() == id) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
564 return sv; |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
565 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
566 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
567 // Otherwise.. |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
568 return NULL; |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
569 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
570 |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
571 void Compile::set_sv_for_object_node(GrowableArray<ScopeValue*> *objs, |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
572 ObjectValue* sv ) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
573 assert(sv_for_node_id(objs, sv->id()) == NULL, "Precondition"); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
574 objs->append(sv); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
575 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
576 |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
577 |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
578 void Compile::FillLocArray( int idx, MachSafePointNode* sfpt, Node *local, |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
579 GrowableArray<ScopeValue*> *array, |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
580 GrowableArray<ScopeValue*> *objs ) { |
| 0 | 581 assert( local, "use _top instead of null" ); |
| 582 if (array->length() != idx) { | |
| 583 assert(array->length() == idx + 1, "Unexpected array count"); | |
| 584 // Old functionality: | |
| 585 // return | |
| 586 // New functionality: | |
| 587 // Assert if the local is not top. In product mode let the new node | |
| 588 // override the old entry. | |
| 589 assert(local == top(), "LocArray collision"); | |
| 590 if (local == top()) { | |
| 591 return; | |
| 592 } | |
| 593 array->pop(); | |
| 594 } | |
| 595 const Type *t = local->bottom_type(); | |
| 596 | |
|
63
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
597 // Is it a safepoint scalar object node? |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
598 if (local->is_SafePointScalarObject()) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
599 SafePointScalarObjectNode* spobj = local->as_SafePointScalarObject(); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
600 |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
601 ObjectValue* sv = Compile::sv_for_node_id(objs, spobj->_idx); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
602 if (sv == NULL) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
603 ciKlass* cik = t->is_oopptr()->klass(); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
604 assert(cik->is_instance_klass() || |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
605 cik->is_array_klass(), "Not supported allocation."); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
606 sv = new ObjectValue(spobj->_idx, |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
607 new ConstantOopWriteValue(cik->encoding())); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
608 Compile::set_sv_for_object_node(objs, sv); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
609 |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
610 uint first_ind = spobj->first_index(); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
611 for (uint i = 0; i < spobj->n_fields(); i++) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
612 Node* fld_node = sfpt->in(first_ind+i); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
613 (void)FillLocArray(sv->field_values()->length(), sfpt, fld_node, sv->field_values(), objs); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
614 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
615 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
616 array->append(sv); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
617 return; |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
618 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
619 |
| 0 | 620 // Grab the register number for the local |
| 621 OptoReg::Name regnum = _regalloc->get_reg_first(local); | |
| 622 if( OptoReg::is_valid(regnum) ) {// Got a register/stack? | |
| 623 // Record the double as two float registers. | |
| 624 // The register mask for such a value always specifies two adjacent | |
| 625 // float registers, with the lower register number even. | |
| 626 // Normally, the allocation of high and low words to these registers | |
| 627 // is irrelevant, because nearly all operations on register pairs | |
| 628 // (e.g., StoreD) treat them as a single unit. | |
| 629 // Here, we assume in addition that the words in these two registers | |
| 630 // stored "naturally" (by operations like StoreD and double stores | |
| 631 // within the interpreter) such that the lower-numbered register | |
| 632 // is written to the lower memory address. This may seem like | |
| 633 // a machine dependency, but it is not--it is a requirement on | |
| 634 // the author of the <arch>.ad file to ensure that, for every | |
| 635 // even/odd double-register pair to which a double may be allocated, | |
| 636 // the word in the even single-register is stored to the first | |
| 637 // memory word. (Note that register numbers are completely | |
| 638 // arbitrary, and are not tied to any machine-level encodings.) | |
| 639 #ifdef _LP64 | |
| 640 if( t->base() == Type::DoubleBot || t->base() == Type::DoubleCon ) { | |
| 641 array->append(new ConstantIntValue(0)); | |
| 642 array->append(new_loc_value( _regalloc, regnum, Location::dbl )); | |
| 643 } else if ( t->base() == Type::Long ) { | |
| 644 array->append(new ConstantIntValue(0)); | |
| 645 array->append(new_loc_value( _regalloc, regnum, Location::lng )); | |
| 646 } else if ( t->base() == Type::RawPtr ) { | |
| 647 // jsr/ret return address which must be restored into a the full | |
| 648 // width 64-bit stack slot. | |
| 649 array->append(new_loc_value( _regalloc, regnum, Location::lng )); | |
| 650 } | |
| 651 #else //_LP64 | |
| 652 #ifdef SPARC | |
| 653 if (t->base() == Type::Long && OptoReg::is_reg(regnum)) { | |
| 654 // For SPARC we have to swap high and low words for | |
| 655 // long values stored in a single-register (g0-g7). | |
| 656 array->append(new_loc_value( _regalloc, regnum , Location::normal )); | |
| 657 array->append(new_loc_value( _regalloc, OptoReg::add(regnum,1), Location::normal )); | |
| 658 } else | |
| 659 #endif //SPARC | |
| 660 if( t->base() == Type::DoubleBot || t->base() == Type::DoubleCon || t->base() == Type::Long ) { | |
| 661 // Repack the double/long as two jints. | |
| 662 // The convention the interpreter uses is that the second local | |
| 663 // holds the first raw word of the native double representation. | |
| 664 // This is actually reasonable, since locals and stack arrays | |
| 665 // grow downwards in all implementations. | |
| 666 // (If, on some machine, the interpreter's Java locals or stack | |
| 667 // were to grow upwards, the embedded doubles would be word-swapped.) | |
| 668 array->append(new_loc_value( _regalloc, OptoReg::add(regnum,1), Location::normal )); | |
| 669 array->append(new_loc_value( _regalloc, regnum , Location::normal )); | |
| 670 } | |
| 671 #endif //_LP64 | |
| 672 else if( (t->base() == Type::FloatBot || t->base() == Type::FloatCon) && | |
| 673 OptoReg::is_reg(regnum) ) { | |
| 674 array->append(new_loc_value( _regalloc, regnum, Matcher::float_in_double | |
| 675 ? Location::float_in_dbl : Location::normal )); | |
| 676 } else if( t->base() == Type::Int && OptoReg::is_reg(regnum) ) { | |
| 677 array->append(new_loc_value( _regalloc, regnum, Matcher::int_in_long | |
| 678 ? Location::int_in_long : Location::normal )); | |
|
331
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
679 } else if( t->base() == Type::NarrowOop ) { |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
680 array->append(new_loc_value( _regalloc, regnum, Location::narrowoop )); |
| 0 | 681 } else { |
| 682 array->append(new_loc_value( _regalloc, regnum, _regalloc->is_oop(local) ? Location::oop : Location::normal )); | |
| 683 } | |
| 684 return; | |
| 685 } | |
| 686 | |
| 687 // No register. It must be constant data. | |
| 688 switch (t->base()) { | |
| 689 case Type::Half: // Second half of a double | |
| 690 ShouldNotReachHere(); // Caller should skip 2nd halves | |
| 691 break; | |
| 692 case Type::AnyPtr: | |
| 693 array->append(new ConstantOopWriteValue(NULL)); | |
| 694 break; | |
| 695 case Type::AryPtr: | |
| 696 case Type::InstPtr: | |
| 697 case Type::KlassPtr: // fall through | |
| 698 array->append(new ConstantOopWriteValue(t->isa_oopptr()->const_oop()->encoding())); | |
| 699 break; | |
|
331
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
700 case Type::NarrowOop: |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
701 if (t == TypeNarrowOop::NULL_PTR) { |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
702 array->append(new ConstantOopWriteValue(NULL)); |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
703 } else { |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
704 array->append(new ConstantOopWriteValue(t->make_ptr()->isa_oopptr()->const_oop()->encoding())); |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
705 } |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
706 break; |
| 0 | 707 case Type::Int: |
| 708 array->append(new ConstantIntValue(t->is_int()->get_con())); | |
| 709 break; | |
| 710 case Type::RawPtr: | |
| 711 // A return address (T_ADDRESS). | |
| 712 assert((intptr_t)t->is_ptr()->get_con() < (intptr_t)0x10000, "must be a valid BCI"); | |
| 713 #ifdef _LP64 | |
| 714 // Must be restored to the full-width 64-bit stack slot. | |
| 715 array->append(new ConstantLongValue(t->is_ptr()->get_con())); | |
| 716 #else | |
| 717 array->append(new ConstantIntValue(t->is_ptr()->get_con())); | |
| 718 #endif | |
| 719 break; | |
| 720 case Type::FloatCon: { | |
| 721 float f = t->is_float_constant()->getf(); | |
| 722 array->append(new ConstantIntValue(jint_cast(f))); | |
| 723 break; | |
| 724 } | |
| 725 case Type::DoubleCon: { | |
| 726 jdouble d = t->is_double_constant()->getd(); | |
| 727 #ifdef _LP64 | |
| 728 array->append(new ConstantIntValue(0)); | |
| 729 array->append(new ConstantDoubleValue(d)); | |
| 730 #else | |
| 731 // Repack the double as two jints. | |
| 732 // The convention the interpreter uses is that the second local | |
| 733 // holds the first raw word of the native double representation. | |
| 734 // This is actually reasonable, since locals and stack arrays | |
| 735 // grow downwards in all implementations. | |
| 736 // (If, on some machine, the interpreter's Java locals or stack | |
| 737 // were to grow upwards, the embedded doubles would be word-swapped.) | |
| 738 jint *dp = (jint*)&d; | |
| 739 array->append(new ConstantIntValue(dp[1])); | |
| 740 array->append(new ConstantIntValue(dp[0])); | |
| 741 #endif | |
| 742 break; | |
| 743 } | |
| 744 case Type::Long: { | |
| 745 jlong d = t->is_long()->get_con(); | |
| 746 #ifdef _LP64 | |
| 747 array->append(new ConstantIntValue(0)); | |
| 748 array->append(new ConstantLongValue(d)); | |
| 749 #else | |
| 750 // Repack the long as two jints. | |
| 751 // The convention the interpreter uses is that the second local | |
| 752 // holds the first raw word of the native double representation. | |
| 753 // This is actually reasonable, since locals and stack arrays | |
| 754 // grow downwards in all implementations. | |
| 755 // (If, on some machine, the interpreter's Java locals or stack | |
| 756 // were to grow upwards, the embedded doubles would be word-swapped.) | |
| 757 jint *dp = (jint*)&d; | |
| 758 array->append(new ConstantIntValue(dp[1])); | |
| 759 array->append(new ConstantIntValue(dp[0])); | |
| 760 #endif | |
| 761 break; | |
| 762 } | |
| 763 case Type::Top: // Add an illegal value here | |
| 764 array->append(new LocationValue(Location())); | |
| 765 break; | |
| 766 default: | |
| 767 ShouldNotReachHere(); | |
| 768 break; | |
| 769 } | |
| 770 } | |
| 771 | |
| 772 // Determine if this node starts a bundle | |
| 773 bool Compile::starts_bundle(const Node *n) const { | |
| 774 return (_node_bundling_limit > n->_idx && | |
| 775 _node_bundling_base[n->_idx].starts_bundle()); | |
| 776 } | |
| 777 | |
| 778 //--------------------------Process_OopMap_Node-------------------------------- | |
| 779 void Compile::Process_OopMap_Node(MachNode *mach, int current_offset) { | |
| 780 | |
| 781 // Handle special safepoint nodes for synchronization | |
| 782 MachSafePointNode *sfn = mach->as_MachSafePoint(); | |
| 783 MachCallNode *mcall; | |
| 784 | |
| 785 #ifdef ENABLE_ZAP_DEAD_LOCALS | |
| 786 assert( is_node_getting_a_safepoint(mach), "logic does not match; false negative"); | |
| 787 #endif | |
| 788 | |
| 789 int safepoint_pc_offset = current_offset; | |
| 790 | |
| 791 // Add the safepoint in the DebugInfoRecorder | |
| 792 if( !mach->is_MachCall() ) { | |
| 793 mcall = NULL; | |
| 794 debug_info()->add_safepoint(safepoint_pc_offset, sfn->_oop_map); | |
| 795 } else { | |
| 796 mcall = mach->as_MachCall(); | |
| 797 safepoint_pc_offset += mcall->ret_addr_offset(); | |
| 798 debug_info()->add_safepoint(safepoint_pc_offset, mcall->_oop_map); | |
| 799 } | |
| 800 | |
| 801 // Loop over the JVMState list to add scope information | |
| 802 // Do not skip safepoints with a NULL method, they need monitor info | |
| 803 JVMState* youngest_jvms = sfn->jvms(); | |
| 804 int max_depth = youngest_jvms->depth(); | |
| 805 | |
|
63
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
806 // Allocate the object pool for scalar-replaced objects -- the map from |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
807 // small-integer keys (which can be recorded in the local and ostack |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
808 // arrays) to descriptions of the object state. |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
809 GrowableArray<ScopeValue*> *objs = new GrowableArray<ScopeValue*>(); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
810 |
| 0 | 811 // Visit scopes from oldest to youngest. |
| 812 for (int depth = 1; depth <= max_depth; depth++) { | |
| 813 JVMState* jvms = youngest_jvms->of_depth(depth); | |
| 814 int idx; | |
| 815 ciMethod* method = jvms->has_method() ? jvms->method() : NULL; | |
| 816 // Safepoints that do not have method() set only provide oop-map and monitor info | |
| 817 // to support GC; these do not support deoptimization. | |
| 818 int num_locs = (method == NULL) ? 0 : jvms->loc_size(); | |
| 819 int num_exps = (method == NULL) ? 0 : jvms->stk_size(); | |
| 820 int num_mon = jvms->nof_monitors(); | |
| 821 assert(method == NULL || jvms->bci() < 0 || num_locs == method->max_locals(), | |
| 822 "JVMS local count must match that of the method"); | |
| 823 | |
| 824 // Add Local and Expression Stack Information | |
| 825 | |
| 826 // Insert locals into the locarray | |
| 827 GrowableArray<ScopeValue*> *locarray = new GrowableArray<ScopeValue*>(num_locs); | |
| 828 for( idx = 0; idx < num_locs; idx++ ) { | |
|
63
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
829 FillLocArray( idx, sfn, sfn->local(jvms, idx), locarray, objs ); |
| 0 | 830 } |
| 831 | |
| 832 // Insert expression stack entries into the exparray | |
| 833 GrowableArray<ScopeValue*> *exparray = new GrowableArray<ScopeValue*>(num_exps); | |
| 834 for( idx = 0; idx < num_exps; idx++ ) { | |
|
63
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
835 FillLocArray( idx, sfn, sfn->stack(jvms, idx), exparray, objs ); |
| 0 | 836 } |
| 837 | |
| 838 // Add in mappings of the monitors | |
| 839 assert( !method || | |
| 840 !method->is_synchronized() || | |
| 841 method->is_native() || | |
| 842 num_mon > 0 || | |
| 843 !GenerateSynchronizationCode, | |
| 844 "monitors must always exist for synchronized methods"); | |
| 845 | |
| 846 // Build the growable array of ScopeValues for exp stack | |
| 847 GrowableArray<MonitorValue*> *monarray = new GrowableArray<MonitorValue*>(num_mon); | |
| 848 | |
| 849 // Loop over monitors and insert into array | |
| 850 for(idx = 0; idx < num_mon; idx++) { | |
| 851 // Grab the node that defines this monitor | |
|
460
424f9bfe6b96
6775880: EA +DeoptimizeALot: assert(mon_info->owner()->is_locked(),"object must be locked now")
kvn
parents:
418
diff
changeset
|
852 Node* box_node = sfn->monitor_box(jvms, idx); |
|
424f9bfe6b96
6775880: EA +DeoptimizeALot: assert(mon_info->owner()->is_locked(),"object must be locked now")
kvn
parents:
418
diff
changeset
|
853 Node* obj_node = sfn->monitor_obj(jvms, idx); |
| 0 | 854 |
| 855 // Create ScopeValue for object | |
| 856 ScopeValue *scval = NULL; | |
|
63
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
857 |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
858 if( obj_node->is_SafePointScalarObject() ) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
859 SafePointScalarObjectNode* spobj = obj_node->as_SafePointScalarObject(); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
860 scval = Compile::sv_for_node_id(objs, spobj->_idx); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
861 if (scval == NULL) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
862 const Type *t = obj_node->bottom_type(); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
863 ciKlass* cik = t->is_oopptr()->klass(); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
864 assert(cik->is_instance_klass() || |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
865 cik->is_array_klass(), "Not supported allocation."); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
866 ObjectValue* sv = new ObjectValue(spobj->_idx, |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
867 new ConstantOopWriteValue(cik->encoding())); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
868 Compile::set_sv_for_object_node(objs, sv); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
869 |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
870 uint first_ind = spobj->first_index(); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
871 for (uint i = 0; i < spobj->n_fields(); i++) { |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
872 Node* fld_node = sfn->in(first_ind+i); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
873 (void)FillLocArray(sv->field_values()->length(), sfn, fld_node, sv->field_values(), objs); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
874 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
875 scval = sv; |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
876 } |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
877 } else if( !obj_node->is_Con() ) { |
| 0 | 878 OptoReg::Name obj_reg = _regalloc->get_reg_first(obj_node); |
|
331
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
879 if( obj_node->bottom_type()->base() == Type::NarrowOop ) { |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
880 scval = new_loc_value( _regalloc, obj_reg, Location::narrowoop ); |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
881 } else { |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
882 scval = new_loc_value( _regalloc, obj_reg, Location::oop ); |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
883 } |
| 0 | 884 } else { |
|
331
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
885 const TypePtr *tp = obj_node->bottom_type()->make_ptr(); |
|
cecd8eb4e0ca
6706829: Compressed Oops: add debug info for narrow oops
kvn
parents:
235
diff
changeset
|
886 scval = new ConstantOopWriteValue(tp->is_instptr()->const_oop()->encoding()); |
| 0 | 887 } |
| 888 | |
| 889 OptoReg::Name box_reg = BoxLockNode::stack_slot(box_node); | |
|
66
6dbf1a175d6b
6672848: (Escape Analysis) improve lock elimination with EA
kvn
parents:
63
diff
changeset
|
890 Location basic_lock = Location::new_stk_loc(Location::normal,_regalloc->reg2offset(box_reg)); |
|
460
424f9bfe6b96
6775880: EA +DeoptimizeALot: assert(mon_info->owner()->is_locked(),"object must be locked now")
kvn
parents:
418
diff
changeset
|
891 while( !box_node->is_BoxLock() ) box_node = box_node->in(1); |
|
66
6dbf1a175d6b
6672848: (Escape Analysis) improve lock elimination with EA
kvn
parents:
63
diff
changeset
|
892 monarray->append(new MonitorValue(scval, basic_lock, box_node->as_BoxLock()->is_eliminated())); |
| 0 | 893 } |
| 894 | |
|
63
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
895 // We dump the object pool first, since deoptimization reads it in first. |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
896 debug_info()->dump_object_pool(objs); |
|
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
897 |
| 0 | 898 // Build first class objects to pass to scope |
| 899 DebugToken *locvals = debug_info()->create_scope_values(locarray); | |
| 900 DebugToken *expvals = debug_info()->create_scope_values(exparray); | |
| 901 DebugToken *monvals = debug_info()->create_monitor_values(monarray); | |
| 902 | |
| 903 // Make method available for all Safepoints | |
| 904 ciMethod* scope_method = method ? method : _method; | |
| 905 // Describe the scope here | |
| 906 assert(jvms->bci() >= InvocationEntryBci && jvms->bci() <= 0x10000, "must be a valid or entry BCI"); | |
|
63
eac007780a58
6671807: (Escape Analysis) Add new ideal node to represent the state of a scalarized object at a safepoint
kvn
parents:
28
diff
changeset
|
907 // Now we can describe the scope. |
| 0 | 908 debug_info()->describe_scope(safepoint_pc_offset,scope_method,jvms->bci(),locvals,expvals,monvals); |
| 909 } // End jvms loop | |
| 910 | |
| 911 // Mark the end of the scope set. | |
| 912 debug_info()->end_safepoint(safepoint_pc_offset); | |
| 913 } | |
| 914 | |
| 915 | |
| 916 | |
| 917 // A simplified version of Process_OopMap_Node, to handle non-safepoints. | |
| 918 class NonSafepointEmitter { | |
| 919 Compile* C; | |
| 920 JVMState* _pending_jvms; | |
| 921 int _pending_offset; | |
| 922 | |
| 923 void emit_non_safepoint(); | |
| 924 | |
| 925 public: | |
| 926 NonSafepointEmitter(Compile* compile) { | |
| 927 this->C = compile; | |
| 928 _pending_jvms = NULL; | |
| 929 _pending_offset = 0; | |
| 930 } | |
| 931 | |
| 932 void observe_instruction(Node* n, int pc_offset) { | |
| 933 if (!C->debug_info()->recording_non_safepoints()) return; | |
| 934 | |
| 935 Node_Notes* nn = C->node_notes_at(n->_idx); | |
| 936 if (nn == NULL || nn->jvms() == NULL) return; | |
| 937 if (_pending_jvms != NULL && | |
| 938 _pending_jvms->same_calls_as(nn->jvms())) { | |
| 939 // Repeated JVMS? Stretch it up here. | |
| 940 _pending_offset = pc_offset; | |
| 941 } else { | |
| 942 if (_pending_jvms != NULL && | |
| 943 _pending_offset < pc_offset) { | |
| 944 emit_non_safepoint(); | |
| 945 } | |
| 946 _pending_jvms = NULL; | |
| 947 if (pc_offset > C->debug_info()->last_pc_offset()) { | |
| 948 // This is the only way _pending_jvms can become non-NULL: | |
| 949 _pending_jvms = nn->jvms(); | |
| 950 _pending_offset = pc_offset; | |
| 951 } | |
| 952 } | |
| 953 } | |
| 954 | |
| 955 // Stay out of the way of real safepoints: | |
| 956 void observe_safepoint(JVMState* jvms, int pc_offset) { | |
| 957 if (_pending_jvms != NULL && | |
| 958 !_pending_jvms->same_calls_as(jvms) && | |
| 959 _pending_offset < pc_offset) { | |
| 960 emit_non_safepoint(); | |
| 961 } | |
| 962 _pending_jvms = NULL; | |
| 963 } | |
| 964 | |
| 965 void flush_at_end() { | |
| 966 if (_pending_jvms != NULL) { | |
| 967 emit_non_safepoint(); | |
| 968 } | |
| 969 _pending_jvms = NULL; | |
| 970 } | |
| 971 }; | |
| 972 | |
| 973 void NonSafepointEmitter::emit_non_safepoint() { | |
| 974 JVMState* youngest_jvms = _pending_jvms; | |
| 975 int pc_offset = _pending_offset; | |
| 976 | |
| 977 // Clear it now: | |
| 978 _pending_jvms = NULL; | |
| 979 | |
| 980 DebugInformationRecorder* debug_info = C->debug_info(); | |
| 981 assert(debug_info->recording_non_safepoints(), "sanity"); | |
| 982 | |
| 983 debug_info->add_non_safepoint(pc_offset); | |
| 984 int max_depth = youngest_jvms->depth(); | |
| 985 | |
| 986 // Visit scopes from oldest to youngest. | |
| 987 for (int depth = 1; depth <= max_depth; depth++) { | |
| 988 JVMState* jvms = youngest_jvms->of_depth(depth); | |
| 989 ciMethod* method = jvms->has_method() ? jvms->method() : NULL; | |
| 990 debug_info->describe_scope(pc_offset, method, jvms->bci()); | |
| 991 } | |
| 992 | |
| 993 // Mark the end of the scope set. | |
| 994 debug_info->end_non_safepoint(pc_offset); | |
| 995 } | |
| 996 | |
| 997 | |
| 998 | |
| 999 // helper for Fill_buffer bailout logic | |
| 1000 static void turn_off_compiler(Compile* C) { | |
| 1001 if (CodeCache::unallocated_capacity() >= CodeCacheMinimumFreeSpace*10) { | |
| 1002 // Do not turn off compilation if a single giant method has | |
| 1003 // blown the code cache size. | |
| 1004 C->record_failure("excessive request to CodeCache"); | |
| 1005 } else { | |
| 28 | 1006 // Let CompilerBroker disable further compilations. |
| 0 | 1007 C->record_failure("CodeCache is full"); |
| 1008 } | |
| 1009 } | |
| 1010 | |
| 1011 | |
| 1012 //------------------------------Fill_buffer------------------------------------ | |
| 1013 void Compile::Fill_buffer() { | |
| 1014 | |
| 1015 // Set the initially allocated size | |
| 1016 int code_req = initial_code_capacity; | |
| 1017 int locs_req = initial_locs_capacity; | |
| 1018 int stub_req = TraceJumps ? initial_stub_capacity * 10 : initial_stub_capacity; | |
| 1019 int const_req = initial_const_capacity; | |
| 1020 bool labels_not_set = true; | |
| 1021 | |
| 1022 int pad_req = NativeCall::instruction_size; | |
| 1023 // The extra spacing after the code is necessary on some platforms. | |
| 1024 // Sometimes we need to patch in a jump after the last instruction, | |
| 1025 // if the nmethod has been deoptimized. (See 4932387, 4894843.) | |
| 1026 | |
| 1027 uint i; | |
| 1028 // Compute the byte offset where we can store the deopt pc. | |
| 1029 if (fixed_slots() != 0) { | |
| 1030 _orig_pc_slot_offset_in_bytes = _regalloc->reg2offset(OptoReg::stack2reg(_orig_pc_slot)); | |
| 1031 } | |
| 1032 | |
| 1033 // Compute prolog code size | |
| 1034 _method_size = 0; | |
| 1035 _frame_slots = OptoReg::reg2stack(_matcher->_old_SP)+_regalloc->_framesize; | |
| 1036 #ifdef IA64 | |
| 1037 if (save_argument_registers()) { | |
| 1038 // 4815101: this is a stub with implicit and unknown precision fp args. | |
| 1039 // The usual spill mechanism can only generate stfd's in this case, which | |
| 1040 // doesn't work if the fp reg to spill contains a single-precision denorm. | |
| 1041 // Instead, we hack around the normal spill mechanism using stfspill's and | |
| 1042 // ldffill's in the MachProlog and MachEpilog emit methods. We allocate | |
| 1043 // space here for the fp arg regs (f8-f15) we're going to thusly spill. | |
| 1044 // | |
| 1045 // If we ever implement 16-byte 'registers' == stack slots, we can | |
| 1046 // get rid of this hack and have SpillCopy generate stfspill/ldffill | |
| 1047 // instead of stfd/stfs/ldfd/ldfs. | |
| 1048 _frame_slots += 8*(16/BytesPerInt); | |
| 1049 } | |
| 1050 #endif | |
| 1051 assert( _frame_slots >= 0 && _frame_slots < 1000000, "sanity check" ); | |
| 1052 | |
| 1053 // Create an array of unused labels, one for each basic block | |
| 1054 Label *blk_labels = NEW_RESOURCE_ARRAY(Label, _cfg->_num_blocks+1); | |
| 1055 | |
| 1056 for( i=0; i <= _cfg->_num_blocks; i++ ) { | |
| 1057 blk_labels[i].init(); | |
| 1058 } | |
| 1059 | |
| 1060 // If this machine supports different size branch offsets, then pre-compute | |
| 1061 // the length of the blocks | |
|
415
4d9884b01ba6
6754519: don't emit flag fixup for NaN when condition being tested doesn't need it
never
parents:
331
diff
changeset
|
1062 if( _matcher->is_short_branch_offset(-1, 0) ) { |
| 0 | 1063 Shorten_branches(blk_labels, code_req, locs_req, stub_req, const_req); |
| 1064 labels_not_set = false; | |
| 1065 } | |
| 1066 | |
| 1067 // nmethod and CodeBuffer count stubs & constants as part of method's code. | |
| 1068 int exception_handler_req = size_exception_handler(); | |
| 1069 int deopt_handler_req = size_deopt_handler(); | |
| 1070 exception_handler_req += MAX_stubs_size; // add marginal slop for handler | |
| 1071 deopt_handler_req += MAX_stubs_size; // add marginal slop for handler | |
| 1072 stub_req += MAX_stubs_size; // ensure per-stub margin | |
| 1073 code_req += MAX_inst_size; // ensure per-instruction margin | |
| 1074 if (StressCodeBuffers) | |
| 1075 code_req = const_req = stub_req = exception_handler_req = deopt_handler_req = 0x10; // force expansion | |
| 1076 int total_req = code_req + pad_req + stub_req + exception_handler_req + deopt_handler_req + const_req; | |
| 1077 CodeBuffer* cb = code_buffer(); | |
| 1078 cb->initialize(total_req, locs_req); | |
| 1079 | |
| 1080 // Have we run out of code space? | |
| 1081 if (cb->blob() == NULL) { | |
| 1082 turn_off_compiler(this); | |
| 1083 return; | |
| 1084 } | |
| 1085 // Configure the code buffer. | |
| 1086 cb->initialize_consts_size(const_req); | |
| 1087 cb->initialize_stubs_size(stub_req); | |
| 1088 cb->initialize_oop_recorder(env()->oop_recorder()); | |
| 1089 | |
| 1090 // fill in the nop array for bundling computations | |
| 1091 MachNode *_nop_list[Bundle::_nop_count]; | |
| 1092 Bundle::initialize_nops(_nop_list, this); | |
| 1093 | |
| 1094 // Create oopmap set. | |
| 1095 _oop_map_set = new OopMapSet(); | |
| 1096 | |
| 1097 // !!!!! This preserves old handling of oopmaps for now | |
| 1098 debug_info()->set_oopmaps(_oop_map_set); | |
| 1099 | |
| 1100 // Count and start of implicit null check instructions | |
| 1101 uint inct_cnt = 0; | |
| 1102 uint *inct_starts = NEW_RESOURCE_ARRAY(uint, _cfg->_num_blocks+1); | |
| 1103 | |
| 1104 // Count and start of calls | |
| 1105 uint *call_returns = NEW_RESOURCE_ARRAY(uint, _cfg->_num_blocks+1); | |
| 1106 | |
| 1107 uint return_offset = 0; | |
| 1108 MachNode *nop = new (this) MachNopNode(); | |
| 1109 | |
| 1110 int previous_offset = 0; | |
| 1111 int current_offset = 0; | |
| 1112 int last_call_offset = -1; | |
| 1113 | |
| 1114 // Create an array of unused labels, one for each basic block, if printing is enabled | |
| 1115 #ifndef PRODUCT | |
| 1116 int *node_offsets = NULL; | |
| 1117 uint node_offset_limit = unique(); | |
| 1118 | |
| 1119 | |
| 1120 if ( print_assembly() ) | |
| 1121 node_offsets = NEW_RESOURCE_ARRAY(int, node_offset_limit); | |
| 1122 #endif | |
| 1123 | |
| 1124 NonSafepointEmitter non_safepoints(this); // emit non-safepoints lazily | |
| 1125 | |
| 1126 // ------------------ | |
| 1127 // Now fill in the code buffer | |
| 1128 Node *delay_slot = NULL; | |
| 1129 | |
| 1130 for( i=0; i < _cfg->_num_blocks; i++ ) { | |
| 1131 Block *b = _cfg->_blocks[i]; | |
| 1132 | |
| 1133 Node *head = b->head(); | |
| 1134 | |
| 1135 // If this block needs to start aligned (i.e, can be reached other | |
| 1136 // than by falling-thru from the previous block), then force the | |
| 1137 // start of a new bundle. | |
| 1138 if( Pipeline::requires_bundling() && starts_bundle(head) ) | |
| 1139 cb->flush_bundle(true); | |
| 1140 | |
| 1141 // Define the label at the beginning of the basic block | |
| 1142 if( labels_not_set ) | |
| 1143 MacroAssembler(cb).bind( blk_labels[b->_pre_order] ); | |
| 1144 | |
| 1145 else | |
| 1146 assert( blk_labels[b->_pre_order].loc_pos() == cb->code_size(), | |
| 1147 "label position does not match code offset" ); | |
| 1148 | |
| 1149 uint last_inst = b->_nodes.size(); | |
| 1150 | |
| 1151 // Emit block normally, except for last instruction. | |
| 1152 // Emit means "dump code bits into code buffer". | |
| 1153 for( uint j = 0; j<last_inst; j++ ) { | |
| 1154 | |
| 1155 // Get the node | |
| 1156 Node* n = b->_nodes[j]; | |
| 1157 | |
| 1158 // See if delay slots are supported | |
| 1159 if (valid_bundle_info(n) && | |
| 1160 node_bundling(n)->used_in_unconditional_delay()) { | |
| 1161 assert(delay_slot == NULL, "no use of delay slot node"); | |
| 1162 assert(n->size(_regalloc) == Pipeline::instr_unit_size(), "delay slot instruction wrong size"); | |
| 1163 | |
| 1164 delay_slot = n; | |
| 1165 continue; | |
| 1166 } | |
| 1167 | |
| 1168 // If this starts a new instruction group, then flush the current one | |
| 1169 // (but allow split bundles) | |
| 1170 if( Pipeline::requires_bundling() && starts_bundle(n) ) | |
| 1171 cb->flush_bundle(false); | |
| 1172 | |
| 1173 // The following logic is duplicated in the code ifdeffed for | |
| 605 | 1174 // ENABLE_ZAP_DEAD_LOCALS which appears above in this file. It |
| 0 | 1175 // should be factored out. Or maybe dispersed to the nodes? |
| 1176 | |
| 1177 // Special handling for SafePoint/Call Nodes | |
| 1178 bool is_mcall = false; | |
| 1179 if( n->is_Mach() ) { | |
| 1180 MachNode *mach = n->as_Mach(); | |
| 1181 is_mcall = n->is_MachCall(); | |
| 1182 bool is_sfn = n->is_MachSafePoint(); | |
| 1183 | |
| 1184 // If this requires all previous instructions be flushed, then do so | |
| 1185 if( is_sfn || is_mcall || mach->alignment_required() != 1) { | |
| 1186 cb->flush_bundle(true); | |
| 1187 current_offset = cb->code_size(); | |
| 1188 } | |
| 1189 | |
| 1190 // align the instruction if necessary | |
| 1191 int nop_size = nop->size(_regalloc); | |
| 1192 int padding = mach->compute_padding(current_offset); | |
| 1193 // Make sure safepoint node for polling is distinct from a call's | |
| 1194 // return by adding a nop if needed. | |
| 1195 if (is_sfn && !is_mcall && padding == 0 && current_offset == last_call_offset ) { | |
| 1196 padding = nop_size; | |
| 1197 } | |
| 1198 assert( labels_not_set || padding == 0, "instruction should already be aligned") | |
| 1199 | |
| 1200 if(padding > 0) { | |
| 1201 assert((padding % nop_size) == 0, "padding is not a multiple of NOP size"); | |
| 1202 int nops_cnt = padding / nop_size; | |
| 1203 MachNode *nop = new (this) MachNopNode(nops_cnt); | |
| 1204 b->_nodes.insert(j++, nop); | |
| 1205 last_inst++; | |
| 1206 _cfg->_bbs.map( nop->_idx, b ); | |
| 1207 nop->emit(*cb, _regalloc); | |
| 1208 cb->flush_bundle(true); | |
| 1209 current_offset = cb->code_size(); | |
| 1210 } | |
| 1211 | |
| 1212 // Remember the start of the last call in a basic block | |
| 1213 if (is_mcall) { | |
| 1214 MachCallNode *mcall = mach->as_MachCall(); | |
| 1215 | |
| 1216 // This destination address is NOT PC-relative | |
| 1217 mcall->method_set((intptr_t)mcall->entry_point()); | |
| 1218 | |
| 1219 // Save the return address | |
| 1220 call_returns[b->_pre_order] = current_offset + mcall->ret_addr_offset(); | |
| 1221 | |
| 1222 if (!mcall->is_safepoint_node()) { | |
| 1223 is_mcall = false; | |
| 1224 is_sfn = false; | |
| 1225 } | |
| 1226 } | |
| 1227 | |
| 1228 // sfn will be valid whenever mcall is valid now because of inheritance | |
| 1229 if( is_sfn || is_mcall ) { | |
| 1230 | |
| 1231 // Handle special safepoint nodes for synchronization | |
| 1232 if( !is_mcall ) { | |
| 1233 MachSafePointNode *sfn = mach->as_MachSafePoint(); | |
| 1234 // !!!!! Stubs only need an oopmap right now, so bail out | |
| 1235 if( sfn->jvms()->method() == NULL) { | |
| 1236 // Write the oopmap directly to the code blob??!! | |
| 1237 # ifdef ENABLE_ZAP_DEAD_LOCALS | |
| 1238 assert( !is_node_getting_a_safepoint(sfn), "logic does not match; false positive"); | |
| 1239 # endif | |
| 1240 continue; | |
| 1241 } | |
| 1242 } // End synchronization | |
| 1243 | |
| 1244 non_safepoints.observe_safepoint(mach->as_MachSafePoint()->jvms(), | |
| 1245 current_offset); | |
| 1246 Process_OopMap_Node(mach, current_offset); | |
| 1247 } // End if safepoint | |
| 1248 | |
| 1249 // If this is a null check, then add the start of the previous instruction to the list | |
| 1250 else if( mach->is_MachNullCheck() ) { | |
| 1251 inct_starts[inct_cnt++] = previous_offset; | |
| 1252 } | |
| 1253 | |
| 1254 // If this is a branch, then fill in the label with the target BB's label | |
| 1255 else if ( mach->is_Branch() ) { | |
| 1256 | |
| 1257 if ( mach->ideal_Opcode() == Op_Jump ) { | |
| 1258 for (uint h = 0; h < b->_num_succs; h++ ) { | |
| 1259 Block* succs_block = b->_succs[h]; | |
| 1260 for (uint j = 1; j < succs_block->num_preds(); j++) { | |
| 1261 Node* jpn = succs_block->pred(j); | |
| 1262 if ( jpn->is_JumpProj() && jpn->in(0) == mach ) { | |
| 1263 uint block_num = succs_block->non_connector()->_pre_order; | |
| 1264 Label *blkLabel = &blk_labels[block_num]; | |
| 1265 mach->add_case_label(jpn->as_JumpProj()->proj_no(), blkLabel); | |
| 1266 } | |
| 1267 } | |
| 1268 } | |
| 1269 } else { | |
| 1270 // For Branchs | |
| 1271 // This requires the TRUE branch target be in succs[0] | |
| 1272 uint block_num = b->non_connector_successor(0)->_pre_order; | |
| 1273 mach->label_set( blk_labels[block_num], block_num ); | |
| 1274 } | |
| 1275 } | |
| 1276 | |
| 1277 #ifdef ASSERT | |
| 605 | 1278 // Check that oop-store precedes the card-mark |
| 0 | 1279 else if( mach->ideal_Opcode() == Op_StoreCM ) { |
| 1280 uint storeCM_idx = j; | |
| 1281 Node *oop_store = mach->in(mach->_cnt); // First precedence edge | |
| 1282 assert( oop_store != NULL, "storeCM expects a precedence edge"); | |
| 1283 uint i4; | |
| 1284 for( i4 = 0; i4 < last_inst; ++i4 ) { | |
| 1285 if( b->_nodes[i4] == oop_store ) break; | |
| 1286 } | |
| 1287 // Note: This test can provide a false failure if other precedence | |
| 1288 // edges have been added to the storeCMNode. | |
| 1289 assert( i4 == last_inst || i4 < storeCM_idx, "CM card-mark executes before oop-store"); | |
| 1290 } | |
| 1291 #endif | |
| 1292 | |
| 1293 else if( !n->is_Proj() ) { | |
| 605 | 1294 // Remember the beginning of the previous instruction, in case |
| 0 | 1295 // it's followed by a flag-kill and a null-check. Happens on |
| 1296 // Intel all the time, with add-to-memory kind of opcodes. | |
| 1297 previous_offset = current_offset; | |
| 1298 } | |
| 1299 } | |
| 1300 | |
| 1301 // Verify that there is sufficient space remaining | |
| 1302 cb->insts()->maybe_expand_to_ensure_remaining(MAX_inst_size); | |
| 1303 if (cb->blob() == NULL) { | |
| 1304 turn_off_compiler(this); | |
| 1305 return; | |
| 1306 } | |
| 1307 | |
| 1308 // Save the offset for the listing | |
| 1309 #ifndef PRODUCT | |
| 1310 if( node_offsets && n->_idx < node_offset_limit ) | |
| 1311 node_offsets[n->_idx] = cb->code_size(); | |
| 1312 #endif | |
| 1313 | |
| 1314 // "Normal" instruction case | |
| 1315 n->emit(*cb, _regalloc); | |
| 1316 current_offset = cb->code_size(); | |
| 1317 non_safepoints.observe_instruction(n, current_offset); | |
| 1318 | |
| 1319 // mcall is last "call" that can be a safepoint | |
| 1320 // record it so we can see if a poll will directly follow it | |
| 1321 // in which case we'll need a pad to make the PcDesc sites unique | |
| 1322 // see 5010568. This can be slightly inaccurate but conservative | |
| 1323 // in the case that return address is not actually at current_offset. | |
| 1324 // This is a small price to pay. | |
| 1325 | |
| 1326 if (is_mcall) { | |
| 1327 last_call_offset = current_offset; | |
| 1328 } | |
| 1329 | |
| 1330 // See if this instruction has a delay slot | |
| 1331 if ( valid_bundle_info(n) && node_bundling(n)->use_unconditional_delay()) { | |
| 1332 assert(delay_slot != NULL, "expecting delay slot node"); | |
| 1333 | |
| 1334 // Back up 1 instruction | |
| 1335 cb->set_code_end( | |
| 1336 cb->code_end()-Pipeline::instr_unit_size()); | |
| 1337 | |
| 1338 // Save the offset for the listing | |
| 1339 #ifndef PRODUCT | |
| 1340 if( node_offsets && delay_slot->_idx < node_offset_limit ) | |
| 1341 node_offsets[delay_slot->_idx] = cb->code_size(); | |
| 1342 #endif | |
| 1343 | |
| 1344 // Support a SafePoint in the delay slot | |
| 1345 if( delay_slot->is_MachSafePoint() ) { | |
| 1346 MachNode *mach = delay_slot->as_Mach(); | |
| 1347 // !!!!! Stubs only need an oopmap right now, so bail out | |
| 1348 if( !mach->is_MachCall() && mach->as_MachSafePoint()->jvms()->method() == NULL ) { | |
| 1349 // Write the oopmap directly to the code blob??!! | |
| 1350 # ifdef ENABLE_ZAP_DEAD_LOCALS | |
| 1351 assert( !is_node_getting_a_safepoint(mach), "logic does not match; false positive"); | |
| 1352 # endif | |
| 1353 delay_slot = NULL; | |
| 1354 continue; | |
| 1355 } | |
| 1356 | |
| 1357 int adjusted_offset = current_offset - Pipeline::instr_unit_size(); | |
| 1358 non_safepoints.observe_safepoint(mach->as_MachSafePoint()->jvms(), | |
| 1359 adjusted_offset); | |
| 1360 // Generate an OopMap entry | |
| 1361 Process_OopMap_Node(mach, adjusted_offset); | |
| 1362 } | |
| 1363 | |
| 1364 // Insert the delay slot instruction | |
| 1365 delay_slot->emit(*cb, _regalloc); | |
| 1366 | |
| 1367 // Don't reuse it | |
| 1368 delay_slot = NULL; | |
| 1369 } | |
| 1370 | |
| 1371 } // End for all instructions in block | |
| 1372 | |
| 418 | 1373 // If the next block is the top of a loop, pad this block out to align |
| 1374 // the loop top a little. Helps prevent pipe stalls at loop back branches. | |
| 0 | 1375 int nop_size = (new (this) MachNopNode())->size(_regalloc); |
| 1376 if( i<_cfg->_num_blocks-1 ) { | |
| 1377 Block *nb = _cfg->_blocks[i+1]; | |
| 1378 uint padding = nb->alignment_padding(current_offset); | |
| 1379 if( padding > 0 ) { | |
| 1380 MachNode *nop = new (this) MachNopNode(padding / nop_size); | |
| 1381 b->_nodes.insert( b->_nodes.size(), nop ); | |
| 1382 _cfg->_bbs.map( nop->_idx, b ); | |
| 1383 nop->emit(*cb, _regalloc); | |
| 1384 current_offset = cb->code_size(); | |
| 1385 } | |
| 1386 } | |
| 1387 | |
| 1388 } // End of for all blocks | |
| 1389 | |
| 1390 non_safepoints.flush_at_end(); | |
| 1391 | |
| 1392 // Offset too large? | |
| 1393 if (failing()) return; | |
| 1394 | |
| 1395 // Define a pseudo-label at the end of the code | |
| 1396 MacroAssembler(cb).bind( blk_labels[_cfg->_num_blocks] ); | |
| 1397 | |
| 1398 // Compute the size of the first block | |
| 1399 _first_block_size = blk_labels[1].loc_pos() - blk_labels[0].loc_pos(); | |
| 1400 | |
| 1401 assert(cb->code_size() < 500000, "method is unreasonably large"); | |
| 1402 | |
| 1403 // ------------------ | |
| 1404 | |
| 1405 #ifndef PRODUCT | |
| 1406 // Information on the size of the method, without the extraneous code | |
| 1407 Scheduling::increment_method_size(cb->code_size()); | |
| 1408 #endif | |
| 1409 | |
| 1410 // ------------------ | |
| 1411 // Fill in exception table entries. | |
| 1412 FillExceptionTables(inct_cnt, call_returns, inct_starts, blk_labels); | |
| 1413 | |
| 1414 // Only java methods have exception handlers and deopt handlers | |
| 1415 if (_method) { | |
| 1416 // Emit the exception handler code. | |
| 1417 _code_offsets.set_value(CodeOffsets::Exceptions, emit_exception_handler(*cb)); | |
| 1418 // Emit the deopt handler code. | |
| 1419 _code_offsets.set_value(CodeOffsets::Deopt, emit_deopt_handler(*cb)); | |
| 1420 } | |
| 1421 | |
| 1422 // One last check for failed CodeBuffer::expand: | |
| 1423 if (cb->blob() == NULL) { | |
| 1424 turn_off_compiler(this); | |
| 1425 return; | |
| 1426 } | |
| 1427 | |
| 1428 #ifndef PRODUCT | |
| 1429 // Dump the assembly code, including basic-block numbers | |
| 1430 if (print_assembly()) { | |
| 1431 ttyLocker ttyl; // keep the following output all in one block | |
| 1432 if (!VMThread::should_terminate()) { // test this under the tty lock | |
| 1433 // This output goes directly to the tty, not the compiler log. | |
| 1434 // To enable tools to match it up with the compilation activity, | |
| 1435 // be sure to tag this tty output with the compile ID. | |
| 1436 if (xtty != NULL) { | |
| 1437 xtty->head("opto_assembly compile_id='%d'%s", compile_id(), | |
| 1438 is_osr_compilation() ? " compile_kind='osr'" : | |
| 1439 ""); | |
| 1440 } | |
| 1441 if (method() != NULL) { | |
| 1442 method()->print_oop(); | |
| 1443 print_codes(); | |
| 1444 } | |
| 1445 dump_asm(node_offsets, node_offset_limit); | |
| 1446 if (xtty != NULL) { | |
| 1447 xtty->tail("opto_assembly"); | |
| 1448 } | |
| 1449 } | |
| 1450 } | |
| 1451 #endif | |
| 1452 | |
| 1453 } | |
| 1454 | |
| 1455 void Compile::FillExceptionTables(uint cnt, uint *call_returns, uint *inct_starts, Label *blk_labels) { | |
| 1456 _inc_table.set_size(cnt); | |
| 1457 | |
| 1458 uint inct_cnt = 0; | |
| 1459 for( uint i=0; i<_cfg->_num_blocks; i++ ) { | |
| 1460 Block *b = _cfg->_blocks[i]; | |
| 1461 Node *n = NULL; | |
| 1462 int j; | |
| 1463 | |
| 1464 // Find the branch; ignore trailing NOPs. | |
| 1465 for( j = b->_nodes.size()-1; j>=0; j-- ) { | |
| 1466 n = b->_nodes[j]; | |
| 1467 if( !n->is_Mach() || n->as_Mach()->ideal_Opcode() != Op_Con ) | |
| 1468 break; | |
| 1469 } | |
| 1470 | |
| 1471 // If we didn't find anything, continue | |
| 1472 if( j < 0 ) continue; | |
| 1473 | |
| 1474 // Compute ExceptionHandlerTable subtable entry and add it | |
| 1475 // (skip empty blocks) | |
| 1476 if( n->is_Catch() ) { | |
| 1477 | |
| 1478 // Get the offset of the return from the call | |
| 1479 uint call_return = call_returns[b->_pre_order]; | |
| 1480 #ifdef ASSERT | |
| 1481 assert( call_return > 0, "no call seen for this basic block" ); | |
| 1482 while( b->_nodes[--j]->Opcode() == Op_MachProj ) ; | |
| 1483 assert( b->_nodes[j]->is_Call(), "CatchProj must follow call" ); | |
| 1484 #endif | |
| 1485 // last instruction is a CatchNode, find it's CatchProjNodes | |
| 1486 int nof_succs = b->_num_succs; | |
| 1487 // allocate space | |
| 1488 GrowableArray<intptr_t> handler_bcis(nof_succs); | |
| 1489 GrowableArray<intptr_t> handler_pcos(nof_succs); | |
| 1490 // iterate through all successors | |
| 1491 for (int j = 0; j < nof_succs; j++) { | |
| 1492 Block* s = b->_succs[j]; | |
| 1493 bool found_p = false; | |
| 1494 for( uint k = 1; k < s->num_preds(); k++ ) { | |
| 1495 Node *pk = s->pred(k); | |
| 1496 if( pk->is_CatchProj() && pk->in(0) == n ) { | |
| 1497 const CatchProjNode* p = pk->as_CatchProj(); | |
| 1498 found_p = true; | |
| 1499 // add the corresponding handler bci & pco information | |
| 1500 if( p->_con != CatchProjNode::fall_through_index ) { | |
| 1501 // p leads to an exception handler (and is not fall through) | |
| 1502 assert(s == _cfg->_blocks[s->_pre_order],"bad numbering"); | |
| 1503 // no duplicates, please | |
| 1504 if( !handler_bcis.contains(p->handler_bci()) ) { | |
| 1505 uint block_num = s->non_connector()->_pre_order; | |
| 1506 handler_bcis.append(p->handler_bci()); | |
| 1507 handler_pcos.append(blk_labels[block_num].loc_pos()); | |
| 1508 } | |
| 1509 } | |
| 1510 } | |
| 1511 } | |
| 1512 assert(found_p, "no matching predecessor found"); | |
| 1513 // Note: Due to empty block removal, one block may have | |
| 1514 // several CatchProj inputs, from the same Catch. | |
| 1515 } | |
| 1516 | |
| 1517 // Set the offset of the return from the call | |
| 1518 _handler_table.add_subtable(call_return, &handler_bcis, NULL, &handler_pcos); | |
| 1519 continue; | |
| 1520 } | |
| 1521 | |
| 1522 // Handle implicit null exception table updates | |
| 1523 if( n->is_MachNullCheck() ) { | |
| 1524 uint block_num = b->non_connector_successor(0)->_pre_order; | |
| 1525 _inc_table.append( inct_starts[inct_cnt++], blk_labels[block_num].loc_pos() ); | |
| 1526 continue; | |
| 1527 } | |
| 1528 } // End of for all blocks fill in exception table entries | |
| 1529 } | |
| 1530 | |
| 1531 // Static Variables | |
| 1532 #ifndef PRODUCT | |
| 1533 uint Scheduling::_total_nop_size = 0; | |
| 1534 uint Scheduling::_total_method_size = 0; | |
| 1535 uint Scheduling::_total_branches = 0; | |
| 1536 uint Scheduling::_total_unconditional_delays = 0; | |
| 1537 uint Scheduling::_total_instructions_per_bundle[Pipeline::_max_instrs_per_cycle+1]; | |
| 1538 #endif | |
| 1539 | |
| 1540 // Initializer for class Scheduling | |
| 1541 | |
| 1542 Scheduling::Scheduling(Arena *arena, Compile &compile) | |
| 1543 : _arena(arena), | |
| 1544 _cfg(compile.cfg()), | |
| 1545 _bbs(compile.cfg()->_bbs), | |
| 1546 _regalloc(compile.regalloc()), | |
| 1547 _reg_node(arena), | |
| 1548 _bundle_instr_count(0), | |
| 1549 _bundle_cycle_number(0), | |
| 1550 _scheduled(arena), | |
| 1551 _available(arena), | |
| 1552 _next_node(NULL), | |
| 1553 _bundle_use(0, 0, resource_count, &_bundle_use_elements[0]), | |
| 1554 _pinch_free_list(arena) | |
| 1555 #ifndef PRODUCT | |
| 1556 , _branches(0) | |
| 1557 , _unconditional_delays(0) | |
| 1558 #endif | |
| 1559 { | |
| 1560 // Create a MachNopNode | |
| 1561 _nop = new (&compile) MachNopNode(); | |
| 1562 | |
| 1563 // Now that the nops are in the array, save the count | |
| 1564 // (but allow entries for the nops) | |
| 1565 _node_bundling_limit = compile.unique(); | |
| 1566 uint node_max = _regalloc->node_regs_max_index(); | |
| 1567 | |
| 1568 compile.set_node_bundling_limit(_node_bundling_limit); | |
| 1569 | |
| 605 | 1570 // This one is persistent within the Compile class |
| 0 | 1571 _node_bundling_base = NEW_ARENA_ARRAY(compile.comp_arena(), Bundle, node_max); |
| 1572 | |
| 1573 // Allocate space for fixed-size arrays | |
| 1574 _node_latency = NEW_ARENA_ARRAY(arena, unsigned short, node_max); | |
| 1575 _uses = NEW_ARENA_ARRAY(arena, short, node_max); | |
| 1576 _current_latency = NEW_ARENA_ARRAY(arena, unsigned short, node_max); | |
| 1577 | |
| 1578 // Clear the arrays | |
| 1579 memset(_node_bundling_base, 0, node_max * sizeof(Bundle)); | |
| 1580 memset(_node_latency, 0, node_max * sizeof(unsigned short)); | |
| 1581 memset(_uses, 0, node_max * sizeof(short)); | |
| 1582 memset(_current_latency, 0, node_max * sizeof(unsigned short)); | |
| 1583 | |
| 1584 // Clear the bundling information | |
| 1585 memcpy(_bundle_use_elements, | |
| 1586 Pipeline_Use::elaborated_elements, | |
| 1587 sizeof(Pipeline_Use::elaborated_elements)); | |
| 1588 | |
| 1589 // Get the last node | |
| 1590 Block *bb = _cfg->_blocks[_cfg->_blocks.size()-1]; | |
| 1591 | |
| 1592 _next_node = bb->_nodes[bb->_nodes.size()-1]; | |
| 1593 } | |
| 1594 | |
| 1595 #ifndef PRODUCT | |
| 1596 // Scheduling destructor | |
| 1597 Scheduling::~Scheduling() { | |
| 1598 _total_branches += _branches; | |
| 1599 _total_unconditional_delays += _unconditional_delays; | |
| 1600 } | |
| 1601 #endif | |
| 1602 | |
| 1603 // Step ahead "i" cycles | |
| 1604 void Scheduling::step(uint i) { | |
| 1605 | |
| 1606 Bundle *bundle = node_bundling(_next_node); | |
| 1607 bundle->set_starts_bundle(); | |
| 1608 | |
| 1609 // Update the bundle record, but leave the flags information alone | |
| 1610 if (_bundle_instr_count > 0) { | |
| 1611 bundle->set_instr_count(_bundle_instr_count); | |
| 1612 bundle->set_resources_used(_bundle_use.resourcesUsed()); | |
| 1613 } | |
| 1614 | |
| 1615 // Update the state information | |
| 1616 _bundle_instr_count = 0; | |
| 1617 _bundle_cycle_number += i; | |
| 1618 _bundle_use.step(i); | |
| 1619 } | |
| 1620 | |
| 1621 void Scheduling::step_and_clear() { | |
| 1622 Bundle *bundle = node_bundling(_next_node); | |
| 1623 bundle->set_starts_bundle(); | |
| 1624 | |
| 1625 // Update the bundle record | |
| 1626 if (_bundle_instr_count > 0) { | |
| 1627 bundle->set_instr_count(_bundle_instr_count); | |
| 1628 bundle->set_resources_used(_bundle_use.resourcesUsed()); | |
| 1629 | |
| 1630 _bundle_cycle_number += 1; | |
| 1631 } | |
| 1632 | |
| 1633 // Clear the bundling information | |
| 1634 _bundle_instr_count = 0; | |
| 1635 _bundle_use.reset(); | |
| 1636 | |
| 1637 memcpy(_bundle_use_elements, | |
| 1638 Pipeline_Use::elaborated_elements, | |
| 1639 sizeof(Pipeline_Use::elaborated_elements)); | |
| 1640 } | |
| 1641 | |
| 1642 //------------------------------ScheduleAndBundle------------------------------ | |
| 1643 // Perform instruction scheduling and bundling over the sequence of | |
| 1644 // instructions in backwards order. | |
| 1645 void Compile::ScheduleAndBundle() { | |
| 1646 | |
| 1647 // Don't optimize this if it isn't a method | |
| 1648 if (!_method) | |
| 1649 return; | |
| 1650 | |
| 1651 // Don't optimize this if scheduling is disabled | |
| 1652 if (!do_scheduling()) | |
| 1653 return; | |
| 1654 | |
| 1655 NOT_PRODUCT( TracePhase t2("isched", &_t_instrSched, TimeCompiler); ) | |
| 1656 | |
| 1657 // Create a data structure for all the scheduling information | |
| 1658 Scheduling scheduling(Thread::current()->resource_area(), *this); | |
| 1659 | |
| 1660 // Walk backwards over each basic block, computing the needed alignment | |
| 1661 // Walk over all the basic blocks | |
| 1662 scheduling.DoScheduling(); | |
| 1663 } | |
| 1664 | |
| 1665 //------------------------------ComputeLocalLatenciesForward------------------- | |
| 1666 // Compute the latency of all the instructions. This is fairly simple, | |
| 1667 // because we already have a legal ordering. Walk over the instructions | |
| 1668 // from first to last, and compute the latency of the instruction based | |
| 605 | 1669 // on the latency of the preceding instruction(s). |
| 0 | 1670 void Scheduling::ComputeLocalLatenciesForward(const Block *bb) { |
| 1671 #ifndef PRODUCT | |
| 1672 if (_cfg->C->trace_opto_output()) | |
| 1673 tty->print("# -> ComputeLocalLatenciesForward\n"); | |
| 1674 #endif | |
| 1675 | |
| 1676 // Walk over all the schedulable instructions | |
| 1677 for( uint j=_bb_start; j < _bb_end; j++ ) { | |
| 1678 | |
| 1679 // This is a kludge, forcing all latency calculations to start at 1. | |
| 1680 // Used to allow latency 0 to force an instruction to the beginning | |
| 1681 // of the bb | |
| 1682 uint latency = 1; | |
| 1683 Node *use = bb->_nodes[j]; | |
| 1684 uint nlen = use->len(); | |
| 1685 | |
| 1686 // Walk over all the inputs | |
| 1687 for ( uint k=0; k < nlen; k++ ) { | |
| 1688 Node *def = use->in(k); | |
| 1689 if (!def) | |
| 1690 continue; | |
| 1691 | |
| 1692 uint l = _node_latency[def->_idx] + use->latency(k); | |
| 1693 if (latency < l) | |
| 1694 latency = l; | |
| 1695 } | |
| 1696 | |
| 1697 _node_latency[use->_idx] = latency; | |
| 1698 | |
| 1699 #ifndef PRODUCT | |
| 1700 if (_cfg->C->trace_opto_output()) { | |
| 1701 tty->print("# latency %4d: ", latency); | |
| 1702 use->dump(); | |
| 1703 } | |
| 1704 #endif | |
| 1705 } | |
| 1706 | |
| 1707 #ifndef PRODUCT | |
| 1708 if (_cfg->C->trace_opto_output()) | |
| 1709 tty->print("# <- ComputeLocalLatenciesForward\n"); | |
| 1710 #endif | |
| 1711 | |
| 1712 } // end ComputeLocalLatenciesForward | |
| 1713 | |
| 1714 // See if this node fits into the present instruction bundle | |
| 1715 bool Scheduling::NodeFitsInBundle(Node *n) { | |
| 1716 uint n_idx = n->_idx; | |
| 1717 | |
| 1718 // If this is the unconditional delay instruction, then it fits | |
| 1719 if (n == _unconditional_delay_slot) { | |
| 1720 #ifndef PRODUCT | |
| 1721 if (_cfg->C->trace_opto_output()) | |
| 1722 tty->print("# NodeFitsInBundle [%4d]: TRUE; is in unconditional delay slot\n", n->_idx); | |
| 1723 #endif | |
| 1724 return (true); | |
| 1725 } | |
| 1726 | |
| 1727 // If the node cannot be scheduled this cycle, skip it | |
| 1728 if (_current_latency[n_idx] > _bundle_cycle_number) { | |
| 1729 #ifndef PRODUCT | |
| 1730 if (_cfg->C->trace_opto_output()) | |
| 1731 tty->print("# NodeFitsInBundle [%4d]: FALSE; latency %4d > %d\n", | |
| 1732 n->_idx, _current_latency[n_idx], _bundle_cycle_number); | |
| 1733 #endif | |
| 1734 return (false); | |
| 1735 } | |
| 1736 | |
| 1737 const Pipeline *node_pipeline = n->pipeline(); | |
| 1738 | |
| 1739 uint instruction_count = node_pipeline->instructionCount(); | |
| 1740 if (node_pipeline->mayHaveNoCode() && n->size(_regalloc) == 0) | |
| 1741 instruction_count = 0; | |
| 1742 else if (node_pipeline->hasBranchDelay() && !_unconditional_delay_slot) | |
| 1743 instruction_count++; | |
| 1744 | |
| 1745 if (_bundle_instr_count + instruction_count > Pipeline::_max_instrs_per_cycle) { | |
| 1746 #ifndef PRODUCT | |
| 1747 if (_cfg->C->trace_opto_output()) | |
| 1748 tty->print("# NodeFitsInBundle [%4d]: FALSE; too many instructions: %d > %d\n", | |
| 1749 n->_idx, _bundle_instr_count + instruction_count, Pipeline::_max_instrs_per_cycle); | |
| 1750 #endif | |
| 1751 return (false); | |
| 1752 } | |
| 1753 | |
| 1754 // Don't allow non-machine nodes to be handled this way | |
| 1755 if (!n->is_Mach() && instruction_count == 0) | |
| 1756 return (false); | |
| 1757 | |
| 1758 // See if there is any overlap | |
| 1759 uint delay = _bundle_use.full_latency(0, node_pipeline->resourceUse()); | |
| 1760 | |
| 1761 if (delay > 0) { | |
| 1762 #ifndef PRODUCT | |
| 1763 if (_cfg->C->trace_opto_output()) | |
| 1764 tty->print("# NodeFitsInBundle [%4d]: FALSE; functional units overlap\n", n_idx); | |
| 1765 #endif | |
| 1766 return false; | |
| 1767 } | |
| 1768 | |
| 1769 #ifndef PRODUCT | |
| 1770 if (_cfg->C->trace_opto_output()) | |
| 1771 tty->print("# NodeFitsInBundle [%4d]: TRUE\n", n_idx); | |
| 1772 #endif | |
| 1773 | |
| 1774 return true; | |
| 1775 } | |
| 1776 | |
| 1777 Node * Scheduling::ChooseNodeToBundle() { | |
| 1778 uint siz = _available.size(); | |
| 1779 | |
| 1780 if (siz == 0) { | |
| 1781 | |
| 1782 #ifndef PRODUCT | |
| 1783 if (_cfg->C->trace_opto_output()) | |
| 1784 tty->print("# ChooseNodeToBundle: NULL\n"); | |
| 1785 #endif | |
| 1786 return (NULL); | |
| 1787 } | |
| 1788 | |
| 1789 // Fast path, if only 1 instruction in the bundle | |
| 1790 if (siz == 1) { | |
| 1791 #ifndef PRODUCT | |
| 1792 if (_cfg->C->trace_opto_output()) { | |
| 1793 tty->print("# ChooseNodeToBundle (only 1): "); | |
| 1794 _available[0]->dump(); | |
| 1795 } | |
| 1796 #endif | |
| 1797 return (_available[0]); | |
| 1798 } | |
| 1799 | |
| 1800 // Don't bother, if the bundle is already full | |
| 1801 if (_bundle_instr_count < Pipeline::_max_instrs_per_cycle) { | |
| 1802 for ( uint i = 0; i < siz; i++ ) { | |
| 1803 Node *n = _available[i]; | |
| 1804 | |
| 1805 // Skip projections, we'll handle them another way | |
| 1806 if (n->is_Proj()) | |
| 1807 continue; | |
| 1808 | |
| 1809 // This presupposed that instructions are inserted into the | |
| 1810 // available list in a legality order; i.e. instructions that | |
| 1811 // must be inserted first are at the head of the list | |
| 1812 if (NodeFitsInBundle(n)) { | |
| 1813 #ifndef PRODUCT | |
| 1814 if (_cfg->C->trace_opto_output()) { | |
| 1815 tty->print("# ChooseNodeToBundle: "); | |
| 1816 n->dump(); | |
| 1817 } | |
| 1818 #endif | |
| 1819 return (n); | |
| 1820 } | |
| 1821 } | |
| 1822 } | |
| 1823 | |
| 1824 // Nothing fits in this bundle, choose the highest priority | |
| 1825 #ifndef PRODUCT | |
| 1826 if (_cfg->C->trace_opto_output()) { | |
| 1827 tty->print("# ChooseNodeToBundle: "); | |
| 1828 _available[0]->dump(); | |
| 1829 } | |
| 1830 #endif | |
| 1831 | |
| 1832 return _available[0]; | |
| 1833 } | |
| 1834 | |
| 1835 //------------------------------AddNodeToAvailableList------------------------- | |
| 1836 void Scheduling::AddNodeToAvailableList(Node *n) { | |
| 1837 assert( !n->is_Proj(), "projections never directly made available" ); | |
| 1838 #ifndef PRODUCT | |
| 1839 if (_cfg->C->trace_opto_output()) { | |
| 1840 tty->print("# AddNodeToAvailableList: "); | |
| 1841 n->dump(); | |
| 1842 } | |
| 1843 #endif | |
| 1844 | |
| 1845 int latency = _current_latency[n->_idx]; | |
| 1846 | |
| 1847 // Insert in latency order (insertion sort) | |
| 1848 uint i; | |
| 1849 for ( i=0; i < _available.size(); i++ ) | |
| 1850 if (_current_latency[_available[i]->_idx] > latency) | |
| 1851 break; | |
| 1852 | |
| 1853 // Special Check for compares following branches | |
| 1854 if( n->is_Mach() && _scheduled.size() > 0 ) { | |
| 1855 int op = n->as_Mach()->ideal_Opcode(); | |
| 1856 Node *last = _scheduled[0]; | |
| 1857 if( last->is_MachIf() && last->in(1) == n && | |
| 1858 ( op == Op_CmpI || | |
| 1859 op == Op_CmpU || | |
| 1860 op == Op_CmpP || | |
| 1861 op == Op_CmpF || | |
| 1862 op == Op_CmpD || | |
| 1863 op == Op_CmpL ) ) { | |
| 1864 | |
| 1865 // Recalculate position, moving to front of same latency | |
| 1866 for ( i=0 ; i < _available.size(); i++ ) | |
| 1867 if (_current_latency[_available[i]->_idx] >= latency) | |
| 1868 break; | |
| 1869 } | |
| 1870 } | |
| 1871 | |
| 1872 // Insert the node in the available list | |
| 1873 _available.insert(i, n); | |
| 1874 | |
| 1875 #ifndef PRODUCT | |
| 1876 if (_cfg->C->trace_opto_output()) | |
| 1877 dump_available(); | |
| 1878 #endif | |
| 1879 } | |
| 1880 | |
| 1881 //------------------------------DecrementUseCounts----------------------------- | |
| 1882 void Scheduling::DecrementUseCounts(Node *n, const Block *bb) { | |
| 1883 for ( uint i=0; i < n->len(); i++ ) { | |
| 1884 Node *def = n->in(i); | |
| 1885 if (!def) continue; | |
| 1886 if( def->is_Proj() ) // If this is a machine projection, then | |
| 1887 def = def->in(0); // propagate usage thru to the base instruction | |
| 1888 | |
| 1889 if( _bbs[def->_idx] != bb ) // Ignore if not block-local | |
| 1890 continue; | |
| 1891 | |
| 1892 // Compute the latency | |
| 1893 uint l = _bundle_cycle_number + n->latency(i); | |
| 1894 if (_current_latency[def->_idx] < l) | |
| 1895 _current_latency[def->_idx] = l; | |
| 1896 | |
| 1897 // If this does not have uses then schedule it | |
| 1898 if ((--_uses[def->_idx]) == 0) | |
| 1899 AddNodeToAvailableList(def); | |
| 1900 } | |
| 1901 } | |
| 1902 | |
| 1903 //------------------------------AddNodeToBundle-------------------------------- | |
| 1904 void Scheduling::AddNodeToBundle(Node *n, const Block *bb) { | |
| 1905 #ifndef PRODUCT | |
| 1906 if (_cfg->C->trace_opto_output()) { | |
| 1907 tty->print("# AddNodeToBundle: "); | |
| 1908 n->dump(); | |
| 1909 } | |
| 1910 #endif | |
| 1911 | |
| 1912 // Remove this from the available list | |
| 1913 uint i; | |
| 1914 for (i = 0; i < _available.size(); i++) | |
| 1915 if (_available[i] == n) | |
| 1916 break; | |
| 1917 assert(i < _available.size(), "entry in _available list not found"); | |
| 1918 _available.remove(i); | |
| 1919 | |
| 1920 // See if this fits in the current bundle | |
| 1921 const Pipeline *node_pipeline = n->pipeline(); | |
| 1922 const Pipeline_Use& node_usage = node_pipeline->resourceUse(); | |
| 1923 | |
| 1924 // Check for instructions to be placed in the delay slot. We | |
| 1925 // do this before we actually schedule the current instruction, | |
| 1926 // because the delay slot follows the current instruction. | |
| 1927 if (Pipeline::_branch_has_delay_slot && | |
| 1928 node_pipeline->hasBranchDelay() && | |
| 1929 !_unconditional_delay_slot) { | |
| 1930 | |
| 1931 uint siz = _available.size(); | |
| 1932 | |
| 1933 // Conditional branches can support an instruction that | |
| 605 | 1934 // is unconditionally executed and not dependent by the |
| 0 | 1935 // branch, OR a conditionally executed instruction if |
| 1936 // the branch is taken. In practice, this means that | |
| 1937 // the first instruction at the branch target is | |
| 1938 // copied to the delay slot, and the branch goes to | |
| 1939 // the instruction after that at the branch target | |
| 1940 if ( n->is_Mach() && n->is_Branch() ) { | |
| 1941 | |
| 1942 assert( !n->is_MachNullCheck(), "should not look for delay slot for Null Check" ); | |
| 1943 assert( !n->is_Catch(), "should not look for delay slot for Catch" ); | |
| 1944 | |
| 1945 #ifndef PRODUCT | |
| 1946 _branches++; | |
| 1947 #endif | |
| 1948 | |
| 1949 // At least 1 instruction is on the available list | |
| 605 | 1950 // that is not dependent on the branch |
| 0 | 1951 for (uint i = 0; i < siz; i++) { |
| 1952 Node *d = _available[i]; | |
| 1953 const Pipeline *avail_pipeline = d->pipeline(); | |
| 1954 | |
| 1955 // Don't allow safepoints in the branch shadow, that will | |
| 1956 // cause a number of difficulties | |
| 1957 if ( avail_pipeline->instructionCount() == 1 && | |
| 1958 !avail_pipeline->hasMultipleBundles() && | |
| 1959 !avail_pipeline->hasBranchDelay() && | |
| 1960 Pipeline::instr_has_unit_size() && | |
| 1961 d->size(_regalloc) == Pipeline::instr_unit_size() && | |
| 1962 NodeFitsInBundle(d) && | |
| 1963 !node_bundling(d)->used_in_delay()) { | |
| 1964 | |
| 1965 if (d->is_Mach() && !d->is_MachSafePoint()) { | |
| 1966 // A node that fits in the delay slot was found, so we need to | |
| 1967 // set the appropriate bits in the bundle pipeline information so | |
| 1968 // that it correctly indicates resource usage. Later, when we | |
| 1969 // attempt to add this instruction to the bundle, we will skip | |
| 1970 // setting the resource usage. | |
| 1971 _unconditional_delay_slot = d; | |
| 1972 node_bundling(n)->set_use_unconditional_delay(); | |
| 1973 node_bundling(d)->set_used_in_unconditional_delay(); | |
| 1974 _bundle_use.add_usage(avail_pipeline->resourceUse()); | |
| 1975 _current_latency[d->_idx] = _bundle_cycle_number; | |
| 1976 _next_node = d; | |
| 1977 ++_bundle_instr_count; | |
| 1978 #ifndef PRODUCT | |
| 1979 _unconditional_delays++; | |
| 1980 #endif | |
| 1981 break; | |
| 1982 } | |
| 1983 } | |
| 1984 } | |
| 1985 } | |
| 1986 | |
| 1987 // No delay slot, add a nop to the usage | |
| 1988 if (!_unconditional_delay_slot) { | |
| 1989 // See if adding an instruction in the delay slot will overflow | |
| 1990 // the bundle. | |
| 1991 if (!NodeFitsInBundle(_nop)) { | |
| 1992 #ifndef PRODUCT | |
| 1993 if (_cfg->C->trace_opto_output()) | |
| 1994 tty->print("# *** STEP(1 instruction for delay slot) ***\n"); | |
| 1995 #endif | |
| 1996 step(1); | |
| 1997 } | |
| 1998 | |
| 1999 _bundle_use.add_usage(_nop->pipeline()->resourceUse()); | |
| 2000 _next_node = _nop; | |
| 2001 ++_bundle_instr_count; | |
| 2002 } | |
| 2003 | |
| 2004 // See if the instruction in the delay slot requires a | |
| 2005 // step of the bundles | |
| 2006 if (!NodeFitsInBundle(n)) { | |
| 2007 #ifndef PRODUCT | |
| 2008 if (_cfg->C->trace_opto_output()) | |
| 2009 tty->print("# *** STEP(branch won't fit) ***\n"); | |
| 2010 #endif | |
| 2011 // Update the state information | |
| 2012 _bundle_instr_count = 0; | |
| 2013 _bundle_cycle_number += 1; | |
| 2014 _bundle_use.step(1); | |
| 2015 } | |
| 2016 } | |
| 2017 | |
| 2018 // Get the number of instructions | |
| 2019 uint instruction_count = node_pipeline->instructionCount(); | |
| 2020 if (node_pipeline->mayHaveNoCode() && n->size(_regalloc) == 0) | |
| 2021 instruction_count = 0; | |
| 2022 | |
| 2023 // Compute the latency information | |
| 2024 uint delay = 0; | |
| 2025 | |
| 2026 if (instruction_count > 0 || !node_pipeline->mayHaveNoCode()) { | |
| 2027 int relative_latency = _current_latency[n->_idx] - _bundle_cycle_number; | |
| 2028 if (relative_latency < 0) | |
| 2029 relative_latency = 0; | |
| 2030 | |
| 2031 delay = _bundle_use.full_latency(relative_latency, node_usage); | |
| 2032 | |
| 2033 // Does not fit in this bundle, start a new one | |
| 2034 if (delay > 0) { | |
| 2035 step(delay); | |
| 2036 | |
| 2037 #ifndef PRODUCT | |
| 2038 if (_cfg->C->trace_opto_output()) | |
| 2039 tty->print("# *** STEP(%d) ***\n", delay); | |
| 2040 #endif | |
| 2041 } | |
| 2042 } | |
| 2043 | |
| 2044 // If this was placed in the delay slot, ignore it | |
| 2045 if (n != _unconditional_delay_slot) { | |
| 2046 | |
| 2047 if (delay == 0) { | |
| 2048 if (node_pipeline->hasMultipleBundles()) { | |
| 2049 #ifndef PRODUCT | |
| 2050 if (_cfg->C->trace_opto_output()) | |
| 2051 tty->print("# *** STEP(multiple instructions) ***\n"); | |
| 2052 #endif | |
| 2053 step(1); | |
| 2054 } | |
| 2055 | |
| 2056 else if (instruction_count + _bundle_instr_count > Pipeline::_max_instrs_per_cycle) { | |
| 2057 #ifndef PRODUCT | |
| 2058 if (_cfg->C->trace_opto_output()) | |
| 2059 tty->print("# *** STEP(%d >= %d instructions) ***\n", | |
| 2060 instruction_count + _bundle_instr_count, | |
| 2061 Pipeline::_max_instrs_per_cycle); | |
| 2062 #endif | |
| 2063 step(1); | |
| 2064 } | |
| 2065 } | |
| 2066 | |
| 2067 if (node_pipeline->hasBranchDelay() && !_unconditional_delay_slot) | |
| 2068 _bundle_instr_count++; | |
| 2069 | |
| 2070 // Set the node's latency | |
| 2071 _current_latency[n->_idx] = _bundle_cycle_number; | |
| 2072 | |
| 2073 // Now merge the functional unit information | |
| 2074 if (instruction_count > 0 || !node_pipeline->mayHaveNoCode()) | |
| 2075 _bundle_use.add_usage(node_usage); | |
| 2076 | |
| 2077 // Increment the number of instructions in this bundle | |
| 2078 _bundle_instr_count += instruction_count; | |
| 2079 | |
| 2080 // Remember this node for later | |
| 2081 if (n->is_Mach()) | |
| 2082 _next_node = n; | |
| 2083 } | |
| 2084 | |
| 2085 // It's possible to have a BoxLock in the graph and in the _bbs mapping but | |
| 2086 // not in the bb->_nodes array. This happens for debug-info-only BoxLocks. | |
| 2087 // 'Schedule' them (basically ignore in the schedule) but do not insert them | |
| 2088 // into the block. All other scheduled nodes get put in the schedule here. | |
| 2089 int op = n->Opcode(); | |
| 2090 if( (op == Op_Node && n->req() == 0) || // anti-dependence node OR | |
| 2091 (op != Op_Node && // Not an unused antidepedence node and | |
| 2092 // not an unallocated boxlock | |
| 2093 (OptoReg::is_valid(_regalloc->get_reg_first(n)) || op != Op_BoxLock)) ) { | |
| 2094 | |
| 2095 // Push any trailing projections | |
| 2096 if( bb->_nodes[bb->_nodes.size()-1] != n ) { | |
| 2097 for (DUIterator_Fast imax, i = n->fast_outs(imax); i < imax; i++) { | |
| 2098 Node *foi = n->fast_out(i); | |
| 2099 if( foi->is_Proj() ) | |
| 2100 _scheduled.push(foi); | |
| 2101 } | |
| 2102 } | |
| 2103 | |
| 2104 // Put the instruction in the schedule list | |
| 2105 _scheduled.push(n); | |
| 2106 } | |
| 2107 | |
| 2108 #ifndef PRODUCT | |
| 2109 if (_cfg->C->trace_opto_output()) | |
| 2110 dump_available(); | |
| 2111 #endif | |
| 2112 | |
| 2113 // Walk all the definitions, decrementing use counts, and | |
| 2114 // if a definition has a 0 use count, place it in the available list. | |
| 2115 DecrementUseCounts(n,bb); | |
| 2116 } | |
| 2117 | |
| 2118 //------------------------------ComputeUseCount-------------------------------- | |
| 2119 // This method sets the use count within a basic block. We will ignore all | |
| 2120 // uses outside the current basic block. As we are doing a backwards walk, | |
| 2121 // any node we reach that has a use count of 0 may be scheduled. This also | |
| 2122 // avoids the problem of cyclic references from phi nodes, as long as phi | |
| 2123 // nodes are at the front of the basic block. This method also initializes | |
| 2124 // the available list to the set of instructions that have no uses within this | |
| 2125 // basic block. | |
| 2126 void Scheduling::ComputeUseCount(const Block *bb) { | |
| 2127 #ifndef PRODUCT | |
| 2128 if (_cfg->C->trace_opto_output()) | |
| 2129 tty->print("# -> ComputeUseCount\n"); | |
| 2130 #endif | |
| 2131 | |
| 2132 // Clear the list of available and scheduled instructions, just in case | |
| 2133 _available.clear(); | |
| 2134 _scheduled.clear(); | |
| 2135 | |
| 2136 // No delay slot specified | |
| 2137 _unconditional_delay_slot = NULL; | |
| 2138 | |
| 2139 #ifdef ASSERT | |
| 2140 for( uint i=0; i < bb->_nodes.size(); i++ ) | |
| 2141 assert( _uses[bb->_nodes[i]->_idx] == 0, "_use array not clean" ); | |
| 2142 #endif | |
| 2143 | |
| 2144 // Force the _uses count to never go to zero for unscheduable pieces | |
| 2145 // of the block | |
| 2146 for( uint k = 0; k < _bb_start; k++ ) | |
| 2147 _uses[bb->_nodes[k]->_idx] = 1; | |
| 2148 for( uint l = _bb_end; l < bb->_nodes.size(); l++ ) | |
| 2149 _uses[bb->_nodes[l]->_idx] = 1; | |
| 2150 | |
| 2151 // Iterate backwards over the instructions in the block. Don't count the | |
| 2152 // branch projections at end or the block header instructions. | |
| 2153 for( uint j = _bb_end-1; j >= _bb_start; j-- ) { | |
| 2154 Node *n = bb->_nodes[j]; | |
| 2155 if( n->is_Proj() ) continue; // Projections handled another way | |
| 2156 | |
| 2157 // Account for all uses | |
| 2158 for ( uint k = 0; k < n->len(); k++ ) { | |
| 2159 Node *inp = n->in(k); | |
| 2160 if (!inp) continue; | |
| 2161 assert(inp != n, "no cycles allowed" ); | |
| 2162 if( _bbs[inp->_idx] == bb ) { // Block-local use? | |
| 2163 if( inp->is_Proj() ) // Skip through Proj's | |
| 2164 inp = inp->in(0); | |
| 2165 ++_uses[inp->_idx]; // Count 1 block-local use | |
| 2166 } | |
| 2167 } | |
| 2168 | |
| 2169 // If this instruction has a 0 use count, then it is available | |
| 2170 if (!_uses[n->_idx]) { | |
| 2171 _current_latency[n->_idx] = _bundle_cycle_number; | |
| 2172 AddNodeToAvailableList(n); | |
| 2173 } | |
| 2174 | |
| 2175 #ifndef PRODUCT | |
| 2176 if (_cfg->C->trace_opto_output()) { | |
| 2177 tty->print("# uses: %3d: ", _uses[n->_idx]); | |
| 2178 n->dump(); | |
| 2179 } | |
| 2180 #endif | |
| 2181 } | |
| 2182 | |
| 2183 #ifndef PRODUCT | |
| 2184 if (_cfg->C->trace_opto_output()) | |
| 2185 tty->print("# <- ComputeUseCount\n"); | |
| 2186 #endif | |
| 2187 } | |
| 2188 | |
| 2189 // This routine performs scheduling on each basic block in reverse order, | |
| 2190 // using instruction latencies and taking into account function unit | |
| 2191 // availability. | |
| 2192 void Scheduling::DoScheduling() { | |
| 2193 #ifndef PRODUCT | |
| 2194 if (_cfg->C->trace_opto_output()) | |
| 2195 tty->print("# -> DoScheduling\n"); | |
| 2196 #endif | |
| 2197 | |
| 2198 Block *succ_bb = NULL; | |
| 2199 Block *bb; | |
| 2200 | |
| 2201 // Walk over all the basic blocks in reverse order | |
| 2202 for( int i=_cfg->_num_blocks-1; i >= 0; succ_bb = bb, i-- ) { | |
| 2203 bb = _cfg->_blocks[i]; | |
| 2204 | |
| 2205 #ifndef PRODUCT | |
| 2206 if (_cfg->C->trace_opto_output()) { | |
| 2207 tty->print("# Schedule BB#%03d (initial)\n", i); | |
| 2208 for (uint j = 0; j < bb->_nodes.size(); j++) | |
| 2209 bb->_nodes[j]->dump(); | |
| 2210 } | |
| 2211 #endif | |
| 2212 | |
| 2213 // On the head node, skip processing | |
| 2214 if( bb == _cfg->_broot ) | |
| 2215 continue; | |
| 2216 | |
| 2217 // Skip empty, connector blocks | |
| 2218 if (bb->is_connector()) | |
| 2219 continue; | |
| 2220 | |
| 2221 // If the following block is not the sole successor of | |
| 2222 // this one, then reset the pipeline information | |
| 2223 if (bb->_num_succs != 1 || bb->non_connector_successor(0) != succ_bb) { | |
| 2224 #ifndef PRODUCT | |
| 2225 if (_cfg->C->trace_opto_output()) { | |
| 2226 tty->print("*** bundle start of next BB, node %d, for %d instructions\n", | |
| 2227 _next_node->_idx, _bundle_instr_count); | |
| 2228 } | |
| 2229 #endif | |
| 2230 step_and_clear(); | |
| 2231 } | |
| 2232 | |
| 2233 // Leave untouched the starting instruction, any Phis, a CreateEx node | |
| 2234 // or Top. bb->_nodes[_bb_start] is the first schedulable instruction. | |
| 2235 _bb_end = bb->_nodes.size()-1; | |
| 2236 for( _bb_start=1; _bb_start <= _bb_end; _bb_start++ ) { | |
| 2237 Node *n = bb->_nodes[_bb_start]; | |
| 2238 // Things not matched, like Phinodes and ProjNodes don't get scheduled. | |
| 2239 // Also, MachIdealNodes do not get scheduled | |
| 2240 if( !n->is_Mach() ) continue; // Skip non-machine nodes | |
| 2241 MachNode *mach = n->as_Mach(); | |
| 2242 int iop = mach->ideal_Opcode(); | |
| 2243 if( iop == Op_CreateEx ) continue; // CreateEx is pinned | |
| 2244 if( iop == Op_Con ) continue; // Do not schedule Top | |
| 2245 if( iop == Op_Node && // Do not schedule PhiNodes, ProjNodes | |
| 2246 mach->pipeline() == MachNode::pipeline_class() && | |
| 2247 !n->is_SpillCopy() ) // Breakpoints, Prolog, etc | |
| 2248 continue; | |
| 2249 break; // Funny loop structure to be sure... | |
| 2250 } | |
| 2251 // Compute last "interesting" instruction in block - last instruction we | |
| 2252 // might schedule. _bb_end points just after last schedulable inst. We | |
| 2253 // normally schedule conditional branches (despite them being forced last | |
| 2254 // in the block), because they have delay slots we can fill. Calls all | |
| 2255 // have their delay slots filled in the template expansions, so we don't | |
| 2256 // bother scheduling them. | |
| 2257 Node *last = bb->_nodes[_bb_end]; | |
| 2258 if( last->is_Catch() || | |
| 2259 (last->is_Mach() && last->as_Mach()->ideal_Opcode() == Op_Halt) ) { | |
| 2260 // There must be a prior call. Skip it. | |
| 2261 while( !bb->_nodes[--_bb_end]->is_Call() ) { | |
| 2262 assert( bb->_nodes[_bb_end]->is_Proj(), "skipping projections after expected call" ); | |
| 2263 } | |
| 2264 } else if( last->is_MachNullCheck() ) { | |
| 2265 // Backup so the last null-checked memory instruction is | |
| 2266 // outside the schedulable range. Skip over the nullcheck, | |
| 2267 // projection, and the memory nodes. | |
| 2268 Node *mem = last->in(1); | |
| 2269 do { | |
| 2270 _bb_end--; | |
| 2271 } while (mem != bb->_nodes[_bb_end]); | |
| 2272 } else { | |
| 2273 // Set _bb_end to point after last schedulable inst. | |
| 2274 _bb_end++; | |
| 2275 } | |
| 2276 | |
| 2277 assert( _bb_start <= _bb_end, "inverted block ends" ); | |
| 2278 | |
| 2279 // Compute the register antidependencies for the basic block | |
| 2280 ComputeRegisterAntidependencies(bb); | |
| 2281 if (_cfg->C->failing()) return; // too many D-U pinch points | |
| 2282 | |
| 2283 // Compute intra-bb latencies for the nodes | |
| 2284 ComputeLocalLatenciesForward(bb); | |
| 2285 | |
| 2286 // Compute the usage within the block, and set the list of all nodes | |
| 2287 // in the block that have no uses within the block. | |
| 2288 ComputeUseCount(bb); | |
| 2289 | |
| 2290 // Schedule the remaining instructions in the block | |
| 2291 while ( _available.size() > 0 ) { | |
| 2292 Node *n = ChooseNodeToBundle(); | |
| 2293 AddNodeToBundle(n,bb); | |
| 2294 } | |
| 2295 | |
| 2296 assert( _scheduled.size() == _bb_end - _bb_start, "wrong number of instructions" ); | |
| 2297 #ifdef ASSERT | |
| 2298 for( uint l = _bb_start; l < _bb_end; l++ ) { | |
| 2299 Node *n = bb->_nodes[l]; | |
| 2300 uint m; | |
| 2301 for( m = 0; m < _bb_end-_bb_start; m++ ) | |
| 2302 if( _scheduled[m] == n ) | |
| 2303 break; | |
| 2304 assert( m < _bb_end-_bb_start, "instruction missing in schedule" ); | |
| 2305 } | |
| 2306 #endif | |
| 2307 | |
| 2308 // Now copy the instructions (in reverse order) back to the block | |
| 2309 for ( uint k = _bb_start; k < _bb_end; k++ ) | |
| 2310 bb->_nodes.map(k, _scheduled[_bb_end-k-1]); | |
| 2311 | |
| 2312 #ifndef PRODUCT | |
| 2313 if (_cfg->C->trace_opto_output()) { | |
| 2314 tty->print("# Schedule BB#%03d (final)\n", i); | |
| 2315 uint current = 0; | |
| 2316 for (uint j = 0; j < bb->_nodes.size(); j++) { | |
| 2317 Node *n = bb->_nodes[j]; | |
| 2318 if( valid_bundle_info(n) ) { | |
| 2319 Bundle *bundle = node_bundling(n); | |
| 2320 if (bundle->instr_count() > 0 || bundle->flags() > 0) { | |
| 2321 tty->print("*** Bundle: "); | |
| 2322 bundle->dump(); | |
| 2323 } | |
| 2324 n->dump(); | |
| 2325 } | |
| 2326 } | |
| 2327 } | |
| 2328 #endif | |
| 2329 #ifdef ASSERT | |
| 2330 verify_good_schedule(bb,"after block local scheduling"); | |
| 2331 #endif | |
| 2332 } | |
| 2333 | |
| 2334 #ifndef PRODUCT | |
| 2335 if (_cfg->C->trace_opto_output()) | |
| 2336 tty->print("# <- DoScheduling\n"); | |
| 2337 #endif | |
| 2338 | |
| 2339 // Record final node-bundling array location | |
| 2340 _regalloc->C->set_node_bundling_base(_node_bundling_base); | |
| 2341 | |
| 2342 } // end DoScheduling | |
| 2343 | |
| 2344 //------------------------------verify_good_schedule--------------------------- | |
| 2345 // Verify that no live-range used in the block is killed in the block by a | |
| 2346 // wrong DEF. This doesn't verify live-ranges that span blocks. | |
| 2347 | |
| 2348 // Check for edge existence. Used to avoid adding redundant precedence edges. | |
| 2349 static bool edge_from_to( Node *from, Node *to ) { | |
| 2350 for( uint i=0; i<from->len(); i++ ) | |
| 2351 if( from->in(i) == to ) | |
| 2352 return true; | |
| 2353 return false; | |
| 2354 } | |
| 2355 | |
| 2356 #ifdef ASSERT | |
| 2357 //------------------------------verify_do_def---------------------------------- | |
| 2358 void Scheduling::verify_do_def( Node *n, OptoReg::Name def, const char *msg ) { | |
| 2359 // Check for bad kills | |
| 2360 if( OptoReg::is_valid(def) ) { // Ignore stores & control flow | |
| 2361 Node *prior_use = _reg_node[def]; | |
| 2362 if( prior_use && !edge_from_to(prior_use,n) ) { | |
| 2363 tty->print("%s = ",OptoReg::as_VMReg(def)->name()); | |
| 2364 n->dump(); | |
| 2365 tty->print_cr("..."); | |
| 2366 prior_use->dump(); | |
| 2367 assert_msg(edge_from_to(prior_use,n),msg); | |
| 2368 } | |
| 2369 _reg_node.map(def,NULL); // Kill live USEs | |
| 2370 } | |
| 2371 } | |
| 2372 | |
| 2373 //------------------------------verify_good_schedule--------------------------- | |
| 2374 void Scheduling::verify_good_schedule( Block *b, const char *msg ) { | |
| 2375 | |
| 2376 // Zap to something reasonable for the verify code | |
| 2377 _reg_node.clear(); | |
| 2378 | |
| 2379 // Walk over the block backwards. Check to make sure each DEF doesn't | |
| 2380 // kill a live value (other than the one it's supposed to). Add each | |
| 2381 // USE to the live set. | |
| 2382 for( uint i = b->_nodes.size()-1; i >= _bb_start; i-- ) { | |
| 2383 Node *n = b->_nodes[i]; | |
| 2384 int n_op = n->Opcode(); | |
| 2385 if( n_op == Op_MachProj && n->ideal_reg() == MachProjNode::fat_proj ) { | |
| 2386 // Fat-proj kills a slew of registers | |
| 2387 RegMask rm = n->out_RegMask();// Make local copy | |
| 2388 while( rm.is_NotEmpty() ) { | |
| 2389 OptoReg::Name kill = rm.find_first_elem(); | |
| 2390 rm.Remove(kill); | |
| 2391 verify_do_def( n, kill, msg ); | |
| 2392 } | |
| 2393 } else if( n_op != Op_Node ) { // Avoid brand new antidependence nodes | |
| 2394 // Get DEF'd registers the normal way | |
| 2395 verify_do_def( n, _regalloc->get_reg_first(n), msg ); | |
| 2396 verify_do_def( n, _regalloc->get_reg_second(n), msg ); | |
| 2397 } | |
| 2398 | |
| 2399 // Now make all USEs live | |
| 2400 for( uint i=1; i<n->req(); i++ ) { | |
| 2401 Node *def = n->in(i); | |
| 2402 assert(def != 0, "input edge required"); | |
| 2403 OptoReg::Name reg_lo = _regalloc->get_reg_first(def); | |
| 2404 OptoReg::Name reg_hi = _regalloc->get_reg_second(def); | |
| 2405 if( OptoReg::is_valid(reg_lo) ) { | |
| 2406 assert_msg(!_reg_node[reg_lo] || edge_from_to(_reg_node[reg_lo],def), msg ); | |
| 2407 _reg_node.map(reg_lo,n); | |
| 2408 } | |
| 2409 if( OptoReg::is_valid(reg_hi) ) { | |
| 2410 assert_msg(!_reg_node[reg_hi] || edge_from_to(_reg_node[reg_hi],def), msg ); | |
| 2411 _reg_node.map(reg_hi,n); | |
| 2412 } | |
| 2413 } | |
| 2414 | |
| 2415 } | |
| 2416 | |
| 2417 // Zap to something reasonable for the Antidependence code | |
| 2418 _reg_node.clear(); | |
| 2419 } | |
| 2420 #endif | |
| 2421 | |
| 2422 // Conditionally add precedence edges. Avoid putting edges on Projs. | |
| 2423 static void add_prec_edge_from_to( Node *from, Node *to ) { | |
| 2424 if( from->is_Proj() ) { // Put precedence edge on Proj's input | |
| 2425 assert( from->req() == 1 && (from->len() == 1 || from->in(1)==0), "no precedence edges on projections" ); | |
| 2426 from = from->in(0); | |
| 2427 } | |
| 2428 if( from != to && // No cycles (for things like LD L0,[L0+4] ) | |
| 2429 !edge_from_to( from, to ) ) // Avoid duplicate edge | |
| 2430 from->add_prec(to); | |
| 2431 } | |
| 2432 | |
| 2433 //------------------------------anti_do_def------------------------------------ | |
| 2434 void Scheduling::anti_do_def( Block *b, Node *def, OptoReg::Name def_reg, int is_def ) { | |
| 2435 if( !OptoReg::is_valid(def_reg) ) // Ignore stores & control flow | |
| 2436 return; | |
| 2437 | |
| 2438 Node *pinch = _reg_node[def_reg]; // Get pinch point | |
| 2439 if( !pinch || _bbs[pinch->_idx] != b || // No pinch-point yet? | |
| 2440 is_def ) { // Check for a true def (not a kill) | |
| 2441 _reg_node.map(def_reg,def); // Record def/kill as the optimistic pinch-point | |
| 2442 return; | |
| 2443 } | |
| 2444 | |
| 2445 Node *kill = def; // Rename 'def' to more descriptive 'kill' | |
| 2446 debug_only( def = (Node*)0xdeadbeef; ) | |
| 2447 | |
| 2448 // After some number of kills there _may_ be a later def | |
| 2449 Node *later_def = NULL; | |
| 2450 | |
| 2451 // Finding a kill requires a real pinch-point. | |
| 2452 // Check for not already having a pinch-point. | |
| 2453 // Pinch points are Op_Node's. | |
| 2454 if( pinch->Opcode() != Op_Node ) { // Or later-def/kill as pinch-point? | |
| 2455 later_def = pinch; // Must be def/kill as optimistic pinch-point | |
| 2456 if ( _pinch_free_list.size() > 0) { | |
| 2457 pinch = _pinch_free_list.pop(); | |
| 2458 } else { | |
| 2459 pinch = new (_cfg->C, 1) Node(1); // Pinch point to-be | |
| 2460 } | |
| 2461 if (pinch->_idx >= _regalloc->node_regs_max_index()) { | |
| 2462 _cfg->C->record_method_not_compilable("too many D-U pinch points"); | |
| 2463 return; | |
| 2464 } | |
| 2465 _bbs.map(pinch->_idx,b); // Pretend it's valid in this block (lazy init) | |
| 2466 _reg_node.map(def_reg,pinch); // Record pinch-point | |
| 2467 //_regalloc->set_bad(pinch->_idx); // Already initialized this way. | |
| 2468 if( later_def->outcnt() == 0 || later_def->ideal_reg() == MachProjNode::fat_proj ) { // Distinguish def from kill | |
| 2469 pinch->init_req(0, _cfg->C->top()); // set not NULL for the next call | |
| 2470 add_prec_edge_from_to(later_def,pinch); // Add edge from kill to pinch | |
| 2471 later_def = NULL; // and no later def | |
| 2472 } | |
| 2473 pinch->set_req(0,later_def); // Hook later def so we can find it | |
| 2474 } else { // Else have valid pinch point | |
| 2475 if( pinch->in(0) ) // If there is a later-def | |
| 2476 later_def = pinch->in(0); // Get it | |
| 2477 } | |
| 2478 | |
| 2479 // Add output-dependence edge from later def to kill | |
| 2480 if( later_def ) // If there is some original def | |
| 2481 add_prec_edge_from_to(later_def,kill); // Add edge from def to kill | |
| 2482 | |
| 2483 // See if current kill is also a use, and so is forced to be the pinch-point. | |
| 2484 if( pinch->Opcode() == Op_Node ) { | |
| 2485 Node *uses = kill->is_Proj() ? kill->in(0) : kill; | |
| 2486 for( uint i=1; i<uses->req(); i++ ) { | |
| 2487 if( _regalloc->get_reg_first(uses->in(i)) == def_reg || | |
| 2488 _regalloc->get_reg_second(uses->in(i)) == def_reg ) { | |
| 2489 // Yes, found a use/kill pinch-point | |
| 2490 pinch->set_req(0,NULL); // | |
| 2491 pinch->replace_by(kill); // Move anti-dep edges up | |
| 2492 pinch = kill; | |
| 2493 _reg_node.map(def_reg,pinch); | |
| 2494 return; | |
| 2495 } | |
| 2496 } | |
| 2497 } | |
| 2498 | |
| 2499 // Add edge from kill to pinch-point | |
| 2500 add_prec_edge_from_to(kill,pinch); | |
| 2501 } | |
| 2502 | |
| 2503 //------------------------------anti_do_use------------------------------------ | |
| 2504 void Scheduling::anti_do_use( Block *b, Node *use, OptoReg::Name use_reg ) { | |
| 2505 if( !OptoReg::is_valid(use_reg) ) // Ignore stores & control flow | |
| 2506 return; | |
| 2507 Node *pinch = _reg_node[use_reg]; // Get pinch point | |
| 2508 // Check for no later def_reg/kill in block | |
| 2509 if( pinch && _bbs[pinch->_idx] == b && | |
| 2510 // Use has to be block-local as well | |
| 2511 _bbs[use->_idx] == b ) { | |
| 2512 if( pinch->Opcode() == Op_Node && // Real pinch-point (not optimistic?) | |
| 2513 pinch->req() == 1 ) { // pinch not yet in block? | |
| 2514 pinch->del_req(0); // yank pointer to later-def, also set flag | |
| 2515 // Insert the pinch-point in the block just after the last use | |
| 2516 b->_nodes.insert(b->find_node(use)+1,pinch); | |
| 2517 _bb_end++; // Increase size scheduled region in block | |
| 2518 } | |
| 2519 | |
| 2520 add_prec_edge_from_to(pinch,use); | |
| 2521 } | |
| 2522 } | |
| 2523 | |
| 2524 //------------------------------ComputeRegisterAntidependences----------------- | |
| 2525 // We insert antidependences between the reads and following write of | |
| 2526 // allocated registers to prevent illegal code motion. Hopefully, the | |
| 2527 // number of added references should be fairly small, especially as we | |
| 2528 // are only adding references within the current basic block. | |
| 2529 void Scheduling::ComputeRegisterAntidependencies(Block *b) { | |
| 2530 | |
| 2531 #ifdef ASSERT | |
| 2532 verify_good_schedule(b,"before block local scheduling"); | |
| 2533 #endif | |
| 2534 | |
| 2535 // A valid schedule, for each register independently, is an endless cycle | |
| 2536 // of: a def, then some uses (connected to the def by true dependencies), | |
| 2537 // then some kills (defs with no uses), finally the cycle repeats with a new | |
| 2538 // def. The uses are allowed to float relative to each other, as are the | |
| 2539 // kills. No use is allowed to slide past a kill (or def). This requires | |
| 2540 // antidependencies between all uses of a single def and all kills that | |
| 2541 // follow, up to the next def. More edges are redundant, because later defs | |
| 2542 // & kills are already serialized with true or antidependencies. To keep | |
| 2543 // the edge count down, we add a 'pinch point' node if there's more than | |
| 2544 // one use or more than one kill/def. | |
| 2545 | |
| 2546 // We add dependencies in one bottom-up pass. | |
| 2547 | |
| 2548 // For each instruction we handle it's DEFs/KILLs, then it's USEs. | |
| 2549 | |
| 2550 // For each DEF/KILL, we check to see if there's a prior DEF/KILL for this | |
| 2551 // register. If not, we record the DEF/KILL in _reg_node, the | |
| 2552 // register-to-def mapping. If there is a prior DEF/KILL, we insert a | |
| 2553 // "pinch point", a new Node that's in the graph but not in the block. | |
| 2554 // We put edges from the prior and current DEF/KILLs to the pinch point. | |
| 2555 // We put the pinch point in _reg_node. If there's already a pinch point | |
| 2556 // we merely add an edge from the current DEF/KILL to the pinch point. | |
| 2557 | |
| 2558 // After doing the DEF/KILLs, we handle USEs. For each used register, we | |
| 2559 // put an edge from the pinch point to the USE. | |
| 2560 | |
| 2561 // To be expedient, the _reg_node array is pre-allocated for the whole | |
| 2562 // compilation. _reg_node is lazily initialized; it either contains a NULL, | |
| 2563 // or a valid def/kill/pinch-point, or a leftover node from some prior | |
| 2564 // block. Leftover node from some prior block is treated like a NULL (no | |
| 2565 // prior def, so no anti-dependence needed). Valid def is distinguished by | |
| 2566 // it being in the current block. | |
| 2567 bool fat_proj_seen = false; | |
| 2568 uint last_safept = _bb_end-1; | |
| 2569 Node* end_node = (_bb_end-1 >= _bb_start) ? b->_nodes[last_safept] : NULL; | |
| 2570 Node* last_safept_node = end_node; | |
| 2571 for( uint i = _bb_end-1; i >= _bb_start; i-- ) { | |
| 2572 Node *n = b->_nodes[i]; | |
| 2573 int is_def = n->outcnt(); // def if some uses prior to adding precedence edges | |
| 2574 if( n->Opcode() == Op_MachProj && n->ideal_reg() == MachProjNode::fat_proj ) { | |
| 2575 // Fat-proj kills a slew of registers | |
| 2576 // This can add edges to 'n' and obscure whether or not it was a def, | |
| 2577 // hence the is_def flag. | |
| 2578 fat_proj_seen = true; | |
| 2579 RegMask rm = n->out_RegMask();// Make local copy | |
| 2580 while( rm.is_NotEmpty() ) { | |
| 2581 OptoReg::Name kill = rm.find_first_elem(); | |
| 2582 rm.Remove(kill); | |
| 2583 anti_do_def( b, n, kill, is_def ); | |
| 2584 } | |
| 2585 } else { | |
| 2586 // Get DEF'd registers the normal way | |
| 2587 anti_do_def( b, n, _regalloc->get_reg_first(n), is_def ); | |
| 2588 anti_do_def( b, n, _regalloc->get_reg_second(n), is_def ); | |
| 2589 } | |
| 2590 | |
| 2591 // Check each register used by this instruction for a following DEF/KILL | |
| 2592 // that must occur afterward and requires an anti-dependence edge. | |
| 2593 for( uint j=0; j<n->req(); j++ ) { | |
| 2594 Node *def = n->in(j); | |
| 2595 if( def ) { | |
| 2596 assert( def->Opcode() != Op_MachProj || def->ideal_reg() != MachProjNode::fat_proj, "" ); | |
| 2597 anti_do_use( b, n, _regalloc->get_reg_first(def) ); | |
| 2598 anti_do_use( b, n, _regalloc->get_reg_second(def) ); | |
| 2599 } | |
| 2600 } | |
| 2601 // Do not allow defs of new derived values to float above GC | |
| 2602 // points unless the base is definitely available at the GC point. | |
| 2603 | |
| 2604 Node *m = b->_nodes[i]; | |
| 2605 | |
| 2606 // Add precedence edge from following safepoint to use of derived pointer | |
| 2607 if( last_safept_node != end_node && | |
| 2608 m != last_safept_node) { | |
| 2609 for (uint k = 1; k < m->req(); k++) { | |
| 2610 const Type *t = m->in(k)->bottom_type(); | |
| 2611 if( t->isa_oop_ptr() && | |
| 2612 t->is_ptr()->offset() != 0 ) { | |
| 2613 last_safept_node->add_prec( m ); | |
| 2614 break; | |
| 2615 } | |
| 2616 } | |
| 2617 } | |
| 2618 | |
| 2619 if( n->jvms() ) { // Precedence edge from derived to safept | |
| 2620 // Check if last_safept_node was moved by pinch-point insertion in anti_do_use() | |
| 2621 if( b->_nodes[last_safept] != last_safept_node ) { | |
| 2622 last_safept = b->find_node(last_safept_node); | |
| 2623 } | |
| 2624 for( uint j=last_safept; j > i; j-- ) { | |
| 2625 Node *mach = b->_nodes[j]; | |
| 2626 if( mach->is_Mach() && mach->as_Mach()->ideal_Opcode() == Op_AddP ) | |
| 2627 mach->add_prec( n ); | |
| 2628 } | |
| 2629 last_safept = i; | |
| 2630 last_safept_node = m; | |
| 2631 } | |
| 2632 } | |
| 2633 | |
| 2634 if (fat_proj_seen) { | |
| 2635 // Garbage collect pinch nodes that were not consumed. | |
| 2636 // They are usually created by a fat kill MachProj for a call. | |
| 2637 garbage_collect_pinch_nodes(); | |
| 2638 } | |
| 2639 } | |
| 2640 | |
| 2641 //------------------------------garbage_collect_pinch_nodes------------------------------- | |
| 2642 | |
| 2643 // Garbage collect pinch nodes for reuse by other blocks. | |
| 2644 // | |
| 2645 // The block scheduler's insertion of anti-dependence | |
| 2646 // edges creates many pinch nodes when the block contains | |
| 2647 // 2 or more Calls. A pinch node is used to prevent a | |
| 2648 // combinatorial explosion of edges. If a set of kills for a | |
| 2649 // register is anti-dependent on a set of uses (or defs), rather | |
| 2650 // than adding an edge in the graph between each pair of kill | |
| 2651 // and use (or def), a pinch is inserted between them: | |
| 2652 // | |
| 2653 // use1 use2 use3 | |
| 2654 // \ | / | |
| 2655 // \ | / | |
| 2656 // pinch | |
| 2657 // / | \ | |
| 2658 // / | \ | |
| 2659 // kill1 kill2 kill3 | |
| 2660 // | |
| 2661 // One pinch node is created per register killed when | |
| 2662 // the second call is encountered during a backwards pass | |
| 2663 // over the block. Most of these pinch nodes are never | |
| 2664 // wired into the graph because the register is never | |
| 2665 // used or def'ed in the block. | |
| 2666 // | |
| 2667 void Scheduling::garbage_collect_pinch_nodes() { | |
| 2668 #ifndef PRODUCT | |
| 2669 if (_cfg->C->trace_opto_output()) tty->print("Reclaimed pinch nodes:"); | |
| 2670 #endif | |
| 2671 int trace_cnt = 0; | |
| 2672 for (uint k = 0; k < _reg_node.Size(); k++) { | |
| 2673 Node* pinch = _reg_node[k]; | |
| 2674 if (pinch != NULL && pinch->Opcode() == Op_Node && | |
| 2675 // no predecence input edges | |
| 2676 (pinch->req() == pinch->len() || pinch->in(pinch->req()) == NULL) ) { | |
| 2677 cleanup_pinch(pinch); | |
| 2678 _pinch_free_list.push(pinch); | |
| 2679 _reg_node.map(k, NULL); | |
| 2680 #ifndef PRODUCT | |
| 2681 if (_cfg->C->trace_opto_output()) { | |
| 2682 trace_cnt++; | |
| 2683 if (trace_cnt > 40) { | |
| 2684 tty->print("\n"); | |
| 2685 trace_cnt = 0; | |
| 2686 } | |
| 2687 tty->print(" %d", pinch->_idx); | |
| 2688 } | |
| 2689 #endif | |
| 2690 } | |
| 2691 } | |
| 2692 #ifndef PRODUCT | |
| 2693 if (_cfg->C->trace_opto_output()) tty->print("\n"); | |
| 2694 #endif | |
| 2695 } | |
| 2696 | |
| 2697 // Clean up a pinch node for reuse. | |
| 2698 void Scheduling::cleanup_pinch( Node *pinch ) { | |
| 2699 assert (pinch && pinch->Opcode() == Op_Node && pinch->req() == 1, "just checking"); | |
| 2700 | |
| 2701 for (DUIterator_Last imin, i = pinch->last_outs(imin); i >= imin; ) { | |
| 2702 Node* use = pinch->last_out(i); | |
| 2703 uint uses_found = 0; | |
| 2704 for (uint j = use->req(); j < use->len(); j++) { | |
| 2705 if (use->in(j) == pinch) { | |
| 2706 use->rm_prec(j); | |
| 2707 uses_found++; | |
| 2708 } | |
| 2709 } | |
| 2710 assert(uses_found > 0, "must be a precedence edge"); | |
| 2711 i -= uses_found; // we deleted 1 or more copies of this edge | |
| 2712 } | |
| 2713 // May have a later_def entry | |
| 2714 pinch->set_req(0, NULL); | |
| 2715 } | |
| 2716 | |
| 2717 //------------------------------print_statistics------------------------------- | |
| 2718 #ifndef PRODUCT | |
| 2719 | |
| 2720 void Scheduling::dump_available() const { | |
| 2721 tty->print("#Availist "); | |
| 2722 for (uint i = 0; i < _available.size(); i++) | |
| 2723 tty->print(" N%d/l%d", _available[i]->_idx,_current_latency[_available[i]->_idx]); | |
| 2724 tty->cr(); | |
| 2725 } | |
| 2726 | |
| 2727 // Print Scheduling Statistics | |
| 2728 void Scheduling::print_statistics() { | |
| 2729 // Print the size added by nops for bundling | |
| 2730 tty->print("Nops added %d bytes to total of %d bytes", | |
| 2731 _total_nop_size, _total_method_size); | |
| 2732 if (_total_method_size > 0) | |
| 2733 tty->print(", for %.2f%%", | |
| 2734 ((double)_total_nop_size) / ((double) _total_method_size) * 100.0); | |
| 2735 tty->print("\n"); | |
| 2736 | |
| 2737 // Print the number of branch shadows filled | |
| 2738 if (Pipeline::_branch_has_delay_slot) { | |
| 2739 tty->print("Of %d branches, %d had unconditional delay slots filled", | |
| 2740 _total_branches, _total_unconditional_delays); | |
| 2741 if (_total_branches > 0) | |
| 2742 tty->print(", for %.2f%%", | |
| 2743 ((double)_total_unconditional_delays) / ((double)_total_branches) * 100.0); | |
| 2744 tty->print("\n"); | |
| 2745 } | |
| 2746 | |
| 2747 uint total_instructions = 0, total_bundles = 0; | |
| 2748 | |
| 2749 for (uint i = 1; i <= Pipeline::_max_instrs_per_cycle; i++) { | |
| 2750 uint bundle_count = _total_instructions_per_bundle[i]; | |
| 2751 total_instructions += bundle_count * i; | |
| 2752 total_bundles += bundle_count; | |
| 2753 } | |
| 2754 | |
| 2755 if (total_bundles > 0) | |
| 2756 tty->print("Average ILP (excluding nops) is %.2f\n", | |
| 2757 ((double)total_instructions) / ((double)total_bundles)); | |
| 2758 } | |
| 2759 #endif |